Considering the conditions in which the spinning coils are operated - river sand, water or mud - the mechanism can be subject to various malfunctions. Falling into the water also has a negative effect on the operation of the fishing device: it is necessary to change the lubricant in it, as abrasive substances in the water can damage the parts. Various breakdowns can be associated with some features of the device of the coils of individual companies, and, of course, the duration of operation depends on the quality of the selected coil.
This guide will guide you through basic service of your coil, identifying and fixing the most common problems.
The main rule when disassembling, especially if you are doing this for the first time: put all the parts of the mechanism to be removed in order, from left to right. So when assembling you will not get confused and assemble it correctly.
Before disassembling the coil, thoroughly wipe it from dirt, sand and fish mucus with a cotton pad moistened with warm water. For stubborn dirt, you can add a little liquid soap to the water. Use tweezers or a cotton swab to remove dirt in hard-to-reach places. Do not use harsh household cleaners. If the surface cannot be cleaned with soap, you can remove the dirt with alcohol or gasoline. Neglecting the external cleaning step will make it difficult to disassemble the coil.
The coil assembly is carried out in the reverse order, in addition, it is necessary to constantly check the correctness of the installation of the parts during the process.
Depending on the type of coil and its design features, problems may arise during operation, some of which are easy to fix on your own. Let's consider the principles of configuration in more detail:
Carp Fishing for Beginners is a guide to pave the way into the world of carp fishing and big trophies.
The Edible Gum Guide - Expert analytics and detailed breakdowns of the best brands and models of flavored baits.
Prevention of poor-quality operation of a spinning reel begins with respect for it: storage and transportation should be carried out only in a special case. This will protect against external mechanical damage. In addition, exposure to ultraviolet radiation has a detrimental effect on the fishing line.
If the coil gets wet in the rain or falls into water, it is imperative to lubricate the mechanism. Very often, bearings wear out precisely from dry running, and replacing them will cost 20-25% of the cost of the entire fishing device.
At the close of the season, it is also imperative to service the coil.
To carry out preventive measures, you will need assembly instructions, which are included in the set of a proprietary spinning reel. In addition to her, you will need some tools: screwdrivers, a set of tweezers, brushes, cotton swabs, gasoline for lighters (you can replace with white spirit, alcohol or ether), lubricants: liquid oil for external elements, and thick, which will be needed to process parts with full disassembling the coil.
VIDEO
At the close of the season, it is also imperative to service the coil. The first step is to disassemble and clean it. It is cleaned with a cotton pad (and in hard-to-reach places - a cotton swab) dipped in a cleaning solution. The main spool mechanism must be lubricated with thick oil, but do not use grease-based oils for this.Such lubricants tend to coke. On parts made of aluminum alloys, and it is this material that is most often used in coils, it has a destructive effect. Many anglers use household oil, although manufacturers recommend not doing this and using lubricants designed specifically for reels, or at least specially designed to work with bearings.
Manufacturers recommend the use of aerosol silicone lubricants for machining parts that do not need to be disassembled because they are not damaged, such as the bail or bearings. They are safe and easy to use. Silicone grease is liquid and easily penetrates deep into mechanisms, enveloping parts, and does not allow them to rub against each other.
The service life of the coil depends, first of all, on the attitude towards it. Do not continue to use it if you notice the slightest malfunction. Further use without repair can lead to the fact that it will finally fail, and, initially, minor repairs can turn into a complete replacement of expensive parts. You should not skimp on quality when buying a reel if you intend to use it for a long time. Purchasing fishing accessories from trusted manufacturers in brand stores, and not in the markets, will save you from many unpleasant situations.
The mechanism of the reels is constantly tested due to the conditions in which they are used. The presence of sand, dust, water can contribute to various types of breakdowns. Improper use, transportation, untimely repairs and maintenance of fishing reels can also cause them to malfunction. Sometimes breakdowns can occur against the background of their device features or quality. Repair of fishing reels in most cases is done by hand.
If the repair of a fishing reel with your own hands is carried out for the first time, then you must strictly follow the sequence of actions and lay out the spare parts in the order of their removal. This condition is necessary for its correct collection after repairs or preventive measures.
Before disassembling, it is necessary to thoroughly wipe the outer part of the product from contamination with a cotton swab dipped in plain water or using liquid soap. If the dirt is not washed off, you can use more active agents (gasoline or alcohol).
First of all, easily accessible external parts are removed:
clutch nut followed by a spool;
small washers and gears. The main thing is not to mix them in the process of taking them off and put them in the sequence in which they were filmed;
mechanism handle.
Next, the mechanism itself is analyzed:
it is necessary to turn the clamping nut and remove it together with the lining;
the rotor is removed, then the bow and the latching mechanism is disassembled. The line roller must also be disassembled.
The body of the spinning reel is disassembled:
the lever bolt is unscrewed, which is responsible for switching to reverse, and the toggle switch is removed;
the plug is removed and the bolt is removed with a screwdriver;
the wall of the coil is removed. Since this will require effort, to simplify the process, you can take tweezers and pick it up with them.
Analysis of the main mechanism, which includes two gears and a slider. If the reason for parsing is prevention, then it is better not to disassemble the contents, but how to clean the spinning reel and lubricate it with a cotton swab. If the parts are heavily soiled, it is still better to remove them and rinse them well.
Assembling a fishing reel after repair or cleaning is carried out in the reverse order in which the parts are folded. But at the same time, you need to check the correct installation of each part.
Depending on the quality and type of the coil, as well as its design features, breakdowns periodically occur that can be eliminated at home. How to repair a spinning reel and what problems there are, we will consider in more detail.
An important element of the reel is the handle folding system. The simplest mechanism consists of a handle and a hexagon that holds it, and a fastening screw is screwed into it from the back side. The handle with a push-button folding mechanism is more convenient. These handles are more durable and break less often.
The most common problem with spinning rods is their loss. Handles are lost due to improper transportation, careless use of the spinning rod. Sometimes the main mistake of fishermen is screwing in a plastic part, thereby the device loses a lock nut.
it is necessary to insert a new handle, screwing it onto the iron pin, and fix it with a screw;
to prevent loss of the handle, it is recommended to purchase models with additional fasteners, in the form of washers or bushings.
Do-it-yourself repair of the line guide for spinning reels. Dirt or improper throwing techniques can cause this part to malfunction. If there is a problem with the line guide, more serious damage can occur, such as rod breakage or poor throw accuracy.
all fasteners must be carefully inspected and, if necessary, tightened. In most cases, this is sufficient;
if the result remains the same, it is necessary to look for the cause in the tension spring. To find and repair it, you need to remove the coil cover and, having found it, carefully replace it or insert it into place, if it pops out;
in order to prevent it from popping out in the future and to extend its service life, it is recommended to put a rubber gasket under it. Such a spacer will also add elasticity to the spring;
repair of the fishing reel line can be done right on the spot, in the process of fishing, and instead of a spring, you can use a homemade pin.
Line breaks are one of the most common reel breakages.
breaks are mainly due to the locking nut, which is 2 mm larger than the spool in most reel designs. When casting the line, it, clinging, falls under the nut, where it breaks. But it is worth noting that only the braided line breaks, monofilament is not prone to breakage;
the next reason may be premature closure of the line holder bow;
when using inertial reels, line breakage occurs due to wear and seizure of bearings during line unwinding.
if the bearings are jammed, they should be replaced with new ones, and the coil must be disassembled;
in case of premature closure of the bow, it is necessary to replace the retainer and its case, if they are commercially available for this brand;
if the problem is a protruding locking nut, replace the felt pad with a thinner one such as plastic. This will allow the washer to move down a bit and align with the edge of the spool.
Important! In order to prevent breaks, it is also necessary to monitor the line itself, and if knots appear, they need to be eliminated.
In case of reel malfunctions, the line is fed in a spiral.
The main reason for wave feeding of the line is its contamination. If dirt gets into the bearing, it clogs up, stops functioning normally and does not feed the line correctly.
Repair of reels for spinning in this case consists in disassembling and cleaning it. If cleaning is not successful, it is recommended to disassemble the coil down to the bearings, remove the old grease from them and apply a new one.
Noise inside the coil means a broken bearing or one of its parts. Ordinary dirt on the mechanism can also cause noise.It is necessary to immediately stop operating it and repair the spinning reel with your own hands, for this you need:
disassemble the coil according to the technology described above;
if dirt is found, clean it;
carefully inspect all parts for their integrity and replace them in case of breakdown;
reassemble the coil.
It happens that there is an uneven winding of the fishing line on the spool, it occurs along an oblique line, thereby forming a cone. On the main axis there are washers with different thicknesses. If the line is wound taper down, you need to remove one washer. And, accordingly, when the cone is directed upwards, the washer is added.
It is necessary to lay out the spare parts in the order of their removal.
To prevent damage to the coils, it is recommended to take timely preventive measures that will save you from repairs and spending additional funds on the purchase of spare parts.
The first step to long-term use of a product is to treat it with care. What is needed for this:
spinning should not be dropped or thrown anywhere;
often move the reel from one rod to another;
the coil cannot be wetted, and if this happens, it must be dried and preferably lubricated;
during transportation, the fishing rod should not lie among the tools that can damage the reel when shaking the machine. There must be a special shockproof cover for the fishing rod;
after the trip, it is necessary to check all the fastening bolts, which, during the shaking process, could unwind or fly off;
do not store fishing rods in the sun, as ultraviolet light has a destructive effect on the lubrication of the device;
it is necessary to constantly maintain the level of lubricant on the bearings, since in the event of a breakdown, repairs will cost more;
after the end of the fishing season, if you cannot make repairs and maintenance with your own efforts, it is recommended to contact the service center. This is especially true of expensive models, such as, for example, the Ambassador 5600 fishing reel, which is not so easy to repair with your own hands.
Important! Do not throw away the instruction manual for the reel that came with the purchase of the product. It tells you how to care for a particular model.
The next step is timely care. What is needed for this:
every fisherman in his arsenal of fishing accessories must have such means and tools: a screwdriver, cotton wool, tweezers, alcohol, lubricant, liquid soap;
every six months, regardless of the number of days the coil is used, it is necessary to clean and lubricate the entire mechanism;
when lubricating the mechanism, it is imperative to remove the remnants of the old grease, which will begin to coke over time if it is not removed in time. The hardened residues of grease affect the operation of the coil and have a destructive effect on aluminum, from which most of the product is made;
if the coil has a one-piece construction, it is better to use a lubricant with a silicone base or spray (also based on it). This is necessary in order to protect the mechanism from getting wet and lubricate the most inaccessible places, it is silicone grease that allows you to do this.
Having considered how to fix a spinning reel, you understand that any problem can be solved. The main thing is to follow the sequence when disassembling the coil, carefully unfolding its elements and the availability of spare parts. But if you take preventive measures in time, which consists in cleaning and lubricating the coil parts, you can prevent its breakage altogether. Care and care of the product will extend its service life for a long time.
Most of the problems that arise during the operation of the reel and interfere with comfortable fishing, while enjoying fishing, can be quite easily fix it yourself .
Another way out is to trust the professionals by contacting a special workshop.Both the first and second options will allow you to avoid spending on the purchase of a new reel, continuing to fish with the old, familiar and favorite model.
Let's consider how to disassemble a spinning reel, how to assemble, repair spinning reels with our own hands, and also analyze the basic rules for caring for these rather complex devices.
And if you are also interested in finding out the device of the inertial coils or the choice of the baitcasting reel, then read our articles!
Spinning reel selection important point for successful fishing it becomes a pity if the reel quickly becomes unusable, but do not give up, because in most cases it can be repaired.
Before starting to disassemble the coil, it is better to wipe it with cotton wool soaked in water to clear it of dirt, sand and fish mucus.
Disassembling the coil mechanism, all the details of the mechanisms are worth lay out in order right to left or left to right. This will allow you to assemble the spinning reel without unnecessary problems.
first of all it is necessary remove the nut friction brake and spool;
then washers and gears located under the spool;
the next step is unscrew the handle ;
then disassemble the coil mechanism itself : unscrew the clamping nut with pliers or a wrench, remove the rotor;
then remove the shackle of the line and the mechanism that latches it, to disassemble the roller through which the fishing line passes;
unscrew the stopper bolt reverse stroke and remove the switch, unscrew the plug bolt and remove it;remove the coil wall (as a rule, this requires quite a lot of effort);removing the wall, you will see a slider and two gears - this is the main mechanism of the coil if everything is in order with them, you should not take them off.
As for the assembly of the coil, it is carried out in the reverse order.
Internal noise can be caused by dirt entering the mechanism or broken bearings or other parts. If there is noise, the use of a freewheel is necessary stop immediately so as not to make the problem worse. The coil should be disassembled and, depending on the specific cause of the problem, either cleaned or replaced with new parts.
If, during the reeling of the line, there is a rumble and knock, the mechanism periodically jams, and under load (while playing) the reel wedges, this means that there is serious problems in the final drive mechanism. In this case, the drive and driven gear must be replaced with a new pair.
If the bow of the line guide spontaneously switches from the “cast” position to the “rewind” position, this can lead to various problems - from shooting the bait to rod breakage.
To fix the problem, you first need to tighten the bolts with which the bow is attached. In the event that this was not enough, remove the cover, under which the spring is located, and add elasticity to her by installing a gasket on the rod, or change the spring to a more rigid one.
When this problem occurs, the spool handle can rotate freely both forward and backward even when the backstop is engaged. In modern models, the stopper is made on the basis of an overrunning clutch, and the cause of the problem is dirt and grease thickening. The coupling must be disassembled and lubricated with liquid oil. It should be noted that overrunning clutch repair is a rather complicated procedure, which is better to be entrusted to professionals.
The appearance of dents, scratches and other defects on the side of the spool leads to a decrease in the casting distance. In addition, the line is significantly injured by the unevenness of the spool, and its service life is significantly reduced. How to fix it? When such defects appear, they must be grind thoroughly , and polish the surface of the bobbin collar.At the same time, it is necessary to try not to remove the hard-alloy metal deposition from the side, which is present on good modern reels.
On reels with a front friction brake, the clutch retaining nut is located 1-2 mm above the spool edge ... As a result, the line clings to it and falls under the edge, gets tangled and torn. To fix the problem, you should disassemble the mechanism : Remove the retaining nut and clutch washers, then replace the felt spacer with a thin plastic one. This will align the locking nut with the edge of the spool.
If a creak appears, it means that the coil is need to lubricate ... At the same time, it can be difficult to determine which specific parts creak, so the best option when this problem appears is to disassemble, clean and lubricate the entire coil. With a certain skill, this will not be a problem and will not take much time.
If the line comes off in a tight spiral during casting, the reason is dirt ingress into the roller mechanism of the line laying machine. The bearing located there rubs, and the line twists. Accordingly, in order to eliminate the malfunction, it is necessary disassemble, clean and lubricate the roller .
If the line winds on the spool unevenly, resulting in a front or rear taper, it is not necessarily a disadvantage ... However, you should know that the situation can be easily corrected in the right direction. There are several washers of different thicknesses on the main shaft of the reel. To eliminate line winding taper down , one washer should be removed, and if cone pointing up , the washer must be added.
Self-tightening of the friction clutch when blowing off the line - serious malfunction , which may be present on the reels of not the highest quality. It leads to a line break when playing fish and, in a more severe case, to breakage of the coil itself . be careful when fishing .
There are many ways to increase your fish catch, but the most effective units are. Below the editors of the site share with you the 3 most effective ways to increase your catch:
Bite activator. It is a pheromone-based supplement that activates receptors in fish. ATTENTION! The Fishery Inspectorate wants to ban this bait!
Any other bait with flavors is less effective, it is better if they contain pheromones. But the most effective way is to use new for 2016 - DYNAMITE EFFECT!
Learning different fishing techniques. For example, here it is written about spinning wires.
in a short time and with a professional guarantee .
In addition, do not forget that attempts to repair the spinning reel with your own hands can be very difficult Moreover, there is a risk of aggravating the problem.
So, let's take a closer look the advantages of repair by a specialist ... Spinning reel repairman:
can make fast and high-quality repair of spinning reels;
has a large assortment of spare parts for spools of any class;
can carry out high-precision adjustment of the main pair;
uses special lubricating oils.
You can find such a master in any major city.
To prevent breakdowns and malfunctions, first of all, you should carefully transport the coil and handle it with sufficient care in the pond in order to avoid shocks that can lead to a breakdown of the mechanism, try not to dip it into water or put it on the sand.
Cleaning
Grease rapid wear ... Lubrication must be carried out immediately after cleaning the coil from the sand that has got into it. Which oil to use is not as simple as it might seem at first glance.
If this is not possible, you can use any oil that is suitable in consistency, but you need to be sure that it does not contain unnecessary additives and does not destroy plastic parts that are widely used in the production of modern spinning reels. In other words, an oil designed to soften metal-to-metal friction - not the best option .
Careful handling of the coil and regular maintenance will help to avoid serious problems. All malfunctions manifest themselves in one way or another at an early stage , it is on it that these malfunctions are easiest to eliminate. Timely maintenance and repairs will maximize the life of the reel, and it will delight the angler with flawless performance for years to come.
And if you want to gain knowledge on how to install and set up a spinning reel? Read this article.
At the end of the video - the elimination of the self-discharge of the line laying machine on the spinning reel. Happy viewing!
VIDEO
Fishing gives pleasure with its process - each of us knows about it. But in addition to this, we always want to get the result from fishing - to catch not three perches, but a dozen kilogram pikes - this will be the catch! Each of us dreams of this, but not everyone knows how.
A good catch can be achieved (and we both know this) thanks to good bait ... It can be made at home or bought at fishermen's shops. But in stores it is expensive, and to prepare groundbait at home, you need to spend a lot of time, and, in all fairness, homemade bait does not always work well.
Do you know that disappointment when you bought groundbait or cooked it at home, but caught three or four perches? Of course familiar. So maybe it's time to use a really working product, the effectiveness of which has been proven both scientifically and by practice on the rivers and ponds of Russia?
There is such a bait and it's not a myth - TWITCHING LURE ... Yes, yes, it was she. Many people know her, many love her, but only a few know how to use it, which is why there are so many angry reviews about her on the Internet. Someone simply does not know how to read the instructions.
Of course, it's better to try once than hear a thousand times. Moreover, now is the season! A 50% discount when ordering is a great bonus!
Order TWITCHING LURE soon!
Those malfunctions that can arise in fishing reels either completely disable the product, or prevent you from enjoying the fishing process, creating discomfort during operation. In this article, we will analyze the question of how to repair fishing reels of different types - inertial and inertial.
Of course, there is an opportunity to contact specialized workshops for help, or you can try to repair fishing reels with your own hands. This will not only save money, but also experience the joy of doing the work yourself.
Choosing this attribute of fishing, each fisherman carefully thinks over the options and conditions for fishing, and only then acquires a product that is suitable in terms of characteristics. And it becomes a pity if suddenly it becomes unusable. Where to start repairing a spinning reel? The answer is unambiguous - from the disassembly of the product.
To begin with, we will study the phased disassembly of the product, and then we will consider the signs and main causes of breakdowns, which necessitate both the repair of the inertia coils and the repair of the inertial coil with our own hands.
Regardless of whether you have to repair spinning fishing reels or repairing multiplier reels that combine the principle of inertial reels - it is very important to properly prepare and carefully disassemble the product. When disassembling it, lay out each removed element and part in order of priority. This approach afterwards, after you carry out the repair of the spinning reel, will greatly facilitate the assembly procedure.
To clean the product, use cotton wool or a cotton pad previously soaked in warm water.If you need to remove dirt in hard-to-reach areas, use either tweezers or cotton swabs. It is strongly not recommended to use aggressive household cleaners to remove dirt. When repairing reels for spinning, it is better to use gasoline or alcohol for cleaning.
Let's take a look at the disassembly of a spinning reel using the example of a Shimano Catana 2500 FB:
To repair a spinning coil with your own hands, you must first disassemble it. And let's start this process by removing the handle.
The next step is to remove the plastic washers and the sprocket under them.
We unscrew the nut by first unscrewing the bolt that holds it.
We unscrew all the mounting bolts and remove the decorative overlay.
To remove the main gear, you must first unscrew the bolt securing the rod. Then you need to pull out the stem, and then remove the gear.
We remove the remaining gears.
Consider the disassembly using the example of ABU GARCIA REVO POWER CRANK 6-L REEL:
We unscrew the lock nut securing the coil handle.
We disassemble the case of the multiplier in order to get the spool. To do this, unscrew the lock nut,
turn the "cheek" of the multiplier and remove it.
We remove the spool from the multiplier body.
To get to the main mechanism of the multiplier, we remove the part from the axis
and gaskets installed underneath.
Remove the axle brake cover.
We unscrew all the fastening bolts that hold the cover that covers the main mechanism and remove it.
We disassemble the main mechanism. The largest gear is the main gear, it contains the clutch pressure discs.
Carefully remove the decorative strip (http://prntscr.com/giaynv) and remove the slider guide.
Remove the worm stopper, unscrew the lid and take out the "tooth", and then remove the "worm".
The product is completely disassembled, rinse it, diagnose the damage and repair the inertial coil.
To carry out competent repair of inertial coils with your own hands, as well as inertial coils, you must first determine the cause of the breakdown, and do it correctly. Of course, after disassembling the product, you can clearly see the part that is out of order. However, the manifestation of certain symptoms of problems will most likely help to identify the failed part before the coil is disassembled.
Types of faults and their manifestation:
Internal noise. If extraneous sounds appear in the product during use, you should immediately stop using it. It is not necessary that the noise is caused by a damaged part; it can also be caused by dirt trapped in the mechanism. However, if the reason is not in the contamination of the product, then most likely the bearings are out of order. Then, in order to repair the fishing reel, it will be enough to replace the worn out parts.Squeak in the reel. Constant creaking inside the body signals only one thing to the fisherman - it's time to disassemble the reel, clean it of old grease and process it with a new one. Determining which part or assembly is the source of the squeak is quite problematic. Therefore, it is better to carry out a complete maintenance of the product.The line winds unevenly on the spool. Sometimes the following situation begins to occur - the line is unevenly placed on the spool, forming a front or rear cone. The fix is easy enough. If winding is done with a cone down, then it is necessary to remove one washer from the main shaft of the reel. In case of upward cone formation, the washer must be added.
In order for the product to serve you in the long term, you need to properly and carefully operate it, carry out periodic maintenance and promptly respond to any signs of deviation from normal operation of the coil.
Do not postpone the repair of spinning reels indefinitely - delay will only aggravate the state of affairs and accelerate the destruction of not only damaged parts, but also those that interact with them. This will lead to an increase in the cost of repairs or even failure of the product!
Let's take a look at the video of repairing fishing reels with our own hands with a few tricks:
VIDEO Experienced fishermen do not advise disassembling and lubricating a high-quality new reel for 1-2 seasons. In the absence of problems, only light lubrication of the rotating parts is permissible to facilitate sliding. Also remember that some breakdowns can be avoided by knowing the rules for operating the reels - for example, after returning home from fishing, do not leave the clutch tightened, loosen it. This will help to avoid deformation and sticking of the friction discs during a long idle spool!
During fishing, spinning rods are used in difficult conditions, which leads to their frequent breakdowns. Spinning reels are repaired either by professionals in the workshop or in the field. The cost of professional services is sometimes equivalent to the price of a new part. The cheapest way is to do it yourself.
Tackle failures make fishing uncomfortable and annoying. Let's consider how the spinning reel is disassembled and repaired.
When choosing a tackle, the marking gives complete information about the device. The correct selection of parameters promises good luck in the fishing industry.
Spinning coils are marked with symbols and marks on the device body. It contains information about the characteristics and helps when choosing a tackle. Firms have developed uniform standards and are trying to comply with them.
The main body of information is located on the part itself:
size (indicated in numbers);
the amount of line for winding (forest consumption);
coil gear ratios.
The size of the spool can be graduated from 1 to 4 thousand. The value of the number on the marking is proportional to the size of the spool, power and weight, as well as the capacity for the line.
The forest capacity indicator is displayed in the form of markings, for example, 180 / 0.25. In this case, 180 m of line with a cross section of 0.25 mm can fit on the spool.
The gear ratios show how many times the bobbin will turn if the handle is made one turn. Typically, the marking is displayed like this: 5.0: 1. In this case, with one turn of the handle, the reel with the line stacker will make five turns around the axis.
Extended parameters can also be applied to the part, for example, is there a reverse stop. But this information is considered secondary and does not have a significant impact on success in fishing.
Devices of inertialess type have the following components: body, drive, brake clutch, rotor, reel seat leg, reverse direction switch, spool fixing rod, forestry device with bow, roller, gearwheel with bow.
Repair of a spinning reel at home is carried out in the following sequence:
the nut of the brake system and spool is turned off;
gears and washers placed under the spool are removed;
the handle of the coil is dismantled;
the clamp nut in the mechanism device is unscrewed;
the rotor is disassembled;
the line-laying bow is dismantled;
the latch mechanism of the line guide is dismantled;
the line pulling roller is dismantled;
the bolt of the reverse locking device is unscrewed;
the switch is dismantled;
the cap bolt is unscrewed;
the plug is dismantled;
the wall is dismantled.
The main mechanism, consisting of a pair of gears and a runner, remains not disassembled. Disassembling it is undesirable unless absolutely necessary.
To clean the parts of a spinning reel, wet cotton pads and swabs, fresh warm water, preferably distillate are used. To eliminate contamination in inaccessible nodes, cotton swabs and tweezers are used.
When repairing fishing reels and cleaning them from dirt, sand, it is undesirable to use caustic household cleaning solutions. Replace them with gasoline or ethyl alcohol.
VIDEO
Regardless of the type of tackle, when disassembling mechanisms, parts and parts are placed on a clean surface in the sequence of dismantling. This method will allow you to assemble the structure back several times faster.
Before starting the recovery, the spinning reel is disassembled in the following order:
The lock nut is unscrewed, fastening the coil handle.
To remove the spool, the multiplier casing is disassembled. For this purpose, the lock nut is unscrewed, the multiplier "cheek" is turned and removed.
The spool is removed from the multiplier casing.
To reach the main gear of the multiplier, the assembly is removed from the axle and the spacer placed underneath.
The cover on the axle brake is removed.
The bolted connections that fix the cover of the main mechanism are unscrewed and the cover is removed.
The main mechanism is being dismantled. The maximum gear is the main gear, it contains the friction discs of the spinning reel.
The decorative strip is removed, the slider guide is removed.
The stopper of the worm assembly is dismantled, the cover is unscrewed and the "tooth" is taken out, then the "worm" is removed.
After complete disassembly, the product is washed, the coil malfunctions are diagnosed and repaired. For the prevention of malfunctions in the operation of the coil, certain procedures are carried out.
From time to time it is necessary to clean the device from dirt and dust, wipe the bobbin board to remove layers. They lead to wear on the cord and deformation of the collar when the reel handle is turned. But the most important thing in self-prophylaxis of part malfunctions is a timely repaired forestry roller.
The reasons and frequency of roller prevention can be different. It depends on the individual design features. The slide roller unit must be serviced once from 10 to 20 hours of operating time of the device, that is, every three to four fishing trips. A roller based on a ball bearing is serviced at intervals of 40 to 50 hours. This high frequency is caused by the high rotation speed and constant contact with the cord.
VIDEO
Under the roller during operation, by means of a moving cord, water, a suspension of sand, and algae constantly fall. Acting as an abrasive, these substances prematurely wear out the knot, lead to a "cut" in the roller, breakage of the cord and loss of trophies and baits.
Dismantling will require the following tools:
tweezers;
pencil;
crosshead screwdriver;
packing paper napkins;
a set of cotton swabs;
a bottle of liquid oil;
jar of white spirit.
Do not use grease of doubtful composition and origin. A popular option is hydraulic spindle oil.
Before disassembling the line roller, sketch or photograph its position in the assembly. During the entire disassembly process, step-by-step photographic recording should be carried out. The assembly of the spinning reel is carried out in the opposite sequence. How to fix a spinning reel is determined after diagnosing the problem.
VIDEO
Spinning reel repair may be required due to rough handling in gambling fishing. The most popular problems and their consequences arise from contact of a spinning reel with water, careless throwing on sand or ground. The problem may also arise due to a factory defect or through the fault of the fisherman himself. Pay close attention to the washer and bushing of the line roller.
In front-mounted designs, the retaining nut is raised 1–2 mm above the edge of the spool. When the line is wound, it often clings to the nut and sinks under the edge of the spool, which leads to tangling and breakage.
To solve the problem, it is necessary to disassemble the spool with the spool line, unscrew the nut with the brake clutch washers and replace the felt gasket with a similar one made of thin plastic.
If, when winding the fishing line, tapping sounds inside the device, it periodically sticks and gets jammed under light loads, this indicates a failure of the gear mechanism. In such cases, replacement of driven and driving gears is required.
A sign of wear is slight rotation of the device handle in both directions when the lock is on. This is due to the adhesion of dirt or thickening of the lubricant composition. In such a situation, unscrew the backstop bolt, dismantle the coupling, clean and lubricate.
VIDEO
If the spinning reel squeaks or squeaks, you should immediately stop fishing. Noises can appear due to the ingress of dirt, damage to bearings or other components. Such a problem requires disassembling the mechanism, cleaning, lubricating or installing spare parts.
VIDEO
Sometimes, in the process of casting the bait, the line converges in a spiral. This defect is caused by dirt on the line roller. The solution to the problem is to disassemble and lubricate the mechanism assembly.
Occasionally, a defect appears in an uneven, tapered front or rear winding of the fishing line on the spool. In the first case, the washer is removed from the main shaft of the part. And when winding with a cone up, on the contrary, an additional washer is added.
VIDEO
When the line is being etched, a break sometimes occurs due to the self-tightening of the friction clutch. This happens with cheap low-quality parts and the problem is not fixable.
A common defect is the spontaneous dumping of the line-laying bow into the line winding mode. In this case, tighten the shackle screws. If the bow resets itself, try increasing the spring under the cover. To do this, install a gasket on the rod or install a spring with greater rigidity.
VIDEO
At the first stage, the fastening screw is unscrewed. The device is disassembled, taking into account the presence of a washer in the roller cheek. After removing the washer, the mechanism is disassembled. After carefully examining the parts, rinse them in a solvent placed in a container of 50 to 70 grams. Do not rinse the ball bearing, as its grease will be washed off and it will quickly become unusable.
After rinsing the parts, carefully remove any residual dirt and wipe dry with paper towels.
When installing, add one drop of oil per unit. Excess grease is undesirable, since under the action of centrifugal forces, it can get on the line or cord and spoil them.
When installing the roller on the stem, check the ease of rotation. To do this, slide the edge of the folded napkin along the edge of the roller. It should turn easily.
VIDEO
VIDEO
When installing the second bushing, it is necessary to apply half a drop of grease to the bearing. The shoulder with the stem is matched and connected with a screw with tight tightening, but without constriction. The screw must not be processed with a thread lock, since it will be impossible to unscrew it with further preventive maintenance.
After completing the assembly, finally check the work of the video. To do this, slide the edge of a paper napkin over it. The roller should rotate easily and naturally.
Match fishing is intended for casting bait over considerable distances. Therefore, tackle and equipment have special characteristics. The main tackle, designed for long-range action, has a geometry. The spool design has a larger diameter - from 40 to 46 mm. The spool is shallow, and a thin line is used to fill it. The height of the side does not exceed 2 mm.
An additional difference is the presence of a rear clutch. This type of brake can be fine-tuned. The design allows you to fish even large fish with a thin line. The tightening torque is adjustable.
The gear ratio is also different from the conventional design, it is 5.7: 1.
Most breakdowns are easily repaired in the field or at home, with your own hands. Difficult breakdowns are eliminated in specialized workshops. In the event of the slightest malfunction or suspicious noise in the spinning reel, you must immediately suspend the operation of the device and immediately begin to eliminate the problem. Continuing to work with a defective device can result in permanent damage or costly repairs.
Video (click to play).
VIDEO 
