Bosch axt rapid 2000 DIY repair

In detail: bosch axt rapid 2000 do-it-yourself repair from a real master for the site my.housecope.com.

Content

1 Spare parts for garden shredder Bosch AXT RAPID 2000 detail 1 (3600H53501). Spare parts catalog and detailing.
2 Review: Bosch Rapid 2000 garden shredder - High-speed, lightweight and mobile, designed for heavy loads.

Before running the tool, make sure
that the hopper is empty.

Keep your face and body safe
distance to the feed funnel.

Keep your hands out of the way
or other parts of your body or clothing in
feed funnel or outlet pipe,
as well as approaching rotating parts.
Turn off the tool before hanging
or removing the collection bag.

Always keep your balance and
good stability of your body. Not
lean too far forward.

Do not stand while filling the funnel with material.
above the level of the instrument feet.

When using the tool, keep
distance to the release zone.

Be very careful to ensure that
loading material into the tool did not fall
no metal parts, stones, glass,
tin cans or other foreign
items.

If the knife finds a foreign object, or
the instrument will vibrate
unusual noise, it should be immediately
turn off to stop the knife. Pull out the plug
network from the socket and carry out
following:

– replace or repair all

– check the fastening of the parts and

Do not attempt to repair yourself
power tool, if you do not have
relevant qualifications.

Make sure the recycled
material has not accumulated in the ejection pipe,
as this leads to a delay in passage
material and to the return in the loading funnel.

Video (click to play).

If the instrument becomes clogged, turn it off and
let the knives stop. Before cleaning
internal cavity of the power tool
unplug the mains plug from the socket.

Leave all protective devices and screens in
assembled condition and check the correctness
their functions.

Don't try to change the number setting
engine speed. When
problems contact the service department
Bosch.

To prevent the engine from burning out and causing any
or other damage to it, keep
ventilation slots clean and remove
accumulations of contaminants.

Do not transport the instrument with the
engine.

Do not leave the instrument switched on
state unattended, previously it
switch off and unplug the mains plug from
socket outlet.

Do not tilt the tool while
condition.

Maintenance and storage

– Before carrying out a service

maintenance, revision, before staging
storage or change of accessories
the tool must be turned off, plug
mains is unplugged from the socket and
cool the tool. Before every revision
or setup and other work
make sure that all moving parts
are at rest.

– Maintain the tool well and

– For your own safety

replace worn or damaged
parts. Make sure all spare parts
tested and approved by Bosch.

– Technical data of the used cable -

extension cord must be at least
the same as the power cord
tool.

– Check lines regularly

power supply and extension cable
damage or signs of aging.
Do not operate an instrument with a damaged
cable.

– Remember that when setting the knife with the

cover, the engine is switched off and cannot
be turned on, but the knife still rotates,
if the engine is driven manually.

– Do not attempt to disable the protective

F 016 L70

The motor gave a wedge.Probably from overheating. A new one costs about 4 tr. I don’t want to take it for repairs, they say it’s necessary to carry it in the collection, but it’s lazy to haul such a boar 150 km and back.

Question. Should I dig, sort out or buy a new motor? The question is not idle, because. this machine withstood significantly less than other tools, including garden tools. Those. there are doubts about the reliability and foolproofness of this model

All this is strange.

This one itself is already 3 years old, after the spring “trimming-uprooting” for the first time I removed the knife for sharpening (it's time). . well, the air intake (there is a foam rubber filter) must be cleaned of wood dust regularly.
Maybe the engine was overloaded due to blunt knives, but it seems that the thermal protection should have worked. On my Chinese trimmer, SunGarden regularly works, I didn’t even think that it was there, but it works. infection

.
And the motor can be removed from the bed, I think you can pick up an analogue bypassing the service. . although for 5000 in Castorama they sell a MAG chopper with a box.

Spare parts for garden shredder Bosch AXT RAPID 2000 detail 1 (3600H53501). Spare parts catalog and detailing.

Quality spare parts. Mandatory delivery. Reliability.

We do not sell counterfeit spare parts. The advantage of original spare parts is due to the fact that they are manufactured in the same factories as the spare parts that are installed during production. We give a 100% guarantee that we will refund the money if the part is no longer available or discontinued.

Review: Bosch Rapid 2000 garden shredder - High-speed, lightweight and mobile, designed for heavy loads.

Good day!
Tree pruning and gardening season is in full swing!
My first assistant in this matter is the Bosch Axt Rapid 2000 garden shredder.

And my today's review will be on it!

It is good because it helps to utilize not only cut branches from trees and shrubs, but also collected tops from cucumbers, tomatoes, and just grass from the garden.
I will describe its main characteristics:
Power - 2 kW
Voltage - 220V
Housing - plastic
Weight - 11.5 kg
Engine type - electric
Power supply of the device - from the network
Noise level - 105dB
Productivity - 80 kg / h
Chopping cutting blade system
Max. branch diameter - 35mm.
Cutting speed - 3.6 rpm.

The chopper is equipped with two plastic wheels

for stability, a comfortable leg, the weight is quite acceptable, so you don’t need to make a lot of effort to roll it out.
This mobile shredder is equipped with a high-speed motor and laser-cut hardened steel blades.

Since the chopper copes well not only with round branches, but also with grass, it has a quite wide funnel and a convenient plastic pusher.

It is better not to work with gloves, as they can be pulled into the funnel and it’s good if you don’t have your hand. It is better not to neglect these rules!

We start work. The chopper itself has only a built-in fork

stretch the extension cord and connect.

The extension itself can be fixed on a hook on the side of the chopper body.

On button – off very bright, made in the same color scheme as the pusher,
located on the left side under the handle.

Branches must be cut before crushing, so that there are no strong branches.
For example, in this thread

we cut off all the side knots and get just such a bunch

There is no need to cut along the length, if only it is very thick, then yes - we cut it.
Long branches are even more convenient to push into the crusher. In general, my unit itself draws in the branches, but they still need to be directed and pushed a little. Be careful, vibration is transmitted from the machine to the branches, and it can whip very painfully if the branch is long and flexible. But experience with this technique is gained quickly, and soon you yourself decide how to stand up, which side to stand on, how close, where to push.

Here after such a bunch of freshly cut twigs

it turned out to be such a wonderful mulch.

My assistant will cope with such a branch

Sawdust is obtained from such a branch beautiful

Grapes or roses, the grinder clicks like seeds.
There was a bunch of lemon balm that had already dried up, and I ground it.

I also grinded lashes of cucumbers.

If soft and flexible material is taken (cucumbers, tomatoes, grass or thin twigs with green foliage), then you have to push it with a pusher.

I always have it at my fingertips while I'm at work.

It stands beautifully there between the handle and the funnel, and if necessary, I use it. And this need arises quite often. It happens that small branches intertwine with each other, you have to push through, for this you do not need to turn off the chopper.
I had a dry pile of grass

It can also be ground, but it does not turn out to be finely ground.

But nevertheless, I scatter it around the garden, as an organic fertilizer, during the winter everything overripes and rots.

But this is only in the garden (I don’t have a lawn there, I just mow the grass with a lawn mower review on a lawn mower.) I don’t recommend it in the garden, because the seeds are showered from the grass, which will then germinate.
In the summer, under the weight of fruits, a pear branch broke off, and so it was her turn.

It also needs to be prepared by cutting off the branches extending to the sides.

Now we move on to completely dry branches, cut in early spring, which were also waiting for their turn.

They, too, were reshaped.

But here I want to note that fresh branches are more easily crushed than dry ones.
Dry branches are no longer flexible, besides prickly, and this causes a lot of inconvenience during work. Thin branches cling to each other and get confused, clog the exit hole of already crushed material. If you see that sawdust does not come out, then you need to stop the machine, turn it off from the network and disassemble the chopper to clean the exit hole.
Disassembles quickly and easily. We turn the black bolt (which is located immediately under the chopper handle) counterclockwise.

We twist until the upper part of the body begins to move away from the bottom.

We remove the entire front of the case.

And that's how the exit hole can get clogged.

All this is removed, cleaned and collected in the reverse order. We continue to work.

If during operation the crusher stops abruptly with a loud rattle, it means that some curved part of the branch is stuck and again it is necessary to turn it off from the mains, disassemble and eliminate the cause of the stop. This usually happens if you leave stumps while pruning side branches from the central trunk. Actually, that's what happened to me.

I scroll a little - a little knife towards me

Here's a little annoyance.

Small but remote!
The knife was sharpened once last year, as the volume of work is large. We have pruning twice a year (main in autumn and sanitary in spring).
I scattered dry ground branches under bell pepper, as mulch.

And from fresh branches with green leaves on the rose garden.

Last year they cut it in late autumn, there were no more leaves, only branches.
It's mulch from last year.

Past grinding and fresh grinding are of course different from each other.

But by the next season, the leaves will dry out and the color of the mulch will become uniform.

He also has disadvantages - he does not really like thin branches. He crushes them badly.

I drive them around the second round, once again he will break them, but they still become smaller.
And if you grind fresh juicy grass (I did it in the spring), the allocated juice from the plants, mixed with ground grass, turns into a porridge that clogs the exit hole. Have to unscrew and clean often. But these disadvantages are so weightless that you turn a blind eye to them.
And here is the result of the work done:

As you can see, the field of activity of such a wonderful assistant as the Bosch Axt Rapid 2000 garden shredder is very extensive. I don't even know how I managed without it before. How much useful organic material was burned!
I have been using them for 2 years. Why didn't we buy it sooner?
At one time, the purchase cost 9500 rubles.
Who has a garden plot, this is the first necessity!
I recommend - I recommend and I recommend again!

Each owner of a garden plot or house territory makes a lot of efforts to ensure that the territory has an attractive appearance.

Wood shredder Bosch Rapid 2000

In this case, you can not do without chopping branches, grass and garden debris. Bosch Rapid 2000 wood shredder will be a great helper in this.

This model of the garden tool is intended for crushing of branches (the thickness of which reaches 35 mm), fallen leaves, dry grass.

According to the survey, the equipment was included in the TOP 10 best gardening tools in terms of sales. Popularity among users is primarily due to the design feature of the device. If we talk about the main distinguishing characteristics of this model of chopper, we can distinguish the following:

All these characteristics determine the ease of use, practicality and safety of working with the grinder.

Spare parts for Bosch Axt Rapid 2000 can be purchased at specialized stores at an affordable price.

Bosch Axt Rapid 2000 device

The device consists of the following main working elements:

The grinder has the following advantages:

Environmental friendliness. The presence of an electric motor does not imply the release of harmful and toxic waste into the atmosphere, which are formed during the combustion of fuel.
The use of a powerful motor by the company's specialists ensures a high rate of practicality and efficiency of using the device.
Has a speed controller. It makes it possible to switch the speed of rotation of the motor depending on the amount and strength of the mass to be crushed.
Quiet operation.
Small weight and dimensions. These characteristics ensure ease of movement and use of the mechanism. In addition, both men and women can work with the tool.
Accessible principle of operation. There is no need for special training.
The presence of wheels. Provides equipment mobility.
Using the reverse, which is used to clean the cutting element. It greatly simplifies the process of caring for the tool.
The price of the Bosch wood chipper is several orders of magnitude lower than similar tools, the design of which is equipped with a gasoline engine.

If we talk about the shortcomings of this model of the tool, we can only highlight that there is a need for a source of electric current. The principle of operation of the tool is similar to the functioning of a meat grinder.

Principle of operation

The sequence of actions is as follows:

The device is installed in a convenient place for work. In this case, it is necessary to take into account a prerequisite: the presence of a nearby source of electric current.
The mechanism is plugged into the socket, and the start toggle switch is brought into working position.
The mass to be crushed is placed in the feed funnel. If there is a need to move it closer to the cutting knives, you must use a convenient pusher.
As the bag into which the crushed mass is placed is filled, it must be cleaned.
After all the debris and branches are crushed, the device must be disconnected from the mains. Only after that you can start cleaning the funnel and hopper from debris.

The principle of operation and operating rules of the grinder are quite simple and do not require special skills.

Bosch AXT rapid 2000 shredder - on video:

Noticed an error? Select it and click Ctrl+Enterto let us know.

I wanted to write at the beginning, but I decided that the video would be more interesting to watch.
Therefore, I will write at least.

Pros:
This model of a shredder completely copes with the tasks of a garden worker.
Simple design for easy maintenance.
In general, in fact, everything is fine and I am completely satisfied.

Minuses:
This is its cost, I think that its real price is 7-8 thousand, but unfortunately, nothing can be done about it.
Noisy work, but it does not cause big problems.
Well, the last thing is a knife, we could pay a little more attention to this (more on this in the video).
I hope that the replacement knife commercially available is of better quality.
But I still have enough of my own knife.

In general, I am completely satisfied with the purchase, it is up to you to buy or not to buy and I hope this video will help you make a choice.

That's all for now, happy shopping.

Good afternoon everyone! I decided to share my impressions of the purchase, or rather, the operation of the Bosch AXT Rapid 2000 shredder. I bought this device in the fall of 2015, when it was time to cut the trees in the garden. Due to the large number of branches, the option of burning them did not bring much joy - this was painfully troublesome. Having considered all the options for such a technique, after reading the reviews and counting the money, I settled on this model as the most optimal option for me in terms of performance and price, taking into account bonuses.Unfortunately, after the purchase I was not able to take pictures of the packaging, but in this regard, everything here is in the best traditions of the company: a large green cardboard box, inside which the device itself was located, wheels, a shovel for pushing branches, instructions. I had no complaints about the quality of plastic, assembly and packaging.Well, now let's move on to a description of the grinder as such in more detail and on the features of its operation. So photos of Bosch AXT Rapid 2000 after a season of operation.The device is made in two colors: black and green, marking in the form of an inscription on a transparent film is glued to the case. Two red spots stand out - this is the power button and a spatula for pushing through branches and foliage. The device stands on a metal arc-support, to which two large plastic wheels are attached. In combination with a comfortable handle, we get excellent transport characteristics - Bosch really easily and comfortably rides around the site.By governing bodies. There is a large red spring-loaded power button on the back of the device, which has three positions. The first is shutdown, the second is normal operation, and the third is startup. Those. to turn on the device, we move the switch to the second position, nothing happens, then turn it all the way - the engine starts, and under the action of the spring the switch returns to the middle position. What we liked: the developer took care of emergency situations: in the event of a strong “tension”, the automation turns off the engine, while the switch returns to “Off”.The next detail is the socket. More specifically, a fork. To be honest, I have never come across such a design: an electrical apparatus does not have a cord. None. Just a built-in fork. Therefore, in order to happily get to work, you still have to buy an extension cord (if you don’t have one), since there is no hint of this device in the kit. The "mother" of the extension is inserted into the grinder and fixed with a spring clip.

Next to the switch is a large bolt head that fixes the upper plastic casing of the chopper and at the same time is a fuse: without the casing installed and the screw wrapped, the device will not turn on.In the upper part of the casing there is a supply opening, buried with red soft plastic flaps. They prevent accidental flying of chopped parts of the tree. In general, everything is fine with a security device and everything is provided for: automation, marking, red color of important elements. True, I would recommend the use of goggles and gloves: God saves the safe!Under the casing there is a grinding unit, which is a rotating metal disk with a double-sided knife fixed on it.The knife has sharpening on both sides, so if necessary, you can turn it over. To do this, remove the metal casing, fixed on 6 bolts, and unscrew the bolt with a hexagon.I want to say right away that I had to turn the knife over in the very first season, since it could not withstand the load, on the one hand, and on the other, the quality of its sharpening left much to be desired. It seemed to me that the edge of the knife was simply burned out, which is why it quickly became covered with notches. True, I tried to put everything I could into the chopper: dry and damp branches, foliage, grass. And I must say that the most optimal area for its application is damp branches with a small amount of leaves. It is difficult (and dangerous) to work with dead wood, the chopper quickly clogs from leaves and grass and you have to stop work often.After passing through the cutter, the crushed parts fly out of the lower hole, and with sufficient acceleration. Therefore, to maintain cleanliness in the workplace, you either have to lay a film or substitute some kind of container. I adapted the box from the MFP.According to technical specifications. The engine is 2 kW, it works quite quietly (106 dB). Device weight 11.5 kg, assembled in Hungary. The maximum diameter of the branches is 3.5 cm. Now a few words about the impressions of operation. Let me just say that the work is a pleasure. I don’t like poking around in the garden, but with the advent of the chopper I began to pay more attention to the trees 🙂 However, in order for the work not to be interrupted often, additional preparation of the material is required. If the branches have a cross-shaped fork, it is better to immediately chop off the excess with a hatchet, otherwise you will be tormented by pushing them into the chopper. The maximum thickness of the branches is more than 3.5 cm, but it is desirable that the tree is damp, the knife is sharp, and the pressure is not too strong. It is necessary to periodically rake the crushed material from the “exit” of the grinder, otherwise it quickly becomes clogged and you have to unscrew the upper casing and clean the device with handles.What do we have as a result? It depends on the source material, but calling it sawdust or shavings is not entirely accurate. From an even thick raw branch, beautiful round washers are obtained. From thin - from 5 to 10 mm pieces. Leaves can slip through without processing, or be chopped into several pieces. Sometimes the branch splits along. Where and how to apply all this, everyone decides for himself, you can sprinkle the paths, do the filling under the trees and bushes, etc.And finally, some pictures of the 2016 season. As an object, there were three small ash trees growing out of place. Before:A small piece of video for a general idea:

The Bosch AXT 2000 RAPID garden waste shredder is a great helper for putting things in order on the site. Leaves, knots, root residues are easily disposed of, or they can serve as a crushed fertilizer for beds. This model is distinguished by a modern funnel design with a built-in pusher, which significantly increases the speed of work.

Attention! There is a feature of connecting to the network - there is only a rigidly fixed plug on the case, so we recommend purchasing special cord.

The Bosch-Powerdrive brand motor has a powerful torque of up to 12 Nm;
Cutting blades made of extra hardened steel;
Throughput 80 kg/hour;
Additionally, you can purchase a collection bag 50 l for the AXT Rapid Bosch shredder 2.605.411.073.

The bag is not included!

The manufacturer reserves the right to change the characteristics, appearance, packaging of the goods and the place of its production without notifying the dealer.

This information is not a public offer

The manual BOSCH AXT Rapid 2000 contains pages in Russian

Go to the file download page for this manual: Download PDF

Ideal for all types of gardening
material.
Do you want to chop the cut branches without waking up
neighbors? Without separating the grass from the branches of bushes and
trees? Bosch can help you meet this challenge
with your silent chopper
with "Turbine-Cut" system, which is suitable for
processing of any kind of garden material.
With patented quick action funnel
and automatic tightening mechanism
for fast filling and high throughput
capabilities. Removable for easy storage
The funnel fits easily into the grass catcher.

Turbine cut system New system

"Turbine-Cut" guarantees ultra-high
grinding performance as for
soft plant material
for hardwood and work with almost no
locks.

cutting shaft Optimized
cutting shaft system provides
maximum performance
shredding 175 kg/h for branches
up to 40 mm in diameter.

Cutting system of knife shredders
Durable, made with
laser technology knives with high
cutting performance for processing
soft plant matter.

Guaranteed productive grinding.

What Bosch shredders have gained in recent years
such high ratings from their users,
not an accident. Because Bosch offers innovation
in accordance with the wishes of users,
e.g. unique silent shredders
with "Turbine-Cut" system suitable for
shredding any kind of garden material.

Whichever grinder you choose, each
of which are distinguished by amazing power
and speed, and you will have more time
to enjoy the view of your garden.

The right shredder for every garden.

* Engine power: declared engine power - operating mode S6 (40%). It includes a load profile of 40 seconds load and 60 seconds idle for practical use.

Nice garden tool. well grinds twigs from 1 to 3 cm, quickly disassembled for cleaning, light. The AXT RAPID 2000 shredder will help you dispose of thin (up to 3.5 cm) branches, as well as grass. Organic waste obtained in this way can be disposed of or used for composting. Buying this model of garden equipment is the right decision if you need to process a small amount of waste (up to 80 kilograms of branches per hour).

wheels for moving the chopper around the site;
the presence of electrical protection;
convenient funnel and pusher for quick loading of branches;
sharp durable swiss knives.

Video I tested the Bosch AXT RAPID 2000 W garden shredder - a good channel tool In the Country

The garden shredder is used for grinding sticks, branches and other natural debris. The result is an organic fertilizer for the garden. The device can be of different power with power from the mains or a gasoline engine. The system of knives is milling and disk. The BOSCH product range covers the entire range of shredders.

A garden shredder is a device for processing leaves, branches, fruits and other organic waste. Its use by the owners of a garden, a summer cottage or a private house is relevant.

The tool consists of a motor, a system of knives and a funnel, a frame and a control panel.

Garden shredders are equipped with electric or gasoline engines.

Equipment with an electric motor is lighter. His work is not accompanied by the exhaust of harmful gases and a lot of noise. But it is less powerful than gasoline counterparts. And its movement is tied to the network. On average, it is designed to grind litter with a diameter of up to 5 cm. Such devices are well suited for a plot of up to 15 acres.

For a large area with dense vegetation, it is optimal to purchase a gasoline chopper. Their power varies from 3 to 8 kW with a funnel up to 8 cm.Usually they are equipped with strong four-stroke engines. But operation is expensive and requires constant costs for engine oil and fuel.

When choosing a tool, pay attention to the type of its funnel. The most convenient form is considered to be an inclined cone.

A waste pusher is sold with the chopper. Since it is dangerous to push rubbish by hand or improvised materials.

To work with electric models, it is useful to purchase an extension cord. It will allow you to move freely around the perimeter of the site.

BOSCH organic trash shredders are divided into the Rapid 2000 and AXT 25 series. They allow you to keep your garden clean by recycling waste.

Rapid 2000 models are mobile and lightweight, powered by mains. They are equipped with an engine with a power of up to 2 kW, which develops up to 3650 revolutions of cutting knives per minute.

The diameter of the funnel allows you to grind debris up to 3.5 cm in diameter. The waste container is purchased separately from the device.

The cutting mechanism has a drum system. There are knives around the rod. From above the design is closed by a casing for prevention of injuries. The throughput of the device is 80 kg/hour.

The tool weighs 12 kg. It is equipped with two wheels and a handle for easy moving.

The cost of garden shredders BOSCH Rapid 2000 varies from 230 to 330 USD.

BOSCH AXT 25 models have a 2.5 kW motor with a capacity of over 220 kg of waste per hour. The size of the funnel allows you to shred branches with a cut of 4.5 cm. A waste bin is included with the AXT 25 garden equipment.

Their noise level is 90 dB, as opposed to 105 dB for Rapid 2000 devices.

Eight blades are cone-shaped and move in both directions. Rotation to the left or to the right is set by the button on the grinder body. The cutting mechanism is also adjusted depending on the thickness of the processed material.

The system provides high performance. And the branches inserted into the funnel will independently mix down until they are completely utilized.

The device weighing 30 kg is moved using the chassis by the handle.

The price of cars ranges from 415 to 770 USD.

The Rapid 2000 and AXT 25 equipment comes with a two-year BOSCH warranty. And their motors and gearboxes are protected from overloads and power surges.

We have an authorized service, 700,000 spare parts, 90,000 parts, service and repair all leading brands97 % of our clients contact us again!Can't find your model?Our masters have been trained by the manufacturer and are certified to carry out repairs and maintenance of equipment. We use original spare parts!All information on the site is posted in order to provide the buyer with the opportunity to get acquainted with the product before purchasing it, and is not a public offer (Article 437 of the Civil Code of the Russian Federation). Information about goods and services on the site can be updated within a few hours. For the availability and cost of the goods, as well as the current status of the repair, check with the manager by phone 8 (495) 221-07-05 from 10:00 to 18:00.