Irrigator Panasonic DIY repair

Details: Panasonic irrigator DIY repair from a real master for the site my.housecope.com.

The service center provides comprehensive repair services for irrigators in Kiev and Ukraine. We accept the following brands of irrigators for service WaterPik, Oral-B, Donfeel, Philips, Bremed, Aquajet, CS Medica, Panasonic.

Image - Irrigator Panasonic DIY repair

Image - Irrigator Panasonic DIY repair Image - Irrigator Panasonic DIY repairImage - Irrigator Panasonic DIY repair

Image - Irrigator Panasonic DIY repair

Image - Irrigator Panasonic DIY repair Image - Irrigator Panasonic DIY repairImage - Irrigator Panasonic DIY repair
  1. Irrigator diagnostics and troubleshooting;
  2. Discussion of the diagnostic result with the owner of the device;
  3. Irrigator repair;
  4. Testing;
  5. Issuance of an irrigator, registration of a warranty card after repair.

Diagnostics is absolutely free, up to 4 days. Repair from 200 UAH, period 3-5 days. Availability of equipment and a specialist with experience. Parts for repair are available or on request.

  • - the irrigator does not turn on;
  • - does not pump water;
  • - power is not regulated;
  • - no water supply;
  • - an irrigator that is designed for a 110 network was connected to 220.

Irrigators with breakdowns "do not pump water", "no water supply", as a rule, require replacement of the pump. Before taking the irrigator for service, check the availability of a pump for your model of the irrigator by using the contact center numbers. The model name of the irrigator can be found on the bottom of the device, on the box, in the accompanying documents for the equipment. Pumps for different models are not always available and even on order.

Some models of irrigators are designed for a voltage of 110 volts (this product is made for the American market), it is very important, when buying an irrigator, to clarify what voltage the device is designed for. In practice, we often come across cases when, unknowingly, the owner connects the device to a 220 volt network without a voltage converter, thereby rendering the device inoperative.

Video (click to play).

The irrigator is designed for a voltage of 110 volts, but connected to a 220 volt network, do not be upset. Our service center can restore the device. The cost of repairs is from 450-550 UAH, which is much cheaper than buying a new device. After repairs, our center gives a guarantee that the irrigator will work, you can also buy a voltage converter from us, much cheaper than in the online store. The device cannot be used without a voltage converter from 110 volts to 220 volts.

The online store Magazin-irrigatorov.rf guarantees its customers authenticity, high quality, performance, complete completeness of irrigators and other oral care products and full compliance with the declared consumer properties at the time of purchase.

All products presented in our online store are fully certified in Russia, has a detailed description and instructions in Russian, as well as a manufacturer's warranty card, which gives the right to repair the irrigator or toothbrush at an authorized service center.

Purchase returns of proper quality is regulated by the Law on the Protection of Consumer Rights and the List of Goods of Good Quality, approved by the Decree of the Government of the Russian Federation of 19/01/2001 No. 55 and the Law on the Protection of Consumer Rights. If the irrigator or toothbrush is found to be defective through the fault of the manufacturer, on the basis of the above documents and in the presence of cash and sales receipts, as well as a warranty card, we will be able to exchange the product for a new one.

All irrigators and toothbrushes come with a factory warranty from 1 (one) year from the date of sale depending on the manufacturer. The warranty period can be found in the product description on our website. In addition, you can check the warranty period with our specialists by phone. .

The warranty period for an irrigator or a toothbrush is calculated from the moment the goods are handed over to the buyer.

Warranty repairs of irrigators and toothbrushes are carried out in authorized service centers. The terms of warranty service are determined by the current legislation of the Russian Federation, the manufacturer and are indicated in the operating instructions for each product or in the warranty card.

Warranty repair of goods is carried out only with a correctly completed warranty card.

When buying, be sure to check the correctness of filling out the warranty card, the presence of instructions and demand that the completeness and functionality of the irrigator or toothbrush be checked in your presence.

  • Service center for the repair and maintenance of the irrigator Aquajet LD-A7:
    117218, Moscow, st. Novocheremushkinskaya, 34, building 1
    Tel./Fax: (495) 718-88-00

WATERPIK
Address: Moscow, Semenovskiy per., 15
Phone: (495) 785-21-81 (Mon-Fri: from 9.00 to 18.00)

DONFEEL
Address: Mytischi, st. V.Voloshina, 19/16, office 207
Phone: (495) 771-05-76 (from 9.00 to 21.00 seven days a week)

Service center for the repair of toothbrushes OMRON and irrigator Aquapulsar OS-1 (CS Medica)
Address: Vorotnikovskiy per., 7, building 3
Phone: (495) 221-73-45 (Mon-Fri from 9.30 to 19.00, Sat from 10.00 to 18.00, Sundays and holidays - days off).

PANASONIC
(495) 725-05-65 or 8-800-200-21-00

Read also:  Button on the jacket DIY repair

How to quickly and efficiently clean a clogged Waterpik irrigator is a question that any user of this simple and functional device has to face. Devices from Waterpeak are really simple in design, operation and maintenance. At the same time, they are distinguished by the quality of workmanship, durability and a wide range of functions. But even the most reliable unit needs regular maintenance.

Irrigators are often used with the use of special solutions in the composition of the liquid, which increase the cleaning effect. But the flip side of their use is the contamination of the device and the need for more careful maintenance. In humid environments, mold is likely to occur. Its presence, especially in the internal cavities of the apparatus, can limit the therapeutic effect of hygiene procedures and create additional health problems.

Mains powered irrigators designed to operate in high humidity conditions have a high level of safety. However, in this case, there are recommendations designed to ensure the safe and long-term operation of the device without negative consequences for the owners and the device itself. They are standard, not troublesome, and include familiar guidelines:

  • immersion of electrical appliances in water is not allowed;
  • do not touch with wet hands, especially conductive parts, such as a plug;
  • if the device is accidentally immersed in water, before removing it, it is necessary to disconnect it from the mains;
  • the location should be dry, provide stability, minimize the risk of accidental falls;
  • for cleaning the oral cavity, it is unacceptable to use bleach or various iodine-containing solutions;
  • removable components must be original, which will save you from the unpleasant consequences of using cheap analogs, which can limit the functionality of the irrigator and harm the user.

Before cleaning, it may be necessary to disassemble the device, which will require knowledge of its construction. There is nothing complicated here, the construction includes three large blocks. This:

In addition to the main parts, an important element is a set of nozzles, which on this model of the device fit into a special compartment of the tank lid.

Disassembling the device is straightforward and intuitive even without reading the instructions. The dismantling sequence is as follows:

  1. turn off the device and wait until the mechanics come to a complete stop;
  2. disconnect the power cord from the mains;
  3. remove the top cover of the tank;
  4. remove it from the case with light effort and drain the water;
  5. remove the attachment by pressing the special button on the handle.