In detail: do-it-yourself accordion sofa repair from a real master for the site my.housecope.com.
VIDEO Today we are going to repair the folding / unfolding mechanism of the sofa. This breakdown occurred because the movable joints of this mechanism were out of order. This connection is a bushing with an ordinary washer, here it is riveted, tensioned by a spring.
In the second part, as you can see, he is no longer there.
That is why the sofa has stopped folding / unfolding with us. Well, this is all we are going to change now. To begin with, we will analyze this as you can see. It is quite easy to understand, because it is worn out.
Remove the tensioned spring and move on to a new set.
So, here we have an old set: bushing, spring, washer. As you can see, the washer is already worn out. The second washer was lost, when the mechanism flew out, it was lost.
And we will use these springs in a new set.
Now let's get down to assembly. So, we put this tensioner in the form of a spring and a washer on the bolt. And we put it all into the mechanism. Where it was originally.
Insert, don't forget about the washer. Tighten slightly with a nut. And we will definitely use a locknut. So that in the process of using it all this again does not start to fall apart.
It is advisable to tighten all this up. So that the locknut plays its role with us.
It drags on rather quickly.
On the right side, I installed everything a long time ago. You see, the spring is pulling and pulling this moving part.
And let's test it now. This is how the sofa folds up. And let's decompose it again. And our sofa can be easily expanded. So, we have repaired the mechanism. Everything works for us.
Video (click to play).
A sudden breakdown of the sofa transformation mechanisms can cause a lot of trouble for the owner. Squeaks, distortions, the inability to unfold and fold the sofa, sleep disturbances constantly remind us of the urgency of urgent repairs. You can, of course, contact the master and call a professional to fix everything, but often these breakdowns of the transformation of sofas can be corrected with your own hands. We will consider the main types of breakdowns and options for their solution in this article.
Today, furniture production has a large number of types and types of mechanisms. Below in the photo are only some of them (the most common):
The click-gag mechanism has three positions, one reclining and two for sitting. It is usually installed on modern lamella-type models.
Meralax is one of the reliable French clamshell layout mechanisms. Has an orthopedic effect in two versions - lamellar and metal weaving.
The dolphin mechanism is exactly the option that combines compactness and convenience. A seat is attached to the side parts of the frame, pulling the mechanism out of the niche "towards itself" to the upper horizontal position for the transverse bar and we get a full-fledged berth.
This is the simplest of all existing mechanisms. In high-quality performance, it is stable and durable, but, as a rule, the metal from which it is made leaves much to be desired.
Mechanism "accordion" - one of the most popular mechanisms for transforming sofas, has three positions of the layout.
One part is motionless, the other two have movable parts fixed with locks.
Now it is installed mainly on modern models of upholstered furniture.
The most common mechanism is installed on a sofa bed. It is quite simple to lay out and has a number of advantages over other models. The whole structure is made of thick metal and quality rivets.
You can also familiarize yourself with other types of sofa transformation mechanisms in the article Overview of sofa transformation mechanisms.
The models shown in the photo have their own individual characteristics. Here, not only the angle of inclination plays a role, affecting the lowering and lifting of the weight, but also the material from which they are made.
Many manufacturers use thin-walled metal and very low quality rivets for these mechanisms, because of this, furniture becomes unusable in a very short time.
If it is not possible to replace the broken mechanisms with new ones, you can make repairs at home. Of course, it is not always possible to do everything as it should, but it is quite possible to extend and give a "second" life to furniture.
So, what in these mechanisms can be repaired at home:
Replace battens, nets and lamellas.
Replace springs, rivets.
Strengthen the frame by welding.
Replace rollers.
Before proceeding with the repair, you need to determine the extent and cause of the breakdown. As a rule, it is mainly the rivets of the guide bar that are bolted to the frame of the sofa that break here. They fly out completely or a depletion appears, leading to an increase in the gaps.
For work we need tools:
Drill or screwdriver
Rivets
Hammer
Anvil or any other massive stand
It is necessary to rigidly fix the mechanism on the surface of the table, for example, with the help of clamps. We drill a broken rivet with a drill, starting with a small drill and gradually moving to the desired size.
To select the required drill diameter, measure the riveting size and thickness with a vernier caliper. We insert into the hole, with the hat down, and the part that will be riveted should look up.
If it is not possible to repair the mechanism with rivets, the bar can be fixed with a bolt and nut.
Here it is very important to choose the right length so that the bolt does not rest on the frame from the inside, because it will not be very convenient to cut it after installation!
This design has a number of small details that affect the correct layout of the sofa. Naturally, the repair will have its own difficulties, but with the right approach, this issue can also be resolved.
The figure shows the main elements of the "accordion" (its most vulnerable parts), since they are the ones that carry the main load.
After the expiration of the operating time, some of them require, at best, repair, and at worst - replacement.
The rollers must be replaced ... At home, you can change the polyurethane base of the wheel by choosing the desired size (height). Having drilled out the mounting axle, it can be replaced with a regular bolt with two nuts for better wheel fixation.
Due to their rigidity and strength, beech lamellas are almost impossible to break, although there are exceptions to the rule. Basically, the fasteners that "hold" the lamella break.
The photo shows that the lamella insert is attached to the metal frame with rivets.
In specialized stores, almost all furniture fittings are sold, including the "pockets" we need.
To replace them, we need a drill, with which we need to drill out the rivets. We check their width and thickness so that there are no unnecessary gaps.
Riveting can be done with smaller and larger hammers or with a riveting tool.
But the best option for installing the lamella holder is a regular bolt and nut.
Today the mechanisms "Click Klyak" in terms of the quality of operation leave much to be desired. Manufacturers do not pay much attention to strength, relying on a large area of the frame (the larger the area, the more stable the product).
The body bends in places of localization of weight, since it is made of sheet iron, from this the transformation lock itself breaks.
Making repairs at home can be very problematic; only a complete replacement is possible.
In order for the mechanism to serve for a long time, it is necessary to lubricate the rubbing joints in time.
They are shown with arrows in the figure below.
A common cause of breakdown and rapid failure of the mechanism is the fastening bolts tightened at the wrong time between the wooden frame and the mechanism.
During operation, large gaps appear, which lead to distortions and depletion.
The pull-out mechanism of the sofa is one of the most durable and reliable structures, but, as it turned out, it can become unusable in a very short time.
The reason for this fragility is in poor-quality layout elements, in particular, in the rollers. For reliable disassembly and assembly of the mechanism, the rollers must rotate easily and slide freely over the surface.
Watch a video of how a home craftsman changes the guide roller of a sofa with Dolphin mechanism:
VIDEO
In this article, only the main reasons and options for breakdowns of the transformation mechanisms of sofas were described, which, without special preparation, can be performed by almost any owner.
You should always remember what to produce overhaul only a trained specialist with the necessary set of tools will be able to lay out the sofa. He will always be able to accurately determine and eliminate the cause of the breakdown at a quality level.
Without proper experience, such a repair can lead to even greater malfunctions, therefore, if a problem is found, carefully study the cause of the breakdown of your favorite sofa, evaluate the complexity of the structure and your strength, as well as if you still decide to repair the mechanisms of the sofa with your own hands , be very responsible about the process itself.
DIY upholstered furniture repair with before and after photos
In the conditions of using movable transformation mechanisms in sofas, their malfunctions occur most often. But this is not the only possible problem: the upholstery can be damaged by pets, the sofa sags over time, loose fasteners cause play in individual parts, and so on.
The main components of the sofa
And in order to understand how to repair a sofa, you need to understand its main units.
Sofa frame - main supporting structure
Sofa armrests with opening top
Variety of sofa filler options
Spring block for sofa
Upholstery fabric for sofa upholstery
This is how the transformation mechanism of the sofa looks like.
Wooden sofa frame
If there are problems with the body or armrests, the sofa needs to be repaired urgently to avoid further operational problems. When fixing broken wooden parts, we need the following materials and tools.
Joiner's furniture glue.
If necessary, paint and varnish.
Screed or profile.
Self-tapping screws and screwdriver.
A set of hexagons and furniture screws for them.
Emery cloth.
Clamps.
Drill and drill set.
An approximate set of tools for repairing and restoring a sofa
In the case of a chipped part of the armrest, it is worth collecting the fragments. Do not clean the chip under any circumstances!
Apply a layer of wood glue.
Attach the shard to the main part and secure with clamps through the bars.
Let the glue dry. On average 1 day.
Secure with a tie and self-tapping screws (not from the front part).
Sand the glued area with emery and sandpaper.
Apply paint and varnish.
In the repair of the main frame, it is better to replace the load-bearing boards with new ones, but you can also put support in non-critical cases. For this you need:
disassemble the sofa to access faults;
align the faulty plate and glue it with glue;
install bars (ties) on the back side for additional structural rigidity;
assemble the sofa.
Broken frame of a children's sofa requiring replacement of slats
Mix glue with sawdust for better adhesion and quick drying.
This mixture can also be used to fill holes for screws and bolts.
Pet owners know firsthand about coating problems. Also, replacement is carried out after severe contamination and obsolescence of the skin. Only the complexity of the conduct depends on the material, and not the process itself. But nevertheless, it is better to entrust the replacement of leather and leatherette to professionals.
Disassembled sofa for renovation work
Required tools and materials:
Construction stapler and staples.
Sewing kit.
Screwdriver and screwdriver.
Textile. Flock, velor, jacquard, chenille or tapestry are commonly used.
Flock is a soft, durable, durable material that is pleasant to the touch
Beautiful and expensive fabric for constriction - tapestry
Carefully disassemble the sofa into its component parts.
Remove the trim without damaging the fabric. It will serve as a template.
Cut out a new canvas, taking into account the peculiarities of the relief.
Stretch starting from the front, fixing with staples.
Repeat the procedure for all trimmed elements.
Do-it-yourself sofa repair - the process of tightening the armrests
New foam rubber for filling the sofa
The loss of elasticity and resilience is associated either with the spring block or with the filler. Also, the replacement of the filler must be carried out in connection with the appearance of unpleasant odors and the breakthrough of the upholstery from the inside.
Construction stapler and staples.
Screwdriver and screwdriver.
Filler.
Carefully disassemble the sofa into its component parts.
Remove the trim carefully.
Take out the old foam.
Install a new one with a total thickness of 35-40 mm.
Secure the filler with glue or staples.
Change the filler along with the upholstery. The total expenses for independent work will not exceed 3000 rubles.
Replacement of upholstery for an Italian sofa
Restoration of the spring block
A serviceable spring block determines the absence of subsidence of the sofa and its convenience. It consists of zigzag springs and is attached to the body in the form of arc-shaped brackets.
Materials and tools for repair.
Screwdriver and screwdriver.
Construction stapler and staples.
Disassemble the sofa into elements.
Detach the upholstery carefully.
Remove filler and backing.
Loosen the tension on the defective spring and replace it.
Reassemble in reverse order.
If many springs are malfunctioning, it is better to replace it with a whole block.
Replacing the elastic bands in the back is similar.
Furniture manufacturers are increasingly moving away from springs in favor of lamellas. The change process is the same.
Possible options for transforming sofas
A high-quality mechanism most often determines the cost of a sofa, since moving parts break faster. There are several types associated with the principle of operation. Each of them requires its own maintenance and problem fixing.
Set of wrenches.
Screwdriver and screwdrivers.
Machine oil or other lubricant.
Stapler and staples.
Drill and drill set.
Diagram of the transformation mechanism of the "Roll-out" sofa
The most common mechanism. The popularity is associated with the simplicity and low cost of execution. It was named so because of the principle of rolling out the section for the "bed" position. It also consists of rollers on an additional section, a slide with a fixing bracket on the body. There is also a lifting mechanism or an additional leg. Common problems are braking and squeaking when rolling out. It is solved by replacing the rollers and sleds. There is also a lack of complete fixation in the "bed" position. In this case, repair of the retaining bracket is required.
Diagram of the transformation mechanism of the "Book" sofa
It has been known since Soviet times and is already morally obsolete. In this regard, it is difficult to find accessories for the device. The sofa uses the front of the backrest as an additional section. The transformation takes place by folding the back and sitting together, removing the roller from the end position, rolling the roller and decomposing the sections. The most common problem is the inability to unfold or fold the sofa.In this case, do not use force. It is “treated” by disassembling the sofa, cleaning the guides, removing the tension from the fixing spring, lubricating the axle and fixing the jam or replacing the roller. In case of multiple problems with the mechanism, a complete replacement of the block is preferable.
The new variations use a rocker piece with springs. It is more reliable. But in the event of a malfunction, a complete change is required.
The scheme of the transformation mechanism of the sofa "Click-Klyak"
The most modern type for serial models of upholstered furniture. Has three positions. "Click Klyak" allows, in addition to the seat, to use the backrest and armrests as a sleeping surface. An interesting name is associated with the sound of transformation. Outwardly it looks like a book mechanism. However, it uses a special folding mechanism without rollers. Since the perfect fit of all moving parts of the device cannot be done at home, it is better to change the entire unit. To do this, it is necessary to disassemble the casing and filling and fix the breakage.
Diagram of the transformation mechanism of the sofa "Accordion"
Has three positions. Unfolding and fixing occurs due to movable axles and locks. For disassembly you only need a 10 spanner. The locks themselves look like a clamp without a tightening bolt. Frequent problems are similar to those of a sofa-book. All elements must be lubricated periodically.
DIY sofa repair process
Do not try to replace one mechanism with a completely different one. The use of different principles of work determines not only the difference in components, but also in the purpose of the elements.
Chipboard is more difficult to restore than wood.
If the support metal is bent, replace it immediately and do not try to straighten it. The structure of the metal will not withstand long loads and will deform again.
Frame play leads to breakage not only of the wooden parts, but also of the guide rollers. The friction generated also harms the upholstery.
Apply grease only to cleaned surfaces.
Do not overtighten the fasteners.
Hex keys must be of good quality. "Licked" edges will stop work for a long time.
WD-40 can be used to remove rust from moving parts.
Do not neglect installing washers on bolts and axles.
It is not necessary to make wood slabs or cladding yourself. It can be ordered in a furniture showroom.
The "licked" heads of the fasteners should not be rocked or tried to pull out the bolt. It is better to cut it off with a sheet of metal.
Monitor the condition of the pallet. This part of the frame is load-bearing and undergoes high loads.
Call a partner for all repairs. This will make your work easier and safer.
Do-it-yourself sofa after constriction
VIDEO
It so happens that the sofa stops folding and unfolding. This usually happens when you are mobile.
Do-it-yourself repair of the accordion sofa mechanism at home is very simple. For this you will need.
Good afternoon. I have 2 sofas 5 years old with the Accordion layout system. Warranty for fittings and mechanism-5.
Do-it-yourself PBX lock installation. Repair of the sofa Accordion. High quality fittings and cheap spare parts.
Do-it-yourself PBX lock installation. Repair of the sofa Accordion. High quality fittings and cheap spare parts.
Unfortunately, the further assembly process could not be recorded, but I think that the main “moment is captured”. I will add.
The accordion sofa folds out according to the accordion principle. It is presented in 3 parts. If you lift the seat until it clicks, the mechanism will move forward and the sofa will unfold. To repair the accordion sofa mechanism with your own hands, you will need a new system. If the elements are bent, then the structure cannot be repaired.
To make an accordion sofa with your own hands, you will need a screwdriver, self-tapping screws, beams, beams, plywood, cardboard. A preliminary sketch of the future furniture is made. The next step involves making a frame.This requires 4 supports of the required length. Similarly, you can make a rectangular base, legs, crossbars and armrests. The parameters of these details depend on the preferences of each owner.
Instructions for assembling an accordion sofa.
When carrying out this work, special attention is paid to the strength of the structure. The joints must be treated with glue. To make a sofa accordion soft, you need to take care of its padding. For this, you can use foam rubber or synthetics. The upholstery material is laid taking into account the sketch made. The upholstery is fixed to the furniture frame with a stapler and staples.
The process of replacing the upholstery is done with screwdrivers, pliers, staplers, scissors, self-tapping screws, fabric. Repair of the accordion sofa is done with an assistant. Places of installation of certain elements are fixed on the camera. The armrests are initially disassembled. If they are combined with the legs, then a timber is placed under the base of the furniture. The sides are fixed with 2 bolts. To remove them, you will need to pull out the retractable structure. The next step involves dismantling the transformation mechanism. This will require a screwdriver and screwdriver. Then the rest of the furniture is dismantled.
Mechanism for folding and assembling the sofa accordion.
Self-replacement upholstery is done with a screwdriver. The metal elements are dismantled. The repair of the sofa continues after the examination of the mattress. If the product is in good condition, then the upholstery is replaced. To do this, you can sew a custom-made cover or upholster furniture with fabric by hand. In the 1st case, the cover is pulled over the sofa and fixed with a stapler with 10 mm staples.
To manually stretch the fabric, you will need to measure the width and length of each accordion sofa section. The material is cut with a margin. The fabric begins to be fastened from the front side, folding it in half. For this, staples are used. A similar process is being done on the other side. The material must be stretched as much as possible around the perimeter of the entire structure.
The next step is to cover the side elements and the center of the furniture with fabric. If the fabric is laid in the corners, then the excess is cut (wrapped) and sewn up. The staples should fit snugly into the furniture. Otherwise, they can damage the new upholstery. The assembly process is carried out upside-down.
Repair of the sofa provides for the replacement of foam rubber. To do this, you will need to remove the upholstery. Such work is carried out using furniture foam rubber, the density of which ranges from 35-40 mm. If the spring block has broken through the foam, then the springs are replaced. Burlap is cut to a specific size. It is laid on the block in 2 layers. Foam rubber is placed on top. It is fixed to the frame with staples, and to the burlap - with glue. Then a layer of padding polyester is laid. The fabric is pulled and fixed. Furniture is being assembled.
Repair of the accordion sofa provides for the installation of a new frame and transformation mechanism. The 2nd element is initially dismantled. Components must be lubricated with machine oil. Excessive stretching springs shorten.
As for the repair of the frame, this process involves the replacement of cracked or broken structural elements. Their parameters are pre-determined. You can buy the product ready-made in a hardware store. Otherwise, the elements are made to order in the carpentry shop. Parts are replaced, tightened and glued. When carrying out this process, it is recommended to pay special attention to the plywood located under the spring block. If it is poorly fixed, then the plywood is fastened with nails and glued with PVA. The dismantled elements are assembled.
VIDEO
Repair of the sofa involves replacing the spring block. Springs are of 2 types:
old (with a height of 20 cm, a diameter of 15 cm and a thickness of 5 mm);
modern (with a height of 12 cm, a diameter of 10 cm and a thickness of 2.2 mm).
The latter system involves the use of spirals. To replace them, you will need to dissolve the fixation of the spiral from the 1st end. Unscrew them with the other end. The spring is released from 2 sides and replaced. The new spiral is being assembled.
If several damaged elements are identified in the spring block, then a new system will need to be installed.
VIDEO
Otherwise, the rest of the spirals will start to fail.
The accordion sofa is the most common type of upholstered furniture. Consists of three sections. Has only two positions: "lying" and "sitting". Internal filling consists of a spring block attached to a wooden frame + polyurethane foam (foam rubber). It also occurs - only foam rubber + plywood frame. The cover is attached to a wooden frame with metal staples and cannot be removed simply by hand.
It is easy to use and does not require constant maintenance. To prepare it for an overnight stay - just pull the "foot" seat towards you and hold the sections with your hands, then you need to "bend" the leg section to a characteristic click and lower it - the sofa is unfolded. To fold the sofa - it is necessary to lift the “leg” section up until a characteristic click, holding the seat with your hands, with forward movements downward, lower the section - and the sofa is assembled. It is convenient when the room is square.
Most often, folding mechanisms break down in accordion sofas. Unfortunately, when selling a sofa, the sellers do not notify you that it is necessary to lubricate the folding mechanism and after 5-7 years of daily use, there are scuffs in the friction points of the mating parts, jamming of the locking pin in the mechanism. If, after lubricating the rubbing surfaces in the folding mechanism, the locking pin does not start to jump, you will need to replace both sofa mechanisms with new ones. If you make too much effort in an attempt to fold an accordion sofa with a jammed mechanism, it can lead either to deformation of the mechanism itself, or to breakage of the wooden frame of the sofa.
Rollers break a little less often. This part suffers from excessive loads: during movement it encounters obstacles: the edge of the carpet, debris, overloading with heavy objects in the laundry compartment drawer. A broken roller can ruin the flooring and complicate the folding and unfolding of the accordion sofa. This breakage will also lead to deformation of the folding mechanism during assembly. There is also a high probability of breakage of the wooden frame elements.
We remind you: in order to preserve the working capacity of the folding mechanism for a long time, it is necessary to lubricate with aerosol grease in the area of the retaining pin and the spring twice a year (in spring and autumn).
An attempt to make a do-it-yourself sofa repair can not always be crowned with success.
The table lists the most common possible malfunctions and methods of elimination. If you haven't found an answer to your problem, don't panic. Call us - we will definitely help. All breakdowns and defects are simply impossible to post on the site.
When choosing upholstered furniture, we are guided by different principles. Someone needs a large sofa complex for the living room, someone is looking for a convenient option for a small apartment. Modern models of folding furniture are quite diverse. But, the classic sofa system with accordion mechanism remains relevant and one of the most demanded on the market.
A fold-out sofa is quite a practical thing. When assembled, it takes up a minimum of space in the interior, and when unfolded it has all the advantages of a full-fledged berth. The accordion model is extremely easy to use. The three-stage layout is so elementary that it is even accessible to children. The swivel mechanism of the accordion sofa unfolds by simply lifting and pulling the canvas forward.
The design has three parts. These are blocks connected in series. The first two make up a sleeping place, which, when folded down, turns into a sofa back.The third part, when folded, is a seat, and when unfolded, it complements the length of the bed. The total length can be about 2 meters, which allows people with tall stature to fit comfortably on such a sofa bed. Reviews about the accordion mechanism for the sofa are different, and they depend on the preferences of the buyers.
You can learn more about the mechanism's operation by watching the video:
VIDEO
The front shelf and legs are equipped with rubber casters. This prevents scratches and damage to linoleum or laminate flooring.
The design includes a spacious storage box for bedding.
The transformation into a bed does not require moving the structure, since it can only be expanded forward.
There are models with additional shelves built into the armrests.
Folding requires considerable physical effort.
Damage to the inner arm prevents the sofa from folding.
The thick backrest when folded does not look quite harmonious.
The fastening system makes it easy to change the position of the sofa. It acts on the principle of folding or stretching the bellows of a musical instrument (accordion or accordion). The accordion sofa mechanism consists of a frame and three canvases that serve as a bed.
The frame of the sofa is made of a steel profile or a thin-walled metal tube. This gives the product sufficient strength for long-term use. There are also models with a frame entirely made of wood. The bed is formed by wooden planks - lamellas or battens, fixed in the frame. They are located close enough to each other, which gives the sleeping place the necessary orthopedic rigidity. The stock can also be made of metal mesh. The frames are fastened together with a special locking mechanism ATC or BZ, which are responsible for the function of folding and assembling the sofa.
Bed in unfolded position
The range of accordion folding sofas is presented in three constructive versions:
Straight sofa, with a classic sweep. Such models are suitable for rooms with limited space.
Corner sofa, with a fixed corner section. It is preferable to put it in the living room. The number of seating and sleeping places for such a design is the largest.
Chair-bed. Usually placed in a nursery, as it is designed for one person. Also, one or two armchairs can complement a straight sofa, creating a full-fledged soft furniture set.
When choosing a sofa, be sure to pay attention to the type of mattress. Its thickness can be from 6 to 12 cm. Mattresses are fixed on the frame with ties, adhesive tapes, laces, etc. The constructive solution implies the use of two types.
Modern materials polyurethane foam and memoriform take the shape of the human body and "remember" it. After loading, these surfaces easily return to their original shape, therefore, dents do not form on the sofa during use. The material is environmentally friendly, hypoallergenic, absorbs moisture well enough. The different hardness of this covering makes it possible to choose a mattress with the degree of elasticity you need.
Such a block can be of several types:
Classic one-piece. Consists of a solid spring leaf covered with polyurethane foam. There are also reinforced blocks, the additional rigidity of which is given by vertical inserts made of polyurethane foam.
Independent. This type uses barrel springs, each of which is autonomously housed in a separate pocket. It is made of a special material - breathable spunbond. The more springs in the block, the higher its orthopedic properties.
The orthopedic qualities of the mattress are due to its rigidity and ability to maintain the natural position of the spine. The best properties in this regard are possessed by mattresses with an elastic covering and a block with a large number of independent springs.
Covers that protect the mattress from dirt can be removable or non-removable.For their manufacture, they use natural leather, synthetic eco-leather, tapestry, flock - there are many different modern materials.
INTERESTING! The advantage when choosing is obvious - it is worth buying a model with a removable cover. It can be washed or dry cleaned. It is also quite easy to replace such a coating if it is damaged.
Like anything, an accordion sofa can get damaged. What to do if the lock or other part of the structure is broken? To fix a breakdown, you can invite specialists, or make repairs yourself, with your own hands. What structural elements most often fail? Here they are:
Frame.
Frame attachment hinges.
Lamellas and their mountings.
Wheels.
Locking mechanism.
Hinges, lamellas and wheels can be easily replaced, since there is now a very wide selection of furniture fittings in stores. The new rollers are secured with a conventional bolt connection. The lamellas are replaced with rivets, after drilling new holes. Frame breakage requires specialist intervention. With experience, welding can be used to repair a broken seam in a metal frame.
Fastener breakage is a more difficult problem. The possibility of repairing it depends on the nature of the damage. If the spring screw has popped out, you can replace it by purchasing a new kit from the store. Strong deformation of the tool joint requires its replacement.
To change the folding mechanism yourself, you need to do the following:
Step 1. Remove the mattresses from the frame.
Step 2.Use a screwdriver to unscrew the broken part.
IMPORTANT! When dismantling the lock, all frames must be held in order to avoid breakage or deformation.
Step 3. Install a new lock connection, securing it with screws slightly larger than the previous ones.
Comfortable and easy-to-use accordion sofa will last a long time. Ease of assembly and small size keep this model at the top of the consumer demand.
Quite a lot of designs of transforming sofas have been invented. One of the most popular is the "accordion". Making such a model is within the power of a home craftsman, because in this case, complex metal elements, which are, for example, a classic "book", are not required. To assemble a sofa accordion with your own hands, you can make drawings and diagrams yourself, taking into account the peculiarities of your own apartment. You will learn about this from our article.
Buyers are attracted by the mechanism of the sofa "accordion" - the scheme is elementary. The upper part consists of three elements. When the sofa is unfolded, it is a mattress. When folded in two parts you get a backrest, from one - a seat.
Such furniture has a lot of advantages:
compactness;
reliability;
mobility;
light weight;
simple transformation.
Important! The accordion sofa takes up little space, so it's just perfect for small apartments. It can stand close to the wall, there is no free gap, which allows you to save a certain amount of square centimeters, and at the same time get rid of the dust that inevitably accumulates in the cracks. When installing, the most important thing is to take into account how much space the unfolded sofa takes.
Since the assembly diagram is simple, there is nothing to break in it. Such sofas can stand for decades and begin to crumble just from old age. But in this case, it is quite easy to replace individual parts. As a rule, it is necessary to change the upholstery, soft filler, guides or casters.
Even a child can handle the transformation. No physical effort is needed for this. It is enough to pull the loop, and the bed is ready, and with a flat mattress. If you wish, you can make a box for linen.
Before assembling a sofa accordion, there are a few things to do:
imagine how it will look;
find an assembly diagram or make it yourself;
select suitable materials;
make sure the tools are in the right place at the right time.
back to content ↑
When deciding how to make an accordion sofa yourself, first select a model and scheme. There are several options:
This model has a metal frame and a storage box for linen and pillows. The armrests can be rearranged - for example, they can be used as pillow supports. Soft parts and covers can be removed without any effort.
This model is often made without armrests at all. It is very lightweight and compact. When folded, it is a cross between an armchair and a sofa, but easily turns into a fairly spacious and comfortable bed.
The most classic "accordion" made of chipboard. The industry produces these models in different sizes, but you can offer your own version that suits your room. It is easy to assemble and disassemble, and it is the easiest way to do it yourself.
As for the materials, then, regardless of the model chosen, you will need:
bars with a section of 50x25 mm,
Fiberboard 4 mm;
plywood 10 mm
upholstery fabric;
foam rubber;
three-piece mattress;
guides and wheels (for the part that will slide out);
fasteners (staples, nails, screws);
legs for the stationary part;
construction glue;
transformation mechanism;
support hinges.
Important! Support hinges, wheels and a transformation mechanism can be bought at a furniture accessories store or ordered online.
The simplest tools are needed, which are always in the home master's box:
In addition, you need a small free space for an impromptu workshop, as well as a table. A room of 10 sq.m. is quite enough for you.
Important! Plywood and fiberboard can be replaced with other materials if desired.
Instructions on how to assemble a sofa accordion, the assembly diagram depend on your idea. That is, before you start making, you need to sketch out a sketch. You can easily find the necessary drawings on the Internet - you just have to substitute your dimensions. First, decide what the soft part will be based on:
on a metal frame with lamellas;
on a frame made of timber.
The metal frame is made from a round or rectangular tube. This makes the construction somewhat heavier. To make such a frame you need:
metal pipe;
slats;
lat holder;
fasteners;
pipe bender;
welding machine.
Not everyone has the opportunity to work with metal, so the overwhelming majority of home craftsmen choose the option with a wooden frame, it is much simpler and lighter.
Important! For this option, it is necessary to calculate the fastening step very accurately.
Any transformer consists of several parts. Before you fold the accordion sofa, you have to make the individual elements:
padded part of three sections (seat, back of the back and front of the back);
two armrests (soft, straight);
stiffener (for connecting two sidewalls);
box on wheels;
drawer guides.
If you yourself took up the sketch, solve a few questions for yourself:
what will be the height of the back;
do you need a box;
whether soft armrests are needed or can they be made rigid.
The choice of materials depends on this. The back can be high, but in some structures it is just a stiffener. The armrests are not necessarily made straight - their shape can be curly, but this will require additional effort and some skill.
After that, you need to make drawings:
In the sketch, fill in all the dimensions.
Imagine what the unfolded surface of each part looks like.
Draw up drawings to full size or to scale according to the dimensions you have specified.
Add additional details to the drawing of each element.
Important! The height of the transformation mechanism must be carefully considered - it must correspond to the thickness of the mattress.
All details must be done strictly according to the drawings. Perhaps the best place to start is with the armrests - you can also practice using the tool at the same time.It should be remembered that they must be absolutely symmetrical. The only difference is where the assembly bolt is directed.
The main part of the sofa is the frame to which the armrests and the soft part are attached. The work is best done in this order:
Assemble a frame from four strips of plywood (top, bottom, front and back walls, and seven blocks).
Place the last seventh bar close to the back wall.
Drill a hole in it for the mounting bolts.
Install and fix the bolts on the side of the head with 5-10 mm thick wooden plates.
Top the frame with fiberboard.
Cover the structure with foam rubber (do not forget to leave an allowance of 0.5 cm).
Wrap it all up with fabric (cut allowances should be at least 5 cm on each side).
Make the sidewalls.
Drill bolt holes in the inner sides.
Cover them with foam rubber.
Install the sidewalls, securing them at the corners with self-tapping screws.
Sheathe the frame on top with fiberboard sheets.
First you need to make separate frames of all three parts from fiberboard:
Lay the back and front frames side by side.
Screw the bars to the touching bars from the inside next to the corners - it is better to do this with self-tapping screws.
Mark and drill the mounting holes - hinges will be placed in them.
Cover the fiberboard sheets with foam rubber - its thickness is about 10 mm, but you can take thinner sheets by gluing them in several layers.
Mark the holes for the transformation mechanism - they are located on the sides of the seat and the front of the back.
Drill holes.
Cover the frames with fabric (you can paste over with padding polyester and make covers).
The bed box is made of boards:
Prepare 4 boards of the same thickness, the length and width correspond to the dimensions in the drawing.
Assemble the box by connecting the boards at the corners of the future box with vertical bars.
Measure the diagonals of the box - they should be equal.
Secure the stiffener - it is in the middle.
Attach the fiberboard bottom (with small screws).
Screw the wheels in the corners.
Mark the holes for the transformation mechanism.
Make a front panel - cover it with a cloth and attach it to the front of the drawer.
Connect 2 guides to each other, along which the wheels will move - this is done with the help of two boards.
Check how parallel the guides are.
Cover the rear stiffener with a cloth.
Important! When the sofa is assembled, the ends of the boards that connect the guides should be in the middle of the bottom of the armrests.
Are all the details ready? Fine! The time has come to assemble the sofa and evaluate the results of your work:
Press the back and front of the backrest together.
Secure them with loops.
Fix the hinges with self-tapping screws.
Connect the front parts of the backrest and the seat with a transformation mechanism (it is bolted).
Flip the finished soft part upside down.
Place the box on top.
Attach the box to the transformation mechanism.
Attach the crossbars between the guides to the lower parts of the armrests with self-tapping screws.
Turn the sofa over without attaching the armrests yet.
Fold up the structure.
Roll your creation onto the guides.
Embed the bolts that protrude from the armrests in the back of the back.
Attach stiffeners to the back walls of the armrests.
Important! You can make triangular overlays that will close the gaps between the back and front of the back.
VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
Video (click to play).
As you can see, it is quite possible to make a sofa accordion with your own hands. Drawings and diagrams can be adjusted to the desired dimensions without problems, and with the correct preparation of all parts, assembly will take only a couple of hours. And the new furniture is reliable and safe, ready to decorate your apartment.
