Beko dis 5831 DIY repair

Banned

Messages: 531

Dishwasher BEKO DIS 5831,
looking for any service information.

First dishwasher under renovation.

Manifestation of a malfunction - fills with water, heats and drains.
By key combinations, an error code was read - 03, 07, 08 ..
Reset done. There is a service mode. the same modes in order (03, 07, 08) do not work out.

The pump was removed for inspection.
the motor with the board, the fuse is out of order,
the optocoupler was replaced immediately, and the lits in the power supply.

• departure of the master to the house all over Moscow - free of charge *
• fault diagnostics - free of charge (in case of refusal to repair - 600 rubles)
• Warranty for work performed up to 36 months. BO-1
• details by phone: +7 (499) 495-10-97 (24/7)

What can we offer you? -
– Firstly, high-quality repair of dishwashers at an affordable price.
- Secondly, useful tips that will help you avoid problems with the washing machine in the future. The best masters of the city of Moscow work in our company.
– The experience of employees and their attitude towards customers is a symbol of our company.
– We value our customers and do our work with honor and dignity.

V. - What factors determine the final cost of repairs? Is it possible to get an approximate price by phone?
O. – The final cost depends on the price of spare parts. Yes, if you describe the malfunction in as much detail as possible, then the operator will be able to name the approximate cost of repairs with a difference of +/- 200 rubles.

V. – We heard that repairs are made in service centers from one week to a whole month. Is it so?
O. - That was about 10 years ago. Now, in 2012, repair times vary from a few hours to one day. (if spare parts are in stock)

V. Do you provide a guarantee, if so, for how long?
O. – We give an official guarantee of our service center for a period of 6 months to three years.

V. – How is the complete repair procedure carried out? Could you describe all this in more detail?
O. - In 95% - repairs are carried out at customers' homes. That is why the repair time is so short.

Repair PMM Beko DIS 1501, no rotation of the circulation pump
Initially, the complaint is that it does not collect water. In fact - the water in the pan. Eliminate.

Repair PMM WHIRLPOOL WP80 854280038910, No start of the circulation pump
The dishwasher came in for repair with a defect, no circulation. Takes water normally.

Repair PMM Miele G692 SCI Plus-3. Nr:27/64122912, No circulation pump start
Good afternoon colleagues. Received for repair PMM Miele G692 SC Plus-3. Type:HG01.

Repair PMM BOSCH SGS 5662/22, Replacement of the circulation pump
Uv colleagues background is as follows. the circulation pump in this car burned out.

Repair PMM SMEG ST515, s 1033003521, Vibration of the circulation pump
Sink a little less than a year. Connected to hot water. 10-15 minutes after the start.

Despite the fact that imported washing machines have served flawlessly for more than 10-15 years, users quite often turn to service centers to repair Beko washing machines.

In most cases, the problems are mild, so we suggest considering cases where you can easily carry out repairs yourself.

Having entrusted the inspection of the car to an experienced master, there is no doubt that he will quickly and professionally find what the problem is. But due to the high prices for services, many home craftsmen are trying to save money and do their own Beko washing machine repair.

Almost any CMA model can be repaired at home: ELB 57001 M, RKB 58801 MA, LNU 68801, etc.

This approach is fully justified - often repairs cost exorbitant prices, and sometimes the price is such that you can buy a new machine. At the same time, even the most "killed" car can last a few more years after repair.

Do not want to throw away the Veko machine and buy a new one? Try to figure out the problem yourself and fix everything with your own hands.

The device of the Beko washing machine also determines the nature of its breakdowns. Consider the typical malfunctions of washing machines of this brand:

• Water does not heat up to the set temperatures, washing goes in cold water on any program. Or vice versa - the water overheats.
• The tank fills slowly with water or does not fill at all.
• The Beko washing machine does not start because the door does not close tightly enough.
• Water is in the tank at the end of the wash (this may be accompanied by a strong hum).
• The rotation of the drum occurs with a rattle, rumble, clang and other uncharacteristic sounds.
• Not a single washing mode starts - all the lights on the machine blink. Or the program works, the indicator lights up, but the machine does not erase.
• I cannot start the machine with the power button (when the power cord is connected to the mains).
• Models with an electronic display give error codes H1, H2, H3, H4, H5, H6 and H7. The machine is not working.

Important! There may be other signs of failure. We have reviewed the most common Beko SM users in Russia.

As mentioned earlier, all malfunctions are accompanied by certain signs - from minor malfunctions to complete failure. The problem of a home master always lies in one thing - how to connect the existing signs of a breakdown with its causes. Here you just need the knowledge and advice of narrow specialists.

Next, we briefly summarize the main breakdowns.

If you know how to use a Beko washing machine, then you know that the water used after washing is never clear and clean - this is the specificity of washing. So that dirt, threads, hair, etc. do not clog the pump, there is a special drain filter on the way to it, which mainly suffers from blockages.

Your task is to find this filter, which is usually located at the bottom of the washer, under a small hatch or behind a panel. How to proceed next:

1. Before removing the filter, do not forget to substitute a basin or lay a rag under the machine, because the remnants of waste water will surely pour out of the hole.

In a number of Beko models, along with the filter, an emergency drain hose is also included - with its help it is much more convenient to drain water into any container.

1. To remove the filter, simply turn it to the right.
2. Next, clean the filter by hand and rinse under a faucet.
3. Armed with a screwdriver, you can also clean the pipe at the same time - it is usually also clogged with debris from waste water.
4. Once you have tools at hand, do not rush to put them away - for prevention, clean the filter that is on the water supply (it is located at the place where the hose is attached to the rear panel). Sand and rust from the plumbing slowly collect in this filter and eventually interfere with the normal filling of water into the drum.
   
   
5. After cleaning the inlet filter, do not rush to put it in place - also check the drain pump. Often, Beko washers, during self-diagnosis, find a pump breakdown and signal this using the H5 fault code. But with some breakdowns, the controller may not see minor violations - such as a loose impeller (you can identify it by hearing a hum).
6. To check the pump, start the drain mode and look into the filter plug hole to see how the impeller behaves. If it rotates, then everything is in order, and if not, then you need to clean or even replace the pump.
   

To fix such a problem, you will also need at least a partial disassembly of the Beko washing machine, but more on that below.

First, let's say that in SM one of the most vulnerable nodes is a thermoelectric heater, simply a heating element. The mineral salts present in the water under the influence of hot water crystallize and settle on the heater in the form of scale familiar to everyone - like in a teapot. Plaque does not let heat through, so the heating element does not give it to water and burns out.

If there is no scale, you have soft water, or you use special products, this does not mean that the heater could not burn out. The heating element has its own generation resource, and maybe its time has just come.

If the heating element fails, you will know about it by the errors H2 and H3. To be 100% sure what happened to him, first get to the heater. In some Beko models it is at the back, in others it is in the front.

So, how to disassemble the Beko washing machine, find the heating element, check and replace it, read on:

• If the heating element is in front, then in order to remove the front panel, you need to remove the cuff of the hatch. To remove it, proceed carefully - if something goes wrong, then your activity is fraught with damage to the cuff and leaks.
  
• You will not see the entire heating element - only its shank with two contacts and wires going to them.
• Disconnect all wires.
• Take a tester and measure the resistance. Usually, 25-30 ohm marks will be normal. If the indicators are different (for example, infinity), then there is a breakdown.
  
• Remove the heating element by unscrewing the nut from the bolt that holds it under the drum.
• Clean the installation site from debris and plaque.
• Install the new heating element in reverse order, connecting all the wiring in place.

This video shows in strict sequence how to remove, check and replace the heater:

If the heating element turned out to be inactive, then you need to check the temperature sensor (thermistor). You will find it under the top cover. How to get and test the sensor:

1. Remove the top cover by unscrewing the screws.
2. The dismantling of the sensor is carried out with the removal of the cuvette for detergents and the control panel - all this makes it difficult to get to the element. Having reached the sensor, free it from the wires.
3. The resistance measured by the tester in room conditions should be 4.7 kOhm.
4. Heat the sensor in a glass of warm water - after that, the readings should drop. If this does not happen, the sensor needs to be changed.
   
5. Installation of a new sensor is carried out in the same way as dismantling, only proceed in reverse order.

If you have the knowledge and experience of repairing electrical appliances, then you will quickly eliminate breaks in contacts or their oxidation. You only need a diagram of the Beko washing machine - you will find it in the manual or on the manufacturer's website, indicating the model of your SM.

As for electronics, everything is ambiguous here.

Repair or replacement of the electronic controller (control board) requires special knowledge and extensive experience.

Considering that an electronic module can cost as much as a third of your washing machine, it is not profitable to engage in amateur activities. Especially if the board needed minor repairs, which any master can do for little money. If you “sentence” the module, you will have to buy a new one, and an innocent breakdown will end in a difficult and expensive repair.

Remember that it does not matter what characteristics your machine is designed for - they break in exactly the same way. If you got a 5 kg Beko washing machine, the malfunctions will be the same as in a similar 3 kg model. To prevent the Beko automatic washing machine from breaking down, we advise you to use the instruction manual and follow the rules prescribed there.

When turned on, the display works, by pressing the buttons, the modes are switched. It does not fill with water and buzzes as if the engine is jammed inside. The water poured inside from the pallet is drained into the sewer. If you hold down the program selection button or half load before switching on, then “r3” lights up on the display. If you hold down the start or delayed start button before switching on, then “Er 1” lights up on the display. I suspect that the machine is reporting a malfunction, but I do not know how to decipher it. I don’t want to disassemble everything, tell me where to look?

It is forbidden to write answers that do not carry any benefit for the questioner from the series: “take it to the service”, “contact the ASC”, “unprofitable”, etc. Such answers will be considered rating cheating, the answers will be deleted, and the account will be blocked.

If you undertake to help people, answer fully. Explain why, if you recommend, for example, to reflash the phone, then write how to do it. If you write that the repair is unprofitable, explain why.

Many consumers note the reliability of washing machines that were manufactured 10-15 years ago. But even for such machines, the working resource is not infinite and they finally break down. Repair of washing machines Beko, Indesit, Ariston and other brands is not always justified and you have to buy a new machine.

But in some cases, the problem is not so serious, it can be eliminated with your own hands, thereby extending the age of your beloved “home assistant”.That is why we will talk in this article about typical breakdowns and repairs of Beko washing machines.

Experienced washing machine repair specialists are able, by looking at the operation of the equipment, to determine which unit or element is broken or is about to break and needs to be repaired. It would seem that if there are problems with your machine, call such a specialist from the service center, and he will deal with the cause of the breakdown, and if you're lucky, he will fix it on the spot. Everything is fast, easy and without unnecessary headaches, and most importantly, in some cases such an act is fully justified.

But there is one “but” here, calling a master and his repair services cost money, and a lot of it. It often happens that repair services cost more than the real cost of a Beko automatic washing machine and machines of other brands. It's a shame to give that kind of money for old junk, especially if there is no way to quickly buy a new machine. There is only one way out - to try to fix the breakdown with your own hands. But for this you need to correctly identify the breakdown, which will be helped by the “symptoms” of malfunctions of Beko washing machines.

• The water is not heated, and washing takes place in cold water or, on the contrary, the water is heated very strongly, not in accordance with the temperature set by the user.
• Water is poured into the tank for a very long time or not poured at all.
• The hatch does not close completely and because of this, the wash does not start.
• After the wash is completed, the water does not drain and this is accompanied (or not accompanied) by a strong hum.
• The drum of the Beko washing machine rotates with a strong rattle, clang and other extraneous sounds.
• It is not possible to start any washing program, because the machine, after turning on, blinks all the lights or the program is set, but does not start.
• The machine does not turn on with the button, although the power cord is plugged into the outlet.
• The Beko machine, which has a display, gives an error code and "refuses" to work.

Note! There may be more symptoms of malfunctions, but most often users have to deal with the above.

As we noted above, malfunctions of washing machines give themselves out as external “symptoms” of malfunctioning or failure altogether. But the problem is, how can these symptoms be associated with a specific breakdown? This is where some knowledge and advice from experts will be required, let's briefly outline them.

If you see that washing is taking place in cold water, even though the water should be warm or hot according to the program - this may indicate a breakdown of the heating element or control board. The same conclusions can be drawn if the water is constantly overheating, that is, the user sets the temperature to 30 0 C, and the system brings it almost to a boil. In case of water overheating, the probability of a malfunction of the control board is even greater than a malfunction of the heating element, but both elements must be checked.

When you start the washing program, the machine should start pouring water into the tub. This happens with varying intensity, depending on the program selected by the user. To see the process of pouring water, just look through the hatch window. But if you see that 20-30 or even 40 minutes pass, the drum slowly rotates, but the water does not enter the tank, or time passes and the machine freezes, stopping executing the program and issuing a certain error code. There may be four reasons for this:

1. there is no water in the water supply system - this fact is easy to check by opening any tap;
2. the water filter located at the base of the inlet hose (if any) is clogged, respectively, water does not enter the machine;
3. the filling valve is broken;
4. Faulty element of the control unit.

The Beko automatic washing machine is designed so that it will not start the washing program until the hatch is completely closed and the blocking device sensor sends a corresponding signal to the control board. If the hatch does not close or seems to be closed, but the washing program still does not activate, then either the locking device has broken and does not hold the hatch, because of this, the sensor cannot work, or the sensor itself has broken.

For your information! If there is a problem with the hatch blocking device, try to gently press this hatch with your knee and turn on the washing program again, it is possible that the fixing hook simply does not fully enter the mating part and fixation does not occur.

After the washing program is completed, the washing machine must drain the soapy water and pour in fresh rinse. This process is accompanied by the hum of the drain pump. Draining of water is carried out quite quickly, after which the machine begins to draw clean water. If the machine, after a rather long time, cannot drain the water, and then freezes, or it tries to drain the water, the pump buzzes, but the drain does not occur, the problem lies:

• in the pump;
• in the control board;
• clogged drain hose or drain.

If the machine is very noisy, the drum rotates with a terrible clang, rattle and knock, it is very possible that the bearings have broken or just a foreign metal object got into the tank, got stuck between its wall and the wall of the drum and wedged. Such a breakdown requires the immediate shutdown of the machine and the adoption of measures to eliminate the problem.

Also, the machine may not turn on at all or, after turning on, start blinking all the lights, and this is repeated from time to time and turning the machine on / off again does nothing. In this case it may:

1. break the on / off button of the washing machine;
2. break the control unit;
3. break the network wire.

It is best if the Beko washing machine with a display does not just freeze, but gives a system error with a certain code. The manufacturer has provided error codes so that the user can identify the breakdown without contacting a specialist. The description and interpretation of these codes are presented in the table below.

In theory, all Beko automatic washing machines are repairable, no matter how many kg their drums are loaded, how old they are or whether their control panels have displays. But in practice, problems often arise, or it is impossible to do the repair yourself, or it is not advisable due to the high cost, or there are no suitable spare parts available. In any case, if you find a breakdown and undertake an independent repair, you need to take these factors into account so as not to end up in the loser, losing time and money.

Important! For example, replacing the bearings of a washing machine sometimes takes hours from a specialist, calculate how long you can handle, if at all you can do the replacement correctly.

Experts strongly recommend taking on only the simplest repairs, which, for example, are associated with either the replacement of units or the elimination of blockages. It is better to leave the rest to the masters, because there is a risk of spoiling something, and this again will result in extra costs. So, which of the typical breakdowns can be fixed with your own hands?

• Clean the drain filter, removing debris and dirt from there that interfere with the normal operation of the machine.
• Replace the drain pump, but only if you are convinced that the old one is out of order.
• Check and replace intake valve. To do this, you will also have to make sure that the problem is not in the control board.
• Replace the heating element.

Ten breaks down on Beko washing machines quite often, especially for some reason on domestic models with a load of 6 kg. It is not difficult to replace it yourself, the main thing is to perform the following actions in accordance with the recommendations of specialists.

1. The heater in Veko washing machines is located at the back of the tank, which means the first thing we do is remove the back wall by unscrewing a few bolts.
2. Having removed the wall, we see a large round wheel - this is a pulley, a little lower from the tank two large contacts stick out - this is a heating element.
3. We take a suitable key and unscrew the fastener holding the heater, disconnect the wires from the contacts.
4. Gently, but with effort, pull the heating element out of the groove.
5. We purchase the same heating element and continue to work.
6. Carefully insert the new heating element into the groove and fasten it.
7. We connect the wires to the contacts, put the back wall of the machine in place and check the operation of the new element.

Summing up, we note that Beko washing machines, in general, are fairly reliable, however, they, like other appliances, break down. Inviting a specialist is an expensive business, so this should be done only if the breakdown is complex, in all the rest you can try to save money by doing the repair yourself.