DIY boxing gloves repair

In detail: DIY boxing gloves repair from a real master for the site my.housecope.com.

During intensive use, Velcro tends to lose its original tenacity, which creates problems when fixing the gloves on the wrist. Our craftsmen will be able to quickly solve this problem with a high-quality replacement of old velcro with new ones.

We accept orders for the repair of boxing and hockey gloves from customers not only from St. Petersburg, but also from other regions of the country.

Workshop "Aleganna" offers the repair of boxing and hockey gloves by the hands of our experienced craftsmen.

For boxers and hockey players, hand protection is as important as head protection, so it's impossible to imagine their game without gloves and gaiters. However, the intensive use of these items of equipment does not pass without leaving a trace, and even high-quality models eventually fall into a deplorable state. As a result, the athletes have a choice: to buy new gloves on a regular basis or, if possible, try to repair the old ones themselves?

The Aleganna workshop offers the third, optimal, option - the repair of boxing and hockey gloves by the hands of our experienced craftsmen. Agree, it is much safer, more profitable and easier to entrust this work to specialists than to do the restoration yourself. After all, there is no guarantee that the repair of hockey leggings or boxing gloves will be successful if you do it without the slightest idea about the specifics of the work.

We offer the following services:

Replacing the Velcro... During intensive use, Velcro tends to lose its original tenacity, which creates problems when fixing the gloves on the wrist. Our craftsmen will be able to quickly solve this problem with a high-quality replacement of old velcro with new ones.
Restoration of seams... Many amateur athletes return boxing gloves and hockey leggings for repairs due to the fact that they diverge at the seam. This is not surprising, because the integrity of the gloves is important in fights, and the visual perception of ripped leggings does not cause delight. We will be able to restore seams or install patches, as many of our clients have already seen.
Removing scuffs and holes... With such defects, even the most fashionable and expensive boxing gloves and leggings look sloppy, which is simply unacceptable for professional athletes. In the Aleganna workshop, they can be eliminated and continue to play in impeccable equipment.

Video (click to play).

Why do we offer to restore such important elements of sports equipment here? Here are some good reasons:

We employ real professionals with extensive experience who know a lot about the repair of these products. Many workshops in the city do not undertake to carry out their restoration because of the complexity, but not us!
We accept orders for the repair of boxing and hockey gloves from customers not only from St. Petersburg, but also from other regions of the country. It is enough to write to us by mail, attach several photos of the damaged product for review and wait for the answer of the master. If the gloves need to be repaired, you can send them to us and then get them back in the same way.
Before accepting an order for work, our masters advise the customer on the possibilities of repair. After all, some parts cannot be repaired without a complete replacement. In addition, not all gloves can be repaired due to the high degree of wear and tear.

Putting a patch on a frayed hole in Twins Special leather boxing gloves

WoT Blitz: PokoT_cTpaXa is not a STATIST 6 tháng trước

I figured it out - it is rubbed in the place where you pull the baby, i.e.from the molding itself (it is tough, like sandpaper) - that's the hole. Since I pull with one hand, only one glove has a hole. In general, half a year has passed, the flight is normal, the patch holds. So you can glue it safely

Nikolay Yadrintsev 6 tháng trước

I have 2 pairs of Twins gloves, serve for a year and a half and then the same

I have greenhill, the same hole appeared a couple of months ago, but mine is 10 years old!

WoT Blitz: PokoT_cTpaXa is not a STATIST Năm trước

Nikolay Turkin it's all about the lining. The lining was torn, and a finger rubbed a hole.

At the moment, many people cannot afford sports equipment and clothing made of high-quality materials. It is especially difficult for those who are engaged in various types of martial arts, since it is necessary to acquire not only a special uniform, but also a headdress, gloves and other sports goods. In order to save money, you can make your own boxing gloves. It will be much more profitable and more reliable than purchased items.

Let's figure out how to make do-it-yourself boxing gloves. It is worth considering that such gloves consist of several parts:

Fist.
Palm.
Closed parts.
Thin stripes.
Compartments for the thumbs.

Draw a glove template.
We take into account the size of the palm and the girth of the hand.
We put the stencil on a piece of leather, from which we are going to sew the future sporting goods.
We outline the template with a pen along the contour.
Cut out the details from the wrong side of the material.
We sew parts using a sewing machine.
We make compartments for the thumbs, but do not attach them to the main part.
We fill the main part with padding polyester or cotton wool.
Sew on the cuffs to the product.
Sew on the compartments for the thumbs.

If you performed all the actions in order, then you will get a high-quality item that is practically no different from a store one, because factory boxing products are made according to the same principle.

In order to make boxing gloves at home, you will need:

Leather or leatherette.
Sewing machine.
Cotton wool or some other filler.
Graph paper.

Determine the size of the hand (length, width, girth).
On graph paper, draw all the necessary parts to create a product, taking into account the size of the hand.
After you have drawn all the details, carefully cut them out with scissors.
Cut out the elements on the leather material along the contour of the stencils.
Sew the parts, leaving a few holes for stuffing.
We fill the product tightly with cotton wool.
Sew on the cuffs and attach Velcro to them.

Making a glove at home does not require any specific skills and does not take a lot of time. With homemade boxing gloves, training at home will be interesting and productive.

Sewing a fingerless glove is as easy as making a regular one. You should stock up on all the necessary tools:

Choose the right fabric for your creative process. Leather, fur, synthetic or natural fabric are perfect.
Then you need to purchase paper for patterns.
It is much easier to sew a product using stencils. Measure your arm length, width, and girth. Based on the size, make a pattern.
Trace the outline of the stencil on a suitable material.
Then the finished elements are sewn together, leaving holes for the fingers.

Ordinary gloves are sewn according to this principle.

In order to organize good physical activity at home, first of all, there must be a desire, and then sports equipment. Let's take a look at the main options for sporting goods needed for a workout at home:

Boxing gloves - protect your hands from abrasions and scratches.
Bandages - worn under boxing gloves.
A pear or a bag of sand is necessary for power loads on the muscles of the arms and legs.
Kilogram dumbbells - help you practice your kicks.
Dumbbells with disassembly function - strengthen the muscles.
Bench - needed for special exercises (for example, to strengthen the caviar muscles).

Important! Almost all of the above goods can be made by yourself from improvised means. It is enough just to turn to Internet resources and get acquainted with video tutorials.

Regardless of whether you made your own sports equipment or bought it, as a result of its use, you:

Improve your health.
Tone your muscles.
Improve your dexterity.
Create a beautiful and slim body.
Strengthen your willpower.

It is not necessary to go to the gym and spend a huge amount of money, you can achieve the desired result at home, with the correct distribution of physical activity and the availability of high-quality, reliable sports goods.

Today, making toys from gloves has become a very fashionable trend in needlework. This technique stands alongside the creation of socks, tights and other things. The plus is that you will not have to throw out old things, since you can make an interesting toy or a decorative element in the interior from them. Consider a few original ideas for such toys:

To do this, you need:

Bright gloves.
Thread with a needle.
Floss threads.
Buttons.
Cotton wool.

Place the product so that the little fingers are out.
Cut off the middle and ring finger sections along with a wedge-shaped piece of fabric - you won't need these pieces.
Cut off the extra pieces of fabric, sew the base of the little fingers to each other - this will be the head with the ears of the hare.
Sew the details of the thumb and forefinger - this will be the body and legs of the animal.
Stuff the toy well with cotton wool and sew all the parts together.
Sew on the eyes using buttons.

Important! For these toys, choose products made from soft terry cloth.

To do this, you will need:

Cut off the middle finger of the product.
Sew the little finger and thumb together.
We fill the future toy tightly with filler.
Sew up the hole for the hand, forming the ears of the cat.
We tie the cat's neck with a ribbon and sew on the eyes with a nose.

This is one of the simplest glove toy options. It is enough just to stuff the product with cotton wool and tie it with a ribbon, sewing on buttons instead of eyes.

Important! Such a toy can be decorated with sequins or beads, as well as embroider the octopus's mouth with floss threads.

Any animal can be made from such products, the main thing is imagination and the availability of all the necessary tools.

Returning to the beginning of the seam, we also fix the thread, bring it to the wrong side, cut it, and glue the edge carefully so that it does not stick out.

After that we sew the part between the thumb and forefinger.

With due diligence, the seam is smooth and neat.

Again we try on the stitched part: was everything correctly marked and is it comfortable for the thumb.

If everything is fine, we go to the sewing of the rest of the glove. We take the first rectangle (1), bend it in half with the front parts to each other and insert it between the index and middle fingers of the glove. The index finger should form a "triangle".

After making sure that all the parts fit together and that nothing protrudes anywhere (if it does protrude, the excess needs to be cut off), we begin to stitch.

Particular attention should be paid to this groove between the fingers - the skin there should lie perfectly even, the seam should be tight, otherwise the fingers will be uncomfortable, and the gloves will quickly wear out.

We sew the seam, as usual, in both directions, fix the thread, cut off the excess. We sew on the other side.

In the same way we sew the two remaining parts between the middle and ring fingers and the ring and little fingers.

Memo: the most important thing is to monitor the correct location of the parts to be sewn - the front side is directed in the right direction and the edges without distortions (so as not to sew the left part to the right side or vice versa).

After both gloves are sewn, we try on our creation. The hand should be comfortable, the seams should not interfere, and the fingers should be free to bend. Over time, the skin will stretch further and take the shape of a hand.

Since we have cycling gloves, mostly for the summer, we need to lighten them and add ventilation. And taking them off will be much easier with a wrist strap.

We outline where we should have the button and cut a strip of leather right on the top of the glove. Strip 1 cm wide (to fit the button).

For better ventilation, we also make a round hole in gloves, expecting that it should be 2-3 cm below the knuckles (when the fist is bent) with an indent of 1.5-2 cm on each side of the palm.

We put it on the hand, tighten it on the wrist, mark where the button should be located.

After that, we make two holes with a hole punch: for the upper and lower parts of the button.
With the help of the installer, we fix the buttons (you can use the tools at hand - a pin of the required diameter and a hammer, but this is not very convenient).

We connect the front part of the "cap" button with the lower part, which is in the form of a "donut" on the longer part of the strip that we cut out.

We fix them with the button installer.

In the same way we fix the lower part of the button.

We put the upper and lower parts tightly on top of each other: the pin on the bottom, the button on the top.

We check if everything is well connected and works correctly. Open and close the button several times.

At the end, additional perforation can be made in a semicircle above the cut-out hole to provide additional ventilation. To do this, we make the same holes at regular intervals (about 1-1.5 cm) with a hole punch.

We do the same with the second glove.

After the final fitting, you can go for a drive without fear for the safety of your hands.

Handmade gloves ... will be something to be proud of. In the meantime, we need to think about how to acquire this achievement on the path of life. Rather, examine your hand. You need to know its dimensions before starting. Measure the girth of the hand, palm, and its length. Of course, the gloves are tightened, but it is better that it does not fly off at all. All measurements should be written down so that later you do not suffer in memories. And now you can think about how to make boxing gloves with your own hands from improvised means.

We take out a graph paper prepared in advance (you can buy it at any store with threads). If you use plain paper, you can be wrong with the dimensions, so we use graph paper. On it, you need to apply seven parts of the glove, observing the dimensions taken earlier. Now let's start drawing. Compartment for the thumb (outside and inside), for the palm, "fist" (which we will stuff), cuffs, various stripes that can change depending on what type of glove you decide to make, and closed areas. It's easy to figure out how to make fingerless gloves.

When the details are finished, we cut them out. It's time to get the material that we decided to use in the creation of gloves. Real leather works best, but it doesn't have to. Transfer the patterns (cut out parts) to the fabric and cut them out. If desired, you can cut a separate palm pad. Now it's time to stitch the prepared pieces. It is best to do this on a typewriter, because by hand you can overshoot with the size of the stitches. And since it is sometimes necessary to wash the gloves, the weak seam will simply break.

We sew the parts from the inside. There is no need to rush with the cuffs, and to sew up completely too. We stuff the filler into the remaining unsewn holes, laying it tightly. After that, we look so that not a single seam falls on the fist, otherwise there will be many problems later. But in the future, you can know exactly how to draw better gloves. If everything is fine, then we sew the base with the cuffs and get ready-made gloves. Velcro or lacing can be used as a fastener. Before using your creation, you need to find out how to care for your gloves. For example, in the book “Boxing is the noble art of self-defense”.

Brand new, shining with purity and vibrant colors, boxing gloves inspire athletic feats. But after a few workouts and especially after washing, they look as if they remember the best years of Muhammad Ali. What's the matter? And the point is in the wrong care! But do not worry, there is nothing difficult in the proper care of fighting equipment, the main thing is to remember how to take care of boxing gloves and what should not be done in any case.

Probably the most common question is how to wash your boxing gloves. The answer to it is unambiguous - no way! Gloves can be washed once in a lifetime and then thrown away immediately. After washing, they will not only lose their appearance, but also become a real source of injury and damage.

The only exception is shell gloves. But even in the case of shells, washing in a machine is best avoided, rinsed by hand and dried.

Any advice on tricky ways to wash your gloves should be sent straight to the landfill. The combination of three to six materials of different structures in a glove will never allow you to find the perfect wash cycle. Washing gloves is synonymous with ruining them.

If you can't wash, then how can you get rid of the dirt on your equipment? Very simple - a banal cleaning! To do this, use a regular damp cloth or sponge, which can be used to wipe off any stains on the outside of the glove, pay special attention to the impact surface. For blood stains and other stubborn dirt, use a cotton swab and hydrogen peroxide. A mandatory point in the instructions on how to wash boxing gloves is thorough wiping. After cleaning, the surface must remain dry, otherwise stains and streaks will appear on it, and the skin from frequent excessive moisture will lose its structure and strength.

This is the first most important question, you need to dry your gloves after each workout, even if you are very lazy. If you are too lazy to spend five minutes on equipment after training, you will enjoy the incomparable scent of the men's football locker room hidden in your gloves during the next one.Yes, even one skipped drying is enough for boxing gloves to acquire an incomparable aroma.

How to dry boxing gloves? Very simple - place them in a well-ventilated area, but away from heating appliances and direct sunlight. That is, the option with a battery and a balcony on the sunny side is definitely not suitable. Both will immediately ruin the leather or leatherette, dry out the material, as a result of which it will crack.

Proper drying in 75% of cases prevents unpleasant glove odor and allows you to enjoy comfortable, beautiful equipment every workout. However, if the smell does not disappear after drying, do not rush to throw away the gloves, you can fight the unpleasant odor!

Drying didn't help and the gloves clearly smell unpleasant? The easiest and easiest way is to buy shoe deodorant. You can find it in almost any sports or shoe store. In addition to their pleasant aroma and the function of neutralizing unpleasant odors, such deodorants prevent the growth of bacteria that cause odor. Spray gloves as needed. It is better to do this after training or half an hour - an hour before it, so that the product does not come into contact with the skin of the hands.

A more "advanced" option for getting rid of the unpleasant odor are special sports equipment deodorants. Such products are designed to protect gloves from the formation of bacteria and the growth of microorganisms, protect the fabric from absorbing foreign odors and the effect from them lasts much longer.

Professional methods of odor removal include special activated charcoal tablets. They absorb moisture well, and with it the smell.

Of course, there are also "folk" methods. Wrap a few tablets (preferably 10 to be sure) of activated charcoal in gauze and place in each glove. This is a great way to quickly fix odor problems. However, it is not suitable as a regular measure, it is better to dry the gloves thoroughly.

Taking care of your equipment also includes keeping it properly stored between workouts. It is best to leave gloves to dry, on the balcony (away from sunlight), in general, in any well-ventilated or at least ventilated area. Never store gloves in a plastic bag or tightly closed sports bag or backpack. This is the shortest path to deformation of the equipment, unpleasant smell and untidy appearance. It is also recommended to store gloves in a suspended state, this prevents deformation and damage to the filler.

Read also: DIY car repair tools

With proper care, gloves, even after months, or maybe years of use, will look great and retain all their properties. A little attention, a little care, and your outfit will love you!

Buy gloves for boxing and martial arts on the pages of our website, follow the care rules described above in the article, and they will serve you for a long time, reliably protecting your hands in training.

First you need to understand the nature of the damage. If the machine line is broken, even significantly, the repair will not take much time. If the skin on the cuffs, fingers, arrows (the parts connecting the back and the palm of the gloves) is worn out, or the skin is torn somewhere, the repair will be more difficult.

Violation of the machine stitching along the contour of the fingers or nap (thumb), for example, in the place where it joins the palm of the gloves. First, you need to carefully open the broken seams with a scalpel or razor (carefully - do not cut the skin of the gloves and do not hurt yourself!), Carefully free the parts of the gloves from the ends of the threads with tweezers.

Warm gloves are turned inside out in a special way during repair.If the lining is flannel or flannel, for this you will have to rip part of the side seam, and if it is made of knitted fabric or fur, you will have to cut part of the lining. In the resulting incision, you need to push the leather top of the glove - it will turn out to be inside out - and apply a new seam. In gloves with a warm lining, made without arrows, the lining does not need to be cut - they just rip the old seam half a centimeter above and below the damaged area.

Gloves are re-stitched with sufficiently strong threads, with the same seam with which they were originally sewn, and along the line of old punctures. The knots, of course, must be hidden on the seamy side and at the end of the stitching of the leather top, do not forget to sew the lining if it has been cut:

If the integrity of the skin is violated, patches have to be applied. Here it is useful to show imagination and, if there is a sufficient amount of suitable material, to make not patches as such, but decorative overlays - the same shape on both gloves. They can also cover the fingers. Sew on them with a patch seam. The color of the overlays can be different - the same as the gloves, or the same color, but a different tone, or a different color. For example, dark brown, yellow go well with light brown, white and gray go well with black. If the leather you have found for repair is only enough for a pad for one glove, you can imagine the matter as if “it should be done” and make a patch in the form of a small pocket with an imitation of a button - it is convenient to store travel passes, tickets, etc. in it. P.

Damages on the cuff can be hidden with straps of different widths or their imitation.When repairing women's gloves, damage can be masked with decorative elements - imitations of shiny stones, beads, wood details, especially noble breeds (balls, plates), small buckles, imitation of glove buttons, etc. e. If the skin on the back of the glove is badly damaged, and there is no material for the lining, it is worth making symmetrical or asymmetrical cuts - it will even be piquant. The edges of the cutout must be edged, and the fastener can be made in the form of a loop (leather strap) with a button or an elastic band can be inserted

It is good to use triangular inserts to repair damaged cuffs). They are sewn with an overly seam from the bakhtarmya (seamy) side of the skin.

If the glove needs to be lengthened, a cuff is attached to it in the form of a cuff. The junction is well masked with a patch strap or decorative stitching.

General requirements to be observed when repairing gloves:

The line should go along old punctures, be even and well-tightened, without skipping stitches, without loops and knots, without breaks;

The difference in the thickness of the replaced leather parts of the top, the glove itself and patches and overlays newly sewn to it should not exceed 0.2 mm;

Patches and onlays should correspond to the repaired areas with an allowance of 8-10 mm.

The stitching of patches and overlays should be parallel to the edges and extend from these edges at a distance of 2-3 mm. The sewing frequency on patches and onlays, as well as on gloves in general, is 4-6 stitches per 10 mm of a seam. New holes can be made with an awl.

It's cold outside the windows, which means it's time to warm up! Our master class will tell you how to sew gloves with your own hands. Patterns are included. Gloves can be found in every person's wardrobe. This is an irreplaceable thing in the autumn-winter period. For a woman, gloves are not just a necessity, they are also a fashionable accessory that complements the image. Gloves are different in purpose, material and length. They can be casual, sports, evening, classic, short, long, mitts. In our master class, we focused on suede or leather gloves. But if you are not very good at sewing yet, start with inexpensive materials: knitwear, woolen fabric. Further skill will come and it will be easier for you to understand the cutting and sewing technique.

To get started, check out the diagram showing how to take hand measurements:

The finished pattern to be scaled to fit the size of your hands:

Boxing gloves are an irreplaceable and expensive thing. And after a few workouts, you have to think about how to remove the smell from boxing gloves. This is a painstaking business, because the skin is afraid of water and chemistry. But I know several ways to solve the problem - I'll tell you about them!

The first question to consider before cleaning is whether boxing gloves can be washed in principle. In fact, I do not recommend washing leather items. There are a number of reasons for this:

Improper drying or aggressive washing will harden natural leather, and leatherette will simply crack.

When wet, a poor-quality filler is likely to collapse, which will lead to permanent damage to the product.

Sports gloves usually take a long time to dry as they are thick and filled with filler. This, in turn, causes the active proliferation of bacteria, which can give off an unpleasant odor and cause irritation to the human skin.

Boxing gloves may not tolerate water, so it is best to do it yourself, or rather wash them. There is no exact washing technology, I can only give some recommendations.

Remember, using water, you act at your own peril and risk - poor-quality leatherette can easily crack.

Fundamental rules:

You can soak inventory for no more than 4 hours in water with a temperature of no higher than 40 degrees.
Try to avoid getting water inside.
Use a soft sponge to wipe off stains on the outside, not on the inside with a hard brush.
Do not twist or wring the gloves, but brush off the water by tapping them together.
Remember to wash your boxing bandages separately, preferably after each workout.
If you decide to send the inventory to the washing machine, then set the mode without spinning and with a temperature of no more than 30 degrees.

Washing in the machine does not kill bacteria, therefore gloves should be additionally disinfected.

When washing leather gloves, check the reaction of the material to the selected detergent

How to get rid of the odor in boxing gloves is the most exciting challenge when cleaning sports equipment. I will tell you about the methods of eliminating the absorbed "aromas". However, first, let's turn to the recommendations for care:

Before putting on your gloves, wrap a boxing bandage around your hands to absorb sweat.
Wear gloves in a separate plastic bag to avoid absorbing foreign odors.
Be sure to dry your equipment after each workout.

Dissolve 1 teaspoon salt in warm water per liter of water.
Soak gloves in the solution overnight.

Wrap the gloves in a bag.
Place the package in the freezer for 2-3 days.
Dry inventory thoroughly after removing.

Soak a cotton ball in the vinegar.
Place a cotton swab inside - the vinegar will kill bacteria and odors.
After the procedure, thoroughly ventilate the item.

Place a tea bag in each glove immediately after your workout.

Instead of tea, you can use dried plants - mint, lavender, oak bark.

Pour the entire bottle into the glove.
Shake well.
After a minute, pour out the peroxide.
Air for 2-3 days.

Taking proper care of your boxing gloves can help prevent unpleasant odors. To eliminate amber, it is enough to use special deodorants or antibacterial sprays throughout the entire period of operation.

Instead of expensive products designed specifically for gloves, you can use shoe care products - their composition is almost identical, and shoe products are more accessible and cheaper.

Price: 1200-1500 rubles

Properties: universal spray for all materials.Possesses the unique property of eliminating any odors with high efficiency. One bottle is enough for a long time, and the result will not be long in coming.

Price: 120-150 rubles

Properties: spray neutralizes odor. Its antibacterial components slow down the multiplication of microorganisms that cause unpleasant odors. It has antiseptic properties and a pleasant natural scent.

Price: 200-300 rubles

Properties: Antibacterial spray has a fungicidal effect, reliably preventing unpleasant odors for a long time.

Recommended for use a couple of hours before using shoes or gloves - it takes time to absorb.

Price: 180-250 rubles

Properties: an Italian brand of cosmetics for skin and skin substitutes. The spray bottle has a liquid consistency, has an antibacterial and antimicrobial effect.

To completely eliminate the odor, it is recommended to leave the product alone for 5–6 hours.

Price: 750-850 rubles

Properties: deodorant in the form of pads to be placed in boxing gloves after each workout. The natural properties of natural charcoal absorb moisture inside the gloves and also kill bacteria.

The material from which boxing gloves are made is dense, and the layer of filler inside the product contributes to its drying for a long time - about seven days. During this period, bacteria can multiply in gloves, therefore it is advisable to speed up the drying process.

The ideal boxing glove dryer is available from any sports store. An alternative to this device can be:

crumpled newspaper;
shoe dryer;
hairdryer.

Do not dry gloves on a hot radiator or in the sun - this will damage the material.

Dryer for boxing gloves ensures complete dryness by drawing moisture from the inside

I told about all the methods that I was able to try. They all really work - try it yourself! I will be glad to read all your questions and additions in the comments.You will learn how to take care of boxing gloves so that you have to wash them as little as possible from the video in this article.Good afternoon. I washed Rey Sport leather hand-to-hand combat gloves 2 times, at intervals of 1 year. I did not wash on a delicate wash, as it is advised here (although it is present in the machine), but on a fast one. To be honest, I chose the fast one due to the fact that during delicate wash the gloves stay in the water longer and considered it more risky. I repeat once again, I washed it on a quick wash without spinning at a temperature of 30 degrees, with a liquid detergent purchased from the Sportmaster store. Rinsed with the addition of a conventional conditioner. The first time I just dried it on the balcony, hanging it so that the water would drain as quickly as possible. The second time, I also dried it on the balcony, but after the glass was water, I inserted it into the gloves of the shoe dryer on the advice from the Internet. It seems so far nothing. But, however, gloves for hand-to-hand fighting are slightly smaller than boxing gloves.))