How to make repairs in an old house inexpensively with your own hands

Few people have the opportunity to order turnkey renovations and spend large sums on finishing the apartment. Fortunately, today there are many ways to save money on renovation repairs by doing it yourself. In this article, we have selected the best recommendations for those who want to make inexpensive but high-quality repairs at home.

The budgetary renovation mainly includes finishing works, ceiling and floor renovation. If the estimate allows, windows, interior doors, and plumbing elements are also subject to replacement. It is not recommended to make major changes in the space of the apartment in the mode of saving money. Such work should be carried out by professional craftsmen with experience in repair work, otherwise there is a risk of spoiling the appearance of the room, making mistakes in calculations or running into low-quality building materials.

How to make an inexpensive DIY repair? First you need to determine what work will need to be done in the process. The standard stages of a budget room decoration are as follows:

• Drawing up a work plan and estimates based on your budget;
• Selection of building materials;
• Preparing the room for renovation work;
• Rough wall decoration and floor filling (if work is being carried out in a new apartment);
• Wallpaper gluing, flooring installation, ceiling decoration;
• Arrangement of furniture, lamps, decor elements.

As you can see, all these works can be done independently, with a little skills in the field of construction and repair.

Following the instructions above, repairs should begin with an estimate and selection of suitable building materials. An estimate should be drawn up sequentially for the decoration of each room and for a specific type of work. You should not buy materials with the hope that they will someday come in handy - you should proceed solely from the repair plan and budget.

The first stage of the renovation also includes the release of the future room from furniture, decor elements and part of the decoration. Nothing should remain in the room that will interfere underfoot or deteriorate during repairs. If old wallpaper hangs in the room, it is necessary to remove them and carry out preparatory measures for finishing the walls, the same applies to the floor and ceilings.

When purchasing building materials, do not limit yourself to visiting one store - you should take into account all the inexpensive centers in your city. The assortment in them can be strikingly different, as well as the prices for the same type of product. Of course, in case of budget repairs, it is better to turn to the most advantageous offers. You can greatly facilitate your task and save money by ordering building materials in online stores with delivery.

When choosing budget building materials, it is worth remembering one rule: what looks expensive is not always of high quality. You shouldn't buy cheap materials that imitate wood, stone or tiles just because of their appearance. It is imperative to pay attention to the technical and operational characteristics of the goods.

The decoration in different rooms of the house has its own characteristics. Therefore, before starting the repair, you need to decide which rooms are in particular need of updating the appearance. In the living room, bedroom, nursery and hallway, inexpensive DIY repairs can include the following types of work:

• Plaster and wall plaster;
• Pasting new wallpapers;
• Wall painting;
• Assembly or installation of flooring;
• Ceiling decoration.

In the kitchen and in the bathroom, finishing work also includes:

• Floor and wall decoration with ceramic tiles;
• Surface treatment with water-repellent compounds.

Here we have listed those types of repair activities that you can carry out on your own with some construction skills. However, it is often necessary to do such work indoors, which should be handed over to professional craftsmen:

• installation of suspended ceilings;
• replacement of plastic windows;
• repair of electrical and plumbing.

Although the listed works cannot be classified as economical (due to the use of additional labor and building materials), if necessary, they can also be carried out as part of an inexpensive repair.

In addition to giving up complex installation work and saving on building materials, there are other tricks that will help reduce the cost of repairing an apartment. At the same time, the decoration and the interior will have an excellent appearance.

Still think that a budget do-it-yourself finishing option cannot look stylish and expensive? In our gallery, we have selected photos of inexpensive repairs, which convincingly prove the opposite.

If you want to better understand how to make inexpensive repairs in an apartment in practice, we suggest watching a video with the process of finishing work on a real object.

Making repairs on a limited budget with your own hands is quite difficult, but doable. The main thing is not to be afraid of bold decisions, to use modern and high-quality materials, to act according to the plan. And thanks to the tips listed above, you can reduce the estimate for expensive repairs.

When changing your life for the better, you should start with yourself, your environment, goals, ideals, but it is important to make changes in your own home. A beautiful, comfortable, cozy house is a guarantee of a good mood, positive emotions, and spiritual harmony. Therefore, you should not be afraid to start changes in the apartment, even in the absence of financial capabilities. Repair is indeed very costly, but having organized it correctly, the result is always justified. The main thing is desire and hands.

Prices on the construction goods market have been biting lately, but with a competent approach to business, cost planning, it is easy to avoid overpayments and purchase high-quality materials. Having planned the repair work in the apartment, you should initially carefully consider the sequence of actions. Initially, you need to decide on the following nuances.

1. The whole apartment will be subject to change, or maybe a separate room?
2. With what "scope" to re-glue boring wallpaper, change linoleum or change electrical wiring, heating, make other global changes?
3. How to replace old furniture, is there an opportunity to restore it on your own?
4. Where can I get ideas for updating the interior design, ways to bring them to life with minimal financial costs?

To repair even one room a year is already progress

Often, a budget renovation implies a gradual transformation of each individual room. For the case when apartment owners live on one salary, this is ideal. To repair even one room a year is already progress, do not despair when there is no financial opportunity to carry out repairs quickly.

Starting such an important matter as a budget apartment renovation with your own hands, it is worth very meticulously assessing the state of electrical wiring, water supply, sewerage, heating. After making sure that everything is fine with these communications, you can proceed to assessing the premises themselves. As a rule, the following elements of the apartment are subject to alteration.

1. Walls - initially, they carefully study the state of the rough plaster, if it is strong, does not crumble, that is, there are two ways to renew them.
2. Decorating for wallpaper - when the walls have already been pasted over with wallpaper a little easier, you just need to qualitatively remove the old ones, prime the walls and glue the new ones. If the base is uneven, you will have to putty the walls or sheathe them with drywall.

Preparing the wall for wallpapering
Finishing for painting - the base should be perfectly flat, it is very difficult to hide flaws under a layer of paint, so you should pay maximum attention to preparing the base.

when the walls have already been pasted over with wallpaper a little easier, you should only remove the old ones with high quality
The floor is usually wooden. Here they proceed from his condition. If it is normal, and it is planned to lay linoleum on top of the floor, there is absolutely no need to prepare it additionally. When there are creaks, the floor is cold or squeezed, it should be leveled, and at the same time insulated with ordinary sheets of OSB-plates, plywood, fiberboard. Updating the option, when the floor is already covered with linoleum, its condition is satisfactory, you can simply paint boring linoleum in a stylish print, there is an incredible assortment of paints and varnishes.

Linoleum is usually placed on the floor. It can be painted in a different color or printed.

Ceiling - this part of the room should be even and beautiful, since the most imperceptible flaw on it will become a huge problem. After making sure that it is even, you can paint it with water dispersion paint or paste over with wallpaper, otherwise it is cheaper to order a stretch ceiling. Today, the price of stretch ceilings is quite affordable, and the excellent appearance, the absence of unnecessary labor costs for its installation, simply do not leave it with competitors.

The best option would be to make a stretch ceiling

When starting work, be sure to take into account the following important steps that will need to be taken.

1. Decide on the design, materials, working hands.
2. Draw up a thorough, complete list of required building materials.
3. Examine prices, find the most inexpensive store.

You need to prepare carefully for repairs. It is worth forecasting the budget

Remove unnecessary items from the room, remove old bases from the walls, floor, ceiling.

Before painting anything, it is worth taking care of an overnight stay outside the home for a family in advance, paint and varnish products are very unsafe for people, especially children.

You can paint the walls yourself

Find a specialist who will take on those jobs that you cannot cope with on your own.

Purchase building materials and start work directly.

You can hire a master for those works that you can't handle yourself.

It is a mistake to think that the renovation of the premises begins with the ceiling, it should take its proper form last. You can start from the walls or the floor, depending on what you need to pay more attention to.

The bathroom requires a responsible approach; often, in the absence of good ventilation, it is here that such a hateful mold appears. To prevent this from happening, you should definitely check the ventilation, if it is completely absent, you need to install it. The most popular material for bathroom wall and floor cladding for many years has been ceramic tiles and their derivatives. It costs differently, it is quite possible to find a budget option, as a last resort, you can always take plastic (lining). It washes well, does not absorb moisture, is easy to install, but it “ages” a little faster. If you plan everything carefully, it is not at all difficult to carry out a budget repair of an apartment with your own hands.

Bathroom renovations should be handled responsibly

Thanks to the availability of the Internet, you can find a lot of options for ideas for the decorative transformation of your home. The main thing is not to miss something that can be given a second life. For example, decorating the doors of an old wardrobe with inexpensive full-length mirrors, it will definitely not be worse than modern wardrobes. Apply mosaic, decoupage to the glass doors of Soviet cabinets, sideboards, or paint them in bright, juicy colors, paste over with self-adhesive tape. All this is quite affordable.

An example of restoration of an old cabinet

When there are many things or items on the farm that need to be kept away from prying eyes, you need to build a so-called wardrobe yourself, simply by attaching sheets of chipboard, OSB plates to special corners, and hide numerous shelves behind fabric screens of interesting colors or prints. An exquisite option is very fashionable today - to decorate a hall or bedroom with "wicker" curtains. It is easy to make them, there are many instructions on the Internet.

When transforming your own home, you should always remember, getting rid of the old, life will surely be filled with something new and wonderful, and order will reign in all its spheres!

Fast and inexpensive DIY home repairs

Renovation is a sore subject for most owners of country houses and apartments. It often takes a lot of investment and effort to give rooms a stylish, modern look. Do not know, how to make repairs in an apartment do it yourself inexpensive and fast? Replacing windows, painting the ceiling, re-wallpapering, flooring - all this can be done quickly and inexpensively without assistance. With the right choice of materials and a little more effort, you can make a high-quality and beautiful renovation with modern finishes.

The site that requires the participation of a specialist if repair or replacement is necessary is electricity. The most economical option in this case is to call a specialist. Installation of sockets in the apartment can be carried out without his help. A tool for repairing an apartment is the cheapest one to rent.

Photo of inexpensive ceiling repair

Before starting an inexpensive repair, first of all, a suitable design is determined and a plan is made. The best time for renovation is autumn. In warm weather, facade work is carried out, and interior work is carried out with open windows.

In addition, prices for material are always reduced by 15% by autumn. Many materials, such as putty, plaster, sealant, assembly glue, leveling screed, have a limited shelf life, and the store sells it at a big discount by the fall.

Photo of inexpensive room renovation

If you need to replace the old plumbing with a quick repair, you can try to restore the old one, but if this is not possible due to significant damage, chips, you can buy plumbing from your hands. Many newcomers in apartment buildings change new equipment immediately after moving in, and the equipment, going to the landfill, is sold by the employees of this organization at a bargain price.

Photo of a bathroom before an inexpensive renovation

Removal of construction packaging, garbage is a rather costly repair item in an apartment, but if you wish, you can take everything in bags to the nearest trash can.

Plywood, beams, slats, boards can be bought on the building materials market. Sheathing slats can be taken unplaned. The croaker is bought raw in advance and dried. By the fall, this material, when purchased in the spring, dries up completely. Plywood of the required thickness can be taken from waste packaging material (containers). The material can be waterproofed with two buckets of PVA-based putty.

Photo of inexpensive bathroom renovation

The floor is covered with plastic. The temperature should not drop below thirteen degrees. The sheet is laid out. Putty is poured into the center and accelerated to the ends with a paint brush. The plywood sheet is closed with plastic, another sheet is laid, the puttying process is repeated until all the sheets are covered.

Photo of inexpensive renovation in the house

Oppression is placed on a stack of putty plywood (over the entire surface). After a week, the sheets are turned over and putty on the other side, then they are also pressed. After two weeks, you can use moisture resistant plywood. Thick timber, boards can also be taken from disassembled containers, pallets. An inexpensive option for finishing walls and ceilings is surface cladding with laminate, MDF.

Nice and inexpensive bathroom renovation

If the lathing is done with a crochet lathing made of wood, there is practically no need to level the surface. Wall cladding in the apartment can be done at chest or belt level, the remaining space can be trimmed inexpensively and quickly with non-woven wallpaper.

An economical type of flooring in an apartment is marmoleum. This material is not suitable for damp rooms. For a bath, toilet, any tile option is used. When using a laminate, the floor needs to be leveled before laying. For the walls in the bathroom, you can use laminated hardboard.

Photo of inexpensive flooring in the apartment

If it is necessary to insulate, glaze the balcony, this is done in the spring. The outer part is sheathed with siding. The inner part is finished with plywood covered with self-adhesive foil. Wooden frames are used for the windows, which you can install yourself. Windows are purchased in early spring, installation closer to summer.

How to start an inexpensive renovation

The doors can be simply upgraded. The door is sheathed with moisture-resistant plywood on both sides. Plywood is glued to the removed door using assembly glue, then everything is placed under pressure. Before gluing the sheets, the old cladding is removed from the door. After that, the door in the apartment is pasted over with self-adhesive under the wood, varnished. The slopes are covered with the same plywood.

Old plumbing is inexpensively cleaned of contamination with acetic acid and washing powder. For stubborn stains, hydrochloric (technical) acid is used for quick removal. Cracked tiles are fairly easy to repair. First it is cleaned with pemolux and vinegar.

The edges are closed with masking tape. Seams are painted with two layers (from a spray gun) nitro paint. Splashes, drips are removed with a solvent, the tape is removed.

Photo of a beautiful inexpensive bedroom renovation

After cleaning, tiles and joints are sprayed with silicone grease (liquid) from a spray can. The lubricant is applied until it no longer absorbs. After three days, the silicone surface is wiped with vinegar. A cast iron bath can get a second life after painting with an epoxy or acrylic compound. The heated towel rail in the bathtub is smoothed to a metal surface and covered with a compound.

Useful article: DIY liquid wallpaper, paper making

Before repairing, it is better to look at the photo, then make a plan and get to work. You can also give the apartment an attractive appearance with the help of inexpensive repairs, which are done quickly enough.

1. A good mine with a bad game.

Silk made from 100% polyester. Tiles “like stone”, linoleum “like parquet”, laminate “like onyx”, “Trekhgorka” like Ralph Lauren. Porcelain stoneware "python". There is something "artificially aged" ... It's embarrassing to even think about it. Alas, the number will not work. Flip through good interior magazines. There, everywhere, stone is stone, tiles are nothing more than tiles, and wood is just that tree. If you don't have the money for parquet, and plain laminate is beneath your dignity, look for a good engineered plank. The result is a floor that looks much more expensive than the money spent on it. Cement tiles are a good alternative to porcelain stoneware for kitchens, bathrooms and hallways. The result will look a hundredfold more expensive.

2. Leave the ceiling alone.

Everyone has become obsessed with ceilings! If you think sensibly, riveting attention to the ceiling, you only remind everyone of its existence. And according to its height. Ceilings two-sixty high will not turn, even if they crack, into majestic vaults melting somewhere in the unthinkable heights. This cannot be, no matter what "decorator's tricks" promise you. Just accept it. Tall doorways can do much more for your home than a ridiculous five-layer neon-lit ceiling. Let the interior doors be two, say, twenty high. And lower the door handles a little, by five to seven centimeters.By taking a non-standard approach, you will be pleasantly surprised by the result.

3. When choosing paint for walls, think about the movement of color around the house.

Adjacent spaces should contrast. If you have a bright living room, paint the hallway a deep, relatively dark color. The cost of the paint will be the same anyway, and the result can look really expensive.

4. Buy modular laminate cabinets from a store, and order the doors for them in a good carpentry workshop.

This will give you significant savings that, however, no one will ever notice. The same is true for kitchen furnishings.

5. If you nevertheless purchase ready-made cabinet furniture, let the veneering of the facades be dark and the panels of the doors simple (rectangular).

Remember, light wood always looks cheaper. Avoid yellowish and reddish veneers. And, saving on the furniture itself, spend on good handles!

6. If you don't have the money for a good carpet, look for a viscose carpet or mixed fibers, imitating a silk or wool pile carpet.

Choose the color and texture that suits you and order a piece of the size you need. For additional little money, its edges are swept with braid.

7. Place the curtains on a thick lining.

Even an inexpensive curtain fabric will greatly benefit from this. Look for fabrics that are 3 meters wide. This provides significant savings. If you are not ready to spend a lot, give up printed textiles (fabrics with a pattern). When cutting fabrics with a pattern, due to the need to properly dock the canvases, a lot of scraps remain. The more rapport, the more waste. Do not use curtain tapes for curtains. Have the seamstress fold in the "hand" folds. It's not that expensive, and the lace-up pleats look very cheap.

8. Set-headset-kit. Identical things in the interior are permissible only in one case: if they are paired things that form a symmetrical composition. Leave chandeliers, table lamps and sconces from one set to those to whom God did not give imagination. They also get sets of upholstered furniture "sofa-two armchairs" and similar tender sadness. For details, see the next paragraph.

9. Ready-made solutions.

Bad news: none. At least for us. The shower room is erected in a building way because it is a room. If you don't run a student hostel or an underground striptease massage parlor, a shower cubicle (it's a sad structure of yellow acrylic and skewed doors) won't work for you. Don't splurge on designer plumbing. Let the appearance of the bathroom fittings (kitchen, bathroom) be dictated by the function. Buy washbasins and faucets with simple shapes, without inappropriate decor. The toilet should be invisible and do its job. Nobody will admire him, right?

10. Paintings, prints, prints, photographs and posters frame in simple but deep frames with glass and always in mat.

Even a picture printed on a home inkjet printer (or a naive child's drawing) looks very significant in such a frame. Play with the dimensions of the mat. Small work in a very wide mat looks very "designer". And by the way, cardboard for a mat can be of almost any color.

11. Comfort. Another collective fetish.

According to my observations, what is called "comfort" in our Palestinians is, in 99 percent of cases, poetic tightness. In many ways, this is a bodily memory of a bygone childhood, of a warm and affectionate meager Soviet life with carpets teeming with saprophytes, a kind grandmother, Czechoslovakian crystal and an unreadable Dreiser in the polished Polish wall "Hanka". All the more comfort will not be added by the expensive devilry such as a round bed with music and a minibar, a bar counter with a built-in aquarium, etc. The same is true of such rich things as a lambrequin, a garland and a swag.Do not worry: in a good, thoughtful interior, comfort inevitably comes naturally. So…

12.… Goodbye, Sera the gypsy!

Duvet covers made of coarse calico in fine Nefertiti, towels in scarlet roses, "ripped-eyed" shades of pillow cases, nylon blankets with Shanghai leopards. All these are attributes of collective farm chic, forgive me for being straightforward. They will not add comfort. Coloring is often necessary for these items solely to hide their extremely lousy quality. Keep linens and bath towels just white (options: ivory, ecru). But from the finest Egyptian cotton.

13. However, with ivory it is also important not to overdo it.

Peach, beige, sand ... The average nuance is good for chain hotels. Because their stenciled interiors are bound to please everyone. You should like your interior. After all, he is a manifestation of your essence, right? Take in your hand the palette fan of any paint manufacturer. Do you feel a pleasant weight? These are your opportunities. Don't miss them!

This is how it looked before the renovation. Rotten wooden frames, closed from the outside with a double film, from cold and wind. To the left is an old veranda with a drooping porch canopy.

For those who have to make repairs in their home, it appears.

These were the windows and sills.

They began to put the house in order from the foundation.

One by one, we open the corners of the house, remove the rotten logs of the crowns using a chainsaw, put the formwork, put large stones and rubble, lay the reinforcement so that its ends remain open (for later fastening it to the pouring foundation), we wrap the log of the crown with roofing paper and fill it with concrete. ready-made curbstone.

And so all four corners of the house and its middle, along the perimeter. In total - 8 pedestals. The process is time consuming, difficult, but the result is worth it. When the curbstones were finished, we made a mound around the entire perimeter. The continuation of the outdoor work was postponed until the following summer. And we took up the interior renovation of the house.

This is a large room and let's start with it. Before the renovation, it looked like this:

This is her right corner. and this, in the photo below, is the left corner. As I write a thread, I'll stick to these two angles.

First, all layers of the old wallpaper were completely torn off. The windows were still old, but we were already waiting for the masters to install plastic windows.

The old stove was dismantled. and the stove-maker folded a new one.

Installation of plastic windows. the further, the more terrible, but the result is important.

AND THE RESULT DIDN'T MAKE YOURSELF WAIT LONG. I decided to close one window completely and make one big one - there will be a dining room.

After installing the windows, the men began to dismantle the old floor, level the logs and put brick cabinets under them.

Then the floors were laid with old boards (they will serve for a very long time, since they are thick and dry), and in places where there were rotten ones, they were replaced with new boards.

And then my "female work" has already begun, I insulated the walls with penofol,

Installed a metal frame for walls and ceilings. my mistake was that first you need to do the ceiling, and then the walls, and not vice versa. I found the technique for performing these works on the Internet, I will not dwell on it in detail. If you have any questions, I will be happy to answer ,what do I know.

It is much more difficult to fix the frame on the ceiling, the neck hurts.

When the metal frame is completely ready, you can sew gypsum boards to it, preferably in a checkerboard pattern, starting from the ceiling! Do not forget to scatter the electrical wiring and hide it in the gafrochannel, behind the profile, and install the distributor boxes in a place convenient for you.

In this photo you can see wooden blocks, I screwed them on for the subsequent fixing of bookshelves. Exactly the same, only thinner, I fix them under the ceiling above the windows (for attaching the cornices).

When all the walls and ceiling are sheathed with gypsum board, we putty with a spatula and align all the joints between the sheets and the places where the screws are screwed in with this composition.

At the corners and seams, we lay a reinforced mesh for the strength of the joints, and after everything is dry, we sand it, apply a primer to the walls and ceiling.

And now the most interesting moment is wallpapering. I took vinyl white for the ceiling and with delicate roses on the walls.

When the wallpaper is dry, I by mutual agreement

invited a team of craftsmen to finish their work in this room on the windows (slopes and window sills).

After that, I glued the ceiling plinth, hung the shelves on the wall, put my flowers on the windowsills, which the guys from the company had already installed for us.

The carpenter helped put the interior door, only then I found out that it was standing upside down. (what a difference!) if only it functions normally.

I pasted the doorways with a white corner on a liquid nail. On the right side, the stove is new, heats all the rooms at once.

The firebox itself is in the bathroom.

I put a substrate on the rough floor, then fiberboard and linoleum. Then she screwed the floor plinths with self-tapping screws and voila-beauty.

This is the big room.

Some of you wanted to see more details about concrete pedestals, so I added details. So, a layer of windows was inserted, the house was sheathed with flat slate from the outside, and a mound was made around the house, until next summer.

Now let's continue about outdoor work, after the cold winter and spring. next summer.

When all the pedestals are ready, gradually, opening each side of the house from the blockage, remove the rotten logs of the lower crown, dry them with waterproofing,

we install the formwork, lay the reinforcement, connecting it to the ends of the reinforcement of the corner pedestals and fill it with concrete.

We do this together with a man, under my strict guidance.

We make brickwork on the finished foundation.

And as expected, the blind area has been made. not quite ordinary.

This is all about outdoor work, home renovation. If you have any questions, ask, with pleasure that I know, I will answer. And for everyone who is interested, the continuation of the internal renovation awaits - the dining room!

Thank you for your time. Your LYUDMILA.

Before you start restoring a house, you need to draw up an estimate, develop a detailed plan for the sequence of work, and determine the amount of repair.

First you need to decide in what condition the foundation is. If the old foundation has lost its strength and its condition is alarming, proceed to restore it. A quick foundation repair in low-rise construction can be done using screw pile technology. The bottom line is to replace any kind of foundation with screw piles.

When reconstructing the foundation under a wooden house, the building should be raised to a certain height using jacks. If the structure shows signs of severe destruction, then it is better to completely dismantle it and install a new one. The foundation with minor modifications can be reinforced with brickwork. If it is a strip structure, install the formwork and pour the concrete mixture over the foundation.

The most common material in low-rise construction is wood. Wooden log cabins can last 100 years, or even longer, but they also deteriorate and require restoration. The restoration of the old log house takes place in several stages. First, remove the old finish, look at the condition of the logs. Then the rotten crowns are replaced. Seal the seams between the logs. Today there are several options for sealing - this is the traditional old-fashioned way - caulking with tow and the modern method that has become popular in recent years - sealing with acrylic rubber sealant. The blockhouse is treated with an antiseptic.

For strengthening, the frame can be overlaid with bricks or revetted with artificial stone. A good option for renovating facades is siding.

The restoration work is completed with the repair of the roof. A strong reliable roof is a guarantee of a comfortable warm home. Remember, roof restoration is only done in dry weather.

The covering is removed from the roof, the crate is checked, all rotten boards are replaced with new ones. Sometimes it is necessary to change the rafter bars.If the wooden elements of the roof are affected by a bug, they must be treated with an antiseptic, nitro paint or acetone, they effectively fight parasites.

A waterproofing material is laid on top of the updated lathing, a new coating is laid.

Restoring an old home is a laborious process, but with the effort you can achieve remarkable results.

There are three main types of foundations: columnar, strip, monolithic.

The device of the simplest strip foundation is carried out as follows: first, coarse-grained sand, gravel or crushed stone with a layer of 20 cm is poured into a pre-prepared trench, which is carefully tamped, while sprinkling with water, and after that, the entire space is filled with cement mortar on the ground surface levels and a brick base or rubble stone is laid out. A double layer of roofing material or roofing paper is laid on top of the foundation.

Foundation blocks are installed on a leveled layer of sand up to the design level. The maximum deviation of the leveling layer of sand from this mark should be no more than 15 mm. In this case, the foundation glasses, as well as the supporting surfaces, should not be exposed to external contamination.

The most expensive of all types of foundations. The installation of such a foundation is usually carried out under heavy stone houses. It is poured into a single reinforced monolith to a freezing depth of 1.5 to 1.7 meters. Such a foundation is recommended for use in the construction of brick and block houses, which have a sufficiently strong effect on the foundation, and the distortion of the structure is likely to lead to cracks in the wall and the subsequent threat of destruction of the structure.