Repair of shower cabins with your own hands replacing glass with what to replace

Even the most expensive and high-quality plumbing can break down over time, not to mention budget options, but this is not a reason to panic, especially when it comes to a shower stall. Its design really has weak points that are vulnerable during operation, so it is advisable to perform simple steps to strengthen it even at the stage of installation and connection. But what if the problem has already occurred? The first thing that comes to mind is replacing the old booth with a new one. It is easier to do this, but more expensive, and sometimes completely new products break down. It is much cheaper to repair the structure yourself, for which you first need to figure out the cause of the breakdown.

There are not so many reasons: either incorrect assembly and connection, or too heavy loads on structural elements. The reasons also include the use of low-quality products, for example, mixers, which often fail.

The main and most "large-scale" breakdowns include:

• broken glass;
• cracked pallet;
• leakage of connections of individual structural elements;
• leakage in water supply or sewage systems.

There are other malfunctions: breakage of wheels, handles, etc., but they are small and easy to deal with without assistance. Do-it-yourself repair of shower cabins is within the power of everyone, because even serious damage to it can be repaired quite simply, which is easy to see by reading this article.

DIY shower repair

The repair depends on the type of breakdown, as well as on the reasons for its occurrence. It is not enough just to fix or replace a damaged part, you also need to eliminate the root cause of the malfunction, otherwise repairs will have to be done regularly. Let's consider in more detail the possible breakdowns, the reasons for their occurrence and how to deal with them.

Broken glass is a common problem for those who use regular, non-tempered glass. Replacing them with new ones will not be a problem, especially if the instructions for assembling the booth have been preserved or if it was originally assembled without the help of specialists. At the same time, it should be noted that only the front compartments and sliding doors can be replaced locally, while replacing the rear panel will require dismantling the top of the structure, and this is already a more responsible and difficult task.

The cab windows can be equipped with an aluminum edging or do without it, but at the same time they are all fixed in the frame with rubber seals, which are responsible for the tightness and reliability of the connection. To replace the glass sheet, one or more racks are dismantled, the seal is removed, and the fragments are removed. To install a new glass, you need to do the same in reverse order.

DIY shower repair

Transparent impact-resistant films are often used to strengthen glass surfaces and increase their strength. They are glued over the entire surface, after which the canvases are not afraid of even strong blows, and according to their characteristics, they are close to hardened ones. Considering the cost of glass, it is much cheaper to purchase a film once than to periodically change certain cracked walls of the booth. In addition, fragments can be harmful to health, so it is also unsafe to use glass "in its pure form". Thus, repairing a shower stall with your own hands in case of cracked or broken glass consists in replacing it.

A cracked pallet made of acrylic is a common phenomenon, and it's not even about the quality of the product, but about the features of its design and correct installation. The acrylic pallet is not reinforced in the center, where it takes up the maximum loads, as a result of which its surface gradually sags. Sometimes cracks appear during careless use or when exposed to mechanical shock, but these are already special cases. Do-it-yourself repair of the acrylic shower tray is carried out using liquid acrylic, which is poured into the cracks, provided that their length does not exceed 35 cm.If there are holes on the surface, their dimensions should be within 100x100 mm. The repair material - liquid acrylic - is sold as a repair kit - a kit that includes all the necessary components. It contains liquid acrylic itself, as well as a special hardener and abrasive skins for grouting.

Cracking in the shower tray - repair

The sealing of cracks in the shower tray is carried out using the following technology:

• the crack is slightly expanded with the help of a grinder so that chamfers are formed at the edges, forming a "bowl" for pouring;
• the surface of the edges is cleaned of dust and debris, treated with alcohol;
• liquid acrylic is mixed with a hardener in accordance with the instructions;
• the crack is poured with a ready-made mixture, its excess is removed with a rubber spatula;
• the place of pouring is sealed with tape;
• after complete drying, the time of which is indicated in the instructions for the repair kit, the adhesive tape is removed, and the surface is polished with abrasive paper.

The technology is really very simple, but its effectiveness will be reduced to zero if measures are not taken to strengthen the pallet structure. Otherwise, new cracks will not be long in coming. To strengthen the pallet, you will need bricks and foam. The sequence is as follows:

• the front screen is dismantled;
• a "pillow" of bricks is laid out under the pallet, which are simply stacked on top of each other without using mortar;
• the distance between the bricks and the bottom is filled with Macroflex 65 polyurethane foam or another, which has a low coefficient of expansion.

This simple procedure will allow you to get a reliable "foundation" for the pallet and will not let it sag in the center, where cracks usually appear.

Repair of a bathroom with a shower, a photo of examples of which can be viewed on our website, often involves the replacement of plumbing. Also, in some cases, the shower tray is already so broken that it makes no sense to repair it - it is easier to just throw it out, and install a new one in its place.

Pallet repair - replacing the old one with a new one

In any case, you can do it yourself, taking into account the following recommendations:

• the pallet must be level. Its horizontal position will provide an effective drainage of water into the sewer opening from the entire surface. If the horizontal is broken, puddles will remain in the corners;
• the pallet should be positioned so that free access to the sewage system is provided for periodic cleaning of the pipes. For this, a mounting clearance is provided.

This is just the case when you cannot do without dismantling the shower stall, otherwise the result of the repair will be temporary, and after a week the traces of smudges will again make themselves felt. The first and main reason for leaks is improper assembly of the structure, leaks in its connections.

Repair of shower stall connections from leaks

The essence of the repair is disassembly and reassembly of the shower stall in compliance with the basic rules:

• the pallet should fit as tightly as possible to the wall, which ensures its rigid fixation. To do this, hooks are attached to it from below, which press it against the walls.After installing them, the pallet is slightly moved away from the walls, silicone is pumped into the resulting gap, and then the pallet is firmly pressed against the walls using hooks. At the same stage, it is filled with water, which makes it possible to control its tightness. The final touch is the installation of decorative corners that can be attached immediately;
• leaks can appear at the joints of the walls with the cab screen, and at the joints of the screen with the pallet. To eliminate traces of leakage, the screen is removed, the joints with it are thoroughly cleaned of the remnants of old silicone and filled with new ones, after which the screen is installed in its original place. All fasteners are securely clamped, and the structure is left until the sealant is completely dry (6-8 hours).

If you follow the basic repair rules and use high-quality materials, you can forget about leaks for a long time. The shower stall will now look and function like new.

Plumbing fixtures include mixers, nozzles, and water and sewer pipes hidden behind the shower stall. Leaks are associated not so much with the equipment itself, but with the places of its connections and connections. It is here that the tightness is most often violated for one reason or another, and the consequences of this violation can be dire. Therefore, it is necessary to solve the problem at the first signs of its appearance, and it is better to take preventive measures so that it does not appear at all.

If leaks are detected, you will have to dismantle the cab in order to get to the place of connection to communications. As a rule, the hose fails. To fix it, it is tightly crimped with a metal clamp or completely replaced with a new one.

Shower cabin drain repair

Faucets in shower cabins are different, and not all of them can be repaired. Non-disassembled models cannot be repaired - they can only be replaced with serviceable ones. Collapsible joystick mixers are equipped with a cartridge, the replacement of which is a repair.

Other types of shower breakdowns - replacement of handles or rollers, etc. - can be repaired by yourself by replacing broken parts. In these cases, it is not necessary to completely dismantle the structure or carry out other complex actions.

Often the reason for replacing plumbing is not a malfunction, but a repair in the bathroom. Photos with a shower, with a bath or with their joint installation can be evaluated on our website.

The main causes of malfunctions in the shower stall can be improper assembly or installation, as well as a long service life. Even quite.

A do-it-yourself shower stall is a great way to create an exclusive bathroom interior in your home. A shower cabin can be found more and more often in.

Foreword Not so long ago, shower cabins were considered a luxury, however, today they are available to all plumbing products. Many people find them much more convenient.

The main causes of malfunctions in the shower stall can be improper assembly or installation, as well as a long service life. Even very high-quality and expensive products are subject to all kinds of breakdowns, and this is natural. However, repairing shower cabins with your own hands can be done quite simply if you understand how to fix a number of common problems.

Most often, the hose bursts in the shower stall. Before you repair your shower hose, you should go to the store and buy a new one, as the easiest solution is to replace it with a new one. To do this, you should:

• unscrew the watering can;
• using special keys, unscrew the nut from the mixer;
• wrap a new hose onto the mixer using rubber gaskets;
• wrap a new hose to the watering can with a nut.

The hose clamp can be used to repair the shower hose.

When purchasing a new hose, it is best to go to the store with the old one. This will help you buy a product with a similar thread on the nuts.

If for some reason it is not possible to replace it, then you need to figure out how to fix the shower hose. To do this, you can select the appropriate size and diameter element from the PVC-hose and insert it into a leaky place or install a clamp.