Do-it-yourself car wash

In detail: do-it-yourself car wash calm repair from a real master for the site my.housecope.com.

Image - Do-it-yourself car wash do-it-yourself repair

Cleaning a garage, a warehouse, cleaning a car, and even your own summer cottage, become simple and easy if you purchase special equipment for this - a high-pressure washer. It is difficult to imagine a car service without a car wash; it can also be used to wash concrete mixers, pipes and other equipment well. Everyone knows how convenient high pressure washers are for farmers - cleaning stables and agricultural machinery turns into a quick procedure that even a beginner can master.

The cost of the fixture varies from 4,000 to 20,000 rubles, depending on the material used in the manufacture of the body and other important parts of the instrument. Experts note the excellent quality of brass products, the pistons of which are made of cermet. The right choice of pressure washer is not complete without due attention to the included nozzles, it is good if this includes the following components:

  • cutters designed to work with dirt;
  • sandblasting and pumping tip;
  • various brushes;
  • corner nozzles.

In order for the high pressure washer to show a long service life, use a water filter that will protect the internal structure of the hoses from contaminated fluid flow. At the end of the work, each time you need to drain the unused water from the equipment and release the pressure.

Such preventive measures will protect the equipment from sudden breakdown, but this does not mean at all that there will not be a situation when a full repair of the device is required. You can make it yourself, for this you just need to know some of the subtleties of modifying the instance.

Image - Do-it-yourself car wash do-it-yourself repair

The main malfunction, which may appear after several years of active operation of the equipment, is the bearing, which serves as a support for the swash plate that presses the valve.

How the breakdown manifests itself in Karcher:

  1. The high-pressure washer works jerkily, the engine regularly refuses to start, a knock is heard from inside the structure.
  2. The engine does not work at all, it hums very strongly and heats up, it literally plows with heat.

In this case, do-it-yourself repair of the Karcher sink bearing is the following sequence of manipulations:

  1. Remove the hose from the gun.
  2. Carefully disassemble the housing base, remove the electric motor equipped with the cylinder head.
  3. Unscrew 6 self-tapping screws from the electric motor, the heads of which are made in the form of stars.
  4. Open the block where the switch is located and get rid of the capacitor along with the 2 power terminals coming from the switch. Put the spring in a secluded place, if you lose it, it will be almost impossible to find exactly the same part in stores.
  5. Using some kind of vertical stand, firmly fix it on the floor.
  6. Place the pressure washer on this support with the motor facing down.
  7. Carefully unscrew the 4 bolts by 13.
  8. Oil will begin to pour out of the equipment, be careful.
  9. Drain the oil into a container and set aside the rubber seal.
  10. Inspect the condition of the clip with balls.
  11. Using a screwdriver that allows you to remove the star-shaped fasteners, disconnect the bolt located in the center. To do this, clamp the shaft from the other side with a gas wrench.
  12. Replace the bearing, which is now visible.
  13. The assembly of the equipment is carried out in the reverse order.
  14. Do not forget to fill the inside of the Karcher high pressure washer with new oil.
Video (click to play).

Video instructions for eliminating possible breakdowns of Karcher equipment can be viewed below:

Before determining the method of how to repair a sink with your own hands, it is necessary to determine the exact cause of the breakdown. The list of major faults includes:

  1. Decreased supply pressure. There can be no question of any performance in this case, the time of the procedure immediately increases. Repair consists in eliminating damage to the seals. Why do seals break? Long-term use and low-quality impurities, substances in the water used spoil and quickly wear out the material. There is nothing you can do here, except to replace the oil seals with your own hands.
  2. One of the valves is faulty. It is unlikely that you will be able to do it yourself, repair is most likely impossible without diagnostics with special equipment in a service center.

So that you do not have to deal with the listed malfunctions in the operation of the "Calm" and "Champion" sinks, you should follow the important rules and requirements:

  1. Pay attention to the quality of the water used, the liquid must not be contaminated.
  2. Repair of a pressure washer will not be necessary if you make it a rule to carry out regular preventive maintenance of the product.
  3. Focus on proper voltage and change oil on time

Image - Do-it-yourself car wash do-it-yourself repair

Repairing a sink with your own hands is, of course, a useful and developing business, but it’s better to never encounter this need. The right choice of a quality installation will help to avoid unexpected and premature breakdowns. On this issue, experts give several practical recommendations:
  1. "Champion" will appeal to those who appreciate the reliability and ease of use of technology.
  2. Stihl is a surprisingly compact pressure washer, no less durable than the first copy.
  3. "Hooter" is universal, it makes it possible to use it in different jobs, however, experienced customers already know that the Chinese "Hooter" often requires do-it-yourself repairs.

Finally, it is worth noting that Interskol is highly productive, but, despite this, it costs moderately, which is very pleasing to people who are short of money or who do not want to spend a lot on high-pressure washing.

The service center "Servy" performs post-warranty maintenance and repair of mini sinks, sinks and pressure washers "Stihl" - the entire range of household and professional, electric and gasoline mini-washers, sinks and high-pressure devices Stihl.

Image - Do-it-yourself car wash do-it-yourself repair

  • Model range of Stihl mini-washers, sinks and high-pressure cleaners accepted for repair
  • The cost of repairing mini-sinks, sinks and high-pressure cleaners Stihl
Read also:  Do-it-yourself repair of a baler prf 750

We repair the following models of household and professional high-pressure washers and high-pressure cleaners (HPA) Stihl:

RELATED ARTICLESMORE FROM THE AUTHOR