In detail: do-it-yourself electric stove eyelid repair from a real master for the site my.housecope.com.
Thanks to such a versatile energy as electricity, the popularity of electric stoves is growing. This site has an article on how to connect an electric stove, and this page describes common problems, methods of identifying and eliminating them.
In many cases, a home craftsman or an ordinary user can make repairs to the electric stove with his own hands, without resorting to expensive specialist services.
Electric cooking
Regardless of the model of the electric stove and the type of burners used, the identification of the cause of the failure of the electric stove should be carried out according to the following algorithm:
Check with a voltmeter for the presence of a supply voltage (it is possible that the circuit breaker on the stove connection line has tripped, the wiring is damaged, or the outlet is faulty;
Make sure that the plug and the power supply cord are in good working order - the glow of the control lamp or electronic indication on the control panel automatically excludes this malfunction;
Disassemble and check the power outlet
Troubleshooting the electric stove
The task of any repairman is localize the problem ... Having gone through this algorithm step by step, you can repair the electric stove with your own hands, having a small set of tools available and having limited knowledge in electrical engineering.
The most important condition on which not only the successful repair of the electric stove depends, but also the safety of the master and those around him, is knowledge of the basics of electrical engineering and electrical safety. You also need confidence in your abilities - some measurements will have to be made with the voltage turned on.
Video (click to play).
From the tools for disassembling the body of the electric stove, you will need screwdrivers with suitable tips, perhaps a set of keys, pliers. For work inside the case, depending on the detected malfunction, you will need a soldering iron, wire cutters, electrical tape or heat shrink tubing.
Repair tool kit
Sometimes it is possible to identify a problem only by visual inspection (carbon deposits on the contacts, or a soldered wire). But, practice shows that in most cases it is impossible to repair an electric stove without measuring instruments.
Inspect the connections to the terminals
The most acceptable would be to use a multimeter - a multifunctional measuring device, which should be used by any master dealing with electrical engineering. In some cases, you can get by with a voltage probe and a homemade continuity from a light bulb and a battery.
If the mains voltage is normal, and the stove suddenly stops working after switching on, then it is worth checking the outlet itself - perhaps it does not correspond to the power, or the contacts are worn out, and they spontaneously bend during the heating process.
There are cases that in electric stoves with mechanical regulators and burner power switches, the control lamp burned out long ago, and the stove itself stopped working properly much later. At this stage, without starting to disassemble the case, it is possible to identify a malfunction in the switches, including various burners and switching modes their work.
The two burners of the electric stove do not work
If it is found that some of the heaters are working, albeit not at full capacity, then the malfunction of the power cord can be excluded, and you need to look for problems in the switches or in the spirals of the burners.
It is unlikely that all burners will burn out at the same time (although this is possible if all heaters were running during a power surge).Therefore, if there is no reaction to manipulation of the switches, the voltage may not be supplied to the controls.
Since electric stoves and hobs come in a variety of shapes, sizes and designs, there is no way to describe them all in one article, so the user must independently figure out how to disassemble the case. But common to all types of electric stoves is the presence of thermal insulation and it is necessary to work with it very carefully.
Various designs of electric stoves
If the thermal insulation layer of the electric stove is significantly damaged, its energy efficiency will decrease, as well as the readings of the temperature sensors will change, which will entail the stove's malfunctioning in the future.
It must be remembered that it is necessary to work with glass wool thermal insulation only with thick gloves, and the asbestos dust of the thermal insulation gaskets of old electric stoves is harmful to health.
Having disassembled the body of the electric stove, it is necessary to study the internal structure of the equipment, determine the type of regulators, switches and heaters. It will be very handy to have in stock plate layout ... But even without a circuit, knowing the basics of electrical engineering, you can understand the heater control system and identify the problem.
Attention, the following verification methods are contrary to the user's instructions, which prohibit turning on the electric stove when the case is disassembled, so you should be very careful!
If the electric cooker does not work at all, you should check for the presence of voltage at the input of the switches or the electronic control circuit. Imported electric stoves with an electronic control unit are vulnerable to power surges, and very often problems in them are not related to damage to the heating elements.
Electronic control unit for electric stove
If the power cord is OK, and the voltage is on, and the display does not light up, then the internal fuse of the electric stove control unit may have blown. But the indication of a working display does not always guarantee its performance - perhaps there was a breakdown in the power switching relays.
The most accessible way to check the control unit is to check the voltage supply to the terminals of the burner heaters. If the voltage comes in, but the heating element does not heat up, then you need to disconnect the electric stove from the outlet, then disconnect the terminals from the heating elements and ring them.
Checking the supply of voltage to the terminals of the coil of the burner
It will be safer if you first attach special crocodile clips to the terminals of the heating elements, which are put on the measuring probes, and then apply voltage. If only part of the burners is working, then it will be more expedient to ring the heaters first, and only then look for an open circuit in the power circuit. It must be remembered that heating elements can have several coils - the heating power is regulated by the way they are connected together.
If a burnout of the filament or a breakdown on the case is detected, the damaged heating element should replace .
VIDEO If the stove is old, then it is worth replacing the burned out heaters with more advanced and economical ones. The best electric heaters have proven themselves for electric stoves.
If the continuity of the spirals did not reveal any malfunctions in them, then the cause should be sought in the control unit. As already mentioned, heating elements can have several built-in coils, which are switched using switches or electronic relays. In both cases, a large current flows through the contact groups, from which carbon deposits form on them.
Switch for operating modes of the electric stove
Let's say the heating element of an electric stove has two spirals: C1 and C2. For their switching, a three-position switch with three contacts can be used: K1, K2, K3.
Connection diagram of a heating element with two coils
When K3 is turned on, both spirals are connected in series and will work at half their capacity. When K2 is turned on, the C1 spiral will heat up at full strength. The maximum heating will be obtained with the simultaneous closure of K1 and K2 - two spirals will be connected in parallel. All other possible options are meaningless and should be excluded by the switch design itself.
To fix such a switch, you need to disassemble it and get to the contacts to clean them with sandpaper or a thin flat file. You also need to check the tension of the hold-down springs and the fit of the contacts. Cleaning the surfaces, tightening the springs, and bending the contacts will help fix the problem.
VIDEO Connection diagram for a hotplate with three spirals
To ensure the versatility of the heating disc, the built-in coils have different power, and accordingly their resistance is different. More details about checking and connecting such burners are shown in the video:
VIDEO
In the absence of a characteristic click of the relay, ring its coil and check for the presence of a control signal. In the absence of a control signal, a breakdown may be in the output stage or in the microprocessor of the electric stove. To independently repair the electronic control unit, you must have its circuit at hand and have knowledge of radio engineering.
VIDEO For heating elements and disk heaters of electric stoves, it is often used stepless power regulator ... In old domestic slabs, a regulator on bimetallic plates was used, which reacts to the flowing current. In addition, a temperature sensor or thermostat can be installed that reacts to the heat of the heating element.
Electric hob heating thermostat
In such systems, heat generation is controlled by alternately turning on and off the electric stove heater when the temperature is lower or higher than the range set by the regulator. You can get acquainted with the operation and connection of such a regulator by watching the video below:
VIDEO
In case of failure of such a regulator, an identical replacement can be found. But it will be more expedient to install a modern power regulator based on a triac (it works like a dimmer for a lighting system).
Since the triac power control is carried out by changing the shape of the sinusoidal voltage (cutting off part of the half-wave), almost any regulator designed for a given power and current, but taken with a reasonable margin, will do.
Triac power regulator
In some electric stoves, the triac is installed together with a heat sink on the board. If the burner is operating at full power and the heating does not adjust, then the transition in the triac is broken, and it must be replaced.
If there is no current at the output of the electronic regulator, you should check the sawtooth bias voltage at the control electrode of the triac when the electric stove is switched on. This test is carried out with an oscilloscope, which is available in special workshops and some masters with deep knowledge of radio engineering.
Sometimes the electronic control unit is OK, but reacts to incorrect readings of the thermal sensors of the heating control system.You need to find out the type of sensor, study its properties and test methods in order to exclude this option for an electric stove malfunction. It is also possible that the mechanical timer breaks down, the contacts of which are also susceptible to corrosion and oxidation.
VIDEO
VIDEO
Various devices can be used for cooking, but due to their frequent use and intensive work, they are especially prone to breakdown. Repair of electric stoves can be done with your own hands at home, without taking out bulky equipment to a service center.
Despite the external complexity, this device has a very simple design. All working elements are installed in a special heat-resistant cabinet made of alloy steel.
The principle of operation of the electric stove is based on heating the heating element by means of an electric current flowing through it. The device is equipped with heating elements that are necessary for cooking. They are ceramic, tubular, halogen, solid.
Ceramic burners are presented in the form of a tube, so they can be used for any electric stoves and it is very easy to repair them yourself. The spiral fits into the hole in the plate and is secured with the help of special parts. Now more and more glass ceramics are used, which are more affordable and durable, in addition, it is amenable to washing;
Halogen burners are considered economical, they work due to halogen lamps with reflectors. These lighting devices are installed in different parts of the hob and provide fast heating and low consumption of electrical energy;
In old domestic tiles (Dream, ZVI and others), cast-iron spiral heating elements were often installed. They heated up slowly, but after turning off they gave off heat for a very long time. Separately, it should be noted their durability and resistance to moisture and high temperatures;
The tubular spiral is made of a hollow tube. When heated, it not only gives off heat, but also promotes the circulation of warm air inside itself, which makes it possible to increase the efficiency of the device. This type of burner is the most difficult to repair yourself.
To power the stove, a power wire is used, which is connected to all burners. In addition, they also connect to regulators and thermostats, which act as a safety system for the appliance. After switching on, the wire begins to transmit energy to the heating element, which is necessary for cooking. You need to control the heating level and the hotplate using the appropriate knob. Many household stoves Ardo (Ardo), Indesit (Indesit), Electrolux (Electrolux), Zanussi (Zanussi) and others, in addition to these devices, also have built-in timers and alarms. They help control cooking times.
Unlike gas stoves, electric stoves are considered fairly safe in everyday use. Their repair and maintenance can be easily done by yourself, and in terms of durability they are much better than gas models. In particular, this is because they can be cleaned at home, and not wait for the arrival of a specialist.
Typical malfunctions :
A burning smell appears during operation. If you are worried about the smell of burnt food, then repair is not needed, you need to clean the cooking surface. If it stinks of plastic or rubber, then you need to urgently call an electrician;
The hotplate does not heat up.This could be due to a lack of voltage, a coil or control handle problem. Repair of the burner or its wire will be required;
Heating temperature not adjustable. It will definitely require repair of the mode switch;
The hotplate does not heat up. A common problem with tabletop and stationary cookers is that their spirals crack. They can collapse as a result of an impact or from a sharp temperature drop (for example, the spiral heats up, and cold water accidentally gets on it). This is the reason for the lack of heating of the burner or uneven heating of food. Self-repair of the spiral is very easy to carry out without the help of a master - more often than not, it just needs to be replaced;
Poor oven performance. Most likely, the problem also lies in the breakage of the spiral.
It should be noted right away that the branded service will not undertake to carry out warranty repairs after outside interference. Therefore, if you do not have such experience, then it is better to immediately contact specialized workshops.
Before starting to repair the device, you need to disassemble the case and get to the main elements. Depending on the design, on the panel or on the back wall of the Ariston (Ariston), Beko (Veko), Bosch (Bosch) electric stove and others, threaded connections may be located. They must be carefully unscrewed and removed. The table is attached with four screws, if removed, the panels can be lifted and removed to the side.
You will see the wires that go to the burner - these are the power cables and switches. They must be removed, because otherwise, further disassembly will be impossible. Burner removal scheme looks like this:
First, the grounding clamping nut is unscrewed;
It comes off neatly;
There may be a ring or bracket under the ground, which serves to press the part as tightly as possible to the base;
The burner can be installed either on the thread or simply inserted into the hole. Depending on its design, you need to lubricate the threaded element with oil and unscrew the part from the case, or simply pry it off with a flat screwdriver and take it out.
After that, you will have access to the internal connections of the device. It should be noted that the main elements of the hob are located directly below it, below (on the bottom, under it, on the back wall) are the oven parts.
Consider how to clean ceramic hobs from Hansa (Hansa), Gorenje (Combustion), AEG and others. It is imperative to disconnect the device from the mains, otherwise you may get an electric shock. With a damp cloth, you need to wet the dirt on the surface of the burner and wait a few minutes, then gently clean off the build-up with a sponge or soft brush. In no case should a metal brush be used, otherwise the integrity of the spiral and powder coating may be damaged.
Step-by-step instructions on how to replace or repair a switch for household electric stoves:
It is necessary to turn off the power and turn the knob of the switch from the off position to the minimum heat. In the process, a lye should be heard, which indicates the operation of the thermostat;
If there is no click, then the regulator is faulty. For an additional check of the thermostat, you need to leave it in the middle position and turn on the power - the protection should turn on and off every half a minute;
Before removing the handles, be sure to read the "User's Guide", some models of plates are non-separable (Hephaestus, Kaiser);
The first to remove are the handles, which are used to adjust the outside. Then, using screwdrivers, the front panel is unscrewed;
Under it is a bar that presses the switches. It also needs to be unscrewed and the broken part removed.
What to do if the spiral is cracked :
Unplug the electric stove from the network.In most cases, repairing the coil is impractical, so it will need to be replaced;
Remove the top hob;
Under it there is either a hole for ceramic heating elements, or a recess for solid cast iron or halogen ones;
You need to very carefully pry on the part and remove it. Disconnect the contacts from the switch and the power wire beforehand;
Install the replacement coil in a similar way.
Video: replacing burners on an electric stove
VIDEO
Today, the popularity of household appliances powered by electricity is constantly growing, but minor breakdowns sometimes occur during operation. The electric stove is present in every modern kitchen - it is the heart of this space. When a kitchen assistant fails, many home craftsmen are interested in whether it is possible to repair an electric stove with their own hands?
Firstly, a home craftsman who decides to repair an electric stove on his own must at least understand electrical appliances, know the elementary fundamentals of electrical engineering and safety rules when carrying out this type of work. Secondly, you need to be sure that you can perform such a complex repair, and most importantly, find and eliminate the root cause of the breakdown. Third, it is necessary to prepare special tool.
When dismantling electric stoves, you will need screwdrivers for various purposes: for a cross or slot, with different thicknesses, the so-called tip specialists. You will definitely need keys - open-end and capscrews, pliers, wire cutters. For internal work in the body of the product, a soldering iron, side cutters, an insulating tape and, of course, a special device for measuring voltage and resistance are useful.
The photo shows only an approximate set of the necessary tools - during work, the assortment of the tools used tends to significantly expand.
The electric stove looks very impressive - it is a complex household appliance, but its design is quite simple, and all the main working elements are in a special heat-resistant housing which is made of stainless steel.
The principle of operation is similar to all electrical household appliances: the current, passing through heating elements (TEN), heats them to a predetermined temperature. The stove has several burners on the hob, and their number varies: at least two, and the standard is 4. For example, the budget Mechta 15M electric stove has only two burners and a small oven, and the product of Belarusian engineers Hephaestus has a standard set of burners and a voluminous oven.
Burner structure quite varied. Classics are burners on an enameled hob with heating elements inside, modern ones are solid ceramic surfaces with heaters of various types built into them. Let's consider the main types of burners.
Old domestic options are equipped with products cast iron , they slowly heat up and also cool down, creating a steam effect in the kitchen, but they are resistant to moisture and high temperatures.
Tubular spirals - they are made from a hollow tube , when heated, such devices not only give off heat, but also promote the circulation of warm air inside their case, which significantly increases their efficiency. These products are very difficult to repair yourself.
Hotplates ceramic they are very simple in design, they are easy to repair at home - the nichrome spiral is placed in special cells in a circle and fixed. In modern models, glass-ceramic solid plates are increasingly used - they are more durable and easy to clean.
Halogen devices - these are special burners with a similar emitter, which are installed in different places on the hob.A stove with such burners provides quick heating, in a second, and low power consumption, so they are the most economical, but only professional craftsmen can repair them.All models of modern stoves to transfer current to the burners use power wire special section, in addition, they are connected to regulators and thermostats, ensuring their protection against overheating.
In different models, the heating level is controlled in different ways: by manually changing the cooking mode or by special timers and alarms that control.
During the operation of electric stoves, users may encounter such typical malfunctions.
Sometimes when the product is turned on, burning smell - it is necessary to turn off the stove and inspect the burners, on which the remains of burnt food could remain, which can be easily removed. When there is a smell of burnt plastic or rubber, then you need to call the master.
The heating element does not heat up - here is the fault of the burner or the connecting wires, but first you need to check the controls, maybe the contact has gone away.Impossible adjust the optimal temperature heating the hotplate - it is necessary to repair the switch.
The hotplate does not heat up - if you have a spiral inside, then it often ruptures from overheating or moisture ingress. In this case, it is very easy to repair the electric stove - replace the spiral, that's the whole repair.The oven is not working well - it is necessary to ring the heating elements, in 100% it is their fault, replacement is required, since they are not being repaired.Attention! If the electric stove was connected independently, then not a single service will do repairs for free - you have lost the right to warranty service.
The process of finding equipment failure does not depend on the model of the product and the type of hob or the burners installed on it.
First, using a voltmeter, you need to check the voltage. Do not exclude the possibility of the circuit breaker being triggered, the insulation of the wiring may be broken or the reason lies in the outlet ... If so, then it is necessary to disassemble it, and clarify the reason.
If the indicator lights up on the control panel, and the stove does not work, then there is no power supply to the burners, which means that you need to disassemble the stove.
The correct operation of the mechanical or electronic control unit should be checked - measure the current flow to the burner terminals with the device.
Check the heating element of each burner to find a burned-out coil.
Inspect all thermal sensors, relays and various regulators.
Our task is to find a malfunction and localize the resulting problem. After following all the recommendations, you will find the reason for the failure of the equipment, and we will tell you how to fix it a little later.
Models of slabs are different not only in external shape, but also in size, design - it is impossible to describe a disassembly algorithm that will fit all products. Common factor for all is the presence of a thermal insulation layer - here you need to work with him very carefully. Users should be aware that the asbestos dust from the gaskets under the burners in older models is very harmful to health - keep this fact in mind when disassembling archaic stoves.
initially the hob is dismantled - it is fastened with screws, if you unscrew them, then it can be easily removed. Under it are the burners, supplying wires to them and mechanical temperature regulators, which are located on the front panel.
All this must be dismantled in order to get to the lower part, where the heating elements of the oven are located.
At a modern electric hob with a hob made of glass ceramics disassembling the case for repair will be different - in order to get inside, you just need to remove the top panel.
Important! Repair of glass-ceramic hobs is carried out only by specialists of the service center - amateurs with superficial knowledge and lack of experience should not touch such complex equipment.
Below are the common breakdowns of electric cookers. Some of them can be fixed by yourself, others require professional diagnostics and repair.
If you have a stove with burners, then in order to change them, you need to act according to this method.
We unscrew the nut and remove the grounding.
There may be a ring or bracket under it that presses the part to the base.
The burner is fastened with a threaded connection or simply inserted into a special hole. In the first case, we lubricate the thread with oil and carefully try to unscrew it from the case, in the second case, we pry it with a screwdriver and take it out.
If the model is of the old model, then it is better to immediately replace the burned-out burners with modern and economical models that are suitable in size.
If the burners are in good working order, then the reason for the failure lies in control unit - a large current flows through the mechanical regulators, and carbon deposits can form on delicate contacts, which are cleaned with fine sandpaper.
Here's a step-by-step guide on how to repair or replace a switch on an electric cooker.
If there are no clicks when turning the regulator, this indicates that it is defective.
There is an original check of its condition: we put the regulator in the middle position, apply voltage to the stove, the automatic protection should work - turn on and off after 30 seconds.
Before removing the handles, you must study the instructions - on some models they do not understand (Gefest, Kaiser).
First, the control knobs are removed from the outside, then we unscrew the front panel.
A bar is installed under it, which must be removed in order to get to the broken regulator.
If the click is inaudible when the relay is turned on, then it is necessary to check for the presence of a signal - if it is absent, the reason lies in the microprocessor itself or in the cascade at the output. To repair an electronic unit, you need to have a schematic diagram and understand the complexities of radio engineering ... If there is no knowledge and skills, then it is better to turn to specialists - otherwise you will have to buy a new electric stove.
Modern electric stoves on heating elements quite often use a cascade-type burner heating thermostat.
Sometimes there is a breakdown of such a regulator, for which an identical replacement can be found. Experienced masters advise to install triac type such a device, you just need to take it with a margin of power and current strength. In some models, it is installed on one board along with a heatsink. When the burner of the stove is operating at maximum, and the heating control cannot be changed, this indicates that it was the regulator that failed for an unknown reason - it urgently needs to be replaced.
Each user should understand that modern household appliances are crammed with electronics, each model has its own, different from others, nuance of manufacturing and control - mechanical or electronic. Outside interference without special knowledge and skills can negatively affect the delicate filling of electric stoves.
If you have a simple stove with burners on an enameled hob, then you can repair it on your own by watching the video:
VIDEO
In recent years, the central place in the kitchen is increasingly occupied by electric stoves, the range of which on the modern market is striking in its variety. The widespread use of this type of kitchen equipment is also facilitated by the fact that apartments in newly built houses (with more than 16 floors) are equipped with electric stoves such as "Lysva", "ZVI 417" and the like.In addition, the latest models of electric ovens, which use the latest advances in electronics (as in modern models of Hansa, Whirlpool, etc.), also attract potential consumers with their increased functionality.
Despite the great variety, all electric cookers can be divided into groups, guided by such interdependent criteria as the type of burners used and the material from which the hob is made. .
Modern electric stoves are equipped with built-in heaters (burners) of various types. The standard quantity is 4 elements, but in some models 6 heaters can also be found. The exception is some budget models in which 2 burners are installed.
The industry produces such types of burners :
tubular (heating element);
rapid (spiral);
halogen (Halo-Light);
tape (Hi-Light);
induction.
Usually, Heating elements closed with cast-iron "pancakes", but can be operated without them (table electric stove "Dream 010H Elna", etc.). Rapid heaters are used to organize the so-called expansion zones on modern hobs. In the electric stoves of the past years of release, nichrome spirals were hidden inside cast-iron "pancakes" or placed on an open ceramic base (rare electric table-type stoves).
Important! Halogen, tape and induction types of heaters can be called burners only conditionally, since their elements are structurally disconnected, and the zones in which it is necessary to install dishes are visually shown on the hobs of electric stoves.
In the manufacture of hobs for domestic and foreign electric stoves, the following are used:
alloy steel, on which a strong anti-corrosion enamel is applied, which is highly resistant to high temperatures;
stainless steel;
glass ceramics.
Almost all household electric stoves, in addition to hobs with hobs, have ovens, which can be:
static , i.e. equipped with two heating elements (upper and lower), providing uniform heating of products from all sides;multifunctional , using the principle of convection for operation, while the uniform distribution of heated air throughout the entire volume of the oven is carried out by means of a fan.
An electric stove is a rather complex device, in which generally includes :
electric burners;
temperature sensor;
oven with heating elements (heating elements) and a fan;
control Panel;
terminal box;
power cord, etc.
Despite the high reliability of electric stoves, they, like all household appliances, can break from time to time. In cases where the electronic components that control the operation of the electric stove fail, only a person with deep knowledge in the field of electrical engineering and microelectronics will be able to repair them on their own ... In addition, he should have on hand a number of measuring instruments necessary for diagnostics and subsequent adjustment of these nodes.
However, simple malfunctions that often arise during the constant operation of the electric stove can be tried to be repaired by yourself. To do this, it is enough to have knowledge of safety requirements and the basics of electrical engineering, as well as have a set of simple tools .
When starting to repair an electric stove with your own hands, you need to prepare a multimeter, a set of Phillips and flat screwdrivers, pliers and nippers (side cutters). You will also need a shrink tubing with a mounting knife and fine-grained sandpaper. The most important thing is to get a voltage probe, a set of wrenches, a torch, tweezers, and a hammer.
Before starting the diagnostics, you must make sure that the malfunctions were not caused by violations of the rules for using the electric stove.Such breakdowns generally include:
lack of power supply voltage;
weakening or oxidation of contact connections;
breakage of the mode switch;
heater malfunctions;
breakage of electrical wiring, etc.
In any case, diagnostics and repair of electric stoves start by checking the presence of voltage in the outlet power supply network and visual inspection of the power cord. The voltage is checked using a multimeter or test light. Only after making sure that the outlet is in working order and the power cord has no external damage, you can start disassembling the electric stove.
Attention! To safely disassemble the appliance, you must first unplug the power plug.
Next, you need to remove the hob. Structurally, electric stoves differ from each other, however, the hob of many modern electric stoves (Gefest, Beko, etc.) secured with screws located in the corners of the case ... Having unscrewed them, the surface is gently lifted and shifted to the side. This will open access to the internal parts of the electric stove.
Advice! In order not to damage the hob, it must be disconnected from the body. To do this, remove all the wires coming from the burners and switches.
The next step is to check the presence of voltage at the contacts of the terminal box, where wires from almost all elements of the circuit are connected (burners, switches, etc.). Reaching her, measure each contact with a multimeter ... If voltage is present everywhere, then the troubleshooting continues. And if on some contact it is not (wire breakage, oxidation of terminals, etc.), then the defects are eliminated and only then (if necessary) continue to work.
Important! The voltage measurement at the terminals of the terminal box is carried out with the power cord connected to the network. In order to avoid serious injury due to accidental contact with live parts, it is recommended to carry out work in the presence of an assistant. His task will be during the procedure to be near the outlet and, if necessary, instantly de-energize the disassembled electric stove.
After such a check, you can immediately do some conclusions .
If there is voltage on at least one contact of the terminal box, then you do not need to check the power cord and outlet.
If there is no supply voltage in the contacts of the terminal box, then the malfunction should be looked for either in the mains plug or in the power cord. Broken wires or poor contact can also be the reason for the lack of voltage.
Next, they begin to search for faulty nodes installed inside the electric stove body.
Despite the schematic, technical and design differences between different types of electric stoves, breakdown troubleshooting process for all models of one nakov.
In electric stoves from different manufacturers, switches may be installed that differ in the principle of operation. There are samples with such power control:
stepped;
smooth;
smooth with the ability to turn on an additional heating zone.
The switch type determines the type of hotplate and vice versa. Thus, the step regulator provides for the presence of burners with several spirals, and the smooth switch can only work with burners with one spiral ... In this case, in the first case, the burner may fail partially (one of the spirals burns out), and in the second - completely.
Failed switches can only be restored if the cause of the malfunction is oxidation of the contacts or weakening of the contact connections ... Oxidized contacts are cleaned with sandpaper, and loose connections are repaired with pliers or a screwdriver. In all other cases (breakage of internal parts, deformation of bimetallic plates, etc.), the switch needs to be replaced.
Electric stove burners that look like cast-iron "pancakes" (Ariston, Electrolux, etc.) may stop working for the following reasons:
burned out one or more spirals;
faulty switches;
violation of contacts or breakage of connecting wires.
VIDEO
It is quite easy to repair broken wires and contact connections. As for the burners and heaters installed in ovens, they must be “ringed” with a multimeter. If the check shows the integrity of the spirals, then troubleshooting should be continued elsewhere. Otherwise, the hotplate will need to be replaced.
Important! Failed halogen lamps and inductors installed under glass-ceramic hobs of modern electric stoves (Gorenye, Indesit, etc.) are also subject to replacement.
Devices that control the heating temperature of the burners on the hob and heaters installed in ovens in electric stoves may fail. for two reasons :
oxidation and breakdown of contacts;
deformation or breakage of bimetallic plates.
If, after the restoration of reliable contact at the terminals, the performance of these nodes has not been restored, then they must be replaced.
If there is a suspicion that the electronic control module of the electric stove has failed, then you must immediately contact the service department, which has at its disposal qualified specialists and has the necessary spare parts. Repair the electronic module at home is almost impossible .
For each type of electric stove, there are characteristic malfunctions or malfunctions. In this case, they arise most often due to violation of the operating rules established by the manufacturer, as well as due to the natural wear and tear of critical parts. Such violations include:
the use of dishes, the bottom diameter of which does not correspond to the size of the heating zone (relevant for induction cookers and modern electric models);
switching on the burners without dishes installed on them;
using pots (pans, teapots) with a convex bottom;
careless handling of controls, etc.
Advice! Before starting diagnostic measures, you should make sure that the elementary operating recommendations are followed.
VIDEO
Long-term trouble-free operation of the electric oven is only possible with proper care and following all the recommendations set out in the operating instructions. So, after cooking wipe the stove with soapy water and wipe dry .
Important! Cleaning the glass surfaces of the electric stove should not be carried out with the use of abrasive cleaning agents.
A working electric stove should not be left unattended for a long time. to prevent accidental ignition of objects in the immediate vicinity. This point is especially important for families with a small child if the cooker model is not equipped with a childproof function.
Possible breakdowns can be prevented in time when carrying out annual maintenance electric stoves. At the same time, the wizard will check the safety of the equipment and eliminate the shortcomings that pose a threat to the user. If the malfunctions are too serious, the service technician will write a prescription for the need for repair.
Video (click to play).
VIDEO 
