Hotpoint ariston arsf 125 DIY repair

Details: hotpoint ariston arsf 125 DIY repair from a real master for the site my.housecope.com.

Washing machine Hotpoint Ariston of the Italian manufacturer is reliable and of high quality. But some parts of the washing machine sometimes become unusable.

You can, of course, send it to a service center for repair, but in order to save money and with skillful hands and a smart head, you can independently repair an electromechanical household appliance.

Do-it-yourself repair of the Ariston washing machine is easy to do. Follow our instructions for restoring the washing machine, and your assistant will serve you for many years.

In the Ariston electromechanical device, the main reason for the incorrect operation of the machine is blockages.
In addition, the heating element becomes unusable due to the appearance of limescale on the heating element due to hard water.
The pump can also be faulty due to its long operation.
Sometimes the filler valve fails due to damage to the rubber gasket.
In rare cases, bearings and seals have to be changed.
Electronics almost never breaks down, but we will still touch on the issue of replacing the control unit a little.

It is easy to remove the blockage with your own hands. You need to check the drain filter, which is located on the lower right under the panel.

After cleaning the filter, you will eliminate the cause of the malfunction of the washing machine. Less commonly, the drain pipe is clogged because it is thick.

There may be a blockage in the pump, but rarely, because there is an additional filter in front of it.

The drain hose will only become clogged if you have not installed it correctly.

Check the drain, there may be a blockage in it too. Disassemble the unit, pull out the branch pipe by loosening the clamps, flush it. Pull out the pump by unscrewing the fasteners and disconnecting the sensors.

Signs of a pump breakdown:

Video (click to play).

The drain pump hums, but the water does not drain.
The machine may stop when the system is running.
Water flows out slowly.

Repair of the pump of the Ariston washing machine must be done as follows:

If the filler valve is broken in Ariston, then water constantly flows into the washer, even when it is not working, it is disconnected from the network.

To check the filler valve, you need to unscrew the fasteners and remove the top cover. The valve is located where the drain hose connects to the body of the electromechanical unit.

Check the gaskets first. If they have not lost their performance, measure the resistance of the valve. Put the probes on the contacts of the filler valve and check the resistance, whether it is optimal (from 30 to 50 ohms).

If it is less or more than the set value, it means that the water intake valve is not working. To replace it, you need to unscrew the old valve from the body and screw in a new one. Be sure to connect the sensors.

If the heating element is faulty, then it is imperative to replace it. Its breakdown is indicated by the fact that the water does not heat up or washing in all programs takes place in cold water. Sometimes the machine gives an error and stops.

To replace the heating element, the rear wall must be removed. There are two contacts under the tank with a fastener in the middle. This is ten. Measure the resistance of the heating element with a multimeter.

If the resistance is within the normal range, then there is no need to change the heating element - it is serviceable. To remove the heating element, you need to unscrew the screw in the middle and pull it towards you with swinging movements.

The water may not heat up also due to the fragile connection of the wires to the heating element, which arises from the strong vibration of the washing machine. Water heating may also be absent if the temperature sensor is faulty.

Take a tester or multimeter and check the resistance of the sensor when cold and hot.If the resistance is the same, then it is broken, requires replacement. The resistance should be different.

The high-quality and durable material from which the drum of household appliances is made also becomes unusable, because solid foreign objects get into it, which can damage the unit, forming cracks on it.

The plastic rib inside the drum can deform. Remove the drum to replace it.

To remove the drum yourself, you need the following set of tools:

a set of screwdrivers, especially a Phillips screwdriver and a slotted nozzle are needed;
screwdriver;
pliers;
hammer;
hexagons of different sizes.

Use a Phillips screwdriver to remove the bolts from the back, front, and top walls, and then remove the panels themselves.

Dismantle the powder container. Use a slotted screwdriver to remove the module. It is not necessary to unscrew the control unit to the end, the main thing is that it does not interfere with the removal of the drum.

Remove the hatch cuff, pull out the lower bar by unscrewing the screws. It is necessary to dismantle electronics, shock absorbers and other parts from the loading tank.

Remove the drum from the device and disassemble it. Remove the screws holding the two sides of the drum. Pry the oil seals with a screwdriver and remove them.

The bearing in the drum can break and wear. It needs to be replaced. You only need to buy a bearing of the corresponding brand in a specialized store or order it on the official website of the Ariston washing machine, possibly purchase it in an equipment repair workshop.

Use a metal rod and a hammer to knock out the bearings. If they are defective, replace them. If the drum is deformed, replace it with a new one.

Reassemble. If the malfunction is in the plastic rib, then you do not need to disassemble the tank. The washer door is removed. A metal rod is taken, the diameter of which is smaller than the holes in the plastic rib of the drum.

The rod is inserted into one of the holes on the rib, the latch is opened with it, the plastic part is removed. A new plastic rib is put in its place. Slide along the groove with the plastic rib until the latch enters the hole and closes.

The LED indicators on the control panel receive a signal from the faulty unit. An error code is reflected on the display, indicating a breakdown of some element.

In the Ariston Margarita 2000 washing machine, in case of a malfunction, the power button starts blinking and the handle of the command device is constantly turning. The flashing pattern is different depending on the fault. The codes can be found in the instructions for the machine.

The control unit may fail due to mechanical damage, water ingress on it. Do-it-yourself repair of the control module can be done on your own only when a small part has failed or you need to replace the board completely.

In other cases, contact the service. Professionals will help you repair, rewire complex electronic circuits.

It is necessary to unscrew the screws on the board or remove the plates with a wrench, depending on its brand. Remove the control unit by replacing it with a new one. Screw in the fasteners carefully so as not to damage any part.

The price of the repair depends on its complexity. If the device does not drain the water, then the cost of restoration work ranges from 1200 to 3000 rubles.

Repair of the control module costs more than 3,500 rubles. The rattle and clatter of a typewriter can be corrected at a service center in Moscow for a price of 3,000 to 5,000 rubles.

Today we have shared with you our knowledge on how to repair the Ariston washing machine with our own hands.

We hope that you will succeed and self-repair will cost you inexpensively, you will not have to pay for disassembling and assembling washing equipment, for restoration work with the help of specialists.

Models of Hotpoint and Margarita washing machines from the Italian manufacturer Ariston are rightfully considered one of the most reliable, ergonomic and high-quality among numerous competitors.However, even with them, unforeseen failures sometimes occur, which can be easily eliminated with your own hands.

Before you start repairing the machine, you first need to figure out which malfunctions most often lead to a malfunction of the unit and determine the code of possible malfunctions.

The stability of the Ariston machines, first of all, depends on correct operation... If there are certain problems, then you can try to fix them on your own, without resorting to the help of a specialist. But for this you need to figure out what can most often cause malfunctions.

Perhaps one of the most common reasons causing problems in the operation of the machine is blockages that impede the passage of water during the process of draining it, which, in turn, leads to the inability of the washing machine to readjust to the rinsing mode. Typical signs of this problem are idle operation, loud noise and the inability to pass water through the hose (or very poor water permeability). As for the places of blockage, then they can be concentrated:

in the drain hose itself, and in most cases blockages occur if it is incorrectly installed;
often blockages form in the drain filter itself;
blockages may occur in the branch pipe, which is located between the drain filter and the tank;
and also in the pump, although this is an extremely rare practice.

In order to correct the situation and eliminate the malfunction, it is enough to clean the machine from blockages in accessible places (pump, hose, drain pump or branch pipe).

The second problem that can be encountered in the operation of Ariston machines is lack of water heating during erasing... Often, in such a situation, the washer can be shocked due to dysfunction of the insulation of the heating element.

The main reason that is the provocateur of such a malfunction is extremely hard water, as a result of which scale forms. The repair consists in replacing the damaged electric heater (heating element). To do this, unscrew the rear panel of the machine, since it is behind it that the fastener of the broken electric heater is located. First, you should disconnect all contacts and unscrew the fastening screw, then carefully pull out the broken heating element and replace the part with a new one. That's it, the malfunction has been eliminated, and the machine should heat the water as before.

The most difficult problem is the breakage or partial wear of the bearing or oil seal at Ariston. Fortunately, in practice, it is extremely rare.

To understand that machine malfunctions are bearing failure result, it is enough to pay attention to the following signs:

during the operation of the unit, all moving elements of the washer begin to emit characteristic sounds during spinning;
in this case, the shaft begins to come into contact with the sleeve;
vibrations are possible.

It must be said right away that this problem should be eliminated promptly, since otherwise you can simply break the machine. The only difficulty is that the repair will require almost complete disassembly of the car. Therefore, if you are not confident in your actions, it is best to entrust this process to a professional.

In this case, most likely, there is a malfunction associated with socket or power cable... To check the operation of the outlet, it is enough to try turning on another electrical appliance. If everything is in order with the outlet, then you need to check the wire itself. To do this, you must disconnect it from the outlet and try to "ring" with a special tester.

In the event that the electrical wire is normal, then, most likely, the problem is hidden directly in the power supply unit of the machine. This is a rather complex problem, so only an experienced professional can solve it.

It is interesting! How to open the washing machine yourself if it is locked

Another problem that can cause the machine to stop working is no drum rotation... There are several reasons that can cause such a situation: engine breakdown; wiring problems; collection in operation of the control panel or filter clogging. However, the most common cause is belt wear or excessive stretching. In this case, you need to replace it - there should not be any special problems with self-replacement.

If the reason is different, then it is best to call a professional to your home to identify the cause of the breakdown of the machine.

An equally common problem that users of Ariston Hotpoint or Margarita machines may encounter is a malfunction that occurs directly in the control unit... The main reason for this problem is the malfunction of our power grids, which is extremely problematic to deal with on our own.

In this case, the problem is easier to prevent than to fix. Therefore, before starting to operate a washing machine, in particular, Ariston, it is best to put special protective equipment, which help to protect the washing machine from power surges and other similar failures. This approach will be much more efficient and economical than replacing an entire control unit.

Operational problems can also arise during loose or broken mechanical fastenerswith which the machine is equipped. Most often, this is expressed in the weakening of the machine's hatch fixation. The problem has the following symptoms: loud noise during the operation of the washing machine and characteristic vibrations. To get rid of this, it is enough to tighten or completely replace the fasteners with new ones.

It should be noted that such models of Ariston washing machines as Margarita 2000, Hotpoint, Avsl 109 and others have unique self-diagnosis function... The bottom line is that the system independently detects a malfunction and shows on the display or by flashing indicators, its specific code. Having an idea of which code number the unit shows, you can independently identify the problem and fix it.

It is interesting! Reasons that the washing machine does not draw water

Having an idea of what most often failures can occur in Ariston typewriters, you can try repair the unit yourself... However, you should start it only if you are confident in your actions. If there is no experience in such things, it is best to entrust the repair of the washing machine to a specialist.

Many companies producing washing machines have decided to "kill many birds with one stone" by making the tanks non-collapsible. Brazed tanks are easier to manufacture (there are no screws or fasteners.) And if there is a breakdown of a part inside the tank, then you need to change the whole tank with a celek and of course the manufacturer wins.

Today we will be repairing a tank with two bearings. If you have one bearing, then the analogy of repair is complete - to knock out one less bearing.

Stages of repairing a non-separable tank of a washing machine

drill holes
cut the tank
remove the drum
knock out bearings
install new bearings
stuffing box
reassembly

It is quite simple to repair a non-collapsible tank of a washing machine. Let's start. Here is the washing machine tank itself

Along the perimeter of the weld, it is necessary to make holes at a distance of 5-8 cm (it can no longer leak) and with a diameter of 3-5 mm

Next, we take a hacksaw for metal and begin to carefully saw the tank along the seam. Sawing for a long time - you can handle it

After cutting, a plastic "ring" is obtained with the rubber of the hatch and the rear part with a drum, bearing and wheel for the belt pulley.

By the way! We do all this hard work, cheap and high quality. Sawing a tank is not so easy!

In order to remove the drum, it is necessary to remove the wheel. Since the screws are tightened with glue for reliability, it is necessary to take the bit (rod), insert it into the screw and hit it 2-3 times with a hammer, so that the glue on which it is planted moves away. Now you can safely unscrew and remove the wheel.

Take out the drum. Place the tank on the bars. So as not to damage the drum and hit the rod through a wooden block. Drum with stem does not need to be disassembled

Now you need to knock out both bearings.Take the steel rod and knock them out in a circle along the inner rings of the bearing, in turn, from the inside and outside. Knocked out bearings for scrap.

The drum shaft must be polished to a high shine.

Keep in mind that the crosspiece does not need to be removed for this operation.

The landing site must also be cleared of debris. We take two bearings in accordance with the dimensions. We smear the seat. We insert the bearing and tap on the OUTER edge of the bearing with a hammer or through the Getinax washer - the bearing must not be damaged !. We carefully hammer it all the way in - there will be a characteristic dull sound when the bearing rests on the side. We drive the next bearing in the same way.

The bearing must be sure to reach the stop!

Inner side of the tank. The procedure is completely identical. The only difference is that the bearing is clogged from the back.

We put an oil seal in the inner part of the tank above the bearing. Lubricate it lightly with silicone and it will fit very easily... This is a very important part (like the bearings) and must be new! An exception may be the lack of an oil seal on sale. In this case, the oil seal is removed carefully by hand, not with metal objects!

Lubricate the oil seal from the inside with "Grease for oil seals EBI cod 399"

We take the drum and put the tank on it. The drum rod must fit into the bearings. We put on the pulley ring and tighten with the screw.

We wash around the perimeter with silicone the sawn edges of the tank - we do not regret it, but also without fanaticism.

We connect and tighten both sawn parts with self-tapping screws around the perimeter.

Putting the washing machine together and voila, it doesn’t buzz - you don’t need to change an expensive tank!

ps This article did not touch upon the issue of complete disassembly of the washing machine. This is a topic for a separate discussion, and the disassembly is different for everyone, but since you have undertaken to repair, we hope that you have an elementary skill with a screwdriver.

Ask questions in the comments - we will answer everything.

Washing machines Ariston from the Italian manufacturer can be called "a model of reliability and quality", but they sometimes require attention. In some cases, repair of Ariston washing machines can be done by hand, and a specialist needs to be involved only in the most difficult cases.

Within the framework of this article, we will analyze the frequent malfunctions of automatic washing machines of the Hotpoint Ariston brand, study the "symptoms" of such breakdowns and decide how to properly make an independent repair.

The vast majority of breakdowns of Ariston washing machines are associated with their operation. This is recognized by the masters of service centers for the repair of washing machines. Sometimes we are talking about frankly incorrect operation, the user regularly makes gross mistakes, which lead to breakdown. But most often, the cause of the breakdown is the operating conditions, which the user either did not know about, or guessed, but did nothing. A striking example is hard water, which can completely disable the "home helper"!

So, what are the most common breakdowns on Hotpoint Ariston washing machines? We decided to compile a kind of breakdown frequency rating. When compiling the rating, we rely on statistical data provided by leading service centers for the repair of washing machines.

Blockages. The blockages themselves can hardly be considered breakdowns; rather, this is the cause of various breakdowns. Nevertheless, it is with blockages that craftsmen have to deal with most often, and it is strong blockages that most often paralyze the operation of various Hotpoint Ariston washing machines.
A heating element. Teng is in second place in our rating. Despite the fact that the heating element itself is of high quality, low-quality hard water does its job. Over time, the scale layer destroys even the best part and has to be replaced.
Water pump. In third place is the drain pump or pump. This part fails quite rarely and in most cases the reason is wear from prolonged operation.
Filling valve. Even less often, the filler valve fails. More precisely, not even the valve itself, but a rubber gasket.Over time, rubber dubs and begins to let water through, and this causes a malfunction. The gasket itself costs a penny, but the services of a master to replace this gasket are by no means cheap.
Bearings and seals. In fifth place are the failures of bearings and oil seals. On Hotpoint Ariston washing machines, this is a rarity, but if such a breakdown appears, you cannot continue to operate the machine.

Important! The electrics and electronics of the Hotpoint Ariston washing machine are deliberately not included in the rating, since it rarely breaks down.

If you have problems with blockages on the Hotpoint Ariston washing machine, do not rush to call the master, everything can be repaired quickly, with your own hands. How do you know that you are dealing with a blockage? The main sign of a blockage in the drain system is the idle operation of the drain pump, that is, it hums, but the water does not leave the tank. Usually, this trouble manifests itself after the end of the wash, the machine cannot drain the waste water to start rinsing and freezes, or it drains the water too slowly.

A strong blockage can be found in several places:

in the drain pipe, between the tank and the drain filter - this happens less often, since the pipe is quite thick;
in the drain filter - there is a blockage most often;
in the pump - in Ariston washing machines, blockages in the pump are rare, since an additional filter is installed in front of the drain pump;
in the drain hose - blockages rarely occur, mainly in cases where the hose was installed incorrectly.

How to quickly remove a blockage? First of all, you need to check and clean the easily accessible places of the washing machine, where a blockage could occur. First, we unscrew the drain filter, which is located on the Ariston machines at the bottom right under the narrow panel. Place a cloth on the filter before unscrewing it as water will drip off. Remove all debris from the filter and then screw it back on.

Next, it is important to check the drain hose and drain. In a number of situations, a banal blockage in the drain pipe can force the user to contact a machine repair specialist, when it was more correct to contact a plumber. And if everything is in perfect order, then you will need to disassemble the machine, clean the pipes and the pump. To remove the pipe, you will need to loosen two clamps, and to remove the pump, you will need to disconnect it from the sensors and unscrew the two fasteners.

If any malfunction occurs, the Hotpoint Ariston "washing machine" gives an error with a specific code displayed on the screen. It is very important to recognize the error codes of Ariston washing machines correctly, because this is a direct clue indicating the cause of the breakdown.

A broken filler valve "symptomatically" is quite difficult to confuse with other breakdowns of the Hotpoint Ariston washing machine. When the filling valve stops blocking the water, water begins to flow into the washing machine tank by gravity, even if the “home assistant” is turned off from the network.

If you hear the characteristic murmur of water being poured and drained from the tank when the machine is turned off, be sure this is a valve.

To check the filler valve, remove the top cover of the Hotpoint Ariston by unscrewing the two fasteners. The valve is located at the junction of the inlet hose with the machine body. First of all, we check the gaskets, if they are intact, then you need to measure the resistance of the device, and for this you will have to use a multimeter. We install the probes on the contacts of the filler valve and check. The meter should read approximately 30 to 50 ohms.

A defective filling valve should be replaced with a similar one; self-repair is not possible. The replacement itself is done very quickly, we unscrew the old valve from the body and screw in a new one, not forgetting to connect the sensors. It is worse if the pump is out of order, because it is a rather expensive part.

A faulty pump gives itself out during washing, when the machine should drain the water, but it does not, while the pump either does not make any sounds at all, or it hums, but the murmur of the drained water is not audible.

Note! Strictly speaking, these symptoms are superficial and they may indicate other problems (for example, with electronics), but this should give you the idea to check your pump first.

In the Hotpoint Ariston washing machine, it is at the bottom and can be reached through the bottom. It is better to check and replace the drain pump by a specialist, but you can do everything yourself, the main thing is to thoroughly study the progress of work.

The heating element is an important part of the washing machine, which is responsible for the temperature of the water in the tub, and therefore for the quality of the wash. If the heating element is faulty, the wash either does not start at all, and the system generates an error, or the wash is performed in cold water. Both should prompt you to check and replace the heating element in the Hotpoint Ariston washing machine.

Checking the heating element of the Ariston washing machine is not difficult at all. It is necessary to unfold the machine, at the bottom of the rear wall there is a service hatch, which is attached to the clips and several screws. We unscrew the self-tapping screws, and wring out the clamps with a screwdriver, after which the cover will be removed. Behind the lid, under the tank, you will see two large contacts with the fastener in the middle - this is the heating element. We unscrew the screw, and then we begin to pull the ten on ourselves, pulling it out with swaying movements.

Note! Before pulling out the heating element, it is a good idea to measure the resistance with a multimeter, perhaps the device is working properly and does not need to be touched.

As we have already noted, bearing and oil seal failures are the most rare malfunctions of Ariston washing machines. However, if this happens, then urgent action is needed. It is not difficult to recognize such a breakdown. When the bearing is destroyed, the moving elements begin to emit unpleasant sounds, the shaft begins to rub against the bushing, which leads to a depletion. If you do not take any measures and continue washing, this can lead to the fact that the drum begins to play and damage the tank.

To prevent your favorite washing machine from ending up in a landfill, you need to contact a specialist when such sounds appear, or try to change the bearings yourself. If you are determined to do the work yourself, study the information offered on our website. Otherwise, with such a complex repair, it is not surprising to make serious mistakes. The main difficulty is that in order to get to the bearings, you need to disassemble the entire washing machine, along with the tank.

In addition, it will be necessary to correctly remove the old bearings without damaging the bushing, and then install the new ones correctly so that repeated repairs are not required. Without the proper skill, not many can do self-repair, so before starting work, think about delegating it to a specialist.

In conclusion, we note that the repair of malfunctions of Ariston machines can theoretically be done by hand, especially if you have the time and patience. But all the same, in order to avoid mistakes and unnecessary expenses, it is better to turn to a specialist, because “a miser pays twice”!

Ariston washing machines can be called a real example of excellent quality and reliability. But we must not forget that they need appropriate care and preventive measures. In many cases, it is quite possible to repair the Ariston washing machine with your own hands. As a rule, specialists are involved only in the most difficult situations. In this article, we will analyze the most common problems with these devices and learn how to identify certain breakdowns and fix them yourself.The main part of the breakdowns is associated with the operation of devices, according to the specialists of the Ariston service centers.Quite often, users themselves misuse their washing machines, regularly make gross mistakes, which, in fact, lead to breakdowns.But no less often there are problems that we do not even suspect during operation. The most striking example is hard tap water, which can completely ruin the unit. Therefore, use a water softener.The rating of the most common malfunctions of Ariston machines looks like this:

Blockage. By itself, it is not considered a breakdown, but rather the cause of other, more serious problems. But despite this, it is with blockages that masters have to work most often.

Defective heating elements. Although the heating element is of high quality in all models of this manufacturer, sooner or later it fails due to too hard water.

Problems with the pump, drain pump. These parts break down quite rarely, to a greater extent due to the long service life.

Filling valve. It has to be repaired even less often, or rather not the valve itself, but a rubber gasket. The fact is that the rubber gradually begins to coarse and pass water, and because of this, a malfunction occurs.

Oil seals, bearings. Such a breakdown, although rare, is the most difficult in terms of elimination. If it occurs, then the machine stops working altogether.

Important! Manufacturers program the equipment, and if a malfunction occurs, an error code is displayed on the display. Our separate review "Error codes of the Ariston washing machine" will help you find out the cause of the malfunction and how to fix them.Have you noticed that a blockage has formed, your Ariston washing machine began to work much worse? Do-it-yourself malfunctions and repairs, even of this nature, can be carried out, the main thing is to correctly determine the place of the blockage.Important! The main sign of this trouble is manifested by a strong hum of the drain pump, water retention in the tank. As a rule, it occurs more often precisely during the end of the wash, that is, the device does not drain the waste water and cannot start rinsing the laundry, and simply freezes. Image - Hotpoint ariston arsf 125 DIY repair

Important! From the day of purchase, so that the equipment does not break down, it must be properly looked after. In our article, you will learn how to properly care for your automatic washing machine.

A blockage can form in places like this:

Between the drain filter and the tank, in the drain pipe. This rarely happens, because the pipe itself is quite thick.
In the drain hose filter. This is the most common blockage site.
In the pump. This kind of problem is also rare, because the drain pump in such machines is equipped with an additional filter.
In the drain hose. This happens more often due to improper installation of the hose.

To quickly deal with a blockage, you first need to carefully check and clean the most accessible places in the car. We do it in stages:

First, turn off the drain filter and remove all debris from it.
Then we check the sewer and drain hose.
We disassemble the device and clean the pump and pipes. But this is only if all of the above elements turned out to be serviceable and clean.

Important! In apartment buildings, power surges are very common. This can damage important electronic components of the washing machine. Protect your equipment from damage by installing a surge protector.

It will be easy for you to determine a problem of this nature if you have a Hotpoint Ariston washing machine installed in your home. Do-it-yourself repairs in this case are very simple to do.

Important! By its characteristic features, it is quite easy to distinguish this breakdown from others. The fill valve simply stops shutting off the water and it starts flowing freely directly into the tank, even when the machine is disconnected from the mains.If you accidentally heard how water enters the tank, then be sure one hundred percent that the problem is in the valve.

The filling valve is checked as follows:

Remove the top panel of the devices and unscrew the fasteners.
We are looking for a valve, and it is located right in the place where the body of the machine is connected to the inlet hose.
We check the rubber gaskets and if they turn out to be intact, then we measure the resistance of the device using a multimeter. We install the probes on the valve contacts, check that the resistance is at least 30 ohms.
If it turned out to be faulty, then it will have to be replaced with a similar one.

Important! If the problem is in the pump, then you will have to spend a lot of money on repairs. A broken pump does not allow the machine to drain the water as expected, it does not emit characteristic sounds and you cannot hear the murmur of the water being drained. Do-it-yourself repair of the Ariston washing machine in this case is inappropriate, in particular because of its high cost and the great importance of correct installation for the correct and high-quality operation of the device.

Important! Some washing machines can vibrate a lot during spinning. If you have checked, and it is not related to a malfunction, but is inconvenient, use the special anti-vibration stands for the machine.

Details for heating water are the most important in the device of any machine, since they not only allow you to reach the desired temperature, according to the selected program, but are also responsible for the quality of the wash. If the heating element is faulty, then the device either does not start at all, or gives an error. To replace this element, you need to disassemble the washing machine in this way:

We unfold the device and find a service hatch below, attached to the body with clamps and self-tapping screws.
We unscrew the fastening elements and wring out the clips with a screwdriver, which will make it easy to remove the cover.
A heating element will be visible under the cover, which looks like two large contacts with a special fastener right in the middle.
We unscrew the screws and take out the heating element, then change it and assemble the device in the same way.

Earlier, we have already found out that the least common problems in Ariston devices are related to the failure of oil seals and bearings. But they do exist, and it is recommended to solve them as soon as possible.

We already know how to disassemble the Ariston washing machine, so there shouldn't be any difficulties.

Important! First you need to understand how such a malfunction manifests itself. If the bearing collapses, then it begins to emit an unpleasant sound due to the strong friction of the shaft against the bushing. If tightened with repair, then such a breakdown will inevitably lead to loosening of the drum and damage to the tank.

Stages of replacing bearings in Ariston devices:

We disassemble the plastic tank. First, remove the pulley, screwed on with a locking paste. It is not easy to do this, but it is possible, and a chisel and a hammer will help in this. Gently tapping on the base of the screw, unscrew it. To pull out the pulley, you need to slowly, slowly swinging it from side to side.
We knock out the shaft from the drum and tank. First, we put a wooden block on the shaft, and then we knock on it with a hammer.
We divide the tank into two parts. In most models, they are bolted together, which can be easily removed and disassembled. The part from the side of the cuff can be removed very easily, but the second part should be removed very carefully so as not to damage the drum.
Inspect how damaged the shaft sleeve is. If it turns out to be already unusable, then replace it with a new one.
We knock out the outer bearing with a hammer and a metal rod and take it out.
We turn the tank over and knock out the second bearing located on the inside.
We take out the oil seal and clean the bearings from rust, coat them with special grease.
We begin the installation of already working bearings from the inside, and drive it back in the same way.
Next, we carry out all the actions in the reverse order.

Important! The topic of bearing replacement is described in detail on our portal of useful tips in another article "Repair of the drum of the Ariston washing machine."