Do-it-yourself automotive repair tools

In detail: do-it-yourself car repair tools from a real master for my.housecope.com.

Factory tools are undoubtedly necessary things, but sometimes do-it-yourself car repair and care tools are in no way inferior to factory ones.

The car needs two types of repairs: quick and long. The first type involves a certain replacement of spare parts - most often, it is necessary to replace only one. The second type, however, involves partial or complete work on the repair of the machine.

There are the following subspecies of car repair:

Actual. It involves the replacement of individual parts only when it is completely out of order, for example, repair of the brake system.
Planned repair. It is being produced according to the schedule. Most often, it is used in the repair of public or special transport.
Complete renovation. It is necessary in case of failure of several departments of the car at once, which require its complete disassembly and reassembly of all spare parts.

Thus, based on the types of repair, the following methods can be distinguished:

Individually for every detail. It involves the removal of individual parts, repair and reinstallation. This is the longest type of repair - complete. With this type, you have to wait quite a long time for its completion.
Fast way. In this case, the defective parts are removed first, and then the working ones are immediately inserted. This type of repair is called actual. It takes about an hour, during which there is a complete replacement of failed parts.
Self repair. It involves the implementation of independent repair actions in relation to your car. It can combine all types of repairs at once - depending on the severity of the repair.

Video (click to play).

With this type of repair, the main rule is to prepare in a timely manner and constantly transport with you tools and devices for car repair.

They can be located in one of two options: in a special box or a special cassette. It is a piece of foam in which a hole is cut.

All other parts are attached to the bottom of the car.

These containers will include the following types of tools:

This is a whole DIY car repair tool.

Read about the repair of cars of all brands here. Is it possible to repair the bumper with your own hands? See this article.

As for the devices made by hand, the following points can be noted here:

Rags. They should be wide and made of dense fabric. The best choice would be rags or canvas fabrics. They are least prone to chafing and last longer without forming holes. They can wipe excess oil, hands or wipe glass. An important rule to remember is that if oil appears on a rag, it should be disposed of, as this can lead to ignition.
Spare parts. In the case of replacement of contacts or other parts of the car, the parts that are least worn out can be reused for preliminary repairs with the possibility of arriving at the repair site.
Additional details. These include a radiator cap, a pump for gasoline, fuses and additional belts. All of them tend to fail at the wrong time. With their presence, this situation is easy to correct.
Additional wheel. If you are in a deserted area, only it will help in case of a broken old wheel.
Cigarette lighter.It is needed to charge the battery from another car.
First aid kit. It should contain all the necessary medicines and first aid supplies.
Gloves. They should be woolen with the ability to perform such dirty and difficult work as pulling a car out of a swamp or replacing a dirty wheel.

Such homemade car repair tools will help you cope with car repairs in difficult conditions.

Auto repair is an expensive and time-consuming task. Using a car service requires additional investments, so many owners prefer to solve car problems on their own. But to accomplish this task, you need a set of tools and special equipment for body repair, with which the order of service workers is not required. Do-it-yourself car repair and maintenance devices are a suitable solution if there is no money to use a car service.

Hydraulics is a set of tools used to restore the body. The special tool for auto repair belongs to the group of equipment used for straightening. Hydraulics are sold in sets that differ in tonnage.

The standard hydraulic kit consists of:

hydraulic pump;
extension cords;
nozzles with a large selection of shapes.

These devices are a must have for every car owner who wants to do their own repairs. Sets vary in price. For do-it-yourself restoration work, it is possible to find equipment at an average cost.

The price depends on the quality and brand under which the tools are produced. Therefore, expensive and budget options do not always differ in characteristics.

There are various categories of welding machines that differ in functionality and purpose. If it is necessary to weld the frame, or perform a similar task, AC equipment is recommended. But this tool is ineffective if you need to remove minor defects. Additional devices such as clamps are also required. They make the task easier to complete.

For self-maintenance, it is recommended to use:

tungsten electrode;
carbon dioxide semi-automatic;
clips for body repair.

Welding machines differ in the quality of the seam. The range is also represented by simple and complex devices. When purchasing welding equipment, it is necessary to determine what indicator of the quality of work is provided, and whether the car owner can handle it.

Straightening is a set of actions in which the vehicle or parts are fully restored. The task is performed by tools for straightening car repairs, the purpose of which is to eliminate dents and body defects.

The list of devices for straightening consists of:

complex of straightening hammers;
inertialess hammer;
vacuum hammer;
reverse hammer;
straightening edits;
mallets;
spoons;
shock cloths and curly rods;
leveling stand for pulling out individual parts of the body surface;
hooks and levers;

The vacuum straightening method is intended for professional workers. Such devices are equipped with suction cups, which are not easy for an inexperienced repairman to handle. Therefore, the method of restoring a car using vacuum hammers is not widely used.

Effective straightening hammers are double-sided devices. The sides of the tools are of different shapes, so they are used for a complex of tasks. This special tool is used in conjunction with additional tools.

Read also: Kia sportage 3 DIY repair

The list of additional tools included in the body straightening kit includes:

anvil - a hand-held device with which dents are leveled;
blocks for notches - equipment that increases the accuracy of strikes (can be made independently);
grinder - a device for body repair, which smooths out irregularities;
welding spotter;
jack - a unit used to support a vehicle.

The quality of straightening is higher if parts without painting are processed separately from the car on a surface covered with felt. This material is able to reduce the impact load applied to the machine components.

Despite the voluminous list of straightening tools, few devices are large in size. Thanks to this, the equipment does not take up much space in the garage or trunk of a car.

Body repair includes painting, without which it will not be complete. This task also requires special devices. The list of the most necessary tools for painting consists of:

sprayer - a device used for applying paint and primer;
spray gun;
airbrush.

In the conditions of a car service, all types of tools are used. But to apply paint to the surface, one of these devices will be enough. The best option is selected depending on what work is planned to be performed. If the surface for painting is small, you should use an airbrush. But this device will not have the desired effect for large surfaces. In addition, compressors are required that can create the necessary pressure for spraying paint.

After painting, a grinding machine is used to improve the surface quality.

Grinding and polishing is done with fine finishing tools. This category of equipment is used for stripping. The minimum required list of devices for grinding and polishing includes:

sandpaper;
grinders;
polishing machines.

The sandpaper used for this purpose should have a grit of P120 to P500.

If sheet metal is cleaned or putty is processed, a body file is used. This device has a curved holder that can change the geometry. It is needed to perform the processing of hard-to-reach places.

If a surface with a large area is being processed, the use of power tools is an acceptable option. These devices are effective in cleaning large irregularities. Power tools also eliminate excess paint and primer.

Plastic is used for welding. This material melts under the influence of high temperatures. Because of this, it has found wide application in the repair of vehicles.

The material is processed using special tools for car repair. The use of plastic is carried out using:

soldering iron - a tool for repairing a bumper; electric and air tools are used - the option is less common due to the high cost;
thermal gun - effective if you need to repair a part by removing surface dents; gives plastic flexibility, due to which a component of the required shape is created from it;
air dryer - it is also desirable to use an air dryer, with which plastic is quickly processed.

Auto repair is carried out not only with the use of special tools, but also thanks to consumables. Each car owner who performs a minimum list of repair actions should have these devices.

Materials for a full body repair are presented:

cleaning agents;
degreasers;
antistatic substances;
polishes;
anti-gravel agents.

Consumables are complemented by elements used for protection when performing vehicle maintenance. These are useful tools that simplify the restoration of a car.The list also includes devices for measuring, or performing other related tasks. Most appliances do not require much storage space. The accessories category includes workbenches and shelving when used for repairs.

Car repair is a serious and responsible job that requires certain knowledge and skills. There are operations that even a beginner can handle. But many types of repairs require serious experience and some training.

However, any car repair specialist was once a beginner - each of us even did the most familiar work once for the first time.

Therefore, if you are determined to master the ability to repair a car with your own hands, do not be afraid to start. Learn, be attentive, pay attention to every little thing, and after a while you will acquire all the necessary skills.

Car repair tools

You will also need a special tool for car repair - as you understand, it is impossible to do without it.

To do many jobs with your own hands, you will need various tools and materials - they will be used to fix nodes, assemble and disassemble, eliminate defects, etc.

Let's figure out what special tools and fixtures you may need during do-it-yourself car repair.

Basic car repair tools

To begin with, consider the regular set of tools that you will need not only to have in the garage, but also to carry with you. Situations are different - it happens that a breakdown forces you to work with your hands right on the spot, preventing you from reaching the garage. For this purpose, you must have the following special kit with you:

Screwdrivers - without them, any work with the machine is rarely done. You will need two varieties:
with slot;
with cross tip.

Since you may need different sizes, it's best to carry a multi-purpose screwdriver with different types of bits.

Screwdriver multifunctional with nozzles

Adjustable wrench - it may be needed when the force of the pliers is not enough to unscrew the stubborn bolt;

Adjustable ratchet wrench

Jack - will be needed in order to raise the car or hold it, for example, when changing a wheel. There are 3 popular types of jack:
screw;
rack;
pneumatic.

It is believed that the screw jack is the most convenient - it is compact and efficient.

Mechanical screw jack

Socket wrenches for unscrewing heads. They can have a 6-angle and 12-angle head.
Set of spanners. Should be as large as possible. The car has a huge variety of nuts, so this set will be essential for you.
Several hammers of different sizes. A light hammer is used to knock out bolts, nuts and studs. The heaviest is needed for wheel replacement operations, door repairs and other heavy work.
Pliers.
Wire cutters.
Rope for towing cars. It must be unworn, reliable, non-slip and not damaged.

Machine repair tools

In addition to the standard set of tools, it is advisable for you to carry with you special devices and materials that you may need to do your own work at the site of the breakdown:

spare parts - it is advisable to have with you small spare parts that may be needed during the repair. These can be bolts, nuts, gaskets, hoses and the like;
spare parts and assemblies: belts, fuel pump, fuses and other little things that can let you down on the road;
spare wheel - if you punctured the wheel, only the spare tire will save you;
cigarette lighter - it will come in handy if it becomes necessary to charge the battery from another car;
wool gloves - come in handy so as not to injure your hands during hard work;
clean dry rags and rags - they are used to wipe hands or car components from dirt, dust and oil.

It is quite logical that you do not need to carry an entire workshop with you. However, if you want to do all the car repairs yourself, if possible, your garage should be part-time and a car repair shop.There should be all the tools for auto repair and special equipment for a more serious event than troubleshooting on the spot.Your garage should have:

quality lighting - no matter how strange it may sound, the light source plays a huge role in car care. Your eyes should not get tired of bright light. At the same time, it is difficult to overestimate the importance of a full review of any areas of work;

welding machine - it is likely that you will have to perform welding operations on metal elements. Therefore, if possible, it is worth acquiring a welding machine;

welding machine

Please note that its operation will require certain skills from you. Before you start work, practice well.

straightening spotter with all accessories. It is used to straighten parts of the car body and for spot welding;
sandblasting machine. It is used for cleaning and degreasing various surfaces. It is indispensable in the fight against emerging foci of corrosion, as well as when repainting car components;
a set of tools for non-welding straightening: hammers, shovels, mandrels, etc.;
vise;
Sander. It can also be an ordinary grinder that can grind and cut;

Sander

electric drill;
milling machine;
pneumatic spray gun for painting surfaces;
a set of manual metalwork tools: chisels, punches, barbs, etc.;
measuring instruments: calipers, tape measures, etc.

Measuring tape

It is quite logical that this list can be continued indefinitely - its length depends on your knowledge, skills, financial capabilities and willingness to delve into the intricacies of the process.

It is likely that you will undertake only simple DIY work, and for more serious maintenance, contact an automotive service station.

Any car repair specialist uses tools that can hardly be called standard, but they make your life a lot easier. Let's consider some of them:

gate for places with difficult access. If you're having a hard time getting to the bolt, a ratchet wrench will help you get through it effortlessly;

ratchet collar

needle air hammer. Removes any scale, rust and paint like a sandblaster. The needles (12 or 19 pcs.) are located on the handle, which is attached to the compressor. With the help of pneumatics, this device very effectively taps and cleans the surface;
wrench - a cap ring with a cutting tooth inside. If the rusted nut does not give in, we throw on the ring, press the cutting tooth and apply force until the nut breaks. At the same time, the bolt thread remains intact: we put on a new nut, make a passage with grease - and the problem is solved;

Do-it-yourself car repair involves a serious base of tools, fixtures and materials. Without the availability of mandatory standard tools, car repair will simply be impossible.

Therefore, if you plan to repair your machine yourself, it will be very useful to know what tools and fixtures are used for various operations. The success of the work, as well as the time spent, depend on how fully and competently staffed your workshop.

For the rational use of space, communications and do-it-yourself garage accessories from improvised materials are used.It is necessary to involve the walls, the underground level in the process, to place machines inside the room, to organize normal lighting.

Homemade garage fixtures

For comfortable operation of the premises intended for storing cars, you should follow certain recommendations:

the tool must be as accessible as possible;
storage areas equipped with shelves / racks are much more convenient;
workbenches, a viewing hole, home-made machines and do-it-yourself garage accessories expand the capabilities of the car owner;
the cellar allows you to save the space of the site;
the quality of lighting depends on the performance of work, minor repairs.

Organization of workspace inside the garage

Depending on the dimensions of the building, the area occupied by equipment, fixtures, communications should not be more than 10 - 20% of the size of the garage floor.

In 80% of cases, do-it-yourself garage fixtures are built to store accessories, tools, and car equipment. It should be noted that the most bulky parts of the car are sets of winter / summer tires, depending on the season.

It is more convenient to store wheels on brackets of the following design:

two triangular frames from a corner, connected by jumpers from any rolled metal;
triangles are attached to the wall, the wheels are installed perpendicular to the supporting structure, slightly falling between the jumpers.

Wheel storage brackets

This is the most economical option for storing rubber in the off-season. The most demanded by motorists are straight and corner workbenches. The lower space is usually filled with shelves or drawers; grinding machines and a vice are located on the table top.

Homemade garage workbench

An example of organizing a corner workplace

A folding workbench can be very convenient

Wood is a versatile material for both workbenches and shelving.

It is easier to build a wooden workbench on your own, but it has a smaller resource than an analogue from rolled metal that needs to be welded. If corners for shelves are not laid in the load-bearing walls during construction, it is easier to make racks from rolled metal or lumber.

Homemade garage shelving

Use for glass bottle racks

Built-in wardrobes are very compact

Original hanging shelves are suitable for storing long items

The design and layout of shelving inside each garage is too individual to follow general guidelines.

An inspection hole becomes a necessary device for a garage with your own hands. Moreover, the owner does not have to do all the repairs himself. Underground communication can be used in the following cases:

inspection of the running, steering, braking system before a long trip;
an oil change that saves money and does not take much time;
minor repairs, which allows the qualification of the owner.

The entrance to the cellar is more convenient to arrange from the pit, as this will allow you to concrete several steps instead of using a ladder.

The main nuances of these structures are:

swelling of clay soils is harmful to underground structures;
therefore, all elements of the pit and cellar are insulated with polystyrene foam from the outside;
in the underlying layer before concreting, backfilling of the sinuses of the pits, sand or crushed stone is used;
along the perimeter of underground structures at the level of the sole, drains are laid to collect and drain water.

The width of the pit should allow the driver to drive into it without lighting.

In garages, parallel lighting circuits are more often used. One lamp allows you to use a specific area, several devices are turned on during a major repair, a visit to the cellar. The minimum power consumption is provided by LED lamps.Daylight devices have a large resource.

Cars use poisonous, harmful fuels and lubricants, so do-it-yourself garage ventilation devices are becoming relevant, allowing you to create air exchange. The inflow is organized from below:

Ventilation of the garage and cellar under it

The hood is mounted under the ceiling of the cellar, the roof of the garage or has the form of air vents in the main walls at the highest points.

Related article:

Do-it-yourself ventilation in the garage. From this publication you will learn why garage ventilation is so important, what air exchange schemes exist, and installation nuances.

Useful do-it-yourself garage accessories can be made from used utensils, inventory, materials left after construction. For example, by gluing the lids of plastic jars horizontally / vertically, the owner gets a convenient transparent dish for equipment or hardware, which is always at hand.

Device for storing small parts, tools, hardware

Interesting PVC Pipe Screwdriver Storage Rack

From a power tool, you can assemble home-made machines and accessories for the garage:

Drilling machine from a drill

The advantage of the machines is more precise positioning of the tooling relative to the workpiece. The equipment turns out to be collapsible, the drill and the angle grinder can be removed mono, used for its intended purpose.

Related article:

Lathe for metal for the garage. Types of machines, specifications, design, overview of popular models in a special publication of our online magazine.

The simplest design of a hydraulic press is obtained from an automobile hydraulic jack. For pressing out / pressing in bearings, pressing / compressing parts, you will need to build a frame and a removable movable stop. The frame consists of 4 channels welded to each other. At the top, the structure is reinforced with stiffening ribs (kerchiefs), at the bottom, transverse corners are added to give the frame stability.

Do-it-yourself hydraulic press from a jack

The stop is pulled up in the normal position to the upper crossbar of the frame by powerful springs. A hydraulic jack is installed between them, which, if necessary, presses the stop to the lower crossbar of the frame. The force of the press is regulated by a jack, the dimensions of the working area are selected depending on the size of the workpieces.

And finally, a few more examples of useful things for the garage.

Pockets for storing cutting discs from disposable plates

Device for convenient use of threads and ropes

PVC pipe cuts are the ideal material for creating convenient storage areas.

Convenient pull-out racks for tool storage

In this topic, drawings of pullers and devices for car repair, as well as drawings of a special tool, will be given.

The following drawings are currently available:

Drawing of the front suspension strut nut puller.

Drawing of a universal screw puller for steering pins.

Drawing couplers springs front and rear suspension.

Drawing of a puller for pressing out the silent block of the rear suspension shock absorber.

Drawing of a puller for pressing the silent block of the rear suspension shock absorber.

Drawing of a wheel bearing puller for the front and rear wheels.

Wheel bearing knockouts

Photo of knockouts for knocking out a wheel bearing

Mandrels for pressing wheel bearings

Photo of mandrels for pressing the wheel bearing of the front and rear wheels VAZ-2108, VAZ-2109, VAZ-21099, VAZ-2113, VAZ-2114, VAZ-2115. The photo also shows rings from old wheel bearings, they also help with pressing.

Drawing of a puller for replacing the rubber-metal hinges of the rear beam.

Replacing the rubber-metal hinges of the rear beam

Drawing of a puller for replacing the silent blocks of the front suspension arm.

Puller for replacing silent blocks of the front suspension arm

Device for compression of brake cylinders.

The brake cylinder compression tool is made from old brake pads. Everything seems to be visible in the photo.

Photo of a brake cylinder compression tool.

Drawing of brake cylinder compression tool

Comments left: 1857

Activity: December 14, 2017

Registration date: October 18, 2018

A simple circuit for protecting a car battery from overcharging on a TL431 and a relay.

An easy way to protect your car battery from reverse polarity.

How to make an engine start button with your own hands based on the Attiny2313 microcontroller that costs only $1.

Useful tips for Hyundai Solaris owners: a homemade compartment for small things, the option of installing a spike sign, the option of storing an emergency stop sign.

Today we have a new useful homemade product for cars: a homemade oil filter puller for Hyundai Solaris

Hello to all! Today we will make a knob for a car gearbox.

Today we have a new useful homemade product for cars: do-it-yourself oil separator for ventilation of crankcase gases.

Today we will tell you how to independently replace the brushes of the generator voltage regulator.

Our collection of useful homemade products for cars has replenished! Today we will tell you how to make passenger handrails for a motorcycle with your own hands.

Today we have another useful homemade product that will be of interest to both children and adults - a homemade velomobile.

Less and less free space remains under the hood of a modern car. The manufacturer strives to use every square centimeter of space around the engine. For a car mechanic, these are additional problems, since it is becoming more and more difficult to get to dismantle a part, more and more hard-to-reach places become.

Here, I picked up a very interesting list of 19 special professional tools and devices that can help solve this problem.
Of course, some tool may seem very exotic and little used in work, but every auto repairman who is more or less engaged in professional car repair would want to have some positions in his garage.

LED lamp, made in the format of a "police baton" with magnetic mounts.
It is very convenient to use when working under the bottom of the car or under the hood. Strong magnets will hold the lantern in place without any problems, and the 200-degree swivel tube can be rotated exactly where you need a bright light. Can work both from an onboard network, and from the battery.

The ability to switch the brightness more / less and its own rechargeable battery allow the lamp to work offline for up to 8 hours. And as a bonus, it's a great way to light up your garage when the power goes out.

Working under the hood in the engine compartment, sometimes you have to face the problem of unscrewing and tightening the bolt, especially if it is in a hard-to-reach place and is tightened with a decent moment.
And here such a special wrench operating in ratchet mode can come in handy.

A very interesting manual pneumatic tool, one might say percussion. Something reminded me of sandblasting, but everything is much simpler.
By connecting it to the compressor without much effort, you can beat off rust, scale after welding or old paint.

The principle of operation is simple - steel needles (options from 12 to 19 needles are possible) at a speed of 4000-4600 beats per minute (depending on the model) will knock out corrosive places to pure iron. It is especially convenient when used in hard-to-reach places where the brush cannot be reached.

When working with this tool, you should use personal protective equipment: tight gloves, goggles and headphones.

With this special tool (I call it a wrench) you can break any nut if it is impossible to unscrew it.
Surely any of you have come across rusted nuts, especially when overhauling the chassis, tearing off the splines and cursing.
Now everything is simple: put on the ring, brought the hardened “tooth” to the nut and twist until it just breaks the nut. A big plus of such a tool is that the thread on the bolt or stud is not damaged, all that remains is to throw off the broken nut and drive a new one with oil along the thread.

You probably have a lot of pliers in your arsenal of tools, but there definitely aren’t any!
Have you noticed that when you try to grab a small part in an uncomfortable place with ordinary pliers, your hand makes it difficult to see the process, blocking it?
Kiwi pliers, so named for some resemblance to this New Zealand bird, will solve this problem - it will be more convenient to work.

Having such a set, where each head has its own cordan, you get additional opportunities when working in hard-to-reach places of the car. These sockets have a much shorter body than normal sockets when used with the stock gimbal in the kit.
Minus one, this set is not cheap.

When disassembling a car for repair, it is often necessary to disconnect various electrical connectors.
In the latest car models, they are often combined with plastic fasteners and detaching without a special tool can easily damage them.
With this set of hooks, almost any connector can be conveniently disconnected without breaking it.

If you try to pull out the candle cap with ordinary pliers, you can easily damage the rubber cap or the wire itself. So they came up with such an interesting gadget - special pliers for removing high-voltage wires from the candle terminal.

There are cases when, when performing repair work, it is necessary to jack up two places at once.
This problem can be solved by using a jack head with two independent (adjustable) seats. This fixture is installed instead of a regular saddle. You can lengthen the arm to the desired size, as well as rotate the crossbars around the central axis of the jack.

Tightening the bolts without a special torque wrench, without taking into account the recommended tightening torques, can cause serious damage to the car.
As a rule, a professional auto repairman who respects his client in the workshop has several different torque wrenches for different tasks. Now, this amount can be replaced by purchasing one electronic digital adapter and using it with a ratchet or other wrench with a half-inch adapter. The digital display will show the current torque and beep when the correct torque is reached.

How much time can be spent looking for a just unscrewed part: “I just put it somewhere here ...” a bolt, a nut and similar little things that are always lost.
A very interesting solution is a magnetic badge on the belt. Just stick an unscrewed screw (nut) to it and you won’t have to look for it when the part is needed again.

Here are six more interesting mini sets of special tools for working in hard-to-reach places during disassembly-assembly. Here, in principle, everything is clear where and how they can be used.

Set of four short screwdrivers.
A set of ratchet and bits with various curly tips: stars, hexagons, squares.
A flexible extension with a magnetic tip that can accommodate a variety of bits or sockets.
Miniature rotating gimbal with ¼ inch adapter.
Set of three special ratchets.
A set of 90-degree ratchet screwdriver and bits for it.

Interesting, I don't even know what to call it.
The platform is mounted directly on the wheel, has several adjustments, both in width and in height. It is very convenient when you are repairing a high jeep or minibus.Of course, you can use, for example, a box to stand higher, but standing on a box is somewhat inconvenient and you can easily, at the most unnecessary moment, drive away from the wheel, and all that remains for you is to slow down with your face on the hood ... probably everyone knows?

Mirror on a telescopic handle and two magnets included (one swivel).
Every auto repairer should have this kit.
Imagine the situation that when unscrewing the nut, you did not hold it, and it fell somewhere on the engine or gearbox. How to find and get it?
And here, a mirror and a magnet will come to your aid.

Looking at this set of special keys, it is immediately clear what it is intended for.
Using the extension and ratchet from the standard set of sockets, you can tighten almost any "uncomfortable" nut in the engine compartment. Perfect for dismantling the steering gear or brake system.

This special torque wrench will prevent you from accidentally stripping threads in modern aluminum engines. If you did not decide to purchase an electronic device for controlling the tightening torque, about which it was a little higher, then this very inexpensive key will be accurate enough and just what the doctor ordered.
Two models of this tool (almost complete coverage of all values) will undoubtedly be a good purchase for your garage.

Undoubtedly, everyone has come across this "nightmare" - when a rusted old bolt is unscrewed, its cap breaks off (breaks off) and that's it ...
Dances with a tambourine begin, drilling, restoration of threads with a tap, etc.

With this set, in the photo below, you solve the whole problem at once in a complex. It has everything to accurately drill and extract what is left of a bolt with a diameter of 5 mm to 16 mm from the body.

If you still use an analog tester to test electrical circuits, then there is a very high probability that you will damage the car's on-board computer.
The digital tester is safe because it does not use a ground cable. You simply stick it into the test socket or pierce the insulation of the wire (the stainless steel tip is sharp enough) and with your other hand touch any metal part of the car to complete the circuit.
The test works from 3 to 24 volts DC. It is possible to set a sound signal or turn on the LED to signal the presence of voltage.

A very useful tool for removing antifreeze hoses. After several years of operation, the antifreeze hoses in the places where they are tightened with clamps firmly stick to the pipe. If you don't want to cut the hose when removing it and save it for later installation, then this special hook tool is what you need.
Simply insert the pointed end under the hose and pull it around the pipe.
This cool tool will help you save a lot of money.

You can buy these and other sets on the largest portal amazon.com, you just have to look, some keys can be both in the metric system and in inches.
It is not so easy to buy such a tool in Russia, except to search in online stores.

By adding a comment you agree to the Privacy Policy.

By continuing to use Sam-Avtomaster.com, you acknowledge the site's use of your browser's cookies to improve offers and services based on your preferences and interests. More.

This Personal Data Privacy Policy (hereinafter referred to as the Privacy Policy) applies to all information that the Sam Avtomaster Internet site located on the domain name my.housecope.com/wp-content/uploads/ext/1451 can receive about the User while using our site.

This Privacy Policy applies only to the Sam Automaster website.
The Site guarantees that it will not damage the User's computer or infect it with viruses.

The site administration does not verify the accuracy of personal data provided by the User when sending an electronic message.

To view information on the Sam-Avtomaster.com website, registration with personal data is not required. When a User visits our site, no personal information is collected. It is possible to browse the site anonymously.

The e-mail address, as well as the postal address specified when filling out the fields of the comment form, order form and contact form is not shown to other visitors to the site. We may store comments, e-mail messages sent by Users on the server in order to process requests, answer questions and improve site services.

Personal data authorized for processing under this Privacy Policy is provided by the User by filling out a contact form, an order form and a form for adding comments on the site and may include the following information:

When a User visits a website, one or more cookies are sent to their computer.
This is a small file that contains character sets and which allows you to identify the User's browser.
We use cookies to improve the quality of our services by saving user preferences and tracking trends in user behavior, such as when performing searches or displaying ads. Most browsers are initially set to accept cookies, but the User can completely disable the use of cookies or set notifications about their sending. However, some features of the site may not work properly without cookies.

Each time you visit the site, our servers automatically record information that the User's browser transmits when visiting web pages. Typically, this information includes the requested web page, computer IP address, browser type, browser language settings, date and time of the request.

Links on this site may be in a format that allows you to track whether visitors use them. This information is used to improve the quality of our advertising.

The site administration has the right to make changes to this Privacy Policy without the consent of the User.

The new Privacy Policy comes into force from the moment it is posted on the Automaster Sam website, unless otherwise provided by the new version of the Privacy Policy.

Video (click to play).

All suggestions or questions regarding this Privacy Policy should be reported to the Site Administration through the CONTACTS page.