Button on the jacket DIY repair

In detail: button on the jacket DIY repair from a real master for the site my.housecope.com.

Rivets for clothes are an invisible, but irreplaceable element of every thing, from sheepskin coats, fur coats and jackets to underwear. Even expensive branded clothes are often equipped with low-quality fittings: clips, hooks, zippers. Very often decorative rivets come off, and an expensive item becomes unusable. In order not to seek help from a clothing repair shop, you need to learn how to work with a variety of sewing accessories on your own.

There are two types of rivets: utilitarian (those that are used for clamps, fastening and fastening) and decorative. Sometimes sewing accessories in a product combine both roles. It is important that it contributes to the comfortable wearing of things. Sticky zippers, detachable hooks and slippery buttons force you to throw expensive items into the farthest corners of your wardrobe. The first step that needs to be taken towards the correct selection of fittings is to learn to distinguish one type of it from another.

loops;
hooks;
buttons;
textile Velcro fasteners;
blocks;
lightning;
holniten (metal rivets, which are most often used in denim clothing to secure the stitching);
eyelets (durable metal or plastic fasteners, which are most often used in leather goods);
buckles.

The materials from which the indicated types of fittings are made are very diverse. Their quality determines how comfortable and comfortable the wear of the thing will be. In addition, the accessories are designed not to disfigure, but to decorate the thing, even if we are talking about such an ordinary detail as rivets on clothes.

Video (click to play).

The most popular materials for making buttons, fasteners, fasteners are metal, ceramics and plastic. Most often, sewing accessories are made from a combination of materials in order to combine both practical and decorative characteristics in a single piece. If the part is incorrectly selected, the features of the fabric and leather are not taken into account, the fastening is incorrectly carried out, then the accessories simply will not cope with the functions assigned to it. After all, it is necessary not only to fasten the edges of the clothes with high quality, but also to decorate the thing harmoniously.

A lot of what is called a rivet tool can be found in the house. But there are some devices that may not be in the house, so you will have to purchase them or use a tool designed for other work. It is not recommended to start the practice of attaching rivets with your own hands on an expensive new thing, you should first practice on something cheaper.

The tailoring and repair shop uses a press, different attachments for different fabrics and rivets, a punch, and tongs to install sewing accessories. A home installation will require at least a punch, awl, hammer, tongs, and an anvil, which can be used as another hammer.

A punch is a tool that allows you to make a perfect hole in a fabric material. When using it, the edges of the fabric do not deform, do not crumble.

The variety of attachments that the design of the punch assumes allows you to make holes of different diameters.

If you plan to purchase one punch without attachments, then you should take the thinnest and smallest one. Using scissors to punch a hole in the fabric is undesirable, as the sewing accessories installed are likely to fall out of such a hole.

The hole made by the punch should be small, smaller than a block or any other rivet on the clothing.To prevent the fabric from crumbling along the edges of the hole, you need to process the edges of the hole with glue (you can use silicone).

How to rivet material with your own hands? To do this, you need to work carefully, do not rush, do not make sudden movements. Otherwise, the tool, fabric material and sewing accessories may be damaged.The most common type of fitting at home is the installation of a block. Ateliers and workshops have tongs for this purpose. The hallmark of good pliers is the strong, rigid handles that allow you to work quickly and smoothly. Image - Button on the jacket DIY repair

Do not despair if special forceps are not at hand, you can do without them at home. How to make a mount yourself?

A hole of the required diameter is made in a textile or leather material using a punch. The block is threaded, then the ring is inserted. The place with the block is located on the anvil, then its leg is split with a punch. If all steps are performed correctly, the rivet petals will bend themselves properly. For the final fixing on the block, you need to walk with a hammer, without applying great force.

There is another way to install this type of rivet. The leg is cut with a knife and light hammer blows on it. This should not be done along the entire diameter, cutting is performed only in some areas of the petals, then insertion into the prepared hole is performed. A ring is put on the resulting structure, the bent petals are bent. In ateliers and workshops for sewing and repairing clothes, this method is not used, its use often entails damaged rivets and deformed areas of fabric.

The most difficult riveting process involves heavy, coarse fabrics that are often used in outerwear. Difficulties accompany the installation of rivets on jeans. But if you work carefully, use a good tool, follow the technological steps and do not rush, you will certainly succeed in attaching a rivet. How to put fittings on heavy fabrics correctly? Let's analyze the process in more detail. Image - Button on the jacket DIY repair

The best rivet for jackets, coats and windbreakers is the four-part button. To install it, you will need the same tool as for installing the blocks. The leg of the four-part button is unbent from the bottom and from the top, then the standard riveting process described above is carried out. The installation process of denim accessories is somewhat different from all the others, because it requires a special denim button, most often we are talking about installing a button for jeans.

With the help of an awl, a hole is made in the right place, a button leg is located in it. A denim button is placed on a metal anvil, then a leg is driven into the button. This is the easiest and safest way to install a rivet on denim.

Now how to remove the rivet. Removing a rivet sometimes requires as much care and attention as its installation; attention, accuracy and patience will come in handy here, especially if the use of this rivet is planned in the future. Without special equipment, it will not work to remove the rivet at home without damaging it and the fabric that adjoins it. If its use is not planned, it is enough to cut off its head with an anvil, a hammer and a knife.

Correctly installing and removing a rivet is a matter of certain skill and skill, but everyone can learn this, having acquired the simplest set of sewing tools and good accessories.

Clothing accessories are considered to be one of its main adornments. Often, even the largest and most expensive brands use low-quality materials, as a result of which they become unusable over time. This applies not only to hooks and zippers, but also to buttons. In order not to seek help from the atelier, you need to have the skills to work with fittings on your own.Installing buttons on clothes at home usually takes a little time, so it can be a reason to spend your leisure time pleasant and useful. In our article we will talk about how to put a rivet on clothes at home with a minimum set of available tools and materials. With this, you can not only please yourself with a new style, but also not buy unnecessary devices, including an expensive press for installing buttons.

Clothing accessories are divided into the following types:

Buttons.

Velcro textile fasteners.

Blocks.

Lightning.

Hinges.

Hooks.

Holniten.

Buckles.

Eyelets.

Rivets.

All fittings are made from different materials. More often than not, quality plays an important role in shaping the value and durability of the product itself. Any accessories should, first of all, decorate clothes, therefore, their selection should be treated responsibly.Clasps can be made from different materials, including:Sometimes fittings are made from several materials in order to add beauty and style to the product. In these cases, you should select the fasteners already for the very element of the wardrobe.If you choose the wrong fittings, the entire product may become unusable. Don't skimp on fasteners, as low-quality buttons and hooks can let you down at the most awkward moment.
to the menu ↑If you have the opportunity to consult a specialist, then you should definitely do it. In other cases, you will have to solve the problem yourself. To do this, you will need a set of tools, which, as a rule, are available in the house of any owner. If you want to know how to install a button on your clothes, you will have to prepare:

Anvil (or second hammer).

Punch.

Forceps.

Hammer.

Awl.

The punch can be purchased as a universal one, but it is better to buy a set right away, since if you have certain skills, you will most likely decide to repeat the operation again on other elements of the wardrobe.
to the menu ↑

You should not cut the hole for the barrel with scissors, as sooner or later it will begin to fall out of it, which will cause discomfort during use. The hole should be only a few millimeters long so that the button can easily pass through, but also remain in it.

It is better to punch a hole in fabric or leather on a wooden anvil. Otherwise, the tip of the punch could be damaged. For the anvil, you can use a dense tree, since other types of it will begin to crumble after a few blows. Other materials will work as well, but should not damage the punch.

For better bonding, you can glue areas on bulk materials with a special cloth. The edges and holes in such cases are treated with silicone-based glue, which becomes elastic after drying.

You should not start training on expensive clothes, as you will most likely damage them. You can try sticking a rivet onto a simple piece.
to the menu ↑

It is necessary to work with all instruments as carefully as possible, since any sudden movement will lead to tissue damage or injury. The material must be prepared in advance so as not to be distracted.

Most often, when creating a model of clothes, blocks are used. In the atelier, tongs are used to install them. It is better to buy such a good tool, since low-quality handles with frequent use can bend and deteriorate.

The main feature of a good forceps is the handles of dense material. They will make it possible to work pleasantly and easily, bringing pleasure from the process and the result.

If you don't have special forceps at home, you can do without them. We suggest you use the following step-by-step instructions:

With a punch, you need to make a hole of the required diameter in the material of textiles and leather.

After that, thread the leg-block and put on a special ring.

A piece of clothing with a block must be placed on the anvil.

Using a punch, split the leg into all the petals. If you do everything right, they will bend in the right direction by themselves.

At the end, you need to walk along the block with a hammer in order to secure the edges to the fabric.

Do not use too much force as this can damage the fabric. You need to work carefully and gently, especially when it comes to products made of soft materials.It is important to lay the ring in such a way that it lies with the convex side away from you. So it will itself repeat the shape of the edge of the block and dock with the fabric.
to the menu ↑The most difficult process in this case is the installation of rivets on the rough fabric. It is from it that outerwear is often made. Similar difficulties can be experienced when installing rivets on jeans.If you use a good tool and follow the instructions, you will most likely succeed in attaching the button to your clothes at home.The easiest way is to install buttons on coats and jackets, as they are made of thick fabric. It is not difficult to cut through it, but it is important not to be mistaken with the dimensions. Without punching holes, you are unlikely to be able to install a button on a jacket at home.You will need the same set of tools to install the blotch onto your jacket. To achieve the result, we offer you step-by-step instructions:

Unbend the legs on the button from the bottom and from the top.

Repeat the standard riveting process described earlier.

To install accessories, you can pick up several types of dowels in a hardware store. They are in a blunt state to allow flaring of the rivet legs. Dowels are best suited for cases where the product is small.

In order to install buttons on jeans, you need to proceed as follows:Use an awl to poke a hole where the button will be located.Insert the leg into the resulting hole.Place the button on the anvils and hammer in the leg with a hammer or other appropriate device. You need to hit precisely on the leg, since otherwise you will simply damage the decorative pattern.When purchasing jeans buttons, you need to choose a set in which all the legs are cut. They will hold well in the button, so you can not worry that the products will fall out at the most crucial moment.To install a button of a complex design, you need to make sure that it moves well on the leg.To do this, you need a sawed-off dowel, since it will have to be expanded on a button after installation.
to the menu ↑

Pass the button leg into the belt.

Place the bar on the buttons.

Before starting further work, you need to evaluate how far the leg comes out of the button. You will have to bite off the edges if necessary. Otherwise, the leg may bend, which will require you to repeat the entire procedure.

Place the item with the button on the anvil.

The dowel must be placed in the center of the leg. With a light tap, you have to expand it until shrinkage with the entire cap.

You need to act carefully, as inaccuracies in movement can damage the surface structure.

The antenna-type button is installed on clothes in much the same way as the button for jeans.The only difference is that all manipulations are carried out only from above.The lower part of the part is much easier to assemble:

To install the button, you will have to purchase a tool with a special notch from the store.

If you do not have a tool, you can use a metal plate with a small hole. The lower part of the tool is inserted into it, and the leg is simply slammed with a hammer on the back of the product.

Without tools, putting a button of this type is more difficult than the others, which is why you still have to spend money on inventory.

If you fail to install the button the first time, remove it and try again.

Defective fittings are not suitable for use, as they may fail at any time.

You can use any tool at home to install the button on your clothing, including a dowel, nail, bolt, screwdriver, or pliers. You can also expand the cylinder using simple tools at hand.

It is imperative to install the button on a wooden surface that is used as an anvil.

The lower part of the button can be installed using a piece of wood. If you do not have one, another item made of dense material will do. With a drill, you can make a hole in it of the required diameter, which will fix the leg in one position.

First of all, you need to learn how to remove the old rivet. To do this, you will need a sharp object with which you will straighten the antennae and remove the ring.If you do not plan to use the old hardware in the future, you can simply cut off the rivet head. For this, a hammer and a sharp knife made of dense steel are perfect.
to the menu ↑This item is essential for attaching buttons to clothing. Even if you do not have professional skills, you will have to purchase a device. It is used to make a neat hole in the fabric. As a rule, it resembles a regular hole punch. Included with it are nozzles of different sizes in the form of punch holes. All of them can be applied to different types of fabrics.

We hope that our article has given you the opportunity to find the answer to the question of how to install a button on clothes at home.Garment accessories are an additional decoration and accessory. However, even expensive branded clothing is often supplied with low-quality fittings. This applies to both buttons and clips, hooks and zippers. In order not to seek help from the atelier, you need to learn how to work with various sewing accessories on your own. Installing buttons on clothes at home does not take much time, you can do this with a simple set of tools. Today we will tell you how to put a rivet on clothes at home using available materials and tools, thereby saving money without buying a special press for installing buttons.Garment accessories include the following parts:

Buttons.

Hooks.

Hinges.

Lightning.

Blocks.

Velcro textile fasteners.

Holniten are metal rivets. Most often used in denim to secure stitching.

Buckles.

Eyelets. Strong metal or plastic fasteners are mainly used in leather goods.

Rivets. There are utilitarian rivets - those that are used for clips, fastening and fastening, and decorative. Very often, sewing accessories in clothes combine both roles.

Important! All types of fittings are made from different materials. Often it depends on their quality how convenient and comfortable this or that thing will be worn. In addition, any accessories are designed to decorate clothes, even when it comes to such an ordinary detail as a button.The most popular materials for making fasteners and fasteners:Important! Most often, sewing accessories are made from a combination of these materials in order to combine practicality and beauty in a single piece. Read on for a detailed review of which fastener is best for a dress, skirt, or jacket.If the part is not correctly selected, that is, without taking into account the peculiarities of the fabric or leather, then the accessories simply will not cope with their functions. Then you will have to change the details on the clothes yourself, so as not to throw expensive things into the far corners of the wardrobe.Of course, if you have the opportunity, then entrust the installation of fittings to a master who has a special press, various devices, a set of tools, and most importantly - experience, thanks to which such work will not take him much time.If you do not have such an opportunity, or you want to find out how to install the button on your clothes, then prepare the following tools:

Awl.

Hammer.

Forceps.

Punch. This tool will have to be purchased. It is necessary so that the hole turns out to be even, and the edges of the fabric do not crumble.

Important! You can purchase one punch (the smallest size), but it is better to buy a set of punches with removable nozzles.

Anvil (or another hammer).

Do not cut a hole under the block with scissors, as over time the button or the block will surely "fall out" from it. The hole for the button should be minimal, it is advisable to even slightly pull the fabric over the leg, since the tighter the fabric is pressed against the part, the more securely it will be fixed.

Punch a hole in leather or fabric on a wooden (not metal) anvil to avoid damaging the punch point. The tree should be very dense (not loose). An area with a knot will do. Other dense materials can also be used as anvils that will not damage the punch.

Areas on knitted and loose materials where holes will be punched can be glued with an adhesive cloth so that the edges of the hole do not crumble. You can also process the edges of the hole with silicone glue.

Important! Don't start practicing riveting on expensive clothes right away, practice on something cheaper first. Image - Button on the jacket DIY repair

It is necessary to work with the tools carefully, slowly and without making any sudden movements. Otherwise, the fabric, accessories or tools may be damaged.

The most common type of fittings installation is the installation of a block on clothing. In workshops and ateliers, forceps are used for this procedure. However, such a tool should be bought of good quality so that the handles do not bend and the “cheeks” do not move.

Important! The hallmark of good quality pliers are the rigid handles that make it quick and easy to work.

Do not despair if you do not have special forceps at hand, you can do without them at home. Use the following step-by-step instructions:

Punch a hole of the required diameter in the textile or leather.
Pass the leg-block, put a ring on it.
Place the patch of clothing with the sequin on the anvil.
Use a punch to split the leg of the block into petals. If all the steps are done correctly, then the petals should bend themselves on the block ring.
Walk over the block with a little hammer to finally secure it to the fabric.

Important! Do not use too much force while working with a hammer, otherwise you can damage the fabric and bend the block from the front side.

When working, lay the ring with the convex side away from you so that it repeats the convex shape of the edge of the block.

The most difficult process is installing rivets on the rough fabric from which outerwear is often made. Difficulties also accompany the installation of rivets on jeans. But if you use a good tool and follow all the technological steps, then you will surely succeed in attaching the button to the clothes.

Important! The easiest way to fit on jackets, coats and windbreakers is a four-piece button that closes with a ring at the top of the button.

You will need the same tool as when installing the block. Sometimes, for this type of buttons, special punches are included in the kit, but using them is ineffective. It is much more convenient to use a punch that splits the leg into petals.

To make a rivet on a jacket or other outer garment, proceed as follows:

Extend the leg of the four-part button at the top and bottom.
Follow the standard riveting process (described above).

Important! If you often have to install accessories on clothes, then purchase several types of dowels from a hardware store (a construction nail with a wide head that cannot be bent). Blunt several dowels of different thickness. The construction nail does an excellent job of flaring the rivet legs, especially if it is very difficult to get to them, for example, when installing a denim button.

To install the simplest button on jeans, proceed as follows:

Poke a hole in the waist of your trousers with an awl.
Insert the button foot into the hole.
Place the button on the anvil (on a metal surface) and hammer in the leg. It is the leg, not the button, otherwise you will damage the decorative element.

Important! When buying a denim button, get a set that has a thread on the leg. Such a leg will be securely held inside the button, but a smooth leg may “jump out” over time under load.

Important! To install a button of a more complex design, the leg of which will move freely, you will need a dowel cut down on emery, since the leg of such a button will need to be flared on the button itself.

Read also a separate detailed material on the different types of fasteners that are used for denim clothing and how to put a button on jeans.

Step-by-step instructions on how to install buttons on clothes at home:

Pass the leg of the button through the belt.
Place a button on the bar.
Assess how far the leg comes out of the button. If necessary, “bite off” the edge of the part with pliers. Otherwise, the leg will bend and it will be impossible to expand it.
Place the button on the anvil.
Install the dowel on the center of the button leg, lightly tap with a hammer to flare the leg until it shrinks tightly with the head body.

Important! Be careful not to damage the decorative surface of the fittings.

In much the same way as a denim button, a button is installed on a mustache-type clothing. The only difference is that all manipulations need to be done only for the upper part of the button.

The lower part of the part is much easier to assemble:

To install it, you can buy a special tool with a recess inside from the store.
If you do not have such a tool, you can use a metal plate with a hole similar to the size of the "bump". Insert the lower part of the button into the hole of the metal plate, and “slam” the leg with a hammer from the back of the garment.

Important! It is quite difficult to put the antennae without special tools, so buy them a little more than you need.

If for some reason the buttons are not installed correctly, then remove them and put new ones. Do not use damaged buttons as they will not hold securely.
To install the button on clothes at home, you can also use the tools at hand: a Phillips screwdriver, a bolt, a thick nail, a dowel. To expand the cylindrical part of the button, you can use any cone-shaped device, and then, using a bolt of a suitable diameter (cylindrical rod), flare the button rod completely.
Install the button on a smooth wooden surface, but be very careful not to break the button or destroy it.
A piece of wood can be used to install the bottom of the button if there is no suitable metal object with the desired hole. Make a hole in a wooden block with a drill (the diameter and depth should correspond to the “male” part). Assemble the bottom of the button and place a block on top. Tap the part with a hammer.

Important! If you decide to start thoroughly practicing sewing clothes with your own hands, our articles will be useful to you:

Correctly removing and installing a new rivet is a matter of certain skill and skill.However, in order to accurately perform all technological manipulations, it is necessary to acquire a set of special tools. Even removing a rivet requires just as much care and accuracy as installing it, especially if you plan to use the removed hardware later. In this case, without special equipment and skill at home, it will not be possible to remove the accessories without damaging the rivet and the fabric adjacent to it.

If you do not plan to use the fittings in the future, then it is enough to “cut off” the rivet head with a hammer, anvil or knife, and then install the new fittings in the manner described above.

Important! You may also find useful information on what to do if the hooks on your fur coat are unbuttoned.

I painted

Sand, prime and enamel. Before starting processing, tuck polyethylene under each button.

Ekaterina, try acrylic paint - even with Decoloy, it fits well on metal, and it's inexpensive, so you can tint it again later, if that (any paint will inevitably be scratched over time).

In my opinion, there were acrylic paints somewhere. I'll probably try all the options, at the same time I'll see which method is better.

I also thought about Decola .. And the down jacket is all pure white? I would risk making colored buttons)) Like a rainbow)

Read also: DIY screen cable repair

Do you have any complaints about dry cleaning? They should have warned you about this risk - they did not take my down jacket at all, just because they were not sure of the durability of the button cover

And I myself am the receptionist at the reception point of the dry cleaning)) I cleaned the jacket of my relative, called

In general, they take everything there, but we warn the client about the possible consequences. Once there was a case - two sisters brought two absolutely identical down jackets - one had peeled off, the other was absolutely fine. it even happens.

Better yet, change the buttons to new ones!

Yes, better new ones. In our household (yes, there are still such

), they will steal - and the price is penny, for 5 pieces about 50 rubles. In shoe shops, perhaps, they do this too .. Or in a studio.

Moreover, if you apply acrylic with a brush, it will not work out so beautifully and evenly.

So as for me - either car enamel, or - new.

brush - yes, not as evenly as you would like, but nowhere to go.

I thought about new ones - but this is in another city, so replacement is the most extreme case. I will try to paint first.

Nail polish, maybe? Or acrylic paint

Oh, I'm out of topic here. but who can advise. I got a little stupid: on my keyboard (like a good, fancy Microsoft) the buttons, that is, the letters on them, have already partially wiped out. And this is at the time that I do not work shock at the computer, I have this keyboard for less than a year. By comparison, I will say that the other computer is old (though very cool), she is about 15 or 12 years old - not a single button is erased. Now I am tormented: what to do. The keyboard is comfortable and ergonomic for me, and this is such a nuisance. What should I do? I looked at different sites. There, people ask similar questions - in response, the jokers laugh that they need to get a tattoo.

... But I'm looking at my keyboard and I'm not at all funny - I'm in sadness!

Petrash Oksana, if your Microsoft is on the go, then they must change the buttons, call the service center. Yes, and it's strange that they peeled off so quickly.

No idea where my keyboard warranty is. So many times they shifted everything, did the repairs, that I'm afraid there aren't any. And almost a year has passed. Probably the warranty period has passed.

So the store seems to have a guarantee for 1 year, and there is also a guarantee from the manufacturer, some up to 2 years.

Oksana, we also worn out, so my husband bought glue letters for the keyboard in a store where computers with bells and whistles are sold, they are on a transparent film, glued and everything is OK.

Thanks! I will also look for such letters. It would be necessary to experiment on some kind of "left" plastic, - maybe I'll pick something else to open for a guarantee, - I want "dead and forever"

It is not difficult to change the buttons itself, in stores they sell sets of buttons of 10 pieces with a special piece for their installation, they are not expensive. I remade the buttons myself, you also need a hammer, and repainting is not an option, if the jacket is good, then it is better not to disfigure with repainting. In general, it is better not to take such things to dry cleaning, down jackets are perfectly washed by a washing machine.

I will still paint, there were silver acrylic paints 🙂

Clothing accessories are an additional, sometimes even the main decoration of clothes and accessories. Leather products are especially adorned with various blocks, buttons, eyelets. However, it is not always possible to correctly and reliably install the accessories with your own hands. Often you have to spoil more than one block or button before you install it.
To make this work easier for you, use our tips specially designed for installing blocks, various buttons, denim buttons at home.

It should be noted right away that if you have the opportunity, then do not “skimp” on manually installing the blocks. Entrust this work to a master who has not only experience, but also a special press, various devices and a set of tools. Well, if you do not have such an opportunity, then let's figure out how to independently install clothing accessories using simple tools.

In our practice, in the conditions of the atelier, for the installation of fittings, we use a press and numerous attachments suitable for one type or another of buttons, blocks. With the help of such attachments, the edges of a button or a block are neatly flared, acquiring a "factory" look. But since it is unreasonable to buy a press with attachments and other additional tools for home use, we suggest that you use “handy” tools. In your arsenal, you should definitely have a small hammer and anvil (you can use another hammer), an awl and a few additional tools that you will have to buy at a sewing supply store. One of these tools should be a punch.

It is imperative to use the punch so that the hole is perfectly even and the edges of the fabric do not crumble. The punch can have only one, the smallest size, as a last resort, two (the second is slightly larger). But it is best to buy a set of punches with removable nozzles. It is undesirable to cut a hole with scissors, since from the time of the block or the button will surely "fall out" from it. The hole for the block or button should be minimal, it is advisable to even slightly pull the fabric over the block leg, because the tighter the fabric is pressed against the leg, the more securely it will be fixed.

You need to punch a hole in fabric or leather on an anvil, not metal, but wooden. The tree should be very dense (not loose), for example, the area where the twig is. Other materials can be used that are dense but will not damage the punch point.
Advice: Areas where holes will be punched on knitted fabrics and other bulk materials can be glued with an adhesive cloth.

Using special tongs is the easiest, but not the most effective, way to install the blocks. The fact. that tongs need to be bought of good quality, otherwise their handles may bend, “cheeks” may get mixed, etc. These tongs are quite expensive, so it is better to find such a tool in a sewing accessories store.

With the help of such a tool, you can easily do without forceps and other devices when installing almost any blocks and buttons. This is done as follows. Punch a hole in the fabric or leather with a punch, thread the leg of the block and put a ring on it. Lay a section of clothing with a block on the anvil, and with this punch breaks the leg of the block into petals. Thanks to this special shape of the tip of this tool, the petals will bend themselves on the ring of the block. You just have to fix them a little with a hammer. Do not use too much force, strong blows from a hammer can damage the fabric and bend the block from the front side.
Advice: Place the ring with the convex side away from you, that is, it should repeat the convex shape of the edge of the block.

There is another way to install drums, without any special tools at all. But it is so artisanal that it can only be used as a last resort.
The leg of the block can be “cut” with a knife blade (using a hammer) into several petals, and then trim them and insert into the prepared hole. Put on the ring on top, and bend the petals with a screwdriver. Since there will be a lot of scrap, it is advisable to have a few "extra" blocks in stock.

The easiest way is to install the four-piece buttons (pictured # 2) that snap shut with the ring located at the top of the button. Using the same tool as for the blocks, it is easy to “flare” the button leg onto the petals of both the upper part and the lower part. However, for this type of buttons, special punches are often attached to them. But we know from practice that it is ineffective to use them. It is much more convenient and easier to use a punch that “splits” the leg into petals. By the way, if you often have to install accessories on clothes, various types of buttons, especially antennae (in photo # 1), then be sure to buy several types of dowels in a hardware store. This is a construction nail with a wide head that cannot be bent. Ask your husband to “blunt” several dowels of different thickness. Surely he has something in the garage to do it (emery). Next, you will understand why you need such dowels.

But first, let's figure out how to put on the simplest denim button. Poke a hole in the waist of your jeans with an awl and insert the leg into it. Place the button on the anvil (preferably on a metal surface) and hammer in the leg. It is the leg, not the button.
When buying a denim button, choose a set that has a leg cut, as shown in this photo. This foot will be securely held inside the button. A smooth leg can "jump out" over time or under load.

Now let's try to install a button for jeans of a more reliable design, the leg of which moves freely. This is where you need a dowel cut down on emery. The fact is that the leg of such a button needs to be expanded inside the button itself. You won't be able to "get close" to it without a special tool. But with the help of a sawn dowel, this is easy to do. And since the dowel does not bend, it can reliably expand the leg with it.
But first, pass the leg into the belt, put a button on top of it and see how far the leg comes out of it. It may be necessary to "bite off" the edge of it with pliers. Otherwise, your leg will simply bend and then not be flared.

The antennae button (No. 1) is also installed approximately the same way, only this operation needs to be performed only for the upper part of the button.The lower part is much easier to install. To install the second part, you can buy a special tool with a notch inside in the store. But if you do not have one, then you can use a metal plate with a hole exactly the size of the "pimples". Insert this pimple into the hole of the metal plate, and “hit” the leg with a hammer from the back of the garment. The antennae button is very difficult to install without special tools, so buy more of these buttons than you need.

The latter type of button, which is sometimes used in knitted garments, is not difficult to install. However, some advice can be given too. First, make sure the petals on the bottom of the button fit exactly where they should be. Sometimes they are bent, so you have to bend or align them with pliers so that during installation all the petals “go” into the upper part.
If for some reason the button is not installed correctly, remove it and put another, new one. It is better not to use the damaged button anymore, since it will no longer be securely held. They are inexpensive, so buy them with a margin.

How to open a mini-studio
At home, a press for installing buttons is not required, but in an atelier, such a tool is definitely needed, especially if your atelier is engaged in the repair of leather clothes, bags and other accessories, where various accessories are often used.

Sewing and cutting technology for natural fur
Sewing fur or leather can only be done by a professional with special equipment, tools and experience, including tools for installing clothing accessories. However, in some cases it is possible to install buttons or blocks without special tools and fixtures.

Recommendations for working with leather
Almost any leather clothing, accessories use various accessories. To "punch" a neat hole in the skin for installing a button or a block, you must use a special punch.

How to sew curtains yourself - small tips
For curtains, special accessories are often used - eyelets. The eyelets outwardly resemble blocks, however, it is impossible to install the metal eyelets on your own, since without a special press you will not be able to accurately flare their edges. Use plastic eyelets. Their halves are snapped to each other and therefore installation will not cause any difficulties.

Gaskets and adhesives
When installing accessories on clothes made of loose, knitted fabrics, be sure to use adhesive fabrics. The glued sections of the garment will be securely held between the parts of the block.

Video (click to play).

Do you have a sewing machine and love to sew? Then this site is for you. Professional craftsmen will tell you how to make minor repairs to a sewing, knitting machine. Experienced technologists will share the secrets of tailoring. Review articles will tell you which sewing or knitting machine to buy, a mannequin iron and many other useful tips you will find on our website.
Thank you for viewing the entire page.

Rate the article:

Grade 3.2 who voted: 85