Car wash calm do-it-yourself repair

In detail: car wash calm do-it-yourself repair from a real master for the site my.housecope.com.

Cleaning the garage, warehouse, car cleaning, and even your own summer cottage, becomes simple and easy if you purchase special equipment for this - a pressure washer. It is difficult to imagine a car service without a car wash; it can also be used to wash concrete mixers, pipes and other equipment well. Everyone knows very well how convenient pressure washers are for farmers - cleaning of stables and agricultural machinery turns into a quick procedure that even a beginner can master.

The cost of the device varies from 4,000 to 20,000 rubles, depending on the material used in the manufacture of the body and other important parts of the tool. Experts note the excellent quality of brass products, the pistons of which are made of cermet. The correct choice of a pressure washer is not complete without due attention directed to the supplied attachments, it is good if the following components are included:

cutters designed for working with dirt;
sandblasting and suction tip;
a variety of brushes;
corner nozzles.

To ensure a long service life of your pressure washer, use a water filter to protect the inner hose structure from contaminated fluid flow. At the end of each work, unused water must be drained from the equipment and pressure must be relieved.

Such preventive measures will save the equipment from sudden breakdown, but this does not mean at all that a situation will not come when a full repair of the device is required. You can do it yourself, for this you just need to know some of the subtleties of modifying the instance.

The main malfunction that can manifest itself after several years of active operation of the equipment is the bearing, which serves as a support for the swash plate pressing on the valve.

How does a breakdown manifest itself in Karcher:

The pressure washer runs jerkily, the engine regularly refuses to start, and a knock is heard from inside the structure.
The engine does not work at all, hums very much and heats up, literally plows with heat.

In this case, do-it-yourself Karcher sink bearing repair is the following sequence of manipulations:

Remove the hose with the gun.
Carefully disassemble the housing base, take out the electric motor equipped with the cylinder head.
Unscrew 6 self-tapping screws from the electric motor, the caps of which are made in the form of stars.
Open the box where the breaker is located and dispose of the capacitor along with the 2 power terminals coming from the breaker. Put the spring in a secluded place, if you lose it, it will be almost impossible to find the exact same part in stores.
Using a vertical stand, fix it firmly to the floor.
Place the pressure washer on this support with the electric motor pointing downwards.
Unscrew the 4 screws carefully by 13.
Oil will start to spill from the equipment, be careful.
Drain the oil into a container and set aside the rubber seal.
Inspect the condition of the clip with balls.
Armed with a screwdriver that allows you to remove the sprocket-head mounts, remove the center bolt. To do this, clamp the shaft on the other side using a gas wrench.
Replace the bearing that is now visible.
The assembly of the equipment is carried out in the reverse order.
Do not forget to add new oil to the inside of the Karcher pressure washer.

Video (click to play).

Video instructions for eliminating possible breakdowns of Karcher equipment can be viewed below:

Before determining the method of how to repair the sink with your own hands, you need to determine the exact cause of the breakdown. The list of main faults includes:

Reducing the pressure supply. In this case, there can be no question of any performance, the time of the procedure immediately increases. Repair consists in eliminating damage to the oil seals. Why do the oil seals break? Long-term use and low-quality impurities, substances in the water used spoil and quickly wear out the material. Nothing can be done here, except how to replace the oil seals with your own hands.
One of the valves is defective. It is unlikely that you will be able to do it yourself, repair is most likely impossible without diagnostics with special equipment in the service center.

So that you do not have to face the listed malfunctions in the operation of the Shtil and Champion sinks, you should adhere to important rules and requirements:

Pay attention to the quality of the water used, the liquid must not be contaminated.
Repair of the pressure washer is not necessary if you make it a rule to carry out regular preventive maintenance of the product.
Pay attention to proper voltage and change oil on time

Do-it-yourself sink repair is, of course, a useful and developmental business, but it's better to never face this need. The correct choice of a high-quality installation will help to avoid unexpected and premature breakdowns. On this issue, experts give several practical recommendations:

"Champion" will appeal to those who appreciate the reliability and ease of use of technology.
"Calm" is a surprisingly compact high-pressure washer, no less durable than the first instance.
"Hooter" is universal, it makes it possible to use it in different jobs, but experienced clients already know that the Chinese "Hooter" often requires repair with their own hands.

Finally, it is worth noting that Interskol is highly productive, but despite this, it costs moderately, which is very pleasing for people who are strapped for money or do not want to spend a lot on a pressure washer.

Service center "Servy" performs post-warranty service and repair of mini washers, sinks and high pressure washers "Stihl" - the entire range of household and professional, electric and gasoline mini-washers, sinks and high-pressure washers Stihl.

Model range of Stihl mini washers, washers and high pressure washers accepted for repair
The cost of repairing mini-washers, sinks and high-pressure washers Stihl