Hotpoint ariston ll40 DIY repair

Details: hotpoint ariston ll40 DIY repair from a real master for the site my.housecope.com.

The elements are clear, but the output of the controller is not quite. Yes, in general, the question is not in the language, but in the malfunction!

You 34rus! can you recommend something specific?

The water touches slightly. But as I understand it, the heating element should not turn on dry ?!

And watch the pump on the subject?

Thanks for the answers, I will certainly see how you write!
I found the scheme on but it is better to communicate with you, there they consider themselves "above the roof" - not very pleasant! Yes, there is definitely no indication of LL40 on the diagram? but how do these "masters" write this is it ?!

al13474_450.rar 373,27 KB Downloaded: 1238 times

Image - Hotpoint ariston ll40 DIY repair

Dishwashers of the Italian brand Hotpoint-Ariston are quite in demand. And it is no coincidence at all. The products of this manufacturer invariably have excellent characteristics and functionality. Dishwashers of this brand are available in compact, medium and full size formats. They can fit into any kitchen. And with all this, they are sold at an adequate price. Unsurprisingly, they are very popular.

As with any complex equipment, Ariston dishwashers can sometimes have malfunctions and malfunctions. Some troubles are solved quite simply, but to fix others, either certain skills and experience with equipment will be needed, or you will have to contact specialists from the service.

The name and the system itself are patented and are usually used in washing machines and dishwashers of the Bosch and Siemens brands. We're watching Ariston. In this situation, the protection against leaks of the housing, which is a pallet with a float, has worked. When a leak is formed, water is drawn into the sump and the pop-up float blocks its further advance.

Video (click to play).

We shut off the water supply and disconnect from the network. What is needed to correct the situation? Carefully check all connections through which water circulates and the tightness of the wash cabinet. The tube on the circulation pump could come off. The pump can be accessed through the bottom of the machine.

2. Water does not flow into the machine (code AL02; 2 flashes; 4 flashes). According to the manufacturer, you need to immediately check the water inlet valve. There is no reason not to trust a serious company. It's just better to start with more prosaic things. To begin with, it is worth clarifying - is there water in the tap? Is her pressure enough? Any dishwasher has a minimum water pressure level at which it can work normally. Otherwise, the bay is impossible. Is the water and pressure normal? Then we check the inlet hose along its entire length. There should be no kinks or kinks. If there is, it is necessary to eliminate them. If your inlet hose is equipped with an anti-leakage valve, check the indicator of this valve.

Sometimes the indicator is the hose itself (it changes color). If the protection is triggered, the valve blocks the water supply directly near the tap. This type of hose has disposable protection and will have to be replaced with another one. It will be useful to check the filter mesh at the entrance to the machine. The mesh may well be clogged with rust or other contaminants in your tap water. If this is not the case, then - yes, you need to check the water inlet valve. Its nutrition may be disturbed. Checking the wires. If necessary, we replace it with a serviceable one.

3. Dishwasher Ariston does not drain water (code AL03; 1-2 flashes; 3-4 flashes). The lack of draining is almost always due to a problem with the operation of the drain pump or water level sensor. The pump may not work (or it may not work correctly) in several cases: clogged drain filters, the pump impeller is blocked, or the pump is faulty (or the wire could simply come off). In the first case, you need to remove the filters that are located at the bottom of the washing chamber, and thoroughly clean them from dirt.

Filters are washed under running water. The impeller of the drain pump may also be contaminated with food debris or shards of crockery. It is required to clean and ensure its unimpeded movement. The impeller should rotate without interference.

To check that the drain pump is working, you will have to disassemble the bottom of the dishwasher. After removing the base, access to the internal components of the machine opens. Upon gaining access to the pump, we carefully examine its contacts. Then you need to check the integrity of the windings with a multimeter. In the event of a pump malfunction, you will have to replace it with a new one. And the last possible option is a malfunction of the electronic control module. Trying to repair it is pointless. It can only be replaced.

4. Defective circulation pump or level sensor (AL05; 1-3 blinks; 3-5 blinks). The circulating pump is the main component of the dishwasher, its motor.

To get to it, you have to disassemble the dishwasher from the bottom (just like when replacing the drain pump). It is necessary to check all the contacts connected to it. If there are breaks, you need to restore the connections. Check windings. Disassembling the pump is problematic. Although there are craftsmen who can do it. Replacement may be required. The level sensor is located in the same part of the machine.

He may also have loose wires or clog the tube. Most often, you will need to replace it with a new one.

5. Power supply of the heating element is broken (code AL10; 2-4 flashes; 4-6 flashes).

A malfunction of the heating element can provoke either the lack of heating of the water or its excessive heating. You can get to the heating element using the same method as for checking the drain pump and pump. It is necessary to check the integrity of the contacts. You will need a multimeter again. It is necessary to ring the heating element circuit. Defective heating element must be replaced. Sometimes it may be necessary to check the thermistor installed in the heating element. If necessary, we just change it to a serviceable one.

Of course, no machine is able to diagnose problems with absolute accuracy, but it will help to indicate the most probable direction of the search. For example, if you saw a message about a heating element malfunction on the car, and the service technician claims that you need to replace the motor, drain pump and pressure switch - you can politely tell him: Sorry, but you're wrong! Or something else. A separate description of how to disassemble the dishwasher for further repair is not at all difficult to find. And who will do this repair - decide for yourself. Download dle 10.6 movies for free

Ariston Hotpoint dishwasher errors: interpretation of error codes, recommendations for troubleshooting

The developers of Ariston Hotpoint dishwashers have thoroughly thought out not only the design, but also provided for the possibility of prompt detection of malfunctions in the operation of equipment. Equipment of this brand signals about impending breakdown, "reports" about violations of different meanings. The code displayed on the panel gives the owner the right to decide whether the service center or he himself will be engaged in repairs. Convenient, right?

How the Ariston Hotpoint dishwasher errors are determined, you will learn from the article presented by us. It describes in detail what the code laid down by the engineers warns about. It is thoroughly described what you can do on your own to correct the situation, and when it is better to contact the repairmen.

The author gives the subtleties of diagnostics, gives advice, upon adherence to which the risk of breakdown and failure of the machine is sharply reduced. Photos, video recommendations and reviews are used as a useful informative addition.

The PMM Ariston has a self-diagnosis system. As soon as the control module detects a malfunction, it immediately terminates the execution of the program and displays a hint code.

Let's consider the most common mistakes - from easily fixable to requiring specialist intervention.

This code indicates a loss of tightness in the PMM joints. If you look inside the dishwasher, you will surely find water on the pallet and a floating "float", which sent a signal to the control board about a malfunction under the code 01... On devices without a digital screen, light bulbs will blink: for machines with 4 programs, the first diode will blink, for a model with 6 modes - the third from the left.

What should be done:

Disconnect the device from the power supply. If the water is already on the floor, you need to act carefully so as not to step into a puddle.
If the protection is triggered when the tank is full, press the drain program and wait until the chamber is empty.
Close the water supply valve to the PMM.
Inspect the rubber band on the appliance door, check the hose connections, the condition of the clamps and all accessible components. If you find a leak, try tightening the parts or renewing the seals. It is better to replace the failed consumables, hoses and rubber band.
With long-term operation, corrosion of the working chambers can become the cause of depressurization. Although high strength steel is used in the Ariston Hotpoint models, leaks cannot be ruled out. In this case, the worn out places are treated with special sealants and soldering.

If it was not possible to find the culprit on your own, you will have to call the wizard with a repair kit, who will diagnose and help establish the cause of the car stopping.

Cars with 4 modes without a display will be signaled by the flashing of the second from the left diode, and those designed for 6 - by the fourth. The first thing to do in case of an error 02 - make sure that there is water in the system, but for some reason does not flow into the device. To do this, you can simply open the tap at the nearest water intake point. It does not hurt to check the shut-off valve if it is installed separately for the PMM.

Causes of error 02 and their elimination:

The system has low pressure, i.e. water flows from the tap under a weak pressure. A machine with such power is not enough, and it will not work. In this case, you just need to postpone washing the dishes until a normal flow occurs.
The door latch is broken, so the device does not start the program, so as not to create a flood.
The inlet filter or inlet hose is clogged with various impurities found in the tap water. In this case, you need to unscrew the inlet hose, make sure that it is not pinched and is working properly. Then rinse it and the protective mesh under high pressure.
Supply valve problem. If the blockage is not detected, and water does not enter the machine, most likely, the voltage required from its opening / closing has ceased to flow to the water supply valve. In 99% of the reason for such a breakdown is power surges. In this case, it is better to replace the part with a new one and connect the device through a stabilizer.

If the machine is under warranty, it is better to contact the service center to replace the defective elements.

Long-term working machines have one of the most frequent breakdowns under the code 01 may indicate worn fasteners in the internal spray system. It is easy to repair such damage yourself.

To check the state of the system, you need:

Remove the lower basket of the dishwasher - there is a lower spray arm under it. Its blades need to be unscrewed and removed.
Now inspect the fastener - essentially a plastic or metal ring that could be cracked or otherwise damaged. If problems are found, it is better to replace the mount (and the sprinkler itself) by unscrewing the old fasteners with a wrench, and then installing a new holder.
The upper spray arm is attached to the upper basket. To get to it, you need to pull out the tray, squeeze the stops and unscrew the rotating blades.
Here you need to check the sealing rubber ring, the fastening nut and the water supply channel, if necessary, replace the broken elements and reassemble the system.

The reasons for the failure of parts are most often scale, penetration of small objects or natural wear and tear during active use. But such a repair is quite simple to do with your own hands, the main thing is to find an exact match of parts for your PMM model.

Often the reason for stopping the machine is blockages from food debris on the dishes.If the drain hose, pump or branch pipe is clogged and the maximum allotted time for removing water is exceeded - the machine will signal in numbers 03... In machines without a display, this will be a simultaneous blinking of 1 and 2 or 3 and 4 diodes (for 4 and 6 programs, respectively).

In this case, you first need to make sure that the hose is passable - it may simply be pinched or clogged with a food waste "plug", as a result of which the pump cannot push the waste water into the sewer.

If checking the filter and hose did not help solve the problem with the drain, the reason may lie in a malfunction of the drain pump. The condition of its connections and wiring is checked with a multimeter. If the voltage indicator is insufficient, the part needs to be replaced.

Also, the cause of problems with the drain can be:

A break in the wiring leading to the pump - you need to "ring" and, if necessary, solder the contacts.
Penetration of a small object into the pump impeller - the part is disassembled and the interference is eliminated by mechanical cleaning.
Breakage of the water level sensor or clogging of its tube - you need to check the voltage and, if necessary, clean the part.
Malfunctions of the pump triac on the control module - the element must be replaced with a new one.
Incorrect connection of the drain hose. Some models have a special code for this error. A14, which is displayed if the waste water, instead of going to the sewer, is returned back to the machine.

The most difficult case is a board failure. But sometimes the problem can be solved with the help of a simple "resuscitation" of the electronics - disconnect the device, give 10-20 minutes to rest and reboot.

But even if this method worked, the failure can repeat itself at any time, so it is worth contacting the specialists for examining and flashing the board - perhaps the contacts have moved away or the module tracks need to be re-soldered.

If you notice that the machine washes dishes with cold water, the problem most often lies in a malfunction of the heating system. It is easy to detect a malfunction: the body of the appliance remains cold throughout the entire cycle, and traces of grease, food and coloring drinks remain on the dishes themselves, which are usually easily removed with warm water.

AL04 - malfunction in the supply circuit of the NTC temperature sensor. For machines without a display, this will be the signal of diode no. 3 or no. 5 (for 4 and 6 programs, respectively). In this case, disassembly of the machine is required, inspection and verification of the voltage at the sensor contacts.
AL08 - malfunction of the heating sensor (blinking of 4 diodes). If the PMM signals a sensor malfunction, this does not mean that it is out of order. The part may be loose on the tank or there may be an open circuit in the circuit from the module to the sensor.
AL10 - problems with heating elements (simultaneous blinking of 2 and 4 or 4 and 6 diodes). The causes of malfunctions may be an open circuit in the circuit of wires leading to the heating element, a burned out relay on the control module, or the combustion of the heating element itself. These failures are common in hard water areas. In this case, you need to disassemble the machine, check the wiring, and possibly replace the heater or module.

Since the repair of the heating system requires dismantling, disassembling the device and professional diagnostics, you should not start it yourself without a decent experience in working with electronics. In this case, the most correct solution would be to contact the Ariston service center.

But sometimes problems with the heating system can be the result of improper operation. For example, if the machine is not properly connected, it will constantly draw and drain water, not having time to heat it up - alas, such cases are not uncommon, if you entrust the installation of the PMM to an inexperienced master. The solution here is obvious - to dismantle and reconnect the device.

Another easily fixable problem is filter clogging, as a result of which water circulation deteriorates, and the heater simply does not turn on.Therefore, before contacting the service center, try to clean the filters, hoses and check this guess.

Removing blockages and replacing worn gaskets is a task that does not require special skills and special tools. But when the electronics or the main components of the device fail, you have to partially disassemble the machine and know how to properly dismantle and check its elements.

Serious malfunctions in the dishwasher, requiring a mandatory call from a certified service technician, include an error 06 - violations in the supply circuit of the bay valve. The video will acquaint you with the features of identifying and eliminating a breakdown:

AL07, AL08, AL09 - errors in the operation of the control unit.
AL10 - problems with heating elements or intake valve electrics.
AL11 - failure of the circulation pump, which supplies heated water to the spraying system. If this part breaks down, the machine will collect water, heat it up, but during the washing phase it will turn off.
AL99 - means that there was a break in the internal wiring or damage to the network cable. Requires checking all wires or replacing the Control Unit.

When such errors appear, the first thing to do is to clear the filters and reboot the system. If you know how to handle a multimeter, check the resistance of the thermistor, heating element, circulation pump and inlet valve. But the problem of such failures is that any foreman for each of these errors will even give a guess about a dozen possible failures. Therefore, it is still better to carry out a complete diagnosis of the device.

The author of the video tells in detail about the causes and methods of eliminating breakdowns, indicated by code numbers 10 and 11:

Although the Ariston Hotpoint is a very reliable dishwasher, operating errors can damage it too. And in order not to become a regular customer of repair shops, you just need to follow a few tips that will extend the service life of the equipment.Recommendations for use:

Ariston Hotpoint has filters that purify water from various impurities. To avoid clogging, they must be cleaned in a timely manner.

It is recommended to install a grease filter at the sewer inlet to avoid external blockages.

To make the machine easier to operate, wipe the dishes with a napkin before loading to remove any food debris.

If hard water flows in your water supply, use special softening salts or install a special filter at the inlet to the PMM.

Do not use soaps, shampoos or other substances not suitable for dishwashers as detergents.

Do not overload the dishwasher with items.

Rinse and dry the tablet tray every time you start the machine.

Place the cookware so that it does not touch or block the spray arms.

And the last tip - at least once a month, arrange a "day of cleanliness" for your assistant, running her at idle mode along with a cleaning and disinfectant.If you are good at repairing household appliances and are going to troubleshoot the dishwasher with your own hands, then you should give it a try. True, there is a sure way to avoid such troubles - compliance with the operating rules.How to properly care for PMM to avoid damage:

Disconnect the rubber fasteners of the heater and remove the heating element.

Tip: To make the correct wiring, take a photo of the connectors before removing the item from the slot.

Run the clipper after the repair to test the new element.

When water does not enter the Ariston dishwasher, or, conversely, is constantly being poured, check the intake valve. The part cannot be repaired, so you will need to disassemble the PMM:

Remove the side or back panel (depending on the model) of the dishwasher.
The valve is located just behind the inlet hose.
Unscrew the valve fasteners, disconnect the wiring.

For replacement, a part is selected for a specific model of a dishwasher.

The pressure switch could also break. The reasons for its breakdown are natural wear and tear, burning of contacts, blockage in the pressure tube.

How to disassemble the car and get to the sensor:

Access the bottom of the dishwasher.
Find the level sensor. It looks like a box of pipes.
Remove the two mounting bolts.
Remove the tube from the box using pliers.
Examine the reservoir (box) for pressure.
Check the electrical part of the pressure switch by measuring the resistance at the contacts.
If broken, install the new part in reverse order.

It is not difficult to make a replacement with your own hands.Be careful, follow the recommendations.

Below are instructions for replacing the drain pump (pump) of the dishwasher. In this repair, the main thing is to properly disassemble the dishwasher.

Open the hopper door of the machine.
Empty shelves and baskets out of the hopper.
Pull out the bottom filter as well as the metal mesh.
Unscrew the inlet hose.
Putting the machine on its "back", remove the bottom cover. To do this, unscrew the screws around the perimeter.

Disconnect the wiring connectors from the pump.
Use pliers to open the drain hose clamp. Disconnect it from the pump.
Unscrew the fastening screw, remove the pump assembly.
Reinstall a new pump with a rubber seal. Connect the wiring.

Note that there is a circulation pump (motor) next to the drain pump. If the pump only drains water, then the pump drives it through the car, delivering it to the sprinklers.

If PMM "Ariston" does not wash the dishes, the reason may be in the wash pump. We have described how to get to the drain pump above. Then do this:

Remove the drain pump first.

Disconnect the pump motor wiring.
Release the motor mount.
Release the metal hose clamps that attach to the circulation pump (three hoses in total).

After pulling it out of the body, you need to remove the spring at the bottom and rearrange it to a new part.
Turn the spring clockwise and remove.
To install a new engine (wash pump), you need to remove the old hose clamps and install new ones.
Fix the device in the reverse order.

So you can independently cope with the repair of the Ariston brand dishwasher. Pay attention to the operation of your equipment, if you notice deviations - conduct an inspection.

A dishwasher breakdown causes a storm of unpleasant emotions, forcing the owners to wash the dishes by hand, albeit temporarily. The first decision that comes to mind is to call your friends. There is a possibility that they faced such a problem. Alternatively, you can start looking for a solution to the problem on the Internet. That is why we decided to write an article on how to repair Ariston dishwashers. Let's figure out what most often fails, how to fix the malfunction, in which cases it is easier to contact the master.

Ariston dishwashers are similar in design and repair features to such Bosch and Electrolux dishwashers. However, not always the breakdowns that happen to the "Bosch" can happen to the "Aristons". Of course, as in other equipment, dishwasher parts are subject to wear and tear, but still the following malfunctions occur most often in Hotpoint Ariston dishwashers:

failure of the heating element, which can lead to poor-quality dishwashing, as well as knocking out plugs of the electrical network;
water intake into the machine is very slow or absent, the reason for this is a blockage or breakdown of the filler valve;
drainage of water with a non-stop set, this malfunction is also a consequence of a breakdown of the filling valve or water level sensor;
the dishwasher makes unusual noise and sounds, this indicates either a blockage of the rocker arms inside the tank of the machine, or a malfunction of the circulation pump;
a water leak in the machine informs about a breakdown of the drain pump, a leak in the hose or a loosely closed door;
the lack of drainage also indicates a breakdown of the drain pump and clogged filters.

Important! If you try to solve any problem with the dishwasher that is under warranty, you will void the warranty service.

A malfunction of the heating element in Ariston dishwashers is most often manifested by the appearance of an unpleasant odor. In this case, there may be no error on the display of the machine, the water heats up to the desired temperature, the machine works normally, the dishes are well washed. In fact, the appearance of the smell alone should be a warning to you of danger. After all, this is the smell of burnt wires, further melting of the insulation can lead to a short circuit and a fire.

What is to be done in this case? Let's describe all the steps in sequence:

First, the dishwasher must be disconnected from the electrical network, water, sewer and pulled out for ease of operation.
Next, disassemble the walls, if any, if necessary, marking with a marker where the screws should be, this will help not to get confused during assembly.
Under the soundproofing material of the right wall of the Ariston dishwasher there are wires going to the flow-through heating element, they need to be inspected for burnout.
The heating element itself is located on the side of the bottom and looks something like in the photo, usually the terminals of the heating element burn out, circled in a red circle. You cannot replace them separately, so you will have to completely change the entire ten.
Having released the clamps, you need to remove the heating element and connect a new one in its place, this should not cause any difficulties.

Important! To secure the new heating element, four new clamps are required, since the old ones cannot be reused. Self-replacement of this unit will cost you about 3000-4000 rubles.

After installing the heating element, it is necessary to run the shortest sink. To check the tightness of the connections and how the machine works.

If everything is in order, then assemble the dishwasher and put it back.

In the event of a malfunction of the filling valve, water is constantly drawn into the machine and immediately drained, or water does not enter the dishwasher at all. The contacts in the valve can burn out, the performance of which is checked with a multimeter, or the shutter can jam in the "open" or "closed" position. In both cases, the valve will have to be replaced. This is not difficult to do.

The water inlet valve is located inside the dishwasher just behind the inlet hose connection. Depending on the model of Hotpoint Ariston dishwasher, you will have to remove the side panels of the machine and the back wall.

For your information! When typing and constantly draining water, an error F5 appears on the display of Hotpoint Ariston dishwashers.

Constant water intake and drainage can also be caused by a faulty water level sensor. The pressure switch either itself fails as a result of prolonged operation, or the sensor contacts are oxidized. In case of oxidation, you can strip and update the wires with terminals. If the sensor itself breaks down, the pressure switch must be replaced. How difficult it is to do this, judge for yourself by studying the article, Replacing the water level sensor in the dishwasher.

Before deciding to replace the circulation pump and pump, you need to check them and make sure that these elements are faulty. It may turn out that one of these units is working, and we are already tuned in to expensive and dreary repairs. How to check for a malfunction of the circulation pump and the pump in the Hotpoint Ariston dishwasher?

Disconnect the dishwasher from the mains and disconnect the inlet and outlet hoses.
We put the rags somewhere in the free space in front of the dishwasher, and then slide the machine onto the rags so that you can put it on the back wall.
Unscrew the rear bottom panel of the Hotpoint Ariston machine, and then place it on the back wall and unscrew the bottom.

Attention! When removing the bottom of the dishwasher, be careful with the anti-leakage sensor, do not pull off its wire.

Now we have access to the required units. We take an ohmmeter, set the minimum value, and then put the probes on the contacts of the pump, and then the circulation pump.
If the value on the ohmmeter display is about 1500, you can leave neither the pump nor the pump, most likely, the problem is not with them, but if the value is much lower, you may have to think about replacing these elements on the Hotpoint Ariston dishwasher.

We made sure that the pump does not work, we will change it. First you need to disconnect all wires and connectors from the pump and unscrew the drain hose. We unscrew one screw that holds the pump to the pallet. We take a new similar drain pump, install a new rubber O-ring and put a new pump in place of the old one.We fasten the drain hose, install the connectors and wires.

If there is a need to change the circulation pump, refer to the detailed instructions set out in the article How to replace a pump in a dishwasher?

Summing up, we note that it is quite possible to fix the Ariston dishwasher with your own hands, especially in cases when you have to deal with typical malfunctions that were discussed in this article. Happy renovation!

Professional repairmen of Ariston dishwashers are always at your service. Repair warranty. Departure at a convenient time for you. Repair requests are accepted daily.By ordering an Ariston dishwasher repair from us, you get:

Guarantee for work performed up to 6 months;

Original and quality spare parts from certified suppliers;

Reasonable prices (from 400 rubles);

Departure of the master at a convenient time for you;

Qualified and proven craftsmen;

Conscientious and careful attitude to your technique.

Before calling, please have answers to the following questions:

Complete dishwasher model (from the tag on your machine)

Dishwasher malfunction (noises, knocks, leaks, does not drain, does not wash, etc.)

Your contact phone number and address

You can be sure that your dishwasher will be repaired by highly qualified specialists, who will be the key to reliable and durable operation of your Ariston dishwasher after it has been repaired in our service center. Image - Hotpoint ariston ll40 DIY repair

Self-repair of Ariston dishwashers will allow you to save a lot of money on the services of a specialist - judge for yourself, for one call you will have to spend from 500 to 1500 rubles. Meanwhile, the dishwasher is designed quite simply, so nothing prevents you from repairing it yourself, mobilizing your skills and choosing the right tools. We will help you diagnose the equipment and identify malfunctions.

For the repair of Miele dishwashers, see another overview on our website.

If the Ariston dishwasher has stopped showing signs of life, that's not a reason to panic. Perhaps your socket is broken - such cases are not uncommon. The repair consists in checking the operability of the outlet by connecting some electrical appliance, for example, a known working lamp. If it does not work, we can safely change the outlet to a new one. You should also make sure that the wiring is in good condition.

The next culprit in need of repair could be the onboard switch of the Ariston dishwasher. The button installed here is not a switch with its powerful contacts, but a miniature switch with a simple contact group. To check the switch, it is necessary to measure the presence of voltage at its output... And by poking the multimeter probes at the input contacts, we can diagnose the integrity of the supply cable.

If the diagnostics of the switch showed its serviceability, go ahead - next in line we have fuses, which are checked visually or using an ohmmeter. We change the blown fuses, just in case we check all the wiring on board the Ariston dishwasher - who knows why they burned out. After replacing, we try to turn on the dishwasher again, analyzing its performance.

Suppose you have loaded dishes into your dishwasher and pressed the start button. In theory, the device should fill up with water and start the cycle. If the Ariston dishwasher refuses to start the program, you should start diagnosing it. But first of all, you need to reopen and close the door - it is quite possible that the problem lies precisely here.

Next, you should look at the indicators - if the device has not started the cycle, it will show an error code. Find a table with Ariston dishwasher error codes and identify the faulty unit based on the readings in the table. Any sensors, circulation pump and other components may require repair.

There may be several reasons for this:

You managed to pinch the inlet hose - a fairly common reasonrequiring inspection of all communications;
For some reason, the ball valve turned out to be closed - perhaps you closed it yourself or the children "tried" here;
There is no water supply from the water supply system - probably, some work is being done on the line or in the house, therefore there is no water. Just try opening the tap above the sink and make sure there is a water supply;
Filters are clogged - one of them is located in the inlet pipe or directly in the inlet hose (it needs to be blown out or rinsed thoroughly). If you put an additional filter on the input, check it;
The solenoid valve has broken - diagnostics consists in checking the supply voltage required to open the valve. Repair technology - complete valve replacement.

When diagnosing and repairing an Ariston dishwasher, you may encounter a lack of valve power. In this case, you should check the integrity of the wiring and the operability of the control board (usually, its failure is indicated by the integrity of all other nodes).

Lack of draining is not the biggest problem with Ariston dishwashers. But if the drain pump fails, you will have to spend money on repairs, since the cost of some pump models is quite high. But first of all, you need to check the permeability of the drain hose - it may be pinched, as a result of which the pump cannot push the water into the sewer.

Also the built-in filter needs to be checked, which filters coarse dirt... If it gets too clogged, all dirt and water will remain in the cooking compartment. In addition, if the pump does not start, check the connecting wires using a multimeter. If the wires are intact, the control module in your Ariston dishwasher is out of order - it will need repair.

Dishwashers from the manufacturer Ariston have corrosion-resistant working chambers - they use strong and durable steel. However, leaks are possible. Repair technology upon detection of corrosion of the working chamber - soldering or sealing with special sealants... Also, the cause of the leak can be the loss of the properties of the seal on the loading door - we diagnose it by restarting and inspection.

Another reason for a leak is a violation of the integrity of the drain hose. Repair is useless here, it is easier to change it. We inspect the inlet hose in the same way. Also, leaks can form inside the Ariston dishwasher - in this case, it must be disassembled and carefully inspected, checking the clamps and other joints of individual units.

Do-it-yourself repair of the Ariston Hotpoint dishwasher often comes down to finding the source of the noise. Some dishwashers make noise even when in good working order, but if the noise is clearly unnecessary, you should take care of a thorough inspection. Often the engine (circulation pump) starts to thunder here, water gets into the bearings... Repair consists in replacing oil seals, and in the most difficult cases, the entire engine.

If the noises appear during the cycle, but subside when the engine is turned off, the rocker arms should be inspected - they may be clinging to something or just rattling. Often, noises arise from the dishes themselves, on which jets of water beat. Last but not least, you can suspect a drain pump, which is nearing the end of its service life.

When accepting applications for the repair of Ariston dishwashers, service centers often face complaints about the lack of normal heating. Quite it is logical to suspect a malfunction of the heating element... It must be removed and tested with a multimeter - a working heating element has a resistance of several tens of ohms. If the resistance is too high, the heating element should be changed - it cannot be repaired.

In addition to the heating element, the connecting wires should be tested - their damage leads to a lack of power supply to the heating element and a corresponding lack of heating.The thermostat may also be faulty, you need to find its characteristics and check their compliance when the temperature regime changes. If everything is working properly, then the problem may lie in the control board.

If the Ariston dishwasher does not dry the dishes, you should decide on the type of drying. Condensing drying dries kitchen utensils naturally by drying them naturally - the last rinse is carried out in hot water, plates, cups and forks are heated up and then dry quickly. Rinses help this process. If your dishwasher does not dry well enough, check the presence of rinse aid and make sure that the selected program includes drying.

Ariston dishwashers with a turbo dryer have something to repair - a fan, heating element or a control board may require repairs here. The latter is guilty of not supplying voltage to start the drying. Repair of heating elements and fans most often comes down to replacing them.

Some users have complained that the Ariston dishwasher has started to shock. This happens when any current-carrying elements come into contact with the body of the device. Diagnostics and repairs include work on a thorough examination of the insides and control of the integrity of the connecting wires - faulty wiring requires replacement.

Video (click to play).

Also you should test the heating element - it is he who most often gives a breakdown... For testing, a multimeter is used in ohmmeter mode. We remove the heating element, check the resistance between its body and contacts. If it is hundreds of megohms, the problem lies elsewhere. If the resistance is too low, then the cause has been found. Repair technology - complete replacement of heating elements.

Rate the article:

Grade 3.2 who voted: 85