DIY soccer ball repair

In detail: do-it-yourself soccer ball repair from a real master for the site my.housecope.com.

With a great love for various ball games, constant use of equipment, unexpected damage occurs. It is not always possible to replace a damaged ball. How can you temporarily restore its functionality? It all depends on the type of ball.

For example, a plastic table tennis ball is damaged. This is fixable. The dent is removed by dipping the ball into hot water. As a result, the air in the tank will heat up and the body will straighten. A crack in the ball can only be repaired with celluloid. For this, a piece of plastic is taken, which can be taken from an old ball, and placed in acetone. The resulting solution is used to seal the crack. After hardening, the irregularities are removed with fine-grained emery paper.

If a basketball is damaged, then you need to estimate the size of the punctured place. Sometimes the hole is microscopic, but the air is still blown away. Use soapy water to detect the problem. It is applied to the intended siphon and the ball is compressed slightly to check for bubbles. It is best to let all the air out of the ball before sealing the hole. You need to have glue on hand, such as a second or super glue. Better to get a small tube and smear it on the damaged area. However, after the next puncture, it will not be possible to re-glue the ball in the same area. The store sells special patches. It should be noted that self-adhesive repair materials are less durable, so it is better to take ordinary ones and apply the fixing compound yourself. Before all procedures, it is better to treat the bonding site with acetone. Glue is applied to the ball and the patch, before that all unnecessary is removed from the latter, 2 cm are left around the perimeter around the puncture.

If the soccer ball is damaged, it can be sewn up. How to do it? It is necessary to find strong nylon threads. The process also uses an awl and a steel string loop (d = 0.5 mm). The last 20 cm long is rolled up by heating in the middle. The steel must be resilient and not bend by hand. The ends break off and a fragment of 10 cm in length remains. Damaged seams are torn apart. This must be done carefully and until they diverge. The loop is attached to a metal rod (awl), secured with an M5-M6 screw and bent. The seam begins as a lacing, that is, the thread is inserted from both sides with a metal awl with a loop, the threads are guided crosswise.

Video (click to play).

The only option is to fix the hole yourself, our advice will help you to do it quickly and efficiently.

Before you seal the hole in the ball, you should understand the various modern means for restoring cameras. If you have previously repaired car or bicycle tire tubes, some of the tools may sound familiar to you.

"Piece of Mind" Camera Repair Kit

The manufacturer has included everything you need in the kit:

Glue,
Patches of different sizes,
Metal surface cleaning tool,
Instructions,
Spools.

Customers are very positive about the use of this kit.

YP3204P-C Camera Repair Kit

The composition resembles the first sample:

Activating glue,
Five large patches,
Stripping tool,
Spools.

The set of patches differs. Large dimensions will help eliminate even significant camera defects.

Park Tool Bicycle First Aid Kit PTLGP-2

Accessories for the restoration of bicycle cameras will do an excellent job with our task. This set consists of six self-adhesive patches.

The easiest and most convenient tool to help beginners, you just need to apply a patch to the damaged area and wait for the specified time.

Gummy glue for repairing rubber products

If your favorite ball is made of rubber, rubber-based glue will work for you. Gummy is an excellent option, which has a low cost and a lot of positive reviews from buyers. It is not difficult to use it: apply a thin layer of glue to the hole, let it dry for 5 to 10 minutes. Repeat the manipulation. When the second layer dries up, you can safely inflate the shell.

Need to glue the patch to a leather or rubber surface? Use the "Droplet" for this purpose. The manufacturer recommends degreasing the surface before use. The composition must be applied to both surfaces; for better adhesion, place the structure under a press.

Almost any breakdown can be fixed on your own, with some knowledge.

How to fix a soccer ball

Chamber soccer balls are often easy to fix, but a lot depends on the damage. Let's consider the elimination of the most common defects.

How to fix a soccer ball camera

Camera replacement and repair

Having a camera complicates the task.

Nevertheless, the problem is solvable, follow the instructions:

Start by steaming the seam until the threads are slightly parted.
Cut the threads along the seam and remove the camera.
Replace the camera with a new one or restore the old camera (item 4.).
Use a special kit to bring the camera back to life. Sand the surface to be repaired and apply the activating adhesive, stick the patch and wait for the specified time. Self-adhesive patches will make your task easier. Place the restored camera back.
Sew the seams. Use nylon thread and an awl for best results.

Fixing the seams

You will need: awl and nylon thread.

We make a large knot at the end of the thread.
Using an awl, we pull the thread through the ready-made holes, you do not need to make new ones.
Use a figure-of-eight seam to pull the sides together.
Hide the rest of the thread inside the chamber. Your shell is ready.

VIDEO INSTRUCTION

The puncture should be repaired by analogy with the repair of a volleyball apparatus. You can use rubber glue if there are no cameras. Just apply it to the puncture and wait for the required time.

After examining the aids, it's time to start fixing the gap. Fixing a volleyball is a snap, even if this is your first time.

First, arm yourself with everything you need:

Soap solution for hole detection;
Acetone, or other surface degreasing agent;
A repair kit for tubeless products to choose from, depending on the severity of the hole. If you are dealing with a punctate cut, you can use tourniquets, for more serious "injuries" patches and glue are suitable;
Pump for subsequent pumping of the projectile.

Having acquired all the tools, feel free to start manipulating to bring the ball back to life.

The first step is to look for a hole. To do this, water the intended area with soapy water and begin to gradually release the air. The soap bubbles will give away the affected area.
Degrease the working area with acetone.
So, if the hole is small, the easiest way is to put a tourniquet. It is better to use a ready-made set. Using a special awl, enlarge the hole, then install the harness and wait for the time indicated in the instructions. When the tourniquet is grabbed, feel free to cut off the protruding end and you can start playing.
In case of significant damage, you will have to deal with a patch, if it is not self-adhesive, prepare a reliable glue. Apply a patch and place under a press. After waiting for the time according to the instructions, pump up the ball and make sure it is intact.

VIDEO DESCRIPTION

After playing outdoors, remove dirt with a damp cloth or tissue. A solution of liquid soap and warm water will help remove stubborn dirt. Avoid using aggressive cleaning agents;

Dry the ball in a well-ventilated area away from heating appliances. If it's too wet, wipe off excess moisture with an old towel;

Maintain the storage temperature between + 6 and + 23 degrees. Protect your ball from direct sunlight, frost and moisture;

Glued rubber copies, be sure to store them inflated.

Each player becomes attached to their accessories, not wanting to change them. By following simple instructions, you can extend the life of your ball and get it repaired when needed.Pakistan, far from being the most footballing country in the world, produces half of the soccer balls on earth: they are hand-sewn in factories in the city of Sialkot. And although this time the Chinese put the official balls for the championship games, FIFA gave the Pakistanis a consolation prize - the right to fill up souvenir shops with their products.
Photo: Massimo Berruti / Agence VU
Text: Elena Barysheva
Why the production of soccer balls in Pakistan has reached such heights, explains the legend. A century ago, they say, British soldiers based in this country decided to play tennis, and someone broke a racket. A local craftsman volunteered to fix his work, whose work was so liked by the damned colonialists that they advised the population to start producing sports equipment. The advice is said to be worth its weight in gold: leather processing in Pakistan was highly developed, and the demand for soccer balls in the vast British Empire was inexhaustible. In a word, by 1970, Sialkot had become the world center for the production of balls, even European manufacturers moved production there because of the cheap labor. At the same time, the release of official balls for championships under the auspices of FIFA began here.Problems came from where they did not expect: by the end of the 1990s, human rights activists led by UNICEF and the International Labor Organization intervened in the established business, they say, child labor is mercilessly exploited in the factories here. Fearing for its reputation, FIFA already in 2006 put forward the slogan "Score a goal with a clear conscience!" and ditched hand-sewn balls in favor of machine-made ones. In 2010, China won the tender for supplies, and the FIFA Approved label is now placed only on balls produced “under appropriate working conditions”.In order not to destroy the industry created in Pakistan, factories were still allowed to make official "souvenir" balls for the 2010 World Cup. Not so prestigious, but profitable: sales in a year can jump from $ 40 million to $ 60 million. However, the balls from Sialkot will shine on the football field at the 2010/11 UEFA Champions League matches: Pakistani manufacturers have already signed a corresponding agreement.During active games, the ball often breaks. In order not to constantly buy new sports equipment, it is better to fix it yourself. There are several methods for gluing the ball at home.Sometimes, the ball does not hold air, but the damage is not visually visible. In this case, you need to pump it up and dip it in water. Air bubbles will come out of the puncture site.Repair can only start when the surface is completely dry. Image - DIY soccer ball repair

With some knowledge, the repair of football equipment will not be difficult. First of all, you need to understand that the repair of a ball and other rubber products (for example, car or bicycle tires) is practically the same. Materials that will come in handy during the repair:

rubber glue;
superglue or instant glue;
a piece of rubber or a finished patch;
a sharp knife or scissors;
acetone.

The ball should be washed thoroughly with a mild detergent before repairing, then air dry. The place of damage is degreased with acetone or alcohol.

The repair of sports equipment differs depending on the type of ball and the nature of the damage. A tubeless ball is easier to fix, but there are ways to restore your camera.

It is better to glue the ball in a deflated state. Due to the constant air flow, the adhesive does not adhere well.

The smaller the damage, the easier it is to repair it. Algorithm of actions:

Find a hole in the surface.
Seal the hole with rubber glue.
Wait a while, according to the instructions.

You can also use superglue. It is convenient to apply it with a knitting needle. Thus, the glue will fall not only on the surface, but also into the hole itself.

For surface gluing of the ball, it is best to use a special patch. You can find ready-made options in stores - glue is immediately applied to them. These patches are convenient and easy to use, and can also be taken on the road. Repair algorithm:

Degrease the damaged area.
Cut off the excess from the patch so that it goes slightly beyond the boundaries of the hole.
Release the adhesive surface of the patch.
Stick it on the ball.

You can also use patches without an adhesive layer. They are a layer of rubber and are used in combination with super glue, second or rubber glue.

Some craftsmen use a sealant to repair the chamber from the inside of the ball. For this, a syringe without a needle is used. A sealant is drawn into it, and then squeezed out to the place of damage to the camera. This method is only suitable for small injuries and does not require cutting the ball.

In the event that the chamber is damaged, the ball will have to be cut in the place where the inflation hole is located. Instructions:

Find the damaged area.
Cut the rubber patch to a size slightly larger than the damage.
Apply super glue to the patch.
Press firmly and wait 1-2 minutes.
Deflate the ball and put the camera back in place.
Glue the chamber and the casing for the connection.
Sew up the incision site with nylon threads.

If the camera is rope (covered with a layer of rope), it is almost impossible to fix it.

After an active pastime, the ball should be washed without the use of aggressive agents. The chemicals will erode the surface, making the inventory less durable.

Balls should be dried only in natural conditions, far from heat sources.

Store inventory under normal conditions, avoiding extreme temperatures such as heat or frost.

After the game, it is better to lower the ball a little, and before use, pump it to the required pressure. But in no case, do not pump it.

Pressure recommendations are usually indicated next to the nipple.

Anyone can handle fixing a soccer ball. The main thing is to follow all the recommendations and use high-quality materials for repairs. In order for the equipment to serve for a long time and does not need to be repaired, it must be properly looked after and the recommended pressure level must not be exceeded.Sewing up the ball after repairing the camera.Friends, I have long wanted to publish this video, because I know that many are faced with this difficulty. Here, catch it.To the question of how you can sew a ball at home, and even with an inner seam, you can get the answer from this.Live Football. How to quickly fix / fix a soccer ball. An easy way to recover the ball after.Films of the First Channel around the clock, 7 days a week. See also the live broadcast of the First Channel in Inter.Live Football. Life hacks with a soccer ball. How to repair a nipple (valve). How to glue official plates.Chemical metallization of a soccer ball in bright purple chrome. Chemical chromium plating can do it all! Training.To repair a soccer ball, I needed the following tools and consumables: - two pairs of flat.In this video you will see what you need to sew the ball with your own hands. Subscribe to the channel:Footballs are made, according to the method of production, are divided into hand-sewn, made on an assembly line.WE RECOMMEND TO SEE IT. Thanks for watching my videos! Thanks for watching my video! Like and subscribe.Master Victor from Ukraine with many years of experience in sewing and repairing balls demonstrates the manual process.Educational and educational video. Especially useful for those who are faced with defective cameras in football.

Greetings to all members of the forum and "dropped in" visitors to this resource!

In the last few months, there hasn't been much time, and the Internet has been “not very good,” to put it mildly. Now I have a free minute and finally the problem with the Internet has been solved. Looking ahead, I want to say right away - if someone needs to repair the ball, write, I will help. Materials are selected individually.

A standard (adult) soccer ball is size 5 (size 5). This ball size is recommended for ages 12 and older. The circumference of the ball with the Fifa Quality Pro / Fifa Approved logos is 68.5—69.5 cm. The weight of the ball must correspond to 425—445 g. Ball pressure 0.8-1.1 bar

The ball is made from natural leather or synthetics. Mostly these are polyurethane (PU) and polyvinyl chloride (PVC). 85% of all balls are made in Pakistan, so don't be alarmed if you see the country of origin when you buy.

PU coating is much better than PVC coating. The ball, which has a high-quality polyurethane coating, does not harden in the cold and does not lose its shape. The ball is very pleasant to the touch. The thicker the PU layer, the higher its quality! With a good TPU (thermopolyurethane) layer, the ball is better controllable, and it also has better aerodynamics and better circumference. Balls made of PVC are much cheaper and wear out much faster. A ball made from such a coating can lose its shape, and in cold weather it “dubs”.

There is a textile lining under the polyurethane, which is glued crosswise to keep the ball in shape longer. Cheap balls have only a couple of layers, while more expensive models have 3 or more layers.

The ball is sewn by hand or by machine stitching. A hand seam is much safer! Such seams are of higher quality, and balls sewn in this way are more expensive! When the thread breaks, the hand-sewn ball will not “corrode”, since each panel of the ball is fixed with a knot. Make sure your seams stay intact. The hand-sewn ball has a thick thread.

Hand-sewn ball

Machine seam is not very strong. The stitches are small and the seams are always visible. Balls sewn this way will be cheaper than a ball that is hand-sewn.

Machine sewn ball

It is worth watching separately By pressure ball! The pressure of a standard (adult) size 5 ball should be between 0.6 - 1.1 (usually 0.8 - 1.0) bar. There is a special pressure gauge to determine the pressure. Some pressure gauges have a pointer on the scale of the recommended pressure values for balls used in different sports.

Since this is a PRO ball, its recommended pressure is 0.9 - 1.1 bar

Before pumping the ball, you need to drop one or two drops of special oil on the nipple (or on a special needle), but if it is not there, then you can spit on the nipple. If the nipple is lubricated at least periodically, then your chamber will last 40-50% longer and the pressure in the ball will be consistently high.Since the nipple, in contrast to butyl and latex chambers, is made of rubber, it is less elastic and susceptible to environmental influences: earth, grass, pebbles, moisture, etc. It is these factors that lead, in most cases, to the fact that the ball chamber fails.

Oil for nipple Select VALVE OIL

Special needle for inflating the ball

The required pressure is usually indicated on the pentagon where the chamber is glued. It can be different, because depends on the “class” (pro, practice, etc.) of the ball.

After each game, you need to lower (lower the ball) the ball pressure so your ball will last longer! Panels and seams lose their elasticity and stretch, and the ball wears out faster if it is constantly under high pressure. It is for this reason that the ball must be lowered.

The camera is made from butyl or natural latex. The butyl chamber is not as elastic (stiff), but it retains pressure better. Cameras of this kind are sometimes glued together from four parts, while latex chambers can be used!

The latex chamber is more elastic, has a high rebound, and after hitting the ball, it instantly takes the outgoing shape of the ball. Many professional balls are equipped with a latex chamber with a double butyl nipple, which is an ideal solution, since latex makes the ball soft and, accordingly, better sensitivity, and the double butyl nipple reliably retains air for a long time. It is worth knowing that the latex chamber tends to bleed air, this is quite normal. This is due to the fact that the latex structure is porous, and therefore a ball with a chamber of this type will lose pressure before a ball with a butyl chamber.

Balls are divided into several categories, namely: Professional (Pro) - this is a match ball marked Fifa Quality Pro (Fifa Approved - the old marking valid until April 1, 2015), it is usually the most expensive, because complies with all modern FIFA standards, which means that the ball with the mark Fifa Quality Pro (Fifa Approved) passed the following tests:

- Sphericity test - Circumference test - Weight test - Pressure loss test - Rebound test - Moisture absorption test - Shape retention test after 2000 impacts on a concrete slab.

The old ball markings look like this

The new marking valid from January 1, 2016 is as follows

FIFA Quality PRO is Fifa Approved

FIFA Quality is Fifa Inspected

IMS - International Match Standard (remained untouched)

What do these logos mean?

FIFA Quality PRO / Fifa Approved - approved by FIFA (International Football Federation)

FIFA Quality / Fifa Inspected - FIFA Inspected

To receive the FIFA Inspected mark, a soccer ball must pass 6 standard tests. The ball is tested for weight, circumference, roundness, rebound, water absorption, pressure loss, sphericity. Balls marked FIFA Quality / FIFA Inspected correspond to the IMS analogue, i.e. the ball meets FIFA standards, but the ball cannot be played in official matches.

IMS - International Standard for Soccer Balls

All balls bearing the IMS logo comply with FIFA requirements. The only difference between FIFA Quality / Fifa Inspected and IMS is that these balls cannot be played in official matches under the auspices of FIFA. FIFA Quality / FIFA Inspected soccer ball companies have to pay a small fee to FIFA, while there is nothing to pay for the IMS logo! That's the whole difference.

Football (and more) ball care tips

Wipe the ball with a slightly damp cloth after each game. Remember, the ball must dry naturally! If the ball is very wet, wipe it dry with a soft cloth. Dry the ball in a well-ventilated place away from heat sources. Never dry the ball with a hairdryer, etc. and also do not place the ball on the surface of heating appliances. Prolonged exposure to dirt, moisture, high temperatures leads to a deterioration in the physical properties of the ball, and, as a consequence, its playing characteristics, and a reduction in its service life. Remember about the pressure of the ball, after the game, lower it a little, before playing, pump it up to the required pressure, which is often indicated on the pentagon with a nipple. Don't pump the ball!

By following these simple instructions, you can extend the life of your ball.

Friends, I have long wanted to publish this video, because I know that many are faced with this difficulty. Here, catch it.

A simple and easy way to glue the ball tube without embroidering the tire. In this way it can be glued.

Sewing up the ball after repairing the camera.

Live Football. How to quickly fix / fix a soccer ball. An easy way to recover the ball after.

How to fix the ball if it goes down through the nipple. It's simple, we push the rubber glue with a needle for.

Live Football. Life hacks with a soccer ball. How to repair a nipple (valve). How to glue official plates.

Probably each of us faced a problem when he lowers the ball through the nipple, today I will share my own.

repairing the ball after punching on the ocation spike, like it. subscribe to the channel.

Master Victor from Ukraine with many years of experience in sewing and repairing balls demonstrates the manual process.

To the question of how you can sew a ball at home, and even with an inner seam, you can get the answer from this.

Master Victor from Ukraine with many years of experience in sewing and repairing balls demonstrates the manual process.

Do not forget to subscribe to the channel, like it, invite your friends. This will help the development of the channel. previous.

How to make a baseball.

To repair a soccer ball, I needed the following tools and consumables: - two pairs of flat.

The game, to which all the courtyard boys and some girls are not indifferent, adults also do not forget about it. Once upon a time, during this sporting competition, the entire population was removed from the streets, because the players were an uncontrollable mass and swept away everything in their path. A sport that fosters team spirit, where the ball must be passed across the field and kicked into the opponent's goal, of course, is football!

And without which it will not take place? If there are coaches, teams, a stadium and fans, if there is no ball, the game is ruined. It is in professional clubs and sections that the balls are carried out with nets, and if the soccer ball is the only and unique, bought with hard-earned savings, it’s a pity when it bursts at the seam. But there is no need to kick him, unhappy, out of sight in frustration. The ball is still to be repaired: it is possible to sew it up even at home.

The ball after sewing is as a whole. You can take it back to the game.

You will need: nylon threads; awl; metallized thread; tweezers and a needle.

1. Use strong and thick threads, nylon will do. You will need an awl and eyelet. Make it yourself, for this take an elastic steel string with a diameter of 0.4 to 0.5 mm. Two centimeters of metal thread will be enough to make the loop. Heat the middle of the string over a candle flame and then bend it in half.

2. Now make a buttonhole handle so that you can pull the thread comfortably. Take a metal rod with a diameter of 8-10 mm and clamp the ends of the string in its middle. To do this, you need an M5 - M6 screw. Pre-drill a hole for the thread. Now widen the loop at the end a little to let the thread pass. Shape the eyelet into a small crochet hook.

3. And directly about the seam itself. Soccer balls are made up of pentagonal patterns with pre-made holes for the threads. One side of the pentagon is one seam. To sew it up, take about fifty centimeters of thread. Hem the ball with an inner seam - the threads should be inside.

4. Sew the torn seams first and make sure they don't come apart further. The knot is usually located near the corner of the pentagon. If it is loose, tie it up. Repeat two to three times.

5. Now pass the eyelet through this hole. It must go through both holes of the pentagons to be sewn.

6. Insert the end of the thread into the loop and pull it through the holes. The ends of the thread should be equal. Then tie a double knot. Tie a knot so that it is inside the ball.

7.Then insert the eyelet on the right into the next two holes in the seam and pull one end of the thread from left to right. Pull one end of the thread and insert a loop into the same two holes in the seam on the left, then pull the other end of the thread from right to left.

8. Then repeat this process. When you reach the corner of the pentagon, pull the thread tightly by pulling on both ends and tie the knot four times. If the thread remains for the next seam, continue working. If not, cut it off and start sewing again. Do not tighten the last seam tightly, but push the knot with a wooden match inside the ball.

Sewing lobes in case of partial or significant damage to the stitching and replacing the camera in nipple balls. The tire is turned inside out, the broken seams connecting the lobules are ripped above and below at a distance of 1 cm from the beginning and end of the damaged area, the nipple ball chamber is stripped off and removed if it needs to be replaced. Details are cleaned from the ends of the threads. Two pieces of the ball or tires are folded with the front sides inward, clamped in the saddle jaws of the non-glue. The parts to be joined are pierced and stitched with a welded wire in 7-8 additions by hand, using a tight tightening, which gives a strong seam that does not bloom in case of accidental breaks (seam "into a curl" - Fig. 14).

Rice. 14. Manual seam "in a curling", used in the repair of tires of balls.

In the same way, sew all other slices and the washer of the nipple chamber to the corresponding slice of the ball. The seam of the last pair of nipple balls to be joined is not fully sewn up for inversion. The edges of the parts to be sewn together with the lining are overcast with rare stitches.

Attaching patches and replacing the balls of the ball. With minor gaps, patches are applied, with significant gaps and wear, the slices are replaced. The patch is thinned on three sides and applied to the segments of balls and tires so that the fourth side of the patch coincides with the seam of the segment. The patch is sewn by hand with a tight seam.

A new slice is cut out of the black-backed part of the skin. It must fully correspond to the part being replaced in terms of shape, type of leather, thickness and weight. The cut out slice is coated over the entire surface with rubber glue, duplicated with a cotton tent for football, basketball and volleyball balls and a rubberized cloth (for water polo balls) and dried naturally. The prepared slice is sewn into a ball or tire manually, using a tight tightening.

Video (click to play).

The repaired tires are turned onto the front side through the existing hole on the tire for the camera or the not sewn hole between the lobules in the balls, which, after turning inside out, is sewn up from the front side with a hand seam using a tight tightening.

Rate the article:

Grade 3.2 who voted: 84