How to make repairs in the bathroom and toilet with your own hands

In detail: how to make repairs in a bathroom and toilet with your own hands from a real master for the site my.housecope.com.

There are many ways to revitalize the interior of the bathroom. In the process of repairing the toilet, you can add interesting details with your own hands. In this article, we will talk about some transformation techniques that will help in the design of the space.

If we are talking exclusively about ideas, watch as many photos as possible. Before starting the repair, it is advisable to represent the final result as accurately as possible. Although some of them will definitely change anyway. If your toilet is already ready for renovation, the following plan can be used.

We decide on the decoration of the walls (plastic panels, PVC, wallpaper or tiles)
Choosing how to hide pipes
We decide whether we need a wardrobe where it will be located
Choosing a toilet
We look at the trends in the finishing of the current year

These are the main steps. Read about each of them with photo examples here - use the plate for quick navigation. And now - cool ideas as such, so that you can pick up something interesting and useful.

Yes, pictures. Many would say that this is a very bad idea for renovation. Nevertheless, practice takes place. The classic design option is a golden frame against a background of red walls.

For each style, you can choose the right picture that will effectively decorate the room. The frame of the product must also correspond to the overall concept.

The tone of the walls continues throughout the painting.

A massive white frame sets off the active background and matches the color of the plumbing.

Plant motifs on the wall echo decorative flowers.

The bright pattern is in harmony with the color of textiles and hanging baskets.

Video (click to play).

Pratika shows that most people prefer to make built-in lamps or something else inconspicuous in the toilet. But you can, on the contrary, make lighting a part of the design! A modern design white chandelier matches the shade of the floor, toilet and sink against a wood grain backdrop.

The chandelier is massive enough for this bathroom and attracts attention. Let's skip the jokes!

Decoration in New Year's style. The filling of the niche can be changed, depending on the mood.

An unpretentious composition on the background of wooden dies - a wreath of dried flowers and decor in the form of a dried fish. The idea is easy to bring to life, and its implementation with your own hands does not take any energy at all.

Antique forms complement the marble walls.

Red and white interior in country style for Valentine's Day. Anyone can make such a design.

Candles can replace the main light in the evening.

The accent tone of the stylized bird and the organic shapes of the lamps break the severity of the interior.

Open shelves look spectacular only if order reigns on them.

The wood texture of the shelves matches the material of the cabinet. The three primary colors look great in a single space.

A capacious shelf is formed by the upper edge of the installation box.

In a small bathroom or in a room with brightly decorated walls, avoid piling up furniture, choose a laconic form of plumbing.

A suspended toilet with installation looks compact, without unnecessary details.

Choose plumbing in the same range, especially if the room is miniature.

When choosing an active pattern for the walls, give up wall cabinets in the toilet.

Suspended toilet bowl with installation in a bathroom with an area of 0.7 sq. m.

A minimum of items in a combined bathroom with an area of 1 sq. m. This was the main idea of the repair: we do everything simply, concisely, and most importantly - cheaply and with our own hands.Tile collections have long been selected by designers in showrooms.

No, really. Anything can be found on the market these days. So why not get creative with the choice of plumbing during the renovation? The black collection of sanitary ware looks unusual and is combined with the decoration of the space. The interior is also complemented by a painting in a black frame and a spectacular vase. The twisting branches in a vase are similar in shape to a water heater.

Toilet and sink in the form of truncated and inverted cones. The perspective of the marina and the futuristic shape of the sanitary ware in the interior look interesting and stylish.

Plumbing in vintage style.

Specular reflections distort the perception of real geometry. This is not the most popular technique when repairing a toilet with your own hands; many simply do not perceive this idea in such an intimate room. But this effect allows you to visually expand the boundaries of small rooms.

The mirror makes the room not so narrow (visually).

Hello dear readers! Continuing the theme of repair, I will tell you how to start repairing the bathroom and toilet with your own hands. Surely many repairing these premises are faced with such a question.

If you are the owner of an apartment in which the bathroom is located separately from the toilet, I advise you to start repairs with your own hands at home by working out the same color scheme and style. Even if the rooms are divided, it is one whole. The design is chosen the same or similar in the type of finishing materials used and color.

Toilet and bathroom are kind of twins. I advise you to cover the premises with tiles of the same type, but of a different shade. If you use the same finishing technique, you will end up with dissimilar rooms that will create a different mood. If the walls and floor are made in the same color, but with different finishing materials, discomfort will appear due to the contrast between the rooms.

I think now you understand why it is better to use the same tiles and decor for finishing the bath and toilet. This approach will help you save money. After finishing, there will be scraps, which are most likely to find a place in the second room.

A bathroom is a room in which a person is left alone with thoughts and emotions. Here he takes a shower, relaxes, rests after a hard day, gets rid of irritation and fatigue, gets a boost of energy.

The described effect will only bring a comfortable and comfortable bathroom.

Measure the room ... Take a piece of paper, pencil, tape measure and measure the length and height of the walls, the area of the room. Based on the numbers obtained, calculate the amount of materials that will be required to renovate the bathroom.
Imagine a new bathroom ... Decide on the color and type of finishing materials, the location of the bath, furniture and accessories.
Prepare the room ... Remove old finishes from the walls and ceiling of the bathroom. The work is dusty and dirty, so wear a respirator. You will need a hammer drill, spatula, metal brush and other tools.
Primer the walls ... Route electrical wiring and level the ceiling with putty. At this stage, mark the vertical and horizontal lines using a level or plumb line.
Replacing the water supply ... A responsible step, I do not advise saving on money. We are talking about replacing the plumbing, risers and sewers in the bathroom.
Floor waterproofing ... By making a cement screed, water will not seep to neighbors. Treat the joints between the walls and the floor, the entire area of the bathroom with a special waterproofing solution.
For wall and floor decoration ... Try to lay the tiles in the bathroom yourself. If you don't have the skills, ask a tiler for help. Some, for the sake of economy, do not revet the space behind and under the bathroom. Better to cover the planes, and put the bath on the tiles. The screen will help to hide the side and communications.
Door installation ... If you are going to replace your bathroom door, do so before installing the tiles.
Skirting and ceiling ... At the end, along the perimeter of the ceiling, install a decorative plinth, and paint the ceiling with water-based paint. If this option for finishing the ceiling in the bathroom is not suitable, pay attention to stretch ceilings or structures made of plastic panels. It remains to close the seams.

Read also: DIY garden shredder repair

Following the instructions, you will reach the final stage. At the end, install the sink, hang the mirror and lamp, install the furniture. The end result is a beautiful room.People find it difficult to renovate a washroom. The toilet is an important part of the home, which I advise you to repair thoroughly and correctly, taking into account all the little things. How to start the painstaking process, I will tell you below.

The photo shows an example of how you can carry out the work yourself

Even in a small area, you can create a comfortable and attractive environment.

Repairing a toilet is both simple and complex. Simple because the volume of work is small due to the small area, and difficult for the reason that, due to lack of space, you need to think carefully about everything.

All work can be broken down into 10 stages:

Development of the future interior;
Purchase of the necessary materials and tools;
Dismantling of old plumbing and decoration;
Replacement of communications and laying of new ones (if necessary);
Construction of a box for masking pipes;
Floor covering device;
Wall decoration;
Ceiling decoration;
Installation of plumbing and other equipment;
Door installation.

To get a neat bathroom, you will have to carry out a number of works

You do not need to think about where to start work, since first of all you need to think over the layout and decoration.

To do this, you need to do the following:

Measure the area at your disposal. This is the main aspect that determines what you can deliver and how to arrange the elements.... Unfortunately, most often there is very little space and you have to adapt to the circumstances, and not come up with interesting solutions;
Determine what equipment will be installed. If there is very little space, then most often only the toilet is placed. If there is more space, then you can add a washbasin, bidet or even a urinal, it all depends on your wishes;

Equipment installation standards: from the center of the toilet bowl to the wall should be at least 40 cm, the sink should be located at a distance of at least 30 cm;

It is important to position the plumbing correctly

A wall-hung toilet can be an excellent solution.It does not take up space on the floor, but a metal frame will have to be attached to the wall, which will take about 10 cm of space. This option looks very attractive, but in installation it is much more difficult, this also needs to be taken into account;

Wall hung toilet - an interesting solution for small spaces

The color scheme should be in soothing colors. You should not use bright colors and variegated finishes, it does not look the best in the bathroom. You can look at design ideas on the Internet, there are a lot of examples, and anyone will find an option to their liking.

There are many options, find the one that you like and which you can implement

After you have decided on an approximate design, you can proceed to the selection and purchase of materials. You must measure the area of the floor, ceiling and walls in advance in order to quickly calculate the approximate costs for one or another finishing option.

First, let's figure out what you can put on the floor:

Ceramic tiles are the most popular solution. There are a huge number of types on sale, so there will be no problems with the choice. If you need a cheap option, then I will give you a little advice: look for substandard in stores, it is inexpensive, and due to the small volume, you can choose good ceramics. Most often, the marriage is not visible, but you can save very well;

The tile is a great solution, the material looks good and is not afraid of moisture and cleaning agents

Self-leveling floor is a relatively new solution that is great for a bathroom. The coating is not cheap, but due to the fact that the area of the room is small, the cost of installing it will be only slightly higher than when using ceramics. In addition, this option can be implemented with your own hands, which is also important.

Such coatings can simulate a wide variety of images.

For walls, you can use the following options:

Ceramic tile. You can create patterns or even ceramic paintings on the walls. For the most discerning, a mosaic is suitable, a very effective, but also quite expensive coating;

Tiles are great for walls too

Budget finishing option - PVC panels. They cost a little, but they also look much worse than the same tile. But if you need to do it cheaply and reliably, then this decision will come in handy;

PVC panels are good for toilets

You can even stick wallpaper on the walls. You need to choose moisture resistant options. I would recommend using glass fiber as it can be repainted. That is, you can easily carry out cosmetic repairs and refresh the room in the future, simply by changing the color of the walls.

Wallpaper allows you to create a very original setting.

As for the ceiling, it is easiest to implement one of two options with your own hands:

Fastening of plastic panels. They look good on the ceiling and are inexpensive. You can choose a more expensive option - rack metal ceilings. They look presentable and are almost indistinguishable from plastic in installation;

This option looks good.

You can just putty the surface and paint it. If the ceiling is curved, then it is easier to build a frame and fix moisture-resistant drywall... So you get an even base, which must be putty with a thin layer and painted.

The color of the ceiling is matched to the rest of the finish

As for the tool, its list depends on the selected materials for finishing. Below I will provide a list of fixtures where necessary.

It is worth starting work by removing everything unnecessary. The process is simple, but it requires a lot of effort and a significant investment of time.

The sequence of work is as follows:

First of all, old plumbing is removed. Most often, you just need to remove the corrugation from the toilet. If you have old equipment, you will have to break up the cement that used to strengthen the joints;

You can temporarily put a new toilet in order to use the bathroom

The floor is usually covered with old tiles, which are very firmly in place.You can knock it down with a hammer and chisel, or with a puncher. The process is dusty and noisy, so it is better to work during the day;

Removing old tiles is a tedious job

If there are tiles on the walls, then they are removed in the same way as from the floor. If the surface is covered with wallpaper, they need to be soaked and removed. Painted surfaces do not need to be cleaned if the paint adheres to them firmly. The exception is oil formulations, they must be removed, it is best to use a special wash for work;

Everything that does not hold well is removed from the walls

If there is whitewash on the ceiling, then it must be soaked with water and removed with a spatula. Painted surfaces are inspected, only damaged areas can be removed.

At this stage, the following works are performed:

If the old riser does not inspire confidence, then it is advisable to replace it with a new plastic one. Most often, you have to change the section from floor to ceiling, adapters are placed on the connections, and the structure itself is easily assembled from the constituent parts of the configuration you need;

The riser is attached to special clamps

If you need to lay pipes around the room, then it is best to hide them in the grooves.... Communication may be needed if you put a sink and bidet or bought a toilet with a bidet. It is important to think about the correct pin layout so that everything is convenient. Even if it is not necessary to lay pipes in new places, it is advisable to replace the old steel communications with new plastic ones;

It is better to hide the pipes in the wall

Do not forget about laying the wiring to the fixtures and the fan, if any. It is also better to hide them in grooves.

To hide the sewer pipes, you need to build a box. If the riser goes in the corner, then only this part of the room is closed, and if in the middle, then it is easier to make a partition and sew up the entire space behind the toilet.

The instructions for carrying out the work are simple:

For the frame, we will use metal plasterboard profiles. Guiding elements are attached along the walls, and the structure is formed by the main profile;
First, the structure is marked, vertical lines are drawn along the walls using a level or plumb line, the outlines of the future box are drawn on the floor and ceiling;

For accurate marking, you can use a square.

A wall profile is fixed along the perimeter of the future structure. To do this, holes are drilled in the walls for fast mounting dowels with a diameter of 6 mm;

Guiding elements define the outline of the future structure

Then the frame is attached, for this, the main profiles are used. To give the structure rigidity, it is reinforced with ribs, which are located every 40-50 cm;

The frame must be rigid

The last step is to mount the moisture-resistant drywall. It is cut into pieces of the required size and fixed with special self-tapping screws with a fine pitch.

When carrying out the cladding, do not forget to leave an opening for the installation of the door to check the condition of the equipment and take readings from the meters.

The hatch will be inserted after finishing

We will start from this part of the room. First, let's figure out how a ceramic floor is made. To work, we need a certain set of materials and tools, listed in the table.

The bathroom is one of the smallest rooms in an apartment or private house in size. But, despite this size, this room is considered the most difficult from the point of view of architects.

Bathroom renovation, where to start

The first difficulty is that this is where all the layouts of engineering communications are concentrated. Any unskilled intervention in the wiring diagram will have very negative consequences for the entire structure. We will tell you how to competently solve problems with engineering communications in the article a little below.

The second difficulty is that the operating conditions for building materials, plumbing equipment and special furniture are the most difficult.Constant high air humidity, frequent direct contact of architectural elements with water and high temperatures require special materials and construction technologies. This is the only way to ensure the reliability and durability of the premises.

As with all construction work, bathroom renovations should start with planning. There are two reasons for the need to renovate the bathroom, there is a big difference between them, respectively, and the planning methodology is not the same.

The bathroom was damaged by flooding or fire. Such situations cannot be foreseen, and the consequences should be eliminated as soon as possible. Accordingly, there is no time for calm planning, decisions have to be made very quickly.

The flood always happens unexpectedly

Another major problem is finance. If you have time to carefully prepare for scheduled repairs and save money, then the consequences of the accident must be eliminated as quickly as possible.

The aftermath of the flood must be dealt with quickly

How to act in order to eliminate the consequences of emergency situations in a short time and with minimal losses? How to plan your bathroom renovation correctly?

Make an audit of the condition of equipment and building elements. Take this stage very responsibly, the more you notice the problems, the more complete the purchases can be made. And this means that there will be no need to go back to the store for every missed trifle and waste precious time.

Make an audit of the condition of equipment and building elements

Buy materials with the most similar properties

Make a work plan

When the preparatory planning stage is completed and materials have been purchased, you can begin repair work.

The situation is much calmer, there is time to think over and weigh everything in detail. What is recommended to consider when planning a renovation?

Consider your financial capabilities. At the same time, add up the price of all materials and the cost of their installation. If the repair is major, then you need to calculate the number and cost of re-equipment or installation of new engineering networks. The list of works includes the dismantling of old equipment and finishing materials (in the case of a major overhaul), preparation of wall, floor and ceiling surfaces, installation of water supply and sewerage, electrical wiring, installation of plumbing equipment and surface finishing. The specific list largely depends on the selected building materials and technologies.

Assess your financial capabilities

Consider the cost of plumbing or construction services

Draw a sketch of the room

Check the condition of the walls and choose materials for leveling, finishing

Only after clarifying all the questions, you can proceed to the direct repair of the premises.

The scheme of actions may change slightly, taking into account the peculiarities of the repair and the condition of the room. But for most cases, bathroom repairs need to be done in this sequence.

Step 1. Dismantling of old wall, ceiling and floor cladding. Use an electric hammer drill or manually remove the wall cladding. Don't try to preserve old ceramic tiles. Firstly, it is unlikely that it will be possible to reuse it due to its very unsightly appearance. Secondly, you can never predict how many pieces will remain intact and how many will have to be broken. Thirdly, the time spent on neatly knocking down old tiles can be used more rationally.

Step 2. Dismantle old plumbing and sewerage systems.

Important. If personal knowledge in plumbing intricacies is not enough, then we strongly recommend consulting a professional. Unskilled intervention in the installed heating, water supply and sewerage systems can completely disable them.

Cut metal pipes with a grinder, put the waste in one place.If the rest of the rooms are residential, then take measures to prevent the spread of dust. Always close the door, prevent drafts, cover furniture with plastic wrap. You will have to wear a respirator in the bathroom.

Step 3. Find out the location of the old wiring. This is not as difficult as it seems, but only if the wiring is laid in compliance with the PUE. Knowledge of the hidden wiring diagram will allow you to avoid many unpleasant situations during wall chasing or plaster removal.

How do I find the wiring in the wall?

How to find out the location of the wiring under the plaster?

Find the wiring box on the wall, it should be under the ceiling. In the wiring box, several conductive cables converge, it has holes for their output. Modern boxes are made of plastic, in old houses there are iron ones.
Find all switches and sockets on the wall, and on the ceiling where you connect the lighting fixtures. One of the main rules for installing electrical wiring is that all cables should be bent only at right angles, in direction they can only be vertical or horizontal.
Draw vertical lines from sockets and switches, draw a horizontal line under the ceiling from the distribution box. There should be wiring in the plaster along these lines. To be sure, deviate from them by 5-10 cm in each direction. The fact is that not all electricians are conscientious about their duties, in order to exclude damage to cables it is better to make a margin.

Thus, you will find out where you can hammer the plaster safely, and in which places to be extra careful. But in any case, before starting work, you should turn off the machine in the bathroom.

Work on the installation of electrical wiring

Step 4. Install new wiring, sewer and water pipes. We strongly recommend placing all pipes under the wall cladding. The work is much easier if the walls are finished with different slabs.

Important. Before installing pipes and electrical wiring on the wall, you need to indicate the location of switches and sockets, the connection points of the sink and bathtub. It is advisable to know the dimensions and features of plumbing, taking into account these data, you can accurately calculate the height of the location of water sockets and drains. Due to this, installation work will be accelerated, and the reliability of fixing plumbing will increase.

Step 5. Start leveling the ceiling, walls and floor. For the floor, professionals recommend using cement screeds, they have the highest performance indicators. If you plan to make a heated floor, then you need to take into account the total thickness of the cake and mark the position of the tiles on the wall from it.

For leveling, you need to prepare a container, a spatula, a level, a tape measure

The leveled walls are moistened during the drying period of the mixture

Step 6. After the screed has completely hardened, start laying the partitions. Their location should take into account the size of the bath or shower stall, the layout of the room, the presence of additional architectural elements, etc. merits.

First, beat off the position of the first row of blocks on the floor, check all dimensions and angles. Be sure to control the position of each row of blocks, it is better to lay them under the rope. To increase the stability of the partition through the row, tie the blocks with a perforated metal tape, fix it with self-tapping screws of the appropriate length. Use the same metal tapes to fasten the blocks to the main walls of the bathroom.

Step 7. Begin the installation of sewer pipes. If you are doing a major overhaul of a room, then you should study the purpose of each existing branch, otherwise you can turn off other rooms of the apartment or house.It is better to use plastic pipes. Connect them into a socket, for sealing all additional elements have rubber gaskets. The pipes are fixed to the wall with special clamps. If finishing plastering is planned, then walls need to be channeled under the pipes. The location of the electrical cables, drawn earlier on the wall, increases the safety of the work.

Step-by-step instructions for repairing a bathroom and toilet.

According to most finishers, repairs in an apartment should be started from the bathroom. Let me explain why: this is the dirtiest and dusty part of the renovation, requiring not only the dismantling of old tiles, plumbing fixtures, doors, and sometimes the entire bathroom walls.

So the first thing we do is we take out the old plumbing: a bath, a sink, a toilet bowl ... Everything that costs, weighs, lies.

• Next stage: with the help of a grinder we cut off all the old pipes to the crane located on the riser.

• Using a punch, knock down the old tiles.

It is important if the plaster under the tiles moves away from the wall, bunches ... it must also be beaten off.

• We dismantle the old door together with the box.

• Change risers... Now we turn our attention to the plumbing and sewer risers. This is a very important part of the renovation and must be changed. After renovation it will be very problematic. If you are not an expert in plumbing work, then it is better to invite qualified craftsmen to replace the risers, but you can do the internal wiring of the water supply yourself.

• Checking the hood... Let's move on to the hood. If we do not want the bathroom to be stuffy, we need to check the operation of the hood. To do this, we bring a burning candle to the hood and evaluate its work by the flame tongue: the better the hood works, the more intensely the flame is sucked into the chimney pipe. If the hood does not work correctly, we either clean it or install a fan in it.

• We ground the walls... At the next stage, I propose to clean up properly: take a broom and sweep out all the debris and dust from the bathroom. After all the dust has settled, we take a deep penetration primer and prime the walls.

• Installing beacons... After the primer has completely dried, we install beacons for further plastering of the bathroom. Lighthouses must be installed strictly according to the level, observing the plane of the wall and maintaining angles of 90 degrees.

• Plastering walls... Have you installed the lighthouses? Let's start plastering. To do this, we need a rule, a spatula, a drill and a drill mixer attachment. Bathrooms are plastered, as a rule, with dry gypsum mixtures, since there is no shortage of them on the market. I usually use Rotband plaster. We take a bucket of 12 liters and prepare a solution in it as written in the instructions. Using a spatula, we throw a solution between the beacons of one wall 50 centimeters from the floor. Then we take the rule, press it against the lighthouses and pull it up - we get a flat surface. We remove superfluous from the rule. And so on all the walls - from floor to ceiling. There are not large pits left - it does not matter - then we level them with a spatula. If everything is smooth and beautiful, then you have coped with the task.

• Leveling the floors... The next stage is the floors. We level them with the help of "self-leveling floors". We dilute the mixture as stated in the instructions, it can even be slightly thinner, and spread it all over the floor using a needle roller. After drying, the walls and floors, just in case, we check by level, we eliminate unevenness.

• We make a detailed plan of the bathroom... At the next stage, we must decide on the design of the bathroom, where? as? and at what height? there will be a bath, a sink, a mirror, a washing machine (if any), a towel dryer, a toilet bowl, a box covering the risers. To do this, we take a tape measure and measure our bathroom - after plastering, the dimensions have changed. Then we take a pencil and a sheet of paper, and sketch everything. Let's call this a bathroom plan. For the plan to be accurate, at this stage, we need to buy all the bathroom objects.It is important to remember: if the bathtub is tied to the size (I mean that your bathtub is not half a football field, but for example 1m.70cm by 1m.50cm), then the bath should be bought as long as possible. And if your size is 1m.68cm. - you need to buy a bath for 1m.70cm. Then 2cm. screw it up. With this sort of sorted out.

Video - turnkey bath repair• We make (sketch) a detailed markup of the water supply and sewerage system... If everything is purchased, then we continue. We collect the bath in a free room. We put it on the legs and level it. As a rule, in most bathtubs, the height of the legs is adjustable - we adjust the height for you. We measure the height and width of the bath. We transfer the dimensions to the bathroom wall. All the same - we do the same with the sink and the washing machine. The next thing we do is mark on the walls how our water supply and sewerage system will go. A bathroom faucet is usually installed in the center 10 cm above the bathtub - this also needs to be sketched on the walls. The distance between the pipes to the bathroom faucet should be 15cm. We mark the water supply for the sink, based on the structural features of the bedside table, and the length of the flexible hoses of the mixer. We mark only one pipe under the washing machine - the cold one. We sketch the sewer pipes at an angle towards the riser (so that there is a drain). If a small slope can be made under the bath and sink, then the outlet under the washing machine should be at a distance of 50 cm. from the floor.• We make (sketch) a detailed marking of the wiring... The next thing we do is define the wiring. How many sockets will we have, and where - if there is a washing machine, then next to it. Use an electric shaver - next to the mirror. If you have a backlit mirror, you will need to bring out a wire under it (decide at what height). If there will be a fan, we will bring it out under it too.• Making strobes... When we have completely decided and sketched, we take a puncher and chase it according to the plan. Next, we remove and prime the grooves.• We install water supply and sewerage... At the next stage, we install the water supply (comb) and sewerage system. Don't forget to install water meters and filters as well. Since our water supply is retracted into the walls, it is better to use polypropylene pipes or metal-plastic pipes.• We mount a heated towel rail... At the next stage, we invite the masters or install the heated towel rail ourselves. The pipes are also wall-mounted.