DIY garden swing repair

In detail: do-it-yourself repair of a country swing from a real master for the site my.housecope.com.

We would like to repair a garden swing with a broken seat. We decided that the easiest way would be to braid the seat and back around the metal frame of the swing in something like this:

What do you think, the better to braid? Such options as twine, linen cord, old nylon tights, fabric cut into strings, wire came to mind. What else is possible and what is better?

Swings are used outdoors, so the material must be selected that is not only durable, but also withstands outdoor conditions well.

From your proposed options, in my opinion, all are not very successful. Fabric ropes are not an option at all, they will rot very quickly. Tights are stronger, but too elastic, everything will instantly sag, even if you make thick ones, let alone the fact that you will have to unrealistically many of them.

Wire is a suitable option, but the thickness must be at least 3 mm.

A clothesline works best. But you just need to take a nylon rope, which will not sting, and thick enough - from 5 mm.

Alternatively, you can pick up something made of plastic. For example, a polyethylene sprinkler pipe, the diameter is thinner.

There is also a metal cable in a plastic sheath. It is sold in hardware stores as a clothesline. Its thickness is 3 mm, it is strong enough, and the plastic serves as a good anti-corrosion protection.

You can use a willow vine. Cook it, remove the bark. You can combine a light variety with a pink Three-stalk variety, for beauty. She bends better. It is most convenient to bend the boiled rods immediately after removing the bark.

Video (click to play).

If braiding the metal frame turns out to be laborious or you don't like the result, you can make bird cherry on top of it, bending the boiled bird cherry poles along it like a pattern and tying it with wire for several days. After tying, remove the bark. After a few days, the poles will dry out and remember this position, and the wire can be removed. Fasten the poles themselves with self-tapping screws, sinking the cap and filling that place with wooden dust with PVA glue. Drill holes in the poles, put a willow vine in them and weave them according to the principle of fabric. Glue the joints of bird cherry with willow with PVA or cosmophen. The frame itself is made of poles, together with an iron solid, to wrap with a thin willow vine, gluing the ends with a cosmophen into secluded places.

A garden swing is a favorite attribute of a summer cottage pastime for children and adults. The modern market offers a wide range of garden swings: single and family, on chains and stationary metal profiles, sitting and folding into a full bed. However, the classic standard swing for 2-3 seats is undoubtedly popular. Every person gets used to household items, and when a favorite resting place fails, the burning question arises of replacing the garden swing. But what if you apply a little imagination, make an effort and fix the swing, giving them not only a second life, but also endowing them with such qualities as reliability, strength and durability? Two of the most popular ways to restore a garden swing will be discussed in the article below.

Often, in order to reduce the cost of the final product, manufacturers make the seating part of the swing from stretched fabric. The swing frame is made of metal, and the seat and back are made of durable fabric with a high degree of stretch. Since the garden swing is rarely moved from place to place, the seat can withstand increased loads in the form of rain, wind, snow, hail and other meteorological troubles.If the swing is closed during the fall and winter, then even in this case, it is impossible to protect the seat from high humidity under cover. Due to such difficult conditions, the fabric becomes thinner, becomes fragile, and sooner or later it bursts or diverges along the seam. What to do in such a situation? I always advocate trying to fix it before agreeing to a new thing, especially since a repaired garden swing will not only save the family budget, but also become a source of pride for the owner of the house. Follow the step-by-step instructions for restoring a garden swing, the work will not take you much time:

Free the metal frame from the fabric. Inspect the frame for rust, damage, or dirt. Now is the time to fix the shortcomings, if any. Clean off dirt, remove rust, paint over the frame with metal paint. Use a spray gun for this purpose.

To restore the seat and back of the swing, you will need a beam or lining. The length of the wooden runners must be at least the length of the swing. The width is not important, lay out the beams next to it, determine how many units are needed to fill the width of the seat and back on the swing. Since the swing must be able to withstand not only a child, but also adults, it is advisable to use a bar of at least 3 cm in thickness, but if there is less material on the site, it is not necessary to spend money and buy new bars. When assembling the seat and the back of the swing, lay out the transverse beams more often, screw them down - nothing is scary for such a seat.

Think about the shape of the seat, if necessary, use a jigsaw to round the front boards on the sides.
There are two ways to get rid of wood splinters. The pieces of wood can be burned with a burner and then sanded. Or the more traditional way: use a sander with a coarse grit and a second wheel with a fine grit, the surface should be perfectly smooth when passed by hand. Fix the result with clear or tinted wood varnish.
Make holes in the planks and metal frame of the swing with a drill. Connect the parts and secure with the furniture bolt. The swing remains to be decorated with a mattress or pillows.

When male help is not available at the moment, there is another common way to restore a broken swing, a step-by-step plan for which I will describe below.

The first stage of this method is similar to that described above. We get rid of the torn fabric, inspect the frame, if necessary, eliminate the shortcomings, if desired, paint the frame in a new color.
The method of restoration consists in literally pulling the swing frame with a rope (you can replace the rope with patches of strong fabric). To prevent the rope from rotting ahead of time, to withstand atmospheric precipitation, it is necessary to choose the right rope. A quality option would be a nylon or silk thread. Fix the thread in one of the corners, and begin to braid the swing, alternating the loop on the seat, on the armchair, and so on until the end. You can strengthen the weaving with longitudinal threads. Place a mattress on top of the finished weave. The swing is ready!

Do-it-yourself restoration of a garden swing will not take very long, and the joy of using and the pride of the owner will be endless!

Each person is special and everyone's experience is unique. Tell us about yours. Earn recognition and gratitude from our readers.

Garlic planted in the garden before winter is called winter garlic. Planting garlic before winter has a number of advantages over spring planting: the plant is strong and healthy, it undergoes natural hardening in the form of frost, in spring you will harvest the first harvest of garlic, and in addition, winter garlic is loved by most housewives for its excellent pungent taste, high keeping quality and the possibility of eating not only for food, but also for conservation.

A room with invisible walls

Here we have garden swing broke... We only served for a year. Apparently, the fabric is so unreliable, or maybe the excess weight affected them (seemingly infrequently). Perhaps you will be comforted by the fact that such cases are often discussed on the Internet 🙂

What to do if the fabric on the garden swing is torn?

The first thought, of course - sew new... The pattern there, of course, is primitive - an ordinary rectangle:

But for this, firstly, you need to find and buy a suitable durable fabric and threads. Secondly, having sewn the cover, it will be possible to put it on only by untwisting the entire structure of the swing.

Second an option for handy men is to get rid of the rags and make a full swing out of the boards. It turns out cool! But also not our option.

So we went along the third paths. I sew badly, I didn't want to bother. But you can replace the fabric of the swing ... with twine!

The cords in hardware stores are usually very thick and expensive. We figured that if a swing has a back and a seat 1 meter wide, it is wrapped in half ... twine needs 400 meters!

As a result, we bought in "Ashan" a polypropylene cord knitted with a core (made in Belarus), 3 mm, withstands 50-55 kgf - what you need :). A 20-meter skein cost 20 rubles.

In total, it took about 20 skeins:

The swing is ready for duty again 🙂

A year has passed ... The swing is slowly rusting :(. I had to buy a thicker string and replace the front sticks with it.

Let's see how long our rocking chair will last.

Hello everyone!
I haven't written here for a long time, since there were no special renovations in our apartment. But! Now we are actively engaged in our garage and the area around it. For clarification, I will say that we live in an apartment, and sometimes we want to sit and relax in nature. We live outside the city, an apartment building with 20 apartments in total, and next to it, across the courtyard, there is a garage plot for about 10 garages. So we decided to decorate and equip our garage little by little. We have not yet reached the point of arranging it inside, so we are actively working outside. 2 years ago we planted grapes and various weaving flowers. A year later, we ourselves cooked the frame for the grapes and now we can't wait until our grapes will give not only fruits, but also a shade))) In the meantime, for the summer we hang a shade net. The frame, like the garage door, was painted with enamel in a beautiful (for me 🙂) khaki color. Then they plastered and painted the front wall and made a crate on it for decoration and so that the flowers trailed along it 🙂

Now, this spring, we started to implement our new idea - a garden swing!) The idea was to make them removable, and so that they cling to the upper beam of our vineyard frame. We bought a metal square 30x20, my husband made a model in 3D, cut out everything according to the drawings and welded it himself.

Then I primed and painted the frame.

The seat and the back of the swing were made of wood, after pre-processing it, they were painted with a special agent for wood.

The stage of "fitting" pieces of wood 🙂

The photos were taken even before tinting the ends and finishing any imperfections)))

This was the first time my friends and I experienced the swing, now we often have dinner in the summer near the garage, frying something tasty on the grill 🙂 The tests were successful, even after my centner godfather almost jumped on it)))

Of course, the production did not go without jambs, without this, for the first time, nowhere. But we are happy with our creation like boas. It remains only to sew beautiful pillows that are already in the project.

Now, briefly about the construct.
The swing is 180 cm long, which is very convenient, 3 people sit freely or 1 person lies comfortably)))) The seat was made wider - 60 cm, back height 70 cm, then these dimensions will decrease even more due to the thickness of future pillows. The swing is suspended on a chain through springs with a hook on a loop made of reinforcement, which we welded to the upper beam of the vineyard. The swing is removable, the husband can easily put it on himself.The height of the seat at the swing, as well as the angle of inclination, are adjusted by changing the attachment point on the chain links. In general, quite a variable design came out. I hope the explanations were clear 🙂 If you need additional photos - I will do it 🙂

Thank you all for your attention and come visit the barbecue 🙂

How to fix a garden swing (the fabric of the seat is dilapidated). It is probably possible to take off the old and put on the new, but it is very difficult.
I asked in “Dacha, garden. “But there was only a link to the cushions for the swing. Pillows are good, but if there is nothing to put them on, what good are they?
Who can advise, pzhlst.

*** The topic has been moved from the conference "About your own, about a girl's"

7ya.ru is an information project on family issues: pregnancy and childbirth, raising children, education and career, home economics, recreation, beauty and health, family relations. The site has thematic conferences, blogs, ratings of kindergartens and schools, articles are published daily and contests are held.

If you find errors, problems, inaccuracies on the page, please let us know. Thanks!

A couple of years ago we bought a garden swing for our summer cottage. In the warm season, they were outside, in the open air, exposed to rain and sun. Like most of the goods sold in Russian stores, the swing is made in China, respectively, they are inexpensive, although the quality is quite acceptable. Although the swing is a garden swing, which implies that it will be used outdoors, the seat, which is made of fabric that looks quite strong, could not withstand the effects of rainwater and scorching sunlight.

One summer day, it burst under another lover of quiet rest. Having examined the place of the gap, it became clear that the fabric was simply worn out, so it makes no sense to sew it up. Repair or alteration required. You can replace the fabric with a more durable look, but the cost of the material and work will be higher than the price of the swing itself. Therefore, it was decided to make a seat from pine gaps, of which, after the construction of the house from a bar, there were plenty of them.

Garden swing - dimensional drawings and experience of FORUMHOUSE participants. We make our loved ones a comfortable recreation area.

If a swing of the simplest design is enough for children - two suspensions with a wooden crossbar and so that they fly higher, then adults want comfort. Garden swing for adults is more like garden furniture, a hanging sofa on an independent bed. Nobody is going to take off into the heavens like a child, but for a pleasant rest on the site in the fresh air - it is the most it. Purchased garden swing costs significantly, while in case of self-production, the cost of the material is several times lower. In this article, users of the FORUMHOUSE portal share with everyone the experience of making homemade garden swing with a canopy and in the open air.

The swing design consists of several main units:

Most often, the frame is assembled from two triangular a-shaped side supports with jibs and an upper transverse beam to which the seat is attached. Supports can be solid - with a base or with an emphasis on two points, less often they are additionally reinforced with a frame around the entire perimeter. Another popular option is a rectangular frame on four posts, such a swing resembles a light, airy pergola or a compact gazebo.

The seat is made in the form of a bench or a sofa. In the first case, it is static - only one position, in the second - folding: the sofa turns into a bed. Depending on the design, the sofa can have several adjustment positions. The simplest option is a static bench on a flat frame. More difficult, but also more convenient to use is the ergonomic design of the swing - curved shape, with a recess. Adjustment of the sofa layout is carried out either by the device of a special frame with stops, or by changing the height of the backrest attachment to the suspensions. To relax on the swing was more comfortable, they are equipped with removable mattresses or double pillows, which are removed during bad weather.

Chains are used as suspensions, sometimes ropes, less often - a rigid hitch with a metal profile or a wooden bar. If the hitch is rigid, increase the distance between the edges of the seat and the supports to avoid serious injury. The suspensions are attached to the support beam on an anchor (eye bolt) and carabiners or on brackets with bearings. The first option is the most common: everything you need can be bought at any hardware store. With the second, it is more difficult, here you need either turning skills, or the opportunity to place an order with a professional.

As a homemade canopy, a lightweight frame is usually made, on which you can then stretch an awning or fix polycarbonate. Less commonly, a miniature rafter system is used, covered with a soft roof or other materials. In a simplified version of a garden swing, there is no canopy at all. If the choice is made in a crawl about the semblance of a pergola, then it is planted with weaving perennials, which eventually entwine both the side posts on both sides and the top.

Users of our site independently make two types of garden swings - wooden and metal. In wood, all parts of the structure are made of timber and boards, and in metal there is a frame made of pipes, and the seat is sheathed with wood.

Wood as a material for a garden swing is chosen both because you like its appearance, and because waste remains from the construction site, from which you can build a swing, adding a little to additional elements. Working with metal requires welding equipment and some skills.Wood, on the other hand, can be connected to a thorn-groove system and bolted fasteners, and almost every home craftsman has a tool for processing it. An important rule: in order for the tree to serve for years, it is pre-treated with protective compounds.

A swing for a summer residence has been brewing for a long time, but the economy options from frail pipes of suspicious metal, for three to five thousand, looked traumatic, and more serious specimens for comfort demanded to give these thousand at least ten to twenty, or even all thirty. The budget and own thrift did not allow such spending on the swing, and I really wanted them, therefore, despite the lack of much experience, it was decided to do it myself.

A stock of lumber remained from the previous construction, the missing board and timber, fasteners and finishing materials for wood were purchased. The design was chosen simplified - supporting side triangles, cross member, seat on chains and carabiners, bolted assembly. The spouse made a soft foam mattress - foam rubber in a colorful cover.

It is not difficult to make a garden swing with your own hands if you know how to handle tools. All work can be completed in one or two days.

You can design them from almost everything that comes to hand:

Wood: beams, trimmings, logs, planks from boxes, boards, slats, benches.
Metal: pipes, profiles, rods, wire, chains, rings, hooks, sheets.
Plastic: boxes, chairs, hoops, pipes.
Shaped parts from the sewage system: tees, elbows.
Bearings.
Ropes, ropes.
Tires.
Thick fabric, tarpaulin.
Housings and seats of old cars and motorcycles.

As you can see, we can go on and on, but we will limit ourselves to this list for now.

In order to correctly make a garden swing with your own hands, you first need to prepare a project and drawings of the future structure, based on the material that you have available. If you are thinking of making a metal garden swing, and there are not enough details, you can ask your neighbors, friends, or make them from another material, for example, wood.

Prepare a pencil (pen) eraser, ruler, paper, protractor. They will be needed not only for drawing, but also for the subsequent marking of parts. If you cannot immediately start drawing (you do not know where to start), then just sketch the drawing of the swing, "as you see it." It will be much easier to draw from the drawing.

Don't feel like you're wasting time drawing all the details. During the construction stage, you will have to refer to the drawing more than once.

The installation of supports can be carried out in different ways:

Install two vertical beams or pipes.
Dig in two large L.
Place two A-structures.
Mount supports like the letter X.

The photo shows various types of installation. As you can see, the crossbeams are also fixed in different ways. In addition to such fastening methods, for example, in the first photo, you can drill the posts at the top and install a metal pipe or a thick rod. An axle from a cart or trailer is used as it.

If you made racks from wide boards, you can drill them and install bearings in the holes. On both sides, close them with perforated sheets of metal, which are nailed onto the board. A rod must be inserted or pressed into the holes.

A more advanced method of securing the horizontal involves a special structure, mounted on poles, made by welding from three pieces of metal pipes.

There are several options for mounting supports:

Set on the ground or dig into it. Bad option. Due to the dampness, the end of the timber will rot and everything will fall to the ground.
Wrap the butt of the support with polyethylene or paint.
Concrete the support.
Install on a dedicated podium or terrace.

The second and third options are more acceptable. It is necessary to wrap the end so that the film comes out 20-50 cm. This will protect the bottom of the protruding part of the pillar from dampness in winter (in snowdrifts).The same must be done when filling the column with cement. The formwork must protrude from the ground.

To prevent children and especially adults (due to the greater weight) from falling, it is necessary to reliably hang the swing. To do this, you need to find:

strong enough ropes - you can use parachute slings (withstand 150 kg) or climbers' ropes;
chains - even those with which dogs are tied are suitable, but preferably thicker;
thick wire or long metal rods with a caliber of at least 10 mm.

Mounts can be completely different:

From the rope. Place the rope over the crossbar and fasten it to the bottom of the seat. Or pull it through the saddle and tie in a knot at the top.
Hook or ring.

The second method has several options:

The first two are designed to grip shaped crossbars: rectangular and round. They are a kind of clamps with hooks.

The last two are intended for fastening hooks or rings in the through hole of the crossbar.

Classic boards and semi-logs on a swing have long become boring to everyone.

Here are some unconventional methods for making swing seats. They are easy to make and not time consuming.

The easiest way is to use old chairs or benches made of any material that have broken legs. It is beautiful and practical. There are several ways to attach them to the swing:

We drill 4 holes in the seat of the chair (blue), pass the ropes through them and tie a rod or thin metal tube from below. He will not let the rope slip back.
We fasten or nail planks to the seat (yellow), drill them. We pass the ropes through the holes and tie large knots. For safety, such knots can be omitted in order to avoid their unraveling and passing through the hole. Better to just tie the end of the rope around the board.
Instead of holes in the seat, we cut out grooves and wrap a rope around the chair (pink). But the child can jump, the rope will come loose and slide to the side. To prevent the rope from jumping out, we fill the boards from below.

You can make a seat out of tarpaulin or fabric, but it is not very comfortable, since it wraps around the person sitting on both sides, squeezing him. For convenience, you can install a spacer over the seat on a rope or chain and then the degree of girth will decrease.

Make a pseudo-seat from a tire. Hang her up on ropes. In the sector facing the ground, stuff soft unnecessary things.

For convenience, take tires of a large size, for example, from the rear wheels of the tractor.

Hoop as a seat. A hula-hoop is taken and wrapped with ropes in diameter:

If this is difficult for you, you can put a ring in the center of the hoop and thread the ropes through it. First, set the small circle in the center and secure one cord so that the two ends are on the same side. Then reinforce the string on the opposite side. Etc.

To do this, use an old solid basin, tub, or even a trough.

But just sitting on wood, plastic or metal is not very pleasant. For more convenience, you can put on the seat cushions for a garden swing, made of foam rubber and covered with dense fabric or leather. If, during assembly, it is prudent to make soft seats, then no pillows are needed.

They represent a seat made of any suitable material, suspended from a branch with one or two ropes.

The photo shows that the ropes can be tied in different ways, the main thing is that they do not slip:

on the left side, two ropes are thrown over the branch and fixed at the bottom with four knots;
in the upper right picture, one rope is suspended from a hook;
on the lower one there are two ropes hanging from the hooks.

Make a swing entirely from wooden parts. That is, make the supports and the crossbar from beams or logs, and the seat from boards, slats or wooden benches and install as described above.

If you fill the foundation, fix a knocked down special shield, a podium and install a swing on it - it will be even better. After all, the supports and the shield do not touch the ground.Moreover, additional bars are installed between the shield and the foundation, providing ventilation of the shield.

We give drawings of two structures below.

As you can see, a wooden garden swing is not so difficult to perform.

Usually, a welded structure is made in the form of the letter P, on which the seat is suspended using hooks with clamps or through hooks.

Read also: Nokia 8800 DIY repair

It is made of pipes of at least 5 cm caliber. You can simply dig in or concrete two risers, insert an axle from a wide wheelbarrow or cart into the pre-drilled holes and stop it with fitted wheels.

A wire with a swing can be welded onto the axle, because the axle will rotate freely. For greater effect, you can install it on bearings, as indicated above.

To perform the second option, you need to weld something that resembles the roof of a house. Everything is clear from the drawing.

Constructions of this type can also be made from a profile. We'll warn you right away - not from plasterboard. That profile is very thin and may not be able to withstand a rocking person. It is designed for stationary loading.

The industry produces rectangular pipes, T-beams, I-beams. Here you can make a swing out of them. Their appearance is no different from the other structures described above.

The following options are more difficult to perform, because to implement them, you need to bend pipes or weld several pieces together.

A tried and tested method can be used to bend pipes:

the mandrel is being prepared;
the pipe is tightly clogged with sand and corks (wooden);
then carefully bend the future support along the mandrel.

These structures are distinguished by the fact that they can be easily carried or moved. True, this may require 2-4 people.

Usually, swinging structures involve a single, less often a double version. But now a 3-seater garden swing has come into vogue.

The installation of racks and suspension is identical to that described above, but the width is much larger.

To complete it, you need to make a special elongated seat that would accommodate three people, and install the racks at a distance of at least 2 m.

The seat can be made in two versions:

Classic - everyone sits facing in the same direction.
Modern - average rider, looking in the opposite direction.

Let's consider the first option. It is easy to execute. To make it, you can even hang a bench that can be seen in parks. But due to its heavy weight, this should not be done. Better to make the special seat yourself.

It can be made of aluminum pipes or wood. The following is the assembly procedure for the 3-seater seat. Its length is 1500 mm or more, the width and height of the backrest is 500-600 mm.

Thanks to our recommendations, you now know how to make a homemade garden swing for your family, friends and neighbors.

Join the group and you will be able to view images in full size

Remember the childhood sensations of a swing? This is not only pleasant, but also useful - monotonous swinging trains the vestibular apparatus, and also calms the nervous system. The second property is very useful in our time. Such a pleasant relaxation treatment after a busy day. Moreover, any person with "straight" hands can make a swing with their own hands. There are, of course, complex models, but there are many more simple ones.

Like most outbuildings, swings are most often made of wood. Racks and a crossbar - from a bar, logs, seats - from planks and even from parts of home furniture.

It is easy to make such a swing sofa with racks of logs on your own: quickly, cheaply, conveniently

A little about the designs. There are three main types of hanging swings, or as they are also called - boat swing, sofa, bench, etc. The main difference is in the type of support structure: there is an A-shaped and a U-shaped. You see an example with racks folded into a triangular structure above, and in the photo below an example with a U-shaped rack. It is more like a pergola with a suspended bench and it is built according to the same type, only taking into account the swinging loads.

There is a third type - this is already a complex structure that requires certain skills - it is based on articulated joints and they swing from resting their feet on the floor. Immediately we will give you a photo and a diagram for those who wish (you can expand it to full screen if you click on the arrows in the upper right corner of the picture).

Most often, they make a design in the form of the letter "A" on their own. It is simpler and requires less material. Let's take a closer look at the nodes, fasteners, talk about materials, protection against destruction and stability.

Immediately about what to make a wooden swing. The choice of lumber section depends on the planned load. If it is assumed that there will be one adult person, the racks and the upper crossbar are at least 50 * 70 mm. If a larger number of "seats" is expected - two or three, then the cross-section of the bar is at least 100 * 100 mm, in better case - 100 * 150 mm. It has been experimentally established that such a structure, when using a 100 * 100 bar, normally withstands a total load of about 200 kg. If you need more - take a larger section, or put logs))

About what the bench / sofa is made of. A bar of 70 * 40 mm will go to the frame, the backrest height is at least 600 mm, the seat depth is at least 480 mm. You can experiment with the depth of the seat and the angle of the backrest: there are options for the "recumbent" position. Accordingly, both the length of the sofa and the dimensions of the structure vary greatly from this. For fastening, use 200 nails or hairpins at least 10 mm in diameter.

A diagram with dimensions and a list of the required material in the photo below. To be honest, very few people make from such materials, as indicated in the specification. More often they put a bar.

There are varieties of this design: with or without a bottom frame. If the swing is installed on a rigid platform and the fasteners are made rigid, on the studs, without the possibility of backlash, then such a structure will stand without problems. If in doubt, you can make a screed from a bar along the bottom, nail it with pins to the coating, or drive the staples into the ground.

For those who are afraid of lateral loads - the structure in this axis is not the most reliable - we can offer the racks to be installed with a slope. The area will be large, but the stability will be high.

Racks with a slope will make the structure more stable

If it is intended to be installed in the ground, parts of the racks that will be buried must be treated with bio-protection. As a cheap option, put it in a container with used oil for several hours. Dry, then bury. They are buried to a depth of at least 50 cm, a little rubble is poured at the bottom, racks are set up and concreted. If you are afraid that this is not enough, attach several strips of metal crosswise at the bottom.The hole will have to be digged with a larger size, but the retention area will be larger.

Swing from a bar on the ground. Traces of concreting are visible

In all swings of this type - with the racks sawn at the top - the problem is the attachment point of the crossbeam, to which the bench is then attached. In the photo above, it is solved reliably, although not entirely aesthetically pleasing. The trouble is that aesthetic methods are difficult to execute. And, if you are not for sale, it is faster to do something inelegant, but reliable. So, in order to secure the cross-member, an overhead bar is attached below the intersection, pulled to the racks with pins. The crossbar rests on it, which is held from lateral shifts by racks and fasteners - nails and studs.

Another way to install the cross member is to attach the side posts in an “X” shape. With this option, the support beam fits perfectly. It is additionally fastened with nails, and the racks are pulled together with hairpins. See this option in the next photo.

Everything is fine, but the length of the sofa is not enough ...

By the same principle, do-it-yourself swings are assembled from logs: the side ones are fastened crosswise, and a support log is laid on top. If the timber is sometimes assembled on nails, then in the case of logs, studs are mainly used.

Swing on chains from a log

For those who are familiar with carpentry, there are more options: in a half-tree. Such a project in the photo gallery below with a close-up of some of the key nodes.

And several photos of different swings made on the basis of the A-shaped structure.

The attachment for the swing also requires clarification, that is, it is not obvious to everyone how to hang a bench-sofa on the crossbar. First, the crossbar is drilled from bottom to top through and through. A bolt is passed through the hole, to which an eye nut is attached. One or two wide washers are placed under the nut head so that it does not squeeze under the weight.

Instead of a regular nut, an eye nut is screwed onto a bolt passed through a hole in the crossbar.

It turns out that the ring of the eye nut is located at the bottom. You can attach a carabiner to it, throw a rope or cable, etc. Just pay attention that the carabiner should normally hang freely on the ring of the eye nut. And in the carabiner, two chain links should fit freely. Therefore, it is advisable to buy everything together in one store: you can try on the entire unit at once.

How the attachment is assembled from the chains for the swing. Then this carabiner is threaded into the eye-nut and the safety ring is twisted.

By the way, in a rigging store, you can stumble upon other devices that can be adapted to attach chains or ropes from the swing seat. For example, such as in the photo below.

More rigging options. They can also be used to make a swinging knot for attaching to the crossbar.

They are designed to lift loads from 0.5 tons, so there is no point in using them for children, but on a swing for adults - quite.

This mount has a significant drawback - a squeak is heard when rocking. For a while, you can get rid of it by lubricating the unit, but this operation will have to be repeated periodically. The way out is to make a knot on bearings, but welding is indispensable.

Their design is exactly the same. The material is different, and the method of its attachment. This is welding. Those familiar with welding inverters will find it easy to weld something like this. And for inspiration, a photo report.

Below is a drawing of this swing with dimensions. Some clarification is required. The figure shows a pipe welded around the perimeter (this plane is shaded). It is buried and therefore is not visible in the photo. It was made in order to increase stability: the masses of friends are considerable. For the same reason, metal plates are welded onto the ends of the posts. The installation was complicated, but the swing is still standing.

Drawing of a swing from a profile pipe with dimensions

For the manufacture it took 22 meters of a profile pipe 50 * 50 mm, for a seat 25 * 25 mm - 10 mm, boards 2000 * 120 * 18 - 7 pieces and the rest - fasteners, paint, anti-rust.

There is another way to attach the swing to the bar. He is in the photo.

A way to attach a metal swing to a crossbar

Nobody can explain how the author of the work is. How to make a swing with your own hands from metal, see the video.

The original form of a swing from a profile pipe - the posts are non-linear, but curved. If it is possible to do this with a tree, then only a master.