DIY electric oven repair

In detail: do-it-yourself electric oven repair from a real master for the site my.housecope.com.

No matter how expensive and high-quality household appliances are, they can malfunction during prolonged or improper use. This also applies to electric ovens. Even such well-known manufacturers as Whirpool, Combustion, Ariston, Electrolux and Bosch cannot guarantee the smooth operation of their products in a variety of conditions. And if the warranty period has already expired, then you will need to repair the ovens yourself.

In the event that the oven breaks down, and the warranty is still valid, then you should contact the service center or the trade institution where the equipment was purchased for help. After writing the application, the master must come to the indicated address to inspect the unit. In the event of a simple breakdown or the presence of the necessary spare part at the master, the device can be repaired at home. If we are talking about more complex cases, then the service center takes the oven, undertaking to return it within 45 days without any defects and malfunctions.

If the breakdown was not the fault of the owner of the oven, and the master could not completely eliminate it, then the company is obliged to exchange the appliance for a new one. As a rule, all well-known manufacturers, including Whirlpool, Combustion, Ariston, Electrolux and Bosch, provide a warranty period for their own products from 2 years.

However, even with a valid warranty, free repairs will not be performed in the following cases:

Failure occurred due to voltage drops.
Malfunctions are associated with an initially incorrect connection of the oven.
The device broke down due to rodents or insects that entered its interior.
If the unit has traces of self-repair or opening - all kinds of scratches, solders or abrasions. In this case, the repair of electric ovens will be paid, even if the breakdown is associated with a manufacturing defect.

Video (click to play).

If the warranty has already expired or the malfunction has occurred through the fault of the owner himself, then the repair of built-in ovens can take place in two ways - by professional craftsmen or by hand, as shown in the video.

First of all, you will need to independently determine the cause of the malfunction. If we are talking about a simple breakdown, then you can eliminate it with savings for the family budget with your own hands. If we are talking about replacing an expensive spare part, then it is worth entrusting such a responsible work to a specialized service center.

Most often, repair of Ariston ovens and other manufacturers is required when the following breakdowns occur:

Problems with heating elements. If the dish is cooked for a long time at the maximum temperature, and at the same time one side of it is much paler than the other, then we can talk about malfunctioning of one of the heating elements. It is very simple to identify such a breakdown with your own hands - you just need to turn on the electric oven for a couple of seconds, and then touch the heating elements with your hand wearing an oven mitt. If they do not heat up, then they need to be replaced with a new part. As a rule, spare parts of this kind are inexpensive and can be replaced with your own hands.

The thermostat is broken. If all the heating elements work correctly and the temperature is set correctly, the dish has not baked even after a long time? We can talk about a malfunction of the thermostat.It is quite problematic to identify such a breakdown on your own, so it is better to immediately call an experienced master.
Errors displayed in codes. As a rule, the Whirlpool, Combustion, Ariston, Electrolux and Bosch units with an electronic display are supplemented with a self-diagnosis function, as shown in the photo. If there are failures in the system, information about them in the form of symbols will appear on the monitor. Each manufacturer uses its own codes, which are necessarily prescribed in the instructions for the technique. Whatever error is displayed on the screen, you can fix it yourself, while following all the advice written in the instructions.

Owners carelessness. It often happens that the resulting malfunctions in the operation of equipment do not require repair of the electric oven. These can be power failures or accidental disconnection of the unit from the power source, the oven door is not completely closed. All these little things can bring the owners of household appliances a lot of problems, since, without trying to independently determine the cause of the failures, they immediately call the master to the house, whose services will need to be paid.
Other types of breakdowns. Also, electric ovens may need to be repaired if the timer breaks, damaged contacts, etc. In such a situation, it will not be possible to fix the problems on your own, since professional skills and special equipment are needed to eliminate them.

It is possible to repair built-in ovens with your own hands, but if we are talking about complex breakdowns, then it is much wiser to entrust their elimination to specialized service centers. Otherwise, amateur performance may end up with more complex problems, which will be more expensive to fix.

Modern ovens break down quite rarely, but problems in their work are not excluded. The difficulty is that the structure and all its elements do not provide for outside interference. Repairing ovens at home is usually done by replacing components and is carried out in most cases by an experienced craftsman. However, in some cases, breakdowns can be repaired by yourself.

If you decide to try to repair the oven with your own hands, then it is worth knowing the situations when this should not be done. There is definitely no need to open the case if:

the electric oven is under warranty;
the oven information panel shows that the problem is a complex component breakage;
you know nothing about electrical engineering.

During the warranty period, all repairs are made is free... Except in the following cases:

There are traces of attempts to open the structure - worn out or damaged heads of bolts, self-tapping screws, removed seals.
Insects or rodents have entered the oven, causing a short circuit or mechanical damage to components and wires.
The connection was made incorrectly, without following the manufacturer's recommendations.
Damage to electronic components occurred due to a change in voltage parameters, as a result of which it went beyond the critical limits specified by the manufacturer.

In all cases where the warranty is canceled, repairs will have to be paid in full... The same situation occurs when the warranty period expires.

Before grabbing a multimeter, putting on gloves, and pulling out a set of screwdrivers, it makes sense to check the power supply to the oven. It is worth looking for answers to the following questions:

Is food served?
Is the power cable OK?
Is there good contact between socket and plug?
Are there traces of carbon deposits, melting on the plug and socket?
Is the fuse for the plug or oven broken?
Is the power wire in perfect condition, is there any fractures, scuffs or melting on it?

Read also: DIY Volkswagen Polo repair

Checking the fuse in the plug

If the above problems do not exist, and the oven still does not start, it is worth checking the device for standard faults.

Consider typical malfunctions, methods for diagnosing them and the necessary repair of electric ovens at home. As mentioned above, most of the troubleshooting work involves replacing assemblies and parts.

If the electronic control unit of the oven suddenly fails, then be prepared to pay a tidy sum for repairs. In most cases, you do not need to do anything to identify this problem. Modern oven models are equipped with self-test system: The electronics will send a signal by itself by displaying an error code.

Do-it-yourself repair of the control module is possible only if you have experience and knowledge in electronic technology.

Parts are replaceable and can be ordered from the manufacturer's catalog. For users who prefer to get a baked chicken out of the oven, rather than electronic boards, it is better to call a qualified technician.

If this is not possible, or the qualifications of the service personnel do not inspire confidence, you can order a control unit wholly... This can be done on the manufacturer's official website or in a specialized online store. It is usually not difficult to install a board in place of a burned-out one.

Most modern models equipped with mechanical regulators do not provide for disassembly and cleaning. Primary repair consists in removing contamination from the outside, removing contact leads and cleaning the terminal plates on the regulator or timer. If this does not help or does not help fully, the part should be replaced.

Some older models allow cleaning of mechanical regulators, after which the latter work perfectly, without any complaints. It is necessary to carry out maintenance using non-aggressive solvents, for example, white spirit or a weak solution of ammonia. It is necessary to clean off oxides from contact groups with a very fine sandpaper; to eliminate traces of corrosion, special primers are used.

Oven mode switch

This is a part that is often changed, including when the gas ovens are being repaired. No interference in the design of the device is provided. The entire element is replaced.

Air blower and grill fans no longer create a good air flow over time. If the engine is running, the impeller should be cleaned. Dust constantly accumulates on it, while grease and oil are on the blowing fans.After a certain period of operation, it is imperative to disassemble the oven and lubricate the engine, if this is provided for by its design.In the event of a blower failure, rewinding or other repairs are simply unprofitable - the entire unit is replaced. Do the same with the grill motor. It is placed in a non-separable housing together with a gearbox.The heating elements of the oven are constantly working in critical mode. Determining whether the heating element is working is quite simple. To do this, turn on the oven to the appropriate heating mode and check the temperature by touching your hand in a kitchen mitten. The method works, however, for a more accurate result, it is better apply a pyrometer... The device will clearly show the uniformity of heating over the area, indicate the maximum temperature in a given mode. This will make it possible to diagnose the "burnt" heating element not only completely, but also partially.Heaters are replaced after disassembling the case; it is not difficult to buy the corresponding part. The specific marking can be found after removing the heating element or according to the reference data of your electric oven model.The last three elements, which change without hesitation or hesitation, are the backlight, thermal fuses and a touchscreen film panel. All of these parts cannot be cleaned or repaired.The oven electronics will inform about the operation of the thermal fuse in emergency mode, and problems in the operation of the film touch panel are diagnosed by the lack of reaction, the need to exert excess pressure, and accidental operations. The backlight lamp can be replaced independently, but to install new thermal fuses or a film sensor, it is better to contact the master.

If the oven turns off spontaneously during cooking, then there can be only one reason for this - failure of the thermostat... Regardless of the type of thermostat, it is replaced with a new identical part.

Long-term trouble-free operation of the electric oven is possible only if the requirements set out in the instructions for use of the products are observed, and taking good care of her after every cooking... In this case, it is recommended to wash the oven chamber with warm water with the addition of a small amount of dishwashing liquid. At the end of the oven treatment, the inner surfaces must be wiped dry.

Important! When cleaning the glass surfaces of the electric oven, do not use cleaning agents containing abrasive additives.

DIY oven repair

Mode switch.

Temperature regulator.

Upper ten.

Round ten.

Lower ten.

Internal glass.

Ventilation holes (cooling).

Upper grill.

Door handle.

Inner body.

Electronic control module.

Ventilation holes (cooling).

Run-time timer scoreboard.

Cooling fan.

Convection fan (side view).

DIY oven repair. The latest models of ovens are equipped with an electronic control module.The task of the control module is to control the operating modes of the functional units of the oven, according to the cooking program set by the user.

The cooking mode is selected.

The required cooking temperature is set.

The total cooking time interval is selected.

The oven door closes and the process starts.

The electronic control module executes the instructions according to the selected program. The processor compares the readings of the sensors and, according to the readings of the sensors, controls the operation of the peripheral devices of the oven (electric oven).At the end of the program, when the program is completed, the control module will sound or beep to inform you that the cooking process is complete. How to independently repair household appliances with your own hands.The choice of modes or cooking programs, on some models of ovens, is set using the touch control panel, on others using program selectors.

Read also: DIY pneumatic wrench repair

But the essence does not change from this. An image of the electronic control module for the oven can be seen in Fig. 4.Modules may differ in appearance, dimensions, depending on the manufacturer of the oven. For example, the electronic control module (control board) may look like the image below:example of the image of the control module.The upper ten in fig 4, consists of two tens: inner and outer.The inner ten is switched on if you have selected the "Grill" cooking mode.In Figure 1, the top ten is labeled 3.The lower shade of rice 5 is usually located under the lower casing of the inner case of the oven (electric oven). In Figure 1, the lower ten is designated at number 5. Genuine parts for the electric oven.Round ten fig 6, located under the shroud of the rear of the inner case in the center. In Figure 1, the round ten is numbered 4.Round ten is switched on in cooking modes in which convection is provided, and usually in tandem with a convection fan, rice 2 position 15.In order to successfully repair an electric oven or oven on your own, it is easy to find and fix all possible breakdowns. Purchase full main course: Oven repair.

Book: how to properly connect an electric boiler.

Book: electric stoves, hobs, electric ovens - typical malfunctions.

Video lessons: How to repair an oven.

Built-in electric oven Hansa BOEI64030077
We have been using this oven for about 5 years. True, for a long time during cooking there was a smell of burnt plastic or something else, as when turning on a new technique. In general, everything was fine, but just the other day it stopped turning on at all, only the clock is on. After reading the information on the Internet, I decided to inspect the operating mode switch myself, since it is not difficult to get to the control unit. And what did I see? On the first contact (two red wires), a malfunction of the contact group occurred as a result of overheating, which is visible by a change in the color of the plastic, i.e., blackening. After removing the switch, disassembling the burnt group, I was very surprised to see that the power contacts were not soldered, but assembled by means of a clamp, therefore, I think they did not contact very well and heated up more and more over time. Then they weakened so much that the movable part of the contact group simply jumped off and the oven stopped turning on. I cleaned the contacts, soldered the assembly part ("daddy"), inserted it into the socket and mechanically secured it with a bracket, drilling two 1mm holes. In the future, I want to fix the contact with epoxy glue, since it is not afraid of temperature. I assembled the switch, put it in place and it worked.I am an electrician by profession. In my free time I am engaged in the repair of household appliances with friends, relatives, and friends. Now household appliances have become more modern, new technologies have been introduced. I have carefully studied these training materials, copied, printed. They help me a lot in my work! I also ordered some useful books on home appliance repair.When an oven appeared in our house, I thought it was nothing special. Confused only by the touch panel, I am not particularly versed in electronics. But as always, what you are afraid of happens. The touchpad has stopped responding to pressure. Only after looking at this material, I decided to disassemble the oven. Step by step I got to the control module and cleaned it. Then I checked it without glass and with glass, everything worked. Without these materials, I hardly decided on such an adventure.The other day, I had to deal with the repair of the Dream electric stove, more precisely, with the repair of the oven of this product.According to the stories of the owners of this miracle, the stove periodically lives its own life, then one burner does not work, after a while it starts working, but the other does not react. The oven diligently fed her household for the New Year holidays, and at Christmas she flatly refused to bake a goose. In this state, I found her. On turning on the oven, the stove reacted only with the illumination of the oven, to give heat, and even more so to bake pies, she categorically refused.Arriving on a call, I did not particularly prepare for the global repair of the Dream 12-03 electric stove (by the way, the principle of disconnection with other models is similar).He took with him a travel box with the necessary tools and went to the application.A cursory examination of the main electrical connections of the cooker yielded no results. Everything was in place and in a very satisfactory condition. OK. Lack of quick results is also a result. Then I went along the standard chain from the power input distribution terminals. In the course of the chain, I checked the thermostat of the Dream electric stove - without any complaints, and slowly but surely following the visual scheme, I got close to the power switch PM-16-5-01.The fact that zero did not pass through it, I realized right away, but I did not remove the switch, nor did I solve the puzzles of the zigzags of the five-speed switch, deciding to be prepared and creatively approach the process.As well as detecting a malfunction of the Dream electric stove oven from a swoop, I could not find a connection diagram for this miracle of technology. But I found it more important, the operating modes of the five-pin power switch. With regards to the scheme of the Dream electric stove, the issue was resolved as follows. Although visual, and most importantly before me, I had a diagram that was not violated by anyone, but having made a request to the manufacturer, to my surprise, I quickly received an answer, and then a wiring diagram of an electric stove Dream 12-03, for which special thanks to the manager Natalia, from this production.Armed with the circuits, I made a second attack on the repair of the electric oven Miracle Cooker Dream.My initial assumptions were confirmed, the malfunction was hidden in the oven mode switch, and more specifically, two contacts from heating "floated" to the side, and the contact plates had a reddened appearance from overheating. Verdict - the power switch of the Dream oven modes, for replacement.But, since in our city, there were no such switches available, only on order, at the request of the owners of the stove "to do at least something", the outgoing contacts were restored to their place by heating, and the contact surfaces themselves were cleaned of carbonization with alcohol, (fortunately, their surface was not damaged by burning).Alternatively, for the temporary working capacity of the PM-16-5-01 power switch and others from the same series, if the "burnt" contact is deformed by temperature and does not close the contact plate, it can be bent. It will not be possible to do this locally, but by removing the contact group from the case, having previously pulled out the contact jumper holding it (indicated by the arrow in the photo), it is possible to bend it.

At the same time, taking into account the temperature deformation and weakening of the metal, take the bending angle by 20 degrees more than the adjacent working contacts. Before installing the switch on the Dream electric stove, make sure that, according to the operating modes, the "treated" contact closes the group, and in other modes there is a visible break.

It is difficult to give a guarantee for such a repair of the Dream electric stove, but until the arrival of a new power switch, it will definitely last.

At the end of my description of repairing an electric stove, I will lay out all the diagrams that I managed to find on the network and those that were sent by the manufacturer (by the way, in my case, the actual installation was different from the factory diagram).

Scheme of contact groups of the power switch PM-16-5-01

This is how the oven switch itself (and the burners) of the Dream electric stove looks like:

Electrical diagram of an electric stove with a Dream oven (although it is two burners, but the wiring of the oven switch is the same.

Wiring diagram of electrical connections of the electric stove Dream 8

Wiring diagram of electrical connections of the electric stove Dream 12-03

Electrical diagram of a two-burner stove with an oven model "Dream 221Ch"

And just in case, suddenly someone wants to read:

Despite the fact that gas is much cheaper than electricity, many housewives choose combined (hybrid) stoves. That is, the burners run on gas, and the oven runs on electricity. With all of their

advantages, such a stove, namely an oven, has one serious drawback. After several years of operation, in direct proportion to age, the probability of failure of the heating element (heating element) begins to grow.

Imagine that you "conjured" a dough with a filling and put the pie in the oven to bake, or you collected a decent amount of Ivan tea, twisted it, fermented and placed in the oven to dry. And suddenly the heating element burns out, usually the lower one. If it will still be possible to try to dry Ivan tea in convection mode on the upper heating elements, then the cake will most likely have to be sent to the trash can.

To avoid this situation, it is better to take care of a spare heating element in advance. In addition, having bought it in advance, firstly, you can save on its cost. Secondly, buy not an analog, but an original heating element (from ARDO it is from the Italian company TERMOWATT). Thirdly, you will be able to save the cake, or Ivan-tea, since replacement will require a curly PH2 (Phillips) screwdriver and a few minutes of time. Below is an example of replacing the lower heating element of an ARDO combi cooker.

First, we turn off the power to the oven, that is, we pull out the plug from the socket. Then, unscrew the 4 self-tapping screws of the rear wall

and remove by slightly releasing it down.

Now we disconnect 3 terminals from the heating element. Black wire "0", brown "phase", yellow-green "ground".

Usually, the heating element fails with a characteristic crackle and severe redness at one point. There are cases of burning through the lower part of the oven. If, nevertheless, there are doubts about the malfunction of the heating element. You can call it with an ordinary multimeter. The resistance of a serviceable element is calculated by the formula R = U 2 / P, where U is the mains voltage, P is the power of the heating element. 220V 2 = 48400. 1600 W - power of the heating element of the ARDO electric oven.

We divide 48400 by 1600 we get 30.25 ohms. That is, the estimated resistance will be 30 ohms with an error of approximately 5 ohms.

We put the multimeter switch in the 200 ohm position and check the resistance between the contacts. The photo below shows the resistance value of the new heating element.

Then we put the switch in the dial mode

and check both contacts for a "short circuit" relative to the case. The value on the multimeter screen should not change.

We turn off 4 more self-tapping screws for the lower heating element and remove it outside.

It remains to unscrew two nuts

and a new heating element can be put in place of the burned-out heating element. The oven is assembled in the reverse order.

If the article was useful, do not consider it a work, share on the social network: In case of technical malfunctions, owners of electric stoves can independently search for and repair breakdowns without the help of a master. It is forbidden to repair some malfunctions of electric stoves on your own, since an electric stove is a household appliance of increased danger and with unskilled intervention there is a risk of getting an electric shock. Western manufacturers of stationary electric stoves, such as Bosch, Hansa, Gorenje, Beko, include a section of guidelines for troubleshooting possible problems in the operating instructions. If the manual is not available to you, download it from the official sites.Attention: when servicing and repairing electric stoves, it is necessary to observe the precautions established by the current rules of safety and operation of electrical installations. It is permissible to repair, replace and inspect internal installation elements only when the electric stove is turned off and disconnected from the network.Any kind of checks of the switched on electric stove in damp clothes and shoes, barefoot, with wet hands is prohibited.The electric hob and its components are not included. The cause of the malfunction: the contact of the plate connection is broken; the socket is burnt out; the burner spiral is partially burnt; the burner burned out. Remedy: The first step is to check the power source of the stove, namely the outlet.Make sure all fuses are intact. See if the automatic switch has turned off; check the cord and wire if it is broken, replace it; for professional testing of the burner, invite an expert to your home. The most common technical malfunction is a broken contact of the connecting cord. For verification, open the junction box of the electric stove, visually inspect for a break. Next, a tester is used to check the integrity of the cores of the cord. If the connection cord is serviceable, proceed to the check and possible replacement of the switch and the burner.The ceramic or cast iron hob does not turn on. The cause of the malfunction: a nichrome thread or one of the spirals burned out; defective switch. Repair method: replace the switch or hotplate.Analysis of the reasons for the failure of electric stoves showed that most of the breakdowns of an electric stove are due to the power switch. In the switches that go to the complete set of electric stoves with a ceramic burner, during prolonged operation at high temperatures, residual deformation of the springs of the moving contacts appears, which causes a weakening of contact presses and subsequent burning of the contacts. In switches, camshafts often fail, contact pressure springs break or lose their elasticity. To eliminate these disadvantages, it is necessary to tighten the clamping screws, remove carbon deposits from the contacts.

The oven does not heat up (heats poorly and unevenly). The reason for the breakdown: the heating element (tubular heating element) is out of order. Remedy: replacement with a new one.The outer shell of the heating element is traditionally made of low-melting metal alloys with good electrical insulating and heat-conducting properties. This imposes certain technical restrictions on the operation. This metal does not have mechanical strength and corrosion resistance, therefore heating elements quickly fail due to serious damage to the tube. A damaged tubular electric heater belongs to the category of non-repairable products, in case of mechanical failure, it is replaced with a new one.The electric stove turns off after turning on the oven. Cause of malfunction: short circuit in the electrical circuit. Remedy: replacing the heating element, searching for a damaged wire.Frequent breakdowns and malfunctions of heating elements occur due to weak insulation. This leads to blown fuses or to the activation of the automatic switch. Try turning the circuit breaker back on or replacing the blown fuse. If, after replacing and turning on the oven, the fuse blows out again or the machine is triggered, turn off the power to the electric stove and do not use the oven until the master replaces the new heating element.The oven does not heat up or gives a low heat. The cause of the malfunction: the thermostat was calibrated, the heating element was partially burned out. Remedy: diagnostics and replacement.The operation of the thermostat is calibrated over time, this leads to the shutdown of the heating element at a low cooking mode, without reaching the initially set value. In this situation, the service technician changes the thermostat. However, this breakdown is characteristic of a faulty heating element. Technical breakdowns and malfunctions of oven elements are determined using an ammeter. Check the performance of the heating element, or better, invite a master to repair the ovens for correct diagnostics.The upper heating element is defective (increased cooking time). The electric stove has been one of the main helpers in the kitchen in cooking for more than a dozen years. From year to year this miracle of technology is being improved, new models appear, significantly superior to the old ones. However, they have common basic mechanism and operating rules, and therefore common mistakes that people make. It is these violations that most often become the causes of electrical breakdown, and not the expiration date of the parts.A short circuit between the body of the device and the heating element or pin of the output contact, poor contact between the output pin and the end of the heating element attached to it are also common among breakdowns of electric stoves. This can happen if objects that are too heavy are placed or thrown on the hotplates, as the surface deforms; an uneven bottom of the cookware will only increase the detrimental effect on the heating elements.It is not uncommon for a connecting cord and plug to malfunction as a result of rough handling. The wire most often breaks down where it connects to the plug, since the owners of the plates often bend it in this area. Another common mistake is when people unplug the plug from the outlet by grasping the cord and not the plug, thereby disrupting the electrical connection between the wire and the plug's contact pins.In my practice, there were a lot of damaged electric stoves, and for the most part the reasons for the breakdown were not wear of parts or a defect in production, but careless, sloppy, irrational use. The electric stove can rightfully be called a real helper in the kitchen, so treat it with due respect and it will serve you for many years. If a breakdown occurs, then do not rush to unwind this miracle of technology yourself and try to fix it; a person without appropriate qualifications is unlikely to be able to improve the situation for the better.Leading specialist of the company Fedin Alexey.Undoubtedly, the most important household appliance in the home is the electric stove. Without this electric "hearth" it is difficult to imagine the home of a modern person. Household appliances are periodically updated, becoming more advanced and smart, capable of automatically supporting various cooking modes and reporting readiness. All such innovations are the result of the increasing complexity of the internal components of the electric stove in order to make the operation more convenient and simpler. More and more electric cookers on the modern market are touch-sensitive. Less and less you can notice the stove in the classic version, where rotary switches were used to adjust the power of the burners. The burners themselves have undergone significant changes; they are less often made of cast iron, representing an open spiral under the glass. A significant disadvantage of these innovations is the demand for products for periodic maintenance and the complexity of repair in case of breakdowns. Minor deviations from operation can cause various malfunctions.The operation of the burner without the cookware installed - leads to rapid wear of the burner. When the burner is idle, there is no full absorption of thermal energy and the burner uses up its resource faster.Long-term operation at maximum power - burnout of heating elements, switches, wiring. Extreme temperatures should not be present for a long time, as the heat spreads to neighboring elements.Shocks and mechanical deformations - can lead both to cosmetic defects and to disrupt the performance of internal elements.The company of professional craftsmen "PLITEXPERT" is engaged in the repair of electric stoves of all foreign and domestic brands:If you didn’t find the brand you are looking for in the list, please give us a call.What do you encounter most often?

Video (click to play).

Life in Moscow flows at an accelerated pace, most people are constantly busy, it is sometimes extremely difficult to devote time to repairing an electric stove. We perfectly understand the inconvenience of the process of delivering equipment to the service, so we take all the trouble on ourselves. Masters of "PLITEXPERT" independently go to the house, where the repair takes place, you just need to choose a convenient time. We work without weekends and holidays, the masters can arrive after your working day, by prior arrangement.