Details: nissan laptop do-it-yourself bumper repair from a real master for the site my.housecope.com.
Nissan came to us - a blow to the front left corner with a jammed bumper. The bumper was removed to relieve stress and stop the formation of microcracks and plastic fractures in the impact zone.
When removing, we found grain on the bumper absorber and a dried sparrow))) This circumstance made us very happy!
Work on the plastic: the cracks and fasteners of the bumper plastic were soldered, the dents were warmed up and leveled and the general shape of the bumper was restored.
Then we removed the gratings and linings that interfered with painting, once they sanded all the repair zones down to the "bare" plastic on an eccentric machine to exclude the appearance of microcracks and subsidence.
The soldering zones and the necessary places were putty with putty on the plastic, the planes were removed, they were primed with a primer and acrylic primer.
Then everything is finely ground with a developing powder and an eccentric grinding machine for painting. We painted ourselves, assembled the bumper, glued the pads in place and installed the bumper in place.
Video Nissan Note bumper soldering channel painting Evgeny Nividnichy
Mountain coati
Group: Users
Posts: 23
Registration: 12/29/2008
Barbados raccoon
Group: Users
Posts: 267
Registration: 17.4.2008
From: G. Moscow, ZAO, Mozhaisky
Cat squirrel
Group: Users
Posts: 133
Registration: 12.12.2007
From: Moscow, SVAO
Mountain coati
Group: Users
Posts: 23
Registration: 12/29/2008
Raccoon
Group: Moderators
Posts: 4,033
Registration: 17.6.2008
From: Peter
Mountain coati
Group: Users
Posts: 23
Registration: 12/29/2008
Raccoon
Group: Moderators
Posts: 4,033
Registration: 17.6.2008
From: Peter
Video (click to play). |
Cat squirrel
Group: Users
Posts: 135
Registration: 18.9.2008
From: Moscow, Zelenograd
Cat squirrel
Group: Users
Posts: 170
Registration: 16.10.2008
From: Moscow
I was touched in the parking lot, the bumper was painted, the mount was changed for Casco
Post has been edited Ghost_Alex – 14.8.2011, 19:50
a guest
Group: Users
Posts: 3
Registration: 24.9.2007
Raccoon-nosed
Group: Users
Posts: 510
Registration date: 6.8.2008
From: N. Novgorod
Barbados raccoon
Group: Users
Posts: 374
Registration: 1.11.2007
From: Zelenograd
Raccoon-nosed
Group: Users
Posts: 510
Registration date: 6.8.2008
From: N. Novgorod
Barbados raccoon
Group: Users
Posts: 309
Registration: 10.8.2009
From: Chelyabinsk
The bumper must be removed unambiguously, to see if the absorber is alive and to check the panel, it bends very easily, cracks form in the sealant, because during washing or rain, water will run under your spare tire.
My panel was bent 2 times, but both times I straightened it, smeared it with sealant. The paint after the accident is normal, so I did not want to install a new panel, since they will not be delivered at the factory anyway, and where the thread will not be painted over and will rust, in short, I processed and straightened everything with a sealant.
The absorber is inexpensive if anything, about 600 rubles
Post has been edited ekrushin – 12.6.2010, 7:58
- Like
- I do not like
I would like to contact the owners of Nissan Note. my front bumper has peeled off the varnish. I heard that it does not slide apart from the paint, that is, is it a factory defect? Did anyone have such a thing?
- Like
- I do not like
in theory, you need to contact the dealer
yes it happens on these models. some call it a disease, but I think it's a bad game. contact the service - under warranty you should solve the problem
- Like
- I do not like
in the service they can turn it down to the fact that you are using some kind of incomprehensible chemistry, a friend had problems, the service refused
- Like
- I do not like
in the service they can turn it down to the fact that you are using some kind of incomprehensible chemistry, a friend had problems, the service refused
But if there is a paint defect, then it is not in one place.I think you can prove your case, but here you have to try
- Like
- I do not like
Unambiguously to the dealer and preferably not yourself, but with an expert. Will help you defend your point of view.
Doctor Bumper - fast and inexpensive Nissan Note bumper repair in St. Petersburg. We have been professionally repairing and painting Nissan Note plastic bumpers for over 10 years. We have great prices and a 2 year warranty! Our stations are located in every district of the city.
Execute Repairing the plastic bumper of the Nissan Note cannot be pardoned to buy a new one?
Let everyone put the missing comma in the right place, but here's what the vast experience of our customers says (and we have repaired several thousand bumpers already):
- The cost of repairing and painting a plastic bumper is several times lower than the cost of a new one.
- Bumper repairs take hours, while waiting for a new factory bumper can take weeks.
- The physical condition of the refurbished bumper is identical to the new one.
- Native refurbished bumper Nissan Note will fit into place like a glove: without distortions and gaps. The new one will require fitting in place.
Why can't repairing a damaged bumper be postponed?
The bumper is not only the final element of the exterior of the car, but, above all, it is an element of passive safety, a damper that softens the damage to the body in an accident. Only a functional bumper performs this function.
Damage to your car's bumper distracts other road users and attracts traffic police officers.
- repair of scratches, scuffs, chips of rear, front bumpers;
- repair of cracks, dents and breaks in the bumper of any complexity;
- restoration of the lost plastic fragments of the bumper, fastening lugs;
- painting of a plastic bumper: local or complete painting of a bumper;
- welding of cracked bumpers;
- painting the front bumper;
- rear bumper painting.
- - Cash.
- - Credit cards (there is a terminal).
- - Cashless payments for organizations.
We are confident in the quality of the repair: experienced locksmiths and painters will quickly return your car to its original appearance. The warranty period for work is 12 months. And the best evidence of the quality of the repair is the reviews and recommendations of motorists. We are recommended to friends!
- LocalFarbe's unique repair and paint technology allows you to quickly repair localized bumper damage. Local painting without dismantling.
- Plastic welding, PlastiFix technology.
- The selection of paint color is as accurate as possible in accordance with the basic factory setting: without color borders and transitions.
- Impeccable quality and reasonable market average price.
- 12 months extended warranty.
By entrusting us with the repair, painting of a part of the bumper, you will receive a whole native bumper. Will stand, like a glove, without gaps and color transitions!
"Doctor bumper": an old friend (native bumper) is better than two new ones!
Barbados raccoon
Group: Users
Posts: 309
Registration: 10.8.2009
From: Chelyabinsk
Maybe someone will tell you how to do it correctly, but I did this 4 times:
1. Remove the front wheels
2. you pull out all the clips under the hood and below, where the plastic bumper is attached.
3. The most haemorrhoid to remove the decorative grille with the Nissan logo, it is necessary to remove it, because under it a couple of clips hold the bumper, of course the construction of AHTUNG. The most important thing is not to rush, from the bottom of the grill there are latches that enter the slots in the bumper, they need to be carefully lifted to the top, there will be a lot of MATA, get ready.
(after the second removal, I broke off to hell with these latches, without them the grille holds perfectly)
4.remove the clips with which the locker is attached, it is more convenient to release the locker as much as possible, so it will be more convenient
5.Unscrew the screws from the bottom, which attach the lockers to the bumper
6. Unfold the lockers and look for 1 bolt on each side, which secures the bumper to the body, unscrew it.
everything, in principle, nothing else holds.Carefully remove the bumper from the latches that are located at the junction with the wing, well, and then you need to cordon off the pump hoses and fog wires.
By the way, if you break the clips, don't buy relatives, I bought cheap ones from nine, they hold much tighter
Post has been edited ekrushin – 26.5.2010, 8:15
Nissan came to us - a blow to the front left corner with a jammed bumper. The bumper was removed to relieve stress and stop the formation of microcracks and plastic fractures in the impact zone.
When removing, we found grain on the bumper absorber and a dried sparrow))) This circumstance made us very happy!
Work on the plastic: the cracks and fasteners of the bumper plastic were soldered, the dents were warmed up and leveled and the general shape of the bumper was restored.
Then we removed the gratings and linings that interfered with painting, once they sanded all the repair zones down to the "bare" plastic on an eccentric machine to exclude the appearance of microcracks and subsidence.
The soldering zones and the necessary places were putty with putty on the plastic, the planes were removed, they were primed with a primer and acrylic primer.
Then everything is finely ground with a developing powder and an eccentric grinding machine for painting. We painted ourselves, assembled the bumper, glued the pads in place and installed the bumper in place.
and what does it mean “at reasonable prices”? as far as I noticed, it almost coincides with>
but their directory is different, due to which you can better explore the desired area.
took the car from the service.
doraga.
atlichny service from Arnex (he took the headlight),
after it the prices are on the eksist - as if everything is delivered by Aeroflot.
Well, at Arnex, the order was completed in 12 hours.
in the service, the "Japanese" wing was praised - they said that when replacing it at EuroNout they cut off some kind of pocket, then stick it to the wing.
the bumper was barely installed, on EuroNute it is “cut” into 3 parts, in Japanese it is a one-piece piece, attached to 2 clips (according to servicemen).
eurofara already with a corrector (which I have nowhere to connect) - LIGHTS BRIGHT! the truth is now on my left “mirrored” and on the right “in body color”, matte.
in general, apparently in case of an accident, it is necessary to immediately decide whether the car after repair is needed “like new” or not necessarily. in the second case, the repair will be 2-3 times cheaper.
the new bumper and its painting cost 20t.r.
I was surprised at the “laziness” of the servicemen - the “replacement” wing was not even discussed. and 20 years ago, and not so straightened.
_________________
Nissan Note Japan / 1,5CVT / grade 15S / III-2005
Nissan Note bumper repair is done in case of minor damage to the bumper. Repairing the Nissan Note bumper in the absence of large pieces, more than 10 cm, is almost impossible to do, only if you do not find a "donor" from which you can cut the same piece. This is especially true for damaged areas of the bumper where there are bends and transitions.
After repairing the front or rear bumper of Nissan Note, we will paint the bumper and install it on the car. Sometimes, the cost of repairing a Nissan Note bumper can be more expensive than buying a new aftermarket bumper. If we have in stock a used original bumper with less damage, then we can take your bumper into credit, repair ours and install it on the car. Bumpers that go without painting will most likely have to be painted. the place of repair will be noticeable.
The cost of repairing a bumper on a Nissan Note:
Bumper repair terms:
- repair of small chips and polishing takes from 1 to 3 hours;
- repairing cracks and a split bumper can take up to 6-8 hours + time for painting and installation
When to repair a Nissan Note bumper:
- the bumper comes only in the original, and its cost and time are enormous;
- there are minor damages on the bumper and the car needs to be prepared for sale;
- the cost of repairing a bumper is lower than buying a new one.
Nissan Note Bumper Repair Warranty - 6 months
I rummaged through a bunch of information on the Internet for repairing bumpers, they repair it in different ways, someone fuses a metal mesh with a soldering iron,
someone drills holes and sews, someone uses glue. I personally liked the bumper welding method,
an example process is here on video d = 39 & Itemid = 89.
For the welding process, a building hair dryer with at least 2 speeds is required, I had this
https://my.housecope.com/wp-content/uploads/ext/1091/get/5014/. _a94bbf7d_XXXL (welding is carried out at low 1st speed),
Need a hairdryer nozzle https://my.housecope.com/wp-content/uploads/ext/1091/get/5309/. 9_9fd6bcc_XXXL,
I bought it in merlin, so that the nozzle would fit on my hairdryer, I made longitudinal cuts in it.
Hair dryer with nozzle https://my.housecope.com/wp-content/uploads/ext/1091/get/4519/. _966302ff_XXXL.
Also, with something else, it is necessary to slightly “expand” the seams before welding (by 2 millimeters, under the cone), for a good heating of the weld,
for example with such a tool
https://my.housecope.com/wp-content/uploads/ext/1091/get/5812/. _5c38ca82_XXXL
https://my.housecope.com/wp-content/uploads/ext/1091/get/5812/. _52fe0545_XXXL
The bumper itself is made of polypropylene (PP) with additives https://my.housecope.com/wp-content/uploads/ext/1091/get/5814/. _c9f720b8_XXXL
For welding, you also need polypropylene (ABS plastic will not work, ABS and PP plastics are not compatible, one does not stick to the other)
As a material for welding, I used an old part https://my.housecope.com/wp-content/uploads/ext/1091/get/5014/. _ae007071_XXXL
I cut these rods here https://my.housecope.com/wp-content/uploads/ext/1091/get/4914/. _cfcab843_XXXL, square section 3.4 mm.
You can use any old PP bumper (for example from a Zhiguli).
Using a hairdryer, I went along the seam, fusing the "bar" through and through
https://my.housecope.com/wp-content/uploads/ext/1091/get/5308/. _1b8f55ee_XXXL
https://my.housecope.com/wp-content/uploads/ext/1091/get/5309/. _dc3dda8d_XXXL
On the reverse side, PP strips can be additionally fused.
The result is such a welded part.
https://my.housecope.com/wp-content/uploads/ext/1091/get/5813/. _353a8d46_XXXL (already cleaned with a knife)
And you can paint from a spray can (they will pick up paint on the gas tank flap in any car market and pour it into a spray can, plus you also need varnish, also in a spray can, ready-made for sale).
Or a professional painting of a piece of a bumper costs 3.4 thousand rubles.
Auto - Nissan Note - Remove bumper Nissan Note
When the car in front turned on the right turn, pressed to the side of the road and braked, be prepared for the fact that the left door will open at the moment, and the driver or passenger of this car will "fall out" under the wheels for you.
Moving along the highway and seeing the bridge ahead, reduce the speed, because there will certainly be holes in front of him and right behind him, exceptions to this rule are uniqueness for Russian roads.
To park in a narrow place, so that it is fast and beautiful, you need to reverse. The fact is that the "face" of your car, so that it does not protrude, can be turned to the right or to the left. Unscrew the wheels all the way, move back a little, and you will see that the “face” began to move, ie. "hide". And with the "booty" it will not work, so immediately hide it in place, ie park in reverse.
-
Alfa romeo
-
Audi
-
Audi A8
-
Audi 100
-
Audi 80
-
Audi A6
-
Audi A4
-
Bmw
-
BMW M3
-
BMW 525
-
BMW X3
-
Bmw 5
-
BMW X6
-
Bmw 3
-
BMW X5
-
Bugatti
-
Cadillac
-
Cherry
-
Chevrolet
-
Chevrolet Lanos
-
Chevrolet aveo
-
Chevrolet Cruze
-
Chevrolet Lacetti
-
Chevrolet Niva
-
Chrysler
-
Citroen
-
Daewoo
-
Dodge
-
Ferrari
-
Fiat
-
Ford
-
Ford mustang
-
Ford Fiesta
-
Ford Fusion
-
Ford Transit
-
Ford Mondeo
-
Ford Focus
-
Great_Wall
-
Honda
-
Honda cr-v
-
Honda accord
-
Honda civic
-
Hummer
-
Hyundai
-
Hyundai Santa Fe
-
Hyundai Getz
-
Hyundai Sonata
-
Hyundai Elantra
-
Hyundai Accent
-
Hyundai Solaris
-
Infiniti
-
Isuzu
-
Jaguar
-
Jeep
Repair bumper For example Nissan note.
For the manufacture and installation of the towbar, I needed take off rear bumper... It turned out to be not very difficult ...
Nissan came to us - a blow to the front left corner with a jammed bumper. The bumper was removed to relieve stress and stop the formation of microcracks and plastic fractures in the impact zone.
When removing, we found grain on the bumper absorber and a dried sparrow))) This circumstance made us very happy!
Work on the plastic: the cracks and fasteners of the bumper plastic were soldered, the dents were warmed up and leveled and the general shape of the bumper was restored.
Then we removed the gratings and linings that interfered with painting, once they sanded all the repair zones down to the "bare" plastic on an eccentric machine to exclude the appearance of microcracks and subsidence.
The soldering zones and the necessary places were putty with putty on the plastic, the planes were removed, they were primed with a primer and acrylic primer.
Then everything is finely ground with a developing powder and an eccentric grinding machine for painting. We painted ourselves, assembled the bumper, glued the pads in place and installed the bumper in place.
Bumper repair is not the most difficult event in terms of technology, but rather laborious. Despite the fact that there are enough video instructions on the Internet for self-repairing bumpers, it is still recommended to carry out this repair in a professional service center, which has a set of appropriate tools and experienced specialists in its arsenal.
The K2 service center repairs bumpers at a highly professional level, using modern technologies and equipment. K2 specialists will fix the breakdown of bumpers of any complexity, regardless of the country of the car manufacturer and the plastic composition used.
An example of such a repair is the recent restoration of a Nissan Note bumper. As a result of the accident, the front bumper received deep dents with damage to the paintwork and fasteners. An autoexamination carried out by K2 specialists revealed a violation of the factory geometry of the front bumper.
One of the most significant drawbacks of the vast majority of cars is the high cost of new body parts, so the demand for the service of repairing damaged parts is constant and unchanged. Demand gives rise to the emergence of technologies that can restore even significantly damaged plastic parts, at a cost of repair that is competitive with the price of a new part.
In this case, it is the violation of the factory geometry of the body part that determines the need for repairs in a specialized service. Even having straightened out all the dents on the bumper on your own, you cannot do without an electronic diagnostic system for the correct body geometry after installing the restored part. Practical experience shows that savings on computer diagnostics of the conformity of the body geometry to the factory parameters will eventually result in the car owner in a significant cost of a larger-scale repair.
Repairing dents on a damaged Nissan Note bumper is also a time-consuming process that requires proficiency in deep dent repair techniques and appropriate tools. Compared to metal, plastic is more sensitive to physical impact and requires more careful and careful handling. To restore the ideal geometry of the part, it will be necessary to dismantle it to provide access to the inner side of the bumper.
If you schematically describe the process of straightening dents, then two operations should be indicated - heating the part with an industrial hair dryer and as accurately as possible, even over the entire damage area, squeezing out the dents from the wrong side. Both operations require maximum concentration of attention and colossal work experience. Particular attention is required to work with the bumper stiffeners - they are responsible for the configuration of the part. After straightening the dent, the heated place must be cooled so that the memory of the material does not restore the dent.
This is followed by painting the part. The old paintwork is removed and the part is prepared for painting. The required shade is selected by a computer method for absolute coincidence with the general color of a previously used vehicle. After painting, the part is installed in place. If the restoration of the geometry of the part was done correctly, then the attachment points will completely coincide with the standard ones.
As already mentioned, the need for service in a specialized center, such as K2, arises from the condition that the factory parameters of the geometry of the body as a whole are observed. Improperly reconditioned body parts can compromise the aerodynamic and other functional characteristics of the vehicle.
Car owners will never stop striving for the uniqueness of their favorites. Tuning Nissan Note is still as relevant as it was 10 years ago, when this car was presented to Europe at the Frankfurt Motor Show. The latest updated version of the Nissan Note arrived in Geneva in 2013. Although many changes and improvements have been made to the design of the car, the demand for tuning Nissan has not diminished at all.
Indeed, there is no limit to perfection. Work in this direction is carried out everywhere: from special tuning service stations, with the involvement of specialists, and ending with private garages, where tuning is done by hand. The field of activity in this direction is very extensive.
Body tuning Nissan Note We recommend that you familiarize yourself
The most expensive part of a car is the body. This must be taken into account when making changes to the appearance. The main thing is that they do not affect the stability of the body against external factors and driving safety. A laptop, or rather its body, can get a new design due to the following works:
1. Painting. The tuning elements for applying paintwork to the car body include painting in several colors and airbrushing. Airbrushing is a spectacular tuning. Of course, it will make the Nissan Note absolutely unique, but these services are expensive.
2. Vinyl film. Vinyl wrapping on a Nissan body can be an inexpensive alternative to airbrushing. A film with any pattern is applied to the surface of the body, radically changes the appearance of the car and serves at the same time as a certain protection for the paintwork. Such work can be done by hand.
3. Polishing. This method is especially effective when using polishing polishes applied with a polishing machine.
4. Window tinting. This technique not only enhances the appearance of the Nissan Note, but also carries protective functions. The applied high-quality film neutralizes harmful solar radiation, extinguishes blinding light, keeps shards of hardened auto glass from scattering. If you have certain skills and simple equipment, the work is done independently.
5. Noise isolation. These works on Nissan Note are carried out with a complete disassembly of the car interior. The body is glued with vibration-absorbing and noise-insulating materials. The following are processed:
6. Alternative optics A very advantageous option in tuning the body of Nissan Note is the use of alternative optics. Bi-xenon headlights, alternative taillights, LED strips, an additional brake light radically change the appearance and lighting performance.
7. Accessories. With the help of new DIY design accessories, you can significantly improve the appearance of the Nissan Note. Here you need to choose the right kits, which are widely offered by tuning companies today.
Deflectors are installed on the hood. There are special roof racks for the roof. Lining is fixed under the thresholds. Special spoilers are attached below the front and rear bumpers. The visor clings to the glass. The laptop is equipped with additional electronics: a rear-view camera, parking sensors, etc.
The range of engines offered by Nissan for the Note is as follows:
- gasoline, with a volume of 1198 cubic meters. cm, with a capacity of 79 liters. With.;
- turbo-gasoline, volume 1198 cubic meters cm, maximum power 98 liters. With.;
- turbodiesel, with a volume of 1461 cubic meters. cm, maximum power 78 liters. With.;
- gasoline, with a volume of 1598 cubic meters. cm, maximum power 111 liters. With.
Turbo diesel engine auto
Usually, upgrading these engines involves chip tuning. The firmware (reprogramming) of the electronic engine control unit is in progress. This operation allows you to increase the power of the power unit and reduce fuel consumption. In addition, it makes the engine more flexible and balanced.
- Published on Aug 25, 2016
- For the manufacture and installation of the towbar, I needed to remove the rear bumper. It turned out to be not very difficult, but I had to tinker with pulling out of the brackets.
Thanks ! Everything is clear and clearly visible, I will shoot myself, otherwise at the service station they demanded $ 35 from me for this procedure (remove / put)
Also make a front bumper, that would be very helpful
oh no problem. I need to install a new front bumper but there is no video on TVclip.
In the summer I filmed (cleaned the radiators), but there was no way to record.
Under the bumper, I pumped in a powerful fog light. Because the reverse light was niochem. I liked the lamp from the cunning, so I pumped my own. Now the lof, otherwise, at night, I almost drove into the garage gate. Of course, it is necessary to replace the factory pactronic, because. He is complete shit. Because of the too slow response of this. The bamers were painted twice. Of course, removing the rear bumper, cannot be compared with the front one, the front one still has that quest to remove!
+ Hobby-Pro About rubber, yes, good, I choose between yak-mine and Matador Elite. About mafon. Yes he went to me in a complete set. But he has a price tag of 30 oblique (this is space, not a price tag)
+ Sergey Bodrov I have Mayfun and went to 15tyr. But to be honest, I'm not very happy, it's simple and not very functional, but I chose so that I could connect the amplifiers (but I never got ready (()), my summer tires also died.I will install Yakohama c.drive 2 from the Volga
Cunning-X-Trail. And about the nishtyakov that you installed and do not say, envy. I was a fool, I ordered a full stuffing in the car dealership. But I did not know that the complete set included a crap system from Nissan. the fact that navigation sucks the century before last. To update it, you need another flash with the program, and the price tag is 4500. It's cheaper to buy a navigator. I don’t use a bluetooth phone, I don’t use the phone, the only joy is the sound, but the sound pleased me, for 4 will pull. What kind of TV cameras? I’m not yet pulling, I’ll need 15 for a good piece. Right now, I’m deciding with rubber for the summer, the regular 16th is chic to the gills, and it turned out to be shit, what can I say. Continental sucks. That’s something like that.
Video (click to play). |
Left the front for the summer, you will need to look at the condition of the radiators. I put myself a 2dby radio tape recorder with a screen and a rear-view camera from China. This is a cool thing, while the screen on the radio was broken, without a camera as without hands. You quickly get used to good things. I don’t know about the lantern yet, so I would also need more light, but there’s no time to mess around too much. (who was cunning?)