Mazda 323 DIY repair

In detail: Mazda 323 do-it-yourself repair from a real master for the site my.housecope.com.

Cars of these models are available in sedan, hatchback and compact versions with gasoline and diesel engines.

The Mazda 323 is powered by a water-cooled, four-cylinder in-line engine located across the direction of travel.

To prepare the working mixture, depending on the model, either a carburetor or an electronic fuel injection system is used, which, as a rule, does not require maintenance.

The front wheels are driven via a manual gearbox or a 3 or 4-speed automatic transmission.

The Mazda 323 is also available in an all-wheel drive version. Additional elements are required to drive the rear wheels. The drive of the front and rear wheels is connected by a cardan shaft. The propeller shaft drives the rear wheel differential, from which two drive shafts extend to the rear wheels.

The steering gear is located to the left of the engine and is connected to the steering levers by means of rods. Some models are equipped with power steering.

The braking system consists of a brake master cylinder, a brake booster, disc brakes on the front wheels and drum brakes on the rear wheels. Some models also have disc brakes on the rear wheels.

Depending on model Mazda 323 from 10/89 can be equipped with anti-lock braking system (ABS).

Greetings to all the names of the breeders.
FAK (Frequently Asked Questions) RUSHEN EDISHEN by MAZDA SURNAME / 323 / Protege

BODY and OPTICS (repair, replacement, maintenance)

REPORT ON MANUFACTURE OF ANTI-FOG PROTECTION AT MAZDA S-WAGON SURNAME
REPORT ON MANUFACTURE OF ANTI-FOG PROTECTION AT MAZDA S-WAGON SURNAME
FOG on familia (if tumanka is broken, where and how to buy)
Fog light bulbs Replacing fog light bulbs (which ones to install and how to do it)
REPORT: Replacing bulbs in fog lights on Mazda Familia (replacing bulbs in fog lights photo report)

Video (click to play).

Adjustment of round foglights
Tumanki

We remove the headlights on a restyled car
removal of headlights from the family

Removing and replacing the “povortnik” light bulb on dorestyling is very simple 🙂
We remove the front turn signal and do whatever we want with it

Trunk release cable / fuel filler flap
cable in luggage How to make? solutions to the problem, suitable for the hood cable

What is better to put as "wipers".
Wiper blades

Disinfection of a heater (air conditioner) on Mazda Surnames (no photo)
Car dealership disinfection. Without photo.

Installation of standard fog lights on Mazda Surname / 323 BJ
Established PTF

Remove and disassemble the side rearview mirror Mazda Familia 323 Protege BJ
Mazda Familia BJ5P Mirror Disassembly Report

Replacing the valve stem seals on the ZL-DE engine (similarly changes to ZL-VE and ZM)
Report. Replacing MSCs with ZL-DE.

Spark plugs - sharing our experience
Which candles to put (which ones to choose)
How to get to the candles on ZL? (how to change candles yourself?)
candles. in thought. (iridium vs. platinum per family)

WHAT ENGINE DO I HAVE ZL-VE or ZL-DE.
The differences between the configurations and modifications of the Familia S-Wagon (visual photos) can also be understood by looking at the tachometer, if the red zone starts at 7500 rpm then you have a ZL-VE although it is better to compare it with the photo

Problems with the temperature regime of the internal combustion engine (thermostat)
Help people with the temperature ((

Maestro Andrew washes the nozzles with the hand-made miracle device
REPORT! cleaning the injector LAVR'om for Mazda S-Wagon

PETROL PUMP (removal) including in the C-Car with a driving rear sofa
Fuel level sensor

Fuel filter on all-wheel drive versions
Fuel filter for BHA6R ICE B6

Where is the air filter located? 🙂 no need to laugh, anything can happen 🙂
air filter - Mazda?

Replacing the air filter (photo report) and discussion - which one is better to put?
Replacing the air filter on Mazda Surnames for dummies

Replacing the main oil seal of the internal combustion engine and the oil seal of the input shaft of the automatic transmission (in the future there will be an advanced topic)
Replacing the main oil seal and input shaft of the automatic transmission

The valve in the BDZ area, we repair the tubes ( READ TO EVERYONE WHO IS GOING TO WASH BDZ AND KXX. )
Electro-pneumatic valve, repair of broken landing tubes.

Idling problems after flushing BDZ and KXH
The trouble.
Idling (no warming up revolutions after cleaning BDZ and KXX)
Tell me about the KXX. (a little device on the example of a broken KXX)

Air conditioner - functional test
How to check if the condo is working? (there are pictures from the book)

Problems with starting on a cold one, the engine starts, but immediately stalls, starts normally on the 2nd attempt (like UTT - "Toyota morning trouble")
It starts up perfectly but after it stalls
Stalls on cold :(
Engine Trouble ZL (solution to the problem - THE PLATE IS INCORRECTLY INSTALLED ON THE CRANKSHAFT PULLEY WHEN CHANGING THE TIMING - the crankshaft position sensor cannot read the rpm)

Knock sensor (by the way, the code in the subject is suitable from the Mazda-3 parts codes)

Installation of a radio tape recorder (replacement, pinout of wires, etc.)
Music in Mazda Surnames (connection).

Non-standard tricks (anti-theft systems)
A very strange problem

We supplement the car with a rear fog lamp
Rear fog lamp

The HOLD mode in the automatic transmission stopped working
HOLD does not work

Repair of the ignition lock (the car does not respond to the turn of the key in the lock, it will not start)
photo report of the reanimation of the ignition switch

Repair of a ribbon cable, spring wire Airbag steering wheel Mazda 323 Familia Protege
Report: Repair of the steering column cable

Recovery of errors P0753, P0758, P0763 Automatic transmission errors Mazda Familia 323 Protege P0753, P0758, P0763

External SHRUS 2VD and 4VD - a summary topic of applicability
EXTERNAL family grenades

Replacing the rear gearbox oil seal for 4 HP
oil seal - what to call, photo (there are pictures from the book)

Replacing the rear wheel bearing on Mazda Surnames / Ford Laser 4VD
Photo report replacing rear wheel bearing 4WD BJ5P

Discussion of the size of the rims for 14 inches (technical parameters)
Will 175x70x r14 fit?
Wheels 14 ″
And what is the size of tires and disks on family names? (who and what set himself, experience)
Wheels R15 for Mazda Familia 1996 (there is a scan from the book for all possible sizes of wheels and tires for Mazda surname)

Camber angles on the BHA6LP 4 WD body
Gathering. camber on Mazda Familia

Report on replacing the rear silent block of the front arm in a garage
Report on replacing the rear bushing of the front arm

Read also: DIY ss20 rack repair

3.0 Engine lubrication system
3.1 Oil circuit
3.2 Checking the oil pressure
3.3 Checking the oil pressure sensor
3.4 Removal and installation of the oil pan
.

4.0 Engine cooling system
4.2 Antifreeze concentrate
4.3 Changing the coolant
4.4 Checking the tightness of the cooling system
4.5 Removing and installing / checking the thermostat
4.6 Removal and installation of the water pump
4.7 Removal and installation of a radiator
4.8 Removal and installation of the fan motor
4.9 Checking the thermal switch
.

5.0 Ignition system
5.1 Safety measures when working with an electronic ignition system
5.2 Checking the ignition coil
5.3 Checking the ignition cable
5.4 Checking / adjusting the ignition timing
5.5 Removal and installation of the ignition distributor
5.6 Spark plugs
5.7 Spark plugs for MAZDA 323
.

6.0 Power system, carburetor, fuel injection system
6.1 Rules for cleanliness when working with the power supply system
6.2 Removal and installation / check of the sensor in the fuel tank
6.3 Removal and installation of the fuel tank
6.4 Removal and installation of the fuel pump
6.5 Removing and installing / checking the fuel pump
6.6 Removing and installing air filter
6.7. Carburetor
6.8. Fuel injection system
.

7.0 Diesel engine
7.1 Principle of operation of a diesel engine
7.2 Removal and installation of toothed belt / timing gear adjustment
7.3 Diesel preheat system
7.4 Checking the preheat system
7.5 Removing air from the power supply system
7.6 Checking / replacing the fuel cut-off solenoid valve
7.7 Adjusting the gas drive
7.8 Checking / adjusting the idle speed
7.9 Removal and installation of injectors
7.10 Removal and installation.

8.0 Exhaust system
8.1 Principle of operation of the catalytic converter (catalyst)
8.2 Rules for the operation of vehicles with a catalyst
8.3 Removal and installation of the exhaust system
8.4 Checking / removing and installing a lambda probe
.

9.0 Clutch
9.1 Removing and installing / checking clutch
9.2 Removing and installing / checking clutch release bearing
9.3 Adjusting the clutch pedal / cable
9.4 Checking / adjusting the clutch pedal
9.5 Bleeding the clutch actuator
.

10.0 Manual transmission
10.1 Removing and installing gearbox
10.2 Gear shift mechanism
10.3 Four-wheel drive
.

11.0 Automatic transmission
11.1 Towing vehicles with automatic transmission
.

12.0 Suspension and steering system
12.2 Removing and installing suspension strut
12.3 Dismantling the shock absorber / removing and installing the shock absorber / coil spring
12.4 Checking the shock absorber
12.5 Removing and installing transverse arm / replacing rubber mount
12.6 Checking / replacing the wishbone / steering knuckle support
12.7 Removing and installing drive shaft
12.8 Removing and installing the intermediate shaft
12.9 Checking / disassembling the drive shaft / replacing oil seals
12.10 Under.

13.0 Braking system
13.1 Technical data of the brake system
13.2 Front brake
13.3 Removing and installing front brake pads
13.4 Checking the thickness / lateral runout of the brake disc
13.5 Removing and installing rear disc brake pads
13.6 Removing and installing brake caliper
13.7 Removing and installing brake disc
13.8 Removing and installing rear brake pads / brake drum
13.9 Removal and installation of the wheel brake cylinder
13.10 Repair of wheel t.

14.0 Wheels and tires, bodywork, car painting, car care
14.2 Disc designations
14.3 Tire designations
14.4 Changing wheels
14.5 Tire care rules
14.6 Wheel balancing
14.7 Snow chains
14.8 Spare wheel
14.9 Tire wear
14.10 Body
14.11 Removing and installing front bumper
14.12 Removing and installing rear bumper
14.13 Removal and installation of the radiator grill
14.14 Removing and installing side moldings
14.15 Removal and installation of the front.

15.0 Electrical system
15.2 Checking the circuit breaker for current flow
15.3 Testing the relay
15.4 Checking the wiper motor
15.5 Checking the direction indicators
15.6 Checking brake lights
15.7 Checking the rear window defroster
15.8 Disconnecting and connecting cable plugs
15.9 Location of fuses
15.10 Replacing fuses
15.11 Removing and installing battery
15.12 Battery check
15.13 Battery discharges by itself
15.14 Charging the baht.

16.0 Heater, lighting system, devices
16.2 Fan motor
16.3 Removal and installation of the heater fan
16.4 Heater control unit
16.5 Adjusting heater drives
16.6 Checking the fan motor / pre-resistors
16.7 Checking the heater switch
16.8 Lighting system
16.9 Lamp table
16.10 Replacing ambient light bulbs
16.11 Headlight
16.12 Removing and installing headlights
16.13 Headlight adjustment
16.14 Removal and installation of rear lights
16.15 Instruments 17.0 Controls and receptions of operation
17.2 Running in
17.3 Keys
17.4 Door locks
17.5 Single (central) locking device (if equipped)
17.6 Protection against pranks of children (if equipped, only on the rear doors)
17.7 Power window (if equipped)
17.8 Rear pivoting windows (on 3-door models)
17.9 Seats
17.10 Adjusting the steering wheel height (if equipped)
17.11 Seat belts (if equipped)
17.12 Tailgate / trunk lid
17.

18.0 Wiring diagrams
18.2 Location of central electric plugs
18.3 Construction of electrical circuits
18.4 Relay location
18.5. 1987 no.
18.6. Model 1991
.

In 1963, a rather ordinary-looking golf-class car was shown to the public, which, however, quickly gained popularity and "founded" a whole family of cars - this was the first generation Mazda 323. When by 1980 the second generation Mazda 323 came out - this car already differed from the front drive, and five years later - in 1985 - the first generation of this model was demonstrated for the first time.

When the fourth generation Mazda 323 came out - it happened in 1989 - the creators of this generation decided to make all modifications a little more individual, and made sure that each car received a rather unusual interior and exterior, while leaving the technical side unchanged. Under the hood of the fourth-generation Mazda 323, engineers have installed an engine capable of delighting owners with a capacity of 185 hp. with a volume of 1.8 liters.

Then the company's specialists began to work on the fifth generation Mazda 323, and this work lasted from 1994 to 1998. It should be noted that the work was quite productive, otherwise it would hardly have been possible to achieve three upgrades of the same model in just four years of production.

For example, the first generation was left with the old control panel, and from August 1995 to October 1996, when the second generation was launched, the Mazda 323 appeared in sales centers with an improved and more adapted center console for modern needs, and with a new emblem, which was made in the form lotus icon.

The period from October 1996 to June 1998 was marked by the release of the latest versions of the fifth generation Mazda 323. This car had more and more differences from the first versions - the emblem decorating the radiator grille, acquired the shape of a flying bird, the shape of the mirrors and the dashboard changed, an additional stop appeared. signal.

At that time, there were three representatives of the fifth generation at once - a 5-door and 3-door hatchbacks and a sedan. The line of gasoline engines included four units, with the weakest of them, which produced only 73 hp. and had a working volume of 1.4 liters, intended only for 3-door hatchbacks and sedans.

The rest of the petrol engines are a 1.5-liter unit with 88 horsepower, a 1.8-liter unit with 114 horsepower and a 2-liter V6 with 144 horsepower. In addition, there were several diesel engines in the engine line - the first with an atmospheric volume of 2 liters and a power of 71 hp, and the second - a 1.7-liter, turbocharged and 82 hp.

Almost all versions of the fifth generation Mazda 323 worked with a 5-speed manual transmission, but there were also such “copies” on which an automatic transmission was installed.

The year 2001 brought the model some changes - the designers worked on the exterior of the car, as a result of which it acquired a more aggressive and expressive appearance.

Engineers also contributed by working on the engine range - the 1.5-liter engine was replaced with a 1.6-liter engine capable of delivering 98 hp. They also got rid of the 1.8-liter engine - instead of it, a 2-liter 131-horsepower engine was installed on the Mazda 323, which was previously used mainly by the 626th model.

We added power to the two-liter turbodiesel - it began to produce 11 more "horses". Only the small 1.3-liter engine remained the same with 72 horsepower.

The Mazda 323 model existed until 2003, when the company's lineup was replenished with a new car with a new name - Mazda 3.

General information about the car.

Cars of these models are available in sedan, hatchback and compact versions with gasoline and diesel engines. The Mazda 323 is powered by a water-cooled, four-cylinder in-line engine located across the direction of travel. To prepare the working mixture, depending on the model, either a carburetor or an electronic fuel injection system is used, which, as a rule, does not require maintenance. The front wheels are driven via a manual gearbox or a 3 or 4-speed automatic transmission. The Mazda 323 is also available in an all-wheel drive version. Additional elements are required to drive the rear wheels. The drive of the front and rear wheels is connected by a cardan shaft. The propeller shaft drives the rear wheel differential, from which two drive shafts extend to the rear wheels. The steering gear is located to the left of the engine and is connected to the steering levers by means of rods. Some models are equipped with power steering. The braking system consists of a brake master cylinder, a brake booster, disc brakes on the front wheels and drum brakes on the rear wheels. Some models also have disc brakes on the rear wheels.

Depending on model Mazda 323 from 10/89 can be equipped with anti-lock braking system (ABS).

1. Mazda-323 automobiles 1.0 Mazda-323 automobiles 1.3 Vehicle identification numbers 1.4 Purchase of spare parts 1.5 Service technology, tools and workplace equipment 1.6 Starting the engine from an auxiliary source 1.7 Jacking and towing 1.8 Automotive chemicals, oils and lubricants 1.9 Troubleshooting 1.10 Routine maintenance 1.11. Maintenance work 1.12 Gearbox / wheel drive 1.13 Brakes / tires / wheels 1.14 Steering / front wheel drive 1.15 Vehicle electrical system 1.16 Body / interior equipment

2.Gasoline engines 2.0 Gasoline engines 2.3 Removal and installation of the engine 2.4 Removal and installation of the toothed belt of engines ВЗ, В5, B6 (SOHC), ВР (SOHC) 2.5 Removal and installation of the timing belt (DOHC) 2.6 Removal and installation of the cylinder head / replacement of the cylinder head gasket 2.7 Chain drive mechanism 2.8 Removing and installing camshaft / camshaft adjustment 2.9 Removing and installing camshaft 2.10 Camshaft / camshaft drive 2.11 Camshaft / camshaft drive 2.12 Removing and installing camshafts 2.13 Removing and installing valves 2.14 Replacing valve stem seals 2.15 Checking guides valves 2.16 Machining valve seat chamfers in the cylinder head / machining valves 2.17 Lapping valves 2.18 Checking / adjusting valve clearance 2.19 Checking compression 2.20 Removing and installing / tensioning the V-belt

3. Engine lubrication system 3.0 Engine lubrication system 3.1 Oil circuit 3.2 Checking the oil pressure 3.3 Checking the oil pressure sensor 3.4 Removing and installing the oil pan

4. Engine cooling system 4.0 Engine cooling system 4.2 Antifreeze concentrate 4.3 Replacing the coolant 4.4 Checking the tightness of the cooling system 4.5 Removing and installing / checking the thermostat 4.6 Removing and installing the water pump 4.7 Removing and installing the radiator 4.8 Removing and installing the fan motor 4.9 Checking the thermal switch

5. Ignition system 5.0 Ignition system 5.1 Safety measures when working with an electronic ignition system 5.2 Checking the ignition coil 5.3 Checking the ignition cable 5.4 Checking / adjusting the ignition timing 5.5 Removing and installing the ignition distributor 5.6 Spark plugs 5.7 Plugs for MAZDA 323

6. Power system, carburetor, fuel injection system 6.0 Power system, carburetor, fuel injection system 6.1 Cleanliness rules when working with the power system 6.2 Removing and installing / checking the sensor in the fuel tank 6.3 Removing and installing the fuel tank 6.4 Removing and installing the fuel pump 6.5 Removal and installation / check of the fuel pump 6.6. Removal and installation of the air filter 6.7. Carburetor 6.8. Fuel injection system

7. Diesel engine 7.0 Diesel engine 7.1 Principle of operation of a diesel engine 7.2 Removal and installation of a toothed belt / adjustment of the timing gear drive 7.3 Preheating system of a diesel engine 7.4 Checking a preheating system 7.5 Bleeding a fuel system 7.6 Checking / replacing a solenoid valve for fuel cut-off 7.7 Adjusting a drive gas 7.8 Checking / adjusting the idle speed 7.9 Removing and installing injectors 7.10 Removing and installing the vacuum pump

8. Exhaust system 8.0 Exhaust system 8.1 Principle of operation of the catalytic converter (catalyst) 8.2 Rules for operating vehicles with a catalyst 8.3 Removing and installing the exhaust system 8.4 Checking / removing and installing a lambda probe

9. Clutch 9.0 Clutch 9.1 Removing and installing / checking the clutch 9.2 Removing and installing / checking the clutch release bearing 9.3 Adjusting the clutch pedal / cable 9.4 Checking / adjusting the clutch pedal 9.5 Bleeding the clutch actuator

10. Manual gearbox 10.0 Manual gearbox 10.1 Removing and installing gearbox 10.2 Gear shifting mechanism 10.3 Four-wheel drive

11. Automatic gearbox 11.0 Automatic gearbox 11.1 Towing vehicles with automatic gearbox

12. Suspension and steering system 12.0 Suspension and steering system 12.2 Removing and installing the shock absorber 12.3 Disassembling the shock absorber / removing and installing the shock absorber / coil spring 12.4 Checking the shock absorber 12.5 Removing and installing the wishbone / replacing the rubber mount 12.6 Checking / replacing the transverse support lever / knuckle 12.7 Removing and installing drive shaft 12.8 Removing and installingintermediate shaft 12.9 Checking / disassembling the drive shaft / replacing oil seals 12.10 Front hub bearing 12.11 Rear suspension 12.12 Removing and installing the rear shock absorber 12.13 Disassembling the rear shock absorber / coil spring 12.14 Cross arms / trailing arm / stabilizer 12.15 Checking the hub bearing 12.16 Removing and installing the hub bearing 12.17 Adjusting the hub bearing play 12.18 Removing and installing the hub 12.19 Steering 12.20 Removing and installing the steering wheel 12.21 Removing and installing the tie rod end 12.22 Removing and installing the rubber cuff of the steering gear 12.23 Servo pump 12.24 Wheel alignment angles 12.25 Values MAZDA 323 checks

13. Brake system 13.0 Brake system 13.1 Technical data of the brake system 13.2 Front brake 13.3 Removing and installing the front brake pads 13.4 Checking the thickness / lateral runout of the brake disc 13.5 Removing and installing the rear disc brake pads 13.6 Removing and installing the brake caliper 13.7 Removing and installing the brake disc 13.8 Removing and installing the rear brake pads / brake drum 13.9 Removing and installing the wheel brake cylinder 13.10 Repairing the wheel brake cylinder 13.11 Brake fluid 13.12 Bleeding the brake system 13.13 Replacing brake lines and hoses 13.14 Checking the brake booster 13.15 Removing and installing the brake light switch 13.16 Hand brake 13.17 Adjusting the handbrake 13.18 Anti-lock braking system (ABS)

15. Electrical system 15.0 Electrical system 15.2 Checking the switch for passing current 15.3 Checking the relay 15.4 Checking the wiper motor 15.5 Checking the direction indicators 15.6 Checking the brake lights 15.7 Checking the rear window heater 15.8 Disconnecting and connecting the cable plugs 15.9 Location of fuses 15.10 Replacing fuses 15.11 Removing and installing 15.12 Battery check 15.13 Battery discharges by itself 15.14 Battery charge 15.15 Battery storage 15.16 Alternator 15.17 Alternator safety precautions 15.18 Alternator voltage check 15.19 Alternator removal and installation 15.20 Alternator components 15.21 Alternator disassembly / replacement of carbon brushes 15.22 Starter removal and installation 15.23 Checking / replacing the starter traction relay

16. Heater, lighting system, devices 16.0 Heater, lighting system, devices 16.2 Fan motor 16.3 Removing and installing the heater fan 16.4 Heater control unit 16.5 Adjusting the heater drives 16.6 Checking the fan motor / pre-resistors 16.7 Checking the heater switch 16.8 Lighting system 16.9 Table of lamps 16.10 Replacement external lighting lamps 16.11 Headlight 16.12 Removing and installing headlights 16.13 Adjusting headlights 16.14 Removing and installing rear lights 16.15 Instruments 16.16 Instrument panel 16.17 Removing and installing an instrument panel 16.18 Instruments 16.19 Removing and installing a radio receiver 16.20 Removing and installing loudspeakers 16.21 Removing and installing a whip antenna 16.22 wiper blades 16.23 Removing and installing / adjusting washer nozzles 16.24 Removing and installing front wiper arms 16.25 Front wiper 16.26 Removing and installing front wiper motor 16.27 Rear wiper 16.28 Removing and installing new rear wiper motor 16.29 Removing and installing rear wiper arm

17. Controls and receptions of operation 17.0 Controls and receptions of operation 17.2 Running in 17.3 Keys 17.4 Door locks 17.5 Single (central) locking device (if any) 17.6 Protection against pranks of children (if available, only on the rear doors) 17.7 Electric window (if available) 17.8 Rear pivot windows (on 3-door models) 17.9 Seats 17.10 Steering wheel height adjustment (if equipped) 17.11 Seat belts (if equipped) 17.12 Tailgate / boot lid 17.13 Refueling 17.14 Mirrors 17.15 Luggage straps 17.16 Trunk lid (if available)17.17 Spare wheel 17.18 Dashboard 17.19 Steering wheel and gear shifting 17.20 Starting the engine 17.21 Controlling the manual transmission and transfer case 17.22 Operating a car with an automatic transmission 17.23 Recommendations for economical operation 17.24 Tempostat (constant speed mode switch) 17.25 Lighting and warning lights 17.26 Windshield wiper and windscreen washer 17.27 Instrument panel 17.28 Other devices and equipment 17.29 Heater and ventilation 17.30 Air conditioning (if equipped) 17.31 Interior, trunk and reading lamps (if equipped) 17.32 Sliding sunroof (if equipped) 17.33 Push or tow start 17.34 Engine compartment

18. Electric diagrams 18.0 Electric diagrams 18.2 Arrangement of plugs for central electrics 18.3 Construction of electric diagrams 18.4 Arrangement of relays 18.5. 1987 no. 18.6. Model 1991

Free Mazda 323 Books & Manuals

Service manual Mazda 323

- Mazda 323 repair in photos - details of the components and assemblies of the car - do-it-yourself elimination of typical Mazda 323 malfunctions

DOWNLOAD / download from mirror

Mazda 323 Owner's Manual and Service Manual

Cars of these models are available in sedan, hatchback and compact versions with gasoline and diesel engines.

The Mazda 323 is powered by a water-cooled, four-cylinder in-line engine located across the direction of travel.

To prepare the working mixture, depending on the model, either a carburetor or an electronic fuel injection system is used, which, as a rule, does not require maintenance.

The front wheels are driven via a manual gearbox or a 3 or 4-speed automatic transmission.

The steering gear is located to the left of the engine and is connected to the steering levers by means of rods. Some models are equipped with power steering.

The braking system consists of a brake master cylinder, a brake booster, disc brakes on the front wheels and drum brakes on the rear wheels. Some models also have disc brakes on the rear wheels.

Depending on model Mazda 323 from 10/89 can be equipped with anti-lock braking system (ABS).

VAZ & nbsp & nbsp GAZ & nbsp & nbsp Daewoo & nbsp & nbsp Renault & nbsp & nbsp IZH & nbsp & nbsp Mazda & nbsp & nbsp Nissan & nbsp & nbsp Opel & nbsp & nbsp Uaz & nbsp & nbsp nbsp nbsp & nbsp Chevy & nbsp & nbsp nbsp & nbsp & nbsp & nbsp & nbsp nbsp & nbsp & nbsp & nbsp & nbsp nbsp & nbsp & nbsp & nbsp & nbsp & nbsp & nbsp Ford & nbsp

The car needs a shock absorber so that the driver does not feel all the pits and bumps in the road on his own fifth point. It is the shock absorber that softens the shocks and returns the wheel to its original place. Sometimes extraneous noises appear in it. Worse if it bursts or cracks. In this case, its replacement is definitely needed.

It is rare that the ignition moment is shifted due to constant mechanical stress. Despite this, the problem of ignition timing exists in the Mazda 323, therefore the manufacturer recommends routine checks of this element. In addition, if the distributor was dismantled, then you will definitely need to check and adjust the ignition timing on the Mazda 3. To check this moment, you need to have two devices - a tachometer and a stroboscope.

Bumpers protect your vehicle from external factors. These factors can be various pebbles, sticks, debris, insects, animals, and sometimes even people. In addition, it is a small impact softener. It also stores the wiring elements of electrical appliances. Sometimes the bumper is changed as needed, sometimes at will, due to small scratches and chips that appear very quickly. So, how does the replacement of bumpers on the Mazda 626 take place?

The carburetor has not been used on new car models for a long time. But, if you have a Mazda 323, then this particular device must be installed on it. It is needed in order to prepare the right mixture for the engine. Time and poor fuel can quickly cause this device to malfunction, so you need to be prepared to replace it.

Clutch problems on the Mazda 3 can be very different - they are jerks, and subsidence, and clamps. In any case, you will need to replace the clutch on the Mazda 3.

Foreign cars are manufactured for road conditions that are close to their country. Since the roads in Japan are flat, the Mazda 626 suffers a lot when it comes to the post-Soviet space. Any suspension can be destroyed with our roads. Even some tanks will be out of order after driving on our highways, not to mention the suburban roads. But now is not about that. The consequence of bad roads is the destruction of car parts.

The heater fan is needed in order to be able to control the intensity of air supply to the car interior. Without this element, air would enter the passenger compartment too slowly, and warming up in the car took not a couple of minutes, but several hours. Depending on the year of manufacture, there are different fans in the Mazda 323.

The steering wheel is needed in order to transfer forces from the hands of a motorist, to the wheels of a car and to perform maneuvers on the road. If a wheel is faulty, then it requires immediate intervention, because it is impossible to drive with such a breakdown and is life-threatening. At any time, the wheels can turn themselves wherever they want.

When replacing brake discs, it is often necessary to bleed the brakes. The same procedure is sometimes done after a long operation of the car, since over time the braking efficiency decreases, no matter how carefully you drive. The main reason for this action is the ingress of air into the brake system. And if the brake hose was disconnected from the caliper for some time due to repair work, then only a certain caliper can be pumped.

The fuel pump is responsible for ensuring that at any given time there is as much gasoline in the engine as the driver desires by pressing the accelerator pedal. If he wants to go fast, then there must be a large amount of fuel, if slowly - a little. It is located on a holder in the fuel tank. Very close to the fuel level sensor. Since gasoline emits toxic substances when it evaporates, dress so that there is no open area left. You only need to work with gloves on. In addition, you should always have a gas mask nearby.

The auto repair category is the largest section on our website, a wide range of instructions for the repair and operation of a car is collected here.

Here we have published the most popular articles in the car tuning section, we recommend that you familiarize yourself.

This section, namely advice to motorists, is filled with super-useful material. We advise you to take a look!

Video (click to play).

Only here you can find answers to your questions regarding problems in the car.

Rate the article:

Grade 3.2 who voted: 85