The shower stall, like any other technique, can break. Even the most expensive and high-quality products require repair work from time to time. The reasons for the breakdown can be different, from the negligent attitude of the owner and ending with voltage drops in the power grid.
The main reason for the termination of the comfortable operation of shower doors is the failure of the rollers. Throughout the entire period of use, it is on the rollers that a serious load is imposed. If the box doors stop opening and closing smoothly, it's time to replace the worn out parts.
When choosing spare parts, due attention should be paid to the diameter of the wheels. The difference in size should not exceed 5 mm. You should also know the distance that the door extends into the shower cabin, and the width of the groove. In the choice of rollers, it is best to give preference to options from stainless steel or brass.
Repair of a shower stall begins with the fact that the doors are removed. If rollers with eccentrics are installed, you need to turn the eccentrics down and only then pull out the door. When using rollers with needles, press the needle and remove the door. After the rollers have been replaced, tighten the locking nuts and put the doors in place. The rollers are adjusted using the adjusting screw. The fit of the shower doors and the ease of sliding depend on how correctly the setting is made.
You can extend the life of the rollers if you wipe the grooves of the arcs in a timely manner, preventing the accumulation of dirt and limescale. It is also recommended to adjust the rollers from time to time, especially when it comes to shower enclosures equipped with eccentric parts. Lubricate them with silicone grease at least once a month to provide protection against corrosion. Also, the reasons for the rapid wear are the use of aggressive household chemicals.
If, as a result of mechanical damage or exposure to an aggressive agent, traces of corrosion appear on metal parts, this problem can be solved without replacing components:
Repairing the shower tray most often consists in eliminating cracks. Cracks can occur as a result of damage to the pallet by a heavy object or under the influence of a significant weight of the user.If cracks appear in the top of the pallet, they can be repaired with a sealant applied to the back of the structure. If the crack is serious, the pallet will have to be replaced. It is carried out as follows:
All parts of the cabin are installed, the tightness of the seams is checked.
To eliminate the risk of the pallet sagging under the user's weight, additional guides should be placed under the structure. They are attached to the bottom frame.
In this case, the repair provides for measures to seal the equipment. To do this, remove the old sealant using a special tool or a knife and wash the booth frame with soapy water. Dry the surfaces and degrease them with a solvent.
The next step is to apply a new sealant. After the composition is applied, you should wait 3 minutes and only then proceed with the assembly. After the structure is assembled, we once again process the joints with a sealant, remove the excess composition with a rag.
Doors and hull repairs are one of the most expensive and troublesome. If the parts are broken, you should take measurements and only then go for new glass. When it comes to curved parts, their production can be ordered in special workshops.
VIDEO
If the hose is damaged, a complete replacement must be made. A breakdown of the watering can may be due to the failure of the switch. It will also have to be replaced. One of the most time-consuming types of repairs is considered to be the replacement of a sewer siphon. To dismantle the old part and install a new one, you will need to remove the pallet apron. During operation, you will need a special key and rubber gaskets. If the bend is clogged, disassemble and clean the siphon.
A non-working mixer can only be restored if you can find spare parts for it, otherwise a complete replacement of the device will be required.
Repair of electrical appliances in the shower stall must be carried out by a specialist. Incorrect connection can not only damage the entire electrical "stuffing" of the shower stall, but also harm the health of the user.
Showers have recently become the real favorites of buyers. Dimensional or compact, simple or electronically controlled shower cabins are successfully replacing traditional bathtubs both in city apartments and country houses. But this plumbing equipment cannot be classified as one of the simplest devices, so it is possible that even with a delicate attitude and high-quality care, the owner of the cabin will encounter a breakdown. How can a shower stall upset you?
one of the main reasons for breakdowns is the unprofessional installation of the cab ... Even a seemingly insignificant miscalculation made during installation can lead over time to cracks on the pallet, damage to glass, quick clogging of the siphon, etc. In general, all faults can be divided into three large groups:
Damage to body components. This group includes cracks in the pallet, loosening and falling out of rollers, cracks on glass, wear of plastic parts and rubber seals, leaks.
Problems with plumbing accessories. This includes siphon blockages, failure of the mixer, watering can, hose.
Breakdown of electrical equipment (steam generators, lights, radio, control panel, etc.)
If there is a problem with your cabin, then you can invite specialists or try to cope on your own. Below we will look at how to produce DIY shower repair .
Modern models are made from quality materials. Acrylic pallets, tempered glass doors, plastic parts serve for a long time and flawlessly, and only occasionally can fail the owner. What to do in a specific situation?
If you find there is a scratch and even more a crack on the acrylic coating , then the problem should be resolved immediately. Two-component liquid acrylic will help you cope with it. You will also need to prepare a set of tools and accessories (drill, sandpaper, degreaser, rag). The sequence of actions for eliminating a crack on an acrylic pallet is as follows:
Dismantle the shower stall and clear the acrylic pallet .
Wash it thoroughly with a mild detergent and dry well. To do this, you can use a lint-free cloth or use a hair dryer.
Drill holes along the edges of the crack ... Be extremely careful during this operation and do not make deep holes - the depth should not exceed 2 mm. Holes around the edges will prevent further crack growth.Treat the surface with a degreasing agent and wait until it dries.
Now apply acrylic ... The composition must be mixed in the proportions recommended by the manufacturer, and this must be done immediately before application. When covering the pallet crack, make sure the compound fills it all, but there is no surplus on the surface. Do not immediately lay out a thick layer of acrylic - it is better to apply several thin layers than one too thick and sloppy.
Air dry the pallet.
When the acrylic is dry, sand the restored surface with sandpaper and buff.
Assemble the cab by replacing the pallet.
There are a couple of important points to add to this. If on your pallet a hole formed , that is, it makes sense to think about replacing the pallet or purchasing an acrylic liner ... If the hole is small, then you can also deal with it yourself, following the algorithm described above. However, before applying the acrylic, you will need to apply fiberglass to the outside of the pallet and then cover the damaged area with epoxy. Wait until the resin hardens, and only then proceed with the acrylic coating.
In order to minimize the likelihood of cracks in the pallet, we need to take care of strengthening ... The easiest way to do this is with bricks and polyurethane foam. Lay a brick cushion under the pallet, without mortar, so that there is a narrow space between the pallet and the top layer. Then fill this space with low expansion foam. This will form a dense liner that will support the pallet and further prevent cracking.
model , equipped with a safety guard and doors made of tempered glass, turn out to be more durable. If you encounter this problem, you will need to dismantle the damaged panel. For this:
Remove the cab post (or several if the side glass is cracked).
Pull out the rubber seal.
Remove the cracked glass; in case the glass is broken, carefully remove the shards.
Insert new glass with seal.
Replace the stand.
Please note that this way you can replace the front or side panels. If a crack has formed on the back wall , then you will need to completely dismantle the cab.
Roller failure means you need to purchase new ones. ... When choosing them, keep in mind that they should be the same in size as the previous ones (the maximum permissible deviation in size is 5 mm). The replacement procedure itself is simple:
Remove the doors.
Remove the old rollers, replace them with new ones and tighten the locking nuts.
Mount the doors.
Do not forget that the rollers must be well adjusted, otherwise the cab doors will not open smoothly and are unlikely to ensure the tightness of the cab.
Rubber seals are designed to ensure the tightness of the cab and prevent water from flowing out of it. These details are not conspicuous, but if they are damaged, there is a high probability of loosening of the doors and the appearance of leaks. Seals can wear out from long-term use, but sometimes you can see that they dry out and crack just a couple of years after purchase. The reason lies in poor quality water - too hard water, which is supplied from the main water supply, contains solid microparticles. These particles hit all surfaces, including rubber. Soft seals over time begin to deform, dry out and crack ... In a situation like this, there is only one solution - replacement of these parts ... To reduce the likelihood of this problem occurring, regularly maintain the cab and clean the rubber parts with special compounds.
If after bathing you constantly find puddles in the bathroom, then another problem overtook you - depressurization of the shower ... Leaks happen either due to the fact that the cab was initially mounted incorrectly, or due to the fact that the sealant has worn out at the joints. The problem areas in such cases are the seams between the pallet and the screen and the joints between the walls and the pallet. It is not difficult to get rid of the leak, for this you only need a new sealant. Proceed as follows:
Remove old sealant. If possible, do not use sharp objects, but if you cannot clean the surface, then use a knife. Be careful during this operation - the sharp blade may scratch the surface.
Disassemble the cockpit. All places that will be treated with a sealing compound, rinse well with a mild detergent, then treat with a degreaser and dry.
Apply sealant, wait a few minutes and assemble the cab.
When the structure is assembled, once again go over the already treated places with sealant. If you have applied too much of the compound, simply remove it with a lint-free cloth. It is possible to turn on the water in the cabin only after the sealant has completely dried. .
The faucet, watering can and hose are reliable accessories, especially for products from trusted manufacturers. Nevertheless, unpleasant incidents can happen to them. In some cases, it makes sense to decide on the purchase of a new device, while in others, do-it-yourself plumbing repair will help.
If the mixer begins to switch poorly or leaks, then it may be clogged cartridge or faucet ... Such phenomena are a consequence of the presence of small particles of lime, salts, and rust in tap water. Disassembling the equipment and changing the cartridge or cleaning the tap will help to correct the situation. Also, leaks happen when the rubber rings wear out; in this situation, you just need to replace them.
If you see there are cracks on the mixer , then there is only one way out - acquisition of a new accessory.
Does the water flow poorly from the watering can? Do you not feel the same pressure of water during shower procedures? Maybe, nozzles are clogged in the watering can. You can clean them by treating the watering can well with a vinegar solution or by mechanically cleaning each hole. If there are cracks on the watering can, from which water is oozing, then replace it with a new one.
The flexible hose is considered one of the weak points of the mixers. If a leak occurs at the point where the hose is connected to the mixer, then most likely the matter is that the union nuts are loosely tightened or loosened during operation. Tighten the nuts, the problem will probably be solved. Another likely cause is wear of rubber pads ... This problem is eliminated by replacing the gaskets.
In the event that water flows out of the hose in other places, it is likely that the plastic tube inside the metal one has leaked. If the leak is close to the ends of the hose, do the following:
Unscrew the watering can, remove the fitting and remove the flexible polymer tube from the metal sleeve.
Find the area with the defect and cut off this part.
Insert the tubing into the sleeve, secure the fitting and put the watering can in place.
If you find that the plastic tube is leaking in the middle, then these manipulations will not help you, the best solution would be hose replacement .
Blockages in the siphon arise from the accumulation of particles of skin, detergents, hair, animal hair, etc. A small blockage is disposed of by pouring soda into the drain hole and pouring vinegar into it. After a violent reaction has passed, the drain is flushed with a strong stream of hot water. In more complex cases you can use a special cleaning agent for plumbing or use a plunger .
Modern shower cabins are supplied with pleasant additions - steam generators that create the effect of a bath, radio, lighting of different colors, etc. The control of accessories is carried out by means of electronics. It is not recommended to repair these parts yourself. , in order to put the accessories in order, you should contact the services of specialists.
Online store> presents sanitary equipment of the Russian brand Domani-Spa.
Showers of various shapes and sizes, mixers and acrylic bathtubs - on our website pages you will find everything you need to renovate or re-equip your bathroom.
You can pay: in cash upon delivery, by credit card upon delivery, by credit card on the website, in cash upon pickup from the warehouse, by invoice for legal entities.
Delivery, unloading and lifting are carried out according to the tariffs. Delivery is carried out within 24 hours after order confirmation. Orders for the delivery of goods are accepted from 9:00 to 16:00, the delivery time is until 20:00 on the day of order or the next day in the interval from 9:00 to 20:00.
Broken and jammed doors are a fairly common problem for both brand new shower cabins and those that have been in operation for many years. The main reason is the failure of the door rollers. It is not difficult to repair them, the main thing is not to break the heavy glass door.
It is the rollers that ensure the smooth movement of the shower doors.
Each time the flaps open and close, these parts are under severe stress, as a result of which they quickly wear out.
Moisture and aggressive effects of household chemicals are other causes of wear.The most common types of door faults are:
Diagram of the device of the shower cabin.
The rollers make an unpleasant squeak, which is caused by their corrosion due to high humidity. It is impossible to repair them; they must be replaced with new ones.
Doors are ripping off the guides. To eliminate the breakdown, check the attachment points of the shower stall. You can repair the rollers by gluing loose tires in place, but such repairs are temporary. Worn parts should be replaced with new ones as soon as possible.
A jammed door means that the rollers have completely exhausted their resource. In this case, it will also be impossible to repair them, only a complete replacement will help.
In case of any serious breakdowns, it is recommended to repair and replace all rollers, not just 1. When selecting new parts to replace broken ones, pay special attention to the diameter of the wheel. A larger or smaller part will do, but the difference should not be more than 5 mm. You should also measure the width of the arc groove and the overhang - the distance by which the door goes into the shower.
To make the choice easier, it is better to take the broken video with you to the store or take a photo of it. It is not necessary to spend a very large amount of time choosing the right spare parts for your shower stall model. Sometimes a “non-native” video can be of better quality than a “native” one. Parts made from brass or stainless steel will last much longer than parts made from silumin.
To fix it, you need the following tools:
Phillips screwdriver and pliers (to replace rollers with eccentrics);
knife or needle, screwdriver (to replace the pressure rollers).
Shower cabin installation diagram.
The repair itself begins with the removal of the cab doors. This should be done very carefully so as not to break them. If the door rollers are equipped with eccentrics, then the eccentrics should be turned down so that the door freely leaves the profile. If there is a special button on the roller, just press it to release the door. It is advisable to carry out repairs in the presence of an assistant, since the weight of glass doors can reach 15 kg and more.
When repairing the rollers, it is important not to confuse the lower and upper ones, otherwise the doors will fly out of the profiles and break. It is not necessary to tighten the fixing nuts all the way to avoid damaging the glass and rubber gaskets.
After the doors have been put in place, the rollers should be adjusted using the adjusting screw, which is equipped with all models. Correct adjustment will ensure that the flaps fit properly and slide easily.
Regular maintenance of the shower stall will significantly extend the life of the casters. From time to time, it is necessary to wipe the grooves of the arches so that limescale, dirt and debris do not accumulate in them. If the doors open forcibly, remove them, check the grooves and clean if necessary. Since repairing a broken cab door is time consuming and costly, it should always be removed with great care.
VIDEO It is equally important not to forget to adjust the rollers, because due to the constant load, their settings get confused, and they begin to slide along the profile. This happens most often with models equipped with eccentrics. Therefore, once a month, they must be re-adjusted and lubricated with silicone grease to protect them from the effects of high humidity and corrosion. An effective water softening system will eliminate the need to make repairs too often. Ideally, shower doors should move smoothly, softly, without jerking, but not too relaxed. Do not clap them too zealously when you are about to shower.
Then the question arises: how to fix the resulting breakdown? There are two options. The first is contacting specialists who charge a lot of money for their services. And the second is an independent solution to all problems. Of course, repairing shower cabins with your own hands is a troublesome process. But if you have the knowledge and skills, you can fix the malfunction yourself, saving money on the services of qualified craftsmen.
First you need to talk about why shower cabins break down. The main causes of malfunctions are poor-quality installation, non-observance of operating rules, interruptions in the electrical network. All breakdowns are conventionally classified into three groups:
damage to body elements - failure of hinges and rollers, with the help of which the doors are opened / closed, wear of plastic parts, cracks in the pallet or in glass elements.malfunction of plumbing equipment - breakdown of the mixer, problems with the siphon, failure of the watering can and the hose.malfunction of electrical appliances - modern shower cabins are equipped with a variety of devices: lighting, radio, water level sensors, speakerphone, steam generator.If the breakdown is serious, and you do not have practical skills and theoretical knowledge in the field of electronics, call a specialist. Illiterate actions can disable the entire system and harm users.
Do-it-yourself repair of shower cabins must be carried out competently. To carry out a number of works, you will need different tools and materials: a hammer, glue, putty, plumbing sealant, a sharp knife, a set of screwdrivers, pliers, liquid acrylic, hardener, drill. If broken parts and components cannot be repaired, replacement is required.
Many consider the purchase of a new pallet to be the easiest way to solve this problem. But it’s not that simple. Finding an identical acrylic liner is extremely difficult. If you don’t have extra money, or you don’t find a part suitable for the size, carefully read the further recommendations.
Elimination of cracks in the pallet is carried out in several stages:
first, the cab frame and pallet are dismantled;
then the cracked product is visually inspected;
at the next stage, the pallet is washed out and dried thoroughly;
further it is necessary to join the crack. To do this, you need to install a special nozzle on the drill and carefully (a couple of millimeters) open the crack. To prevent the crack from growing in the future, two shallow holes are made along the edges;
the working surface is thoroughly degreased. An alcohol-based solvent is suitable for this purpose. This is an important aspect because other substances can change the structure of acrylic;
then you should prepare a mixture consisting of liquid acrylic and hardener. Do-it-yourself repair of shower cabins must be carried out in accordance with certain standards. Therefore, it is necessary to strictly observe the proportions indicated in the instructions;
the prepared mixture is applied to the surface. In this case, you need to ensure that the solution fills all the cracks and does not form depressions;
the pallet is taken out into fresh air, and after drying, the formed tubercles are cleaned with sandpaper;
at the final stage, the pallet is installed, all parts of the cabin are mounted and the tightness of the seams is checked.
And one more important point. If a through hole has formed in the pallet, it is necessary to additionally use epoxy resin and fiberglass. These materials are applied to the outside of the acrylic liner in several layers. This procedure must be carried out promptly, because the resin hardens quickly.
Is it possible to protect yourself from cracks in the pallet during operation? Yes, for this you need to lay out a brick pillow under the bottom and fill the space with polyurethane foam. By following the above recommendations, you can easily do the repair of shower cabins with your own hands. The main thing is to have the desire and the necessary materials and tools.
The failure of rollers is a key reason for the termination of the normal operation of doors. Small parts carry a heavy load, so breakdowns are common. If the rollers creak or the box doors start to jam, parts need to be replaced.
When buying spare parts, you need to pay attention to the diameter of the wheels. In this case, the difference in dimensions should be no more than 5 mm. It is also necessary to have other information: the width of the groove, the distance to which the box door extends inward. If you want to buy quality casters, give preference to products made of brass or stainless steel.
dismantling of doors;
removing the rollers - to carry out this process you will need a Phillips screwdriver and pliers;
at the next stage, new parts are installed and the fixing nuts are tightened;
installation of doors;
adjustment of the rollers - the tightness of the fit of the flaps, the ease of their sliding along the guides depends on how competently this process will be carried out.
Do-it-yourself repair of shower cabins (replacement of rollers) is an easy job that any man can do. If you want to protect yourself from future breakdowns, you need to treat the wheels with an anti-corrosion agent. Then, under the influence of water, they will not rust.
Video: repairing a roller in a shower stall quickly
VIDEO
A few words should be said that any metal parts of the booths are covered with rust. If you find a damaged area, follow these steps:
sanding the area affected by rust;
processing with auto-putty;
cleaning the treated area;
surface degreasing - acetone, ammonia is suitable for this purpose;
staining damage - paint in spray cans is used.
In most cases, the cause of leaks lies in illiterate installation and poor-quality seams. To eliminate the problem, it is necessary to carry out work to seal the components. This process goes as follows:
the old sealant is removed from the cab - a sharp knife is used for this. You need to act as carefully as possible, trying not to scratch the surface;
disassembly of the booth frame - the components are washed with soapy water, dried and degreased with a solvent;
in the next step, a new sealant is applied;
a few minutes after applying the composition, you can start assembling the structure;
at the final stage, the joints are again treated with a sealant, and the excess is wiped off with a dry cloth.
When taking hygiene procedures, water splashes onto the walls and other elements. As a result, with improper care, limescale appears, the seals lose their elasticity, crack and begin to let water through. To prevent this from happening, you need to regularly use special care products. Then the repair of shower cabins with your own hands will not interest you.
During the operation of the shower stall, various troubles happen: the mixers fail, there is a leak in the hidden pipelines, the siphon gets clogged. For troubleshooting, we advise you to pay attention to two important points:
breakage of the watering can - it occurs due to the failure of the switch. The best option in this case is to replace the watering can;
clogging of the sewer siphon is the most time-consuming type of repair. To fix the problem, you need to dismantle the pallet and remove the siphon. Then the part is disassembled and cleaned.Well, then everything is installed in the same places. To carry out this process, you will need rubber pads and a wrench.
The weak point of shower stalls is the mixers. If the plumbing fixture is clogged with small particles, rust, it is necessary to clean the filter. Every man can handle such a simple operation. If cracks appear on the mixer body, you can forget about repairs. The solution to the problem is unambiguous - replacing the crane.
During the operation of the mixer, users also face other problems:
leakage over switch - it occurs for several reasons: the nuts are loosely tightened, the rubber rings are worn out. Repair work consists in tightening the nuts and replacing the gaskets;shower modes do not switch - a similar problem occurs due to the appearance of a crack in the cartridge. To solve it, it is necessary to replace the part.With a competent approach to business, you can repair shower cabins with your own hands, saving your family budget. The main thing is to be careful and follow the advice provided in this publication.
VIDEO
Every owner of a shower stall with sliding doors knows how often the door canopy roller breaks down. They simply stop rotating, because the metal bearing inside the roller is rusty, and there are plenty of reasons for this, hard water and, as a result, the frequent use of acidic detergents is the main reason. The store sells a roller assembly repair kit, but the price of it bites, and the next jamming occurs after a couple of months of use. Therefore, there is a reason to independently restore the old bearing or replace it directly with a new penny bearing.
We remove the jammed roller directly; it is not necessary to remove the entire door.
Use a thin knife blade to pry on and remove the oil seal (boot) of the bearing holder.
Now everything becomes perfectly clear, what is on what. Despite the presence of grease, the acids did their job and the balls became covered with rust, which prevents them from spinning freely.
To put it more precisely, applying maximum efforts and devices, it was simply impossible to swing and rotate this bearing.
So I had to use a solvent to remove the grease and then a rust converter.
As a result, after 15 minutes, the balls began to look like this.
Next, we rinse with kerosene and swing the bearing on the move, it should break off and go a little.
Now we put in new grease and close the boot in place.
If it is possible to purchase new similar bearings, then to replace them, you need to support the roller on a double support and, using a suitable punch (nail) installed inside the copper bushing, knock it out of the bearing with small but sharp hammer blows. Then put a new one and rearrange the plastic roller holder.
We assemble and install in the reverse order, the main thing is to make sure that the door does not fall or break.
Video (click to play).
After such a repair, the bearing works much longer, perhaps better lubrication or more of it than the manufacturer.
