In detail: do-it-yourself siemens porsche design kettle repair from a real master for the site my.housecope.com.
Service centers and repair workshops for kettles SIEMENS
Moscow, st. Bolshie Kamenshiki, 6 to look on the map
The service center repairs almost any device that has electricity! Mobile and small household appliances and electronics. Free diagnostics in any case, even if you are about ...
Optional: delivery of a kettle to / from the service center
Moscow, Kashirskoe shosse, 26, building 3 see the map
Around the clock: +7 (985) 9915852
- Repair of kettles, microwave ovens, coffee machines, air grills, multicooker, bread makers, juicers, meat grinders, coffee grinders
The service center will carry out a quick and high-quality repair of digital and household appliances. As well as repair of power tools. Our workshop has been operating for over 10 years. We are engaged in the repair of equipment of all ...
Additionally: delivery of the kettle to / from the service center, on-site repair of the kettle at home or in the office
Moscow, Novocherkasskiy boulevard, 47 view on the map
Phone: +7 (495) 972-36-20, +7 (495) 348-65-30
- Repair of kitchen appliances: kettles, microwave ovens, coffee machines, blenders, aero grills, multicooker, mixers, bread makers, meat grinders
SIEMENS Authorized Service Center
SC Kumino repairs small household appliances and sells original spare parts and consumables. Sending spare parts across Russia. ...
Optional: sale of spare parts
Moscow, Lianozovskiy proezd, 8, building 5, office 105 look on the map
- Repair of kitchen appliances: kettles, microwave ovens, coffee machines, blenders, aero grills, multicooker, mixers, bread makers, juicers, meat grinders, coffee grinders, hoods
 |
Video (click to play). |
High-quality repair of refrigerators, washing machines, dishwashers, microwave ovens, TVs, water heaters, gas stoves, electric stoves, coffee machines, coolers, hobs, ovens, etc.
Additionally: delivery of a kettle to / from a service center, on-site repair of a kettle at home or in an office, replacement of consumables, installation of a kettle (connection, setup), sale of spare parts
Moscow, st. Rusakovskaya, 7, building 1 look on the map
- Repair of kitchen appliances: kettles, microwave ovens, coffee machines, blenders, aero grills, multicooker, mixers, bread makers, juicers, meat grinders, coffee grinders
Warranty and post-warranty repair of small household appliances Repair and cleaning of coffee machines Sale of accessories for imported household appliances ...
Moscow, 3rd proezd Perov Fields, house 8, building 10, sign Service center. see on the map
Around the clock: +7 (966) 344-33-44
- Repair of kettles, microwave ovens, coffee machines, air grills, multicooker, bread makers, juicers, meat grinders
90 days warranty. If another service center could not help you, then come to us. We restore equipment after other services. Service center in Perovo D ...
- Repair of kettles, microwave ovens, coffee machines, blenders, aero grills, multicooker, mixers, bread makers, juicers, meat grinders, coffee grinders
Warranty and post-warranty repairs of large household appliances Warranty and post-warranty repairs of small household appliances Repair and cleaning of coffee machines Installation of household appliances ...
Moscow, st. Bratislavskaya, 8 show on the map
Phone: +7 (495) 5177548, +7 (495) 3479853
- Repair of kitchen equipment: kettles, microwave ovens, coffee machines, air grills, multicooker, bread makers, juicers, meat grinders
Workshop "MASTER-TV" has been working in the areas of repair of household appliances, repair of TV-audio-video electronics since 2003. We carry out both repairs in our stationary workshop and repairs ...
Additionally: delivery of a kettle to / from a service center, on-site repair of a kettle at home or in an office, replacement of consumables, installation of a kettle (connection, setup)
Moscow, st. Oleko Dundycha, 21, bldg. 2 view on the map
SIEMENS Authorized Service Center
Moscow, Ryazansky prospect 40/2 look on the map
Phone: +7 (495) 5325750, +7 (985) 0209230
- Repair of kitchen appliances: kettles, microwave ovens, coffee machines, blenders, aero grills, multicooker, mixers, bread makers, juicers, meat grinders, coffee grinders
Our service center is: - 7 days a week of continuous work (10.00 - 20.00) - Hundreds of grateful customers - Free diagnostics * (* - really free diagnostics) - ...
Additionally: delivery of a kettle to / from the service center, installation of a kettle (connection, setting)
Moscow, Altufevskoe highway, 84 Pav. 39 show on map
- Repair of kitchen appliances: kettles, microwave ovens, coffee machines, blenders, aero grills, multicooker, mixers, bread makers, juicers, meat grinders, coffee grinders, hoods
Additionally: replacement of consumables, sale of spare parts
- delivery of a Siemens kettle for repair by the service center- - field repair of the Siemens kettle at home or in the office
- - service of replacement of consumables
- - services for the installation and configuration of equipment
- - sale of spare parts for the repair of the Siemens kettle.
Repair prices start at 300 rubles. And the most expensive repairs will cost you 1000 rubles (the kettle does not boil and the repair is turned off). According to the portal> the average cost of repairing a kettle in 2018 is 600 rubles. At the same time, as practice shows, the services of service centers in the city center are somewhat more expensive. Please note that the cost of repairs depends on the model of the kettle, age (degree of wear and tear) and the required spare parts for repair. The exact cost of the repair can be determined only after the diagnostics by the master of the service center. Urgent repairs tend to be more expensive. If you need repairs at home or in the office, pay attention to the presence of the master's departure icon
.
To install or configure the purchased equipment, you can use the services of specialists from authorized organizations (authorized service center), who will carry out all the necessary work for the further operation of the kettle. The addresses of all service centers on the map of Moscow are given at the top of the page. If there is no service center at the indicated address or is located at a different address, please let us know.
Message ELEremont »10 Nov 2010 09:46
Message Smate »10 Nov 2010 17:25
Message ELEremont »10 Nov 2010 21:32
Message Kursk »27 Nov 2010 13:04
Message Smate »27 Nov 2010 21:48
Message vingod »19 Aug 2011 11:47
Message vingod »19 Aug 2011 12:09
Message vingod »21 Aug 2011 12:24
Message pansof »21 Nov 2011 13:59
Maybe someone will come in handy (the power button was pressed badly).
Disassembly diagram of the Siemens TW 91100 kettle:
1. First, the overhead handle has latches on the side, and at the top there is a large latch that can be broken, so you need to start from the bottom up and pull up at the last moment.
2. Then the top panel with buttons. It is better to start from the inside, where the latches are small. Outside, there are two large buttons in the area of \ u200b \ u200b (they are easy to break), you need to move the panel to the center to disengage them. There are also protrusions at the ends of the panel, they can also be broken, the panel is removed to the side of the handle without lifting it up much.
Himself, of course, broke several 
.
Message BDV »01 Dec 2017 11:09
Message transfor »01 Dec 2017 11:32
Message BDV "01 Dec 2017 15:10
I talked. Strictly. 
Even the hammer showed. Did not help.
Message transfor "01 Dec 2017 17:39
The electric kettle has become an indispensable attribute of any kitchen and is the bestseller in comparison with other household appliances. This device is widely used both at home, in the kitchen and in the office. But unfortunately, like any electrical appliance, the kettle breaks down after a while. Since the price of this water heater is not too high, it is easier to buy a new one than to repair it. But if you consider yourself a home craftsman, or an apparatus for boiling water is dear to you as a memory, you can try to repair the electric kettle with your own hands.
An electric kettle works on a fairly simple principle, regardless of whether it is an expensive model or a budget one.At the bottom of the device there is a heating element connected to a thermostat, consisting of bimetallic plate... A tubular heater, when an electric current is applied to it, heats the liquid to a boil. When steam forms during the boiling process, it passes through a special channel to the thermostat, as a result of which the latter turns off the power supply.
If you look at the operation diagram of the device, you will notice that it works on the principle of an iron, and does not differ in the complexity of its design. But before you repair an electric kettle, there are always difficulties when disassembling the case, since the latches (holding the handle) are located differently for different models of units, in addition, the fastening screws can be with a head for a special screwdriver.
An electric kettle is a simple device that contains few elements that can fail. But still, there are common problems, among which the following can be distinguished:
- slow heating of the liquid;
- the device shuts down prematurely;
- the kettle does not turn off;
- the device does not turn on;
- burnout of the heating element;
- water leaks from the housing.
If you notice that the kettle does not heat up the water quickly, then pay attention to the condition of the heating element. Thick layer of limescale on it, formed due to insufficiently good maintenance of the unit, has poor thermal conductivity, which is why it takes more time to heat the water. If the scale is not removed, the heating element may burn out.
In addition, the entire contact group of the device suffers from overheating, as a result of which the contacts melt or burn out.
To get rid of limescale, you can use a regular citric acidsold in stores. It is enough to pour 1-2 bags of citric acid (20 grams each) into the tank, bring it to a boil and leave the heated solution in the container for 30 minutes. After that, the container must be thoroughly rinsed with running water to remove scale residues. If necessary, the procedure can be repeated.
This behavior of an electric water heater is explained by the fact that the device may turn off due to scale formed on the heating element. Since the heating element has a fuse against overheating, it works and breaks the electrical network. To eliminate the malfunction, it is necessary to descale the heaters.
During the boiling of water in the vessel of the apparatus, the steam must be collected under the lid and directed through a special channel to the thermostat. If the lid is not closed tightly, then this does not happen, and the electrical appliance will work without shutting down. If everything is in order with the lid, check that the steam hole on the side of the handle is not clogged with limescale. In the case when everything is in order with the hole, it can be assumed that the kettle does not turn off due to breakdown of the thermostat.
The thermostat at the electric kettle is located at the bottom of the case, and in order to get to it for replacement, you will have to disassemble the device completely.
As an example, a conventional budget device was taken, which does not differ in design from more expensive models - an electric kettle Vitek, Tefal, Polaris, Scarlett and others. By the way, in this model, as in the Vitek VT-7009 (TR), the container is made of heat resistant glass... So, let's analyze the unit according to the following algorithm.
-
Repairing a kettle should start with disconnecting it from the mains... Next, remove the device from the stand (base) and unscrew all the screws on its bottom panel.
After that, it is necessary with special care to pry off the plastic cover on the handle using a thin screwdriver. This should be done carefully because in different models of devices the latches can be located in different places, and it is easy to break them. 
Removing the trim reveals the mounting screws. They also need to be removed. 
At the bottom of the case, you will see all the main elements of the device: contact group, thermal relay and heating element. 
But how to disassemble a Bosch kettle if, when you unscrew all the screws on the bottom, it cannot be removed? Those who disassembled such a device faced difficulties, which often ended in a breakdown of the device. Since the process is quite complicated to describe, it is better to watch a video on this topic.
There are various reasons why your boil machine will not turn on.
- Faulty electrical cord and plug... To do this, you need to “ring out” the cord with the tester, touching the test leads to the contacts of the plug and the contacts on the base (base). If a break is found, replace the cord with a new one.
- Poor contact in the stand (base). From prolonged work, the contacts can burn, due to which their conductivity is disturbed. If fumes have formed on the contacts, they can be cleaned using fine sandpaper. But in the case when they are melted, they will need to be completely replaced.
- Internal switch defective in the device. Since the switch has to experience quite large loads (from 1500 to 2000 W), its contacts can melt over time. This can cause the device to not work. The switch is located at the bottom of the handle, and in case of malfunction it looks as shown in the figure below.
In this case, the button must be replaced. But there is a button malfunction, in which you can fix the kettle with your own hands without replacing it. If you look at the button from the side, you can see 2 contacts, which in the “on” position close. If on them carbon deposits form, the device will not turn on.
To remove carbon deposits, you can use fine sandpaper, a nail file, or a thin file. To make it more convenient to do the stripping, you will need a small "revision" of the button, namely, removing the sides with a pair of nippers.
Another reason that the device does not want to work can be called malfunction of the mechanical power button... This breakdown is most often found in the Tefal vitesse model, since plastic slats are built into the handle of the electrical appliance, which transmit the translational movement from the outer button to the inner one located at the bottom of the unit.
After this part breaks, it becomes impossible to turn on the Tefal kettle. To understand in more detail how to repair an item that has broken, you can watch a video that describes one original way to fix a defect.
When repairing electric kettles, both old and newer, the most common breakdown is heating element burnout. The problem with heating elements arises, first of all, due to their overheating due to untimely descaling.
Before you repair a kettle with a disc heater or a heating element in the form of a spiral, it is necessary to disassemble the unit as described above. After that, take a tester and connect the test leads of the device to the output contacts of the heater. If the light on the device lights up, or it emits a sound, then the heating element can be considered serviceable.
How to check the heating element if no measuring device? It turns out to be very simple. It is necessary to connect zero from the mains to one contact of the heater, and a phase to the other. Next, insert a 220 light bulb into the socket, from which 2 insulated wires are taken out. Touch one stripped end of the wire to one contact of the heater and the other to the opposite. If the light is on, then the heating element is working properly.
If it turns out that the disc heater has burned out, then it cannot be replaced, since it is one piece with the bottom of the electrical appliance, such as in the Scarlett kettle, or Vitek VT-7009 (TR). Therefore, you will have to buy a new unit. Only open-type heating elements can be replaced.
If you notice that water is flowing (leaking) from the reservoir of the device, then it is recommended to use such a device for a while, until scale forms in the microcracks, which can block the seepage of liquid.If this does not help, then you will have to buy a new "boiler" if the warranty period has expired.
Another reason that the reservoir is leaking may be loose connection of the electric heater with the device body (if the heating element is open). In this case, you can tighten the fasteners holding it. If this does not help, then you will have to remove the heating element and change the rubber gasket, which is worn out.
Thus, we can summarize: in some cases it is quite possible to repair the unit for boiling water on our own. But if you do not have enough certain skills in the repair of household appliances, then the best option would be to buy a new kettle. Repair in a service center, from a financial point of view, does not justify itself, and there is no guarantee that the breakdown will not happen again.
Moscow, 3rd avenue Perov Fields, 8s10
Repair of electric kettles, thermo pots, car radios, acoustic systems, karaoke, turntables.
Manufacturers: Siemens, Acer, AEG, AGAiT, Air Comfort, Akai.
+ 7 (495) 565-31-65 (multichannel)
+7 (495) 565-31-64 (multichannel)
Moscow, Ryazansky prospect, 77 (Entrance from the 4th Veshnyakovsky prospect, Workshop sign, go down to the ground floor)
Repair of electric kettles, thermo pots, aero grills, blenders, crepe makers, hobs, fans.
Manufacturers: Siemens, 01THE ONE, 1 TOY, 10moons, 2N, 2VV.
Moscow, Pervomaiskaya st., 69
Repair of electric kettles, thermo pots, MP3 players, radio tape recorders, microphones, music centers, vinyl disc players.
Manufacturers: Siemens, 4Good, A4Tech, AEG, AMD, ASRock.
Moscow, Kirovogradskaya st., 9k4 (Yuzhny shopping center, pav. 2-03)
Repair of electric kettles, thermo pots, MP3 players, car radios, acoustic systems, voice recorders, karaoke.
Manufacturers: Siemens, 4Good, A319, A4Tech, AEG, AIC.
Moscow, Novoyasenevsky prospect, vl7 (TC Kalita, 1 pav.)
Repair of electric kettles, thermo pots, blenders, crepe makers, fans, scales, ironing systems, steam generators.
Manufacturers: Siemens, 4Good, A319, A4Tech, ADA, AEG.
Moscow, Studeny pr-d, 12
Repair of electric kettles, thermo pots, car TVs and monitors, MP3 players, car radios, acoustic systems, dictaphones.
Manufacturers: Siemens, ACME, AEE, AEG, AEROVISION, AIC.
+ 7 (495) 545-06-08 (multichannel)
+7 (901) 543-79-74 (multichannel)
Moscow, Masterkova st., 6 (Shopping center Shoe center, 2nd floor, pav. 1E)
Repair of electric kettles, thermo pots, MP3 players, car radios, acoustic systems, voice recorders, karaoke.
Manufacturers: Siemens, 4Good, A319, A4Tech, AEG, AIC.
Moscow, Zhuravleva pl., 10
Repair of electric kettles, thermo pots, MP3 players, acoustic systems, karaoke, headphones, vinyl disc players.
Manufacturers: Siemens, A4Tech, AAD, ADATA, AEG, AMC.
Moscow, Shcherbakovskaya st., 35
Repair of electric kettles, thermo pots, MP3 players, acoustic systems, voice recorders, karaoke, radio tape recorders.
Manufacturers: Siemens, 3Cott, 3M, 3Q, A&D, A4Tech.
Moscow, Bagrationovskiy prospect, 7k3 (Gorbushkin dvor shopping center, 2nd floor, pav. S2-014A)
Repair of electric kettles, thermo pots, headphones, fans, ironing systems, steam generators, coffee machines, microwave ovens.
Manufacturers: Siemens, AVIS, Acer, Apple, Asus, Audio-Technica.
The organization was checked by the administration of the portal and provided documents officially confirming the conduct of these activities, as well as the conduct of the reception of citizens or the presence of a workshop at the specified address.
Electric kettles tend to break down over time. And when this happens, according to statistics, 30% of people take them to a specialized center for repairs, 55% throw them away and replace the old kettle with a new one. And only 15% of the total are trying to repair the electric kettle with their own hands.
And for the most part, people who decide to carry out repairs on their own are wondering "how to repair an electric kettle at home." The answer to this question is not as simple as it might seem at first glance, but we will try to summarize it in the following sentences.
The principle by which the electric kettle works is simple. In order to warm up the water, it uses an electric heating element installed inside - at the bottom of the device. Such an element can have different shapes. But, as a rule, it is attached to the case using threaded bushings and metal screws that firmly press it against the waterproof seals.
The watertight seals of the kettle have different shapes. For example, they can be presented in the form of a washer, a spacer, or, conversely, have the form of a sleeve. It is because of them that leaks often occur. In the event of a breakdown of this type of seal, the repair of the electric kettle is quite simple, it is necessary to replace it.
The operation of an electric kettle is based on the principle of heating water, at the moment of reproduction of which steam is formed, which comes out through special holes or pipes to a biometric plate or to a disk. Its movement depends on how the electric kettle works. After steam enters the biometric plates, the kettle turns off automatically.
Note that every modern model of electric kettles has a special protective element. It turns off the household device at the moment when water boils or when there is no water. The presence of a protective element reduces the risk of accidents, such as the risk of accidental fire.
Earlier, many people, forgetting to pour water into a classic kettle, turned it on. It is this kind of forgetfulness that has become the cause of a fairly large number of accidents. This, in turn, led manufacturers of electrical devices to develop a modern security system - to create a function to automatically turn off the kettle when the water available in it is heated. There is no water - the kettle will not turn on.
Before proceeding with the procedure for disassembling the electric kettle, we need to check the most obvious things:
- Whether the plug is unplugged from the outlet, and whether the buttons on the electric kettle are turned on;
- The connector, which is responsible for powering the kettle with electricity, does not twitch. If it jerks from side to side, perhaps this is the cause of the malfunction;
- Is the kettle in the correct position, is it standing on the appropriate base or has moved off of it? It is possible, but in rare cases, and it happens only with old models of cordless teapots.
We checked the most obvious things with you, and it became clear to us that the inoperative state of the kettle was not caused by them. For this reason, we must begin to disassemble it, and further identify the reasons that led to its inoperability.
- Remove the lid of the kettle base;
- Next, we unscrew all the screws that belong to the fasteners and are located at the base of the teapot handle, as well as in its upper part;
- Carefully separate the handle from the tea jug, as if from the teapot;
- After that, we need to get rid of the plastic rocker, which is an important component of both modern and old models of electric kettles;
- We remove all plastic parts, basically we get rid of interfering parts - these are various components of the kettle, which are attached to one or another of its elements;
- We raise the kettle switch;
- After that, we need to carefully examine the state of the bimetallic plate, checking it for visible defects. If there are none, then the reason that led to the inoperability of the kettle lies elsewhere.
The reason an electric kettle can slowly heat up water is because there are thick layers of scale on its heating element. To remove thick layers of limescale, we have to buy a cleaning agent, the main purpose of using which is its basic properties,allowing you to fight the layers of scale accumulated in it. After purchasing a cleaning agent, we need to read the instructions on its packaging.
It must be remembered that the principle of using one or another type of cleaning agent can be very different for the reason that manufacturers of such cleaning agents use components and additives of different composition.
The most obvious reason the device might not turn off is a poorly closed lid. If your lid is well closed, then the reason your kettle won't turn off is because the steam opening is blocked.
Yes, blockage is not a common problem, but it does occur. The fact is that the hole can be clogged with lime deposits, which prevent the steam from being redirected to the bimetallic plates.
