Do-it-yourself plate does not spin in the microwave

In detail: the dish does not spin in the microwave DIY repair from a real master for the site my.housecope.com.

Microwaves have long and firmly entered our lives. With their help, you can not only quickly warm up or defrost food, but also prepare a simple dish. And it can be very annoying when it stops working. Especially if the damage seems to be insignificant. If the dish in the microwave does not spin but continues to work, what should I do? Can I continue to use it further?

The operation of a microwave oven is based on the conversion of microwave waves generated by the magnetron into thermal energy. The first microwave ovens did not have a rotating tray. And users had to stop the heating process in order to turn the dishes over with the opposite side to the radiator. Later, a rotating plate was developed and implemented. And the process of heating food began to occur evenly from all sides without the participation of the user.

If you do not spin the plate in the microwave, then this will not affect the operation of the microwave oven itself. And in principle, you can use it further. You just have to periodically stop the operation of the microwave and manually unfold the container with food on the other side for even heating.

If you are not seduced by the need to constantly monitor the process of heating food and directly participate in it, then you need to find out the causes of this malfunction and take measures to eliminate it.

All the reasons why the dish stopped rotating in the microwave can be conditionally divided into two categories. The first category includes all the reasons that can be easily eliminated by any person on their own and, in fact, they are not breakdowns. These include the following situations:

Video (click to play).

If you have installed too large dishes in the microwave, which touches the walls of the inner chamber with their walls and slows down the rotation. The solution to the problem will be to replace the dishes with a smaller capacity.
The food container is heavy. Reduce the weight of food you are cooking or reheating.
A piece of food or an accumulation of fatty deposits on moving parts is preventing rotation. It is necessary to mechanically clean the rotating elements.
The pallet is not installed correctly. To resume rotation, you need to install the pallet so that the sleeve fits into the grooves of the plate.

The second category of reasons that led to the stoppage of the rotation of the plate combines technical breakdowns that require repair or replacement of spare parts. And the master must deal with them. These include the following:

The gear of the reducer is defective. Its replacement is required.
The motor shaft coupling has worn out and began to slip. A temporary measure will be to secure it on the shaft. The best solution would be to replace it.
Blown motor winding. The foreman will be able to determine the extent of the repair. It may be enough to change the winding or the motor will need to be replaced.
Short circuit or breakdown of contacts in the power circuit. In this case, it will be necessary to restore the integrity of the circuit.
The engine is out of order.

Backlight bulb burned out. In some models of microwave ovens, the light bulb was included in a serial electrical circuit. And therefore, if it burns out, then the circuit is opened. The solution to the issue is to replace the light bulb.

Engine breakdown is the most serious and costly microwave oven malfunction. And often it involves replacing the motor or one of its elements.Only a qualified technician should repair the engine.

Malfunctions in the engine can result from improper use of the instrument.

When the container with food touches the chamber walls, a large weight of the heated food, manual braking and other moments stopping or slowing down the rotation, the motor shaft of the motor may fail. Replacement part will be required.
Water droplets, food particles and debris can enter the motor housing and gear cover and cause a short circuit in the winding.
Mechanical wear of the gears of the reducer. Plastic gears are installed in modern microwave ovens. On the one hand, this reduces the cost of the device, and on the other hand, it contributes to the rapid wear of parts.
During long-term use of the oven, the contacts may oxidize, move away. In this case, you need to strip the contacts and press them firmly against the power source.

In order for the microwave oven to work for a long time and without interruption, it is necessary to read and follow the instructions for use and care before using it.

Before starting to repair your microwave oven yourself, make sure that the warranty period has expired and you are absolutely sure that you can repair the microwave oven. But remember that not having the necessary knowledge and experience, you can not only not fix the stove, but further aggravate its condition. Unknowingly, you can disable working parts. And this will not only complicate the repair, but also increase its cost.

The right decision would be to contact the professionals of the service center “Polite Service 5 +.” A qualified technician will repair the microwave at home in Moscow. A guarantee is provided for all types of work. We work only with original spare parts.

You can leave a request on our website or by calling 8 (495) 228-42-82.

The microwave does not spin - any owner can face this. We have collected all the diagnostic and repair options in the article.

Microwave ovens of the new generation are a real "first aid" in the kitchen. Cooking, heating and defrosting takes a few minutes. The microwave oven is equipped with a special rotating plate - a tray on which food or ready-made meals are placed. Rotation is necessary for uniform heating: the food is turned by all sides to the source of microwaves - the magnetron.

If the pan is not spinning, cooking will not work as before - the food will only warm up from two sides. You can put up with poor-quality heating for some time, but we can't talk about cooking raw foods.

The easiest way to solve the problem is to contact the service center. And what to do if it is far from him: call a private master or fix the breakdown with your own hands? It all depends on the cause of the malfunction. One and the same breakdown can be caused by completely different prerequisites. In some cases, it is possible to cope with the problem on its own, in the other one cannot do without a specialist.

The first microwave ovens were not equipped with a rotating tray; they came up with it later. The owners of the first expensive ovens cannot be envied - they manually turned the food, the apparatus had to be turned on at least twice. Later, the developers improved the design of the microwave and automated the process - the technique began to work without human intervention.

To ensure that the food warms up evenly, a plate with wheels was introduced into the design. The even rotation allows the food to fully warm up in one cycle.

If the plate stops spinning, you can:

Do nothing and turn by hand. This is a frivolous approach, modern equipment should work according to the declared functions, without taking up the owner's time and without complicating the cooking process.
Find out why the mechanism does not turn the pallet.When the cause of the malfunction is found, take action to eliminate it.

Do not rush to carry the microwave to the service center or call the technician - perhaps the pallet does not rotate due to some non-technical trifle. Then you can fix it yourself.

When examining the device, pay attention to the following points:

The dishes you have placed in the chamber are too large - touching the walls, they interfere with normal rotation. Because of this, the plate with wheels is completely blocked or spins in jerks.
Food has fallen out of the container in the chamber and is blocking movement. Even a crumb trapped between the wheels can cause braking and blocking. Product dimensions can also inhibit rotation. Let's say you put a piece of meat to defrost, but it is too large and, when turning the pallet, touches the walls - the movement becomes intermittent or stops altogether.
You may have misplaced the turntable by cleaning the turntable; if the flanges of the hub or hub are not properly seated in the grooves, there will be no movement. To fix the problem, you just need to put the pallet correctly.

If the microwave oven has been examined and you have not found anything preventing rotation, you will have to look for technical problems. Most likely, the microwave oven will need repair, the degree of complexity of which is again determined by the source of the breakdown.

It is logical to assume that the stop of movement is associated with a malfunction of the twisting mechanism. But the problem can be caused even by such a trifle as a burnt-out internal light bulb - owners of old-generation microwave ovens face this. Look for the malfunctions that led to the stop in the following components and details:

Gear. Broken reducer gear is one of the most common causes of pallet stoppages. Replace it. If it does not help, you will need a serious and expensive repair - replacement of the engine. Considering the cost of such repairs, it is cheaper to dispose of the old device and buy a new one. So you don't have to spend money on repairs, you will get a new, more reliable and functional model from a reliable manufacturer.

Clutch. This coupling mechanism, when slipping on the shaft, can inhibit rotation. Try to strengthen it by eliminating slippage. Did not help? Then you need to change the clutch.
Motor winding. If it is torn, the intervention of the master will be required. The winding cannot be restored; it must be changed. You can also radically solve the problem - change the motor. You can learn about damage to the winding without disassembling the equipment - there is a smell of burnt varnish.
Supply chain. To check the continuity of the power circuit, ring the wiring with a tester. Found an open circuit? You just need to eliminate it.

In some versions of the microwave, the internal illumination lamp is included in a series circuit. If the lamp burns out, the circuit is interrupted and the motor turns off. The decision is ill-considered, but hardly any of the buyers, when choosing a microwave oven, delves into such nuances - they will find out about this when it breaks down.

In such models, you just need to replace the burned out lamp, and the problem will be eliminated.

The most unpleasant reason why the saucer does not spin is a broken engine. As mentioned above, replacing an engine is an expensive pleasure, which not every owner of a microwave oven can decide on. You must first calculate the rationality of such a step. Often the malfunction is associated with a breakdown of the gearbox or poor-quality wiring. In any situation, you need to replace the motor.

To understand the causes of the malfunction, you need to know the design of the engine. Let's take a closer look at the mechanisms that affect the operation of the motor:

Motor shaft. With its help, a rotational movement is produced. Shaft breakage can be caused by careless handling or tampering, for example:

manual braking;
touching the walls of the chamber with the dishes;
increased load on the mechanism.

Important! Having bought a microwave oven, be sure to read the instructions in order to know how to use it correctly, what loads it can withstand.

Motor housing and gear cover. Their task is to prevent water, food particles and foreign objects from getting inside the microwave.

Reducer. Responsible for the functioning of the rotating element. Gearbox breakage is rare - this is a fairly wear-resistant mechanism. When the gears participating in the rotation are worn out, it breaks.

Attention! Today, in microwave ovens, plastic analogs are used instead of metal gears, which does not contribute to the durability of the gearbox.

To find out the reasons for the breakdown, you need to disassemble the device. First, remove the panel covering the engine. Then it is removed and untwisted with a screwdriver and pliers. Fat often accumulates under the lid - it must be carefully removed without damaging the mechanism. You can use regular alcohol or a special composition. When the grease is removed, it is necessary to lubricate the important parts of the motor and fix the housing.

In order for the motor to work fully, it must have low revs and high torque. It also requires high efficiency and energy efficiency. In microwaves, synchronous motors of low power (4 W) are used, making 3-7 revolutions per minute. They easily turn the plate on which several kilograms are placed.

You don't need any special talents to replace a broken motor or gearbox - follow the appropriate video instructions:

When replacing the engine do not turn the shaft if you touch the power terminals - you can break the gearbox or get you electrocuted... When choosing how to replace a broken part, do not take cheap analogs - they are of poor quality and are unlikely to last long.

Read also: Vesper DIY repair

If you find that the plate is broken and the microwave is not heating, it is likely that it is simply not receiving power. It is possible that the wires in the motor are burnt out or the microcircuits are damaged. This problem often occurs in homes where voltage is unstable.

In addition, the failure of the batteries can provoke water that gets inside the case - you will need to deal with the internal block of the stove. Without sufficient electrical knowledge and skills, you should not fix such problems yourself. If you don't want to break anything else, entrust the work to qualified specialists.

Depending on the cause of the malfunction and the cost of the repair, you will decide whether to repair or dispose of.

If you are going to interfere with the "insides" of the microwave oven, remember that service centers do not like this. If your equipment is under warranty, it is better to give it to specialists right away. As soon as you open the case, the warranty service will be denied.

If the warranty goes out, then you can try to fix the problem yourself. If it doesn't work out, go to the masters. They have everything you need for diagnostics and repairs.

A microwave is a sophisticated household appliance, a product of innovative technologies. It is all the more offensive when you lose it because of such a trifle as a spinning plate. It turns out that this problem can be avoided in advance if you buy a machine without a rotating mechanism.

An inverter oven is the most advanced microwave oven. Its main difference is inverter regulation by a magnetron. One of the advantages of such microwave ovens is the absence of a turntable:

No moving parts - less breakage.
The magnetron is located at the bottom, not at the side - the volume is used more efficiently. The capacity of the chamber is increased. Cooking and defrosting are speeded up.
Maintenance is simplified and reliability is increased.
You can cook several dishes at the same time in different dishes.

On a note! You will learn more about this technique in the review "Microwave without turntable".

Before deciding on an independent microwave oven repair, evaluate your capabilities. It is definitely not worth disassembling a device that is under warranty. Before contacting a service or a specialist, be sure to check if there are any obstacles that impede the rotation of the pallet. When troubleshooting, be careful not to make the problem worse.

Check out useful videos to help you fix the breakdown yourself:

Microwaves have firmly taken their place in modern kitchens, almost impossible to do without them: they reheat, defrost and even prepare dishes. Therefore, in case of problems, we immediately try to fix them. Often a tray or plate does not spin in the microwave, although it itself works and heats up. Why this happens and why the microwave does not spin - we will understand this.

There may be several situations of failure in the operation of the pallet of microwave ovens:

Mechanical obstacles to movement due to accumulated fat or food debris on moving parts.

Incorrect installation of pallet and rotation rail.

The weight of the dish with the food is too heavy.

Engine malfunctions, namely:

breakage of the gears of the reducer;
short circuit of the winding or poor quality contacts;
turning the shaft.

Depending on the reasons, there is a need to repair or replace parts if the plate does not rotate in the microwave.

Food will be heated on one side only without scrolling.

Problems with pallet movement do not always lead to a trip to a service center and equipment repair. Sometimes you can fix the malfunction with your own hands, it is enough to accurately determine the cause of its occurrence.

If the problem is not serious, then the problem can be fixed by yourself.

Instructions with a detailed description of all possible causes and ways to fix problems yourself:

In old-style microwaves, the power supply circuit is poorly thought out: if one element of the circuit breaks down, then everything stops working.

If you observe not only the lack of rotation of the plate, but also a burnt out light source, then ...

Solution: replace the light bulb.

Sometimes food particles stick to casters, rails, or the glass plate itself is not properly installed.

In this case, it spins in jerks or refuses to rotate at all, and the process itself is accompanied by a dull hum.

To fix the situation, you need to check:

whether there is frozen fat or pieces of food on moving elements (wheels, rails, shaft, plate grooves);
the glass plate is installed correctly;
whether the casters are properly installed on the rails.

Solution: find what interferes with work and eliminate.

Solution: put the plate, rails or wheels in the correct position.

If all of the above is properly installed in the microwave, there is no debris and no visible problems are found, then the problem may be in the engine malfunction. The following mechanisms can break down in it:

gears of the reducer;
twisting shaft;
short circuit and breakage of the winding.

One of these breakdowns may be the reason why the microwave heats up - but the pan does not spin. You can replace the engine itself or one of its elements yourself, but only if you are confident in your knowledge and skills.

The table below describes in detail the possible causes of engine malfunction and how to solve them:

Earlier, gears made of metal were inserted into the motors of microwave ovens, now they are replaced with plastic ones that are less durable, but cheaper counterparts.

These gears wear off and the teeth break off over time.

remove the back cover of the microwave;
pull out the engine;
unscrew the gearbox fasteners and see the condition of the gears;
replace gears with new ones;
screw the gearbox into place, put the engine;
screw on the lid.

The shaft is exactly the part on which the plate rotates in the microwave.

The shaft breaks if the plate with the product is too heavy, the edges of the meat, for example, touch the walls and mechanically slow down the work.

Or just someone careless wanted to hold the plate while spinning.

Solution: disassemble the engine and replace parts.

In this case, it is very problematic to independently determine the problem, but if there is an ohmmeter, then you can detect the malfunction yourself.

Solution: It is not recommended to repair a microwave oven without a lack of knowledge in an electrician.

During operation, the contacts (in the photo they are golden) going to the engine eventually move away, from which it may stop working.

de-energize the device;
remove the back cover;
press the contacts close to the power source;
reassemble the device.

Check the warranty period in your oven documentation. If it has not yet expired, then it is better to refer the microwave to specialists who will fix the breakdown free of charge under the warranty card.

Attempts to repair the microwave on their own make it impossible to give it to specialists for warranty repair. Any intervention and breaking of the seals is a non-warranty case, and if you failed to fix the malfunction yourself, you will have to contact the service center, but for money. In this case, the repair price may exceed 70% of the cost of new equipment.

The reason that the pallet stopped spinning in the microwave can be several: from commonplace pollution to serious problems with the engine. It is up to you to fix it yourself or not. And if in some cases you can get by with a screwdriver and a rag, then in others it is imperative to take the microwave oven to the workshop for warranty repair.

The video in this article clearly demonstrates the internal structure of the microwave motor and talks about possible problems and ways to solve them. And if you have any questions - I will answer them in the comments, ask!

The rotating pan in the microwave ensures even heating and cooking of food. By rotating the microwaves, all parts of the dish will be heated equally, this is especially important, for example, for even defrosting food. Below we will take a closer look at the reasons why the dish does not spin in the microwave and what to do in such cases.

If the dish stops rotating in the microwave, the dish may be too large or a piece of food that is too large. They can come into contact with the side walls or the door of the stove, thereby preventing the platform from rotating. In some cases, due to the rotation, the food or plate can be displaced from the center diagonally, as a result, resting against the wall and preventing the pan from moving. In this case, it will be enough just to fix the heated dish, cut a large piece into several parts, and replace a large container / plate with a smaller one.

The operating instructions always indicate the maximum weight of the food that can be reheated. If the permissible weight is exceeded, the microwave oven can function normally, but the engine will operate at maximum power, which leads to accelerated wear and tear and rapid failure.

Another reason why the dish does not rotate is if it is not correctly installed on the bushing. On the back there are tabs that fit into the bushing. If there is no clutch, the engine can turn, but torque will not be transmitted to the plate and it will remain stationary. It will be enough just to move the pallet slightly in rotation or diagonally so that it "sits" in its place.

To improve rotation, a plastic roller is installed under the plate, which ensures smooth movement. Sometimes the reason the cymbal stops spinning is because of the plastic wheels. They can get food debris or crumbs, which will jam the wheels, preventing them from spinning.Then it will be enough just to wash and clean the roller. Over time, the plastic casters wear out, so the roller can be replaced with a new one.

If the saucer still won't spin, there is a problem with the engine or no power.

In some models of microwave ovens (first of all, the old model), a burned-out light bulb can cause the tray to stop rotating. It's all about the design features, if the light bulb is included in series in a common electrical circuit. As a result, its burnout leads to an open circuit, and electricity ceases to flow to the engine. Replacing the lamp fixes the problem.

Most modern microwave ovens are equipped with E-14 type electric lamps with a power of 20 watts. Replacing them is quite simple, the process itself is described in detail in the instruction manual.

All work on replacing parts, checking the health of the internal wiring and the engine must be carried out after disconnecting the microwave oven from power!

Poor contact is one of the common causes of home appliance failures. Having removed the microwave cover, we carefully examine whether all the wires are connected. We pay special attention to the terminals of the electric motor. If they show signs of burning or corrosion, they must be disconnected, cleaned, reconnected and pressed well with pliers. Possibly due to poor contact, which caused the resistance to rise, the engine could not run at full power.

If visually all contacts are in order, then a possible cause of failure is a malfunction in the control unit. Most often, in this case, some other functions may not work, and the oven itself is unstable. The main reason for the failure of the control unit is instability and voltage drops, which can be caused by fluctuations and surges in the current in the network. In addition, some elements could be damaged due to water / moisture ingress if the microwave oven was not properly serviced.

If, after all the above operations, the breakdown has not been eliminated, the malfunction is most likely associated with the operation of the engine. If the microwave oven is still under warranty, then you should not repair it yourself, but take it to a service center. Broken seals will cause a refusal to eliminate the malfunction free of charge, as provided by the service guarantees.

Motor failure is the most common reason a dish stops rotating in a microwave oven. In this case, there may be several options:

A gearbox is a set of gears that transmit torque from the motor directly to the plate. In older models, the gears were made of metal, so the likelihood of their breakage was minimal. In more modern models, the metal was replaced with plastic, so the probability of failure of the gearbox has increased dramatically - the teeth (especially under heavy load) wear out and wear out.
motor shaft - transfers the force from the gearbox to the rotating platform. Usually it is made of plastic, if the plate is loaded above the specified rate, then it can simply break.
Motor breakdowns - most often, they are caused by a short circuit of the motor winding due to the ingress of water or pieces of food. When the winding is closed, the motor begins to heat up strongly, one of the main signs of burnt wiring is a sharp characteristic smell of burnt wiring. The exact nature of the malfunction can only be determined using an ohmmeter. If the value of the measured resistance is very large or even goes to "infinity", then this is clearly associated with a broken wiring.

Read also: DIY Philips shaver repair

Elimination of faults related to the gearbox or motor is associated with the complete replacement of these elements. In principle, if you have basic knowledge in electronics, their replacement will not be a problem.New parts can be ordered online or in a store and then, using the prompts on the video, you can install them yourself.

Otherwise, it is better to use the services of a customer service. At the same time, self-determination of the reason why the pallet stopped rotating will help to avoid deception by the repairmen. In some services, they always "determine" the most expensive breakdown in terms of repair costs, although in reality the work can cost significantly less.

Technique tends to break down. More often than not, the breakdown appears to be minor. For example, the microwave works, but the plate does not spin or the food is not heated. What to do if the cymbal stops rotating? The problem can go much deeper. Let's analyze the possible causes of the breakdown and how to eliminate them.If the plate has stopped rotating, then most likely the torque element itself is faulty. In order to verify this, check if the platform itself is installed correctly. Another reason that can be easily and quickly eliminated is burned out light bulb inside the chamber. This problem is faced mainly by users of old models of microwave ovens. Image - The plate does not spin in the microwave; DIY repair

The following problems are also encountered:

engine damage;
malfunction in the gearbox;
poor quality of wires, contacts or microcircuits.

A more complex breakdown, in which the microwave plate may stop spinning, is an engine malfunction. Often, violations are associated with the operation of the gearbox and the quality of the wires. If the cause of the breakdown lies precisely in this, then the engine will have to be changed in any case.

Rotary table motor device

In order to understand what kind of malfunction needs to be eliminated, take a look at the device of the engine itself. Malfunction of mechanisms also affects the operation of the motor:

The rotation of the plate is carried out by means of a motor shaft. Problems in the operation of this part arise from careless handling of the microwave. External interference with the operation of the rotary element, such as manual braking, the plate hitting the microwave oven walls, or a strong load on the mechanism can damage the device.

After purchasing a microwave oven, be sure to read the instructions on how to use it correctly. Pay particular attention to what kind of overload it can withstand.

Protection from moisture, food particles or other foreign objects into the internal environment of the microwave is provided by the gear cover and the motor housing.

A gearbox is the part that performs the work of a rotating element. Its breakdown is much less common than the rest, because it is due to the wear resistance of the mechanism. If you use a microwave oven for quite a long time, then in case of failure of the plate, you should pay attention to the serviceability of the gearbox. The metal gears that rotate will wear out over time.

Note! In modern models, plastic gears are installed, which can also affect premature engine failure.

Microwave problems can be caused by a power outage. Such a malfunction occurs when wires burn out in the motor or microcircuits are damaged. Basically, this problem is faced by those users in whose homes frequent power surges are possible. Also, the reasons for the failure of the batteries can be water or detergents that got inside. The solution to the problem lies in the inner block of the microwave oven.

Be careful: if you do not have knowledge of electronics, then it is better to contact a specialist who will provide you with qualified assistance. Unauthorized intervention may adversely affect the continued use of the device.Now let's move on to the replacement itself.The process of replacing an engine or gearbox is quite simple, anyone can do it, just follow the video instructions.

Note! When replacing the motor, do not turn the rotary shaft while holding the motor or touching the power terminal. Doing so could damage the gearbox or give you an electric shock.

note on the price of the mechanism... You should not buy cheap parts, their quality will limit the service life of the device and can soon provoke a breakdown again.

A microwave oven is a rather complicated mechanism, so if the plate is not spinning in your microwave, it is worth contacting a specialist. Personal intervention may affect the further use of the device or lead to complete failure of the working elements. However, if you have knowledge in the field of electrical engineering, you can try to repair the oven with your own hands.

Most people have a microwave oven, and it makes heating food a lot easier. The pallet is a fragile device, due to which uniform heating is ensured - the container with food rotates, warming up with microwaves. A plate malfunction does not always attract attention, because the microwave oven continues to work. However, there are several causes of breakage and repair methods.

Pan rotation is a modern improvement that allows you to reheat food in one go. Previously, people had to turn the dish on their own, turning on the oven several times. One cycle allows you to evenly reheat food by rotating the plate.

Pallet malfunction is not the most difficult problem with a microwave oven. The first step is to find out the reason, this will allow you to decide on the method of repair - do it yourself or give it to the service department.

There are not so many reasons for plate breakage, most of them can be checked and corrected with your own hands.

The lamp for lighting the inner chamber and the motor located in the pallet, on some models, work on a daisy chain. In other words, if a light bulb breaks, the pallet stops working... However, the solution here is the simplest - it is enough to replace the lighting element.

The motor is hidden under a special part - a coupler. It is made of plastic and serves as a support for the inner plate and protects the engine. Traditionally it has three branches on which the pallet is located. Sometimes a piece of food that falls out of the plate when turning can get stuck and prevent the coupler from turning. It will be enough just to remove the foreign object.

The pallet is not installed correctly, the wheels have shifted after regular cleaning or too much food. It is necessary to fix the plate.

A common problem when one of the mechanisms fails. A bent or broken gear often stops the cymbal from turning.

A very unpleasant factor when this part fails - replacement will be expensive, it is easier to purchase new equipment. It is the shaft that is responsible for the movement of the pallet.... Often times, the malfunction can be wiring and cause damage to the gearbox. But most often the shaft breaks due to the total weight delivered to the microwave oven of the dish.

Important! When purchasing a microwave oven, be sure to read the user manual. And take into account, with further use, what kind of load it can withstand.

Closing the winding is unpleasant, but instantly recognizable: the smell of burnt varnish will appear in the inner chamber. A break following a short will cause the motor to stall.

Quite a simple malfunction that can be solved by hand. Loose contacts are usually visible with the naked eye, only for this you need to completely disassemble the oven.

Most of the causes can be corrected by yourself, especially if repairs do not require disassembling the entire microwave oven. The lack of rotation of the dish in a working microwave oven is a malfunction of the rotating element.

In general, the following problems are encountered:

damage to the engine (motor that provides rotation);
gearbox malfunction;
loose contacts and wires.

It is possible to fix the last two problems with the proper skills, but if the problem lies in the engine, then it is better to give the microwave to a service. Free diagnostics will allow you to at least establish the cause of the breakdown, and after that you can try to fix it yourself. But it is better to entrust the matter to specialists: if the breakdown is not serious, then the matter will not take much time.

The first step is to pay attention to the obvious problems. Raise the pallet, having determined the reliability of its fixation in place and the serviceability of the coupler with wheels... If there are dried pieces of food or other foreign objects, then they must be removed. And you also need to clean and wash the space under and around the pallet - it is quite possible that grease and dirt have accumulated on the element and do not allow the plate to rotate.

An oversized dish or food on display brushing against the walls of the inner chamber will become a problem. Try replacing the container or dividing the food. Otherwise, not only the pallet will fail, but the reflective enamel of the inner chamber may also chip off.

The above problems have been eliminated, the pallet is properly installed and the surface is clean, then the malfunction is clearly technical. Breakdowns can be as follows:

the gears of the reducer are bent;
the torque shaft is out of order;
shorted or cut off the motor winding;
contacts have moved away;
burned out microcircuits.

All malfunctions as a result are reduced to a broken engine.... The part is very expensive, since a complete replacement is required. It makes sense to take the microwave to the technical center. A microwave oven master may well replace the engine with a used one, or subordinate the motor.

Important! It is not recommended to repair a broken engine yourself. The malfunction can be repaired, but such a repair will entail more serious problems and, most likely, the need for a complete replacement of equipment.

It is better to leave serious problems to the discretion of the masters in the service center. But three problems can definitely be solved at home without calling a repairman. All of them are simple manipulations:

Burnt out light bulb... As already described, in some models, the motor and the light bulb work on the same line, and the failure of the lighting fixture entails an inoperative pallet. It is enough to buy and replace a light bulb.
Foreign body interferes - often these are dried pieces of food, dried fat and dirt, or another element that accidentally got into the microwave. For example, something could catch on the bottom of the dish, and when it rotated, it would fall off and roll under the tray. It is necessary to clean the inner chamber, paying attention to the underside and wash it off of grease.
Incorrect pallet installation - everything is very simple. It is necessary to fix the plate in the correct position, and check the operation of the oven again.

Important! Before carrying out any measures, it is necessary to de-energize the equipment - disconnect it from the network.

If the microwave stops working, including the rotation of the pan, there is no need to panic. You should try to fix possible problems, and also check the warranty period - it is quite possible that it will be possible to subordinate under warranty. If the breakdown is caused by a failed motor, a torn winding or loose contacts, contacting the service is mandatory.

Video (click to play).

Attempts to repair yourself can aggravate the problem, or only temporarily fix it. It is best to take the microwave oven to a service. The cost of repairs rarely exceeds the cost of a microwave oven, only if the main unit is out of order.

Rate the article:

Grade 3.2 who voted: 85