Philips Saeko 8325 coffee maker DIY repair

Detail: Philips Saeko 8325 coffee maker DIY repair from a real master for the site my.housecope.com.

In order for a high-quality Saeko coffee machine to serve for a long time and without problems, it is necessary to use it correctly and maintain it correctly. However, this household appliance cannot last forever. Breakdowns or malfunctions can, at a certain moment, disable the unit for the production of a fragrant and invigorating drink. What will help in this situation? Only competent and high-quality repair of Saeco coffee machines.

The range of factors that cause breakdown of this type of household appliances include:

sloppy service;
improper operation;
the use of unacceptable varieties of raw materials;
incorrect parameter setting.

Most often, equipment repairs may be required due to improper operation of Saeco equipment. Sometimes the breakdown is provoked by the use of coffee beans of precisely those varieties that absolutely cannot be used in these models. In addition, malfunctioning of the coffee machine can be caused by incorrect parameter settings. The photo clearly shows what is happening with the unit in this situation.

Since Saeko coffee machines belong to the category of rather whimsical devices, it is optimal to entrust their repair to highly qualified professionals. However, a number of faults can be eliminated by yourself. These failures include:

elimination of the formed plaque;
the need to clean the cappuccino maker;
restoration of the lamp on the switch;
elimination of the increased noise level during the operation of the unit.

For example, you can do it yourself to remove limescale deposits from your Saeco espresso machine. To do this, it is enough to use a special video as an instruction. The elimination of the problem is accompanied by the use of special tablets and liquids. You can also use other compositions that help to remove residual oils from the internal structure of the unit.

Video (click to play).

You can clean the cappuccino maker yourself. For this, it is recommended to use special tools. The photo shows the most effective formulations for carrying out this kind of work.

It is also very important for the owners of such household devices to take into account that the repair of the Saeko coffee machine can be omitted if diagnostics are carried out in a timely manner. It is also worth using only clean water during the preparation of the product. There is no need to ignore the instruction. By following the rules in place, you can avoid malfunctions.

The user can repair the switch with his own hands if it stops working. Sometimes it is enough to check the correct connection of the Saeko coffee machine to the network. The photo shows perfectly how the connection should look like, ideally.

Another commonplace malfunction is the inability to pour a drink. To eliminate the problem, sometimes it is enough just to check the correct installation of the capsule in the device. The lid in the brew area must be tightly closed and the water container must be completely filled with liquid. If the pump is operating too loudly, you should check the correct position of the container with water. In this case, the container must also be filled. Sometimes it is necessary to descale the components of your Saeco espresso machine. How to do this work can be seen in the photo.

A self-repair unit from the manufacturer Saeco can be made when:

the coffee is barely warm;
water flows from the device;
the mechanics does not function.

If the drink prepared in your Saeco espresso machine is not hot, it is recommended to warm up the cup first. During this manipulation, you should check whether scale has formed. In the photo you can see how this procedure is performed. Self-repair of the device can also be carried out in the event of a water leak. The Saeco-branded device sometimes accumulates liquids in the compartment reserved for used capsules. In this situation, you will need to evaluate the correct installation of the capsule in the coffee machine.

If the leak is not eliminated by this method, do not experiment any more. It is best to contact a service center specializing in the repair of Saeco espresso machines. Experts recommend that you give up the temptation to open the body of equipment on your own. Such a decision can result in irreparable consequences for the owner of the device. Disassembling a Saeco machine requires skill and experience. Otherwise, the equipment may be irretrievably damaged and broken.

Do-it-yourself Saeco coffee machine repair is difficult because the body is not separable. The cover is removed from above, the master unscrews a bunch of screws ... the insides of the heavy unit are pulled up. The procedure is dreary, experienced repairmen help with a screwdriver, the authors just pretend: the action is not easy. The review will first consider the principle of operation, the features of the Saeco Vienna coffee machines, then the procedure for disassembling the units, and to top it off, let's say a few words about the internal structure. After reading the first two sections, the third is not needed, the mechanics, the electrical part are devoid of complexities.

Saeco will always help you identify the problem with error codes. Few electronic components that cannot be replaced. Rewind the motor windings, the magnetic shaft rarely breaks. A typical housewife can clean the boiler.

Saeco Vienna coffee machines in question are able to:

Grind coffee.
Brew ground coffee.
Make milk froth by preparing various drinks.

The Saeco Vienna coffee machine can brew ground, instant coffee. Undoubtedly. Pour the powder into a container for beans, however, the strength of the drink may differ slightly from the usual one. Coffee machines dispense the amount of beans / water, pouring powder inside does not mean that you will get the wrong drink with a high degree of probability. The result will be different from the traditional one. The dosing process is hushed up by the instructions. An instructive video was posted on YouTube: a repairman details the functioning of the Saeco automatic coffee dispensing group, saying the following:

The coffee machine "says" to the coffee dispensing group: it's time to brew, the engine sets in motion the mechanism that moves the cup to the position on the cylinder, pushes it up, reaching the stop.

The specialist continues to say: 8 grams of ground coffee is placed inside. The video describing Vienna Plus allows you to understand: setting, batching are carried out by mechanical methods. The plus sign means: in the model, the dose is changed, it is done with a special handle that rotates the outer nut of the coffee grinder by means of a rod with a gear. That is balanced by a spring, the preload is changed by a regulator. Vienna uses a similar mechanical tuning scheme. Throw in instant coffee inside - it will pass through the millstones, settle in the cup. The process continues, the mass reaches critical, "the coffee machine tells the coffee dispensing group: it's time to brew."

By purchasing the Vienna Plus model, we get the opportunity to dose the taste by changing the concentration. The coffee machine does not strictly work with roasted beans. Avoid putting green coffee inside, the reason is simple: the beneficial properties will be lost, destroyed by heat, the operation is meaningless. Will the Saeco Vienna Plus espresso machine work. Of course, yes, the millstones do not care what to grind, brew, even walnuts. The Saeco coffee dispenser is fully automated:

The ground coffee is poured onto a flat bowl that runs inside the cylinder.
After the end of grinding, a mechanical signaling device is triggered, starting the servo drive.
The piston with the cylinder falls to one side, begins to move along the runners towards the stop, where the brewing will take place.
After the end of the procedure, the piston, the cylinder begin to move back, the inclined cover is triggered, becoming perpendicular to the plane of movement, removes the tablet, dropping it into the waste material receiver.

Read also: DIY bathroom pipe repair

My breakdown - saeco xsmall leaked and this regulator is to blame - it's called SAFETY VALVE 16-18 BAR V2 P0049 ASSYIn my typewriter, it is made of plastic, and over time, the spring on which the rather heavy pump is located sags and the plastic part simply breaks off. a new part costs 20 euros and comes with a metal tipTherefore, if your machine is running and it's not about an overfilled pallet, the cost of repairing the replacement of this valve can go up to 4 thousand rubles. I chose to buy a new typewriter.Coffee makers of various types are permanently operated equipment. If the coffee machine breaks down, the schedule also changes. It is difficult to work in the usual rhythm without drinking your usual morning coffee. The reasons for the breakdown are different, from an unsuccessfully purchased model to poor maintenance of the unit. Most faults can be rectified by yourself. If the control unit breaks down or the board burns out, you cannot do without the services of the service center.The simpler the mechanism, the less malfunctions it can have. Repair of drip coffee makers consists in flushing the filter mesh from accumulated oils. When using tap water, the tubes become clogged with scale. It is enough to buy a special product and, according to the instructions on its packaging, rinse the drainage system. It is not worth saving and replacing the special composition with vinegar. Soon he will have to change the gaskets, which he will corrode.When the drip coffee maker has stopped heating, you need to check the wire and contacts. If they are in order, then the heating element has burned out. Replacing it will cost more than buying a new coffee maker of the same type.Most of the problems with capsule coffee makers are related to coffee pills:

incorrectly inserted;

other firm of the capsule;

the lever is weakly pressed.

It is necessary to buy only tablets of the same brand as the coffee maker, carefully throw their piercing mechanism and press the lever rather sharply. If this does not help, the mechanism should be disassembled and cleaned.In carob models, sealing is most often violated. Water begins to drip from under the horn. The reason is the O-ring is dirty, or it is destroyed. The ring must be rinsed. Replace if cracked. You can not put car pads, and from washing machines. In them, rubber has a different composition, it is toxic to food.Spout leaks are more common in DeLonghi coffee makers than others. There is no need to rush to the service center, repairing a Delongy model coffee machine with your own hands is quite simple. A detailed description with diagrams is in the technical passport for the car.Each model has its own weak points. Clogged filter becomes the most common cause of malfunctions in the machines "Saeko Minuto", "Roventa", "Nescafe Dolce Gusto", "Krups».Changing the high pressure pump is most often necessary for Vitek coffee makers. The coffee starts to flow poorly and does not brew well.Coffee machines "Saeko", "Delong", "Philips" have a complex electronic system and a drive that is sensitive to voltage surges. They have disposable overload protectors inside them. When there is a power surge in the network, protection is triggered, and they no longer start. Dismantling and replacing the fuses of the Saeco Minuto espresso machine with your own hands is possible if you have spare parts and knowledge of electrical engineering.The main reasons for the breakdown of coffee makers of all types are the same:

filters are clogged;

use of untreated tap water;

power surges;

neglect of equipment;

lack of regular cleaning;

wear of parts during long-term operation.

If the coffee maker breaks down, you need to disassemble it, rinse and clean it, check the integrity of all seals and parts. After that, in most cases, the unit starts to work.

Before repairing, you should analyze the type of failure, and the possibility of self-troubleshooting in the Dolce, Delong and others devices.

To repair Saeco coffee makers, be aware that the casing cannot be disassembled. The cover is secured with several screws. First you need to remove it, then dismantle the teapot and other units through the top. It is inconvenient to do this, it is necessary to put screwdrivers and various stops.

The main reason is that the filter is clogged or an air lock has formed in it. If your pump works and no water flows, try fixing it yourself. You need:

Open the lid of the water tank. Pull out the filter carefully. On some models, you need to slide the release latch.
Clean the filter.
Turn it upside down with the inlet and outlet tubes. The filter is completely filled with water.
Fill the tank and refit the filter under water.

Foam is weak or hot milk is pouring into the cup instead. The reasons for the breakdown are simple:

the quality of the milk does not match;

poor care - tubes clogged.

relatively recently entered our life, and this happened thanks to the advent of coffee machines.
These are new household appliances of the 21st century, which are able to fully automate the process of preparing a drink. Modern devices are multifunctional and support various modes of operation. With their help, you can get a drink of various strengths and even adjust such a parameter as aroma.

Which operating mode should be selected when first switched on?
And how to properly operate the machine so that there is no need for premature repairs?

What to look for in the first place and how to avoid typical mistakes when operating a household appliance

When using a household appliance, remember that hot water is used, which is under pressure. Also, in the process of operation, the parts of the machine rotate. It is strictly forbidden to remove the protective covers when the device is connected to the mains. To avoid burns, do not remove the coffee filter while the machine is running, as it is under pressure.

Pay attention to the status of the ready light.If it shines or periodically lights up - this is a normal mode and the device is ready for use.
Before switching on, make sure that the drinking water tank is completely filled and that the inlet valve is in the “closed” position.
Press the ON / OFF button and set it to the “I” position.
Check the status of the ready light.

Insert the filter into the filter holder as shown in the picture.

Install it in its seat.

Lock in a smooth motion (from left to right).

Dispense steam by turning the selection dial. This operation is necessary only at the very beginning of the operation of the machine.

After the first 150 cc. cm of water passes through the filter, return the regulator to its original position.

Remove the filter and empty the remaining water. Remember that there is no need to change it after a few cups of coffee, just rinsing is enough.

Take the measuring scoop out of the philips saeco poemia class for loading ground coffee.

Add powder in a ratio of 1-1.5 for one cup, and 2 for two. Remove any coffee residues from the edges of the holder.

Place the holder in the brewing unit.

Lock it in place (turn it from left to right until you hear a characteristic click).

Take one or two pre-warmed coffee cups and place them under the nozzles.

Turn the selector dial to the “” position, the beverage preparation process will start.

When the desired amount of coffee has been obtained, return the selection knob to its original position. Wait a few seconds until the process is completely stopped.

Your drink is ready and you can enjoy your freshly brewed coffee. And one more little tip, clean the filter after each use of the household appliance.

Manual espresso machine Philips Saeco HD8325 Poemia Is a classic representative of manual semi-automatic devices, which are ideal for "semi-professional amateurs". I use this term in a figurative sense, however, completely "beginners" should understand that this is not an automatic coffee machine.

This model, due to its small dimensions, is perfect for home use or for a small office, since the water tank is designed for 1.25 liters of liquid. This volume is enough for several servings of the drink. Perfect for, for example, a bachelor who drinks 2-4 cups of coffee a day. Or for a couple. The coffee maker dispenses two cups at once, but keep in mind - two "pair" approaches and hello, add water. For admirers of other hot drinks, the possibility of serving boiling water is provided. The austere case design looks appropriate in any modern interior:

Signature Crema filter for dense coffee crema and manual cappuccino maker for dairy delicacies

The Philips Saeco HD8325 Poemia coffee maker is suitable for both pre-ground coffee and single portion pods Easy Serving Espresso (E.S.E.)... By brewing coffee under high pressure of 15 bar, the finished drink turns out to be no worse than in coffee shops and restaurants, and very little effort is required on your part.

Since this is not a coffee machine, then when using coffee beans, you will have to grind it first on a separate coffee grinder. And in any case, you will need to put the coffee in the filter of the horn yourself. The proprietary Crema pressure filter ensures that your espresso has a long-lasting coffee crema.

By the way, Saeco considers this filter to be one of the best in its class. It is quite complex in design, the basket itself is one-bottomed, almost professional, with a diameter of 54 mm. And in the horn there is a cunning design with a plastic valve on a spring, which is closed at rest and opens only when an ideal pressure for brewing in the region of 8-9 bar is created in the horn. The peculiarity of the Poemia horn is that it is spring-loaded in the horizontal plane, this is done so that you tightening the horn in a group just bring this valve to a tightly closed state.

If there is such an "uluchshayzer" in the cone, you don't have to bother with the correct grinding of the beans and competent tamping, although I still recommend tamping the coffee evenly with the bottom of a measuring spoon, and keep the whole structure as close to the filter as possible so as not to break the plastic elements from excessive zeal ... The handle of the horn itself is pasty here, and this is sad.

And keep in mind, from the factory, a filter for coffee in pods (E.S.E. bags) can be inserted into the horn from the factory; to use ground, you need to replace it with a regular one (included).

Philips Saeco Poemia scope of delivery: measuring spoon, it is also a tamper, a 54 mm basket basket with an integrated pressure crema valve - a small white pin in the center, two coffee filters, on the left - for 1 or 2 portions, on the right - for ESE pods, on the right is a black adapter, it is placed in the horn under the pod filter.

Thanks to the built-in manual pannarello cappuccino maker (metal tube with a nozzle, at the outlet - several hot steam holes, the principle of operation is similar to a spray bottle), you will turn milk into fluffy persistent foam and you can pamper yourself with milk coffee drinks, be it cappuccino or latte. It is better to use fatty milk and the most "protein", plus - chilled.

Easy access to removable care items, plus heated cups at the top

Water container in the coffee maker Philips HD 8325 Poemia, drip tray and filter are directly accessible so they can be easily removed for cleaning. A single rotary switch is used for control, so that, in principle, anyone can easily master this device. But the shutdown button is located on the back panel, which may not be very convenient. Especially in light of the fact that there is no automatic shutdown here. The cord is 80 cm long, so think before buying if this length is enough for you.

Of the pleasant bonuses, I can mention a storage compartment for a measuring spoon and a panel for warming cups at the top. But here you need to understand that it starts to warm up only after turning it on. If the coffee maker is not always on, it is extremely difficult to wait for a noticeable heating effect. For I want to immediately pour and drink.

Saeco Poemia Class (alternate model name) has "Subtle Moments". The 1.25 liter water tank is opaque, it is difficult to see the remaining level by external inspection, you have to look into the thin "window" from the front behind the horn. And the drip tray is also not happy with its scope. For the sake of fairness, I note that all carob cars of this class are "refueled" in terms of volume approximately the same. But the dimensions are minimal!

Plus, some reviews about the Philips Saeco HD 8325 warn that it is leaking. This is due to the crooked insertion of the water container into the device. The container can theoretically be skewed and start to snot from the bottom, it has a valve at the bottom. But personally, I managed to achieve this "effect" only on purpose. I would be grateful if the owners tell below how they are with this problem.

Further, the on / off button is located at the back, which is not very convenient.

And perhaps the most important thing: the cappuccino maker moves very slightly away from the body of the coffee maker, which makes it difficult to crawl up with a container for frothing milk. The high edge of the drip tray interferes.

You can find two modifications on sale: Philips HD8325 / 79 and HD8325 / 09... Phillips usually has a color code after the fraction. But in this case they are both black with chrome elements. To be honest, I don’t know how they differ. If anyone knows - write it down in the comments, please.

Philips Saeco HD8327 has an all steel body

The model described in the review is almost completely identical to the espresso machine Philips Saeco HD 8323 39 Poemia (second name - Saeco Poemia Focus). The difference between them lies in the absence of the last panel at the top for warming cups. More precisely, the top plate of the 8232/39 is plastic, and given the passiveness of heating, it has almost no effect at all.Therefore, the manufacturer honestly does not even declare such an option (as some competitors do).

Although, strictly speaking, there are still differences, but they are more of a visual plan. Philips Saeko HD8323 has not metal, but plastic: a cup holder under the horn, a front panel with a main switch and a Panarello attachment. And by the way, the plastic panplate is a little worse wiped off the cooled milk, if you did not wipe it right away.

If the HD8323 were noticeably cheaper, then one could pay attention to it (and it still costs if it is cheaper), but in light of the fact that the prices for both modifications are, one might say, the same, if available on sale in your region, take the HD8325 ... Unless, of course, he suddenly leaves the gap in value. Otherwise - feel free to take Philips Saeco HD8323 09... By the way, what is the difference between modifications with 39 and 09 after the fraction, I, again, do not know.

Also on the market there is a "premium" version of the monitored espresso machine, the body of which is made of stainless steel - Philips Saeco HD8327 99 Poemia (also known as Saeco Poemia Top). Actually, this is a complete analogue of the 8325, but, again, in a metal case. It looks more solid and expensive, as well as it is worth. Plus, according to my observations, the build quality is slightly better, the gaps are smaller, the seams are smoother. Although it is normal and the "original".

In addition, a limited edition coffee machine was released for the 30th anniversary of Saeco Philips Saeco HD8425 / 21 Poemia... The car is completely identical to the heroine of the review, with the exception of the external design (black with copper splashes, it looks, in my opinion, rather controversial) and the presence of an automatic shutdown function after 30 minutes of inactivity.

Despite the fact that there are some nuances, the Philips Saeco Poemia coffee maker in the face of any modification: HD8323, HD8325, HD8327 or HD8425 in terms of price / quality ratio is one of the best choices in the amateur "horn" class for making classic espresso due to its effective appearance ( cream foam) and to taste (stabilizes the pressure in the filter, simulates pre-wetting) to the pressure valve in the bottle. For about 10-12 thousand rubles, I definitely recommend buying.

P.S. If you are a little "scared" by the need for manual operations for making a cup of espresso, and the budget does not allow you to boldly look in the direction of automatic coffee machines, then I strongly recommend that you still familiarize yourself with a selection of inexpensive "automatic machines". In fact, the price difference there is not as catastrophic as it might seem at first glance.

Video (click to play).

But if the financial issue in buying a coffee machine outweighs, and laziness "hits the hoof", while your potential for coffee consumption is small, then maybe you should consider capsule systems?

Rate the article:

Grade 3.2 who voted: 85