In sink erator 65 DIY repair

Details: in sink erator 65 DIY repair from a real master for the site my.housecope.com.

Waste shredder jammed today. With the service key, he could not turn it in one direction, not a degree.

I decided to disassemble. Since I did not find photos, I publish a brief instruction on and a photo report.

Disconnect electricity, pneumatic button.
Loosen the attachment to the sink with the service key and remove the disposer.
Remove the sealing rubber over the washer attaching to the suspension and remove the washer itself.
Unscrew the bolt securing the drain pipe and remove the pipe.
Pull off the rubber band from above and press the antennae with a screwdriver. fastening the upper part of the casing to the right and left. Then take it off.
Turn the dispenser over and unscrew the two casing mounting bolts. Do not touch the two remaining bolts, as they are more than 10 cm long and then it is very difficult to put them in place.
Remove sound insulation.
Remove the 3 bolts connecting the top and bottom of the crushing chamber.
Carefully detach the two parts of the crushing chamber in a circle.

The cause of the jam turned out to be a piece of rather thick steel wire stuck between the grooves of the moving part and the top of the crusher. It is impossible to see and eliminate such a malfunction without disassembly.

Dear customers, from 08/20/2013 our service center accepts under warranty and post. warranty service industrial and commercial food waste disposers InSinkErator (LC50-13, SS-50, SS-75, SS-150, SS-300) only with completed warranty cards from the companies LLC "Company" ErgoDesign "and LLC" INSINK ".

Food waste disposers with warranty cards filled in by other organizations will not be accepted by our warranty service center.

Video (click to play).

Сertified In-Sink-Erator Pro Circle member “ErgoDesign” Company

LLC Company "ErgoDesign" is the Official Authorized Service Center of InSinkErator in Russia.

Connecting a food waste disposer
Installation of food waste disposer
Installation (dismantling) of In Sink Erator food waste dispensers (dismantling of any manufacturer). Departure of the master within two working days after receiving the application (on a paid basis) - 2500 rub. ;
Onsite repair, diagnostics and preventive maintenance of InSinkErator products (on a paid basis) - 1500 rub.;
Expansion of a hole in a stainless steel kitchen sink - flaring (chargeable) - 1000 rub. ;
Tips, consultations (free of charge) by calling the Technical Support for InSinkErator ™ users +7(495)729-0060 (from 10:00 to 19:00);
Emergency departure (repair) on the day of contact (extra charge for urgency 100%), if technically feasible;
Installation of Aqua Hot 98 systems (on a paid basis) - 2500 rub. ;
Expertise of equipment is carried out on a paid basis - 1500 rub.;
The largest selection of essential spare parts and accessories;
Installation work warranty - 6 months.

All expired InSinkErator models with the following faults:

water leaks at the bottom of the grinder;
knocking out plugs / actuation of the machine when turning on the grinder

they are not subject to repair and restoration according to the manufacturer's standards. InSinkErator shredders with such defects are not repairable due to safety requirements and the impossibility of replacing a number of components.

The installation and service center also performs work on the installation of water treatment systems and water filters (related work):

installation and connection of filters and water purification systems;
service (non-warranty) maintenance of water purification filters from leading manufacturers;
planned replacement of cartridges in water purification filters.

All types of work performed are guaranteed for 6 months. The work is carried out by specialists who have undergone special training and education at the plant.

The warranty period for IN-SINK-ERATOR ™ products is calculated from the date of sale ** and is specified in the warranty card.

** In case of installation and connection of the disposer by the specialists of the Authorized Service Center, the warranty period starts from the date of installation and connection of the In Sink Erator ™ device.

A list of service centers in Russian cities can be found in the warranty card attached to InSinkErator and Broan products or on the website

Attention: The shredder is intended for disposal of food waste ONLY! It is forbidden to recycle glass, metal, plastic, rubber, cloth products, threads, hair, as well as chemicals and agents intended for cleaning sewers (acidic, alkaline, biochemical)

This blog is about the Insinkerator food waste disposers. We'll show you how to DIY your Insinkerator, repair and use your food waste shredder every day, help you calculate the cost of ownership, and compare your Insinkerator with the competition.

Often, our customers take the hit of water in the pneumatic button for food waste shredders for a breakdown, in this article we will look at exactly how to extract water from the pneumatic button to ensure its operation up to a standard service life of 3 years.

Using a knife, carefully remove the pneumatic button retainer.

There are three colors of the button, the button is installed on double-sided tape anywhere in the kitchen. This food waste disposer controller is suitable for all brands and models. Before plugging the shredder into the socket of the control panel, you need to press the pneumatic button once so that the relay inside the shredder closes directly, after which the shredder will work directly from the control panel and an additional socket.

So, you have taken into account many factors when choosing a food shredder, namely the country of origin in the USA, an extended manufacturer's warranty from 2 to 8 years, depending on the model, modern induction motors with a reverse function (Evolution 200 model), weighted needle bearings revolutions - 1400 per minute, double or even triple grinding systems (models Evolution 100 - double, Evolution 200 - triple, Evolution250 - triple), stylish design and the highest degree of noise isolation in the class, everything is correct - this is the Insinkerator.
As the inventor of food waste shredders back in 1927 - for 90 years the Insinkerator company has been presenting its best developments and know-how all over the world, being the leader in this market segment of not only household but also industrial shredders. But which Insinkerator shredder should you choose, and what's the difference between the two?
Insinkerator 46

This is the initial model for a married couple of two, the average price is 9000 rubles, change ...

Buyers want to know the purpose of the food waste disposer. When washing dishes and vegetables with fruits, particles of household waste may enter the sink drain. To avoid pushing them manually, you need a food waste disposer. This avoids getting your hands dirty and clogging the sink siphon. Some users feel that the device is dangerous in everyday use. The device is designed in compliance with all safety requirements. The design provides for the presence of a protective fence and a special pusher to prevent injury. Most of the fears of using shredders are unfounded. They have a simple structure and allow you to repair them yourself with minimal knowledge of the design.

The household waste shredder is a massive cylindrical body with a motor and is suspended under the sink, replacing the siphon. The device will allow you to turn household waste into a paste, which is washed off by running water into a drain. In terms of dimensions, a household waste shredder is the size of a bottle of drinking water available on the shelves of a supermarket. The mass is also approximately equal. It is important for homeowners to know the dimensions of the appliance in order to understand the space available for mounting the shredding device.

This unit is installed under the sink instead of a siphon using a standard plumbing connection.

Installation of shredders in the case of steel sinks does not require the use of special tools. If the dimensions do not match, the drain hole is expanded to the desired size. Do it yourself or invite a master. After that, the installation is carried out according to the instructions. Self-repair of the device is possible when familiarizing with its design and performing actions in accordance with the technical documentation of the device.

Features of food waste disposers:

The product enters the grinder and is broken into a fine porridge by cams fixed to a rotating disc. If metal parts, foreign objects or a wedding ring get inside the working unit, turn off the device to avoid damage to it. The shredder is difficult to damage. The body is made of elastic plastic resistant to shock loads and other mechanical influences.

It is required to familiarize yourself with the main structural elements of the grinding mechanisms for self-repair.

Most of the devices belong to the I class of electrical safety. The power wire is equipped with a grounding terminal (three pins in foreign versions). When connecting, you must observe safety measures. The house requires a ground loop. The plastic housing of the grinder protects against electric leakage. The device should be inspected regularly for damage to the case. If threads with wire accumulate inside, then the sealing gland under the disc becomes unusable. Water begins to seep into the interior of the appliance. This will lead to a short circuit in the motor wiring, accompanied by its failure.
Performing verification operations to identify foreign objects in the shredding device begins with a visual inspection of the device. If you suspect a malfunction, you need to dismantle the shredder and clean it. For this, the device is disconnected from the power supply. A flashlight can be used to detect foreign parts and quarrels in the cooking compartment. In case of disc blocking, there is a way to manually turn the shaft by using a socket wrench. As a result of such manipulations, the problem can be eliminated and the mechanism restored to work.

A slight actuation of the pneumatic tube means that the tube is likely to be damaged. Localize the leak by any method and restore the integrity of the path. Take the trouble to use moisture resistant glue. Replacing the button will require some knowledge of the structure of the mechanism and experience in carrying out such operations.

If there are leaks, they must be repaired by using a special sealing material. This applies to the debris inlet and the dirty water outlet.

If there are children in the house, unplug the appliance from the outlet. Alternatively, provide a method to block the power consumption of the appliance. If children throw waste at the drain and turn on the water, it won't go away. This will encourage it to accumulate in the sink. An additional safety measure will be the installation of a leakage protection.

To skeptics, so many protective measures will seem superfluous. Ensuring the safety of human health is of prime importance. All recommended safety systems should be installed. Correct operation of the shredder will eliminate the occurrence of serious malfunctions and complex repairs. This will allow you to independently correct possible inconsistencies in the device. The interest in household shredders is growing. Spare parts for them are sold by specialized stores.

How does a food waste disposer work?
Many people get the impression that a food waste disposer uses blades or knives to chop and destroy food waste. In fact, there are no sharp knives in the device.

Running water from the faucet then flushes the particles through the grinding ring from the waste disposal device and into the wastewater pipe. From there, it goes to your wastewater treatment plant or your septic system.All of this means that waste disposal shredders are an environmentally friendly alternative to conventional disposal methods such as landfills. This not only helps to reduce greenhouse gas emissions, but it means that food waste can be processed and used for renewable energy. How To Use InSInkErator / How The Chopper WorksThe IN-SINK-ERATOR ISE EVOLUTION food waste disposer is an electrical device that is installed directly on the kitchen sink instead of the standard drain fittings and is connected through the drain hole to the sewerage system. You turn on the cold water, then the EVOLUTION chopper. The shredder grinds waste into the smallest particles in 10-15 seconds! This is done without the use of knives or blades. Waste ends up on a metal disc rotating at 1425 rpm. The centrifugal force grinds the waste along the walls of the grinding chamber, on which the self-sharpening metal “graters” (Grindchamber) are fixed. It is advisable to use COLD water during the operation of the device (waste processing). When using hot water, the melted fat can adhere to the inside of the dispenser and drain pipes, instead of being flushed down the drain. The IN-SINK-ERATOR ISE EVOLUTION food waste disposer is installed in any kitchen sink (new or old) with a large (8.9-9 cm) drain hole. The EVOLUTION can also be installed in a kitchen sink with a 5 cm drain hole, provided that the sink is made of stainless steel.

We are pleased to offer our clients the following list of services:

Installation of In Sink Erator food waste dispensers. The cost is 2500 rubles.
InSinkErator Repair, Diagnostics, and Preventive Maintenance
Free consultation by phone for InSinkErator users +7 (495) 649 82 75
Departure to the Customer for installation work;
Installation of Aqua Hot 98 systems
The largest selection of essential spare parts and accessories.

Here you will find answers to the most frequently asked questions about the food waste disposer.

Q. Does the shredder require periodic maintenance?
No. The food waste disposer is designed in such a way that no maintenance is required. The best way to keep your shredder in good shape is to use it regularly. To keep the system clean, flush it with a moderate jet of cold water each time after use.

Q. What are the operating costs of a shredder?
The operating costs of any of our shredders are relatively low. Because InSinkErator® shredders shred waste quickly, they use less energy. Energy consumption for the operation of the grinder 0.55 l. forces during the month are equivalent to the consumption of one 100 W bulb for an hour. All shredders use very little water, but our InSinkErator® shredders have kept water consumption to an absolute minimum - the overall water consumption increase in a home with a shredder is only 0.04%.

Q. How long does it take to shred food waste?
Just a few seconds, depending on the amount and type of waste. When all the waste is crushed, the crushing chamber is empty and the jaws rotate freely, the character of the sound changes. After complete shredding of waste, turn off the shredder and run a jet of water for about 15 seconds to rinse out the crushing chamber. In this case, all adhering residues are washed off into the sewer.

Q. What if there is waste in the shredder?
Put some baking soda in it to freshen up the scent.For extra freshness, grind a few slices of lemon or other citrus fruits in the device for a few seconds without adding water. Don't use bleach!

Q. The chopper stopped working as if the power supply had been cut off.
The automatic overload protection may have tripped to prevent overheating of the motor. Turn off the power and check if any unexpected objects, such as metal kitchen utensils, etc., have fallen into the shredder. Then press the "reset" button on the bottom of the chopper. A simple push of a button starts the motor again. If power is still not being supplied, check that the power outlet is properly connected. Most buyers facing this problem simply have never heard of overload protection before.

B. Motor hums quietly, but the horizontal disc does not rotate.
Something is interfering with the rotation of the chopper disc. All models are supplied with a universal wrench. Insert the key and wiggle it back and forth; this should help remove the obstruction. To do this, unplug the device and insert the key into the special hole in the center of the chopper bottom. Spin the disc back and forth until the disc is free to rotate 360 degrees. Remove the key and press the red restart button.

B. The motor is running, the disc is spinning, but the waste does not go down the drain.
Switch off the power supply and check the crushing chamber. Check if the two metal cams on the disc can rotate 360 degrees. If they are stuck, try tapping on them with a wooden object.

Q. Do I need a special sink or even a new sink or kitchen?
No. The shredder will match a single or two-section sink made of stainless steel or other material. A standard hole with a diameter of 90 mm is of course ideal, because shredder, supplied with accessories for this hole size. However, for most non-standard bore sizes, we supply adapter flanges. Kitchen remodeling is the right time to think about convenience and hygiene and how to eliminate food waste. In addition, you can use the services of a kitchen installer to install the shredder. The shredder can also be installed under an existing sink / in an existing kitchen.

Q. What if I have a septic system in my home?
The presence of a septic system is not an obstacle. Septic systems require a certain amount of food waste to accelerate various biological reactions. A standard 1800 L septic tank is perfect.

Q. How noisy are the food waste disposers?
Surprisingly quiet ... Much quieter than you might think! The motors of the InSinkErator® models are particularly quiet, and some of them use special noise reduction technology.

Q. If my system breaks down, can I continue to use the sink?
Breakage is extremely unlikely, but if your shredder still stops working, you can continue to use the sink as usual. Water will flow smoothly through the holes in the disc into the drain, even if the shredder is not working.

Q. Is the shredder easy to install?
All models come with detailed installation instructions, an under-sink kit and a drainage elbow. No special tools are required. If in doubt, seek the services of a professional. An InSinkErator® service company will be happy to install the shredder.

Q. Is the food waste disposer compatible with the sewer system in my city?
All sewerage systems are designed to receive waste water from houses.The effluent from the grinder consists of 70% water, its chemical composition is similar to other wastewater and, therefore, can be easily transported through any existing sewer system.

The forum and personal diaries that have existed for a long time on the site have finally received a serious update.
Now in the diaries you can insert photos, videos and even songs, use headings and tags, rate the rating of entries, subscribe to diaries and much more.
And the most important thing is of course a new set of super-smileys!

The diary can be personal as before, or it can be a group diary on a given topic.
Make friends, unite in interest groups, communicate here in the diaries on

You can discuss innovations, report bugs or make suggestions in the Project Discussion group.

Arena
La belle

Is registered: 19.09.2006
Posts: 25753
Where: yes, what's the difference.
Rewards: 2 (More.)

Disposal of food waste InSinkErator M-65

Here.
Delivered such happiness.
I hate it.
Who has that? What is the prognosis of my (possibly premature) joy? How long does the resource last?

Arena
La belle

Is registered: 19.09.2006
Posts: 25753
Where: yes, what's the difference.
Rewards: 2 (More.)

vika_max
VIP

Is registered: 26.07.2007
Posts: 2258
Location: Ukraine
Rewards: 1 (More.)

Arena
La belle

Is registered: 19.09.2006
Posts: 25753
Where: yes, what's the difference.
Rewards: 2 (More.)

The homeland of the garbage shredder is the United States. It was invented in 1927 by John Hammes, an architect from Wisconsin, to make it easier for his wife to work in the kitchen. This invention soon led to the founding of the IN-SINK-ERATOR disposer company. The idea was simple: instead of collecting kitchen waste in a bag and taking it to a trash bin, it was necessary to grind it up and flush it with a stream of water down the drain. It took 10 years of painstaking work before the disposers became commercially available - in 1938, Hammes sold the first 50 products. However, the real "breakthrough" came a little later - in the late 40s - as an increasing number of working women needed to make it easier to manage their household. At this time, disposers are moving from a technical innovation to the category of the most desirable household amenities and are increasingly being put by American housewives in third place in the list of their needs after a washing machine and the desire to have “more lockers”.

stardoc
Elite of the forum. Photo contest participant

Is registered: 02.03.2007
Posts: 4682

Erzuli
Forum elite

Is registered: 07.10.
Posts: 13598
Where: the lawn of couples men
Rewards: 1 (More.)

Erzuli
Forum elite

Is registered: 07.10.
Posts: 13598
Where: the lawn of couples men
Rewards: 1 (More.)

Arena
La belle

Is registered: 19.09.2006
Posts: 25753
Where: yes, what's the difference.
Rewards: 2 (More.)

stardoc
Elite of the forum. Photo contest participant

Is registered: 02.03.2007
Posts: 4682

Arena
La belle

Is registered: 19.09.2006
Posts: 25753
Where: yes, what's the difference.
Rewards: 2 (More.)

stardoc
In their homes and apartments, therefore, they install.
Probably right: everyone creates comfort for himself.

I'm already used to the device, I don't throw money into it, except that teaspoons can slip through. But for this, I put the usual mesh on top for the drain hole of the sink.

katjusha
VIP

Is registered: 29.02.
Posts: 15083

Arena
and is it expensive?
_________________

Why does a child need 2 parents? And then, while mom is crazy, dad is normal, and when he covers dad, mom has already been released!

Arena
La belle

Is registered: 19.09.2006
Posts: 25753
Where: yes, what's the difference.
Rewards: 2 (More.)

katjusha
About 12 thousand rubles, but it has a 5-year warranty and “made in the USA”.
We offered the coolest of them, the hundredth model IN-SINK-ERATOR ISE M-100, for 25 sput, but we decided to take it easier, without fanaticism. Moreover, the hundredth one is for cafes, restaurants, etc. We do not have much waste for such apparatus.

The IN-SINK-ERATOR ISE M-65 food waste disposer is an electrical device that is installed directly on the kitchen sink instead of a standard siphon and is connected through the drain hole to the sewerage system. You turn on the cold water, then the chopper. The shredder grinds waste into the smallest particles in 10-15 seconds! This is done without the use of knives or blades.The waste ends up on a metal disc rotating at 1450 rpm. Centrifugal force grinds waste along the walls of the grinding chamber, on which self-sharpening metal "graters" are fixed. The IN-SINK-ERATOR ISE M-65 food waste disposer is installed in any kitchen sink (new or old) with a large (89-90 mm) drain hole. The appliance can also be installed in a kitchen sink with a drain hole of 50 mm diameter, provided that the sink is made of stainless steel. It does not matter what you call it - a chopper, erator, utilizer, disposer, food shredder, crusher, meat grinder for waste or a disposer - the main thing is that We have understood you and this is "IN-SINK-ERATOR" or IN-SINK-ERATOR. There is an opinion that IN-SINK-ERATOR ISE M-65 food waste disposers are dangerous for your hands and are especially dangerous for children. Our devices are absolutely safe.

* Supply voltage: 220-240V, 50Hz;
* Power - 0.65 HP;
* Power consumption - no more than 500 W.
* Induction motor “Dura-Drive®”.
* Provides automatic protection of the disposer from overloads;
* Overall dimensions: height-318 mm, diameter: 184 mm, Weight: 8205gr .;
* Type of loading food waste - continuous loading; Grinding chamber volume 980 ml .;
* Grinding chamber: special anti-corrosion coating. Rotary grinder made of stainless steel with bolted connection for corrosion protection. Grinding ring made of stainless steel, for grinding the hardest products. Forged rotating jaws in stainless steel, 360 degree rotation;
* Enhanced Noise Reduction System - Quiet Plus®: Consisting of dual noise reduction baffle and large noise reduction housing. Improved sound insulation (acoustic foam); Disposer pneumatic control system;
* Quick-Lock® fastening system for quick and easy installation (attachment to the sink). Polished stainless steel sink inlet flange. Stainless steel plug, cast as one piece, with corrosion protection;

* 100 volt motor includes a capacitor to increase the starting torque of the chopper;
* Key Jem Buster, to eliminate blockages and jamming of the grinding disc;
* Full manufacturer's warranty: 4 years from the date of installation.

In connection with the increased trade in counterfeit products InSinkErator, an authorized service center from September 1, 2011 will accept waste shredders for repair only if there is a seller's receipt and a completed warranty card. The Service Center does not accept for repairs waste grinders illegally imported into the country; underpriced, fakes, etc.

Dear customers, we ask you to carefully consider the purchase of goods.

We sell shredders at prices recommended by the company In Sink Erator

In Sink Erator products are divided into 3 areas

• Installation (dismantling) of In Sink Erator food waste dispensers (dismantling of any manufacturers);

• Installation of Aqua Hot 98 systems

• Repair, diagnostics and preventive maintenance of InSinkErator ™ products

• Warranty and other repairs requiring opening of the InSinkErator ™ equipment are performed exclusively at the service center.

• In case of warranty repairs, the necessary components and assemblies are replaced with new ones - free of charge. In this case, the cost of work on the replacement of parts is made on a paid basis). All replaced units and parts become the property of the ASC.

• The type of repair (warranty or not) is determined based on the conclusion of the service center.

• Expansion of a hole in a stainless steel kitchen sink (flaring);

• Departure to the Customer for installation work (on a paid basis);

• Emergency departure (repair) the next day after the call (extra charge for urgency 100%), if technically feasible; repair of food waste disposers, installation of food waste disposers

• Expertise of equipment is carried out on a paid basis.

one.The food waste disposer eliminates the messy trash cans and leaking garbage bags that stain kitchen and hallway floors.

2. The waste disposer eliminates the tedious need to collect food waste. No leftovers or unpleasant odors that attract insects and cockroaches. One has only to press the button of the In Sink Erator .. 3. Dispensers reduce the volume of garbage taken out, eliminate the need to disinfect trash bins, unnecessary trips to the trash heap - this saves you time and eliminates anxiety in the house.
4. The waste disposer is hygienic as it eliminates the main source of bacteria and fungi in the kitchen. Of all the rooms in the house, the most important thing is cleanliness in the kitchen, since it is the kitchen that creates the feeling of coziness and comfort.

Manufactured under license from InSinkErator for the Italian market. The best price-quality ratio.

• 2-tier and 3-tier waste shredding technology

• Status MultiDrive ™ induction motor

• Anti-vibration ring minimizes stress on stone sinks

• Switch on / off switch in chrome included;

Video (click to play).

• Suitable for all types of sinks made of stainless steel, artificial and natural stone

Rate the article:

Grade 3.2 who voted: 84