Do-it-yourself sofa repair eurobook

In detail: do-it-yourself eurobook sofa repair from a real master for the site my.housecope.com.

The problem is that 2 springs have broken in the sofa and a depression has formed in this place. Please tell me how to repair it yourself? His photos are attached below.
” >
” >
” >
” >
” >

Remove the trim (from below it is nailed with brackets) - they can be easily picked out with a screwdriver and pliers.
Remove under sheathing material.
Broken brackets are removed by twisting - this is how a key is removed from a metal ring. The brace is most likely attached to the bottom of the seat - either braces or curved studs.
Insert the new springs in the reverse order.
Replace the bedsores with any rags.

There is always someone better.

Gelo M, Thank you very much for your advice, but where should you go to buy springs?

Folding upholstered furniture is deservedly popular. It is an integral part of a modern living room, it can serve as an additional, and sometimes it is a permanent sleeping place. It is very important that the folding mechanism is light, reliable, and the product has a long service life. This type of furniture is the eurobook sofa.

When asked if a Eurobook sofa can be made by hand, the answer is unequivocal - yes. The transformation principle of this mechanism is very simple. It is designed for daily use. The Eurobook sofa consists of two soft parts: a seat and a backrest. To unfold, you need to push the seat towards you, then move the backrest to a horizontal position, taking the vacant space. As a result of the transformation, the sofa turns into a full double bed.

Video (click to play).

It is not very easy to create a Eurobook sofa. But if you yourself carefully study the drawings, diagrams, listen to the advice of specialists and coordinate actions with step-by-step instructions, you will certainly succeed.

To make a sofa eurobook, you will need (all parameters are in millimeters):

Pine timber 40x40 - 11 pieces, 2 m each.
1 laminated chipboard 16 mm thick - 2200x600.
1 chipboard - 1960x850.
2 sheets of plywood 4 mm thick - 1500x1500.
3 sheets of foam rubber with a thickness of 40 mm and 1 with a thickness of 20 mm - 200x100.
Self-tapping screws of various dimensions - 75, 51, 35.
4 screws M6 25 mm.
4 mortise nuts M6.
3 furniture hinges 60x40.
2 furniture legs 50 mm.
About 6 m of upholstery fabric 140 cm wide.
4.5 m padding polyester with a density of 100-150 g / m2.
Batting or foam rubber with a thickness of 10-20 mm for the upholstery of the seat and back of the sofa.
Furniture stapler, staples.
A circular saw.
Electric drill.
Miter box.
Sandpaper.
Stain.

Before proceeding with the assembly, cut all the blanks from the prepared materials.

14 pcs. 650 mm long (back and seat);
2 pcs. length 320 (seat legs);
4 things. length 598 (box);
4 things. length 235 (box legs);
1 PC. length 150 (box);
8 pcs. 160 each (back and seat);
2 pcs. 70 each (seat).

2 pcs. 1600x200 (drawer sides);
2 pcs. 598x220 (drawer sides);
1 PC. 1950x150 (seat).

1 PC. 1960x120 (tsar, this detail can be assembled from fragments);
1 PC. 1960x730 (sofa back);

From plywood sheets:

1 PC. 1300x730 (seat);
1 PC. 730x658 (seat);
1 PC. 1365x730 (back);
1 PC. 593x730 (back);
2 pcs. 800x630 (box);
2 pcs. 730x150 (seat end).

Below is an example of cutting out plywood parts. It will help you make the most of the material.

2 blanks 750x80 (sofa back and seat);
1 blank 2000x170x20 (tsar);
2 blanks 730x150x20 (seat ends);
3.5 m (total length) of 40x20 strips for the back ends.

The advantage of this model is the presence of a capacious box for linen. For this part, we take a bar, chipboard, the bottom is made of plywood.

Let's start assembling frames for the Eurobook sofa:

To make the frames, select the 4 best quality bars (1960 mm) for the longitudinal sections.
Reinforce 4 transverse bars (650 mm), which will be extreme in the structure, by attaching small blocks about 20 cm long to their ends (on one side) with self-tapping screws (70 mm).
It is necessary to make markings for 2 self-tapping screws in the attachment points of the parts that form the frame. We install short parts with a bar for reinforcement inward. We carry out the connection so far with only one self-tapping screw each joint, so that later we can align the angle of 90 degrees.
We apply plywood, align the corner along it so that the sides completely coincide. We fasten one side with self-tapping screws. After making sure that the frame is even and the short base bars are parallel to each other, we fix the plywood to the frame with self-tapping screws. For the reliability of the connection, it is advisable to grease all the necessary places in front of the self-tapping screws with joiner's glue.
We install 5 transverse bars on the back frame. The first one - stepping back from the extreme one by 195 mm (we will attach loops to it), the subsequent ones with a step of 392 mm.
On the other hand, we stuff fiberboard onto the future back.
On a similar frame of the sofa seat, we distribute the transverse strips (5 pieces) evenly over the entire area of the part (fiberboard is not needed on the seat). This difference between the backrest and seat frames is well demonstrated by the drawings.

If you are not using solid plywood, but pieces, then leave 1-2 mm free between the pieces. The joints should be additionally reinforced by placing a transverse strip on the seam. Secure the edges of both parts to it with screws.

For those who plan to use a decorative padding of the upholstery material when upholstering a sofa, now it is necessary to make holes for the padding (diamond or square). They should be drilled by installing a drill with a diameter of up to 13 mm. Immediately mark on the details where you are up and where you are down. On the back, step back from the top and sides of 23 cm, below -25 cm. Measure 25 cm from the back of the seat, and 23 cm from the front. Apply the remaining holes according to the selected scheme. Drill plywood and chipboard in the back. If you find yourself on a timber, it is better to indent.

Read also: Kenwood 700w DIY repair

At the next stage, legs are attached to the tsar with two self-tapping screws and a bolt with a nut, the height of which is equal to the height of the linen box. To decorate the sides of the product, plywood blanks are used, which in front are equal in width to the tsar, and in the back they are beveled to ensure the combined movement of the sofa folding mechanism. Fix them with self-tapping screws to the side of the seat base and the leg itself.This completes the production of 3 basic elements of the Eurobook. You can start covering with fabric and filling with soft material.

DIY upholstered furniture repair with before and after photos

In the conditions of using movable transformation mechanisms in sofas, their malfunctions occur most often. But this is not the only possible problem: the upholstery can be damaged by pets, the sofa sags over time, loose fasteners cause play in individual parts, and so on.

The main components of the sofa

And in order to understand how to repair a sofa, you need to understand its main units.

Sofa frame - main supporting structure

Sofa armrests with opening top

Variety of sofa filler options

Spring block for sofa

Upholstery fabric for sofa upholstery

This is how the transformation mechanism of the sofa looks like.

Wooden sofa frame

If there are problems with the body or armrests, the sofa needs to be repaired urgently to avoid further operational problems. When fixing broken wooden parts, we need the following materials and tools.

Joiner's furniture glue.
If necessary, paint and varnish.
Screed or profile.
Self-tapping screws and screwdriver.
A set of hexagons and furniture screws for them.
Emery cloth.
Clamps.
Drill and drill set.

An approximate set of tools for repairing and restoring a sofa

In the case of a chipped part of the armrest, it is worth collecting the fragments. Do not clean the chip under any circumstances!

Apply a layer of wood glue.
Attach the shard to the main part and secure with clamps through the bars.
Let the glue dry. On average 1 day.
Secure with a tie and self-tapping screws (not from the front part).
Sand the glued area with emery and sandpaper.
Apply paint and varnish.

In the repair of the main frame, it is better to replace the load-bearing boards with new ones, but you can also put support in non-critical cases. For this you need:

disassemble the sofa to access faults;
align the faulty plate and glue it with glue;
install bars (ties) on the back side for additional structural rigidity;
assemble the sofa.

Broken frame of a children's sofa requiring replacement of slats

Mix glue with sawdust for better adhesion and quick drying.
This mixture can also be used to fill holes for screws and bolts.

Pet owners know firsthand about coating problems. Also, replacement is carried out after severe contamination and obsolescence of the skin. Only the complexity of the conduct depends on the material, and not the process itself. But nevertheless, it is better to entrust the replacement of leather and leatherette to professionals.

Disassembled sofa for renovation work

Required tools and materials:

Construction stapler and staples.
Sewing kit.
Screwdriver and screwdriver.
Textile. Flock, velor, jacquard, chenille or tapestry are commonly used.

Flock is a soft, durable, durable material that is pleasant to the touch

Beautiful and expensive fabric for constriction - tapestry

Carefully disassemble the sofa into its component parts.
Remove the trim without damaging the fabric. It will serve as a template.
Cut out a new canvas, taking into account the peculiarities of the relief.
Stretch starting from the front, fixing with staples.
Repeat the procedure for all trimmed elements.

Do-it-yourself sofa repair - the process of tightening the armrests

New foam rubber for filling the sofa

The loss of elasticity and resilience is associated either with the spring block or with the filler. Also, the replacement of the filler must be carried out in connection with the appearance of unpleasant odors and the breakthrough of the upholstery from the inside.

Construction stapler and staples.
Screwdriver and screwdriver.
Filler.

Carefully disassemble the sofa into its component parts.
Remove the trim carefully.
Take out the old foam.
Install a new one with a total thickness of 35-40 mm.
Secure the filler with glue or staples.

Change the filler along with the upholstery. The total expenses for independent work will not exceed 3000 rubles.

Replacement of upholstery for an Italian sofa

Restoration of the spring block

A serviceable spring block determines the absence of subsidence of the sofa and its convenience. It consists of zigzag springs and is attached to the body in the form of arc-shaped brackets.

Materials and tools for repair.

Screwdriver and screwdriver.
Construction stapler and staples.

Disassemble the sofa into elements.
Detach the upholstery carefully.
Remove filler and backing.
Loosen the tension on the defective spring and replace it.
Reassemble in reverse order.

If many springs are malfunctioning, it is better to replace it with a whole block.
Replacing the elastic bands in the back is similar.

Furniture manufacturers are increasingly moving away from springs in favor of lamellas. The change process is the same.

Possible options for transforming sofas

A high-quality mechanism most often determines the cost of a sofa, since moving parts break faster. There are several types associated with the principle of operation. Each of them requires its own maintenance and problem fixing.

Set of wrenches.
Screwdriver and screwdrivers.
Machine oil or other lubricant.
Stapler and staples.
Drill and drill set.

Diagram of the transformation mechanism of the "Roll-out" sofa

The most common mechanism. The popularity is associated with the simplicity and low cost of execution. It was named so because of the principle of rolling out the section for the "bed" position. It also consists of rollers on an additional section, a slide with a fixing bracket on the body. There is also a lifting mechanism or an additional leg. Common problems are braking and squeaking when rolling out. It is solved by replacing the rollers and sleds. There is also a lack of complete fixation in the "bed" position. In this case, repair of the retaining bracket is required.

Diagram of the transformation mechanism of the "Book" sofa

It has been known since Soviet times and is already morally obsolete. In this regard, it is difficult to find accessories for the device. The sofa uses the front of the backrest as an additional section. The transformation takes place by folding the back and sitting together, removing the roller from the end position, rolling the roller and decomposing the sections. The most common problem is the inability to unfold or fold the sofa. In this case, do not use force.It is “treated” by disassembling the sofa, cleaning the guides, removing the tension from the fixing spring, lubricating the axle and fixing the jam or replacing the roller. In case of multiple problems with the mechanism, a complete replacement of the block is preferable.

The new variations use a rocker piece with springs. It is more reliable. But in the event of a malfunction, a complete change is required.

The scheme of the transformation mechanism of the sofa "Click-Klyak"

The most modern type for serial models of upholstered furniture. Has three positions. "Click Klyak" allows, in addition to the seat, to use the backrest and armrests as a sleeping surface. An interesting name is associated with the sound of transformation. Outwardly it looks like a book mechanism. However, it uses a special folding mechanism without rollers. Since the perfect fit of all moving parts of the device cannot be done at home, it is better to change the entire unit. To do this, it is necessary to disassemble the casing and filling and fix the breakage.

Diagram of the transformation mechanism of the sofa "Accordion"

Has three positions. Unfolding and fixing occurs due to movable axles and locks. For disassembly you only need a 10 spanner. The locks themselves look like a clamp without a tightening bolt. Frequent problems are similar to those of a sofa-book. All elements must be lubricated periodically.

DIY sofa repair process

Do not try to replace one mechanism with a completely different one. The use of different principles of work determines not only the difference in components, but also in the purpose of the elements.
Chipboard is more difficult to restore than wood.
If the support metal is bent, replace it immediately and do not try to straighten it. The structure of the metal will not withstand long loads and will deform again.
Frame play leads to breakage not only of the wooden parts, but also of the guide rollers. The friction generated also harms the upholstery.
Apply grease only to cleaned surfaces.
Do not overtighten the fasteners.
Hex keys must be of good quality. "Licked" edges will stop work for a long time.
WD-40 can be used to remove rust from moving parts.
Do not neglect installing washers on bolts and axles.
It is not necessary to make wood slabs or cladding yourself. It can be ordered in a furniture showroom.
The "licked" heads of the fasteners should not be rocked or tried to pull out the bolt. It is better to cut it off with a sheet of metal.
Monitor the condition of the pallet. This part of the frame is load-bearing and undergoes high loads.
Call a partner for all repairs. This will make your work easier and safer.

Do-it-yourself sofa after constriction

Almost every person in his life is faced with such a problem as a broken sofa that does not fold out. There are different options for breakdowns, then a description of breakdowns and ways to eliminate them will go.

The sofa seat collapsed.If the seat of the sofa has a sagging appearance and has lost its original shape, then this indicates that the inner filler has become unusable. What kind of inner filler can be in the sofa - it can be foam rubber (as the most common), a spring block, and a broken sofa frame can also serve as the reason for the failure (this is what the foam rubber or spring block is attached to)To find out the specific cause of the breakdown, it is necessary to detach the sofa trim from the frame and look inside. And what do we see there? You need to carefully analyze what caused the failure of your sofa. If this is squeezed foam rubber, then everything is simple here, measure the dimensions, thickness, length, width, and at any construction market or in a hardware store, buy the foam rubber you need and replace it.If the owner of the sofa is overweight, then the reason for the depression of the sofa can be the spring block, which is deformed and the springs broke from the weight of its owner.To eliminate such a breakdown, you need to purchase a new spring block and fix it in the attachment points.A broken frame is also a common breakdown of a sofa failure. It can be a broken beam, hardboard or plywood, which, due to weight or due to time, broke and fell through. How to fix such breakdowns is not as difficult as you might think. To do this, again, disassemble the sofa by separating the fabric from the frame, then remove the spring block, foam rubber and get to the frame. If the hardboard or plywood flooring is broken, then measure the width and length, purchase the required material in the construction market and fix a new piece of plywood with screws and glue. The simplest rule in furniture repair is that you don't have to invent anything, just change old parts for new ones.If the transformation mechanism does not work, you can simply lubricate it with lubricating oil, then fold and unfold the sofa several times.If your sofa won't fold out or fold.The most common cause of such a breakdown may be broken transformation mechanisms. What to do if a similar problem occurs. The simplest thing that can happen is the working out of the metal of the mechanism; to eliminate such a breakdown, household lubricating or machine oil will help. Just generously lubricate the friction points of the mechanisms and everything should fold and unfold. If it did not work out, then the second method is to replace the mechanisms with new ones, for this it is necessary to purchase similar transformation mechanisms and replace them. There is also such a breakdown when a break occurs at the points of attachment of the mechanism to the frame, that is, the attachment points (timber) breaks from the constant pushing of the sofa. the sofa is ready for use. The most important thing in sofa repair is to replace broken parts with new ones and that's it. In any sofa there is nothing supernatural and complex, every person who has hands and mind in harmony can easily repair any furniture.If the sofa battens are broken, you can simply swap them or glue them with PVA glue, holding them with clamps.with movable armrestswith movable armrestsThe sofa book "Click - Klyak", also known as "Click-Klak", consists of two identical sectional halves, a mattress, a cover, a folding mechanism and a linen compartment. There may be options with or without armrests. And also with side movable sections in the form of armrests that can be raised and lowered. Has three positions: "lying", "relax" and "sitting". The mattress in the Klik-Klyak sofa is often completed with a dependent spring block + foam rubber (PPU). Less often, only foam rubber - at the request of the buyer.The cover is made of various materials of different categories with a synthetic winterizer backing. Like the mattress, the cover is attached to the frame with Velcro. It can be removed and washed. Unfortunately, a 5kg washing machine does not fit. The metal frame (section) consists of a profile pipe 20 * 30 or 30 * 30 mm with attached wooden battens (lamellas) using plastic latoderazers.The sofa Klik-Klyak book is easy to use, but requires careful handling when folding and unfolding. To prepare it for the night - it is enough to raise the seat up to the characteristic clicks, then, holding the seat with your hands, lower it - and the sofa is unfolded. It is convenient when the room has an elongated shape. It must be remembered: do not allow "point" loads on the seats of the sofa. Otherwise, lamellae, lath holders may break.With daily use of the sofa, after about 5-7 years, the folding mechanism comes out: teeth are erased, riveted joints are loosened. Sometimes the rods bend in the mechanism. Unfortunately, when selling a sofa, sellers do not notify you where and how to lubricate the mechanism, how to avoid applying excessive force on the sofa when folding.The master arrives in a two hour time frame. The repair of the sofa book itself at your home will take no more than 1 hour. All types of locks, rollers and other consumables are always available. At the end of the work, he writes out a receipt, which indicates a guarantee of 3 months.