How cheap and beautiful to make repairs in the bathroom with your own hands

In detail: how cheap and beautiful to make repairs in the bathroom with your own hands from a real master for the site my.housecope.com.

Organizing a budget bathroom renovation with your own hands is a doable task. The correct strategy in the choice of finishing materials and a clear understanding of the progress of work will allow, even with a modest budget, to transform the bathroom without sacrificing quality.

Proper planning is the first step towards successful completion. Most of the work in the bathroom with a budget renovation can be done by hand. Even a novice master can remove old coatings, dismantle plumbing or paint.

But if experience in wall cladding with tiles is not enough, you should think about inviting specialists to certain areas of bathroom renovation. Do not overestimate your strengths and capabilities. Sometimes, reworking your own mistakes will cost more than inviting a master initially.

When the work on the renovation of the bathroom is distributed, they move on to the choice of finishing materials. It is better to refuse well-known import brands. A significant part of the cost is the payment for the brand, which looks impractical with a budget repair option. The cheapness of Chinese goods is also not the best option.

This applies to both finishing materials for the bathroom and plumbing. The combination of reasonable cost and good quality is a distinctive feature of the offered products.

An important condition for a high-quality result when doing budget repairs with your own hands is adherence to the technological process. If any stage of the work is in doubt, listen to the recommendations of specialists, improvisation is sometimes inappropriate.

Video (click to play).

Redevelopment of the bathroom automatically increases the repair estimate at times, so there is no need to talk about a budget option. Leave your ideas for moving walls or plumbing to another place until better times when there are no financial constraints.

The amount of preparatory work to remove the old cladding depends on the choice of new materials. Sometimes this stage can be avoided. Mandatory dismantling of plumbing is required if the plans are to replace it.

An economical bathroom renovation includes several wall finishes:

staining;
installation of PVC panels;
wallpapering, including self-adhesive foil;
facing with tiles from the budget segment.

Each method has undeniable advantages and some negative aspects.

Wall covering with paint is the leader among economical finishing options due to its simplicity and low cost. A competent approach to the choice of paint and high-quality preparation of the walls is the beginning of the path to success.

A project where areas near the sink and bathtub are lined with inexpensive tiles or moisture-resistant PVC panels is more efficient.

Moisture resistance and antibacterial properties are prerequisites when buying paint, otherwise it will not be possible to avoid the development of fungus and peeling of the coating in the bathroom. High performance characteristics against the background of budgetary cost are inherent in paints:

The absence of a pungent odor is a definite plus of water-based compositions, and silicone paints perfectly perform the function of a hydro-barrier. It is better to refuse the use of oil mixtures. After a short time after the renovation, the walls of the bathroom will be covered with cracks.

When carrying out an economical bathroom renovation, remember that paints with an attractive glossy effect accentuate any unevenness in the walls and make all defects more visible. Therefore, careful alignment of the walls is imperative.Plus gloss - the ability to visually increase the space of a small bathroom.

Often, during renovations, it is necessary to remove the old paint coating from the walls of the bathroom. This can be done in several ways:

use a drill with a special grinding attachment;
purchase a liquid for removing paint, in the process of work you will also need a spatula and a scraper;
use thermal methods, when the old coating is heated with a building hairdryer or a burner, and the swollen paint is cleaned off with a spatula.

Naturally, at the end of the removal process and before the start of staining, a whole range of measures is carried out: sealing cracks, eliminating protrusions, priming.

In the photo, a bathroom with a budget do-it-yourself repair:

You can repair the walls of the bathroom with PVC panels. In terms of cost, this will cost a little more than purchasing paint, but the method has two clear advantages:

The appearance of the bathroom after a budget renovation with the use of PVC panels is incomparably better in terms of design.
No careful preparation of the wall surface is required.

The panel installation process does not contain complex steps and is available for do-it-yourself. After calculating the need for material, the crate is formed. For these purposes, plastic profiles with clips are used. For an economical bathroom renovation, wooden slats are also suitable. Pre-impregnation of the material with antiseptics will protect the slats from increased moisture.

The option of repairing a bathroom using wallpaper also has a right to exist, the main thing is to choose moisture-resistant products. The work is being carried out at a fast pace, the removal of the old coating is not required in all cases. There are 3 main types of wallpaper for use in the bathroom:

Vinyl with non-woven backing. The price is quite high; repairs will require the purchase of special glue, which is not always advisable in an economy project. But high performance is the foundation of consumer popularity.
Washable. Compared to vinyl copies, they are less practical, the cost of the product is correspondingly lower.

High quality and attractive appearance of self-adhesive are accompanied by 3 negative points:

Quite high cost of the product, which may not fit into the budget repair estimate.
Bathroom walls require careful preparation, as any flaw under self-adhesive wallpaper will be extremely noticeable.
Quite a complicated application process. The painstaking process takes much longer than standard pasting.

The next photo shows a bathtub economy renovation:

Budget renovation also implies the use of tiles in wall cladding. The main thing is to choose an inexpensive product with decent quality. Solution advantages:

the material is resistant to temperature extremes;
not afraid of high humidity, withstands prolonged contact with water;
washes well;
resistant to mechanical damage.

The following negative points can become an obstacle to use in the bathroom when carrying out budget repairs:

it is additionally required to purchase a mixture for fixing on the wall and a grouting joint;
walls with old paint need preparation, the coating must be removed;
the process requires some experience and not everyone can do it with their own hands on their own, the invitation of the master will increase the estimate of the repair;
lining takes longer than wallpapering or painting.

The best option when carrying out a bathroom renovation with a budget project is to combine cladding. The area near the bath and sink is decorated with tiles, and for those less exposed to water, a simpler and more economical method of coating is chosen.

The amount of work on the budgetary finishing of the ceiling depends on its initial state. It is enough to cover a smooth surface with water-based paint or whitewash.An idle and fast process can be done by hand. It is recommended to remove significant curvature or mask bathroom communications with a suspended structure. Rack elements or PVC panels are suitable as a material.

The main advantages of the choice:

affordable price segment;
simple veneering procedure;
does not require perfect preparation of the bathroom ceiling surface;
successfully mask wires and pipes;
the possibility of installing built-in lamps is provided.

The result of a budget repair is shown in the photo:

The finishing option depends on the renovation estimate and the condition of the old bathroom flooring. Sometimes just freshening up the look of the tiles is enough. To do this, you will need to remove the grout and select a new one that matches the color of the tile.

It is quite simple and cheap to lay linoleum, but this measure will be temporary. The increased level of humidity in the bathroom provokes the development of mold on the linoleum.

Tiles are more practical when renovating a bathroom, even if they are of a budget. The cladding is carried out without dismantling the old tiles. The screed will require labor and time. To repair the bathroom floor, choose tiles with a rough texture in order to avoid slipping and not provoke injury.

With an extremely limited budget, the most economical option would be to purchase a large rubber mat, which will maximally cover the free space of the bathroom floor. It can be changed much more often than any stationary coating, and a fresh look of the interior with minimal costs will be provided.

Plumbing replacement in the case of budget repairs is not always carried out. Sometimes they stop at the option of restoring the bath. There are several ways to update:

The inner surface is finished with a two-component polyester enamel. The most budgetary reception.
Recovery with liquid acrylic is characterized by greater durability and cost.
Sometimes both methods are unacceptable due to the deplorable state of the bath. An acrylic insert will save the situation, which is fixed with a sealant.

Each of the methods still implies financial costs, although they will be incomparably lower than purchasing a new bowl.

If a budget repair involves the purchase of new plumbing in the bathroom, consider the following options:

Acrylic container. It is located at the bottom rung of the price segment. Easy installation and easy maintenance are the key benefits of a bathroom product. A short service life and instability against mechanical damage are the main negative features.
Cast iron is more practical. The cost is higher than acrylic counterparts.
Steel bathtubs by their characteristics are located between acrylic and cast iron products.
If the presence of the bath itself in the bathroom is not essential, you might think about installing a shower cabin. But the renovation will already go beyond the budget.

When replacing sinks in the bathroom, choose between equipment on hooks or on a leg. The first option is more budgetary, the second is more aesthetically pleasing, as it successfully masks communications. The nuances of choosing plumbing and the preference of a domestic manufacturer were discussed in the first section.

Small trifles are capable of embellishing the interior of a bathroom after a budget renovation. An original curtain, decorative stickers and new accessories will enliven the design of the room. Communications are not left open, they will spoil the result of even the most expensive bathroom renovation. A budget way to quickly hide functional furnishings is to form a plastic box. It will take a little time and costs, and the result will be obvious.

- putty
- dye
- putty knife
- roller
- brush
- container for water and putty
- soil
- water-based paint
- wallpaper glue

- primer;
- putty knife;
- dye;
- putty;
- plaster;
- sandpaper;
- wallpaper glue;
- wallpaper;
- brush;
- roller;
- linoleum.

To begin with, it is recommended to draw up a work plan and determine what the decoration of the premises will be. This is a very important stage, because if you forget about it, you risk choosing the wrong wallpaper or spending a lot of time rearranging furniture. A good option is to use free interior design programs: they allow you to choose a certain color scheme and arrange objects on the plan. This will help you save on designer services. When you determine what the room should be after the renovation, you can move on to planning the subsequent stages.

Dismantling old wall and floor coverings in firms is usually expensive, so it's best to do this work yourself. To remove wallpaper, linoleum, tiles, you need to spend a lot of effort, but it does not require special knowledge and skills. But if, after dismantling, you need to repair communications, fix the wiring, the best way out is to contact the master. In this case, you can save money if you have acquaintances who are able to perform such work efficiently and at the same time provide you with a discount.

If surfaces in your home are poorly aligned, choose materials that will smooth out this flaw. For example, you can use liquid wallpaper: they fill in pits and small scratches, and also create a special volumetric texture, thanks to which minor imperfections and irregularities become almost invisible. In the toilet or bathroom, you can use plastic panels - it is much easier and cheaper than hiring craftsmen to carefully align the walls and lay the tiles.

Some of the finishing materials can be bought at a sale. Of course, this significantly reduces the possibilities in the choice of goods, but it allows you to save money. It will be great if you can get the materials you need at a discount. If not, visit a few home improvement stores, look at prices, and choose the best options.

By the way, it's worth remembering an important thing: it's not always appropriate to buy everything in one store. For example, an establishment might sell wallpaper cheaply and still charge a high price for flooring or paint, expecting a customer to buy it all at once. Please also note that some manufacturers overcharge the price, while the client overpays not for quality, but for the brand. An experienced technician will advise you on how to choose the right products for your renovation.

Finally, in order for the repairs to be done efficiently, some work that you obviously cannot cope with yourself, it is better to trust the specialists. This will save you time, as well as money that you could spend on correcting your own mistakes and re-buying materials.

Even with a small budget, you can make a beautiful and practical bathroom. When purchasing a new home or a long stay in the old one, it becomes necessary to renovate it. Any updates involve costs that even the most economical person cannot always afford. In the absence of a significant amount of money, it is not at all necessary to postpone the replacement of damaged finishes on the back burner. It would be wiser to plan budget repairs using inexpensive but high quality materials. And you should start with the bathroom, which is one of the most important rooms in the house.

Repair, like any change, begins with getting rid of the old and unnecessary. And this process can be called the most pleasant and easiest part of the work: coverings that have outlived their days can be safely removed from the walls and ceiling without worrying about their safety.

The cleaning of the premises is carried out in several stages:

Disconnecting plumbing;
Removing old coatings from walls, floors and ceilings;
Removal of old layers of plaster, screed and waterproofing residues;
Cleansing the room from dirt and dust.

When planning to make repairs in the bathroom, the first step is to choose a finishing material for the floor and walls.

After getting rid of debris, all surfaces must be leveled with cement mortar. It is imperative to seal the cracks with a sealant.

An obligatory step is waterproofing the room. For the floor, you can use a plaster, which is applied to the screed in one or two layers.

The bathroom is characterized by a special microclimate, which leads to the rapid deterioration of materials. Therefore, making even a low-budget repair, it is worth choosing a finish whose performance meets the requirements.

The materials used must have the following properties:

Resistant to high humidity;
The presence of antiseptic additives that prevent the appearance of fungus and mold;
Resistant to aggressive compounds used to clean the bathroom;
Ease of care.

When buying materials for a bathroom, you should ask the seller for a certificate confirming their quality.

Ideal for a bathroom - smooth surfaces. Due to the absence of irregularities and various volumetric patterns, the material does not accumulate dirt on itself, retaining its original appearance for many years.

When choosing a finish, you should also pay attention to the possibility of self-assembly. A simple DIY repair will require less costs (approximately twice).

A significant part of the cost falls on the design of the walls, which have the largest area when compared with the rest of the surfaces being trimmed. One of the options for the "economy" class is wallpaper, but before you paste over the bathroom, you should think carefully. This type of finish is very unstable to high humidity in the room.

Painting with a water-repellent emulsion is the cheapest way to decorate walls. For finishing, a special compound on a polyester or acrylic base is used, which is applied to the surface after it has been leveled. The paint lasts for 5 - 8 years.

In the bathroom, you need to choose tiles of such a color and texture so that it is harmoniously combined with other finishing materials and pieces of furniture.

Among the budget options, the following types of finishes also have the necessary properties:

Plastic panels;
Ceramic tile.

PVC panels are an inexpensive material that saves not only finances, but also time. Plastic strips, fastened together, do not require preliminary leveling of the walls and removal of old finishes. Installation of panels is done quickly and will be within the power of even a non-professional.

If you want to design a small bath inexpensively, you can also consider laying wall tiles. This material is resistant to moisture and mechanical damage, has a huge number of colors. The tiled bathroom looks nice and tidy. A small budget in this case will not be a problem: you can buy domestic products, which have more affordable prices.

The ceiling can be decorated in the same way as the walls. For example, paint with white paint or install plastic panels. This option is the most economical and practical.

For a small bathroom, the installation of a stretch fabric can be an ideal solution. The cost of such finishing depends on the area of the room, so the installation of a false ceiling in a small toilet will be cheaper than the other options. Especially if you abandon the idea of a designer canvas and make a matte white.

PVC panels are well suited as a finishing material for the ceiling.

Finishing the floor is the most important task on which the safety of the use of all plumbing depends. That is why experts recommend first of all to update the waterproofing in the room, and only then to repair the coating itself.

For finishing the bathroom floor, two materials are suitable that have high durability and a variety of designs:

Linoleum will cost less than tiles, but if we are talking about a small bathroom or toilet, there will not be much difference in their cost. Therefore, the choice of coverage in this case depends on personal preference. However, it should be borne in mind that the installation of linoleum is quite simple and done by hand, which also significantly reduces costs. Having given preference to tiles, you will have to work hard with laying it. Or finish the floor with the help of a specialist.

Buying bathtubs and sinks is the biggest expense in a renovation. However, you can save money in this case too. The solution to the problem will not be the purchase of new equipment, but the restoration of the old one.

If the bathroom is small, then when decorating it, it is worth using materials and furniture of light shades.

The update is carried out in two ways:

Application of two-component polyester enamel on the inner surface of the bath (the cheapest option);
Restoration with liquid acrylic (it will cost more, but the result will be more durable and beautiful).

If the bathtub is in a completely deplorable state, you can purchase an acrylic insert. This is a special insert that is attached to the inside of the bowl with a sealant.

The listed methods may not seem budgetary, because are not very cheap. However, in any case, it will be more profitable to restore an old bathtub than to buy a new one.

Self-repair of the bathroom can be done with almost any income. It is only important to carefully plan the entire process and purchase the necessary materials. The modern market offers a variety of finishes, so it will not be difficult to choose a high-quality coating of low cost. The main thing is not to get carried away, trying to save as much as possible: you need to pay attention not only to the price of the material, but also to its properties.It is not for nothing that the proverb “A cheap fish is a bad ear” exists among the people. You and I need to find a middle ground so that the repair in the bathroom turns out to be excellent, and we had to pay for it at a minimum. This article will consider budgetary and at the same time successful repair options for a small-sized bathroom.Before proceeding with the decoration of the walls and floor, you and I need to find out in what state the bathroom room is. Do the walls need to be aligned? Leave the floor in the same condition or do it a little tweak? What is the condition of the ceiling? After evaluating the premises, we draw up a specific work plan and begin its phased implementation.Do not forget that we are very limited in the area of the premises. This is not a royal mansion, but a compact room, which was built in the era of Nikita Khrushchev or even earlier. This means that for wall decoration we will choose methods that “steal” the already modest space in the room to a minimum.

Tip 1. It is better to cover the walls in the bathroom with plaster than sheathe them with some kind of drywall.

Tip 2. What to choose: tiles or wall panels? Of course, the first option, since the panels take up a lot of free space, which is already lacking.

Of course, each case is different. If you are planning a major overhaul and want a nice bathroom, you can sacrifice free space.To begin with, you and I need to clean the walls from the old finish. If this is an old tile, the easiest way is to knock it down with a perforator, although you can do with the old old-fashioned way, picking up a chisel. The paint is well cleaned off with a special brush with a metal bristle.After removing the finish, we feel free to move on to replacing all communications. We will not dwell on this aspect in detail. We only note that after it you start leveling the walls (if necessary). Of course, there is also a more economical option - to sheathe the bathroom walls with some kind of moisture-resistant plasterboard. Alternatively, you can try cement slabs. Just remember to treat the wall with a good antifungal agent.Painting the wallsThis finishing method is the least expensive. In principle, everything is simple here - they chose paint, applied it to the walls, and waited for a while. Even if the paint is not ordinary, but textured, it will still be inexpensive. Wall cladding with tiles or paneling is much more expensive.Perhaps the only drawback of painting the walls in the bathroom is the final result. He is not even an amateur, he is a rare gourmet. By the way, if you decide to paint the walls, you will need to align them very well, since any curvature will be very noticeable.Summarize. Painting the walls is the cheapest way to renovate a bathroom. It can be recommended to people who operate on a limited budget or are fans of minimalism.Wall claddingWall panels are sometimes referred to as plastic clapboard. This name is quite understandable. Plastic panels for wall decoration will be offered to you in any, even a small hardware store. The economical option is white, the panels are more expensively laminated on the outside. Their cost is not too different from natural wood.The plating process is as follows. The panels are mounted on a frame, which is a wooden beam. Before that, it is treated with all kinds of means: antifungal, water-repellent, bactericidal. This helps prevent rotting. The frame is attached to the walls by means of dowels.Wall panels are glued using "liquid nails", they are easily connected to each other into a lock.By the way, you can hide a couple of massive boards under the plastic. It is very convenient to screw in the fasteners of the numerous shelves and cabinets that you will hang in the bathroom.To summarize, bathroom wall paneling will cost you a little more. Another drawback is that it takes away free space in the room. However, this material looks much better than ordinary painting.Wall cladding with tilesThis finishing method is considered the most practical. Here's a quick step-by-step guide:

First, markings are applied to the wall to determine the vertical and horizontal lines. Required tools: plumb line, level of sufficient length.

Tile adhesive is applied to a flat wall. To do this, you can use a spatula or a special grater.

Grooves will need to be formed on the adhesive composition. They must be of the same depth.

The tile is applied to the glue layer, pressed by hand as tightly as possible. In this way, 3-4 tiles can be laid. After that, it is better to pick up the level and once again check how correctly and evenly the material was laid. Mistakes made at an early stage of installation are much easier to correct than trying to do it at the end of the repair.

The final stage of finishing will be the grouting of the joints between the tiles. To do this, you will need to purchase a special composition at a hardware store.

If you renovate the floor from the beginning, you will need to remove the old material. The ancient screed and trim are removed with a hammer drill. Waterproofing materials are laid on top of the cleaned substrate. A new screed is poured from above.The most economical and simple coating option is linoleum. Today this material is relatively inexpensive and practical. It is not afraid of moisture, it can be easily replaced in case of damage. In addition, if linoleum was laid in the kitchen or in the hall, you probably still have a couple of squares left. You can safely take it and put it in the bathroom.Of course, the ideal is to buy a waterproof laminate flooring. Its modern versions are not afraid of moisture and do not swell.As in the case of the walls, ceramic tiles have been and remain unchanged classics here. But even here you can easily save money. Just don't buy oversized tiles - you end up with a lot of unnecessary waste.Of course, it is quite difficult to calculate absolutely everything. But we know the approximate prices for the services of the repair teams:

Removing old plaster - 500-600 rubles

Plaster, leveling the walls (from 450 rubles per square meter)

Laying tiles - about 400-500 rubles per square meter.

Floor screed - the same amount.

Prices are indicated without the cost of the materials themselves. By the most conservative estimates, renovating a bathroom from scratch will cost you 150 thousand ($ 3500- $ 4000) if done from scratch, including replacing the door and wiring. It's great if a person has even hands and at least part of the work he can do on his own. Then the repair really turns out to be economical, really cheap.The video briefly and clearly indicates the points where you can save a lot when renovating a bathroom.In a crisis, I especially want to save on repairs, but the requests remain the same: beautiful, original, exquisite. Like any other renovation, wall and floor decoration in the bathroom has its own nuances. Take them into account at the planning stage - and you can save more than one thousand rubles, and all the work will be completed on time.The bathroom is, first of all, the place where you can relax and pamper yourself with hygiene and beauty treatments. Therefore, its beautiful and comfortable arrangement is a matter of paramount importance! We have collected for you 31 bathroom ideas that will not cost you a pretty penny and will delight the eye for years to come!In order to create your dream curtain, which would perfectly match your bathroom interior, you only need a simple cotton fabric, acrylic paints and a little imagination!Make your morning trip to the sink a lot more enjoyable. All you need is yarn and a simple rug base.Use small, cute containers. Not bulky plastic bottles!It will allow you to save space on the table, and it will be very easy for you to keep order there.This bar will make your shower more comfortable than a straight bar.The double-panel shower curtain will make your bathroom look more luxurious. If you have a small tub, you can simply cut the curtain in half and hem the edges. Easy peasy!Nice little thing: this piece of furniture is very mobile, and you will not need to drill holes in the walls.In addition to being very convenient, and hanging things dry much better.All you need is a rubber mat (with drainage holes), waterproof sealant, and smooth stones. Image - How cheap and beautiful to make repairs in the bathroom with your own hands

With the right approach, you can make an excellent and very inexpensive bathroom renovation. The secret is in the choice of materials and the independent execution of most of the work. What options are there and what nuances should be taken into account when renovating a bathroom on a budget?

Among the most budget materials for decorating the walls of the bathroom, there are:

paint;
PVC wall panels;
self-adhesive film;
inexpensive tiles.

The last option is the most practical. The tile can withstand temperature extremes, mechanical shock, is durable, looks aesthetically pleasing and is easy to clean, incl. with detergents. But first you need to prepare the walls: remove the old coating, treat with fungicides, if necessary, level.

Tile glue, which is not worth saving on, and grout for joints will be added to the total costs. If it is difficult to lay tiles on your own, then the services of an invited worker will increase the cost of repairs. In order to save money, only the wall section can be tiled, to which the bathtub and sink are adjacent. (make an apron), and paint or wallpaper the rest.

The easiest thing to do in terms of work is painting the walls. Both a man and a woman can handle this. But the paint is selected special, taking into account high humidity and temperature extremes.

Usually it is oil or acrylic. The walls themselves must be plastered. The paint layer is not thick enough to hide any bumps and cracks.

Another lightweight and inexpensive finish is self-adhesive film... Its other name is self-adhesive wallpaper, but it is also called vinyl wallpaper impregnated with glue.The latter are more expensive, but in comparison with similar vinyl wallpaper without impregnation, they come out cheaper. Self-adhesive film is not afraid of moisture, has a wide choice of colors, already contains glue. It remains only to glue it to a flat wall. If the surface is not prepared, then all the irregularities will become even more noticeable. There is no need to wait for the glue to dry.

And the last stuff - PVC panels or lining... Cheap material, easy to install, well hides the imperfections of the walls, is not afraid of moisture and decay. But it is easily deformed, does not withstand strong impacts, very cheap plastic can have an unpleasant odor and release harmful substances. A frame and fasteners are additionally purchased for the panels.

Among the budget materials for the floor, there are linoleum and inexpensive tiles.

Linoleum is best viewed as a temporary option if it is not possible to carry out a full repair. Due to constant contact with moisture, mold will grow under it over time. Therefore, it is better to choose without a base or monogenic.

In this respect tile is the most practical. But you will need to dismantle the old coating, leveling screed, tile adhesive, grout and cross-separators. Whereas a sheet of linoleum can be laid on top of the old flooring. Paying for the services of a tiler will increase costs if you do not want to install the tiles yourself.

It is recommended to choose a tile for a floor with a texture or rough. This will prevent slipping on wet floors.

If the ceiling is fairly flat without flaws, then it can paint with matt waterproof paint, light water-based paint or just whiten. The new white ceiling will immediately refresh the entire room. The work itself is not difficult, and whitewash paint is not expensive.

If the ceiling is curved or pipes pass, then it can be hidden behind a suspended ceiling made of plastic slats or panels.

This method has many advantages:

price, ease of installation;
convenient for installing lamps;
panels will hide all communications and shortcomings.

Does not require preliminary preparation of the ceiling in the form of alignment, etc.

The cheapest option for a bath - acrylic. It is cheaper than cast iron, but it is easier to install and unpretentious to maintain. The service life is short, but replacement often coincides with a new repair. A good choice for families with small children, as it is not as traumatic when dropped as cast iron. But he doesn't like pets' claws.

You can pay attention to the size. The smaller the bathtub, the cheaper.

If cast iron bathtub whole, everyone is satisfied, but the appearance is not pleasant (the enamel has turned yellow and cracked), then you can cover it with liquid acrylic. Externally, the bathtub will be completely transformed, and the coating will come out cheaper than replacing the bathtub along with dismantling and installation work.

When the opportunity to soak in the bath is not a matter of principle, it can be replace with a compact shower... Some models have a high base that doubles as a small bath.

The issue with the sink is a separate issue. The first time you can do without it.

There are two types:

The first option is cheaper, the second is more reliable and hides communications. However, if you build a cabinet on hooks under the sink, it will not only hide the pipes, but also household chemicals. The latter can also be stored under the bathroom, if you build a plastic screen.

For the toilet, as well as for the sink, it is recommended to choose faience domestic production. It is cheaper than porcelain, but generally no worse.

If the walls were painted with oil paint, then it must be knocked down. Otherwise, the plaster on such a surface will fall badly and will not last long.

If it is not possible to replace the floor, the cover can be hidden under a large rubber mat. It is easy to match it to the color of the interior and, if necessary, replace it. At the same time, it will perfectly hide all the flaws in the floor. The difference from linoleum is that the rug can be periodically cleaned, washed, and the floor itself will be ventilated.

After dismantling the old floor, it is recommended to install waterproofing.She perfectly restrains the average "flood", which in the future will save you from litigation with neighbors below and compensation for damage. The issue of waterproofing in panel houses is especially relevant.

If the pipes are old with a coating of rust, then it is preferable to replace them. You can use plastic, they are cheaper, but it is better not to save on valves and valves and take high-quality ones.

Protruding pipes spoil even an expensive interior. They can be hidden in a plastic box - cheap, aesthetically pleasing, there is easy access to communications. Alternatively, the vertical pipes can be hidden in a pencil case, which will simultaneously serve to store bit chemistry or rags and a mop.

If you plan to replace the plumbing, it is recommended that you first install the bathtub, and start repairing the walls. This will reduce the risk of water leaking between the wall and the bathroom. The latter can become a support for the first row of ceramic tiles.

If you need to relocate a luminaire or install additional light sources, be sure to invite an electrician. These are just the jobs that are best trusted by a specialist.

The mixer can be purchased cheap. The service life depends on the quality of the water, but on average it is 1-3 years.

Since the renovation is budgetary, the bathroom itself will look simple. Special decorative wall stickers, an original curtain, shelves, new towels, soap dishes and other accessories will revive the interior.

Most of the cost of expensive imported sanitary ware and building materials comes from brand fees. Cheap Turkey and China are also worth giving up: this is the case when you have to pay twice for stinginess. Manufacturers from Russia, Poland, Bulgaria and Slovenia offer certified products of good quality and at an average price.
Half, and sometimes more, of all repair costs are workers' pay. There is some work that you can do yourself, for example, dismantling old tiles or painting walls. This way you can save a lot.
And the third secret is planning your upcoming expenses in detail. It's easy to go over budget without a budget. Take a “march” through the hardware stores. You will be better guided by prices, assortment and promotions. Compare prices with online stores. Check the delivery terms (terms, price) immediately.
The more detailed and accurate the costs are, the easier it is to organize such a repair so that it can easily fit into the desired budget. In this case, be sure to lay + 10% for unforeseen expenses.

Video (click to play).

If you wander around the new buildings, you can find a great new sink for free! Some newcomers, starting repairs, install other plumbing, and throw a completely new one from the developer in the trash.