In detail: do-it-yourself nivona coffee machine from a real master for the site my.housecope.com.
You can carry out minor repairs of the Nivona coffee machine with your own hands at home by following the instructions below for eliminating common breakdowns:
Disassemble the grinder and remove any coffee residues from the burrs.
Call a technician to repair or replace the grinder motor.
Clean the channels of the fuser from blockages and scale accumulated in them.
If the problem is not resolved, call the wizard.
Replacement of the drain valve and inspection of components for leaks is required.
It is recommended to contact the service center.
If the system detects a problem (s), it will display a text error message on the display of the coffee machine.
Fill the hydraulic system with water.
Grasp the hot water and steam valve control knob and turn it to the right.
Pour fresh water into the tank.
Insert the water tank correctly.
There are no coffee beans.
Beans do not enter the grinder.
Pour the beans into the container.
Use a teaspoon to gently move the beans and brew the coffee.
The coffee grounds tray is full.
The contacts on the tray are wet or dirty.
Empty the coffee cake from the tray.
Wipe and clean the contacts thoroughly.
The coffee grounds tray is not inserted correctly or is not installed.
There is dirt or moisture on the contacts on the back of the tray.
Remove and insert the waste coffee chute correctly.
Wipe or clean the contacts.
If the recommendations from the table did not help to eliminate the malfunction of the device, contact our service center for diagnostics and repair of the Nivona coffee machine!
We suggest that you familiarize yourself with the cost of the main work on the repair of coffee machines on the Price List page. The exact cost of repairing the Nivon coffee machine will be known only after the diagnosis!
Video (click to play).
What is a good and high-quality coffee machine for? Of course, for aromatic hot coffee in the morning. The brewing process of this wonderful drink is almost completely automated and requires minimal human intervention. The filling of the device implies the presence of many mechanical parts, electronic circuits, as well as a miniature hydraulic system. However, everything soon fails and these necessary devices are no exception. In the event of a breakdown of coffee machines, there are only two options: take it to the service or repair the coffee machine yourself.
Water supply interrupted. There is a blockage in the pipeline of the mechanism;
The coffee has acquired an unusual smell or taste. In this case, it is not always necessary to fix something with your own hands. Perhaps you just need to change the coffee tablets, and there is a very wide selection of them: Dolce Gusto - Dolce Gusto, Nestlé, Jacobs, etc. Alternatively, the filter of the coffee machine may be clogged. Cheap plastic can be another factor affecting the taste and smell of coffee. During operation, some parts of the machine heat up to 130 degrees, which can cause the plastic to melt;
Cold coffee. Most likely, your heating element has stopped working;
The espresso machine is not working. Many factors can affect this: the motor is broken, the pump does not work, the power cable is broken;
Water dosage exceeded (most often found in capsule coffee machines). Most likely, the breakdown lies in the engine or in the timer circuit.
The brewing time setting circuit does not work or the dosage into the cup is incorrectly adjusted. Of course, you need to focus on the model of the device and its brand, but a common reason is the improper operation of the engine control circuit, or one of its compartments.
If you are not sure that the repair of the coffee machine is within your power, then it is better to refer it to specialists. If the device is under warranty, then it is not worth disassembling it at all, it will instantly lose the warranty.
To repair the coffee machine, first you need to disassemble it. And how to do it correctly, step by step is described below.
It is necessary to find the back wall of the device, or rather the set screws. Unscrew with a screwdriver, pliers or whatever is at hand and is ideal for such work, set aside. It is worth noting that there may be several options for screws. They can be hidden, cruciform, or with a convex head;
The screws are removed, it is logical that the cover should be easily removed. However, if it cannot be removed, then there are hidden locks in the case. Most often these are ordinary plastic latches and they are located at the bottom of the back cover. From the outside, such a lock can be easily opened with a knife or a small screwdriver;
Finally, access to the "insides" of the machine has been obtained, it's time to start repairing it.
And so let's go in order. There is a blockage in the water supply pipe. In such coffee machines as: Delongee, Bork - Bork, Ariete - Ariete and others, cleaning is done using a long and thin rubber hose. It must be run along the duct and thereby break through the blockage. However, it will be much more effective to use special brushes on a flexible leg.
It is a little more difficult to clean the filter with your own hands. With frequent use of the coffee machine, the filter accumulates: scale, coffee residues, salt plugs, etc. Cleaning must be approached carefully, but the most important thing is to do it according to the instructions, otherwise you can violate the integrity of the part. In the process, it is allowed to use a soft swab sprinkled with alcohol. Rinse the filter thoroughly after cleaning.
If you are unable to solve the problem yourself, contact a Saeco espresso machine repair center.
The coffee machines of the Mulinex, Krups, Roventa, Saeko firms have another problem - water leaks. In them, the valve regulating the water supply is located practically in the filter. If the coffee does not stop pouring, most likely a worn valve is to blame, which leads to this phenomenon.
The valve cannot be repaired; in this case, only replacement with another new part is available. To understand whether the valve has broken, it is enough to pour coffee out of the machine, disassemble, rinse and inspect well for possible breakdown.
Initially, it is worth checking if everything is in order with the power supply. See if the cable is broken, check the grounding.
It also happens that household coffee machines made in China simply lose contacts (they go away). Such cases were encountered with more famous brands: zauber, melitta, trevi. It is enough to check all the wire connections with the control circuit.
A common case for Senseo¸Siemens, Ufesa machines, they have low-quality thermostats built into them. To diagnose it, you need to remove one wire from its end and "ring" the contacts with a tester. If all is well, then the chain will be closed.
The heating element may also fail. Diagnostics is carried out in the same way as a thermostat. Replacing it with a new one is difficult, it will be easier to try to repair or buy a new coffee machine.
Very often, on the shelves next to the coffee machine, all the necessary accessories are sold that you will certainly need for the correct operation of the device. And for cleaning technical parts, it is definitely advised to buy special flexible brushes.
The principle of operation and repair of capsule coffee machines is slightly different from drip coffee machines. A small container of coffee powder is attached to the inside of the machine, the piercing mechanism is manually clamped. After use, the capsule is disposed of. Inside such devices, most often there are no temperature sensors, but there is an ordinary pump that runs on a timer. The water flow rate has been calculated in advance.If the water supply is carried out with the wrong dosage, then the time supply circuit may have broken.
Repair of coffee makers often does not depend on the brand or model; in general, they differ only in nuances. This can be the shape, as well as the location of parts, size, different types of sensors. The very principle of operation of the coffee machine does not change.
Any professional inspection for breakage always starts with the cord. It makes no difference whether it is a capsule or drip coffee machine repair. Then the power board is checked (if any), it is worth noting that the coffee machine has a lot of filters, diode bridges, and also transistors. All this must be inspected for burnout. This is the only way to recognize the true cause of the equipment malfunctioning.
If the coffee maker does not grind coffee, then the first step is to check the presence of corny beans. Isn't that the point? Disassemble and clean the knives from adhering coffee or rust formation (with prolonged use). If this does not help to eliminate the malfunction, most likely the problem is in the engine. Here it will not be possible to repair the breakdown on your own, you need to contact the service center for help.
Another common problem with Nivona coffee machines is that coffee does not come out of the dispenser. The reasons for this: clogging of the thermoblock channels, the formation of scale in these channels, or the failure of the injection pump. For repairs, you first need to clean the channels from possible blockages and scale. If the problem is not resolved, the charge pump should be checked, it may be out of order.
Is there water leaking from your Nivona? This also often happens due to damage to the seal of the dispenser or the water tank. Leakage of the connecting pipes may also be the culprit for the leak. The device can be repaired by replacing damaged seals and gaskets, as well as checking the quality of the pipe fastening.
If the coffee maker does not turn on after power surges in the network, it is most likely that the electronic board is out of order. Here repairs are rarely advisable, you will have to buy a new one. However, so that this does not happen again, we advise you to install a voltage stabilizer to protect electrical appliances.
There are times when the Nivon coffee machine makes noise during operation. The sound is emitted by the pressure pump due to the fact that the water tank is empty, or the pipe through which the water is supplied is simply squeezed. In this case, it is not so difficult to make repairs; it is enough to eliminate the pinch point. Sometimes the reservoir also needs to be replaced.
If the coffee is drained into the drip tray, and not through special spouts, as it should be, then the drain valve is faulty. You can try to clean it, but most often you have to replace the drain valve for repairs.
Finally, we recommend watching a useful video on the topic:
