DIY apartment renovation tools

Hello everyone! Today I will tell you which tools may be needed for absolutely anyone repairs of any complexity.

The most important tool, which more than one repair cannot do without, is perforator... This versatile tool combines the functions of tools such as a drill, jackhammer, mortar mixer, screwdriver. In order for the perforator to perform as many functions as possible, the following components must be purchased for it:

– hammer drill with a diameter of 6 mm, 8 mm, 10 mm (the most commonly used dowels have a diameter of 6 mm, it is better to use anchors with a diameter of 8-10 mm);

– chuck with adapter (since drills for metal cannot be inserted into a hammer drill just like that, you will need a cartridge);

– mixer for mixing solutionwhich is inserted into the chuck;

– pike and scapula for breaking concrete, inserted directly into the hammer drill.

The second most important repair tool is screwdriver... A screwdriver, unlike a hammer drill, performs two functions: the first is tighten and unscrew screws, dowels, anchors, bolts and the second is drilling holes in metal... As for the hammer drill, you should purchase some accessories for the screwdriver:

– bit set for tightening various self-tapping screws;

– set of drills for metal different diameters;

– bit for tightening anchors and bolts.

If you need to cut a metal corner, channel, pipe or plastic panel to the required length, then without grinders you can't do it. For a grinder, you should buy three types of discs: cut-off for metal, diamond and grinding. Using cutting disc for metal, it will be possible to cut any metal products and plastic. Using diamond disc, it will be possible to cut products from concrete, asbestos cement and ceramics. Finally, grinding disc you can grind various metal products.

Without building level more than one repair is not complete. If you need to level a wall or floor, then you cannot do without a level. Levels come in various lengths, from 20 cm to 2.5 meters. A 40-centimeter level is suitable for the installation of windows and doors, a 2-meter level is suitable for leveling the walls, ceilings and floors. The most popular level is bubble spirit level... Thanks to alcohol, the level can be used at sub-zero temperatures. For repairs, you should purchase a building level that combines horizontal, vertical and rotary levels.

As the proverb says - "Measure seven times and cut once" and this will help us roulette... Tape measures vary in the length of the measuring tape, and their length ranges from 1 meter to 10 meters. The most optimal tape measure for repairs will be 7 meters long.

For sawing boards, bars, fiberboard or chipboard, you will need hacksaw... Hacksaws with coarse teeth and fine teeth... A hacksaw with large teeth is easy to handle with thick boards and blocks, while a hacksaw with a small tooth is suitable for plywood, fiberboard, chipboard and plastic.

Hammer Is the most indispensable tool used everywhere. The variety of hammers on the market is going through the roof. For repairs you will need the simplest hammer with wooden or metal handle, squareone side of which flatand the other beveled at the corner.

Pliers - these are pliers and wire cutters in one person.They can cut a wire, pull out a nail, or bend a piece. Pliers must be with insulating plastic on the handles, to perform electrical work.

For repairs, it is best to purchase combination wrench set with sizes from 6 mm to 22 mm.

Designed for plumbing work.

is designed to determine the right angle. It is very important that the divisions and numbers are carved into the corner and not painted with paint. Otherwise, in the future, all numbers and divisions will necessarily be erased.

It is intended for removing nails from wooden elements and for dismantling old wooden structures.

If, during the repair, you need to cover cracks with putty, level any surface, cover up mounting foam, then they will help you with this. spatulas... For repairs, you need three types of spatulas: narrow, wide and jagged. Narrow spatula with a width of 60-80 mm, it is intended for applying putty on a wide trowel and for filling in narrow places. Wide spatula with a width of 200-400 mm, it is intended for filling walls, slopes, etc. Notched trowel intended for applying adhesive solution to the surface of tiles or decorative stone.

Foam gun serves for foaming doors, windows, insulation, etc.

It is better to prepare the tools necessary for repairing an apartment before the start of the repair, so as not to be distracted by looking for some little thing, disrupting the entire planned work schedule. The list of tools is compiled on the basis of the planned stages of work that will have to be performed, starting with measurements of the apartment and ending with the removal of construction waste.

The ratio of a special and a universal tool is selected from considerations of expediency, taking into account the amount of work, the prospect of using the tool in the future, financial capabilities, and the required time to complete the repair.

The first stage of work is the measurement of existing premises and structures. This requires at least the usual roulette... but better measurements with the least amount of time are carried out using a laser tape measure. Level construction and plumb line are needed to control the location of surfaces. A 1-meter metal ruler and a square are also useful.

The next steps are dismantling of replaceable window and door blocks, partitions, floors, removal of old finishes, etc. widening openings, drilling holes, grooving channels for communications. Here you will need the usual tools: crowbar, sledgehammer... chisel, hammer, nailer, pliers, screwdrivers.

To facilitate and speed up work that requires heavy or monotonous physical labor, you can use a power tool. It is more expensive than manual, but the costs will pay off. Alternatively, power tools can be rented.

Electric drill used for drilling holes in wood, plastic, brick. There are impact drills that can work in two modes - rotary (for soft materials) and impact-rotary (for hard materials).

Puncher necessary when drilling holes in hard materials (concrete, stone), it is much more productive than an electric drill. If during the repair it is required to make openings and holes in reinforced concrete panels, then you cannot do without a puncher. It is also convenient to use it to groove channels-grooves in concrete, plaster, etc. The hammer drill can also be used as a screwdriver. Various functions are provided by interchangeable chucks.

Grinder needed when cutting fittings, pipes, grinding metal and stone surfaces. The technical hair dryer allows you to quickly remove old paint, clean hard-to-reach grooves and cracks from sawdust and dust, and warm up the gluing points.

Electric planer will significantly reduce the time spent on processing wooden surfaces.

After cleaning the room and preparing the openings and recesses, they begin electrical work and supply communications. Special electrical and plumbing tools are used here, you can buy ready-made kits. It is desirable that these works be performed by specially trained people, i.e. professionals.

An electric drill (with a special attachment) is also useful for preparing leveling and plastering mortars when preparing walls and floors.

Jigsaw convenient for cutting plywood, chipboard and other tile materials (except for ceramics).

Cutting of finishing materials is done with hand tools. For cutting wallpaper, you need good scissors with long blades, for cutting glass - a glass cutter, for cutting drywall, a sharp stationery knife is suitable. Ceramic tiles are quite expensive material, and the purchase of a tile cutter is quite justified.

Plastering tools - a trowel, usually a spatula. In addition, if decorative plaster is applied, a special shaped trowel will be required.

Spatulas it is better to prepare several - of different sizes and thicknesses. They are needed when removing old whitewash or wallpaper, and when applying plaster, and when painting window frames, and when applying adhesive for ceramic tiles.

Brushes different sizes and shapes (round, flat) are needed for cleaning surfaces, painting, applying wallpaper glue, whitewashing.

Rollers with different cladding are used for whitewashing, painting, gluing wallpaper.

Spray can be used for painting and wetting surfaces.

In addition to the above tools, which will probably come in handy, you will also need special ones, depending on the type of finish chosen. This applies primarily to the renovation of the ceiling and floor. New types of floor coverings are always accompanied by recommendations for their installation, and special tools are usually sold in the same stores. A stretch ceiling is usually ordered with installation, firms have their own tools, and you do not need to purchase it specially.

A few more words about the little things - brushes, mops, a vacuum cleaner, buckets, rags, garbage bags should always be at hand. Don't forget about respirators and masks.

Housing in a new building does not require major repairs, which distinguishes the apartment from the "secondary" real estate. However, one cannot do without "cosmetics" and design work. If you want to save money, you can refuse to hire a team of builders and decorators. However, the budget for repairs should include not only the cost of materials and furniture, but also the price of the necessary tools. What tools are needed to renovate an apartment in a new building?

The set of tools that will be required for repairs depends on the type and scale of the planned work, as well as on whether the equipment is planned to be used in the future. It makes no sense to buy an expensive professional tool for the decoration of a single room, as well as to spend money on cheap low-quality equipment. Highly-priced highly specialized devices will be the most profitable to rent.

Some tools are needed in every home. Housewarming is a great excuse to check your "stocks" and update them if necessary.

Anyone moving into a new apartment is guaranteed to need a set of screwdrivers, hammers, chisels and files. It is worth buying a drill and screwdriver. So that consumables and tools do not get in the way, you should immediately select a storage box that is suitable in size and format for them.

A few skeins of electrical tape, nails, sandpaper, screws and screws will not be superfluous on the farm.

The DIY kit also includes pliers, nailer, wire cutters and pliers. An awl is useful for woodwork, files and a hacksaw are required for metal. A set of wrenches and a standard tape measure are required in the house.

When performing locksmith work in a new building, you will need a vice, files, wrenches and adjustable wrenches. For marking the parts, a "scribe" is used - a sharp rod made of steel. Pliers, a soldering iron, a hammer, a set of screwdrivers and a hacksaw will be difficult to do without.

Almost the same set of tools is used for plumbing work.

There are not so many types of painting tools. These are rollers, brushes of different sizes, shapes and materials, as well as spatulas.

The roller is selected depending on the coating material to be applied. There is no point in buying the entire set of painter's tools when making repairs in your own apartment. It is enough to purchase those tools that are required to create a single interior.

But a set of different brushes in the house will come in handy. They are not too expensive, but if you need to quickly "fix" paint defects or update the interior, everything you need will be at hand.

The same tools can be used to wallpaper the walls.

Harm of ear cotton swabs. How to properly clean the ears of a child and an adult? Ash furniture - advantages and disadvantages Aspen furniture - pros and cons Aspen furniture - advantages and disadvantages How to choose a sledge-cheesecake for a child? Trendy names for boys in 2015 Fashionable female names 2015 The harm of noise and vibration to the human body and how to deal with it The harm and benefits of panty liners How to entertain children in the new year at home in 2017?

If the repair happened for the first time in your life, you will have to stock up on theory. One of the first questions that will arise before you is what tools for renovating an apartment do you need first? This article is> very useful to everyone who intends to independently engage in repair and finishing work. Without excess water, we will immediately give a list of tools needed for home repairs:

Here is a minimal list of tools for those who decide to start renovating an apartment on their own.

Attention! If you hire workers to carry out repairs, they MUST BRING IT WITH YOURSELF. Any demands on their part to purchase this or that instrument are unauthorized! Materials - wallpaper, paint, glue - are another matter, but even then, try to control their consumption according to the estimate.

Better, of course, to try and do everything yourself. Now you know which tools will be useful for you first of all for apartment renovation.

Other articles on this topic:

Do you associate repairs with a difficult, costly and long process? Our site "Remontik" will prove you otherwise! Believe it or not, the renovation process can be a real pleasure if you turn a rather boring and difficult task into a simple and fun process.

If you are thinking about how to make repairs in an apartment with your own hands, then the first thing you need to observe is the sequence of all actions, and all the stages should be passed one after another, according to a prepared plan in advance.

So, if you are in the mood and are seriously thinking about making repairs in the apartment with your own hands, then you should adhere to the following steps:

Indeed, you can make an apartment renovation with your own hands, without resorting to the help of professionals, if you adhere to a clear scheme and carefully study each of the stages, which we will discuss in more detail below.

List of tools required for DIY apartment renovation

1. Ladder. It may seem to someone that she is not the most necessary tool on the list, but it is not.
2. Special tools for marking:

• tape measure 10 or 2-3 meters;
• square;
• metal ruler one meter;
• carpenter's hydraulic level - use for more accurate marking of horizontal surfaces;
• cord - beacons are installed along the stretched cord for alignment;
• plumb line - ensures the evenness of the walls during plastering - the surface is fixed.

1. Hand tools (you can buy them in whole sets or separately):

• hammer;
• ax - pay special attention to the sharpening of the blade (for the left or right hand) and the ax itself, which should sit as tightly as possible on the butt;
• hacksaw - blade thickness from 1 mm with a well-polished surface;
• chisel - up to 10 mm (needed for woodwork);
• log house;
• chisel 20 mm wide (used for woodwork);
• scissors for metal;
• cutters.

1. Power tools:

• an electric drill with a perforator (necessary both during repair and after its completion);
• angle grinder, can be used when grinding surfaces and corners, as well as when cutting stone and metal;
• screw cutter (for this you can use a drill at low speeds);
• electric jigsaw.

1. Tools for other jobs:

• paint bath (container for paint, glue, primer, etc.);
• scrapers, spatulas (for applying plaster, putty, putty and removing old wallpaper and paints);
• rollers (large shaggy, small foam rubber) and a "fishing rod" to them;
• brushes (round and flat);
• skin (different grain size) - designed to smooth surfaces;
• a syringe gun (for squeezing out various glue-like mixtures) plus a gun cleaner;
• masking tape (used for neat painting).

This is the minimum list of necessary tools for those who are planning to renovate an apartment on their own.

Every renovation, be it major or cosmetic, begins with a global preparation. First of all, you will need to perform all dismantling work: removing plaster, whitewash, wallpaper, door blocks, flooring and, if necessary, you will need to dismantle the partitions, as well as rearrange them.