Bosch axt rapid 2000 DIY repair

Details: bosch axt rapid 2000 DIY repair from a real master for the site my.housecope.com.

Content

1 Spare parts for the garden shredder Bosch AXT RAPID 2000 detailing 1 (3600H53501). Spare parts catalog and detailing.
2 Testimonial: Bosch Rapid 2000 Garden Shredder - High-speed, lightweight and mobile, designed for heavy loads.

Before starting the tool, make sure
that the hopper is empty.

Keep your face and body in a safe
distance to the hopper.

Exclude the possibility of getting your hands
or other parts of your body or clothing in
loading funnel or into the outlet,
as well as approximations to rotating parts.
Switch off the instrument before hanging
or by removing the collection bag.

Always keep your balance and
good stability of your body. Not
bend too far forward.

When filling the funnel with material, do not stand
above the level of the tool feet.

When working with the tool, keep
distance to the ejection zone.

Be very careful to ensure that when
loading material did not get into the tool
no metal parts, stones, glass,
cans or other foreign
items.

If the knife hits a foreign object, or
the instrument will begin to vibrate, emit
unusual noise, then it should be immediately
turn off to stop the knife. Remove the plug
mains from the socket and carry out
following:

- replace or repair everything

- check the fastening of the parts and when

Do not try to repair yourself
power tool if you do not have
appropriate qualifications.

Make sure that recycled
material did not accumulate in the discharge pipe,
as this leads to delayed passage
material and to the return in the loading funnel.

Video (click to play).

If the tool becomes clogged, turn it off and
let the knives stop. Before cleaning
the inner cavity of the power tool
remove the mains plug from the mains socket.

Leave all protective devices and shields in
assembled and check the correctness
their functions.

Don't try to change the setting of the number
engine speed. When there is
problems contact service
Bosch.

So that the engine does not burn out and any
or keep it damaged or damaged
clean the ventilation slots and remove
accumulation of dirt.

Do not transport the instrument with the
engine.

Do not leave the instrument running
unattended condition,
switch off and unplug the mains plug from
socket outlet.

Do not tilt the instrument when it is turned on.
condition.

Maintenance and storage

- Before carrying out the service

maintenance, revision, before staging
storage or changing accessories
the tool must be switched off, the plug
the mains is unplugged from the socket and
cool down the tool. Before each revision
or customization and other works
make sure that all moving parts
are at rest.

- Serve the tool well and

- For your own safety

replace worn or damaged
parts. Make sure all parts are
tested and approved by Bosch.

- Technical data of the used cable -

extension cord must be at least
the same as the power cord
tool.

- Check lines regularly

power supply and extension cable for
damage or signs of aging.
Do not switch on an instrument with a damaged
cable.

- Remember that when adjusting the knife with the

the cover, the engine is turned off and cannot
be turned on, but the knife still rotates,
if the engine is started by hand.

- Do not try to disable the protective

F 016 L70 462.book Seite 2 Dienstag, 30. November 2010 1:53 13

The motor gave a wedge. Probably from overheating. A new one costs about 4 tr. I don’t want to take it for repairs, they say it’s necessary to carry it assembled, but it’s lazy to pull such a boar for 150 km and back.

Question. Is it worth digging, sorting out, or buying a new motor? This is not an idle question, since this machine held up significantly less than other tools, including gardening ones. Those. there are doubts about the reliability and foolishness of this model

All this is strange.

I have already had this one for about 3 years, after the spring "pruning-stubbing" I took off a knife for sharpening for the first time (it's time). ... Well, the air intake (there is a foam filter) must be cleaned regularly from wood dust.
Maybe the dvigan was overloaded due to blunt knives, but it seems that the thermal protection should have worked. On my Chinese trimmer, SunGarden works regularly, I didn't even think that it was there, but it works. infection

.
And the motor can be removed from the bed, I think you can pick up an analogue bypassing the service. ... although for 5000 in Kastoram, a MAG shredder with a box is sold.

Spare parts for the garden shredder Bosch AXT RAPID 2000 detailing 1 (3600H53501). Spare parts catalog and detailing.

Quality spare parts. Obligatory delivery. Reliability.

We do not sell fake spare parts. The advantage of original spare parts is due to the fact that they are manufactured at the same factories as the spare parts that are supplied during production. We give a 100% guarantee that we will refund the money if the spare part is no longer supplied or discontinued.

Testimonial: Bosch Rapid 2000 Garden Shredder - High-speed, lightweight and mobile, designed for heavy loads.

Good day!
The season is in full swing for pruning and cleaning your backyards!
My first assistant in this matter is the Bosch Axt Rapid 2000 garden shredder.

And my today's review will be on him!

It is good in that it helps to dispose of not only cut branches from trees and shrubs, but also collected tops from cucumbers, tomatoes, and just grass from the garden.
I will describe its main characteristics:
Power - 2kW
Voltage - 220V
Case - plastic
Weight - 11.5kg
Engine type - electric
Power supply of the device - from the mains
Noise level - 105dB
Productivity - 80 kg / h
Chopping system of cutting knives
Max. branch diameter - 35mm.
Cutting speed - 3.6 rpm.

The shredder is equipped with two plastic wheels

a comfortable leg for stability, the weight is quite acceptable, so you don't need to make a lot of effort to roll it out.
This mobile shredder is equipped with a high speed motor and laser cut hardened steel blades

Since the shredder copes well not only with round branches, but also with grass, it has a completely wide funnel and a convenient plastic pusher.

It is better not to work with gloves, as they can be pulled into a funnel and it is good if without your hand. It is better not to neglect these rules!

Getting started. The shredder itself has only a built-in fork

We stretch the extension cord and connect it.

The extension itself can be hooked to the side of the shredder body.

On button - off. very bright, made in the same color scheme as the pusher,
located on the left side under the handle.

The branches must be cut off before crushing, so that there are no strong branches.
For example, in such a branch

we cut off all the side knots and get such a bunch

There is no need to cut along the length, if only it is very thick, then yes - we cut it.
Long branches are even easier to push into the crusher. In general, my machine itself pulls in the branches, but they still need to be guided and pushed a little. Be careful, the vibration is transmitted from the machine to the branches, and it can be very painful to whip if the branch is long and flexible. But experience with this technique is acquired quickly, and soon you yourself decide how to stand, which side to stand on, how close, where to push.

Here, after such a bunch of freshly cut twigs

the result is such a wonderful mulch.

My assistant can handle such a twig.

Sawdust is obtained from such a beautiful branch

A grape or a rose, the chopper clicks like seeds.
There was a pile of already dried lemon balm, and I threshed it.

I also grinded cucumber whips.

If a soft and flexible material is taken (cucumbers, tomatoes, grass or thin twigs with green foliage), then you have to push it with a pusher.

During work, I always have it at hand

It stands perfectly there between the handle and the funnel and, if necessary, I use it. And this need arises quite often. It happens that small branches are intertwined with each other, you have to push through, for this you do not need to turn off the chopper.
I had a dry pile of grass

It can also be ground, but it is not finely ground.

But nevertheless, I scatter it around the garden, as an organic fertilizer; over the winter, everything overripens and decays.

But this is only in the garden (I don’t have a lawn there, we just mow the grass with a lawn mower review on the lawn mower.) I do not recommend it in the garden, as seeds are crumbled from the grass, which will then germinate.
In the summer, under the weight of the fruit, a branch of a pear broke off, and now it’s its turn.

It also needs to be prepared by cutting off the branches extending to the sides.

Now we turn to completely dry branches, cut off in early spring, which were also waiting for their turn.

They, too, were crushed.

But here I want to note that fresh branches are easier to split than dry ones.
Dry branches are no longer flexible, moreover, thorny, and this causes a lot of inconvenience during work. Thin branches cling to each other and get confused, clog the exit hole of the already crushed material. If you see that sawdust does not come out, then you need to stop the machine, unplug it and disassemble the shredder in order to clean the exit hole.
Disassembled quickly and easily. Turn the black bolt (located just below the chopper handle) counterclockwise.

We twist until the upper part of the case begins to move away from the lower one.

We remove the entire front part of the case.

And this is how the exit hole can get clogged.

We remove all this, clean it and assemble it in the reverse order. We continue to work.

If, during operation, the crusher stops abruptly with a loud grinding, it means that some curved part of the branch is stuck and again must be turned off from the network, disassembled and eliminate the cause of the stop. This is usually the case if you leave the stumps while trimming the side branches from the central trunk. Actually, that's what happened to me.

I roll the knife slightly towards me

Here is such a small nuisance.

Small but smart!
The knife was sharpened once in the last year, since the volume of work is large. Our pruning takes place twice a year (in the main autumn and sanitary in the spring).
Dry ground branches were scattered under Bulgarian pepper, as mulch.

And from fresh branches with green leaves on a rose garden.

Last year, they cut it off in late autumn, the foliage was no longer only branches.
This is the mulch from last year.

Past grind and fresh grind are of course different from each other.

But by the next season, the leaves will dry out and the color of the mulch will become uniform.

He also has disadvantages - he does not really like these thin branches. He crushes them badly.

I chase them in the second circle, once again he will break them, nevertheless they become smaller.
And if you grind fresh juicy grass (I did it in the spring), the extracted juice from the plants, mixed with the ground grass, turns into a gruel that clogs the exit hole. You have to unscrew and clean often. But these disadvantages are so weightless that you close your eyes to them.
And here is the result of the work done:

As you can see, the field of activity of such a wonderful assistant as the Bosch Axt Rapid 2000 garden shredder is very extensive. I can’t even imagine how I used to do without him. How much useful organic material has been burned!
I have been using it for 2 years. And why didn't we get it before?
At one time, the purchase cost 9500 rubles.
Whoever has a garden plot, this is the first necessity!
Recommend - recommend and recommend again!

Each owner of a garden plot or adjacent territory makes a lot of efforts to ensure that the territory has an attractive appearance.

Wood chipper Bosch Rapid 2000

In this case, you can not do without chopping branches, grass and garden debris. An excellent assistant in this will be the Bosch Rapid 2000 wood shredder.

This model of garden tool is designed for shredding branches (up to 35 mm thick), fallen leaves, dry grass.

According to the survey, the equipment was included in the TOP 10 best gardening tools in terms of sales. The popularity among users is primarily due to the design feature of the device. If we talk about the main distinguishing characteristics of this shredder model, the following can be distinguished:

All these characteristics determine the ease of use, practicality and safety of working with the shredder.

Spare parts for the Bosch Axt Rapid 2000 can be bought in specialized stores at an affordable price.

Bosch Axt Rapid 2000 device

The device consists of the following main working elements:

The shredder has the following advantages:

Environmental friendliness. The presence of an electric motor does not imply the emission of harmful and toxic waste into the atmosphere, which are formed during the combustion of fuel.
The use of a powerful motor by the company's specialists provides a high indicator of the practicality and efficiency of using the device.
The presence of a speed regulator. It makes it possible to switch the rotation speed of the motor depending on the amount and strength of the mass to be crushed.
Quiet operation.
Low weight and dimensions. These characteristics make the mechanism easy to move and use. In addition, both men and women can work with the instrument.
An accessible principle of operation. No special training required.
The presence of wheels. Provides equipment mobility.
Using the reverse, which is used to clean the cutting element. It greatly simplifies the process of maintaining the instrument.
The price of a Bosch branch shredder is several orders of magnitude lower than similar tools, the design of which is equipped with a gasoline engine.

If we talk about the shortcomings of this model of the tool, we can only highlight the fact that there is a need for a source of electric current. The principle of operation of the tool is similar to that of a meat grinder.

Principle of operation

The sequence of actions is as follows:

The device is installed in a place convenient for work. In this case, it is necessary to take into account a prerequisite: the presence of a nearby source of electric current.
The mechanism is connected to the socket, and the start switch is brought into the working position.
The mass to be crushed is placed in the hopper. If there is a need to move it closer to the cutting knives, a convenient pusher must be used.
As the bag in which the crushed mass is placed is full, it must be cleaned out.
After all the debris and branches have been crushed, the device must be disconnected from the electrical network. Only then can you start cleaning the funnel and hopper from debris.

The principle of operation and the rules of operation of the grinder are quite simple and do not require special skills.

Shredder bosch AXT rapid 2000 - on video:

Have you noticed a mistake? Highlight it and press Ctrl + Enterto let us know.

I wanted to write at the beginning, but decided that the video would be more interesting to watch.
Therefore, I will write a minimum.

Pros:
This model of shredder fully copes with the tasks of the garden worker.
Simple design for easy maintenance.
In general, in fact, everything is fine and I am completely satisfied.

Minuses:
This is its cost, I think its real price is 7-8 thousand, but unfortunately, nothing can be done about it.
Noisy work, but it does not cause big problems.
Well, and the last is a knife, we could pay a little more attention to this (more on this in the video).
Hope the commercially available replacement knife is of better quality.
But my own knife is still quite enough for me.

In general, I am completely satisfied with the purchase, it is up to you to buy or not to buy, and I hope this video will help you make a choice.

That's all, good shopping, bye.

Good afternoon everyone! I decided to share my impressions of the purchase, or rather the operation of the Bosch AXT Rapid 2000 shredder. I bought this device for myself in the fall of 2015, when it was time to cut trees in the garden. Due to the large number of branches, the option of burning them did not bring much joy - this was painfully troublesome. Having considered all the options for such a technique, after reading the reviews and counting the money, I settled on this model as the most optimal option for me in terms of performance and price, taking into account bonuses.Unfortunately, after the purchase, I could not take pictures of the packaging, but in this regard, everything here is in the best traditions of the company: a large green cardboard box, inside which the device itself was located, wheels, a spatula for pushing branches, instructions. I didn't have any complaints about the quality of plastic, assembly and configuration.Well, now let's turn to the description of the grinder as such in more detail and on the features of its operation. So photos of Bosch AXT Rapid 2000 after the season of operation.The device is made in two colors: black and green, marking in the form of an inscription on a transparent film is glued to the body. Two red spots stand out - this is the power button and a spatula for pushing branches and foliage. The device stands on a metal support-arc, to which two large plastic wheels are attached. In combination with a comfortable handle, we get excellent transport characteristics - Bosch really rolls around the site easily and comfortably.By governing bodies. On the back there is a large red spring-loaded button for turning on the device, which has three positions. The first is shutdown, the second is normal operation, and the third is start-up. Those. to turn on the device, we move the switch to the second position, nothing happens, then we turn it to the end - the engine starts, and under the action of the spring, the switch returns to the middle position. What I liked: the developer was worried about abnormal situations: in the event of a strong "tension", the automatic equipment turns off the engine, and the switch returns to "Off".The next detail is the socket. More precisely a fork. To be honest, I have never come across such a design: an electrical apparatus does not have a cord. None. Just a built-in plug. Therefore, in order to joyfully get to work, you still have to buy an extension cord (if you do not have one), since there is no hint of this device in the kit. The “mother” of the extension is inserted into the shredder and secured with a spring clip.

Read also: Dvd lg DIY repair

Next to the switch there is a large bolt head that fixes the upper plastic shredder cover and at the same time serves as a safety device: without the installed cover and the screwed-in bolt, the machine will not turn on.In the upper part of the casing there is a feed opening, covered with red soft plastic flaps. They prevent accidental flying out of shredded parts of the tree. In general, everything is fine with a safety device and everything is provided for: automation, marking, red color of important elements. True, I would recommend the use of goggles and gloves: God protects those who are careful!A shredding unit is located under the casing, which is a rotating metal disk with a double-sided knife attached to it.The knife has both edges sharpened, so you can turn it over if necessary. To do this, remove the metal casing, fixed with 6 bolts, and unscrew the bolt with a hexagon.I want to say right away that I had to turn the knife over in the very first season, since it could not withstand the load, on the one hand, and on the other, the quality of its sharpening left much to be desired. It seemed to me that the edge of the knife was simply burned out, which caused it to become serrated very quickly. True, I tried to put everything I could into the grinder: dry and damp branches, foliage, grass. And I must say that the most optimal area of its application is raw branches with a small amount of leaves. It is difficult (and dangerous) to work with dead wood, leaves and grass quickly clog the chopper and often have to stop work.After passing through the cutter, the crushed parts fly out from the lower hole, and with sufficient acceleration. Therefore, in order to maintain cleanliness at the workplace, you have to either lay a film, or substitute some kind of container. I adapted the box from the MFP.According to technical characteristics. The engine is 2 kW, it works quite quietly (106 dB). The weight of the device is 11.5 kg, assembled in Hungary. The maximum diameter of the branches is 3.5 cm. Now a few words about the impressions of the operation. I must say right away that work is a pleasure. I don't like poking around in the garden, but with the advent of the chopper, I began to pay more attention to trees 🙂 However, so that work is not interrupted often, additional preparation of the material is required. If the branches have a cruciform branch, it is better to immediately chop off the excess with a hatchet, otherwise you will be tortured to push them into the chopper. The maximum thickness of the branches is more than 3.5 cm, but it is desirable that the tree is damp, the knife is sharp, and the pressure is not too strong. It is necessary to periodically rake off the crushed material from the “outlet” of the grinder, otherwise it quickly becomes clogged and you have to unscrew the upper casing and use the handles to clean the device.What do we have at the end? It depends on the source material, but it's not entirely accurate to call it sawdust or shavings. From an even thick damp branch, beautiful round washers are obtained. From thin - from 5 to 10 mm pieces. Leaves can slip through without treatment, or be chopped into several pieces. Sometimes the branch splits along. Where and how to apply all this, everyone decides for himself, you can sprinkle the paths, make a bedding under trees and bushes, etc.And finally, a few pictures of the 2016 season. As an object, there were three small out-of-place ash trees. Before:A small piece of video for a general introduction:

The Bosch AXT 2000 RAPID garden garbage shredder is an excellent assistant for putting things in order on the site. Leaves, twigs, remnants of roots are easily disposed of, or they can serve as a crushed fertilizer for the beds. This model is distinguished by the modern design of the funnel with a built-in pusher, which significantly increases the speed of work.

Attention! There is a peculiarity of connecting to the network - there is only a rigidly fixed plug on the body, therefore we recommend purchasing special cord.

The Bosch-Powerdrive engine has a powerful torque of up to 12 Nm;
Cutting knives made of additionally hardened steel;
Throughput 80 kg / h;
Additionally, you can purchase a collection bag 50 l for the Bosch AXT Rapid 2.605.411.073 shredder.

The bag is not included!

The manufacturer reserves the right, without notifying the dealer, to change the characteristics, appearance, equipment of the product and the place of its production.

The specified information is not a public offer

BOSCH AXT Rapid 2000 manual contains pages in Russian

Go to the download page for the file of this instruction: Download PDF

Ideal for all types of garden
material.
Want to chop up pruned branches without waking
neighbors? Without separating the grass from the branches of the bushes and
trees? Bosch can help you meet this challenge
with your silent chopper
with the "Turbine-Cut" system, which is suitable for
processing any kind of garden material.
With patented fast funnel
and automatic tightening mechanism
for fast filling and high throughput
capabilities. Removable for easy storage
the funnel fits easily into the grass catcher.

Turbine-Cut system New system

Turbine-Cut guarantees ultra-high
grinding performance as for
soft plant material and
for hardwood and work almost without
blocking.

Cutting shaft Optimized
the cutting shaft system ensures
maximum performance
chopping 175 kg / h for branches
diameter up to 40 mm.

Knife grinder cutting system
Durable, made with
laser technology knives with high
cutting performance for processing
soft plant material.

Guaranteed productive grinding.

What Bosch shredders have received in recent years
such high ratings from their users,
not an accident. Because Bosch innovates
in accordance with the wishes of users,
e.g. unique silent shredders
with the "Turbine-Cut" system, suitable for
shredding any kind of garden material.

Whichever chopper you choose, each
of which are amazingly powerful
and quickness, and you will have more time,
to enjoy the view of your garden.

The right shredder for any garden.

* Engine power: declared engine power - operating mode S6 (40%). It includes a load profile of 40 seconds of load and 60 seconds of no load for practical use.

Good garden tool. well crushes twigs from 1 to 3 cm, quickly disassembled for cleaning, lightweight. The AXT RAPID 2000 shredder helps you recycle thin (up to 3.5 centimeters) branches and grass. The organic waste obtained in this way can be disposed of or used for composting. Buying this model of garden equipment is the right decision if you need to recycle a small amount of waste (up to 80 kilograms of branches per hour).

wheels for moving the shredder around the site;
the presence of electrical protection;
convenient funnel and pusher for fast loading of branches;
sharp durable Swiss knives.

Video I tested the Bosch AXT RAPID garden shredder 2000 W - a good channel tool At the Dacha

The garden shredder is used to grind sticks, twigs and other natural waste. The result is an organic fertilizer for the garden and vegetable garden. The device can be of different power with power supply from the mains or a gasoline engine. The system of knives is milling and disc. The assortment of the BOSCH company covers the entire range of grinders.

A garden shredder is a device for processing leaves, twigs, fruits and other organic waste. Its use by the owners of a garden, a summer cottage or a private house is relevant.

The tool consists of a motor, a system of knives and funnel, a frame and a control panel.

Garden shredders are equipped with electric or gasoline engines.

Equipment with an electric motor is lighter. Its work is not accompanied by the exhaust of harmful gases and great noise. But it is less powerful than gasoline counterparts. And its movement is tied to the network. On average, it is designed for grinding litter up to 5 cm in diameter. Such devices are well suited for a plot of up to 15 acres.

For a large area with dense vegetation, it is optimal to purchase a gasoline grinder.Their power ranges from 3 to 8 kW with a funnel up to 8 cm. They are usually equipped with strong four-stroke engines. But the operation is expensive and requires constant costs for engine oil and fuel.

When choosing a tool, pay attention to the appearance of its funnel. The tilted cone is considered the most convenient shape.

A waste pusher is sold complete with a shredder. Since it is dangerous to push the litter with your hand or materials at hand.

It is useful to purchase an extension cord for working with electrical models. It will allow you to move freely around the perimeter of the site.

BOSCH organic litter grinders are divided into the Rapid 2000 and AXT 25 series. They allow you to maintain cleanliness in your backyard by disposing of waste.

The Rapid 2000 models are mobile and lightweight and plug-in. They are equipped with a motor with a power of up to 2 kW, which develops up to 3650 revolutions of the cutting knives per minute.

The diameter of the funnel allows you to grind waste up to 3.5 cm in diameter. The waste container is purchased separately from the device.

The cutting mechanism has a drum system. Knives are located around the rod. The top of the structure is covered with a casing to prevent injury. The throughput of the device is 80 kg / h.

The tool weighs 12 kg. It is equipped with two wheels and a handle for easy movement.

The cost of BOSCH Rapid 2000 garden shredders varies from 230 to 330 USD.

BOSCH AXT 25 models have a 2.5 kW motor with a throughput of over 220 kg of waste per hour. The size of the funnel allows you to chop branches with a 4.5 cm cut. The AXT 25 garden appliance comes with a waste bin.

Their noise level is 90 dB, as opposed to 105 dB for Rapid 2000 devices.

Eight knives are tapered and move in both directions. Rotation to the left or to the right is set by a button on the shredder body. The cutting mechanism is also adjusted depending on the thickness of the processed material.

The system provides high performance. And the branches inserted into the funnel will independently mix down until they are completely disposed of.

The device weighing 30 kg is moved using the chassis by the handle.

The price for cars ranges from 415 to 770 USD.

The Rapid 2000 and AXT 25 equipment comes with a two-year BOSCH warranty. And their motors and gearboxes are protected from overloads and voltage surges.

We have an authorized service, 700,000 spare parts, 90,000 parts, we service and repair all leading brands97 % our clients come to us again!Can't find your model?Our craftsmen have been trained by the manufacturer and are certified to carry out repairs and maintenance of equipment. We use original spare parts!All information on the site is posted in order to enable the buyer to familiarize himself with the product before purchasing it, and is not a public offer (article 437 of the Civil Code of the Russian Federation). Information about goods and services on the site can be updated within a few hours. Check the availability and cost of goods, as well as the current status of the repair with the manager by phone 8 (495) 221-07-05 from 10:00 to 18:00.