DIY joystick repair

In detail: do-it-yourself joystick repair from a real master for the site my.housecope.com.

You can download movies, clips, episodes, trailers for free, and you do not need to visit the Youtube site itself.

Download and watch an ocean of endless video in high quality. Everything is free and without registration!

Any.

You can replace the 3d analogue of the xbox one joystick yourself or contact us. ******* To carry out repairs.

In this video, I will briefly talk about the reason for the need to clean the gamepad. After directly.

A new gamepad or as it is popularly called a new-generation joystick from the Xbox One S Developers are few.

If you do not have time and do not want to make repairs on your own, then come to us. Renovate.

The cable of the gamepad broke how to fix it. How to solder a gamepad. Broke the cable on the gamepad how to solder. Gamer.

Video (click to play).

The analog itself can be bought on the Internet, it is desirable to have a semi-professional tool. You can ask questions.

Unsuccessful attempt to repair the gamepad from the PS2 console, the crosspiece partially does not work.

During the game, the joystick began to periodically disconnect and reconnect, as if someone was inserting it and pulling it out.

if the joystick leads to the side, then this video is for you!

Express repair of Xbox 360 with faulty graphics.

In this video I will tell you how to remake a joystick with a standard cassette for finger-type batteries on the Accumu.

I already somehow repaired one of the PS2 gamepads for which I had a video not so long ago. Then it was origi.

What's inside :) Joystick repair Gamepad USB 2.0 Wired Controller Black Gamepad Joypad Joypad Gamepad Regu.

Why can't a person find the videos they want on Youtube? The thing is that a person cannot come up with something new and look for it. He was out of fantasy. He has already watched a lot of various channels, and he no longer wants to watch anything (from what he watched earlier), but what to do in this situation?
In order to find a Youtube video that suits your needs, it is imperative to keep searching. The harder your search is, the better your search result will be.
Remember that you only need to find a few channels (interesting), and you can watch them for a whole week or even a month. Therefore, in the absence of imagination and unwillingness to search, you can ask your friends and acquaintances what they are looking at on Youtube. Perhaps they will suggest original vloggers that they like. You, too, may like them, and you will become their subscriber!

Online mp3 cutting is convenient
and a simple service to help you
create a musical ringtone yourself.

YouTube video converter Our online video
the converter allows you to download videos from
YouTube website in webm, mp4, 3gpp, flv, mp3 formats.

These are radio stations to choose from by country, style
and quality. Radio stations all over the world
over 1000 popular radio stations.

Live broadcast from webcams is made
absolutely free in real
time - broadcast online.

Our Online Television is more than 300 popular
TV channels to choose from, by country
and genres. Broadcasting of TV channels is free.

A great opportunity to start a new relationship
with a continuation in real life. Random video
chat (chat roulette), the audience is people from all over the world.

# REPAIR_JOYSTICK. # REPAIR_JOYSTICK_PS_with your_hands. #DIY_CAM

# Joystick_PS3_ repair is quite often a demanded service in modern service centers. And the point here is not at all that the console itself has a low degree of protection.

On the contrary, # PlayStation_3 has all the prerequisites to be considered the most advanced console.The developers and manufacturers have taken great care to make this console as reliable as possible.

However, repairing # PlayStation_3 is still an often requested service. And the point here is not in the reliability of the set-top box, but in the features of the operation by the users themselves.

As a rule, a new game console is only carefully handled in the first couple of weeks after purchase. And then something happens that, as a result, can lead to serious damage, when # repair_ of the PS3 controller is inevitable.

What should an ordinary user do so that # repair of the PS4 controller does not take as long as possible? First of all, observe the elementary operating rules.

Do not drink or eat near the console, and avoid spilling food or liquids on the joysticks.

Do not bump the joysticks on hard surfaces or drop them.

Store the console and all accessories so that there is no chance of accidentally stepping on the controller.

Finally, do not handle the joystick unless you are sure your hands are clean.

In general, # joysticks and # controllers are the so-called risk group of any game console. Therefore, as soon as you have covered the interruptions in the operation of the joystick, we recommend that you immediately go to a good service center.

CHANNEL FOR CREATIVE “# DIY_SAM”:

This channel was created for those who love life, who love to create # with their_hands for independent, purposeful and creative people. The content of the channel will consist of videos that will tell you how to do various things with your own hands. Moreover, the videos will relate to completely different areas of activity, the main criterion is “# make_ yourself”.

DualShock joysticks, of course, break, and they get dirty both inside and out, this should not be a secret for anyone. Moreover, we all expect that sooner or later this device will have to be returned for repair. And the reason, in fact, is one and understandable - either you play and it breaks down, or you don’t play and it’s like new with you, only why then was there a purchase!

In addition, the joystick is "at the forefront of the gaming front." He does not always withstand our excitement or impatience. What can I say, dropping the joystick from the dining table is a common thing. If he were on the wire, it would have saved. But there is no wire and our joystick flies right up to the "very finish" - and it's good if the landing is soft.

Of course, cleaning and repairs, and quite cheap, will be readily performed at any specialized service center. But just why waste time and money on this, it is not difficult and you yourself can handle it yourself.

Yes, it is not difficult, but it requires respect for oneself, first of all, a calm, but thoughtful preparation:

Prepare a comfortable workplace - a clean table is best so nothing gets in the way.
Prepare several Phillips screwdrivers, well, or attachments - actually, one is enough, but, as usual, you never know which one will be most convenient, so just in case - several.
For cleaning - a very mild soapy solution, if alcohol, then not higher than 70%, but it will need to be used very carefully, literally "on the corner of a cloth."
And also for cleaning - a clean cloth, but not giving off lint.

We also cook ourselves - wash our hands thoroughly, there can be no talk of any fat heels

Before you start, you need to be very clear about why all this is: cleaning the PS3 joystick - is it really just out of purely "sports" interest to find out what's inside.

The PS3 gamepad does not work at all, then it is simply useless to get inside, you will not have original spare parts, and you will only have to install a self-propelled gun more expensively. Do-it-yourself PS3 joystick repair is almost hopeless.
If the buttons are jarring, then the autopsy will only help by manifesting this very visit effect, which is called “blow-spit,” just opened it and put it back together, and it all worked.
You need to put in a new battery, this one completely got out, does not pull, and that's it.

It is necessary to shake out the debris and wipe everything inside slightly. Well, this is if you have been playing a lot and for a long time

In all other cases: in case of problems with the boards, with failed engines, with torn rubber bands of the keys - it is useless to fix it yourself, you need to carry it to the service center, where there are spare parts. Or, frankly, prepare 3-4 thousand for the purchase of a new DualShock 3 (although the price actually floats from 2.5 to 7 thousand).

If you nevertheless decided to at least clean the inside, then, armed with attentiveness, accuracy and calmness, we proceed and disassemble:

We turn the joystick down with the keyboard, select the screwdriver and unscrew all the screws, there are 4. The screwdriver must be selected not only by the size of the screws, but also by the diameter of the screwdriver shaft itself, if it is too wide, it may not enter the depth of the screws, in any case not you need to push the screwdriver down with force, you will damage the stroke to the screws.
When the screws are all unscrewed, carefully loosen the case and remove it, we have before our eyes the battery in the fixing frame.
We take out the battery connector and remove the frame, unscrew the two screws that fix the frame of the brackets from the board.
In the process of disassembly, we carefully note the location of all the parts, in no case should we forget "where and what was previously located", although there will be few details.
Next, unscrew the screw that secures the electronic board and the two screws that hold the motors on the right and left.
Gently pulling out the connector, we remove the structure - the board plus two motors.
We got to the keyboard.
Now you can check the condition of the rubber bands of the keys, wipe them and the entire internal space, replace if necessary.

Fully disassembled joystick

After assembly, you can start cleaning the gamepad and the outside. For these purposes, use only a cloth slightly moistened with soapy water, and no drips, only slightly moisten, but the movements are confident, not giving the slightest chance for dirt.This repair does not guarantee the full performance of your joey, but it may well save you from glitches.Repair of the gamepad (joystick) from XBOX 360. We eliminate the backlash of the analog controller. My second channel (Video games).I will be grateful for any hardware on the dandy topic, even if the working one is broken, we will restore it together. h.if the joystick leads to the side, then this video is for you!In this rather extensive video, we will GET OUT 🙂 I tried to collect as much information as possible.Joy is very many years old, and this is the first real breakdown. And then I fixed it in 5 minutes. There are also problems when.Self-repair of the joystick for controlling electric mirrors VAZ-1118 KALINA (11183-3709810) For a group Assistance in programming, coding and configuration via remote access. Help with programming, coding and diagnostics via remote.FREQUENCY CFM210 - How to make a joystick with your own hands, joystick options.What's inside :) Joystick repair Gamepad USB 2.0 Wired Controller Black Gamepad Joypad Joypad Gamepad Regu.Quick recovery of the joystick from game consoles Dandy, Subor, Sega and other models. Any product from China.Unsuccessful attempt to repair the gamepad from the PS2 console, the crosspiece partially does not work.you can take any grease and grease the buttons.Repair of heating element, disassembly of the curling iron of the hair straightener Maestro.In this video, I will briefly talk about the reason for the need to clean the gamepad. After directly.Today I will show you how to make a useful adapter for Dandy's joysticks with your own hands, at no extra cost.I will be grateful for any hardware on the dandy topic, even if the working one is broken, we will restore it together.I will be grateful for any hardware on the dandy topic, even if the working one is broken, we will restore it together. m.In this video I will show you how to disassemble a single-lever flag mix on your own, without the help of a plumber.I will be grateful for any hardware on the dandy topic, even if the working one is broken, we will restore it together. h.A clone of the Chinese gamepad for PS3 (which is with bluetooth) broke. The L1 button stopped working. I had to break it.How to make a joystick for a PC with your own handsMost users play games using only the keyboard and mouse. But there are even more convenient (though not for all genres of games) manipulators - joysticks. In this article I will tell you about how I made myself an elementary joystick.Two years ago, surfing the endless expanses of the Internet, I came across interesting information - it is very easy to make joysticks connected to the GAME port of a sound card with your own hands. The circuit there is so simple that anyone who has ever picked up a soldering iron can assemble it. Joysticks can be divided into two types: using variable resistors or optocouplers. Here is the joystick diagram and GAME port pinout:If an optical one is made, then instead of variable resistors we use an optocoupler:On reflection, I chose the second type. I will not touch on electronics, tk. all information can be found on the internet.I have a very old console (which, by the way, has built-in games), I borrowed two joysticks from it. They are very convenient in shape, and it was not at all a pity to break.I shoved two optocouplers into one (one for forward-backward coordinates, the other for left-right coordinates). The optocouplers were removed from a mechanical mouse, which I purchased for 30 rubles. In principle, optocouplers can be bought separately, but then the costs would be impressive. The LEDs are glued to the moving part of the joystick, and the photodiodes are glued to the lower fixed part.I used the second joystick like a gearbox. Moving the joystick to the extreme positions (up, down, left, right) closes the contacts. It turns out 4 positions - 4 buttons.Just right for car simulators: up / down - gear shifting, and left / right for other needs (for example, a horn, handbrake or rearrangement for NFS). Very convenient and original :). The first joystick is connected to the GAME port, and the second to the first using a homemade port. It turns out this chain:The first joystick has one feature - no resistance, i.e. the handle moves quietly and does not return to the central position. There are pros and cons to this. On the one hand, the hand practically does not get tired, I even got used to playing with one finger. On the other hand, it is difficult to find a central position (principally in aircraft simulators).I used this design for a very long time, until my friends gave me a Logitech Attack 3 joystick.Manual assembly, of course, cannot be compared with branded models, but the price of a homemade joystick is ten times less than the price of good joysticks.Not only did I enjoy assembling and soldering, but it was also very enjoyable to play. After all, the keyboard does not have elementary things - the ability to adjust the gas and turn, which bring a share of realism and a lot of pleasant sensations into the game.
If you want to get new sensations in games, but there is no money for a good joystick, then take an example from me - make a joystick with Your Hands :).In this short article I will try to present the information necessary to understand the principle of operation of a conventional analog joystick connected to a game port on a computer. The standard game port located on the sound card serves analog signals X1, Y1, X2, Y2 and discrete B1, B2, B3, B4. Using analog signals, data on the deflection of the joystick handle is transmitted, with the help of discrete signals, data on pressing the joystick buttons. Thus, the game port was originally designed to connect two two-button joysticks. But as a rule, one joystick and additional devices are connected. In this case, the analog axes are assigned as follows:X1 - moving the handle back and forth (pitch)
Y1 - move the handle left-right (roll)
X2 - moving the pedals
Y2 - moving the engine control handle - throttle (thrust)The position of the handle, throttle and pedals is determined using stoom potentiometers: minimum resistance - extreme left (upper) position, maximum - extreme right (lower) position.In principle, you can use other potentiometers, but then the joystick will have to be calibrated quite accurately. The buttons are shorted to ground. Instead of transmitting data about the throttle position, the X2 signal can be used to transmit data about the position of the hut-type switch. This is for analog devices. The so-called digital gaming devices transmit data on the position of the handle, throttle, pedals, hut and buttons using digital protocols using discrete signals from the gaming port. The most common game port extensions and digital interface implementations will be described separately.To connect gaming devices, there is a DB15 type connector - “female” on the sound card and “male” on the cable going to the gaming devices. Above is its pinout (female DB15 connector, view from the side of contacts). Since the game port connector is often mated to a MIDI connector, pins 8, 12, and 15 can be used differently. Therefore, it is better to take power and ground from 1, 9 and 4, 5 connector pins. Below is a diagram of the simplest analog game device, consisting of a four-button joystick, RUDE and pedals. Optocouplers - an LED and a photoresistor - can be used instead of variable resistors. Such a joystick is called an optical joystick and most players prefer optical joysticks.Most users play games using only the keyboard and mouse. But there are even more convenient (though not for all genres of games) manipulators - joysticks. In this article I will tell you about how I made myself an elementary joystick.Two years ago, surfing the endless expanses of the Internet, I came across interesting information - it is very easy to make joysticks connected to the GAME port of a sound card with your own hands. The circuit there is so simple that anyone who has ever picked up a soldering iron can assemble it. Joysticks can be divided into two types: using variable resistors or optocouplers. Here is the joystick diagram and GAME port pinout:If an optical one is made, then instead of variable resistors we use an optocoupler:On reflection, I chose the second type. I will not touch on electronics, tk. all information can be found on the internet.I have a very old console (which, by the way, has built-in games), I borrowed two joysticks from it. They are very convenient in shape, and it was not at all a pity to break.I shoved two optocouplers into one (one for forward-backward coordinates, the other for left-right coordinates). The optocouplers were removed from a mechanical mouse, which I purchased for 30 rubles. In principle, optocouplers can be bought separately, but then the costs would be impressive. The LEDs are glued to the moving part of the joystick, and the photodiodes are glued to the lower fixed part.I used the second joystick like a gearbox. Moving the joystick to the extreme positions (up, down, left, right) closes the contacts. It turns out 4 positions - 4 buttons.Just right for car simulators: up / down - gear shifting, and left / right for other needs (for example, a horn, handbrake or rearrangement for NFS). Very convenient and original :). The first joystick is connected to the GAME port, and the second to the first using a homemade port. It turns out this chain:The first joystick has one feature - no resistance, i.e. the handle moves quietly and does not return to the central position. There are pros and cons to this. On the one hand, the hand practically does not get tired, I even got used to playing with one finger. On the other hand, it is difficult to find a central position (principally in aircraft simulators).I used this design for a very long time, until my friends gave me a Logitech Attack 3 joystick.Manual assembly, of course, cannot be compared with branded models, but the price of a homemade joystick is ten times less than the price of good joysticks.Not only did I enjoy assembling and soldering, but it was also very enjoyable to play.After all, the keyboard does not have elementary things - the ability to adjust the gas and turn, which bring a share of realism and a lot of pleasant sensations into the game.
If you want to get new sensations in games, but there is no money for a good joystick, then take an example from me - make a joystick with Your Hands :).Dude, thanks! Really helped! Only I took the place of foam plastic)) But it still helped. Thanks again! How to make a joystick for a PC with your own handsMost users play games using only the keyboard and mouse. But there are even more convenient (though not for all genres of games) manipulators - joysticks. In this article I will tell you about how I made myself an elementary joystick.Two years ago, surfing the endless expanses of the Internet, I came across interesting information - it is very easy to make joysticks connected to the GAME port of a sound card with your own hands. The circuit there is so simple that anyone who has ever picked up a soldering iron can assemble it. Joysticks can be divided into two types: using variable resistors or optocouplers. Here is the joystick diagram and GAME port pinout:If an optical one is made, then instead of variable resistors we use an optocoupler:On reflection, I chose the second type. I will not touch on electronics, tk. all information can be found on the internet.I have a very old console (which, by the way, has built-in games), I borrowed two joysticks from it. They are very convenient in shape, and it was not at all a pity to break.I shoved two optocouplers into one (one for forward-backward coordinates, the other for left-right coordinates). The optocouplers were removed from a mechanical mouse, which I purchased for 30 rubles. In principle, optocouplers can be bought separately, but then the costs would be impressive. The LEDs are glued to the moving part of the joystick, and the photodiodes are glued to the lower fixed part.I used the second joystick like a gearbox. Moving the joystick to the extreme positions (up, down, left, right) closes the contacts. It turns out 4 positions - 4 buttons.Just right for car simulators: up / down - gear shifting, and left / right for other needs (for example, a horn, handbrake or rearrangement for NFS). Very convenient and original :). The first joystick is connected to the GAME port, and the second to the first using a homemade port. It turns out this chain:The first joystick has one feature - no resistance, i.e. the handle moves quietly and does not return to the central position. There are pros and cons to this. On the one hand, the hand practically does not get tired, I even got used to playing with one finger. On the other hand, it is difficult to find a central position (principally in aircraft simulators).I used this design for a very long time, until my friends gave me a Logitech Attack 3 joystick.Manual assembly, of course, cannot be compared with branded models, but the price of a homemade joystick is ten times less than the price of good joysticks.Not only did I enjoy assembling and soldering, but it was also very enjoyable to play. After all, the keyboard does not have elementary things - the ability to adjust the gas and turn, which bring a share of realism and a lot of pleasant sensations into the game.
If you want to get new sensations in games, but there is no money for a good joystick, then take an example from me - make a joystick with Your Hands :).Most users play games using only the keyboard and mouse. But there are even more convenient (though not for all genres of games) manipulators - joysticks. In this article I will tell you about how I made myself an elementary joystick.Two years ago, surfing the endless expanses of the Internet, I came across interesting information - it is very easy to make joysticks connected to the GAME port of a sound card with your own hands. The circuit there is so simple that anyone who has ever picked up a soldering iron can assemble it. Joysticks can be divided into two types: using variable resistors or optocouplers.Here is the joystick diagram and GAME port pinout:If an optical one is made, then instead of variable resistors we use an optocoupler:On reflection, I chose the second type. I will not touch on electronics, tk. all information can be found on the internet.I have a very old console (which, by the way, has built-in games), I borrowed two joysticks from it. They are very convenient in shape, and it was not at all a pity to break.I shoved two optocouplers into one (one for forward-backward coordinates, the other for left-right coordinates). The optocouplers were removed from a mechanical mouse, which I purchased for 30 rubles. In principle, optocouplers can be bought separately, but then the costs would be impressive. The LEDs are glued to the moving part of the joystick, and the photodiodes are glued to the lower fixed part.I used the second joystick like a gearbox. Moving the joystick to the extreme positions (up, down, left, right) closes the contacts. It turns out 4 positions - 4 buttons.Just right for car simulators: up / down - gear shifting, and left / right for other needs (for example, a horn, handbrake or rearrangement for NFS). Very convenient and original :). The first joystick is connected to the GAME port, and the second to the first using a homemade port. It turns out this chain:The first joystick has one feature - no resistance, i.e. the handle moves quietly and does not return to the central position. There are pros and cons to this. On the one hand, the hand practically does not get tired, I even got used to playing with one finger. On the other hand, it is difficult to find a central position (principally in aircraft simulators).I used this design for a very long time, until my friends gave me a Logitech Attack 3 joystick.Manual assembly, of course, cannot be compared with branded models, but the price of a homemade joystick is ten times less than the price of good joysticks.Not only did I enjoy assembling and soldering, but it was also very enjoyable to play. After all, the keyboard does not have elementary things - the ability to adjust the gas and turn, which bring a share of realism and a lot of pleasant sensations into the game.
If you want to get new sensations in games, but there is no money for a good joystick, then take an example from me - make a joystick with Your Hands :).In this short article I will try to present the information necessary to understand the principle of operation of a conventional analog joystick connected to a game port on a computer. The standard game port located on the sound card serves analog signals X1, Y1, X2, Y2 and discrete B1, B2, B3, B4. Using analog signals, data on the deflection of the joystick handle is transmitted, with the help of discrete signals, data on pressing the joystick buttons. Thus, the game port was originally designed to connect two two-button joysticks. But as a rule, one joystick and additional devices are connected. In this case, the analog axes are assigned as follows:X1 - moving the handle back and forth (pitch)
Y1 - move the handle left-right (roll)
X2 - moving the pedals
Y2 - moving the engine control handle - throttle (thrust)The position of the handle, throttle and pedals is determined using stoom potentiometers: minimum resistance - extreme left (upper) position, maximum - extreme right (lower) position. In principle, you can use other potentiometers, but then the joystick will have to be calibrated quite accurately. The buttons are shorted to ground. Instead of transmitting data about the throttle position, the X2 signal can be used to transmit data about the position of the hut-type switch. This is for analog devices. The so-called digital gaming devices transmit data on the position of the handle, throttle, pedals, hut and buttons using digital protocols using discrete signals from the gaming port. The most common game port extensions and digital interface implementations will be described separately. Image - DIY joystick repair

# REPAIR_JOYSTICK.# REPAIR_JOYSTICK_PS_with your_hands. #DIY_CAM

# Joystick_PS3_ repair is quite often a demanded service in modern service centers. And the point here is not at all that the console itself has a low degree of protection.

On the contrary, # PlayStation_3 has all the prerequisites to be considered the most advanced console. The developers and manufacturers have taken great care to make this console as reliable as possible.

However, repairing # PlayStation_3 is still an often requested service. And the point here is not in the reliability of the set-top box, but in the features of the operation by the users themselves.

What should an ordinary user do so that # repair of the PS4 controller does not take as long as possible? First of all, observe the elementary operating rules.

Do not drink or eat near the console, and avoid spilling food or liquids on the joysticks.

Do not bump the joysticks on hard surfaces or drop them.

Store the console and all accessories so that there is no chance of accidentally stepping on the controller.

Finally, do not handle the joystick unless you are sure your hands are clean.

CHANNEL FOR CREATIVE “# DIY_SAM”:

In this short article I will try to present the information necessary to understand the principle of operation of a conventional analog joystick connected to a game port on a computer. The standard game port located on the sound card serves analog signals X1, Y1, X2, Y2 and discrete B1, B2, B3, B4. With the help of analog signals, data on the deflection of the joystick handle is transmitted, with the help of discrete signals, data on pressing the joystick buttons. Thus, the game port was originally designed to connect two two-button joysticks. But as a rule, one joystick and additional devices are connected. In this case, the analog axes are assigned as follows:
X1 - moving the handle back and forth (pitch)
Y1 - move the handle left-right (roll)
X2 - moving the pedals
Y2 - moving the engine control handle - throttle (thrust)

The position of the handle, throttle and pedals is determined using stoom potentiometers: minimum resistance - extreme left (upper) position, maximum - extreme right (lower) position. In principle, you can use other potentiometers, but then the joystick will have to be calibrated quite accurately. The buttons are shorted to ground. Instead of transmitting data about the throttle position, the X2 signal can be used to transmit data about the position of the hut-type switch. This is for analog devices. The so-called digital gaming devices transmit data on the position of the handle, throttle, pedals, hut and buttons using digital protocols using discrete signals from the gaming port. The most common game port extensions and digital interface implementations will be described separately.

To connect gaming devices, there is a DB15 type connector - “female” on the sound card and “male” on the cable going to the gaming devices. Above is its pinout (female DB15 connector, view from the side of contacts). Since the game port connector is often mated to a MIDI connector, pins 8, 12, and 15 can be used differently.Therefore, it is better to take power and ground from 1, 9 and 4, 5 connector pins. Below is a diagram of the simplest analog game device, consisting of a four-button joystick, RUDE and pedals. Optocouplers - LED and photoresistor - can be used instead of variable resistors. Such a joystick is called an optical joystick and most players prefer optical joysticks.

Connection of 2 computers with laser pointers.
The device is powered by a COM port. Phototransistor - any of the domestic ones, for example, type FT-2, resistor R1 - in the range of 5-10 kOhm. Diodes - D522. Capacitor 10μF x 10V. In a good way, it would also be necessary to implement a normal limiting scheme for a laser diode. Since the circuit does not convert RS232 to SIR, the range is in the order of a hundred.

Regulated PSU from a computer power supply
This topic repeatedly pops up on various pages of radio engineering literature. As you know, a "good" power supply is one of the basic tools of a radio amateur. The word good means an adjustable block with an output voltage from 0 to 25 V and a current up to 5A. Industrial designs are quite expensive and not everyone can afford it, but in the manufacture.

PSU for transceiver from computer PSU AT / ATX
Step-by-step instructions for converting a computer power supply for use with a transceiver. 1. All parts for -12, -5 and +5 volts must be removed. I removed the diodes, capacitors, choke windings and pull-up resistors for these voltages. All this takes up a lot of space. 2. Rewind the +12 volt coils with a thicker wire.

Video (click to play).

Alteration of the computer power supply unit for the transceiver.
I took out two old power supplies from computers and decided to experiment with them. The blocks bore the inscription: DTK Computer model PTP-2008. 200 Watt Output. PSUs had outputs.

Rate the article:

Grade 3.2 who voted: 84