DIY car repair boxes

In detail: boxes for auto repair with your own hands from a real master for the site my.housecope.com.

Having bought a plot in a good place, the first step is to think about what to quickly, inexpensively and most importantly build a car service firmly. The construction market offers many materials, including ready-made buildings for such buildings. In this article, we will give a detailed overview of what and how to build a car service.

There are traditional materials (brick, foam blocks, cinder blocks, etc.) and more modern materials (sandwich panels, glued panels) or just a metal frame sheathed with corrugated board, depending on what the construction budget is.

Looking ahead, it should be noted that sandwich panels have been used in construction for more than 10 years, from which any pre-fabricated building can be erected in a short time, starting from a warehouse and ending with an office building. Due to its thermophysical characteristics, the main application of the panel is found in the construction of premises for car services and workshops, since with the help of these structures it is possible to quickly and economically create comfortable working conditions for personnel at any time of the year.

The basic rule is that the lighter the walls, the cheaper the foundation will come out. For bulky stone structures, it will be necessary to fill in a massive and solid foundation, the costs of which can reach a third of the total budget for construction.

For light walls, a tape-type base will be enough. A foundation on screw piles and columnar foundations are also possible, depending on the climatic zone. We only note that the pile-screw structures of foundation foundations are the most economical and quickly installed.

Video (click to play).

Capital buildings erected of brick, subject to good insulation, are an excellent option for any construction. The disadvantage is that construction will be difficult, time consuming and very expensive. In addition, a frequent limitation is that capital construction bans have been imposed on many sites.

Prefabricated metal structures in ancient times were often used as car services, workshops and warehouses. The winter temperature in such a room did not differ much from the outside temperature (even with the presence of a stove or electric heater). In summer, the iron wall was heated to very high temperatures, it was almost impossible to be in such a room.

Wall and roof sandwich panels are a "pie" that consists of a cassette steel profile, insulation and outer coating (siding, profiled sheet, porcelain stoneware, etc.).

Roofing PCB Wall PCB

They are devoid of many of the disadvantages of metal structures and have many advantages over capital structures. These are low cost, tightness, maintainability, etc.

A non-combustible material is used as a heater - mineral wool. Unlike other common heaters: polyurethane foam and polystyrene foam, which not only melt with the release of acrid smoke, but can also burn on their own, mineral wool does not burn at all.

In addition, it is rather difficult to mount the foam plastic so as to avoid the appearance of cold bridges at the joints. Due to the elasticity and density of mineral wool, its joints are so small that you don't have to worry about cold bridges.

Styrofoam and mineral wool are almost identical in their ability to resist heat loss. In addition, mineral wool has always been considered a more environmentally friendly material than foam.

Sandwich panels are produced in various lengths, widths (100 and 150 mm) and with additional insulation for harsh climatic conditions (Siberia).Prefabricated sandwich panels do not include wet bonding processes and are literally assembled from elements and work according to the hinged ventilated facade technology.

The main advantage of sandwich panels is their low cost. In case of uselessness, the building made of sandwich panels can be disassembled and reassembled in a new place.

It should be noted the low weight of the panels (in contrast to the glued ones) and the absence of the need for heavy equipment for the installation of the structure. The installation of a car service is optimal with a team of 5 people, with an installation speed of up to 70 sq. meters per shift. At the same time, the prefabricated panel roof does not require any maintenance.

Large manufacturers of sandwich panels often have serial production of ready-made prefabricated car service kits on a turnkey basis. The design and configuration already provide for dimensions, repair zones, openings, gates, etc. The basis for the car service is a steel and durable frame. Serial projects are developed with the aim of minimizing costs (price about 12 thousand rubles / sq. M.) And increasing the consumer properties of structures. And often a ready-made foundation on piles is supplied with the kit.

To build a car service, you will have to make a lot of effort and money. However, if you choose ready-made set of car service from sandwich panelsthat this laborious process can be greatly facilitated and accelerated, not to mention the savings in construction.

In addition to a car service, such boxes are ideal for organizing a workshop for the production of furniture, market stores, wholesale depots, product warehouses and just garages.

More articles that may be useful:

Self-service car service
Garage for an hour

I can repair myself.
Newbies are taught here. Is free!
7168 people have chosen our garage for an hour.

In the Sammaster.club ® workshop, everyone can independently service their favorite car, bike, scooter, bicycle or even household appliances with their own hands, with high quality and affordable.

It's warm, cozy, clean and interesting here.

Garage for an hour Sammaster.Club ®

3D tour of the workshop
(2015)

Check with our employee the availability and cost of the necessary spare parts. There are always oils and auto chemicals.

We will select spare parts in advance and deliver them to the beginning of the repair.

It is good to have a change of comfortable clothes and shoes. Disposable overalls can be purchased at the workshop. Wash the car before visiting the workshop (actual in winter and off-season). Sink nearby, 1st floor. Look at the photo or video reports on such works on the Internet - this will give a primary idea of the task. We will help you in the rest. Make a list of planned work - consistency helps to use time efficiently.

Come to the workshop 5-10 minutes before the recording time.

We get acquainted, to start work, we draw up the documents - it's quick. The administrator instructs on the rules of conduct in the workshop and the use of the tool.

Start work. Pause for tea, coffee.
Ask questions to the administrator - the more there are,
the cheaper the repair.

At the end of the work, wipe the tool, put it in place. Produce cleaning up the post“, Or pay for this service.

If you do not know where to get a conditionally free flyover or pit in the north, south, west or east of St. Petersburg

Come to us because the lift is only 300 rubles per hour, you will definitely be helped and prompted

If you have not found the rent of a rem boxing workshop in the Admiralteisky Vasileostrovsky Kalininsky Kolpinsky Krasnogvardeisky Krasnoselsky.

If you did not find rem box rental, repair zone for an hour St. Petersburg or self-service car service v Admiralty Vasileostrovsky Kalininsky Kolpinsky Krasnogvardeisky Krasnoselsky Kronstadt Resort Moscow Nevsky Petrogradsky Petrodvortsov Primorsky Pushkin Central Frunzensky area of St. Petersburg

then come to us at Kirovsky or Vyborgsky district of the city of St. Petersburg in a self-service car

We are waiting for you and wish your cars never break down!

Each site contains its own information on each car service

just click on the red button with the name of the location on the main page

Friends, we hasten to please you.
We have opened the second self-service car service “Sam-Avtomaster”.
It is located on Suzdal Avenue 500 meters from the "Grand Canyon". More extensive photo gallery of press tool, etc. can be viewed in our album.
Address for navigator st. Simonov 15.
Work schedule around the clock.
RECORDING PHONE 8 (812) 965-51-45.
WE START WORK ON SATURDAY (01/13/2018)
CALL AT ANY TIME, WE ARE WAITING FOR YOU)))

Gloves as a gift for each visitor!

Where in St. Petersburg you can take a car to the lift for free?

Only here!

Fix your own car. Our community at #Samavtomaster is for those who like to do their own car repair and maintenance on their own.

If you are not bad at understanding cars and know how to fix your car?

Do not trust the service station workers and think that you can do car repairs on your own?

One hundred self-service Sam-Avtomaster then for you!

This is a new type of service station, where you are provided with our professional equipment for self-repair of a car, perhaps even diagnostics of a car.

We can freely work in our self-service car service, all the tools are available to you free of charge.

You only need to pay the rent of the lift at the car service by the hour

Sometimes it happens that you want to look under the car and see that everything is in order there, and you can come to our car service, and for just 300 rubles, calmly examine the entire bottom of the car, even with a microscope, and you can also consult with our administrator.

Warm box and lift for an hour PIT-STOP around the clock!

Why spend a million or millions to build and equip a bodywork box when you can build and equip one yourself?

Is it possible to illuminate the garage with LED strips?Nikolay, LED strips are suitable only for use as a backlight, for example, in a car interior or lighting a separate corner of a garage. They will by no means give you the lighting you need. It is better to use daylight lamps, and if you paint a car, the more powerful the better. The installation of the light must be carried out so that the light falls from the top to the roof, hood and trunk lid, to the sides of the car: doors and fenders, also from the front and rear of the car - to illuminate the bumpers. In addition, there are tons of floodlights on the market that have the advantage of being mobile. If you don't have enough light in a certain corner, you additionally turn on and install the spotlight as convenient for you.A garage is not only a parking space. It is also a workshop, a place of rest, and a club of interests. Therefore, the arrangement of the garage should be convenient and thoughtful. On a small area, you need to place a lot of things, and it should be convenient to use them. Homemade products for the garage will help with this. What people do not do with their own hands. From an elementary shelf to a complex device. All this can be made by yourself. But you need to know how. Several ideas for modernizing the garage and a plan for their implementation in the article.Arranging a garage is a lengthy process. You won't be able to do everything right away, you have to constantly modernize something, change, tinker with something new. In this case, they mainly use homemade products for the garage. It requires less money and is also a pleasure - making the necessary thing out of the garbage is worth a lot.Even in a small area, you can fit everythingEvery car owner is faced with the problem of storing off-season "shoes" for the car. Where to stick the tires is a sore point. In general, the way tires are stored depends on whether they are mounted on disks or not.So tires with disks can be suspended or stored lying down - in the form of a stack, stacking them one on top of the other. To hang the tires, you can use luggage belts, chains, a metal cable with a diameter of 4 mm or more in a polyethylene sheath. Attach belts to the ceiling, wall, to the top beam.Another affordable way is to drive pins or hooks with a small bend radius into the wall. The distance between the hooks is slightly more than the diameter of the tires. The length of the pins should be such that they do not stick out beyond the limits of the tire. You can stuff them almost under the ceiling so that the wheels fit.Tires without discs can only be stored "standing". Special shelves are made for them. They are usually welded from a profiled pipe. 20 * 20mm, maximum, 30 * 30mm. You can also use a corner. It is inconvenient to cook a round pipe, but cross-members can be made from it - the tires fit and hold in this case better.The shelf width is 4 times the tire width, plus a 10-15 cm margin for some freedom. The height of the rear wall is slightly higher than the outer diameter of the wheel. The design is simple = from the side it resembles a right-angled triangle. Having an inverter welding machine, it will not be difficult to weld such a shelf.These shelves are usually hung on the wall. But the place must be chosen so that no light falls on the rubber - it deteriorates from this. Not the most difficult homemade garage items, but very useful.Probably the largest number of homemade garage items is associated with the equipment of the workplace and tool storage systems. Moreover, shelves and shelves in the garage are not the only way to solve this problem. First of all, you need to decide where the workplace will be located. There are three options: The entire width of the far wall. If the garage is long enough and it is possible to "steal" about 1.5 meters. Dignity - everything is located compactly, close at hand, does not interfere with walking along the car. The disadvantage of this solution is that you have to carry the tools far away if the work is carried out on the street. A table or workbench for a garage is made of boards, sheathed with plywood. Inexpensive, quite reliable. If you have a welding machine and verification skills, you can weld a frame from a corner or profiled pipe. Sheathing again is better with moisture-resistant plywood. The result is a smooth, abrasion-resistant surface. You can, of course, use laminated chipboard, but the laminate is quickly damaged.U-shaped workbench for the garageSo that the place "does not walk", you can install shelves or drawers under the tabletop. Drawers are more convenient, but making them is still a hassle. It is quite possible to make shelves and put boxes knocked down from plywood on them. Plastic crates and baskets are also suitable. But the walls must be thick.Drawers can be placed on the shelvesBy the way, there is a useful idea - to make a rack for storing tools from used cans. Find ones with a handle on top. Then everything is simple - one of the sidewalls is cut out and in the future this canister is used as a box.Useful and simple homemade garage itemsIt is not necessary to make a whole rack - after all, it is difficult to remember where, what is. But according to the same principle, you can make drawers for shelves. On the ends, by the way, you can stick inscriptions or pictures (with pictures, recognition is faster). Such homemade products for the garage bring satisfaction - making a useful thing out of garbage is a pleasant feeling.The most difficult task is organizing storage of the tool in the garage. It is necessary to make sure that everything is in order, but, at the same time, is at hand and in plain sight. Moreover, closed boxes are suitable only for very organized people who always put the thing they have taken in their place. Otherwise, you will constantly rummage through the boxes, forgetting where that lies. There are several ideas for convenient storage of small items and tools. These are very simple homemade products for the garage.The usual metal mesh will help to quickly solve the problem. Reinforcing mesh made of 2 mm wire, 10 cm cage is suitable.Attach it to the wall, bite off some of the twigs, bend them, make hooks, crossbars, etc. You can buy special hooks that are attached to the net (available in stores that sell commercial equipment), ordinary double-sided hooks that can be bought or made from wire are also suitable.Wall mesh - a way to quickly organize tool storageIt is convenient to store screwdrivers on a special shelf. Take a board, plywood, 10-15 mm thick. The board must be well sanded so that there are no splinters. Then, in the plane, drill holes of different diameters in one or two rows. If the board is wide enough, you can make larger holes for chisels or even hammer handles. Clean all the chips again. Now we need to come up with a wall mount. You can use a regular bracket. Screwdrivers, chisels, and other similar material are inserted into the holes. Convenient, fast, everything is in sight.Idea for storing screwdrivers in a garageThere are also useful homemade garage items that allow you to organize the storage of hand tools. Pliers, pliers, wire cutters, etc. to place conveniently is problematic. It can be hung on a net; it is convenient to take off, but not to hang up. But there is a simple solution - to attach a narrow board and put the tool on it. To make it "sit down" comfortably, grind off the board from one side. In cut, it should look like an isosceles triangle.Storing hand tools in the garageAnother simple idea for storing a cordless tool, chargers and spare batteries for them. Make a shelf as in the photo above. In the lower part, cuts of different formats are made, and the upper ones are used as ordinary shelves. The idea is that everything is in one place, quick to get / set in place. These garage homemade products will make your workspace comfortable. It will be easy to maintain order.

The correct organization of storage of tools and spare parts will make the garage more functional.

The garage is intended not only for storage, but also for car maintenance. For this reason, this room should be spacious, clean, comfortable and well equipped.

An alternative to stationary cabinets can be a mobile tool rack

To achieve all this, it is enough to take into account the basic requirements for the organization of space:

The presence of shelves for tires and storage of tools significantly saves free space and allows you to optimize space.
The quality of lighting is of great importance, since not only productivity depends on it, but also the quality of minor repairs.
The construction of a garage workbench, machine tools, a viewing hole and other fixtures expands the range of possibilities for a car owner in relation to vehicle repair and maintenance.

Useful advice! All these elements should not occupy more than 10-20% of the garage area.

Optimal organization of the storage system in the garage: 1 - open brackets and hooks for frequently used tools, 2 - a rack for small tools, 3 - shelves for spare parts and tires, 4 - a rack for large tools, 5 - cabinets for various things, 6 - workbench with additional shelves

About 80% of the shelves in the garage are self-constructed for storing garage accessories, namely:

tools and accessories;
component parts for the car;
accessories.

Often, in the photo of shelves in the garage with your own hands, you find their combination with a rack, which can also be made independently. More often than not, the rack is considered as the main place for storing tools. After installing it, the remaining space is filled with comfortable and spacious shelves.

Be sure to provide a place to store your work clothes. It is not necessary to occupy a large area, you can get by with one shelf or even a crochet (depending on your needs).

On an open stand with brackets, you can place frequently used small tools

A garage is a place where hazardous and flammable substances are stored. These include oil, gasoline, solvents, paints, polishes. For them, it is necessary to provide a separate cabinet, hang a fire extinguisher and install a tank with sand.

To protect against contamination during storage of wheels mounted on tire brackets, it is worth purchasing large bags or specialized covers to prevent dust from entering.

The most bulky spare parts of a vehicle include sets of rubber, which can be winter or summer. When a winter version is used, summer tires are usually stored in the garage and vice versa. Therefore, you should arrange shelves for storing tires or brackets.

The bracket design is as follows:

Two triangular frames made on the basis of corners. Jumpers made of any durable metal are installed between these frames.
The triangular parts of the structure are fixed to the wall at a pre-selected location. The wheels should be installed perpendicular to the support structure. In this case, the tires should fall slightly between the jumpers, thus fixing themselves on the shelf due to their own weight.

Folding corner shelves for seasonal tire storage

Useful advice! It is recommended to place shelves for wheels in a garage with your own hands as close to the ceiling as possible at an optimal height. This ensures that car tires do not take up useful space in the garage.

For compact storage of wheels, a whole rack in the form of four wide shelves can be used. It is suitable for placing wheels with disks that can be positioned one above the other in a horizontal position. The structure can be made angular and raised on the wall.

To create such a design, it is recommended to use:

Installing tire brackets is the most efficient way to store your wheels. More space savings can be achieved by hanging the rubber from the ceiling base along the garage wall.This option is possible if the room has a high height and reinforced concrete slabs on the ceiling. They will be used as a base for screwing in dowels.

Wall shelf for tires, made of a profile pipe

To organize a convenient area for storing things, you can independently make a homemade and very spacious rack or shelves. Of course, in stores you can find hundreds of ready-made models, nevertheless, making a shelf in the garage with your own hands is much cheaper than buying a similar product on the market.

The problem is the same for shelving. Taking up the independent manufacture of storage space for tools, you can not only organize a convenient and practical rack, but also harmoniously fit it into the garage space.

Useful advice! The minimum indicator of the loads that the structure must withstand is 150 kg or more. In this case, the maximum limitation of the load on one section is 500 kg.

The presence of shelves and brackets will help to organize the toolkit depending on its purpose.

Rules for the manufacture of wood products:

It is better to use hardwood such as beech, oak, hornbeam.
Before assembly, wood must be treated with antiseptic agents.
Frame parts must be carefully sanded to ensure safe operation of the rack.
For the manufacture of shelves, it is recommended to use chipboard or plywood sheets, OSB. DVL plates with a thickness of at least 4 mm are also suitable.

The thickness of the material is determined by the loads that will subsequently act on the rack.

Shelves are installed in cases where the garage does not allow to put a rack. It is better if there are several structures.

Homemade stand in the garage for storing sports equipment

Scheme for creating shelves for tools:

Plan the placement of shelves, determine their size and carry out the markings.
Prepare the material in the form of boards and fasteners.
Using a puncher, make holes in the wall, install dowels with hooks in them, which will provide enhanced fixation.
Fasten hangers equipped with lugs on the boards. For metal hangers, it is recommended to use self-tapping screws or regular nails.
Fix the finished products using a building level, otherwise the tool may fall from the shelves, which makes operation unsafe.

Useful advice! When making shelves, it is better to give preference to several short structures, since one long product can break under the weight of the tool.

At the final stage, you can make a decorative finish of the products (paint or special film).

Wall-mounted plastic strip for compact storage of small tools

To create a rack with your own hands, you will need boards 9 and 19 cm wide. The size of the structure can be adjusted.

A 9 cm wide element is cut into several pieces 18 cm, 27.5 cm and 30 cm long. The resulting parts will be spacers.
The board, which is 19 cm wide, should be cut into 36 cm long pieces. Shelves will be made from these parts.
On the board, which will become the base of the product, it is necessary to apply markings in those places where the spacers will be. It is recommended to indent each side by 2.5 cm.
The upper spacer is glued, then the upper shelf, which already has a spacer, is nailed to it. The rest of the parts are mounted in the same way. The bottom brace is installed at the end.
The structure should be turned over and the spacers should be tightened with screws along with the base of the product.
The surface is carefully cleaned with sandpaper. After that, the product must be covered with two layers of oily varnish or another type of finish.
The structure is fixed to the wall with anchor screws. Fixation should be done both under the upper and lower shelves.

Spacious wardrobe rack with hinged doors

Useful advice! To strengthen the product, you should install timber bars between the sections. They will allow you to evenly distribute the loads across the rack.

In order for the operation of the garage to be comfortable, the lighting, ventilation and heating system should be properly organized in the room. Since cars are closely associated with the use of toxic and harmful substances, the problem of ventilation in a confined space is especially acute. For a garage, air vents are suitable for brickwork. They are equipped with grilles.

Factors affecting the level of lighting:

garage area, its height;
the number and nature of the placement of working areas (dimensions of a workbench for a garage, inspection pit, number of machines);
type of decoration on the walls, its colors;
indicator of the specific power of the network per 1 m²;
type of lamps for the garage.

Armstrong recessed ceiling luminaires

Various types of heating can be used to maintain the optimum temperature:

gas;
based on used oil;
air;
electric (infrared heater for the garage);
oven;
water;
solid fuel.

There are many alternative ways to organize your own heating system.

The technical characteristics of halogen lamps are in many ways similar to incandescent lamps, but their bulb is filled with bromine vapor, so the products emit more light. The advantages of such lamps include a long service life - 4 thousand hours.

Competent organization of storage and lighting systems in the garage

Useful advice! Products must be placed in shades. It is also worth thinking about stabilization, aimed at protecting against electrical surges. It is not recommended to touch such lamps with your hands (the shelf life is reduced).

Fluorescent lamps are filled with inert gases inside. From the inside, the flasks are covered with a specialized compound that emits ultraviolet light under the influence of an arc-type discharge. Recommended models are IP-65 rated products that are protected from moisture and dust particles.

Installing LED lighting in your garage comes with the highest cost. Nevertheless, they pay off in 50 thousand working hours. In terms of efficiency, LEDs are 50% more profitable than fluorescent lamps. At the same time, they do not contain harmful components, and the light does not have an aggressive effect on the eyes, therefore, it is not necessary to purchase plafonds.

To calculate the power of conventional lamps, you can use the formula:

Garage lighting should be bright and powerful enough

P is the total required power, W / m².
W is the power of one lamp, W.
N is the number of lamps (luminaires), pcs.
S is the area of the room, m².

For halogen and LED luminaires, the optimal indicator is 16-20 W / m². This value is suitable for rooms where the ceiling height is no more than 2.5 m. In garages with 3-meter ceilings, this figure should be multiplied by 1.5.

Video (click to play).

The calculation is influenced by the interior decoration of the walls of the room. In dark garages, the lighting should be brighter.