In detail: do-it-yourself repair of eurosob 1000 from a real master for the site my.housecope.com.
Washing machines of this brand are quite reliable and economical. But even the most reliable car needs repair. Especially often in such machines there are problems with the loading hatch. After all, compact washing machines are not bought from a good life and are usually installed in extremely cramped conditions. Therefore, frequent contacts of the loading door with walls or other objects lead to failure of the door lock. And careless handling of the hatch sometimes leads to the destruction of the glass of the door.
With regard to glass, such malfunctions allow themselves to carry out diagnostics visually without special training. Roughly speaking, it is easy to see. And the lock does not require special knowledge for self-diagnosis. When the door is tightly closed, you need to try to open it without pressing the handle button. If the hatch does not open and the indicator near which the key is shown is on, then there is a problem with the lock.
Performing self-repair of a Eurosoba washing machine for a person without experience is fraught with many difficulties, but they can be avoided if you follow a number of simple recommendations:
1. Before starting repairs, disconnect the washing machine from the water supply and power supply.
2. Drain the remaining water from the tank by lowering the drain hose to the floor and placing a flat container on it. If there is not much water, you can drain it directly onto a rag and then wring it out.
3. Despite the small size of the washing machine of this brand, it is better to make repairs not in the bathroom, but in a more spacious room with good lighting.
4. To disassemble the washing machine, you need to prepare some kind of dish or box for small parts. The loss of one self-tapping screw will force you to waste time and money on its purchase, and this is extremely undesirable if it has already been decided to save money on repairs.
5. Self-repair of the Eurosoba washing machine must be carried out with the maintenance of a "journal" in which all actions taken will be recorded. It is advisable to number parts of the same type. This will greatly facilitate reassembly.
6. Before removing the faulty unit, it is advisable to photograph it. Having a photograph of the position of, say, an electric motor, there will be no unnecessary questions later.
Video (click to play).
The ideal option would be to film the repair of Eurosoba washing machines with your own hands on video. The chronicle of the disassembly operations performed will allow you not to make mistakes when assembling. And the finished film can help people with the same problems if you put it on the Internet. Some even manage to make money on such video products.
The main mistake when self-repairing Eurosoba machines, like other brands, is an irresistible desire to replace a part that is allegedly out of order. This is not entirely correct. For example, for the hatch lock, which was discussed above, sometimes it is enough to remove the front panel and eliminate the defect in the connector contacts. From inaccurate closing of the door, constant vibration and high humidity of the environment, the contacts depart, burn or oxidize. The elimination of this minor defect often gives the desired result and allows you to really save on self-repair of the automatic washing machine.
If, nevertheless, there is confidence in the need to replace the damaged part, then the purchase must be made with a sample in hand. You should buy only original spare parts that fully meet the technical requirements of the manufacturer.
Therefore, the meaning of do-it-yourself repairs is definitely there.You can save a lot of money, but you certainly have to sacrifice personal time.
Euronova (Eurosoba) washing machines are assembled in Austria, so they are of enviable quality and excellent technical characteristics. In Russia, they are better known as "Porsche Baby".
Evronov's cars are usually designed for 14 years of operation. 80% of all units are developed by the manufacturer - Eudora Gmbh.
SMA are individually tested at every stage of production. If they break, it is usually due to violations of the operating rules and external factors:
poor quality water;
voltage drops in the network;
low quality powders.
Today we will consider the main malfunctions of this brand and tell you what to do if the Evronov washing machine (Evrosoba) breaks down.
Thanks to the high manufacturability of machines equipped with a self-diagnosis system, users will find out about failures immediately - by fault codes.
Consider the error codes that the Evronov machine gives out and their meanings:
The door lock is broken or the microswitch is out of order. The first thing to do in this situation is to check if the hatch is tightly closed. Then check the condition of the lock.
Waste water drain does not work. Most often, the pump impeller is to blame for this. It can become blocked due to scale, detergent deposits and blockages in the sewer system.
Water is not poured. Reasons: the water supply valve is blocked, insufficient pressure in the water supply system, clogged water inlet filter, breakdown of the inlet valve.
Occurs when the residual water level exceeds the norm. The tightness of the water inlet valve may be compromised.
Indicates a breakdown of the temperature sensor (thermistor).
The code indicates the absence of water heating. The electric heater (TEN) could fail.
This error occurs when too much water has entered the tank.
Error in the motor or tachometer (tachometer, tachogenerator).
The code speaks of a thyristor breakdown.
Displayed when there is a fault in the interlock circuit.
A rare error means a violation of the pump circuit.
If the washing machine starts leaking during washing, you can figure out the problem and repair it yourself. Leakage reasons:
damage to the cuff of the hatch;
household cleaning products of poor quality;
blockages in the system;
breakdown or crack in the tank;
breakage of the filler valve, water level switch and other parts.
Important! You cannot operate the machine if it is leaking. Having found a leak, immediately disconnect the CM from the network until the malfunction can be eliminated.
This breakdown is most typical for the Euronova 600, Euronova 800, Euronova 1000 models.
In this case, do-it-yourself repair is to eliminate the causes of blockages that could cause a leak.
Check the drain hose. Small items can be hammered into it, falling out of the pockets of clothes during washing.
Check the hatch. In it, the latch may be broken or the sealing elastic - the cuff damaged. If the cuff is clogged - clean it, if there is a slight damage - you can seal it with a rubber patch, and if the damage to the cuff is too strong, replace it.
When starting up, the machine may not pick up water, so it will not start washing. This can mean both a software error and the failure of one of the nodes.
Try to find out for yourself what caused the failure:
There may be no water in the water supply system. To test this, simply turn on the tap in the bathroom or kitchen.
There is water, but there is not enough pressure in the system to create a normal head. The machine either does not collect water at all, or it does it too slowly. In this and the previous case, it is worth waiting until the water supply is normalized, or call a plumber.
If the door is not closed tightly, the command unit does not give a signal to start the washing program, so no water is drawn. Perhaps you just closed the hatch loosely.Other breakdowns may also occur: failure of the hatch blocking device (UBL), breakage of the guide door or the handle itself. In this case, you will need to replace one of these elements. You can carry out the repair yourself - for this you just have to find the instructions and see how to remove the UBL or disassemble the door to replace the handle or guide.
A clogged filter on the inlet hose can also block the water supply to the tank. To clean the filter, you need to turn off the water supply valve on the pipe, disconnect the hose at the point of its attachment to the washer body, remove the filter with pliers and wash it. Inspect the hose at the same time, there may be a blockage in it too.
The reasons that your washing machine has stopped the wash program (while there is still water in it) may be the following malfunctions:
Water drain filter clogged.
Breakdown of the drain pump (pump). If the matter is in the pump, then you need to disassemble the machine, remove the pump, clean and rinse it. In difficult cases, the masters change the pump to a new one.
Breakdown of the control board. It is always better to entrust the repair or replacement of this unit to specialists.
This is not the most frequent breakdown for this brand, but it is not excluded due to the high hardness of water in our plumbing systems.
Important! This is a critical error. As a rule, it arises due to the fact that the heating element is overgrown with scale, due to which heat does not enter the tank. As a result, the heating element overheats and burns out.
Short circuit possible! Unplug the machine until you locate the breakdown.
Usually, in this situation, it is necessary to disassemble the washing machine, check the thermoelectric heater with a tester and then replace it. Replacing the heating element in Evronov's typewriters is not much different from a similar repair of other brands of typewriters.
As a rule, overheating of water in Eurosob or Evronov machines occurs for a number of reasons:
The thermistor (temperature sensor) is out of order. The solution to the problem is to replace the sensor. The sensor is built into the heating element, so when replacing it, you can at the same time clean the heater from scale.
Thermostat breakage or malfunction. Replacement is also required.
Shorted the wires between the control module and the thermostat. You need to re-solder the contacts.
Software glitch. It can be eliminated only by reprogramming, repairing or replacing the electronic module.
The first thing you can do yourself: check if you have accidentally set the heating mode "Boil" or have not chosen a program in which the wash is carried out at 95 degrees.
If this is excluded, it means that you will need a radical elimination of the breakdown. Perhaps this video will help you:
If the machine does not work, then the fault codes do not always appear. This is a difficult situation for the user, because it is not clear what caused the work stoppage and what to repair.
The reasons can be determined by the signs accompanying individual malfunctions:
The machine does not respond to pressing the ON start button. In this case, the start lamp may light up, but the process does not start.
Complete lack of response to the "ON" button, while the power indicator does not light up.
If the lights and numbers flash randomly, this confirms the problem.
As a result, you can diagnose several breakdowns:
Failure of the START button.
Open in the electrical circuit of the washing machine.
Software failure, breakdown of the control board.
You can do the following yourself:
Check if your machine is plugged in.
Check that the power cord, plug and socket are operational. To check the latter, use a screwdriver with an indicator or a working electrical device.
If all of the above is in order, serious repairs are required - soldering or replacing the start button, restoring the integrity of the internal wiring of the Evronov's CM, and maybe even repairing or replacing the electronic module.
If you have lost the instruction manual, we will inform you of the possible breakdowns listed in the user manual. The manufacturer is sure that these failures occur in Evronov's machines most often:
The drum does not rotate and functions are not performed. This may be due to the fact that there is no electricity supply, the hatch door is not tightly closed, the program is not selected, or the selector ring is in the "0" position.
The machine does not wring out. The first reason: the laundry has got confused in a large ball, which is why spinning is blocked. Second reason: you have set the "No Spin" mode.
The powder does not enter the tank (or is not taken out of the cuvette to the end). Perhaps you have chosen the wrong program, or the powder has strayed into lumps.
The washing machine does not wash the laundry. The first possible reasons are too much or too little powder, or the wrong temperature or program.
The machine tears the linen. This is often due to foreign objects entering the tank.
By adhering to the rules of operation, you can avoid and prevent most of the failures and breakdowns of the Evronov machine.
Frequent malfunctions of the Eurosoba 1000 washing machine:
