In sink erator 75 DIY repair

Details: in sink erator 75 DIY repair from a real master for the site my.housecope.com.

Dear customers, from 08/20/2013 our service center accepts under warranty and post. warranty service industrial and commercial food waste disposers InSinkErator (LC50-13, SS-50, SS-75, SS-150, SS-300) only with completed warranty cards from the companies LLC "Company" ErgoDesign "and LLC" INSINK ".

Food waste disposers with warranty cards filled in by other organizations will not be accepted by our warranty service center.

Сertified In-Sink-Erator Pro Circle member “ErgoDesign” Company

LLC Company "ErgoDesign" is the Official Authorized Service Center of InSinkErator in Russia.

Connecting a food waste disposer
Installation of food waste disposer
Installation (dismantling) of In Sink Erator food waste dispensers (dismantling of any manufacturer). Departure of the master within two working days after receiving the application (on a paid basis) - 2500 rub. ;
Onsite repair, diagnostics and preventive maintenance of InSinkErator products (on a paid basis) - 1500 rub.;
Expansion of a hole in a stainless steel kitchen sink - flaring (chargeable) - 1000 rub. ;
Tips, consultations (free of charge) by calling the Technical Support for InSinkErator ™ users +7(495)729-0060 (from 10:00 to 19:00);
Emergency departure (repair) on the day of contact (extra charge for urgency 100%), if technically feasible;
Installation of Aqua Hot 98 systems (on a paid basis) - 2500 rub. ;
Expertise of equipment is carried out on a paid basis - 1500 rub.;
The largest selection of essential spare parts and accessories;
Installation work warranty - 6 months.

Video (click to play).

All expired InSinkErator models with the following faults:

water leaks at the bottom of the grinder;
knocking out plugs / actuation of the machine when turning on the grinder

they are not subject to repair and restoration according to the manufacturer's standards. InSinkErator shredders with such defects are not repairable due to safety requirements and the impossibility of replacing a number of components.

The installation and service center also performs work on the installation of water treatment systems and water filters (related work):

installation and connection of filters and water purification systems;
service (non-warranty) maintenance of water purification filters from leading manufacturers;
planned replacement of cartridges in water purification filters.

All types of work performed are guaranteed for 6 months. The work is carried out by specialists who have undergone special training and education at the plant.

The warranty period for IN-SINK-ERATOR ™ products is calculated from the date of sale ** and is specified in the warranty card.

** In case of installation and connection of the disposer by the specialists of the Authorized Service Center, the warranty period starts from the date of installation and connection of the In Sink Erator ™ device.

A list of service centers in Russian cities can be found in the warranty card attached to InSinkErator and Broan products or on the website

Attention: The shredder is intended for disposal of food waste ONLY! It is forbidden to recycle glass, metal, plastic, rubber, cloth products, threads, hair, as well as chemicals and agents intended for cleaning the sewage system (acidic, alkaline, biochemical)

Waste shredder jammed today. With the service key, he could not turn it in one direction, not a degree.

I decided to disassemble. Since I did not find photos, I publish a brief instruction on and a photo report.

Disconnect electricity, pneumatic button.
Loosen the attachment to the sink with the service key and remove the disposer.
Remove the sealing rubber over the washer attaching to the suspension and remove the washer itself.
Unscrew the bolt securing the drain pipe and remove the pipe.
Pull off the rubber band from above and press the antennae with a screwdriver. fastening the upper part of the casing to the right and left. Then take it off.
Turn the dispenser over and unscrew the two casing mounting bolts.Do not touch the two remaining bolts, as they are more than 10 cm long and then it is very difficult to put them in place.
Remove sound insulation.
Remove the 3 bolts connecting the top and bottom of the crushing chamber.
Carefully detach the two parts of the crushing chamber in a circle.

The cause of the jam turned out to be a piece of rather thick steel wire stuck between the grooves of the moving part and the top of the crusher. It is impossible to see and eliminate such a malfunction without disassembly.

Buyers want to know the purpose of the food waste disposer. When washing dishes and vegetables with fruits, particles of household waste may enter the sink drain. To avoid pushing them manually, you need a food waste disposer. This avoids getting your hands dirty and clogging the sink siphon. Some users feel that the device is dangerous in everyday use. The device is designed in compliance with all safety requirements. The design provides for the presence of a protective fence and a special pusher to prevent injury. Most of the fears of using shredders are unfounded. They have a simple structure and allow you to repair them yourself with minimal knowledge of the design.

The household waste shredder is a massive cylindrical body with a motor and is suspended under the sink, replacing the siphon. The device will allow you to turn household waste into a paste, which is washed off by running water into a drain. In terms of dimensions, a household waste shredder is the size of a bottle of drinking water available on the shelves of a supermarket. The mass is also approximately equal. It is important for homeowners to know the dimensions of the appliance in order to understand the space available for mounting the shredding device.

This unit is installed under the sink instead of a siphon using a standard plumbing connection.

Installation of shredders in the case of steel sinks does not require the use of special tools. If the dimensions do not match, the drain hole is expanded to the desired size. Do it yourself or invite a master. After that, the installation is carried out according to the instructions. Self-repair of the device is possible when familiarizing with its design and performing actions in accordance with the technical documentation of the device.

Features of food waste disposers:

The product enters the grinder and is broken into a fine porridge by cams fixed to a rotating disc. If metal parts, foreign objects or a wedding ring get inside the working unit, turn off the device to avoid damage to it. The shredder is difficult to damage. The body is made of elastic plastic resistant to shock loads and other mechanical influences.

It is required to familiarize yourself with the main structural elements of the grinding mechanisms for self-repair.

Most of the devices belong to the I class of electrical safety. The power wire is equipped with a grounding terminal (three pins in foreign versions). When connecting, you must observe safety measures. The house requires a ground loop. The plastic housing of the grinder protects against electric leakage. The device should be inspected regularly for damage to the case. If threads with wire accumulate inside, then the sealing gland under the disc becomes unusable. Water begins to seep into the interior of the appliance. This will lead to a short circuit in the motor wiring, accompanied by its failure.
Performing verification operations to identify foreign objects in the shredding device begins with a visual inspection of the device. If you suspect a malfunction, you need to dismantle the shredder and clean it. For this, the device is disconnected from the power supply. A flashlight can be used to detect foreign parts and quarrels in the cooking compartment.In case of disc blocking, there is a way to manually turn the shaft by using a socket wrench. As a result of such manipulations, the problem can be eliminated and the mechanism restored to work.

A slight actuation of the pneumatic tube means that the tube is likely to be damaged. Localize the leak by any method and restore the integrity of the path. Take the trouble to use moisture resistant glue. Replacing the button will require some knowledge of the structure of the mechanism and experience in carrying out such operations.

If there are leaks, they must be repaired by using a special sealing material. This applies to the debris inlet and the dirty water outlet.

If there are children in the house, unplug the appliance from the outlet. Alternatively, provide a method to block the power consumption of the appliance. If children throw waste at the drain and turn on the water, it won't go away. This will encourage it to accumulate in the sink. An additional safety measure will be the installation of a leakage protection.

To skeptics, so many protective measures will seem superfluous. Ensuring the safety of human health is of prime importance. All recommended safety systems should be installed. Correct operation of the shredder will eliminate the occurrence of serious malfunctions and complex repairs. This will allow you to independently correct possible inconsistencies in the device. The interest in household shredders is growing. Spare parts for them are sold by specialized stores.

Here you will find answers to the most frequently asked questions about the food waste disposer.

Q. Does the shredder require periodic maintenance?
No. The food waste disposer is designed in such a way that no maintenance is required. The best way to keep your shredder in good shape is to use it regularly. To keep the system clean, flush it with a moderate jet of cold water each time after use.

Q. What are the operating costs of a shredder?
The operating costs of any of our shredders are relatively low. Because InSinkErator® shredders shred waste quickly, they use less energy. Energy consumption for the operation of the grinder 0.55 l. forces during the month are equivalent to the consumption of one 100 W bulb for an hour. All shredders use very little water, but our InSinkErator® shredders have kept water consumption to an absolute minimum - the overall water consumption increase in a home with a shredder is only 0.04%.

Q. How long does it take to shred food waste?
Just a few seconds, depending on the amount and type of waste. When all the waste is crushed, the crushing chamber is empty and the jaws rotate freely, the character of the sound changes. After complete shredding of waste, turn off the shredder and run a jet of water for about 15 seconds to rinse out the crushing chamber. In this case, all adhering residues are washed off into the sewer.

Q. What if there is waste in the shredder?
Put some baking soda in it to freshen up the scent. For extra freshness, grind a few slices of lemon or other citrus fruits in the device for a few seconds without adding water. Don't use bleach!

Q. The chopper stopped working as if the power supply had been cut off.
The automatic overload protection may have tripped to prevent overheating of the motor. Turn off the power and check if any unexpected objects, such as metal kitchen utensils, etc., have fallen into the shredder. Then press the "reset" button on the bottom of the chopper. A simple push of a button starts the motor again. If power is still not being supplied, check that the power outlet is properly connected. Most buyers facing this problem simply have never heard of overload protection before.

V.The motor hums quietly, but the horizontal disc does not rotate.
Something is interfering with the rotation of the chopper disc. All models are supplied with a universal wrench. Insert the key and wiggle it back and forth; this should help remove the obstruction. To do this, unplug the device and insert the key into the special hole in the center of the chopper bottom. Spin the disc back and forth until the disc is free to rotate 360 degrees. Remove the key and press the red restart button.

B. The motor is running, the disc is spinning, but the waste does not go down the drain.
Switch off the power supply and check the crushing chamber. Check if the two metal cams on the disc can rotate 360 degrees. If they are stuck, try tapping on them with a wooden object.

Q. Do I need a special sink or even a new sink or kitchen?
No. The shredder will match a single or two-section sink made of stainless steel or other material. A standard hole with a diameter of 90 mm is of course ideal, because shredder, supplied with accessories for this hole size. However, for most non-standard bore sizes, we supply adapter flanges. Kitchen remodeling is the right time to think about convenience and hygiene and how to eliminate food waste. In addition, you can use the services of a kitchen installer to install the shredder. The shredder can also be installed under an existing sink / in an existing kitchen.

Q. What if I have a septic system in my home?
The presence of a septic system is not an obstacle. Septic systems require a certain amount of food waste to accelerate various biological reactions. A standard 1800 L septic tank is perfect.

Q. How noisy are the food waste disposers?
Surprisingly quiet ... Much quieter than you might think! The motors of the InSinkErator® models are particularly quiet, and some of them use special noise reduction technology.

Q. If my system breaks down, can I continue to use the sink?
Breakage is extremely unlikely, but if your shredder still stops working, you can continue to use the sink as usual. Water will flow smoothly through the holes in the disc into the drain, even if the shredder is not working.

Q. Is the shredder easy to install?
All models are supplied with detailed installation instructions, an under-sink kit and a drainage elbow. No special tools are required. If in doubt, seek the services of a professional. An InSinkErator® service company will be happy to install the shredder.

Q. Is the food waste disposer compatible with the sewer system in my city?
All sewerage systems are designed to receive waste water from houses. The effluent from the grinder consists of 70% water, its chemical composition is similar to other wastewater and, therefore, can be easily transported through any existing sewer system.

How does a food waste disposer work?
Many people get the impression that a food waste disposer uses blades or knives to chop and destroy food waste. In fact, there are no sharp knives in the device.

Running water from the faucet then flushes the particles through the grinding ring from the waste disposal device and into the wastewater pipe. From there, it goes to your wastewater treatment plant or your septic system.All of this means that waste disposal shredders are an environmentally friendly alternative to conventional disposal methods such as landfills. This not only helps to reduce greenhouse gas emissions, but it means that food waste can be processed and used for renewable energy. How To Use InSInkErator / How The Chopper WorksThe IN-SINK-ERATOR ISE EVOLUTION food waste disposer is an electrical device that is installed directly on the kitchen sink instead of the standard drain fittings and is connected through the drain hole to the sewerage system. You turn on the cold water, then the EVOLUTION chopper. The shredder grinds waste into the smallest particles in 10-15 seconds! This is done without the use of knives or blades. Waste ends up on a metal disc rotating at 1425 rpm. The centrifugal force grinds the waste along the walls of the grinding chamber, on which the self-sharpening metal “graters” (Grindchamber) are fixed. It is advisable to use COLD water during the operation of the device (waste processing). When using hot water, the melted fat can adhere to the inside of the dispenser and drain pipes, instead of being flushed down the drain. The IN-SINK-ERATOR ISE EVOLUTION food waste disposer is installed in any kitchen sink (new or old) with a large (8.9-9 cm) drain hole. The EVOLUTION can also be installed in a kitchen sink with a 5 cm drain hole, provided that the sink is made of stainless steel.

Waste shredder works like a combine or blender

You need to be prepared for the fact that the household waste shredder will take up a certain amount of space under the sink

The principle of operation of a household waste grinder for the kitchen can be compared with an electric blender, with the only difference that it is much more powerful. The knives in its body rotate, grinding any food waste. Even chicken bones do not become a hindrance for them. As a result, a mushy mass is obtained, which, together with the water entering the sink drain, goes into the sewer drain. Due to the fact that the waste is ground very finely, it cannot clog the drain. As a result, the hostess gets rid of more than half of all garbage, moreover, the remaining, non-food, does not spread unpleasant odors around.

Modern dispensers operate almost silently while ensuring maximum user safety. In addition, most of them have automatic protective equipment that turns off the power of the device when a foreign solid object, such as a knife, spoon or fork, enters it. In this case, the kitchen chopper cannot be turned on until the item has been removed.

Such devices came to Russia relatively recently, although they have been used in Europe and America for more than 20 years. All shredders can be divided into 2 types:

Mechanical. These dispensers are driven by the flow of water. They are quite productive and can handle even hard objects such as an ear of corn. Their main advantage, in addition to power, is their quiet operation. Safety is beyond praise - even with a great desire, it will not be possible to touch the knives through the drain. They are located very deep;
Electrical. These sink shredders work a little differently. Waste in them is crushed using small hammers, which, as it were, crush the garbage. These devices have several disadvantages - noisy operation, power consumption, and inability to cope with more solid waste.

Installing a food waste disposer is easy to do yourself

However, in fairness, it should be noted that mechanical disposers work the more powerful, the stronger the flow of water from the tap. This can be a real problem for some homeowners and tenants on the upper floors of apartment buildings. We are talking about those who quite often have a drop in pressure in the water supply system.

Helpful information! A rather serious advantage of an electric grinder can be called the fact that it is turned on only when it is necessary, in contrast to a mechanical one, which starts working with the inclusion of water.

Having dealt with the type of the disposer, is it possible to go to the choice of the model and run to buy? It was not there! There are a few more nuances to consider.

We are pleased to offer our clients the following list of services:

Installation of In Sink Erator food waste dispensers. The cost is 2500 rubles.
InSinkErator Repair, Diagnostics, and Preventive Maintenance
Free consultation by phone for InSinkErator users +7 (495) 649 82 75
Departure to the Customer for installation work;
Installation of Aqua Hot 98 systems
The largest selection of essential spare parts and accessories.

The masters of the REMHELP service center perform REPAIR OF FOOD WASTE GRINDERS in Moscow and the Moscow region.

Waste shredder repair performed at a high professional level. After receiving the application, our master leaves immediately at a convenient time for the client. All our masters have experience of 5 years and more and carry out repairs of grinders of the following brands: Bone Crusher, In Sink Erator, ZorG and other manufacturers. All spare parts are original, the warranty for the installed spare is 6 months.

Rebuilding a sink food waste disposer requires qualifications and original parts. When installing a non-original spare part, or a spare part from another grinder, a complete failure of the grinder is possible. In this case, re-repairing the kitchen shredder will be more expensive and sometimes not possible. Therefore, when choosing a service center for the repair and maintenance of a food grinder, you need to approach it carefully.

The most frequent breakdowns of waste grinders include:

1. Failure due to blockage, followed by blocking of the motor shaft. In this case, the disc with the knives is blocked by a foreign object, the fuse may be triggered. If the blockage is "dull", then it is not possible to try to turn it with a special key from the bottom of the shredder; dismantling of the shredder and qualified intervention of the master is required.

2. Failure due to malfunction of the pneumatic button. In this case, a simple replacement of the part with a new one is required. Our service center installs the original "Insinkerator" buttons.

3. Failure due to a malfunction of the electric motor. Unfortunately, we will not be able to help in this case, we are not engaged in engine repair.

4. Possible breakdowns also include a relay malfunction, cracks in the grinder housing. We can also repair the shredder body if cracks of various locations are found in it.

Our service center has been on the service market for a long time and has won the well-deserved trust of our customers. By contacting us, you will make the right choice to call the master of repair of waste shredders just call us at (495) 532-07-32. Our master will come to you at a convenient time and fix the breakdown quickly and efficiently. We value our customers, so we have constant discounts. Repair of food grinders is carried out by our specialists on the same day.

• Installation (dismantling) of In Sink Erator food waste dispensers (dismantling of any manufacturers);
• Repair, diagnostics and preventive maintenance of InSinkErator ™ products

• Installation (dismantling) of In Sink Erator food waste dispensers (dismantling of any manufacturers);
• Repair, diagnostics and preventive maintenance of InSinkErator ™ products
• Warranty and other repairs requiring opening of the InSinkErator ™ equipment are performed exclusively at the service center.

• In the case of warranty repair, the necessary components and assemblies are replaced with new ones - free of charge. In this case, the cost of work on the replacement of parts is made on a paid basis). All replaced units and parts become the property of the ASC.
• The type of repair (warranty or not) is determined based on the conclusion of the service center.
• Expansion of a hole in a stainless steel kitchen sink (flaring);
• Departure to the Customer for installation work (on a paid basis);
• Emergency departure (repair) on the day of contact (extra charge for the urgency of 100%), if technically feasible; repair of food waste disposers, installation of food waste disposers
• Installation of Aqua Hot 98 systems

• Expertise of equipment is carried out on a paid basis.
• Largest selection of essential spare parts and accessories.

Installation of the grinder has its own characteristics and recommendations, the implementation of which will ensure long-term and trouble-free operation of the device.

When connecting the shredder yourself, you must have the skills and experience in working with plumbing and electrical work, you must also make a hole in the countertop or in the sink under the pneumatic button. If you are in doubt about something, it is better to entrust the installation of the shredder to the professionals of the service company, they have all the necessary materials, tools and relevant experience. A guarantee is provided for the work performed.

The cost of installing a shredder with material in Yekaterinburg is 20 00-00 rubles.

Self-installation of the shredder:

It is important to remember that the connection of the drain pipe of the grinder to the sewage system is made using a smooth-walled siphon (elbow). It is strictly forbidden to install a traditional bottle siphon; it is also not recommended to install a corrugated siphon-elbow, it does not have sufficient rigidity and diameter, and can also get clogged. For correct button operation, the air tubing is trimmed to the required length. The Quik Lock is horizontally aligned. without distortions. The hole for the pneumatic button in the worktop is treated with silicone.

Chopper height
Distance from the bottom of the sink to the centerline of the drain. (Add 12 mm when placing the appliance on a steel sink.)
Distance from the center line of the bleed to the end of the bleed.
Chopper width.
Distance from the vertical center line of the instrument to the center line of the filter connection.

Attention: For proper drainage and to prevent water accumulation in the grinder, the level of the drain pipe should be lowered in the direction from the outlet of the device to the wall.

Loosen the nut (1) on the filter (4) with a wrench (Diagram 2.1)
Loosen the nut (2) on the extension pipe. Remove the pipe.
Loosen the nut (3) at the base of the sink flange.
Push the flange up through the hole in the sink and remove it (Figure 2.2).
Remove dirt and deposits from the sink hole.

The note: If necessary, you will have to widen the drain hole of the sink for a better connection to the appliance. Various diameters are available through your In-Sink-Erator dealer.

Turn the fastening system (Figure 3.1) and loosen the three fastening screws (1) so that the snap ring (2) can be reached.
Using a screwdriver, remove the snap ring from the sink flange. This will allow the fastening system to be disassembled piece by piece.

Place one of the two rubber gaskets (3) under the sink flange (2). Before doing this, make sure that the area is free of deposits and then place the flange with gasket in the drain hole of the sink. To secure the flange in a fixed position, it is recommended to place a weight in the sink. (Place a towel under the load to avoid scratching the sink.)
Working under the sink, slide the second gasket (3) and metal seal (4) (flat side up) over the sink flange.
With the rubber gasket and gasket in place, place the retaining ring (5) on the flange to connect it to the gasket.
After the rubber gaskets, gasket and fastening ring are attached to the bottom of the sink, slide the snap ring (7) onto the sink flange so that it fits into the cutout on the flange.
Fasten the 3 fixing screws (6) to the sink so that the fixing system fits snugly and evenly against the sink.

Failure to follow this procedure can result in blockage of the sewer line.

Remove the filter.
Use a metal brush to clean out hard deposits in the horizontal drainage system connecting the filter to the main pipe.

Water from the dishwasher can enter the chopper through the internal inlet located at the top of the chopper. Note: To prevent overfilling and clogging of the dishwasher, most manufacturers recommend installing an air block - a device to block the backflow of water (Figure 6.1). There is a plug inside the inlet tube. When it is removed, it cannot be put back.

The note: If the dishwasher / sink is connected without removing the plug, it could overfill either the machine or the sink. (Connection must be made in accordance with local plumbing regulations.)

How to remove the plug (Figure 6.2):

Lay the shredder on its side and position the screwdriver in the dishwasher connection hole, opposite the outer edge of the plug.
Use a hammer to knock on the screwdriver until the sealed plug comes out.
Remove the plug from the grinder.

If the sink overflow control is installed, it must be connected to the drain on the drain pipe (Figure 6.3). To connect the sink overflow control, remove the plug on the drain pipe by unscrewing the sink overflow hole blocker (Scheme 6.4, No.2).

Figure 6.4: Sink overflow opening blocker

(1) - Nut
(2) - Sink overflow hole blocker
(3) - Drain pipe

Caution - danger!

To avoid electric shock, disconnect electrical power before installing or servicing shredder.
It is recommended to hire an electrician to connect the shredder to the electrical circuit.
Three-phase current distribution uses a grounded plug that is inserted into a 3-hole grounded receptacle.
It is forbidden to alter the plug that is installed on the device.
Improper connection of the equipment-grounded conductor may result in electrical shock.
All wiring must comply with local electrical codes.
It is forbidden to short-circuit the ground wire to the gas supply pipe.
The shredder must be connected to grounded, permanent wiring, or the conductors must be provided with an equipment grounding conductor and connected to the equipment grounding terminals on the shredder.
Do not apply power to the device before all earthing switches are installed.

Ensure that the electrical rules are followed before connecting the shredder to the switch (4) (Diagram 7.1. For a typical direct connection electrical circuit diagram.):

This appliance must be grounded. Wired appliances include a wire equipped with an earthed conductor and an equivalent plug. The plug must be plugged into an outlet (2) that is properly installed and grounded in accordance with all local electrical codes (Figure 7.2).

Switching on / off for LONG-TIME GRINDERS:

There are 2 types of switches for continuous shredders: bipolar and air.
Bipolar switch (1): must be located in a comfortable position above the workstation with a pole-to-pole distance of at least 3 mm. Use a 20 amp bipolar switch (Diagram 7.2).

Some models of grinders (75 and 65) are equipped with a built-in air switch (Figure 7.3): it activates or deactivates the device, sending air to the control box. The most convenient location for the air circuit breaker is on the work surface. For installation, it is required to drill a hole in the work surface, through which the air hose and the lower part of the switch are then passed.

If you prefer to use a wall (bipolar) switch, the air switch can be de-energized. On a new appliance, the switch is in the off position. Using the hose (supplied), connect the air switch actuator to the switch itself, located on the underside of the appliance. Press the air switch button once; You should hear the switch click.Then disconnect the air switch actuator and the hose, which can be discarded. The appliance will now be turned on and off using the wall switch.

See instructions supplied with this type of switch. Switch for LARGE VOLUME GRINDERS:
Large volume shredders use plug switches. No separate hardware is required to install this switch.

Remove all foreign objects from the grinding chamber of the appliance before placing it in the sink.

Align the 3 fixing loops (1) of the device so that they go into the fixing tracks (2) (Figure 8.1).
Lift the device, insert the upper end (fastening washer) into the fastening system and turn the lower fastening ring to the right (using a wrench or pliers) until the fastening loops snap into the edges (3) of the fastening ring tracks (Figure 8.2). MAKE SURE ALL THREE ANCHORING HINGES ARE CLICKED ON THE EDGES. The appliance is fixed to the sink.

The note: If the shredder is equipped with a noise blocker, install it in the sink hole with the convex side up.

Steps 1 and 2 for Models 75 and 78 and LC-50 (Model LC-50 for home installation):

Place the metal flange (2) on the drain pipe (3) (Figure 9.1)
Place the rubber gasket (1) in the hole in the tube (the gasket may already be in this tube). Using one 19mm screw, secure the metal flange and waste tube to the shredder (the gasket must remain in place.)

Steps 1 and 2 for Models 65, 55 and 45:

Place the metal flange (5) on the drain pipe (6). Place the rubber gasket (4) in the hole in the waste discharge tube (Figure 9.2)
Attach the metal flange and waste pipe to the shredder with two 13mm screws (7).
Turn the device so that the pipe is flush with the drain filter. (To prevent leaks, do not pull or bend the tubing towards the filter.) If the tubing is shorter, you will need an extra tip, which you can buy at a hardware store. The chopper must be in an upright position to avoid vibration.
Connect the tube with a nut, which must be screwed to the thread of the chopper outlet. Attach the filter to the discharge pipe. (If you have a double sink in your kitchen, use a filter for each sink drain.)
Make sure that the bottom fastening ring is still on the edges of the fastening flange (Figure 8.2).

This description contains important information that you need to service the instrument.

Detach the dotted part.
Stick the description to the front of the shredder where it can be easily read.

Video (click to play).

The installation of the food waste disposer is complete. Run water through the device and make sure that it does not leak. Read all SAFETY RULES in the next section before using the shredder.

Rate the article:

Grade 3.2 who voted: 84