DIY home renovation cheap and beautiful walls

Few people have the opportunity to order turnkey renovations and spend large sums on finishing the apartment. Fortunately, today there are many ways to save money on renovation repairs by doing it yourself. In this article, we have selected the best recommendations for those who want to make inexpensive but high-quality repairs at home.

The budgetary renovation mainly includes finishing works, ceiling and floor renovation. If the estimate allows, windows, interior doors, and plumbing elements are also subject to replacement. It is not recommended to make major changes in the space of the apartment in the mode of saving money. Such work should be carried out by professional craftsmen with experience in repair work, otherwise there is a risk of spoiling the appearance of the room, making mistakes in calculations or running into low-quality building materials.

How to make an inexpensive DIY repair? First you need to determine what work will need to be done in the process. The standard stages of a budget room decoration are as follows:

• Drawing up a work plan and estimates based on your budget;
• Selection of building materials;
• Preparing the room for renovation work;
• Rough wall decoration and floor filling (if work is being carried out in a new apartment);
• Wallpaper gluing, flooring installation, ceiling decoration;
• Arrangement of furniture, lamps, decor elements.

As you can see, all these works can be done independently, with a little skills in the field of construction and repair.

Following the instructions above, repairs should begin with an estimate and selection of suitable building materials. An estimate should be drawn up sequentially for the decoration of each room and for a specific type of work. You should not buy materials with the hope that they will someday come in handy - you should proceed solely from the repair plan and budget.

The first stage of the renovation also includes the release of the future room from furniture, decor elements and part of the decoration. Nothing should remain in the room that will interfere underfoot or deteriorate during repairs. If old wallpaper hangs in the room, it is necessary to remove them and carry out preparatory measures for finishing the walls, the same applies to the floor and ceilings.

When purchasing building materials, do not limit yourself to visiting one store - you should take into account all the inexpensive centers in your city. The assortment in them can be strikingly different, as well as the prices for the same type of product. Of course, in case of budget repairs, it is better to turn to the most advantageous offers. You can greatly facilitate your task and save money by ordering building materials in online stores with delivery.

When choosing budget building materials, it is worth remembering one rule: what looks expensive is not always of high quality. You shouldn't buy cheap materials that imitate wood, stone or tiles just because of their appearance. It is imperative to pay attention to the technical and operational characteristics of the goods.

The decoration in different rooms of the house has its own characteristics. Therefore, before starting the repair, you need to decide which rooms are in particular need of updating the appearance. In the living room, bedroom, nursery and hallway, do-it-yourself inexpensive repairs can include the following types of work:

• Plaster and wall plaster;
• Pasting new wallpapers;
• Wall painting;
• Assembly or installation of flooring;
• Ceiling decoration.

In the kitchen and in the bathroom, finishing work also includes:

• Floor and wall decoration with ceramic tiles;
• Surface treatment with water-repellent compounds.

Here we have listed those types of repair activities that you can carry out on your own, having some skills in the field of construction. However, it is often necessary to do such work indoors, which should be handed over to professional craftsmen:

• installation of suspended ceilings;
• replacement of plastic windows;
• repair of electrical and plumbing.

Although the listed works cannot be classified as economical (due to the use of additional labor and building materials), if necessary, they can also be carried out as part of inexpensive repairs.

In addition to giving up complex installation work and saving on building materials, there are other tricks that will help reduce the cost of repairing an apartment. At the same time, the decoration and the interior will have an excellent appearance.

Still think that a budget do-it-yourself finishing option cannot look stylish and expensive? In our gallery, we have selected photos of inexpensive repairs, which convincingly prove the opposite.

If you want to better understand how to make inexpensive repairs in an apartment in practice, we suggest watching a video with the process of finishing work on a real object.

Making repairs on a limited budget with your own hands is quite difficult, but doable. The main thing is not to be afraid of bold decisions, to use modern and high-quality materials, to act according to the plan. And thanks to the tips listed above, you can reduce the estimate for expensive repairs.

1. A good mine with a bad game.

Silk made from 100% polyester. Tiles “like stone”, linoleum “like parquet”, laminate “like onyx”, “Trekhgorka” like Ralph Lauren. Porcelain stoneware "python". There is something "artificially aged" ... It's embarrassing to even think about it. Alas, the number will not work. Flip through good interior magazines. There, everywhere, stone is stone, tiles are nothing more than tiles, and wood is just that tree. If you don't have the money for parquet, and plain laminate is beneath your dignity, look for a good engineered plank. The result is a floor that looks much more expensive than the money spent on it. Cement tiles are a good alternative to porcelain stoneware for kitchens, bathrooms and hallways. The result will look a hundredfold more expensive.

2. Leave the ceiling alone.

Everyone has become obsessed with ceilings! If you think sensibly, riveting attention to the ceiling, you only remind everyone of its existence. And according to its height. Ceilings two-sixty high will not turn, even if they crack, into majestic vaults melting somewhere in the unthinkable heights. This cannot be, no matter what "decorator's tricks" promise you. Just accept it. Tall doorways can do much more for your home than a ridiculous five-layer neon-lit ceiling. Let the interior doors be two, say, twenty high. And lower the door handles a little, by five to seven centimeters. By taking a non-standard approach, you will be pleasantly surprised by the result.

3. When choosing paint for walls, think about the movement of color around the house.

Adjacent spaces should contrast. If you have a bright living room, paint the hallway a deep, relatively dark color. The cost of the paint will be the same anyway, and the result can look really expensive.

4. Buy modular laminate cabinets from a store, and order the doors for them in a good carpentry workshop.

This will give you significant savings that, however, no one will ever notice. The same is true for kitchen furnishings.

5. If you do purchase ready-made cabinet furniture, let the veneering of the facades be dark and the panels of the doors simple (rectangular).

Remember, light wood always looks cheaper. Avoid yellowish and reddish veneers. And, saving on the furniture itself, spend on good handles!

6.If you don't have the money for a good rug, look for a viscose rug. or mixed fibers, imitating a silk or wool pile carpet.

Choose the color and texture that suits you and order a piece of the size you need. For additional little money, its edges are swept with braid.

7. Place the curtains on a thick lining.

Even an inexpensive curtain fabric will greatly benefit from this. Look for fabrics that are 3 meters wide. This provides significant savings. If you are not ready to spend a lot, give up printed textiles (fabrics with a pattern). When cutting fabrics with a pattern, due to the need to properly dock the canvases, a lot of scraps remain. The more rapport, the more waste. Do not use curtain tapes for curtains. Have the seamstress fold in the "hand" folds. It's not that expensive, and the lace-up pleats look very cheap.

8. Set-headset-kit. Identical things in the interior are permissible only in one case: if they are paired things that form a symmetrical composition. Leave chandeliers, table lamps and sconces from one set to those to whom God did not give imagination. They also get sets of upholstered furniture "sofa-two armchairs" and similar tender sadness. For details, see the next paragraph.

9. Ready-made solutions.

Bad news: none. At least for us. The shower room is erected in a building way because it is a room. If you don't run a student hostel or an underground striptease massage parlor, a shower cubicle (it's a sad structure of yellow acrylic and skewed doors) won't work for you. Don't splurge on designer plumbing. Let the appearance of the bathroom fittings (kitchen, bathroom) be dictated by the function. Buy washbasins and faucets with simple shapes, without inappropriate decor. The toilet should be invisible and do its job. Nobody will admire him, right?

10. Paintings, prints, prints, photographs and posters frame in simple but deep frames with glass and always in mat.

Even a picture printed on a home inkjet printer (or a naive child's drawing) looks very significant in such a frame. Play with the dimensions of the mat. Small work in a very wide mat looks very "designer". And by the way, cardboard for a mat can be of almost any color.

11. Comfort. Another collective fetish.

According to my observations, what is called "comfort" in our Palestinians is, in 99 percent of cases, poetic tightness. In many ways, this is a bodily memory of a bygone childhood, of a warm and affectionate meager Soviet life with carpets teeming with saprophytes, a kind grandmother, Czechoslovakian crystal and an unreadable Dreiser in the polished Polish wall "Hanka". All the more comfort will not be added by the expensive devilry such as a round bed with music and a minibar, a bar counter with a built-in aquarium, etc. The same is true of such rich things as a lambrequin, a garland and a swag. Do not worry: in a good, thoughtful interior, comfort inevitably comes naturally. So…

12.… Goodbye, Sera the gypsy!

Duvet covers made of coarse calico in fine Nefertiti, towels in scarlet roses, "ripped-eyed" shades of pillow cases, nylon blankets with Shanghai leopards. All these are attributes of collective farm chic, forgive me for being straightforward. They will not add comfort. Coloring is often necessary for these items solely to hide their extremely lousy quality. Keep linens and bath towels just white (options: ivory, ecru). But from the finest Egyptian cotton.

13. However, with ivory it is also important not to overdo it.

Peach, beige, sand ... The average nuance is good for chain hotels. Because their stenciled interiors are bound to please everyone. You should like your interior. After all, he is a manifestation of your essence, right? Take in your hand the palette fan of any paint manufacturer.Do you feel a pleasant weight? These are your opportunities. Don't miss them!

Do not believe that it is possible to make repairs in a private house at an inexpensive price? Have you phoned all the ads, walked through the construction bases and even looked at the objects that had not yet been put into operation - and everywhere they called you astronomical sums? Yes, that's the way it should be. But did you know that this figure can be at least halved? All you need to do is roll up your sleeves and use the finishing technologies we have indicated. Believe me, it is not the gods who burn the pots - this is what Forumstroika readers do.

Well, so how to make repairs in a private house in an inexpensive and beautiful way? - This question was probably asked by everyone, regardless of social status, income level, and even the presence of their own housing. Firstly, the tenants also want to live beautifully, and secondly, having learned how to implement decent design projects for a penny, you can make good money by helping others with the arrangement of housing. After all, saving is the same profit.

A cursory glance at such a problem, any more or less experienced financier will notice that the solution of any desired production process requires three mandatory components: Time, Labor and Capital... And a decrease in any of these indicators automatically leads to an increase in the other two. Therefore, by cutting the budget, we agree by default with the fact that we will have to work ourselves, and finishing work will take a little longer. Well, what to do? You always have to sacrifice something.

If you are planning to make a beautiful renovation in your private house, then the first thing you have to decide on is the interior style. Since we are running out of money, and the services of a designer can pull up to 20% of the estimated cost of the project, we will have to do without them. As a result, goodbye to original author's ideas from Fedor Arzamanov or Olga Amlinskaya. Greetings to you, Google and Yandex search. If you ask the right questions, you will find on the web thousands of photos with solutions from the best designers in the world, which can be creatively processed to create an interior for yourself.

We only advise you to immediately abandon conservative classical and neoclassical styles, minimalism and hi-tech that are popular today, and, perhaps, extravagant avant-garde. The latter, although it will be cheaper than the above-named neighbors on the list, but it will require you to have specialized education. Combining incompatible on a whim, it is very easy to screw up the sides.

Better pay attention to such "rural" designs as Provence, chalet, rustic, as well as Scandinavian style. All of them involve the use of relatively inexpensive natural materials, and simple, even somewhat rough furniture. If such repairs were available even to the inhabitants of the rural outback, it will not ruin you either.

Also take a close look at the loft. In terms of renovation, it is economical, but is only suitable for finishing spacious, preferably studio premises. House 4 × 5 meters not under the "attic" scope.

But a designer's job is not limited to creating a beautiful drawing. To transfer a masterpiece from the canvas to the three-dimensional plane of the brick walls, you also need to select suitable building materials and technologies for their application. Let's start analyzing the situation from the ceiling and gradually move towards the floor.

Don't laugh, but it is stretch ceilings that top the list of the most affordable floor finishes today. So what? There is no need to make a complex metal frame for them, they do not need a finishing finish, and the cost of the PVC canvas itself, with the arrival of a Chinese manufacturer on the market, you will not particularly scare anyone. You will have to pay only for the film and for its installation. This is where the main problem lies. We agreed to do the repairs ourselves!

At the same time, working with stretch ceilings requires the use of a heat gun, which probably does not gather dust somewhere in your closet, and buying such an expensive inventory at once is irrational.

We also pass by and near the popular today rack ceilings, although a child will probably cope with their installation. But cheap plastic panels are short-lived and not environmentally friendly - these cannot be recommended for use in living rooms. This product is the maximum for a bath or toilet.

A lot today costs at the exit and plasterboard ceiling. Especially if the project involves the manufacture of a two or three-level frame for it. But in the meantime, this type of finish will suit you perfectly. The fact is that the materials themselves for its manufacture, and these are metal profiles, gypsum panels and gypsum mixtures are quite affordable, and the customer pays for installation and painting work. If you are ready to do them yourself, the savings will be from 50 to 70%.

Lighthouse floor plaster will not send you to the bank for a loan. This is a very time consuming but inexpensive type of finishing. It is rational to use it with a height difference of up to 20 mm.

If we consider the wall planes, then two global questions arise at once. This is a rough and fine finish. The second follows the first, and therefore we will consider them in order.

It's good if the house is new and your walls are flat, not yet finished with anything. In this case, ordinary lime plaster will be the simplest and cheapest option for you. It lies down easily, is inexpensive, and also has good vapor permeability and excellent bactericidal properties. Savvy entrepreneurs have already begun to pack and sell them with triple wrap. But you order the mixture at RBU or prepare it yourself. You just need to know that plastering with lime-sand mortar occurs in three stages and each of them has its own recipe:

• Splashing (mixture 1: 2)
• Priming (mixture 1: 3)
• Nakryvka (mixture 1: 5)

But what if the plaster is already there and its quality does not suit you at all? There are exactly three options:

Dismantle the old plaster layer, throw away the garbage truck, and apply a new one according to all the rules. This is the most solid, correct, but not very attractive idea. It takes a lot of time and effort. The whole house turns into a dusty hell, And in it, by the way, then you still have to work.

The second option is to arm yourself with an ax, a rule and cut down only fragments that enter the future plane, and throw holes in the pits with a shukaturka. In this case, there will be less dust, the plaster solution will also be used up a little, but the headache will increase, more than enough. Thoughtlessly hammering with a puncher in this situation will no longer work. First, you have to align all the corners, and then carefully, like a sculptor, form planes along them. The problem is still the same.

Well, the third path is for the laziest. Here you will only need to cut down well, very serious influxes. And then the walls are primed and pasted over with plasterboard. True, you will lose a lot of space, but still less than if the same gypsum board was twisted on a metal frame. Yes, and the material will not be such an expense.

But to form a plane is only half the battle, it still needs to be somehow refined. And tapestries are still the most budget technology here. The walls do not need to be "licked" under them, and the design there can be really matched to any interior. Just try to choose the material without selecting the pattern. There will be fewer clippings, which means less waste.

An alternative to paper can only serve as an increasingly popular "liquid" wallpaper. It is also an inexpensive type of finish, which is highly repairable, waste-free and undemanding to the surface to be treated. Wet wallpaper will hide all minor flaws with a bang.

And so, little by little, making repairs in a private house with our own hands, we gradually got from the ceiling to the floor. There are disputes today around two main materials. Parquet boards and laminate. The latter is stronger and cheaper, the board is more beautiful. As for us, the choice for budget renovation is obvious, especially since those who really pursue beauty prefer block parquet.

Linoleum is the only real alternative to laminate. Chemistry is of course still the same, but when you have only a penny in your pocket you don't have to choose much. But it is also not worth rushing to the other extreme and buying everything that is not hitting. We advise you to take a closer look at semi-commercial linoleum. It has good wear resistance at a fairly affordable price. Commercial samples, however, are even more reliable, but for their installation you need a special soldering iron, which no one will give you for free.

Well, and finally, we want to give some advice for owners of small summer cottages. When the existing house has a size of only forty squares, the question of how to make repairs in it with your own hands is necessarily inexpensive no longer so acute. Here we would lay out on the available space all the functional areas necessary for a comfortable life, so that you do not have to combine a bathroom and an office or a bedroom with a dining room.

But it is not enough to find the right planning solution, you still need to somehow add visual squares to the rooms, or, as an option, keep the existing ones to the maximum. Here 5 proven interior design techniques will help you.

1. Maximum of white or blue. These colors visually expand the space. Just do not get carried away, you need to leave at least the floor as a reference point, otherwise the house will resemble a hospital.

2. Glass furniture - glass walls. Transparent interior items do not clutter up the space, and a showcase instead of a wall will expand the boundaries of the room into the courtyard.

3. Same gender. It will help to visually expand the walls and one flooring pattern throughout the house. It so happened that we often look at our feet than at the ceiling, and it is by the floor that we measure the space.

4. For the same reasons, we advise in small houses to choose furniture only with legs. The more of your laminate or linoleum is visible, the easier it will be to fool the tightness.

5. And, of course, mirrors will help you. The world of Lewis Carroll existing in them will complement the interior space and create the illusion of spaciousness.

Fast and inexpensive DIY home repairs

Renovation is a sore subject for most owners of country houses and apartments. It often takes a lot of investment and effort to give rooms a stylish, modern look. Do not know, how to make repairs in an apartment do it yourself inexpensive and fast? Replacing windows, painting the ceiling, re-wallpapering, flooring - all this can be done quickly and inexpensively without assistance. With the right choice of materials and a little more effort, you can make a high-quality and beautiful renovation with modern finishes.

The site that requires the participation of a specialist if repair or replacement is necessary is electricity. The most economical option in this case is to call a specialist. Installation of sockets in the apartment can be carried out without his help. A tool for repairing an apartment is the cheapest one to rent.

Photo of inexpensive ceiling repair

Before starting an inexpensive repair, first of all, a suitable design is determined and a plan is made. The best time for renovation is autumn. In warm weather, facade work is carried out, and interior work is carried out with open windows.

In addition, prices for material are always reduced by 15% by autumn. Many materials, such as putty, plaster, sealant, assembly glue, leveling screed, have a limited shelf life, and the store sells it at a big discount by the fall.

Photo of inexpensive room renovation

If you need to replace the old plumbing with a quick repair, you can try to restore the old one, but if this is not possible due to significant damage, chips, you can buy plumbing from your hands. Many newcomers in apartment buildings change new equipment immediately after moving in, and the equipment, going to the landfill, is sold by the employees of this organization at a bargain price.

Photo of a bathroom before an inexpensive renovation

Removal of construction packaging, garbage is a rather costly repair item in an apartment, but if you wish, you can take everything in bags to the nearest trash can.

Plywood, beams, slats, boards can be bought on the building materials market. Sheathing slats can be taken unplaned. The croaker is bought raw in advance and dried. By the fall, this material, when purchased in the spring, dries up completely. Plywood of the required thickness can be taken from waste packaging material (containers). The material can be waterproofed with two buckets of PVA-based putty.

Photo of inexpensive bathroom renovation

The floor is covered with plastic. The temperature should not drop below thirteen degrees. The sheet is laid out. Putty is poured into the center and accelerated to the ends with a paint brush. The plywood sheet is closed with plastic, another sheet is laid, the puttying process is repeated until all the sheets are covered.

Photo of inexpensive renovation in the house

Oppression is placed on a stack of putty plywood (over the entire surface). After a week, the sheets are turned over and putty on the other side, then they are also pressed. After two weeks, you can use moisture resistant plywood. Thick timber, boards can also be taken from disassembled containers, pallets. An inexpensive option for finishing walls and ceilings is surface cladding with laminate, MDF.

Nice and inexpensive bathroom renovation

If the lathing is done with a crochet lathing made of wood, there is practically no need to level the surface. Wall cladding in the apartment can be done at chest or belt level, the remaining space can be trimmed inexpensively and quickly with non-woven wallpaper.

An economical type of flooring in an apartment is marmoleum. This material is not suitable for damp rooms. For a bath, toilet, any tile option is used. When using a laminate, the floor needs to be leveled before laying. For the walls in the bathroom, you can use laminated hardboard.

Photo of inexpensive flooring in the apartment

If it is necessary to insulate, glaze the balcony, this is done in the spring. The outer part is sheathed with siding. The inner part is finished with plywood covered with self-adhesive foil. Wooden frames are used for the windows, which you can install yourself. Windows are purchased in early spring, installation closer to summer.

How to start an inexpensive renovation

The doors can be simply upgraded. The door is sheathed with moisture-resistant plywood on both sides. Plywood is glued to the removed door using assembly glue, then everything is placed under pressure. Before gluing the sheets, the old cladding is removed from the door. After that, the door in the apartment is pasted over with self-adhesive under the wood, varnished. The slopes are covered with the same plywood.

Old plumbing is inexpensively cleaned of contamination with acetic acid and washing powder. For stubborn stains, hydrochloric (technical) acid is used for quick removal. Cracked tiles are fairly easy to repair. First it is cleaned with pemolux and vinegar.

The edges are closed with masking tape. Seams are painted with two layers (from a spray gun) nitro paint. Splashes, drips are removed with a solvent, the tape is removed.

Photo of a beautiful inexpensive bedroom renovation

After cleaning, tiles and joints are sprayed with silicone grease (liquid) from a spray can. The lubricant is applied until it no longer absorbs. After three days, the silicone surface is wiped with vinegar.A cast iron bath can get a second life after painting with epoxy or acrylic compound. The heated towel rail in the bathtub is smoothed to a metal surface and covered with a compound.

Useful article: DIY liquid wallpaper, paper making

Before renovation, it is better to look at the photo, then make a plan and get to work. You can also give the apartment an attractive appearance with the help of inexpensive repairs, which are done quickly enough.

This is how it looked before the renovation. Rotten wooden frames, closed from the outside with a double film, from cold and wind. To the left is an old veranda with a drooping porch canopy.

For those who have to make repairs in their home, it appears.

These were the windows and sills.

They began to put the house in order from the foundation.

One by one, we open the corners of the house, remove the rotten logs of the crowns using a chainsaw, put the formwork, put large stones and rubble, lay the reinforcement so that its ends remain open (for later fastening it to the pouring foundation), we wrap the log of the crown with roofing paper and fill it with concrete. ready-made curbstone.

And so all four corners of the house and its middle, along the perimeter. In total - 8 pedestals. The process is time consuming, difficult, but the result is worth it. When the curbstones were finished, we made a mound around the entire perimeter. The continuation of the outdoor work was postponed until the following summer. And we took up the interior renovation of the house.

This is a large room and let's start with it. Before the renovation, it looked like this:

This is her right corner. and this, in the photo below, is the left corner. As I write a thread, I'll stick to these two angles.

First, all layers of the old wallpaper were completely torn off. The windows were still old, but we were already waiting for the masters to install plastic windows.

The old stove was dismantled. and the stove-maker folded a new one.

Installation of plastic windows. the further, the more terrible, but the result is important.

AND THE RESULT DIDN'T MAKE YOURSELF WAIT LONG. I decided to close one window completely and make one big one - there will be a dining room.

After installing the windows, the men began to dismantle the old floor, level the logs and put brick cabinets under them.

Then the floors were laid with old boards (they will serve for a very long time, since they are thick and dry), and in places where there were rotten ones, they were replaced with new boards.

And then my "female work" has already begun, I insulated the walls with penofol,

Installed a metal frame for walls and ceilings. my mistake was that first you need to do the ceiling, and then the walls, and not vice versa. I found the technique for performing these works on the Internet, I will not dwell on it in detail. If you have any questions, I will be happy to answer ,what do I know.

It is much more difficult to fix the frame on the ceiling, the neck hurts.

When the metal frame is completely ready, you can sew gypsum boards to it, preferably in a checkerboard pattern, starting from the ceiling! Do not forget to scatter the electrical wiring and hide it in the gafrochannel, behind the profile, and install the distributor boxes in a place convenient for you.

In this photo you can see wooden blocks, I screwed them on for the subsequent fixing of bookshelves. Exactly the same, only thinner, I fix them under the ceiling above the windows (for attaching the cornices).

When all the walls and ceiling are sheathed with gypsum board, we putty with a spatula and align all the joints between the sheets and the places where the screws are screwed in with this composition.

At the corners and seams, we lay a reinforced mesh for the strength of the joints, and after everything is dry, we sand it, apply a primer to the walls and ceiling.

And now the most interesting moment is wallpapering. I took vinyl white on the ceiling and with delicate roses on the walls.

When the wallpaper is dry, I by mutual agreement

invited a team of craftsmen to finish their work in this room on the windows (slopes and window sills).

After that, I glued the ceiling plinth, hung the shelves on the wall, put my flowers on the windowsills, which the guys from the company had already installed for us.

The carpenter helped put the interior door, only then I found out that it was standing upside down.(what a difference!) if only it functions normally.

I pasted the doorways with a white corner on a liquid nail. On the right side, the stove is new, heats all the rooms at once.

The firebox itself is in the bathroom.

I put a substrate on the rough floor, then fiberboard and linoleum. Then she screwed the floor plinths with self-tapping screws and voila-beauty.

This is the big room.

Some of you wanted to see more details about concrete pedestals, so I added details. So, a layer of windows was inserted, the house was sheathed with flat slate from the outside, and a mound was made around the house, until next summer.

Now let's continue about outdoor work, after the cold winter and spring. next summer.

When all the pedestals are ready, gradually, opening each side of the house from the blockage, remove the rotten logs of the lower crown, dry them with waterproofing,

we install the formwork, lay the reinforcement, connecting it to the ends of the reinforcement of the corner pedestals and fill it with concrete.

We do this together with a man, under my strict guidance.

We make brickwork on the finished foundation.

And as expected, the blind area has been made. not quite ordinary.

This is all about outdoor work, home renovation. If you have any questions, ask, with pleasure that I know, I will answer. And for everyone who is interested, the continuation of the internal renovation awaits - the dining room!

Thank you for your time. Your LYUDMILA.

Dear readers, for a long time we have not had such extensive posts-tutorials on apartment renovation. I am pleased to offer one of the reading aids.

This summer we did a phased decoration of a two-room apartment. First, all the furniture and things were dragged into one room, locked and sealed. After the renovation of the adjacent room and kitchen, everything was moved to the finished premises and the remaining room, corridor, bathroom and toilet were completed. In general, it is not the most convenient repair option. Task: to make good-quality inexpensive repairs from budget materials. Terms: June 10-July 24 - the first stage, August 4-September 10 - the second stage. Estimate: 295800r (only work + stretch ceilings) All work, except for the installation of interior doors and the installation of two of the three windows, was done on our own. There are a lot of photos, so I will post as much as I can and free time appears. So, this is how the “object” appeared before us

the parquet fell off by itself, dismantling consisted of collecting it from the floor and folding it into bags.

This pipe leads to the coil in the bathroom.

Here is such a horror object, we dismantle everything that is possible

First of all, the windows are installed, this window was installed by another company with which the customer agreed earlier

a cold cupboard can be seen under the window, and a radiator hangs behind a door leaning against the wall. The logical solution was to insulate the cabinet and install a new radiator in its place.

on the Perlfix assembly glue we glue the extruded polystyrene foam, then the gypsum board on the same glue

Getting started plastering

first of all, we put our branded beacons

in some places we use the combined technology of leveling the walls, from above the gypsum board is glued to Perlfix, and from below the layer is plastered less

Waste plasterboard can be embedded in a thick layer of plaster

we change the hot water and cold water pipes, the piping to the coil, fill the grooves with plaster

When plastering corners, do not forget about 90 degrees, and of course, verticality

we form the entrance opening using a plank box

We install the window sill and slopes

We bought a special grinder for sanding the walls, it connects to a vacuum cleaner, a great thing

before leveling the floors, we fill in all large defects of the DSP floor

We level large differences without beacons with a semi-dry screed

In the corridor we break part of the old screed with a large crusher

vacuuming, priming, making a rough leveling, vacuuming priming.

we divide the corridor into parts using scrap materials.

slippers for “walking on water” are made of OSB, self-tapping screws and a glamorous strap with rhinestones

During the installation of the stretch ceiling, a force majeure arose, the baguette was torn from the wall

And this happened due to the fact that a thick layer of soft seal was laid between the gypsum wall and the ceiling

the cracks were repaired with pearlfix, putty and the ceiling was put on. That is why it is better to stretch ceilings before wallpapering. Another reason why you should stretch the ceilings before finishing the walls is a possible hit during the installation of the baguette into the electrical wiring (for example, as in this video) And finally, even with the most careful installation of the ceiling, there is a risk of damage to the wallpaper, therefore, we glue the wallpaper only after the stretch ceiling, and we lay the floor coverings after them too.
This miracle of technology is called construction stilts, with their help, all work at a height, including stretch ceilings, is done many times faster. In Russia, these are practically not sold, and if they are sold, they are expensive. We bought it via e-bay. We want to buy something else later, but more on that later.

a mandatory attribute for finishing, this is a vacuum cleaner. As they say, cleanliness is a guarantee of quality