DIY acrylic bathtub repair yourself

In detail: do-it-yourself repair of acrylic bathtubs yourself from a real master for the site my.housecope.com.

Acrylic bathtubs have long been a leader in the domestic market, since they are affordable, presented in a wide variety of shapes and colors, easy to install and unpretentious in operation. However, even the highest quality product can crack. It is not at all necessary to part with it right away, repairing an acrylic bathtub at home is quite possible.

Polymer bathtubs enjoy well-deserved popularity not only due to the fact that they are able to embody any design fantasy. They are lightweight, for a long time, like cast iron, they maintain the temperature of the water. This is convenient if you are using a boiler for an apartment, it will help you save on utility bills. They are pleasant to the touch and beautiful - snow-white or colored gloss always looks very advantageous.

Stylish and comfortable acrylic bathtub

Of course, a lot depends on the quality of the product itself. Acrylic is available in different thicknesses, the composition of the polymer may vary slightly. Cast acrylic is considered the strongest and most durable, but such bathtubs are more expensive. It is clear that, no matter how much the purchase costs, you will have to take care of the bathroom in any case, preferably from the first days. To avoid big and small troubles, it is better to do it right. Otherwise, the color will fade, the gloss will be replaced by an unattractive cobweb of small flaws. But the restoration of an acrylic bathtub will become difficult. Let's start with what you definitely shouldn't do:

wash heavy objects with sharp corners or surfaces that can scratch acrylic in the bath,
wash animals, whose claws will inevitably leave marks,
drop heavy objects,
pour out coloring agents, for example, hair dye; it is undesirable for the means for fixing the hairstyle - varnishes and mousses to fall on the surface,
clean a dry bath, especially with hard sponges and brushes.

Video (click to play).

What products should not be used to wash an acrylic bath:

containing abrasive substances,
"Hard" chemical preparations containing ammonia, other industrial alcohols, acetone, acids and alkalis, formaldehydes.

How, then, to wash the bathtub? It is best to use a soft cloth or sponge with a special or mild detergent. For example, you can use a common dishwashing detergent that dissolves grease and dirt well. It is better to apply the product for 5-10 minutes, letting it act, and then you can simply rinse it off with running water. Particularly soiled areas can be rubbed with the same cloth.

If rust has formed near the drain or under the tap, you can remove it by dampening a cloth with regular vinegar or lemon juice. These products, by the way, are good at eliminating unpleasant odors, which is also important for bathrooms. Timely cleaning of the sewage system will also affect the state of the bathroom.

In fact, these bathtubs are as practical to use as cast iron or steel, do not be intimidated. And yet, the troubles that may occur are worth knowing by sight. This will save you the time and money it takes to fix them. Traditionally, damage is divided into two groups:

Deep damage to the surface of the bath

Chemical "burns" are caused by improper care and use. Ugly marks on a snow-white surface can leave not only dyes and caustic substances, but also low-quality washing powders or bleaches, if you decide to soak your laundry in them right in the bathtub.

Mechanical damage is much more common. The most common defect can be minor scratches.But deep damage to the surface layer, cracks of various sizes and even through holes also occur. But even a hole of about 100x100 mm can be safely repaired by yourself, without having much experience in this type of repair. This is the main advantage of acrylic bathtubs, because it is much more difficult to restore enamel on metal cases, and it is almost impossible to imagine repairing a hole in a steel bathtub.

Before heading to the store, do a good job of researching the problem you are about to fix. For each case, you will need its own repair kit, why spend too much or run after the missing several times?

Special formulations for the restoration of the bath surface

The main thing is to know exactly how your bathtub is made. Most often there are two types on sale:

vacuum or injection molding,
extruded with a thin spray.

It's pretty simple to define. If the new product was protected by a special film, and on the edge cut the acrylic layer (it differs in color and density) reaches several millimeters, you have a bathtub made using vacuum technology. In this case, the repair will require liquid acrylic made from PMMA.

The extruded coating is not protected with a film, and on the cut it will be seen that the layer is very thin, up to one millimeter. With such baths, the repair kit is often sold together, if not, you need to buy a polyester resin cleaner. Give preference to quality products from trusted manufacturers. These will have high adhesion and the repair will go like clockwork. Otherwise, the acrylic applied to the repair site will peel off pretty soon.

By the way, for small scratches or subtle chips, you only need sandpaper and felt for polishing. You just need to mechanically wipe them and restore the gloss again.

For deeper scratches, it is enough to purchase

... In the case of a major repair of cracks in an acrylic bathtub, you will need:

suitable acrylic of the right shade,
a special degreaser for treating the damaged area.
sandpaper of different numbers.
acrylic hardener (without it, you cannot make repairs).
polishing paper for finishing the repair site or grinding wheel for an electric drill with a special paste.

Ideally, it is better to purchase a set of materials for repairs from the same manufacturer that made the bath itself. This will make it easier to get into the desired acrylic shade.

Pay attention to your own safety. The polymer is often sold as a powder and dilution liquid. To protect your eyes and respiratory tract, use a respirator and plastic goggles. Hands will be protected by rubber gloves. Provide room ventilation.

Small defects in the surface layer appear as a result of careless use. For example, from a regularly falling shower head. It happens that unattractive cigarette stains remain inside the bathtub over time. Eliminating such troubles, as a rule, is not difficult:

1. Take a few numbers of sandpaper.
2. Start sanding the damaged area with the coarsest emery cloth, trying to level the surface.
3. Move to smaller numbers.
4. Having eliminated the defect, polish the place of repair with felt or a grinding wheel using grinding mastic.
5. Wash the bath and you can safely use it.

Bath restoration with special compounds

This method works for both shallow scratches and chemical damage to the bath. But a large, well-visible chip is eliminated differently, using acrylic:

1. The place is sanded as described above.
2. Then washed with soap and left to dry completely.
3. It is processed with a degreaser.
4. The acrylic diluted according to the instructions should be applied with a rubber spatula (usually included). Level the surface, eliminate the chip.
5.Make sure that the patch does not form a bump, it will be difficult to remove it.
6. After drying, polish the repaired area with felt or a polishing wheel with mastic.

Cracks are also mechanical damage, and the stronger the impact, the more significant the damage. At the same time, they have an unpleasant feature - to grow and let water pass. So if you notice even a small crack, it is best to stop using the bathroom until it is repaired. The load - more than one hundred kilograms of water, plus your weight, can lead to irreversible consequences. Repair will not take much time, but then the bathroom can be safely used for many years.

1.Using a drill and a thin drill, we expand the crack to one or two millimeters and deepen it to half a millimeter. Otherwise, even after the repair, she will do it herself, without our participation, under the influence of the load.
2. Grind the crack and the place around it with sandpaper, going from coarser to finest.
3. We treat the place of repair with soap, wash it off, let it dry.
4. Next, we repeat all the stages of chip repair:

degrease
dilute acrylic according to the instructions (usually 50 parts of acrylic and 1 part of hardener),
apply with a rubber spatula, observing the surface geometry. There should be no bump, but leave some stock of material for subsequent grinding, otherwise there will be a dent,
leave for about 6-12 hours to dry. You can cover the place with polyethylene, protecting it from dust and debris,
polish.

Serious scratch on the bottom of the acrylic bathtub

After you have managed to update the bath with acrylic, you can use it in a day. By the way, high-quality grinding at the first stage provides not only optimal adhesion of the surface of the renewed bathtub to the patch, but also avoids loss of whiteness at the place of repair.

Some experts recommend airbrushing the acrylic, citing that it makes the layer smoother. But for the sake of a one-time repair, it makes no sense to buy expensive equipment. With a rubber spatula, with a certain amount of effort, you can achieve not the worst effect.

Another point, if the bathtub is of poor quality or is installed incorrectly - with distortions and the formation of cracks, then acrylic peeling may begin around the crack. Then you need to buy a special glue, drill the exfoliated area, pour glue into the hole and fix it. Once dry, the repair can be carried out as usual by taking in the glue hole as well.

We have already said above, at home and on your own you can even close up a through hole in the bathroom 100x100 mm in size. How it was formed, we will leave it on the conscience of the owners, but it should be eliminated like this:

1. We buy enough acrylic.
2. We clean the place of repair with sandpaper, going from coarse to fine.
3. With my soap, removing fine dust, let it dry.
4. Degrease.
5. We dilute acrylic in the required amount - one layer will require about 50 milliliters. There is no need to do the surplus, they will have to be thrown away.
6. Close the hole with fiberglass and carefully, without haste, saturate with acrylic on both sides with a brush or spatula, going into intact areas.
7. Leave to dry for several hours, protect with cellophane.
8. Repeat the process of creating the patch at least two more times.
9. Be sure to let each layer dry well.
10. Grind the place of repair with a grinding wheel with mastic.

Of course, there is a risk that, doing this for the first time, you will not be able to achieve ideal coverage and the update will be noticeable. But it’s better than buying a new bathtub, especially if this one hasn’t been used for that long.Along with metal and cast iron products, polymer plumbing is also widespread. Acrylic products are very practical, but mechanical damage can cause significant damage to the coating.Repair of acrylic bathtubs is necessary if chipping, deep cracks or even through holes appear on the plumbing.Restoration of plumbing equipment can be implemented in the following ways:

DIY acrylic bathtub repair;

restoration of the product by specialists.

The second method is, of course, preferable, but if you want to save money, you can fix the defects of acrylic bathtubs yourself.Before you repair an acrylic bathtub, it is worth understanding the main problems and causes of malfunctions.The main types of damage to polymer equipment are divided into two types:

Damage resulting from mechanical impact: heavy objects falling onto the surface, burning through the coating. Also, a crack on an acrylic bathtub occurs due to the heavy load on the plumbing;

Chemical attack. Do not be surprised if the acrylic bathtub is cracked after its surface has been treated with aggressive detergents containing chlorine or oxalic acid.

In order to repair plastic bathtubs with your own hands, you will need a lot of patience and a little knowledge. All the necessary theoretical material for troubleshooting polymer equipment is in front of you. So all that remains is to act.What to do if an acrylic bathtub is cracked? Before repairing existing defects, you should purchase materials for repair separately or buy a special repair kit.A standard set of materials for the restoration of polymer plumbing consists of:

rubber gloves and a respirator;

a set of sandpaper;

liquid acrylic;

adhesive for polymer coatings;

polishes.

Tip: You will need glue if there are holes in the coating. Therefore, you need to have a special composition on hand so that you have something to glue the acrylic bathtub. The very method of restoring plumbing depends not only on the type of damage, but also on its size.If an acrylic bathtub bursts or minor defects appear on the surface, the instructions for restoring the plumbing will be the same; in case of more serious damage, a different approach will be needed.First, you need to understand how to close up an acrylic bathtub with small scratches and chips. From the materials you will need:

two-component acrylic;

epoxy adhesive;

sandpaper;

special tape;

For your information: Repair of a crack in an acrylic bathtub up to 3 mm in size is performed using epoxy glue. If the defects reach large sizes, it is worth using tape. In this case, the repair of a plastic bathtub will begin with the process of degreasing the plumbing. After that, a special tape is glued to the crack, after removing the film from it.Repair of an acrylic bathtub with minor defects up to 5 mm in length can be carried out using only the specified materials.Recovery instructions:

To improve the adhesion of the glue to the surface of the product, the crack boundaries are slightly expanded with a knife;

degrease the surface;

acrylic paint is diluted with a hardener;

a small amount of the resulting composition is applied to the area requiring repair;

the treated areas are sealed with tape for five to six hours;

then the film is removed, the repaired plumbing is treated with alcohol, and then polished;

polish is applied to the restored part of the plumbing to obtain a glossy coating.

Video repair of acrylic bathtubs clearly demonstrates the process of restoring the coating with minor damage. The video tells how to repair a crack in a bathroom and what materials to use during restoration.Many people who have bought polymer plumbing are wondering: why is the acrylic bathtub swollen? In some cases, acrylic can break away from the fiberglass, i.e. swell. This can happen for a number of reasons:

Firstly, when the acrylic bathtub staggers, the load on the surface is unevenly distributed, so the acrylic can lag behind the walls of the plumbing;

Second, you might have purchased low-quality equipment that used cheap materials.

An acrylic bathtub repair technician can easily fix this problem, but since the procedure is quite simple, you can do it yourself.Tip: You will need a special glue for gluing polymer materials. In the place of the bulge, you need to make a hole and insert glue there. After the layers are completely glued, repair work is performed to eliminate the usual crack. The algorithm for restoring the coating in case of damage of this kind has already been described earlier.If an acrylic bathtub is leaking, it means that there is serious through damage. In this situation, not just cosmetic elimination of defects will be required, but reinforcement. If the acrylic bathtub is crooked, it is better to reinstall it, otherwise it will leak sooner or later.If this trouble did occur, you should answer the question of how to repair an acrylic bathtub with such damage? First, you will need to get a piece of fiberglass, which will be used to seal the holes. And the process of work itself will be as follows:

the edges of the through crack should be cleaned with an ordinary knife;

damaged areas are treated with fine-grit sandpaper;

then the surface is thoroughly wiped with alcohol;

the defect is covered with a layer of epoxy resin;

after that, the product should dry out for several hours;

the sealed area must be cleaned with sandpaper;

after the surface is smooth, it should be treated with alcohol;

as soon as the surface is degreased, apply polish to a clean soft cloth and process the coating.

Take your time to throw away your plumbing if your acrylic bathtub is cracked. Often, such damage must be repaired. With high-quality work, the repaired products can last from two to five years.Unfortunately, most people ignore the plumbing "hints" that signal trouble is approaching.

If an acrylic bathtub creaks, it means that the plumbing was originally installed incorrectly, or the walls and bottom of the equipment are very thin. But there are ways to eliminate this nuisance.

In a situation where an acrylic bathtub bends, bricks or blocks can be placed under its base. This method is suitable for those whose bathtub is covered with a plastic screen. This solution will significantly reduce the load on the inner surface of the product and avoid cracking.

Look at the purchased polymer product in sunlight, if the acrylic bathtub shows through, this is a bad sign. But you should not be upset, in such a situation you can purchase latex paint, which is applied in bulk to the plumbing coating. This will make the equipment more robust, which will reduce the risk of defects.

Many people are interested in the question, can the restored plumbing last a long time? In any case, the restoration of equipment will extend the life of polymer products for at least a couple of years. Considering the relative cheapness of the procedure, this event is quite profitable.Having figured out how to fix an acrylic bathtub, you can easily eliminate almost any defects in polymer plumbing, carry out restoration and repair on your own. Quaril baths are restored in a similar way.If the acrylic bathtub leaks, the damaged surface should be treated with special glue. Then the plumbing can be used for its intended purpose.A polymer bath can be saved in almost any type of damage, so take your time to get rid of old equipment, because it can serve you for more than one year.

Acrylic bathtubs have become frequent guests of modern bathrooms, because they are much lighter than cast iron, aesthetic, with various types of design. But over time, such products can be damaged, losing their previous neat appearance. How to repair an acrylic bathtub with your own hands and without involving the services of professional plumbers?

Mechanical, arising from careless use of hygiene items.
Chemical, under the influence of strong detergents that leave stains and other non-aesthetic marks.

These problems can be solved by replacing the damaged bathtub with a new one. Or repair an acrylic bathtub with your own hands, restoring the product at a reasonable price.

Before starting the "restoration" of the bath, it is important to determine the color of the product and the material from which it is made. A mismatch in tone can greatly affect the result of the work done, and you don't really want to redo one work twice!

During the restoration period, you will need the following set for the repair of acrylic bathtubs.

A pair of rubber gloves.
Polished disc or sponge.
Bath paste.
Emery sheet from 2000 grains to 800.
Liquid acrylic for deeper chipping.
Drill with a 0.5–1 mm drill bit.
Alcohol solution.
Soft, lint-free swab.

Professionals advise to expand the area of damage so that the adhesion of the old and new material does not differ visually, while the crack in depth and width must be increased by 2 mm.
The surface to be repaired must be degreased in advance with alcohol.
It is necessary to apply the mixture to the damaged area correctly, fresh acrylic should not rise above the old one and be deeper than it.
After the repair of the chips of acrylic bathtubs has been completed, it is important to cover the area with a film with tape and leave it to dry completely for 6-7 hours. It is advisable not to use the bathroom at this time.
After removing the protective film, treat the surface to be repaired with sandpaper, which is included in the repair kit for the repair of acrylic bathtubs.

If the damage is not deep, it is of a superficial nature, then it will be very easy and simple to repair the acrylic coating of the bathtub.

Emery paper of varying granularity is used to clean the damage, first large, at the end - fine.
After finishing sanding, it is required to treat the surface with acrylic bath polish.
In such cases, the repair of the plastic bathtub is completed, but if the scratch is deeper, then you will not be able to do without liquid acrylic.

Cracks on the acrylic bathtub appear due to the fall of a heavy object, wear or other force majeure. They must be removed immediately after detection, so as not to render the entire product unusable.

Cracks in an acrylic bathtub are repaired using epoxy putty. The actions are as follows:

First, sand the damaged side with coarse sandpaper.
Next, drill 1 mm holes on each side of the crack with a drill.
The "blank" is washed out with a soapy solution for the putty, with which the hole is closed after drying.

The applied composition is kept for about 12 hours, after which the area of the restoration is sanded.

How to repair an acrylic bathtub using repair tape?

The first part of the work, before the cleaned damaged surface dries, is performed similarly to the above method, but then a part of the repair tape is cut off, the length of which overlaps the crack by 1 cm on each side of the pothole. The protective film is removed and the sticky side adheres firmly to the crack.

It is important to remove all air bubbles inside the coating. Three hours for complete setting will be enough. It is forbidden to use the bath during this period, so that the liquid does not get under the tape and ruin the whole work.

How can you effectively put plumbing in order when chips and even holes have formed on the acrylic bathtub?

To fully restore the functionality of the device, you will need to perform

repair of chipped acrylic bathtubs in 2 stages.

The surface is cleaned with a coarse putty, the dried layer is sanded with sandpaper.
After the acrylic bath has been repaired, the entire surface of the product is polished. All corners are painted, the bath acquires a natural snow-white color, all cracks and falcons remain in the distant past.

When it comes to deep defects and serious holes, it is better to entrust the work to specialists so that the product will serve its owners flawlessly for many years to come.

For those who are faced with a similar task for the first time, it will be useful to watch the video of the repair of acrylic bathtubs, where, using the example of one of the consumers, all the nuances and main technical tasks are described step by step.

How to repair an acrylic bathtub so that the layers of material do not come off after a while?

Such a defect is possible if the elementary rules for the installation and operation of the product are not followed, and an advanced stage of the manifestation of cracks can cause such troubles. When the edges of scratches or chips come off the bottom layer of fiberglass, you need to take a special glue and glue the base before starting the repair of the bath.

Instead of glue, you can use a fiberglass repair kit that is sold at any store.

People say - the eyes are afraid, but the hands are doing! May your bath be safe and sound. To the question of how to repair an acrylic bathtub, you learned all the necessary answers thanks to the above detailed material.

Using the video during the repair of acrylic bathtubs, you can view in detail all the stages of preparation and the technical characteristics of the features of the plumbing restaurant.

3D projects of apartments
Repair video
Apartment design
All about repair
Doors
Window
Ceiling
Walls
Plaster and putty
Drywall
Furniture
Other about repair
Floor
Leveling the floor
Cement strainer
Dry floor screed
Semi-dry screed
Self-leveling floor
Floor arrangement
Warm floor
Electric floor
Water heated floor
Floor coverings
Tile
Laminate
All plumbing
Water pipes
Bath, shower
Mixers
Toilet
Heating
All electrical
Wiring
LED at home
Ventilation
Building materials
Tools
Materials (edit)
Construction calculators
Renovation of a country house
Miscellaneous articles
Top Review
Question answer
news

If you find an error in the text, select it and press Shift + Enter or Press here and we will try to quickly fix the error.

Thanks for your bug report. We will fix it shortly.

Recently, expensive and massive cast iron or rapidly cooling and noisy steel bathtubs have been replaced by light, modern models made of acrylic. They perfectly retain heat, boast a wide range of sizes, a variety of colors and shapes.

High-quality acrylic bathtubs are quite expensive, the service life of such products, according to the manufacturer's warranty, is at least 15 years. However, in the process of use, a crack or chip may appear on them, which spoil the appearance or even violate the tightness of the container for washing. In this article, we will show you how you can repair an acrylic bathtub with your own hands.

Acrylic is a high performance polymer material. It is durable, durable and lightweight. Bathtubs made of this material have low thermal conductivity and a beautiful glossy shine. Acrylic models are produced in rectangular, oval, round, angular shapes, the width of which is 70-170 cm, and the length is 120-190 cm. The operation of acrylic products requires compliance with special conditions, if ignored, it may be necessary to repair acrylic bathtubs:

Acrylic melts at a temperature of 150 degrees, so it is not allowed to pour boiling water into baths from this material in order to avoid deformation.

Important! As a result of improper use, scratches, cracks or chips appear on the surface of the walls and bottom of the acrylic bath. These defects, as a rule, only spoil the appearance of the product, but do not affect the functionality of the container for washing. To bring the bath to its original form, you can make repairs at home.If, during operation, cracks, chips or scratches appear on the acrylic surface that spoil the appearance of the product, they must be urgently repaired. If left unattended, defects will grow, spread, and then lead to failure of the bath. To repair cracks, chips or scratches in the surface, you can use the following methods:

The fastest but most expensive way is to replace the bathroom. If the product's service life is coming to an end, it can be replaced; in this case, it is more expedient than repairing it.

Image - DIY repair of acrylic bathtubs yourself

In the case of profuse, neglected problems, you can contact companies that repair acrylic bathtubs professionally. Without experience, it is impractical to make a major reconstruction of the product, since it will do more harm than good.

The cheapest way to repair a crack, or how much, is to repair acrylic bathtubs with your own hands. In this case, you only need a special repair kit and a little time, and the termination can be done at home.

Note! If you are going to repair an acrylic bathtub with your own hands, you will need a polishing disc or a regular sponge, bath polishing paste, sandpaper (with grains 800-2000), a mixture for making liquid acrylic, alcohol, a drill, and a spatula. To repair a small crack or scratch, acrylic is not needed, repairs can only be done with polishing.

In the process of improper use of the acrylic bath, small chips or holes may appear. Chips are of 2 types: shallow and deep. Minor scratches are removed by careful polishing. You can repair deep chips with liquid acrylic. If a chip is formed, proceed according to the following instructions.

The acrylic surface around the chip is carefully processed with 800 grit sandpaper.

Important! If you plan to do the restoration of an acrylic bathtub with your own hands, when buying a repair kit, pay attention to the composition of acrylic. It must correspond to the material from which the container is made for washing, since different compositions have different properties, including thermal expansion.

If a heavy or sharp object falls into the acrylic bath during operation, a crack will appear on its surface. To stop the further spread of the defect, it is necessary to repair the coating immediately. This will require a repair kit for acrylic bathtubs and a drill. You must act according to the following instructions:

First of all, all stress on the bath is eliminated. Drain the water, release the container from heavy objects, cool.

Experienced craftsmen say that if you accurately select the color of liquid acrylic to match the bath, as well as carefully and thoroughly sand, after repair the crack will be invisible even in bright light. It is better to purchase a repair kit from the same manufacturer that makes this bath model, otherwise the repaired places will look like dirty spots.

The top layer of enamel on steel and cast iron baths wears out over time. Unpleasant spots, cracks, chips, yellowness appear on the surface. Of course, such a bathtub can be thrown away and replaced with a new one, but restoration will prolong the life of your plumbing and save your family budget. Image - DIY repair of acrylic bathtubs yourself

DIY bathroom restoration

Restoration can be carried out using different methods, including:

application of two-component enamel. The two components are the hardener and the enamel itself. The mixture is applied to the surface like a regular paint;
filling the bath with acrylic (glass). After sanding and thorough degreasing, the bath is filled with acrylic. After 2 days, the updated plumbing is completely ready for use;
bath-in-bath installation. This method consists of installing an acrylic liner that is completely identical to the old bathtub. The insert is attached with glue or foam and allows you to use the restored bathroom for a long time.

Although these methods have their own characteristics, the preparation procedure is completely identical. It is necessary to remove the layer of old enamel and achieve maximum adhesion of the future coating to cast iron / steel.

The following materials and accessories must be prepared:

cleaning powder;
solvent;
cloth-based abrasive paper (for example, P24);
fast-hardening polyester putty for automobiles;
polyethylene, newspapers and masking tape;
vacuum cleaner (or a wide soft brush);
grinder + grinding wheels;
the cloth is clean and does not leave lint;
hair dryer for construction;
screwdriver.

Step 1. We clean the entire surface of the bath with a brush and an abrasive agent (powder).

Step 2. We take sandpaper and clean the bath until there are risks from the abrasive. There is no need to rinse off the cleaning agent when sanding. Instead of sandpaper, you can use an angle grinder with a special attachment. This will greatly simplify the work and speed up the preparation process.

Step 3. After sanding, wash off all the crumbs and soap film well. Etch the bath using oxalic acid. We neutralize the acid with soda.

Step 4. Fill the bath with hot water up to the sides. We wait for about 10 minutes, open the drain so that the water glass, and then wipe the bath with a cloth dry. You can warm up the vessel with a building hair dryer. So the moisture will sooner evaporate and the bath can be further prepared for restoration.

Step 5. We examine the bathtub for major defects, potholes. We apply car putty, and after it dries up, we grind it with fine sandpaper. We remove the dust with a vacuum cleaner / soft brush, after which we thoroughly degrease the entire surface of the plumbing with a solvent and wipe it with lint-free napkins.

Step 6. Unscrew the shower hose. We wrap the spout and taps in polyethylene so that drops of water do not get into the bath during operation.

Wrap spout and taps in polyethylene

Step 7. Armed with a screwdriver, dismantle the drain grate and siphon under the bathroom. We substitute the dishes under the drain hole, into which drops of acrylic or enamel will flow.

Strapping diagram. 1 - overflow pipe; 2 - drain pipe; 3 - metal wedge of the support; 4 - floor siphon; 5 - sewer bell; 6 - metal grounding strip

Diagram of the siphon device in the bathroom

Step 8. We seal all surfaces that adjoin the vessel to be restored with masking tape. Cover the floor, a nearby washing machine, and cover the sink with plastic or old newspapers.

We begin the restoration process.

You can enamel not only a bath, but also a shower tray made of steel and cast iron, a washbasin, a kitchen sink. The entire surface of the sanitary ware is restored, as well as individual areas, if necessary.

This method of restoration is short-lived, but quite economical. A painted bathtub will serve you for a couple of years, after which you will again have to think about painting or replacing it.

Note! The enamel has a pungent chemical odor, so all work can be performed only in personal protective equipment for the respiratory system.

Step 1. Open the enamel and hardener. Pour them into a convenient container, mix with a mixer until smooth (see the exact proportions on the package).

Step 2. With a brush, begin to apply the enamel, making first horizontal and then vertical strokes. We carefully paint over the entire bath.

Advice! To prevent bristles from coming out of the brush, soak it in water for one day!

Step 3. Without waiting for the first layer to dry, apply the second. Gently stretch the smudges with a brush.

Step 4. Paint over the bottom of the vessel again.

The bath will be ready for use in about 5 days. Until this moment, it is advisable not to turn on water and prevent dirt from getting on the painted surfaces.

Such a two-component mixture is quite convenient to apply, does not have a pungent odor and has increased strength characteristics. The starch spreads by itself, and a monolithic even film forms on the surface of the bath. At the same time, the starkril does not dry too quickly, which means that work can be done without haste and fuss.

Step 1. Knead the glass in a convenient container with a mixer.

Step 2. Add the glass from the common dish to a small glass and pour it onto the top edge of the tub. As soon as the trickle reaches the middle of the wall, we begin to move the glass around the perimeter, periodically pouring the mixture into the glass.

Step 3. We repeat the process starting from the middle of the walls. It is not worth saving the mixture, the excess will merge into the container under the hole, and the coating will turn out to be even and smooth.

If bubbles form on the surface, they can be smoothed out with a plastic spatula or brush.

Video (click to play).

The polymerization process takes up to 4 days. The exact instructions for proportions and drying times are indicated on the glass packaging.

Rate the article:

Grade 3.2 who voted: 85