In detail: ironing machine Kalinka DIY repair from a real master for the site my.housecope.com.
Modern ironing machines simplify the ironing process and allow you to achieve perfect ironing results without much effort. Equipment of this type has a long service life, however, it is not insured against various kinds of breakdowns. Common causes of malfunctions include:
- non-observance of operating rules;
- manufacturing defect;
- sudden voltage drops.
 |
Video (click to play). |
Self-repair of the ironing machine can lead to the need for expensive restoration of damaged parts, therefore, in the event of a breakdown, you should immediately contact a specialized workshop. LEON GROUP employees are highly qualified and experienced, guaranteeing prompt and high-quality troubleshooting. Careful examination and diagnostics on computer equipment allow you to identify the true causes of the breakdown, eliminating the likelihood of a repeated call to the master.
The specialists of our company carry out repair of various types of faults, including such as:
- Failure of the steam generator. A breakdown is characterized by insufficient steam temperature or its absence due to a violation of the tightness of the device.
- Malfunctions in the electrical system. Among the signs of a breakdown, one can note the incorrect operation of the control system, the inability to select the ironing mode, etc.
- Failure of buttons, damaged cords and other defects. A breakdown is characterized by the impossibility of turning on the ironing machine, as well as uneven heating or lack of steam.
Ironing machine repairs are guaranteed for up to three years. To clarify the information of interest, as well as consult with a specialist, just call us at 8 (499) 653-60-14.
In household ironing machines, a tubular electric heater - TEN (GOST 13268-83E) or a flat heater based on composite resistive materials can be used as a heater. The heating element is a metal tube with a heating element mounted inside in the form of a conductive spiral, pressed in a special filler — fused magnesium oxide (pereclase), quartz sand or corundum. Heating elements are of any shape. They are characterized by high power density, withstand heavy loads and are relatively easy to manufacture. However, they have a significant drawback:
Their safety is ensured only if the outer tube is grounded, that is, they can be used only in class I devices [GOST 14087-70 (ST SEV 1110-78)]. Therefore, it becomes necessary to use additional insulation in devices, which is not always possible. Recently, in the design of household appliances, flat heaters in the form of sprayed conductors made of foil materials, as well as fabric elements, are increasingly used. These heating elements use special alloys as a conductive medium. The most famous alloys are nickel-chromium alloys (nichrome) and alloys of chromium, nickel and iron (ferronichromes): for example, nichrome Kh20HVO (operating at a temperature of 1050-1100 ° C), ferrochrome Kh15N60 (operating at a temperature of 950-1000 ° C and having a specific resistance 1.0 - 1.2 Ohm-mm2 / m).
When designing household ironing machines, choosing heating elements must take into account the following requirements:
1) the conductive material must be thermally stable to temperatures of 1000-1100 ° C, have a high resistivity, a low temperature coefficient of electrical resistance;
2) the conductive material should be as close as possible to the inner side of the metal sole of the shoe;
3) the thermal conductivity of the electrically insulating layer between the sole of the ironing shoe and the conductive material must be high;
4) there must be adequate thermal insulation between the conductive material and the protective casing of the shoe;
5) after exposure in an environment with a humidity of 95%. within 48 hours [devices of class II insulation in accordance with GOST 14087-80 (ST SEV 1110-78)] electrical insulation must withstand without breakdown and surface discharge for 1 minute the voltage of 3750 V with a frequency of 50 Hz.
The above requirements are most fully met by sprayed or foil heaters.
Rice. 3.37. Influence of heating element materials and thermal insulation on ironing shoe performance:
A - power consumption; 6 - casing temperature; / - heating element; 2 - wire; 3 - foil; 4 - asbestos (4 mm); 5 - basalt cardboard 5 mm thick; 6 - basalt cardboard 10 mm thick; 7 - basalt cardboard 15 mm thick
Parametric ironing machines with basalt cardboard as thermal insulation consume about 40% less energy compared to the first models of Kalinka machines. This is due to the lower thermal conductivity of basalt cardboard, as a result of which, when ironing at 200 ° C, the surface temperature of the protective casing is 78 ° C (at a temperature of 180 ° C for the Kalinka machine); lower (by 150-200 ° C) operating temperature of heating elements; shorter time to reach the mode (by 1.5-2 min).
As thermal insulation for spraying conductive materials, aluminum oxide can be used, followed by five-fold impregnation with silicon oxide. The electrical strength of these samples after exposure to moisture is 1400-1500 V, which allows the use of sprayed heaters in machines and devices of class I insulation.
It is also possible to use organosilicate coatings with a thickness of 0.2-0.3 mm. The requirements for reinforced insulation (test voltage 3750 V) are maintained by the coatings OS-92-04 (4500 V) and OS-92-02 (4000 V). However, it should be remembered that for heaters with silicon and organosilicate coatings, additional electrical insulation of 1250 V is required. For this, mica plastics can be recommended, which have the required electrical properties, reliability and manufacturability.
When testing ironing machines, it is necessary to use conductive thermocouples with a diameter of not more than 0.3 mm, which are soldered to the center of a copper disk with a diameter of 10 ± 0.5 mm and a thickness of not more than 1 mm. During the measurement process, it is necessary to ensure reliable contact between the surface and the disc. Test methods for ironing machines are set out in OST 27-560-190-81.
Recommendations for calculating the working bodies and the roll rotation frequency are given in the works of IV Orlov and VA Dubovny, as well as in [28].
Replacement of faulty assemblies and parts and elimination of Major malfunctions is carried out in accordance with the instructions for repair of ironing machines. When assembling machines, special attention must be paid to the connection of the input ends of the electric motors, since an incorrect connection can lead to burnout of the windings. After repairing the finisher, check it in the following order:
1) measure the insulation resistance in a cold state between current-carrying units and the machine body;
3.16. List of possible malfunctions of ironing machines and how to fix them
There are different fabrics: comfortable cotton, elegant linen, practical synthetics and soft knitwear. Some require daily ironing, others need it periodically, mainly after washing. Each house has its own preferences regarding materials for clothes and linen, however, no decent housewife can afford to completely abandon ironing.
The advent of washing machines has almost completely solved the problem of washing, which used to take so much time and effort. But no matter how modern your “washing machine” is, the problem of ironing remains as urgent as it was many years ago. For the convenience of housewives, more and more models of irons are coming up, increasing their work surface, equipping them with steam supply systems. However, ironing bed linen, and especially one designed for a huge Euro bed, is still one of the most unpleasant activities that take up a lot of free time.
Now imagine that you have the opportunity to quickly, easily and safely iron a huge stack of linen without using the services of a laundry or a visiting housekeeper. Dream? Not at all. All this became quite real with the advent of household ironing machines.
The first stationary ironing system was developed in Belgium in the middle of the 18th century. For a long time it was successfully used in its original form, and then it was replaced by a machine equipped with a large-diameter roll and a steam-heated chute. Since then, ironing machines have developed and improved: models were produced with various methods of heating the working surface - from steam and oil to electric. There was a variant of heating and hot water used in Australia, but it was not widely used outside the country. And if earlier ironing machines were used only as equipment for large laundries, now their foldable "great-great-granddaughters" are slowly but surely entering modern houses and apartments.
Ironing machine types
In terms of appearance and purpose, ironing machines, and to be more precise, ironing and drying machines are divided into roller ironing machines for straight linen (sheets, duvet covers, tablecloths, etc.) and "mannequins" designed for steaming blouses, shirts, jackets, sweaters and even jackets.
Roller ironing machines for straight linen
Machines for straight linen evolved directly from the old ironing units, and their principle of operation differs little from the models of the past or the century before last: the linen is passed between the roller and the concave surface, which once replaced the straight tray. But that's where the similarities end. Modern ironing machines are designed in such a way that the ironing process turns from hard work into a simple and even enjoyable experience that does not cause any problems.
For example, Miele, one of the leading home appliance manufacturers, has been improving its ironing machines for almost a hundred years. Unlike the first, released in 1913, which works without heating and is operated by hand, the latest models of the company are thought out to the smallest detail.
First of all, Miele ironers can be folded up.In this state, they occupy only 0.25 m2. Secondly, due to the presence of wheels, moving the unit from place to place will not be difficult for women and their growing up assistants and assistants. Yes, even children can not only move this car, but also use it - it is so simple and convenient!
The conversation about children did not come up by accident. The fact is that in modern ironing machines, special attention is paid to safety. The unique finger guard reacts to touch and immediately shuts off the motor in case of danger. We can say that it is almost impossible to accidentally burn yourself while ironing.
Moreover, the machine is really comfortable to use. The free edge of the roller allows you to iron not only "wide-format" linen, but also skirts, shirts, blouses. On the control panel of the ironing machine there is a roller rotation speed regulator, which allows you to select the operating mode depending on the moisture content of the laundry: the higher it is, the more time it takes to dry, and, therefore, the slower the roller should rotate. Nearby there is a button on / off the machine and a temperature indicator. An important advantage of the Miele ironing equipment is the possibility of emergency unlocking in the event of an unexpected power outage, that is, the laundry caught on the pressure roller can be easily released and removed from the machine.
The well-thought-out arrangement of the heating elements ensures efficient ironing, and the possibility of steaming helps to cope even with overdried fabrics.
"Mannequins"
Ironing and drying machine - "mannequin" is designed for drying, steaming and ironing outerwear. Like roller machines for straight linen, it is equipped with wheels, and thanks to the convenient retractable handle, it is quite easy to move it around the room. Several time and temperature programs allow you to iron clothes made of different materials, dry slightly damp clothes or refresh them with cold air. The mannequin ironer is designed for sizes XS to 4XL for shirts and jackets and S to XXL for ladies' blouses.
What to choose
What type of ironing machine to buy for everyday use is up to consumers of household appliances: roller models are more versatile, "mannequins" are convenient, but the bulk of the washed linen - sheets, duvet covers, tablecloths - will have to be ironed with an iron. Those who are able to purchase both models at once solve a number of problems that inevitably arise after washing and drying.
An ironing machine in the house is not at all a luxury, as it might seem at first glance. It is a handy helper along with washing and dishwashing appliances. With ironing equipment, you can iron your clothes much faster than by hand with an iron, and free time from household chores is never superfluous.
The online store "Chisto Doma" sells the ironing rink of the domestic manufacturer "Kalinka". So that ironing does not seem like a tedious job, from which your hands and back will ache, buy an inexpensive Kalinka ironing rink at Chisto Doma. It saves time and makes ironing easier. In order to install it does not require a lot of space. It weighs 18 kg, its overall dimensions
• Length - 785 mm,
• Depth - 300 mm,
• Height 250 mm
All that is needed is to lay the product between the shaft and the heated plate.
Large size laundry can be folded into 4, 6 or even 8 layers. But then, for a better ironing result, we recommend that you use a mechanical spray and slightly moisten the laundry with water. And iron the folded product on both sides. The gross ironing machine "Kalinka" can easily cope with large sheets, duvet covers, pillowcases, tablecloths and curtains, bath and kitchen towels. If you get the hang of it, YOU can quickly iron complex wardrobe items with Kalinka.Trousers and skirts of all types and sizes, shirts and underwear.
The electrical household machine "Kalinka" is intended for ironing linen and things made of various fabrics: nylon, silk, synthetics, wool, mixed fabrics, cotton, flax and others, in their properties close to those indicated. The ironing process at "Kalinka" almost completely removes the physical stress from a person, increases labor productivity, in comparison with ironing.
The Internet shop "Chisto Doma" invites you to familiarize yourself with the user's manual before turning on the device. It will help you to use this device correctly and efficiently.
The simplicity of operating the Kalinka ironing machine and the almost complete absence of the necessary maintenance or service makes it an understandable and accessible assistant in every family, as well as in small industries with an ironing mode of no more than 4 hours a day.
Attention!
• During the first heating cycle of the iron mold, there is a short-term increase in temperature relative to the recommended temperature, this is due to the heating of the system. To avoid thermal damage to the fabric, start ironing only after turning off the signal lamp no. 10 again. This is important when ironing delicate fabrics at a low recommended ironing temperature.
• Do not damage the pedal cable, avoid sharp bends of the cable sheath!
• After 4 hours of ironing, be sure to turn off the machine for 1 hour and let it cool down!
• After finishing work with the ironing machine, we recommend turning the thermostat to the minimum position (extreme left) until it stops. Also, when the machine is not in use, disconnect it from the power supply by unplugging the power plug.
Safety and fire safety requirement
1. Connect the ironing machine only to the AC power supply with a voltage of 220V with a current consumption of at least 6 amperes.
Connecting the ironing machine to the network is allowed only after it has been installed in the working position.
1) The casing inside which the heating elements are located, and the iron-trough, the thermostat is located outside.
2) Ironing roll with soft heat-resistant winding. The motor and gearbox are located inside the shaft.
3) Stand - the base inside is a lever system for pressing the trough to the shaft and a sensor for turning on the engine.
4) The main headstock of the gearbox, on which the control panel is located.
5) Pedal with a cable for pressing the trough to the shaft and turning on the shaft rotation.
6) Thermostat switch, on which the symbols for the degree of heating are applied.
7) Safety guard to protect fingers from scalding.
8) Button - Shaft rotation switch.
9) Signal lamp - power supply connections.
10) Signal lamp - on reaching the set ironing temperature and readiness for work.
11) Power cord with plug.
The Kalinka ironing rink is an ideal solution for ironing large volumes of products in small hotels and hotels, boarding houses, mini-laundries, spas and saunas. For apartments and houses where a lot of linen is ironed. And thanks to its safe design, it is suitable for kindergartens.
And one more important point! With the roller motor turned off, you can use the machine as an ironing press (to form folds, arrows on trousers, etc.).
Electric ironing machines
Ironing machines are designed for ironing linen, tablecloths, curtains and other types of straight linen.
Time of shoe warming up to a temperature of 200 "С, min. Ironing speed, m / min. Overall dimensions, mm. Length of roller, mm. Diameter of roller, mm. Weight, kg.
Maintenance. The factory lubrication of the plain bearings of the electric motor ensures the correct operation of the machine during the warranty period.
After the warranty period, the motor bearings must be lubricated.Subsequently, lubrication is carried out every 150 hours of operating time, but at least once a year.
To lubricate the bearings, it is necessary: on the left side of the roller 3 (see Fig. 25, a), untie the cords of the upper pillowcase, remove the protective grille and unscrew the screw inside the roller. Remove roller S by sliding it to the left side of the headstock 5, thus providing free access to the electric motor. Through the holes in the upper part of the supports, with the help of an oiler, saturate the bearing seals with industrial oil of the I-8A brand or with MP-704 oil (5-10 drops). Wipe off excess oil on the engine with a napkin. Assemble the machine in reverse order.
Clamping mechanism adjustment. During the operation of the machine, the rolling of the soft winding of the roller 3 occurs, which leads to a decrease in the pressing force of the shoe 2. Through the window of the bottom of the machine, using wrenches 8X 10 or 10X 12 mm, holding the screw with a wrench, loosen the two nuts of the adjusting unit and, screwing in the adjusting screw, make adjustments, ensuring the gap between the roller and the shoe (with the pedal pressed) of 1.5— 2.5 mm. Check the gap with a feeler gauge through the hole in the bottom of the machine. After adjusting the ganks, counter.
Everyone should do their own thing, since modern household appliances do not tolerate the illiterate intervention of an amateur. However, some problems that have arisen in the operation of household appliances often do not require a call from a specialist and are resolved on the spot on their own. If you are not sure what to call the master or if you have any questions about the expediency of repair, then you can ask your question on our forum for the repair of household appliances.
Most likely, on our forum you will find answers to all questions about the repair of both large and small household appliances, but if you want to ask a question, you will need to register on the forum, which will take no more than two minutes.
In every house, in the kitchen, in the bathroom, in the room ... there is a place for small household appliances. We can no longer imagine our life without our little helpers, for example, such as: ironing machine "KALINKA", ironing presses, microwave ovens microwave ovens, electric kettles, hair dryers, water heaters, oil heaters, vacuum cleaners, irons, meat grinders, samovars ( repair, tinning), sewing machines, electric shavers, electric stoves and so on.
In the kitchen, you can no longer do without a microwave oven or an electric kettle, and an electric meat grinder is also an integral assistant to the hostess. No woman can imagine her life without a hair dryer, and more than 50% of men use electric shavers. How can you clean a room without a vacuum cleaner or iron the laundry without an iron. And how nice it is to turn on the oil heater and warm up the room on a cold autumn evening, when the heating is not turned on yet. Therefore, our workshop will make sure that your little assistants are always by your side and in working order.
We are always happy to help you solve your problems related to the repair of equipment, which is so necessary for us in everyday life. Visit our Home Appliance Repair Forum to hopefully find answers to your questions.
Unlike the “Romashka” ironing machine, which is a one-piece construction of the same type as the “Kalinka M” ironing machine with a pedal, the “Kalinka” ironing machine is installed on the table for a convenient and fast ironing process. The machine has a foot pedal, which provides the necessary pressing force of the "shoe" to the roller, as well as turning on and off the roller rotation electric motor. This pedal is connected via a special cable, and you can easily control the entire machine with your foot in the process. This ironing machine is equipped with a thermostat that allows you to set the desired temperature for ironing various fabrics.With the roller motor turned off, the machine can be used as an ironing press (for creating folds, arrows on trousers, etc.). Ironing on the "Kalinka M" skating rink almost completely removes physical stress from a person, increases productivity in comparison with a simple method of ironing. Having gained experience of working with the Kalinka M ironing machine, you will be convinced of its very wide capabilities and will be able to successfully carry out all ironing operations. Simplicity of control of the Kalinka M machine, no need for technical maintenance during operation.
There are three modifications of the ironing machine:
Specifications
Household ironing apparatus "Kalinka" has dimensions (in mm) 820X300X240
Length of the working part of the roller and "shoe" 550 mm
net weight 18 kg
Power consumption of the electric heater 1200 W
Electric motor power - 50 W
The maximum heating temperature of the “sole” of the iron is up to 225 ° C.
NEW PRICE: 14500 rub
Specifications
Household ironing apparatus "Kalinka" has dimensions (in mm) 800X300X240
Length of the working part of the roller and "shoe" 550 mm
net weight 18 kg
Power consumption of the electric heater 1200 W
Electric motor power - 50 W
The maximum heating temperature of the “sole” of the iron is up to 225 ° C.
Do you iron yourself or do you want to make it easier for the housekeeper?
If anything, I have an ironing press lying on the mezzanine, but there was also a Kalinka ironing machine. It is good to weld the thermal photographs onto the T-shirts with a press. And Kalinka failed once. One girl put her blouse in there, and it got burned when it got jammed. The girl cried a lot with girlish tears, she had to give her new clothes. ))
This home ironing system will save you time and energy! Thanks to the high pressure, the steam penetrates deep into the fibers of the fabric, smoothing it easily the first time. The steam is so strong that you can smooth multiple layers at once!
The removable boiler facilitates maintenance operations.
The blowing function allows delicate items to be lifted up for ironing only with steam. Pull-in locks the fabric to the surface to prevent wrinkling. Heating allows the fabric to dry.
Steam iron with cork handle, aluminum coated soleplate, steam adjustment up to 75g / min. Patented safety cover. Boiler - Extra ALP alloy.
* The heated surface of the ironing board up to 90 degrees, allows you to dry your laundry. The fabric is heated from both sides, from the bottom of the board and from the top of the iron, which provides a double-effect ironing.
* The suction function allows you to remove excess steam and keeps the fabric on the board surface.
* The blowing function allows you to iron delicate fabrics on an air cushion, which prevents heat-sensitive fabrics from overheating.
* Height adjustment has 8 positions from 80 cm to 102 cm.
Having found myself a hostage of the recreation center for the whole summer, I simply could not avoid getting acquainted with the "Romashka-2" ironing machine, which is used here almost every day for ironing bed linen.
Regarding the control: “Chamomile” has a pedal, two switches and two regulators, which I did not really understand, because I was told to work in one mode (which was already set) and not touch anything. One switch is on / off, the second is incomprehensible. One regulator - temperature, the second - it seems, according to the type of linen. The “Chamomile” has a foot pedal, like a foot sewing machine.
How to work:
1) I plug the plug into the socket;
2) turn on both switches to the “on” mode;
3) I press the foot pedal and wait for the spinning roller to warm up properly;
4) release the pedal and stop the roller;
5) I put the double-folded sheet on the roller and press the pedal, with my hands I straighten the folds and “wrinkles”;
6) turn the sheet over and iron the other side;
7) fold the sheet in half again (i.e.already four times) and also repeat the process on both sides;
8) I take out the ironed sheet and put it on a pile of the same - that's all!
Conclusion:
- it is very simple to operate “Camomile-2” (even a teenager can handle it - we checked it 🙂);
- the laundry comes out of the machine hot (and this is an additional disinfection by heat treatment) and perfectly even.
Of course, you cannot start such a machine at home - it is extremely inconvenient in everyday life, since it takes up a lot of space (approximately 100x30cm). In addition, I see no reason to spend 4000 UAH. (which is exactly how much it costs) for a couple of sets of underwear per month. But for recreation centers and hotel-type establishments, where the cycle of linen is simply colossal, it is the most it.
Household ironing machine "Kalinka M"- a household ironing rink designed for ironing linen and things made of various fabrics of nylon, silk, wool, cotton, flax and others, in their physical properties close to those indicated. Ironing is carried out by pulling the product between the rotating roller and the heated "shoe" (iron) of the ironing machine pressed against it. Unlike the “Romashka” ironing machine, which is a one-piece construction of the same type as the “Kalinka M” ironing machine with a pedal, the “Kalinka” ironing machine is installed on the table for a convenient and fast ironing process.
- Household ironing rink "Kalinka" has dimensions (in mm) 780X300X240
- Length of the working part of the roller and "shoe" 550 mm
- net weight 18 kg
- Power consumption of the electric heater 1200 W
- Electric motor power - 50 W
- The maximum heating temperature of the “sole” of the iron is up to 225 ° C.
The machine has a foot pedal, which provides the necessary pressing force of the "shoe" to the roller, as well as turning on and off the roller rotation electric motor. This pedal is connected via a special cable, and you can easily control the entire machine with your foot in the process.
This ironing machine is equipped with a thermostat that allows you to set the desired temperature for ironing various fabrics. With the roller motor turned off, the machine can be used as an ironing press (for creating folds, arrows on trousers, etc.).
Ironing on the "Kalinka M" skating rink almost completely removes physical stress from a person, increases productivity in comparison with a simple method of ironing. Having gained experience of working with the Kalinka M ironing machine, you will be convinced of its very wide capabilities and will be able to successfully carry out all ironing operations. Simplicity of control of the Kalinka M machine, no need for technical maintenance during operation.
Sevastopol
Stakhanovtsev 9,
Car market "Hammer"
Dear Sirs! We offer quality and time-tested KALINKA ironing machine. Household ironing machine KALINKA-M. Household ironing rink "Kalinka M" is intended for ironing linen and things made of various fabrics of nylon, silk, wool, cotton, flax and others, in their physical properties close to those indicated. Ironing is carried out by pulling the product between the rotating roller and the heated "shoe" (iron) of the ironing machine pressed against it.
Stock availability: there is
- MACHINE NEW IN PACKAGING WITH 12 MONTHS WARRANTY
- Household ironing apparatus "Kalinka" has dimensions (in mm) 780X300X240
- Length of the working part of the roller and "shoe" 550 mm
- net weight 18 kg
- Power consumption of the electric heater 1200 W
- Electric motor power - 50 W
- The maximum heating temperature of the “sole” of the iron is up to 225 ° C.
Household ironing machine "Kalinka M" for home and mini laundries Dear Sirs!
Household ironing machine “Kalinka M” - household ironing rink “Kalinka M” is intended for ironing linen and things made of various fabrics of nylon, silk, wool, cotton, flax and others, which are close to those indicated in their physical properties.Ironing is carried out by pulling the product between the rotating roller and the heated "shoe" (iron) of the ironing machine pressed against it. Unlike the “Romashka” ironing machine, which is a one-piece construction of the same type as the “Kalinka M” ironing machine with a pedal, the “Kalinka” ironing machine is installed on the table for a convenient and fast ironing process.
The machine has a foot pedal, which provides the necessary pressing force of the "shoe" to the roller, as well as turning on and off the roller rotation electric motor. This pedal is connected via a special cable, and you can easily control the entire machine with your foot in the process.
This ironing machine is equipped with a thermostat that allows you to set the desired temperature for ironing various fabrics. With the roller motor turned off, the machine can be used as an ironing press (for creating folds, arrows on trousers, etc.).
Ironing on the "Kalinka M" skating rink almost completely removes physical stress from a person, increases productivity in comparison with a simple method of ironing. Having gained experience of working with the Kalinka M ironing machine, you will be convinced of its very wide capabilities and will be able to successfully carry out all ironing operations. Simplicity of control of the Kalinka M machine, no need for technical maintenance during operation.
Electric ironing machines
Ironing machines (table 3.7) are designed for ironing linen, tablecloths, curtains and other types of straight linen.
Maintenance. To lubricate the bearings, it is necessary: on the left side of the roller 3 (see Fig. 3.4, a), untie the cords of the upper pillowcase, remove the protective grille and unscrew the screw inside the roller. Remove the roller 3, sliding it to the left side of the headstock 5, thus providing free access to the electric motor. Through the holes in the upper part of the supports, with the help of an oiler, saturate the bearing seals with industrial oil of the I-8A brand or with MP-704 oil (5.10 drops). Wipe off excess oil on the engine with a napkin. Assemble the machine in reverse order.
Clamping mechanism adjustment. During the operation of the machine, the soft winding of the roller 3 is rolled in, which leads to a decrease in the pressing force of the shoe 2. To maintain the force, it is necessary to set the machine on its side on the table, placing a soft object under the limb 10, lower the pedal 9 to the floor. Through the window of the bottom of the machine, using wrenches 8 × 10 or 10 × 12 mm, holding the screw with a wrench, loosen the two nuts of the adjusting unit and, screwing in the adjusting screw, make the adjustment, ensuring the gap between the roller and the shoe (when the pedal is depressed) is 1, 5. 2.5 mm. Check the gap of the probes through the hole in the bottom of the machine. After adjustment, the nuts must be locked.
MOULINEX manufactures the Steam Center 70 Mario, a Jet Steam 70 iron with a Rotary Sistem.
Main technical characteristics of the center
Adjustable steam supply - from 0 to 70 g / min;
Steam control button;
Vertical steaming mode;
Stainless steel tank;
Indicator light for lack of water in the tank;
Thermostat with Soft Touch control;
Battery life - 90 min;
Stainless steel outsole;
Locking button for turning on steam.
Pages 1
You must login or register to post a response.
- SergGorelikov
- Jedi Knight
- Where: morons come from?
- Registration: 14-01-2013
- Posts: 1,046
New
power-1300W, drum length 600mm, diameter 140.
Foot drive. Operating mode 4/1 h.
4 hours of work, 1 hour break.
PRINCIPLE OF OPERATION:
Powered by email networks. The principle of operation is simple:
• the drum is rotating,
• an item is placed on the drum,
• pressed from above with a metal bar, heated (iron),
• the drum turns by rolling the thing under the plate
- WE RECEIVE A CAREFULLY IRONED THING.
Turning on the drum rotation and pressing the heated plate
performed using a special pedal.
How to work on the ironing machine:
1.on to the network;
2. set the required heating temperature (there is a regulator on the back of the heating rail, like an iron);
3. put the linen on the drum after having straightened it;
4. Press the pedal with your foot, as a result of which, the tire mirror is pressed against the drum, and the drum begins to rotate, rolling the laundry.
The drum rotation speed is low and therefore you can straighten and straighten the laundry with both hands on the go.
A handy piece for ironing bed linen. Ideal for large families, private kindergartens.
The car is a must if you have small children. It is very convenient to iron diapers, bed linen, etc. 
(this is only greenI'll give it back for 2000 rubles.
Congratulations. you say so many words, great. we have a problem with that. He understands everything, he knows, but only says: mom, dad, everything else is tata (
at the expense of the ironing board to the point, we also skated at one time, now I have forgotten, tk. on the street on a children's playground she rides.
with a pot straight in general trouble. At one time it was, as soon as you put it down, it immediately squeaks, now it runs away and of course everything is in your pants, and so in damp pants you can walk - in general, he doesn't care.
|
Video (click to play). |
very pretty boy) the young boy already knows so much
