Repair of shower cabins with your own hands replacing glass with what to replace

In detail: do-it-yourself shower cabins repair glass replacement from a real master for the site my.housecope.com.

Even the most expensive and high-quality plumbing can break down over time, not to mention budget options, but this is not a reason to panic, especially when it comes to a shower stall. Its design really has weak points that are vulnerable during operation, so it is advisable to perform simple steps to strengthen it even at the stage of installation and connection. But what if the problem has already occurred? The first thing that comes to mind is replacing the old booth with a new one. It is easier to do this, but more expensive, and sometimes completely new products break down. It is much cheaper to repair the structure yourself, for which you first need to figure out the cause of the breakdown.

There are not so many reasons: either incorrect assembly and connection, or too heavy loads on structural elements. The reasons also include the use of low-quality products, for example, mixers, which often fail.

The main and most "large-scale" breakdowns include:

broken glass;
cracked pallet;
leakage of connections of individual structural elements;
leakage in water supply or sewage systems.

There are other malfunctions: breakage of wheels, handles, etc., but they are small and easy to deal with without assistance. Do-it-yourself repair of shower cabins is within the power of everyone, because even serious damage to it can be repaired quite simply, which is easy to see by reading this article.

DIY shower repair

The repair depends on the type of breakdown, as well as on the reasons for its occurrence. It is not enough just to fix or replace a damaged part, you also need to eliminate the root cause of the malfunction, otherwise repairs will have to be done regularly. Let's consider in more detail the possible breakdowns, the reasons for their occurrence and how to deal with them.

Video (click to play).

Broken glass is a common problem for those who use regular, non-tempered glass. Replacing them with new ones will not be a problem, especially if the instructions for assembling the booth have been preserved or if it was originally assembled without the help of specialists. At the same time, it should be noted that only the front compartments and sliding doors can be replaced locally, while replacing the rear panel will require dismantling the top of the structure, and this is already a more responsible and difficult task.

The cab windows can be equipped with an aluminum edging or do without it, but at the same time they are all fixed in the frame with rubber seals, which are responsible for the tightness and reliability of the connection. To replace the glass sheet, one or more racks are dismantled, the seal is removed, and the fragments are removed. To install a new glass, you need to do the same in reverse order.

DIY shower repair

Transparent impact-resistant films are often used to strengthen glass surfaces and increase their strength. They are glued over the entire surface, after which the canvases are not afraid of even strong blows, and according to their characteristics, they are close to hardened ones. Considering the cost of glass, it is much cheaper to purchase a film once than to periodically change certain cracked walls of the booth. In addition, fragments can be harmful to health, so it is also unsafe to use glass "in its pure form". Thus, repairing a shower stall with your own hands in case of cracked or broken glass consists in replacing it.

A cracked pallet made of acrylic is a common phenomenon, and it's not even about the quality of the product, but about the features of its design and correct installation. The acrylic pallet is not reinforced in the center, where it takes up the maximum loads, as a result of which its surface gradually sags. Sometimes cracks appear during careless use or when exposed to mechanical shock, but these are already special cases. Do-it-yourself repair of the acrylic shower tray is carried out using liquid acrylic, which is poured into the cracks, provided that their length does not exceed 35 cm.If there are holes on the surface, their dimensions should be within 100x100 mm. The repair material - liquid acrylic - is sold as a repair kit - a kit that includes all the necessary components. It contains liquid acrylic itself, as well as a special hardener and abrasive skins for grouting.

Cracking in the shower tray - repair

The sealing of cracks in the shower tray is carried out using the following technology:

the crack is slightly expanded with the help of a grinder so that chamfers are formed at the edges, forming a "bowl" for pouring;
the surface of the edges is cleaned of dust and debris, treated with alcohol;
liquid acrylic is mixed with a hardener in accordance with the instructions;
the crack is poured with a ready-made mixture, its excess is removed with a rubber spatula;
the place of pouring is sealed with tape;
after complete drying, the time of which is indicated in the instructions for the repair kit, the adhesive tape is removed, and the surface is polished with abrasive paper.

The technology is really very simple, but its effectiveness will be reduced to zero if measures are not taken to strengthen the pallet structure. Otherwise, new cracks will not be long in coming. To strengthen the pallet, you will need bricks and foam. The sequence is as follows:

the front screen is dismantled;
a "pillow" of bricks is laid out under the pallet, which are simply stacked on top of each other without using mortar;
the distance between the bricks and the bottom is filled with Macroflex 65 polyurethane foam or another, which has a low coefficient of expansion.

This simple procedure will allow you to get a reliable "foundation" for the pallet and will not let it sag in the center, where cracks usually appear.

Repair of a bathroom with a shower, a photo of examples of which can be viewed on our website, often involves the replacement of plumbing. Also, in some cases, the shower tray is already so broken that it makes no sense to repair it - it is easier to just throw it out, and install a new one in its place.

Read also: DIY abs block repair on bmw

Pallet repair - replacing the old one with a new one

In any case, you can do it yourself, taking into account the following recommendations:

the pallet must be level. Its horizontal position will provide an effective drainage of water into the sewer opening from the entire surface. If the horizontal is broken, puddles will remain in the corners;
the pallet should be positioned so that free access to the sewage system is provided for periodic cleaning of the pipes. For this, a mounting clearance is provided.

This is just the case when you cannot do without dismantling the shower stall, otherwise the result of the repair will be temporary, and after a week the traces of smudges will again make themselves felt. The first and main reason for leaks is improper assembly of the structure, leaks in its connections.

Repair of shower stall connections from leaks

The essence of the repair is disassembly and reassembly of the shower stall in compliance with the basic rules:

the pallet should fit as tightly as possible to the wall, which ensures its rigid fixation. To do this, hooks are attached to it from below, which press it against the walls.After installing them, the pallet is slightly moved away from the walls, silicone is pumped into the resulting gap, and then the pallet is firmly pressed against the walls using hooks. At the same stage, it is filled with water, which makes it possible to control its tightness. The final touch is the installation of decorative corners that can be attached immediately;
leaks can appear at the joints of the walls with the cab screen, and at the joints of the screen with the pallet. To eliminate traces of leakage, the screen is removed, the joints with it are thoroughly cleaned of the remnants of old silicone and filled with new ones, after which the screen is installed in its original place. All fasteners are securely clamped, and the structure is left until the sealant is completely dry (6-8 hours).

If you follow the basic repair rules and use high-quality materials, you can forget about leaks for a long time. The shower stall will now look and function like new.

Plumbing fixtures include mixers, nozzles, and water and sewer pipes hidden behind the shower stall. Leaks are associated not so much with the equipment itself, but with the places of its connections and connections. It is here that the tightness is most often violated for one reason or another, and the consequences of this violation can be dire. Therefore, it is necessary to solve the problem at the first signs of its appearance, and it is better to take preventive measures so that it does not appear at all.

If leaks are detected, you will have to dismantle the cab in order to get to the place of connection to communications. As a rule, the hose fails. To fix it, it is tightly crimped with a metal clamp or completely replaced with a new one.

Shower cabin drain repair

Faucets in shower cabins are different, and not all of them can be repaired. Non-disassembled models cannot be repaired - they can only be replaced with serviceable ones. Collapsible joystick mixers are equipped with a cartridge, the replacement of which is a repair.

Other types of shower breakdowns - replacement of handles or rollers, etc. - can be repaired by yourself by replacing broken parts. In these cases, it is not necessary to completely dismantle the structure or carry out other complex actions.

Often the reason for replacing plumbing is not a malfunction, but a repair in the bathroom. Photos with a shower, with a bath or with their joint installation can be evaluated on our website.

The main causes of malfunctions in the shower stall can be improper assembly or installation, as well as a long service life. Even quite.

A do-it-yourself shower stall is a great way to create an exclusive bathroom interior in your home. A shower cabin can be found more and more often in.

Foreword Not so long ago, shower cabins were considered a luxury, however, today they are available to all plumbing products. Many people find them much more convenient.

The main causes of malfunctions in the shower stall can be improper assembly or installation, as well as a long service life. Even very high-quality and expensive products are subject to all kinds of breakdowns, and this is natural. However, repairing shower cabins with your own hands can be done quite simply if you understand how to fix a number of common problems.

Most often, the hose bursts in the shower stall. Before you repair your shower hose, you should go to the store and buy a new one, as the easiest solution is to replace it with a new one. To do this, you should:

unscrew the watering can;
using special keys, unscrew the nut from the mixer;
wrap a new hose onto the mixer using rubber gaskets;
wrap a new hose to the watering can with a nut.

The hose clamp can be used to repair the shower hose.

When purchasing a new hose, it is best to go to the store with the old one. This will help you buy a product with a similar thread on the nuts.

If for some reason it is not possible to replace it, then you need to figure out how to fix the shower hose. To do this, you can select the appropriate size and diameter element from the PVC-hose and insert it into a leaky place or install a clamp.

In connection with improper installation, which arises from incorrect adjustment of the legs in the support frame of the pallet or due to inaccurate use, a crack may form in it. If it is not possible to replace it with a new one, then you need to know how to repair the shower tray.In the event of cracks not exceeding 35 cm in length or holes with dimensions not exceeding 100 × 100 mm, pouring liquid acrylic is an excellent solution to the problem. To do this, you need to purchase a repair kit for acrylic bathtubs, which includes liquid acrylic, hardener and abrasive laces. To carry out repairs, you should:

expand the crack by a few millimeters with a grinder;

clean the place of repair on the pallet from dirt, degrease;

prepare a mixture of liquid acrylic and hardener, according to the instructions;

pour the mixture into a hole or crack;

remove excess mixture using a rubber spatula;

seal with tape and leave to dry completely;

remove the tape and polish the repaired area.

Having eliminated the hole or crack, it is necessary to find out and get rid of the causes of their occurrence. To do this, you can strengthen the pallet by laying out a brick pillow under it and filling it with polyurethane foam with a low coefficient of expansion. Image - Repair of shower cabins with your own hands replacing glass with what to replace

A brick cushion will protect the pallet from cracking.

The mixer in the shower has a more complex device than in other plumbing fixtures. Various factors can cause breakdowns, which makes this phenomenon common. Therefore, for normal operation, you need to know how to repair a shower cabin in the event of a mixer breakdown.

Often, many are faced with such a problem as a weak flow of water from the shower, this can be caused by a clogged aerator. To eliminate it, you must:

Remove the aerator.

Rinse it under running water or blow it out.

Install in its place.

If a spout is leaking, the O-rings or rubber gaskets must be replaced. To do this, you should:

Unscrew the nut holding the spout and remove it.

Unscrew the bushing inside the spout together with the nut using a hexagon.

Remove the sleeve from the nut.

Replace worn-out O-rings with new ones.

Assemble the mixer in reverse order.

In case of complex malfunctions that are difficult or impossible to eliminate, a complete replacement of the mixer in the shower stall is recommended for normal operation.When troubleshooting faucets, it is not recommended to use gas or adjustable wrenches. All work can be done by hand.If the siphon breaks, it will create an unpleasant odor in the shower stall. In order to repair the siphon in the shower, remove the pallet screen, unscrew the upper part of the siphon and replace it with a new one.Replacing a sewer siphon is a very laborious process. During this type of work, you will need rubber gaskets and special tools. It may also be necessary to remove the obstruction of the bend. To do this, the siphon must be disassembled and cleaned.If you follow the instructions, then replacing the cartridge in the shower is not difficult. First, you need to turn off the water from the common riser and raise the mixer lever to the highest position. After that, remove the cap with blue and red markings using a thin screwdriver. By loosening the screw under it, you can remove the mixer lever. Image - Repair of shower cabins with your own hands replacing glass with what to replace

This is what a shower cartridge looks like

Next, you need to carefully unscrew the chrome decorative cap and the nut that secures the cartridge using an adjustable wrench.After cleaning the cartridge seat, install a new one. After that, it is necessary to carry out all the listed processes in the reverse order.

Replacing glass in a shower stall is a very simple process if it is doors, side and front windows. Replacing the rear walls involves dismantling the entire top of the shower stall, which complicates the process.All glasses are installed using rubber seals. In order to remove the broken glass, it is necessary to remove one booth pillar, remove the seal and remove the glass fragments. Install a new glass and carry out the same processes in reverse order.In order to eliminate the possibility of subsequent breakage of the glasses, it is recommended to protect them with an impact-resistant film. This method is suitable for ordinary non-tempered glass.Various problems can occur in shower cabins. Many of these are associated with leaks in pipes and connections that are hidden behind the shower panel. These types of problems are easier to prevent than fix. The panel is connected to the rear walls of the booth, and complete dismantling is required to access the communications. The exception is the shower box, which is not attached to the wall, and the repair is therefore easier. For troubleshooting, it can be simply pushed aside.In addition, minor breakdowns such as wear on rollers and door handles may occur. In this case, before fixing the shower, you do not have to study complicated instructions, since the repair is simple. Image - Repair of shower cabins with your own hands replacing glass with what to replace

This is how the rollers of the shower stall door look.

As a result of aggressive action of various agents or mechanical damage, traces of corrosion can appear on metal parts. To eliminate them, you must:

Sand the damaged area.
In case of deep damage, apply auto-putty and sand again.
Degrease the surface.
Blow out the paint from the spray can.

When the booth is leaking, the equipment must be sealed. Before that, you should remove the old sealant and wash the frame with soapy water. Dry, degrease and apply new sealant.

Beautiful plastic booths quickly filled the world market and imperceptibly moved into the apartments of townspeople and the houses of villagers. They were loved for their practicality and functionality.

Over time, some elements of the boxes fail, others wear out, however, skilled owners repair the shower cabin and restore or replace parts on their own.

Economical showers with a minimum of functions or expensive hydromassage boxes are designed for daily hygiene - taking a shower.

Some of them can be used as a bath. These are complex devices with many parts. There are a lot of box modifications: from open, resembling an ordinary shower with protective partitions, to closed, sealed and stuffed with electronics.

Simple self-assembled models and complex factory modifications also break, and some of the problems are common. For example, any of the presented cabins can crack the protective screen or fail the mixer.

A list of breakdowns that are most often encountered by users of shower boxes:

wear of the ladder or water seal installed under the bottom;
deformation of the pallet or the appearance of cracks on its surface;
mechanical damage to doors or protective screens;
breakage of door rollers or hinges responsible for opening;
failure of shower equipment - watering can, hose, mixer.

Complicated electronically controlled models can break electrical parts or experience a software failure.

Only specialists are able to deal with electronics on their own, broken glass or a deformed pallet is better to replace, however, minor breakdowns can be eliminated on your own.

For example, to repair the rollers, restore the pallet, clean the plumbing filter or clean up scratches on the plastic screen, even an amateur can do it.

Professional repairs are another waste of the household budget, and sometimes urgent restoration of parts is required. Therefore, we will find out how to fix a broken shower cabin on our own, without the involvement of qualified craftsmen. Let's consider only those situations in which special skills are not required.

The design of the built-in shower mixer differs from the traditional type, installed on the sink or above the bath.

It consists of a control unit - two handles and working communications - a system of thin tubes. The first ceramic cartridge with holes is responsible for switching hot / cold water, the second regulates the flow of water in the desired direction.

You can understand that the cartridge is faulty or the housing element is cracked by the leak that appears. Water begins to leak either when the tap is turned on, or constantly. In the first case, the seal is likely to wear out, in the second - a crack on the cartridge.

The opposite is also possible - water does not flow well into the shower. This is due to blockages: over time, the holes become clogged with limescale or corrosive deposits.

To cope with the problem, it is necessary to dismantle the entire mixer block. For work, you will need a set of screwdrivers, pliers with narrow legs. Purpose: disassemble the mixer, find the cause of the leak, repair or replace the part, install the unit in place.

Crack bonding is a temporary fix. In order for the mixer to continue performing all available functions, it is necessary to replace the cartridge with a new one.

However, preventive cleaning of metal and plastic parts is helpful. To reduce lime scale, we recommend using filters, both special for shower cabins, and general filters installed on the water supply pipes.

Cast iron and even steel pallets are not used in shower cabins. New models are made of acrylic - a durable, "warm", lightweight material.

But the acrylic bottom has a huge drawback - frequent breakdowns due to the large weight of a person taking a shower, or due to mechanical damage. In both cases, cracks form through which water flows out.

If water begins to flow from under the base of the cabin, the bottom is significantly deformed or cracks become visible - this is a signal for urgent repair.

A small wear can be restored without removing the pallet from its place, but for a thorough repair it is necessary to disassemble the booth and dismantle the base.

spatula, chisel, stationery knife, sandpaper - to remove the acrylic layer;
a drill with attachments and an engraver - for cleaning the base and cracks;
brushes for applying glue and acrylic fill.

To completely renovate a pallet, you first need to remove the old acrylic layer, clean all surfaces, make a patch of fiberglass from the outside and an acrylic fill from the inside.

In order for a fiberglass patch to serve for a long time, you must choose high-quality glue. An example of a reliable composition is the two-component EDP glue. It does not react to water and maintains its adhesion quality for many years.

The advantage of the imported analogue Plexus MA 420 is excellent adhesion even to an unpolished surface. But the alternative costs more than 2 thousand rubles, while the domestic EAF is 140-160 rubles.

If there is a choice before replacement and repair, you can safely experiment with the restoration with your own hands. It will not work - you can always buy a replacement, but if everything succeeds, you will acquire an almost new pallet and useful skills.

Small inconspicuous rollers hide under decorative strips at the bottom of glass or plastic doors.

They are tightly covered, nevertheless, water penetrates through the slots even into the bearings.As a result, the internal metal elements of the rollers become covered with rust and become clogged with dirt - a sediment of imperfect composition of tap water.

You will notice the need for cleaning or replacement when the door starts to open with force, strange noises when moving and partial blocking.

The problem is solved simply: you need an anti-rust solution, kerosene, grease, a screwdriver and pliers.

The final touch is the installation of a decorative overlay. We check the quality of work by opening and closing the booth door. After cleaning, it should move freely, without squeaking and delay.

The sooner you notice the problem and clean the rollers, the easier the procedure will be. In advanced cases, the balls inside the body are tightly "welded", it becomes extremely difficult to restore their work.

In some situations, it is easier to buy new parts, but it is not always possible to find the right size.

We do not recommend repairing the cab electronics. If the hardware has stopped correctly executing the commands, you need to call the wizard. Warranty repairs are free of charge, so be sure to keep your receipts and paperwork.

For post-warranty service, you can contact a company specializing in plumbing repair.

For replacement of glasses, pallet or complete disassembly / assembly of the booth, you can also contact the master. If you have no experience of such work and free time, then you can save more than one day by spending a small amount.

It is useful to check the prices of the parts before starting the repair. It also happens that replacing a pallet or shower block costs a little more than restoration work, so it makes sense not to waste time and just install new structural elements.

Videos, shot by craftsmen and amateurs, contain many useful tips and recommendations for repair work.

How to repair the pallet or prevent leakage: