Ariston avsl 100 DIY repair

In detail: ariston avsl 100 do-it-yourself repair from a real master for the site my.housecope.com.

The versatility of Ariston washing machines makes them popular among consumers. Common models SM Hoitpoint-Ariston and Margarita-2000 are ergonomic, reliable, however, even such a technique can break.

It is important to distinguish between the main malfunctions of Ariston washing machines, to know how to fix them and repair them yourself.

The service life of the machine depends on the operating conditions. In the event of a problem, repair of Ariston and Hotpoint Ariston washing machines can be done by hand.

Let's look at the most common malfunctions that appear in cars of this brand.

Clogging is the most common cause of malfunctions in the CM. It prevents the normal draining of water from the tank, as a result, the washing machine cannot switch to the rinse mode. At the same time, the drain pump hums loudly while idling.

If the pump (drain pump) breaks down, the hum of the operating device is heard, but the water does not drain. You will not confuse a malfunction of the water intake valve with anything: even when the Ariston washing machine is turned off, water is taken spontaneously, a characteristic murmur is heard.

As a result of exposure to hard water, scale forms, and the tubular electric heater (TEN) fails. Breakage symptoms: water does not heat up, clothes are washed in cold water, or the washing program does not start at all.

If during operation in the spin mode a rumble and crackle is heard, the bearings have exhausted their resource. You can’t continue to operate the machine, otherwise it will work for wear. The problem of changing bearings is that the wash tank is not separable.

Video (click to play).

Read on to learn how to disassemble the Ariston washing machine and fix the breakdown.

A fairly common malfunction is wear and loosening of mechanical fasteners. For example, a hatch door may not close due to a skewed or broken hook. If the door is not tightly closed, you will not be able to start the wash.

More rare, but still possible failure. Appears due to high humidity, foam on the board, sudden power surges.

The control module is the "brain" of the Ariston washing machine, therefore, if it breaks down, any CMA parts can fail to work.

Washing machines Ariston, Hotpoint Ariston, Akvaltis, Margarita and other models are equipped with a self-diagnosis function. The system displays a fault code, deciphering which, the user can understand the cause of the breakdown.

A CM with a scoreboard or display will flash an error code on the screen. Those models that do not have a display (such as "Margarita 2000") will give an error by flashing indicators.

How to recognize a code without a scoreboard? For example, the F02 error will be displayed as follows: the light blinked 2 times, paused, then again gave the code 2 times. The number of flashes depends on the fault code.

We list the error codes for SM Ariston: F01, F02, F03, F04, F05, F06, F07, F08, F09, F10, F11, F12, F13, F14, F15, F17, F18.

A short circuit has occurred in the engine control circuit.

1. Remove excess moisture from the controller contacts.

2. Replace controller or motor.

The signal about the operation of the motor does not reach the electronic controller from the tachogenerator.

1. Check the tightness of the connections between the motor and the controller.

2. Check the rotor for blockage.

3. Measure the resistance of the winding of the tachometer with a tester.

4. Replace controller or motor.

Breakage of the temperature sensor, "sticking" of the heating element relay.

1. Inspect the temperature sensor connections to the control unit.

2. Check the sensor with a tester. When broken, it needs to be replaced.

Malfunction of the pressure switch (water level sensor).

1. Make sure the contacts between the sensor and the module are strong.

2. If there is a problem, the pressure switch or controller must be replaced.

Problems with the operation of the drain pump.

1. Check the quality of the connections between the module and the pump.

2. Check the pump and pressure switch with a tester.

3. Remove any blockages.

4. Change pump or water level sensor.

Button error on the control panel.

1. Inspect the wiring connecting the controller to the buttons.

2. Check the functionality of the buttons on the panel.

3. Replace panel or control module.

1. Make sure that the connections between the pressure switch and the module are secure.

2. Check level sensor and heater.

3. Replace sensor or heater.

Malfunction of the pressure switch, problems with the heating element relay.

1. Inspection of the water level sensor.

2. Quality control of the wiring between the heater and the control unit.

3. Replacing the pressure switch, block.

Error (failure) of volatile memory.

1. Flashing the microcircuit.

No signal from water level sensor.

1. Wiring control between the sensor and the control unit.

2. Checking the sensor and block. Replacing a broken part.

No signal from drain pump.

1. Checking the pump and the quality of its connection with the controller.

2. Make sure the pressure switch is working.

3. Replacement of a defective element.

Lost communication between controller and display module.

1. Make sure the connections haven't come loose.

2. Replace the defective element.

Open or malfunction of the drying temperature sensor circuit (for the AVD and AVL line).

1. Inspection of the temperature sensor connections with the control unit.

2. Make sure the temperature sensor is working.

3. Replace the broken part.

The drying heater does not turn on (for the AVD and AVL line).

Breakage of the drying relay (for the AVD and AVL line).

2. Check and replace the level sensor.

Problems with the microprocessor.

Knowledge of the device and circuit of the Ariston automatic washing machine will help determine the breakdown. The picture shows the location of the main SMA nodes.

Let's figure out how to carry out an independent repair of the Hotpoint Ariston washing machine.

Which parts get clogged most often and what to check first:

Drain filter. Open the front panel of the washer, after substituting a container to drain the water. The round part on the right is the filter. Unscrew it and remove debris.
Sewerage and drain hose. Remove the hose and rinse under a high pressure faucet. Inspect the place where it connects to the sewer, perhaps debris has also accumulated there. It is necessary to thoroughly clean everything with special means.

If your actions did not lead to the elimination of the malfunction, you need to check the drain pipe.

Make sure there is no water in the tank and dispenser.
Turn off all communications and electricity.
Lay the machine on its side.
Below you will see a pipe from the tank to the pump.
Squeeze the clamp connecting the tank and pump.
Disconnect the hose clamp from the tank.
Unscrew the pressure chamber and remove the clamp.
Remove the pipe, check for blockage.
If the pipe is not in the best condition, it must be replaced; installation is in reverse order.

To make sure that the drain pump is malfunctioning, check:

Pull out the pump filter.
Start the Spin program.
Use a flashlight to look into the hole.
If you see that the impeller is spinning, everything is in order. If it stands still, a blockage has formed, or the pump has broken.

Remove the old pump (pump) and install a new one will help the following steps:

Lay the SM on the left side, having previously disconnected from the network and communications.
Loosen the two screws in front.
Disconnect the hoses.
Pull out the pump and unscrew the three bolts securing the pump shell to the engine.
Replacement is done in reverse order.

Measure the resistance of the filling valve with a multimeter:

The valve is located at the point where the Ariston washing machine is connected to the water intake hose.
Inspect gaskets for damage.
Take the tester and attach its tentacles to the valve contacts. Normal indicators are 30-50 ohms.
In the event of a breakdown, it is easy to replace the valve: unscrew it from the washer body and install another one by connecting all the connections. See the video for more details:

To get to the heater, you will need to remove the back wall of the Ariston washing machine. Below is the heating element, as shown in the photo.

Before taking out the electric heater, measure its resistance with a multimeter. An indicator of 1 ohm indicates an open circuit, about 0 ohm - a short circuit has occurred. A serviceable device will show 25-30 ohms.

Apply the tester as in the photo:

If a part is defective, replace it. Video to help you:

Changing bearings with your own hands is not easy: you need to disassemble the machine and get the part right.

But if you solve the problem yourself, carefully study the instructions for the Ariston washing machine with vertical and front loading. Watch additional video:

Your washing machine door may not close or lock. The problem may be in the warp of the door, as a result of which the hook does not reach the hole. It is enough to tighten the side loops. If the latch tongue is worn out, or the handle on the door is loose, only replacing the elements will help.

How to remove the control box:

Pull the plug from the socket, turning off the power to the machine.
Remove the top cover.
Pull out the dispenser by pushing the latch in the center.
Unscrew the front panel.
Release the clamps and disconnect the board.
Remove the selector and put a new board on it, and then reassemble in reverse order.

Installing a new block is not difficult. It is more difficult to repair and clean contacts. If you decide not to call the master, but to do the work yourself, watch the video:

Having understood the main causes of malfunctions of the Ariston washing machine, you can fix them yourself. Be attentive to details and do not neglect safety precautions.

Models of Hotpoint and Margarita washing machines from the Italian manufacturer Ariston are rightfully considered one of the most reliable, ergonomic and high-quality among numerous competitors. However, even with them, sometimes unforeseen failures occur, which can be completely eliminated with your own hands.

Before you start repairing the machine, you should first figure out what most often malfunctions lead to the failure of the unit and determine the code of possible malfunctions.

The stability of the Ariston machines, first of all, depends on their correct operation. If there are certain problems, then you can try to fix them on your own, without resorting to the help of a specialist. But for this you need to figure out what most often can cause malfunctions.

Perhaps one of the most common causes of problems in the operation of the machine is blockages that prevent the passage of water during the process of draining it, which, in turn, leads to the inability of the washer to reconfigure the rinse mode. Characteristic signs of this problem are idling, loud noise and the impossibility of passing water through the hose (or very poor water permeability). As for places of blockage, then they can be concentrated:

in the drain hose itself, and in most cases blockages occur if it is installed incorrectly;
often blockages form in the drain filter itself;
blockages may occur in the pipe, which is located between the drain filter and the tank;
and also in the pump, although this is an extremely rare practice.

In order to correct the situation and eliminate the malfunction, it is enough to clean the machine from blockages in accessible places (pump, hose, drain pump or pipe).

The second problem that can be encountered during the operation of Ariston machines is lack of water heating during the erasing process. Often, in such a situation, the washing machine can be shocked due to dysfunction of the insulation of the heating element.

The main reason that provokes such a malfunction is extremely hard water, resulting in the formation of scale. Repair consists in replacing a damaged electric heater (heater). To do this, unscrew the back panel of the machine, since it is behind it that the fastener of the broken electric heater is located. First, disconnect all contacts and unscrew the fixing screw, then carefully pull out the broken heater and replace the part with a new one. Everything, the malfunction is fixed, and the machine should heat the water, as before.

The most difficult problem is the breakdown or partial wear of the bearing or seal at Ariston. Fortunately, in practice, it is extremely rare.

To understand that machine malfunctions are result of bearing failurejust pay attention to the following signs:

during the operation of the unit, all moving elements of the washing machine begin to make characteristic sounds during the spin cycle;
in this case, the shaft begins to come into contact with the sleeve;
vibrations are possible.

It must be said right away that this problem should be removed promptly, because otherwise you can just break the machine. The only difficulty is that the repair will require almost complete disassembly of the machine. Therefore, if there is no confidence in your actions, it is best to entrust this process to a professional.

In this case, most likely there is a malfunction associated with socket or power cord. To check the operation of the outlet, just try turning on another electrical appliance. If everything is in order with the outlet, then you need to check the wire itself. To do this, it must be disconnected from the outlet and try to “ring” with a special tester.

In the event that the electrical wire is normal, then most likely the problem is hidden directly in the power supply of the machine. This is a rather complex problem, so only an experienced professional can solve it.

It is interesting! How to open the washing machine yourself if it is blocked

Another problem that can cause the machine to stop working is no drum rotation. There are several reasons that can cause such a situation: engine breakdown; problems with electrical wiring; collection in the operation of the control panel or clogging of the filter. However, the most common cause is wear or severe stretching of the belt. In this case, it is required to replace it - there should not be any special problems with self-replacement.

If the reason is different, then it is best to call a professional at home to identify the cause of the breakdown of the machine.

An equally common problem that users of Ariston Hotpoint or Margarita typewriters may encounter is a malfunction that occurs directly in the control unit. The main reason for this problem is a malfunction of our power grids, which is extremely problematic to deal with on our own.

In this case, the problem is easier to prevent than to fix. Therefore, before you start operating the washing machine, in particular, Ariston, it is best to put special protective equipment, which help protect the washer from power surges and other similar failures. This approach will be much more efficient and economical than replacing the entire control unit.

Operational problems may also arise during loose or broken mechanical fastenerswith which the machine is equipped. Most often, this is expressed in weakening the fixation of the hatch of the machine. The problem has the following symptoms: strong noise during the operation of the washer and characteristic vibrations. To get rid of this, it is enough to tighten or completely replace the fasteners with new ones.

It should be noted that such models of Ariston washing machines as Margarita 2000, Hotpoint, Avsl 109 and others have unique self-diagnosis function. The bottom line is that the system independently detects a malfunction and shows on the display or by flashing indicators, its specific code. Having an idea of \u200b\u200bwhat code number the unit shows, you can independently identify the problem and fix it.

It is interesting! Reasons why the washing machine does not draw water

Having an idea of what most often failures can occur in Ariston typewriters, you can try independently repair the unit. However, it should be started only if there is confidence in their actions. If there is no experience in such things, it is best to entrust the repair of the washer to a specialist.

Many have faced situations when the washing machine has broken down, and funds do not allow contacting the service center, or it is far away, or communication with its employees is so difficult that it is easier to buy a new appliance than to seek help.But if you have basic skills in working with household appliances, you can try to troubleshoot and repair the Ariston washing machine with your own hands. You just need to get additional information about the types of breakdowns and methods of repair. Read about all this below.You need to start by determining the cause of the breakdown. An approximate diagnosis (where to look for the problem) can be suggested by the symptoms that the owner notices:

The machine, in old age, had noise during the spin cycle, or the quality of the wash noticeably decreased. It may be a blockage, and blockage may accumulate due to a pump (pump) malfunction.

The laundry is still wet after the spin cycle. A bad spin can be the result of a problem with the drain hose, or the same blockage and breakdown of the pump.

Water drains too slowly. Check the level switch (pressure switch), drain hose, or the same pump.

The water does not heat up - the heating element has burned out. Heating elements that are forced to work with hard water fail faster.

A special category of breakdowns, when work begins to be accompanied by various noises. Listen well and determine the nature of the sound, and at what point it begins.A creak that continues all the time of washing and spinning. There are three options:

Shock absorbers worn out. These are peculiar legs with which the drum rests against the body, they are designed to dampen vibration. The resource of elements is gradually running out, and this can happen faster than usual if the unit was not installed very correctly. The distortion creates a large load on one of the shock absorbers. And to replace, as a result, both will have to.

The springs are worn out. The tank is hung on them. Over time, they also lose elasticity and need to be replaced. It does not make sense to change them one at a time - the load will be uneven and the second will fail after the first.

Drive belt. Stretching and loosening of the drive belt also occurs over time, but is especially severe with frequent overloads.

Diagnostics of malfunctions of the washing machine Ariston

A creak is heard only in the spin mode, or a knock that accompanies the entire washing process:

Foreign object. Small objects can sometimes slip between the drum and the rubber band. Such interference may not interfere with the regular operation of the machine, but at high speeds, a sound is already heard. If the item is not removed, it may jam the drum.
Loose drum mount.
The hull mount has loosened.

A "clunking" metallic sound is heard. This is a major overhaul. It's most likely the shaft bearings. They have either begun to rust, or are already crumbling. In any case, seals and bearings must be replaced immediately!

Polish Hansa washing machines are not yet as popular as some other brands, as they have appeared on the market relatively recently.Some models of this brand sometimes cause trouble for their owners in the form of unexpected breakdowns. Hans washing machine: do-it-yourself repair. Consider how to replace the heater, drive belt, bearings.

What problems in Bosch washing machines you can fix with your own hands, you will learn by reading this article.

Whirlpool brand machines break down relatively rarely, but if a breakdown occurs, you need to be ready to fix it. Here https://my.housecope.com/wp-content/uploads/ext/740/cancliz/mnogokvartirnyie-doma/santehnika/stiralnaya-mashina-virpul-remont-svoimi-rukami.html is all about the main malfunctions of the unit and how to repair.

Let's take a look at some common problems and solutions.

If the water does not drain well, the spin cycle does not work satisfactorily, or there is a hum during the spin cycle, all these may be indicators that there is a blockage somewhere:

Most often, the drain filter is clogged.
Less often, but the pump itself can become clogged.
Further it can be a drain hose.
Or in the pipe between the tank and the drain filter.

The easiest way to get to the drain filter is to start inspecting the system with it. The lower narrow panel can be easily removed - there are no screws, you just need to carefully pick up the slot and remove the panel from the latches. On the right there will be a round part that needs to be unscrewed (after placing a rag, as the water that has collected there will pour out of the filter). Garbage is removed manually.

It happens that large debris gets stuck before reaching the drain filter. To clean the pipe between the tank and the filter, or to inspect the pump, you will need to remove the front or bottom panel of the housing. Before doing anything, the machine must be disconnected from the mains and shut off the water supply.

The machine can be put on its side so that the pump is in its upper part (or you can access the parts by removing the back wall - as you like). A rag and a basin will come in handy (the rest of the water will merge from the pump). The bottom panel is removed after a few screws are unscrewed.

The pipe between the tank and the filter is a corrugation. Its clamp is loosened, the pipe is removed.

To understand if there is a blockage here, the corrugation needs to be crushed and squeezed in different parts or looked at the light. If there is a large object, you can feel it with your hands.

The wires are disconnected from the pump and the clamps holding the pipe are loosened.

To clean the pump impeller, it must be removed. A screwdriver twists two screws that connect together the two halves of the pump body. Now the impeller is inspected (turn the blades - the stroke should be free).

You can diagnose the failure of the drain pump if you remove the filter, put the machine in drain mode and look inside the hole (you will need a good flashlight). If the impeller is in place, then either there is a blockage or the assembly is faulty. How to check for blockage is described in the previous subheading.

Another common problem may be that due to hot water, the pump body and the blades are deformed, touch it and cannot spin freely. What to do:

The pump is disconnected from all wires and hoses.
The body of the part is untwisted.
The screws that secure the pump snail to its body are unscrewed.
The marker marks the position of the engine in relation to the snail.
The engine is removed from the snail.
Each blade of the impeller is cut with a sharp knife. You need to cut just enough so that the stroke is free, but not too much so as not to negate the performance of the pump.
Now everything is assembled in the reverse order and a test run is done.

If the problem is more serious, you will have to order a new pump and replace the failed one.

A water-folding (filler or inlet) valve is an electromagnetic device that supplies the required amount of water to the machine and closes the inlet when the amount of liquid is sufficient. Malfunctions can be caused by:

Burnout of the electrical part;
Loss of elasticity in membranes;
blockage.

The unit can be accessed by removing the rear or top panel of the housing (turn off the power first, shut off the water inlet and completely drain the remaining water from the unit).

The following checks are performed:

To check the valve for blockage, the water supply hose is unscrewed, the filter mesh is removed and cleaned.
Now you can unscrew the valve from the body, connect the fluid supply hose to it and open the supply valve. So the valve is checked for leakage.
The performance of the coils is checked by applying a voltage of 220 to them in turn. A serviceable device will alternately let water pass from the tube that corresponds to the energized section.
An ohmmeter checks the resistance on the coils. Normally, the device should show 2 - 4 kOhm.

In addition to blockage, it is better not to try to fix another malfunction in the filler. Valves are non-repairable parts, in case of breakage, they are replaced.

If the water does not heat up during washing, it is necessary to check the heating element. The back cover of the unit is removed. Under the drum you can see the back side of the heater - a small socket to which the wires fit (power, ground and temperature sensor). The wires must be removed after de-energizing the device.

The heating element needs to ring. The normal resistance for a particular heater can be calculated using the formula: R = U 2 :P

Where U is 220, and P is the power of the heating element (the data can be found in the instructions for the machine, or by requesting a specific Ariston model in the Internet search line). The result will be the resistance value that the tester should output.

Replacing the heating element of the washing machine

The number 1 on the screen of the Ohmmeter means that the circuit is open and the heating element needs to be replaced. An indicator close to 0 means that there is a short circuit somewhere.

But even if the tubular spiral is in good condition, you need to check if the heater does not penetrate the body. To check, the multimeter is switched to ringing mode, and the two wires of the heater are connected to each other. The multimeter should beep and light the indicator. Now you need to touch one end of the heater body, and the other - its terminals. If the tester squeaks, there is a breakdown on the body and you need to change the element.

The weak point of Ariston washing machines is their non-separable tank.

The manufacturer tried to do everything so that a simple replacement of bearings was impossible.

However, nothing is impossible for people with hands!

The above methods are successfully used by masters - nuggets, however, these operations cannot be called simple. Therefore, if you do not have enough skills, it is better to provide repairs to a proven service center.

The washing machine, like other appliances, likes to break down at the most inopportune moment. However, do not panic, because most of the breakdowns you are able to fix on your own. Do-it-yourself Beko washing machine repair - the next article is devoted to this.

To cope with the main breakdowns of Samsung washing machines, the information in the following topic will help you.

Ariston washing machines from an Italian manufacturer can be called a "model of reliability and quality", but they sometimes require attention. Repair of Ariston washing machines in some cases can be done by hand, and a specialist needs to be involved only in the most difficult cases.

In this article, we will analyze the frequent malfunctions of Hotpoint Ariston automatic washing machines, study the “symptoms” of such breakdowns and decide how to properly repair it yourself.

The vast majority of breakdowns of Ariston washing machines are related to their operation. This is recognized by the masters of service centers for the repair of washing machines. Sometimes we are talking about frankly improper operation, the user regularly makes gross mistakes, which lead to a breakdown. But most often, the cause of the breakdown is the operating conditions, which the user either did not know about, or guessed, but did nothing. A vivid example is hard water, which can completely disable the “home helper”!

So, what breakdowns are most often found on Hotpoint Ariston washing machines? We decided to compile a kind of rating of the frequency of breakdowns. When compiling the rating, we rely on statistical data provided by the leading service centers for the repair of washing machines.

blockages. Blockages themselves can hardly be considered breakdowns; rather, they are the cause of various breakdowns. However, it is blockages that craftsmen have to deal with most often, and it is strong blockages that most often paralyze the operation of various Hotpoint Ariston washing machines.
A heating element. In second place in our ranking is ten. Despite the fact that the heating element itself is of high quality, low-quality hard water does its job. Over time, the scale layer destroys even the best part and it has to be changed.
Water pump. In third place is the drain pump or pump. This part fails quite rarely and in most cases the reason is wear and tear from long-term operation.
Fill valve. Even more rarely, the filling valve fails. More precisely, not even the valve itself, but a rubber gasket. Rubber becomes dull over time and begins to let water through, this causes a malfunction. The gasket itself costs a penny, but the services of a master in replacing this gasket cannot be called cheap.
Bearings and seals. In fifth place are the breakdowns of bearings and seals. On Hotpoint Ariston washing machines, this is a rarity, but if such a breakdown occurs, you cannot continue to operate the machine.

Important! The electrics and electronics of the Hotpoint Ariston washing machine are intentionally not included in the rating, since it breaks very rarely.

If you have problems with blockages on the Hotpoint Ariston washing machine, do not rush to call the master, everything can be repaired quickly, with your own hands. How do you know that you are dealing with a blockage? The main sign of a blockage in the drain system is the idle operation of the drain pump, that is, it buzzes, but the water does not leave the tank. Usually, this trouble appears after the end of washing, the machine cannot drain the waste water to start rinsing and freezes, or it drains the water too slowly.

Strong blockage can be in several places:

in the drain pipe, between the tank and the drain filter - this happens less often, since the pipe is quite thick;
in the drain filter - there the blockage forms most often;
in the pump - in Ariston washing machines, blockages in the pump are rare, since an additional filter is installed in front of the drain pump;
in the drain hose - blockages rarely occur, mainly in cases where the hose was not installed correctly.

How to quickly clear blockages? First of all, you need to check and clean the easily accessible places of the washing machine where a blockage could occur. First, unscrew the drain filter, which is located on the Ariston machines at the bottom right under the narrow panel. Before unscrewing the filter, put a rag under it, as water will flow from it. Remove all debris from the filter, and then screw it back on.

Next, it is important to check the drain hose and sewer. In some situations, a banal blockage in the drain pipe can force the user to turn to machine repair specialists when it would be more correct to turn to plumbers. And if everything is in perfect order, then it will be necessary to disassemble the machine, clean the nozzles and the pump. To remove the pipe, you will need to loosen two clamps, and to remove the pump, you will need to disconnect it from the sensors and unscrew the two fasteners.

If any malfunction occurs, the Hotpoint Ariston “washer” gives an error with a certain code displayed on the screen. It is very important to correctly recognize the error codes of Ariston washing machines, because this is a direct clue indicating the cause of the breakdown.

A broken inlet valve “according to symptoms” is quite difficult to confuse with other breakdowns of the Hotpoint Ariston washing machine. When the inlet valve stops shutting off the water, water begins to flow into the washing machine tank by gravity, even if the “home assistant” is turned off from the network.

If you hear the characteristic murmur of water being poured into and drained from the tank when the machine is turned off, be sure this is a valve.

To check the filling valve, you need to remove the top cover of the Hotpoint Ariston machine by unscrewing the two fasteners. The valve is located at the junction of the inlet hose with the body of the machine. First of all, we check the gaskets, if they are intact, then you need to measure the resistance of the device, and for this you will have to use a multimeter. We install the probes on the contacts of the filling valve and check. The device should show approximately 30 to 50 ohms.

A defective filling valve should be replaced with a similar one; self-repair is not possible. The replacement itself is done very quickly, we unscrew the old valve from the body and screw in the new one, not forgetting to connect the sensors. It is worse if the pump fails, because this is a rather expensive part.

A faulty pump gives itself out during washing, when the machine should drain the water, but it does not, while the pump either does not make any sounds at all, or it buzzes, but the murmur of the drained water is not audible.

Note! Strictly speaking, these symptoms are superficial and may be indicative of other problems (such as electronics), but it should make you think about checking the pump first.

In the Hotpoint Ariston washing machine, it is located at the bottom and you can get to it through the bottom. It is better to check and replace the drain pump by a specialist, but you can do everything yourself, the main thing is to thoroughly study the progress of work.

The heating element is an important part of the washing machine, responsible for the temperature of the water in the tank, and therefore for the quality of the wash. If the heating element is faulty, the wash either does not start at all, and the system gives an error, or the wash is performed in cold water. Both should prompt you to check and replace the heating element in the Hotpoint Ariston washing machine.

Checking the heating element of the Ariston washing machine is not difficult at all. It is necessary to deploy the machine, in the lower part of the rear wall there is a service hatch, which is attached to the clamps and several self-tapping screws. We unscrew the screws, and squeeze the latches with a screwdriver, after which the cover will be removed. Behind the lid, under the tank, you will see two large contacts with a fastener in the middle - this is the heating element. We unscrew the screw, and then we begin to pull the heating element towards ourselves, pulling it out with swaying movements.

Note! Before pulling out the heating element, it’s a good idea to measure the resistance with a multimeter, perhaps the device is working, and you don’t need to touch it.

As we have already noted, failures of bearings and seals are the most rare malfunctions of Ariston washing machines. However, if this happens, urgent action must be taken. Recognizing such a breakdown is not difficult. When the bearing is destroyed, the moving elements begin to make unpleasant sounds, the shaft begins to rub against the bushing, which leads to wear. And if you do not take any measures and continue to wash, then this can lead to the fact that the drum will begin to play and damage the tank.

So that your favorite washing machine does not end up in a landfill, you need to contact a specialist when such sounds appear, or try to change the bearings yourself. If you are determined to do the work yourself, study the information offered on our website. Otherwise, with such a complex repair, it is not surprising to make serious mistakes. The main difficulty is that in order to get to the bearings, you need to disassemble the entire washing machine, along with the tank.

In addition, it will be necessary to correctly remove the old bearings without damaging the sleeve, and then correctly install the new ones so that re-repair is not required.Without proper skill, self-repair is not possible for many, so before taking on work, consider delegating it to a specialist.

In conclusion, we note that it is theoretically possible to repair malfunctions of Ariston machines with your own hands, especially if you have the time and patience. But still, in order to avoid mistakes and unnecessary expenses, it is better to contact a specialist because “the miser pays twice”!

Video (click to play).