DIY Honda auto repair

In detail: do-it-yourself Honda auto repair from a real master for the site my.housecope.com.

Content

1 repair and operation of Honda Civic Ferio honda civic ferio | Honda Civic Ferio ES1,2,3, EH1, EG7,8,9, EK2,3,4,5 repair and operation, questions - answers, video tutorials
2 Manual for minor repairs of engines Honda (Honda) GX120, GX160, GX200, GX240, GX270, GX340, GX390, GX610-690.

In the video, a specialist tells in detail how to replace the master brake cylinder of a Honda car. More materials on the topic: ► Replacing brake fluid in a Honda car, video ► Replacing the brake pads of a car. How to replace the brake pads yourself ► How to replace the cabin filter Honda Accord VII (Honda Accord), video ► How to get a piston engine? Replacing the piston in

This video shows how to replace the alternator in Honda vehicles. More materials on the topic: ► How to choose a car service? Recommendations for choosing a reliable service station (car service) ► How to repair (restore) a car generator with your own hands? ► Diagnostics and repair of a car generator ► What should be in a car? ► Replacing brake fluid in a Honda car (Honda), video

Brake fluid on a Honda needs to be changed every two to three years. When operating the car in the mountains, in a humid climate or in difficult road conditions, the brake fluid is changed once a year. More materials on the topic: ► Replacing the timing belt in a Honda Acura MDX car (Honda Acura MD X), video ► The volume of car sales in Russia is falling ► How to replace

The air filter in the Honda Accord VII is located in the air cleaner housing behind the glove compartment. More materials on the topic: ► Replacing the cabin filter Honda Pilot (Honda Pilot) with your own hands, video ► Replacing the fuses on the BMW E90 with your own hands (video instruction) ► How to replace the master brake cylinder of a Honda car with your own hands, video ► Oil leak from the turbocharger - causes of leakage, remedies

Video (click to play).

This video shows you how to change your Honda Pilot cabin filter. More materials on the topic: ► Replacing bulbs (bulbs) in BMW E90, video about replacement ► How to replace cabin filter Honda Accord VII (Honda Accord), video ► Replacing rear brake pads Honda Jazz (Honda Jazz), video ► How to repair stove flaps on a VAZ 2108 with your own hands

This detailed video explains how to change the engine oil and oil filter on a Honda Civic. More related materials: ► Does the engine oil pressure indicator light come on? ► Changing the oil in the Honda Civic gearbox (Honda Civic), video ► Changing the engine oil in the Kia Optima and Sorento with your own hands, video ► Changing the engine oil in the car

The Honda Civic crash test was carried out in 2007 and then this car received

Repair of the Honda Civic steering rack begins by unscrewing all the bolts

How to replace the timing belt of a Honda Accord yourself? Process

How to independently replace the headlights of a Honda Accord USA. The most detailed

Detailed video management on replacing the front pads of a Honda CR-V with your own

Below you will find several video

How to make it yourself body work Honda Civic? All about the process withdrawing

How to independently replace the cabin air

How to independently replace the cabin filter of a car

Below is a detailed and available video instruction

How to replace your Honda cabin filter yourself

How to change the gearbox oil in a Honda Civic

Your attention is presented a detailed video instructions for self

How to replace the cabin filter of a Honda car with your own hands

How to change the oil in the box yourself

Honda is a Japanese car and motorcycle manufacturer.

The company was founded in 1948 by Soichiro Honda.

The main components of Honda's success were high reliability of vehicles (one of the leaders in the industry) and modern technological solutions.

The Honda Civic is a compact transversely engineered car manufactured by Honda. First introduced in July 1972. Largely due to this model, Honda entered the list of world automakers.

Honda is a Japanese automobile and motorcycle manufacturer founded in 1948 by Soichiro Honda. The main components of Honda's success were high reliability of cars (one of the leaders in the industry) and modern technological solutions. WR-V Civic [. ]

In the lineup of Honda, a new compact crossover will soon be based. There is little information about him. It is known that the car will be named WR-V. The new crossover should be the ideological successor to the upbeat Honda Fit Twist hatchback sold at [. ]

Before starting to replace the fuel filter, mark the fuel level on the dashboard. The first thing to do is to remove the terminal from the battery. Then release the pressure in the fuel tank for [. ]

The air conditioning filter, more commonly referred to as the cabin filter, is an important component of a vehicle's air cleaning system. As the name suggests, it is obvious that the main function of this filter will be to cleanse the air space inside the car. [. ]

The main symptom of a malfunctioning steering rack is the appearance and, over time, an increase in the characteristic squeak, which may appear unexpectedly, for no reason. The creak reminds of itself in the moments when the steering wheel is installed straight and at [. ]

repair and operation of Honda Civic Ferio honda civic ferio | Honda Civic Ferio ES1,2,3, EH1, EG7,8,9, EK2,3,4,5 repair and operation, questions - answers, video tutorials

Everything you can do with your own hands in the honda civic

07/26/2014 0 12346 Views

ATTENTION! Civic Ferio ES1 caliper boot replacement video.

Today I will tell you how to replace or change the caliper boot with your own hands.

Read completely "

06/30/2014 6 Comments 16961 Views

Dear blog visitors. I will gradually supplement this entry, because I myself do not yet know how to fix a crack in the exhaust manifold of a Honda Civic Ferio.

Whoever faced such a problem, I will be glad to know how they cured.

It is said that these Civics have such a disease. On one of 10 engines, a defective exhaust manifold.

Part number: 18160-PLC-900

AT> its price is 41,000 rubles. Therefore, you need to look somewhere at the auto-dismantling site.

I will add the following to this entry: I was able to seal this crack with a special glue abro thermometal

The first time it did not work, he overheated with a hairdryer, and he swelled up. It should be heated gradually and for a long time. At the same time, the car was parked for about 24 hours. Then the glue is completely solidified. and the heating process with the hair dryer was repeated. As a result, it dried to bone.

1000 km, normal flight, no cracks. Only the sound seems to still pass through micro cracks in the glue. You may need to glue the top again, but the cracks are no longer visible. 1500 km. the glue cracked, it did not help: - (I will change. Exhaust manifold tightening torques:

06/28/2014 2 Comments 17147 Views

The answer to the question is - How to install fog lights on a Honda Civic Ferio. I will place the scheme for installing the PTF at the top and bottom!

I also have little time today, nevertheless I would like to supplement the “instructions for installing fog lamps” with an additional photo report.

So we got around to the PTF (fog lights) and finally I installed them, they lay on my shelf for a long time. Read completely "

05/04/2014 0 13420 Views

List of parts and abbreviations adopted in

"Instructions for installing fog lights on a 2005 Honda Civic Ferio"

10/03/2013 7 Comments 13567 Views

You may have already heard about this method of cleaning the interior. But did you use it? I will tell you how to do this and share my impressions of this procedure.

I removed the rear seats of my tsyvik, for another reason, not related to cleaning the interior, I just needed to carry the overall cargo (the Nissan X-trail QR20 engine - by the way, who is interested, the engine will fit into the elephant tsyvik without an attachment).

06/02/2012 1 Comment 22234 Views

The cable for opening the gas tank flap broke - what to do?
How to replace the trunk cable?
Where can I find the cable for the fuel filler flap honda civic ferio?
How to open the gas tank if the cable breaks in the honda civic ferio?
What to do if the fuel filler flap cable is frozen?
The gas tank does not open, what should I do?
Part number 74880-S5A-305, 74880-S5A-306.

These are the questions to which I will now try to give you an answer!

For one thing, I will tell you what kind of "pitfalls" may be present in this matter

So, the actual cable itself:

trunk opening cable, fuel filler flap honda civic ferio, 74880S5A306, 74880S5A305

Note! The cables are different for different-armed vehicles. For right-handed cable 74880-S5A-306, for left-handed cable 74880-S5A-305. They have different lengths of the part that goes from the trunk to the salon, just the one with which often problems arise in the place where the cable is crimped.

Repair of Honda Fit. Big job. Part 11.

Repair of the folding mechanism of the side mirror HONDA Fit GD

Basically all the brakes of a Honda car have one hydraulic brake cylinder in the caliper. When you use this cylinder, it is understood that the brake pads are located inside the metal caliper and the brake disc is located between the car pads. This caliper does not have a fixed stiffness relative to the brake disc, and the hydraulic cylinder is mounted on a metal caliper.

That is why when the cylinder starts to press against the brake pad, the pad rests against the disc and begins to push the metal caliper, and this is the pressing of the disc against the pad, which is attached to the caliper on the other side. This happens according to one simple principle of the balance of forces, there is both balance and compression of the brake disc. But this is only possible if there is free movement of the metal bracket.

In order for the caliper to move freely, it must be initially fixed in the brake unit itself along the guides that are on a completely flat surface, and are also well protected and lubricated with anthers. Better yet, visit the Honda - Tokyo Service, whose specialists can easily repair your car of any complexity.

If there is a violation of the sealed dustiness, then the repair of the brakes will be carried out in the wrong way, and dirt and moisture can get into the guides. This can lead to difficulty in movement and movement of the bracket, or even to its complete absence, which means that the normal operation of the car brakes will be disrupted.

Malfunction of the brakes in a car can manifest itself in the very process of driving in a variety of ways. For example, a motorist needs a lot of effort on the brakes for any maneuver, or you can observe uneven wear of the car's pads. In this case, Honda repair is the only way out of the situation.

If there is deterioration along one of the guides, then what happens is that your staples are skewed and, therefore, in the future, uneven wear of the pads occurs at a certain angle. And if wear occurs on both guides, then one of the two pads wears out. Or there is no movement at all, that is, after removal, the caliper does not return to its original position and, therefore, one of the two brake pads is pressed against the disc (this can lead to constant friction of the pads on the disc and, as a result, overheating occurs).

For this you need to repair the brakes. To do this, you need to remove the bracket along with the brake cylinder (by unscrewing the bolts that are on the mounting of the guides) and the guides are bushings into which the bolts are screwed. The ends of these bushings are covered with anthers.

The sleeves should easily move inside the bracket along their axis; if this movement is difficult, you need to carefully remove them. The anthers can only be removed after removing the guides. The holes for the guides must be greased, and the parts must be greased. To do this, you must use a special lubricant. Better put on new anthers. Do not use gasoline or thinner for cleaning. Thoroughly clean the calipers and bracket and grease at the slightest impairment of movement.

Posted by admin on Jun 29, 2012 in Machine tool repair

The structure of the front brakes of most Honda car models has one hydraulic brake cylinder in the caliper. The use of one cylinder implies a design in which the brake pads are located inside one U-shaped metal caliper and the brake disc is located between the pads. The caliper is not rigidly fixed to the brake disc, and the hydraulic cylinder is fixed to a metal caliper. Therefore, when the cylinder begins to press one brake pad against the disc, the pad, resting on the disc, begins to push the brace and thereby presses the pad to the disc, which is attached to the brace on the other side of the disc. According to the principle of equality of forces, the brake disc is pressed evenly and simultaneously. But this is only possible with free movement of the bracket.

To ensure free movement of the caliper, it is initially fixed in the brake unit on rails that have a flat surface, are well lubricated and protected by anthers. However, if the tightness of the boot is broken or the general repair of cars in St. Petersburg Honda on the front brakes is not carried out correctly, moisture and dirt can get on the guides. This will lead to difficulty in free movement of the bracket or even to its complete absence, which means that the normal operation of the brakes will be disrupted.

Brake malfunction during driving manifests itself in a variety of ways. For example, you have to press the brake pedal with great effort during a maneuver, or uneven wear of the pads is observed. If the movement along one guide has deteriorated, then the bracket is skewed and, as a result, we have uneven wear of the pads at an angle. If the stroke on both guides deteriorates, then there is more wear on one of the pads. Also, due to the lack of free play, the caliper (after releasing the cylinder pressure) does not return to the neutral position and one of the brake pads remains pressed against the disc, which leads to constant friction of the pad on the disc and its subsequent overheating.

Honda repairs required to correct such faults are as follows. It is necessary to remove the bracket with the brake cylinder, having previously unscrewed a couple of bolts securing the guides. The guides are bushings into which bolts are screwed. The ends of the bushings are covered with anthers. The sleeves should easily move along their axis in the bracket. If movement is difficult or even blocked, you must very carefully remove them. The boots can only be removed after removing the guides. The holes for the guides and the guides themselves must be thoroughly cleaned, rinsed from dirt and various deposits.Parts must be lubricated and reassembled, and the guides must move easily. The lubricant for the brake unit must be special high-temperature and withstand heating up to 200 degrees. Conventional grease under the influence of high temperatures in the brake area burns out and cokes. It is advisable to install new anthers. If this is not possible, then the old anthers must be thoroughly cleaned. Gasoline and solvents cannot be used, since the rubber of the anthers does not have the property of oil and petrol resistance.

In the process of replacing brake pads, the Honda car owner needs to remove the caliper from the caliper and check the movement of the guides. They should be cleaned and lubricated at the slightest deterioration in free play. It is important to carefully inspect the boot for damage, and if found, the unit must be replaced. Such measures will prevent malfunctioning of the brakes of the Honda car, which are an essential element of the safety of its driver and passengers.

On cars of this brand, the front bumper has a complex closed shape. In addition, headlights are installed inside the bumper body, so the developers have tried not only to ensure reliable fastening of the bumper itself, but also to make it as closed as possible from water and dirt. Driving problems in a modern big city are well known to motorists. Traffic-laden streets, heavy traffic, lack of parking.

Remove the following Honda parts: Front outer fender trim, front plastic bumper, grille cover. Unscrew all four bolts, remove, and then pull slightly straight to your side, then up, until you hear a click. Pull to the right or vice versa to the left (respectively, the headlight itself). And as soon as the headlight moves correctly in the groove, you need to be careful not to pull. ...

You can replace the front pads yourself without contacting a car service. To do this, you just need to follow each point described here. The very first step is to wash all brake components with a special cleaner. Unscrew the caliper bolt, lower. The front pads must be accessible. This can be done by turning the caliper upwards. To fix the support in the raised state, you need to tie it up.

To replace the air filter, unscrew the bolts and remove the filter cover. Then the filter element is removed directly from the air filter housing. Subsequently, a new air filter is installed in place, the bolts are tightened back. Some of the sellers in car dealerships are convinced of the presence of impregnation in the original filter, supposedly retaining dust particles, but in fact, there is no impregnation.

To replace the timing belt yourself on a Honda Accord car, you need to proceed in this way. The first step is to bring the engine to the TDC position from the first cylinder, remove the drive belt on the balancing shaft, as well as the front covers. After that, you need to loosen the nut on the tension roller and squeeze the roller itself down. Then you need to tighten the nut and remove it from.

It happens that we need to replace the front bumper of the car. There may be many reasons for replacing it. You can replace it yourself by following the instructions below. Apply the parking brake. Raise the car and put it on the stops. Disconnect the negative cable from the battery and calmly unscrew the center bolts, which serve as fasteners, from the splash shield. From the bumper cover, viz.

The wings of a car are at the greatest risk during operation. This occurs not only from mechanical damage, but also from environmental influences. Therefore, it has to either be repaired or changed. You will learn how to replace the front fender of a Honda car yourself in the instructions below. At the very beginning, you will need to loosen the bolts from the side of the main wing.

We always immediately notice major breakdowns in our car.But we do not immediately react to smaller details. But the correct operation of small parts can sometimes be much more useful. Therefore, always pay attention to the appearance of your car as a whole, including both small and large elements. During the operation of the wiper on the windshield there are uncleaned places, gaps.

While the car is in operation, it very often happens that not only the exterior of the car, but also the internal one, deteriorates. It so happens that the driver's seat for some reason needs to be replaced. And in order to replace it, you first need to remove it. Removing and replacing the driver's seat is quite simple, at least it is quite possible to do it yourself. ...

Replacing the timing belt is a fairly simple procedure that needs to be approached with some knowledge. This manipulation must be carried out if the car's mileage has reached the mark of 100,000 kilometers. First you need to disconnect the alternator belt, and the hydraulic system, which is connected to the steering column. It is not easy to do this, since the space for manipulation is rather limited. Next, you need to disconnect.