DIY blitz 48 incubator repair

In detail: do-it-yourself repair of the blitz 48 incubator from a real master for the site my.housecope.com.

In the same way, like many other types of technology, incubators, over time, under the influence of various factors, lose their original properties and fail. In order for this device, indispensable in the poultry industry, to be able to reliably serve for a long period, it is necessary to inspect it from time to time and carry out correct repairs.

People who are seriously involved in poultry are well aware of the tremendous help that modern incubators bring them. Depending on the goals and needs, three main categories of these egg devices are produced:

Household incubators are characterized by small dimensions. The total number of chicken eggs that they can hold does not exceed three hundred. Farm-type devices are designed for up to five thousand eggs. And large industrial incubators are designed to "incubate" five thousand eggs or more.

Small-sized household incubators are currently the most popular among those who try their hand at poultry farming. Domestic models such as Cinderella, Nestka, Kvochka, Laying and TGB, as well as R-com devices from South Korean manufacturers are in great demand. Competent maintenance and timely repair are important factors that will ensure a long service life of these devices.

Incubators are quite complex technological devices, which include a large number of different parts and components. Unfortunately, sooner or later they cease to effectively cope with their functions and fail. Most often, the following components of an egg incubator are exposed to all kinds of breakdowns:

Video (click to play).

thermal regulator;
relay;
mechanism for turning eggs;
a heater block equipped with fans.

It is important to always keep in mind that the breakdown of even one single part can lead to incorrect operation of the device. And under such conditions, the death of embryos, alas, is inevitable. To prevent this, timely competent repair is necessary.

In the event that a breakdown occurs during the warranty period, the best and most effective solution is to take the household incubator to a professional service center. Alternatively, replace the faulty device model with a new one.

At the end of the warranty period, you can carry out repairs yourself, but this method is applicable only to those who have the appropriate skills. Since in their design the models of incubators Laying, TGB, Cinderella, Kvochka and Nasedka are in many respects similar to each other, the process of carrying out repair work is identical. The main thing in this case is to correctly determine the breakdown. To do this, you can see a preliminary photo and video that will help you complete the repair efficiently and efficiently. In addition, it is important to read the instructions first.

It should also be borne in mind that some types of work, in particular, high-precision adjustment of the incubator's thermal regulator, cannot be done by hand. This requires the help of professionals.

One of the most important components of a household incubator is a thermostat, which ensures the correct temperature level in this device. The most common problems associated with this component include:

breakdown of a special temperature sensor;
breakage of electrical wires;
violations of the regulatory function.

If the incubator is equipped with only one thermometer, any of these malfunctions can lead to the death of avian embryos.Repairing and restoring wires, as well as replacing the temperature sensor are tasks that you can handle with your own hands. But only professionals are able to correctly correct problems with regulation.

If the mechanism responsible for the timely turning of the eggs in the incubator is damaged, a special sensor must be replaced. In this case, the most important thing is a timely and prompt response.

Another important component of the incubator is a relay that maintains the required temperature level by turning off the heater when the desired temperature is reached and re-enabling it when it drops. There are two types of relays - electromechanical and solid state. The main problem of the first is the strong wear of the contacts, and the second is the overheating of the triac key. Therefore, in the first case, it is necessary to timely clean and replace the contacts, and in the second, to cool the key.

High-quality and reliable operation of the incubator is the key to successful poultry farming. Therefore, it is necessary to provide it with careful and accurate operation, with constant thorough cleaning and timely repair.

The incubator is designed for the incubation of poultry breeding eggs in a subsidiary farm. Produced in accordance with TU 4743-001-20704064-2008.

Power supply ………………….…. 50Hz 220V
Backup power supply ……………………………………… .12V
Maximum power (in brackets for BLITZ 72) ... ... 50 W (60 W)
Operating temperature range ……………. .... ... 35 - 40 оС
Accuracy of maintaining the set temperature ... ... 0.1 o
Necessary environmental conditions ………………
from + 17оС to + 30оС; 40% to 80% RH
Capacity of standard chicken eggs (in brackets for BLITZ 72)… .. 48 (72) pcs.
Air exchange ……………………………. forced
Number of trays ………………………………………….… 1 pc.
Turning type ………………. ……………. …auto
Maintaining humidity ……………………………… ..… ..
water evaporation with forced blowing
Adjustable humidity range …… .. 40% to 80% RH
Accuracy of maintaining the set humidity ... .. 3% RH
Overall dimensions (in brackets for BLITZ 72) …………………. ……………. 540x350x310 (715x350x310)
Weight (mass) (in brackets for BLITZ 72)… .. ……… 8.0 kg (9.6 kg).

Housing (electronic part, digital thermometer, fan and heaters, turning mechanism, cover, installed in the regular places). …. ……………………………………………………. ……. one
Egg tray …………………………………………. …………… 1
Water trays …………………………………… .. …………… 2
Operation manual ……………………………………… 1
Packaging box ………………………………. ……………… .1

4.1. Start working with the incubator carefully and thoroughly study this manual.
4.2. Do not use homemade fuses and fuses with rated currents other than those specified in this manual.
4.3. Before carrying out routine inspection, cleaning, maintenance or repair completely de-energize the incubator.
4.4. Do not use the incubator if the insulation of the power cord is damaged.
4.5. It is forbidden to place any objects on the incubator or closer than 0.3 m from it. Do not cover!
4.6. It is forbidden to repair the mechanisms yourself.
4.7. Attention! When bringing the incubator from cold air into a warm room, it must be kept for at least 4 hours and only then connected to the electrical network.

Please don't experiment! For the first time, do EVERYTHING as it is written in the instructions:

8.1. BEFORE CARRYING OUT ANY MAINTENANCE, THE INCUBATOR MUST BE DISCONNECTED FROM THE POWER SUPPLY.
8.2 Before incubation, gently wipe the incubation chamber, lid, tray, mesh, trays, fan with a weak (pink) solution of potassium permanganate.
8.3 After incubation - wipe the elements listed in the previous paragraph with warm soapy water and dry in direct sunlight.
8.4 You can store the incubator in any room where it is protected from atmospheric precipitation, aggressive vapors and mechanical damage.

9.1 When the incubator is connected to the 220V network, the incubator does not work:
• Check if the incubator is running on battery power, if it does, the power supply unit or power cord is faulty.
9.2 Incubator does not heat:
• The heater is turned off (turn it on with the button on the control panel).
9.3 The incubator does not heat evenly:
• Fan defective (replace).
9.4 Automatic rotation does not work:
• The egg tray is not installed on the gear motor shaft (remove the tray, turn on manual rotation, and turn the handle, set the shaft to the middle position. Place the tray on the shaft).
• The swing motor or its connection circuit is out of order.
9.5 Battery backup does not work:
• Check if the battery plus and minus are connected correctly.
• Check the battery.
• Very thin wires that connect the battery to the incubator (replace the wires so that the cross-section of the conductor is at least 1.5 sq. Mm).
9.6 The display shows the wrong temperature.
• The digital temperature sensor is out of order (replace).

10.1 The manufacturer guarantees the correct operation of the incubator within 24 months from the date of its sale, provided that the consumer observes the operating rules.
10.2 Carrying out repairs before the expiration of the warranty period (at the expense of the seller):
1) Consult the nearest household electrical appliance repair shop or a qualified technician. After carrying out the repair, inform the manufacturer of the confirmed amount of paid services and parts for the repair in order to reimburse these costs.
2) Ask the manufacturer for the parts necessary for the repair, if it is not possible to purchase them on the spot. Get technical advice.
3) Send a fully equipped incubator to the manufacturer's address for repair. Include in the parcel LETTER with a description of the malfunction and a warranty card for the incubator. For mailing, the incubator must be securely packed.
10.3 Carrying out repairs after the expiration of the warranty period is made in the same manner, but at the expense of the buyer.

WARRANTY REPAIR is made free of charge at:
460006, g... Orenburg, st. Guseva, 32, Repair workshop IP Kakurin V.V.

I bought a new Blitz norm q8, one set the norm, the second time I set the humidity a lot, I just can’t get it low, and the temperature is 37, 8, but all the time it jumps to 8, then 9 plays what to do how to do so that the temperature does not download?

the temperature always jumps in tenths. It's not scary. Well this is from our experience.

Even in the video, swollen capacitors are visible through the vent holes, replace the capacitors and there will be a spare power supply

Thanks for the helpful video. I have a problem with blitz72, when 220v is turned off, it switches to a 12v backup battery, after 220 power appears, it does not switch back to it. It clicks and the mains lamp blinks, from the tenth time it can switch. Tell me, if you know, maybe there is a relay that needs to be replaced, otherwise I'm on you with an electrician.

With electronics, I'm also on you, I do everything at random. Unfortunately, I don’t know how to help you in this matter.

Does that block work at idle?

overlooked, most likely kz somewhere

hello blitz, my turning mechanism turns in one direction well and in the other half thanks for earlier

Hello, but what to do if, while wiping the incubator, I accidentally damaged the lower spring, it remained intact, only changed its shape, stretched and bent. Is it critical? Can the incubator continue to be used?

No, it's not critical, you can use it, just pay attention to whether there is any touching each other between the turns .. and so it's okay. ))

the power supply fails due to a small power reserve and poor cooling

Hello. But please tell me the turn when you press the button is triggered every other time.It could be related to the power supply

Glory hello! I'm not a specialist in electronics, but I think that this is due to the button itself, the power supply does not affect the operation of the button in any way. By the way, it also happens to me every other time, although the power supply is serviceable.

and what kind of motor is there on the turn?

I forgot the name, but the motor from the VAZ-2110, which is on the damper of the interior heater. sold in auto parts.

And what kind of dryer did you buy for the battery?

Village life of the Zuev family, Thank you. I'll have to go to the store to look if we have them.

I don’t know what it’s called, it just hangs on a 60 cm long battery, accidentally stumbled upon in a store ..

(Sasha :) Thanks for the tip on the power supply. Of course, if you have too much from your computer, it's one thing. But, after finishing the test with the hive body, I will do more. And here is the option with an inexpensive, but seems to be a fairly normal unit. And, the main thing is not a shortage, to replace, if that!

Published by admin in Manor 10.01.2018 0 167 Views

The Blitz 48 incubator is an automatic household appliance with a built-in thermometer and humidity regulator. It is also designed for incubation of both chicken and duck, goose and quail eggs.

Automatic incubator "Blitz 48" is a high-precision modern device that has everything you need for a successful carefree incubation of eggs. Firstly, it is equipped with an ultra-precise electronic temperature controller, secondly, a digital thermometer, and thirdly, a fan for air exchange. The battery is also provided in case of emergency power off.

The set for the device includes two trays for pouring water and maintaining the desired humidity level. In this case, water is supplied to containers without the need to open the device chamber itself. This prevents unwanted temperature spikes. Mechanical dampers allow you to control the humidity in the chamber from 40% to 85%.

The body of the Blitz-48 incubator itself is made of plywood, the walls are additionally insulated with 40 mm foam, the top is transparent for observation. The inside of the chamber itself is covered with a galvanized sheet, which helps maintain a good microflora inside, and prevents temperature drops. The eggs are placed in one tray, which, using the program, is rotated to the sides every two hours.

An internal digital thermometer monitors the temperature to the nearest 0.1 degree. Even when the voltage is turned off, the incubator automatically continues to work without interruption, connecting to the battery. At the same time, the program does not require any additional settings, it remembers and maintains all the latest indicators. The battery is designed for 22 hours of continuous use.

maximum power - 50 W;
mains supply - 220 V, battery - 12 V;
capacity of chicken eggs - 48 pieces, duck - 38, goose - 20, turkey - 34 and quail - 130 pieces;
maintaining the temperature with an error of 0.1 degrees;
automatic, smooth egg turning;
built-in fan, thermometer with memory;
weight - 9 kilograms;
dimensions - 523x350x308 mm.

Egg trays are located approximately in the middle of the chamber, taking into account the distance of their rotation in both directions by 45 degrees. Water trays are set depending on the type of eggs. If there are two waterfowl, one is used for incubating hens and turkeys. If necessary, the heating element can be turned off, leaving only the fan itself. For example, this mode is used to cool the chamber.

Incubator Blitz-48 is an excellent modern household device with good characteristics and quality indicators. Today it is he who is the sales leader in the domestic market. It is the choice of most poultry owners for incubating small numbers of eggs. The incubator meets all the requirements of hobby farmers. So, the main advantages and benefits:

versatility - the ability to use for different types of eggs;
convenience and reliability;
automatic mode for smooth flipping of trays and temperature control;
possible humidity control without opening the chamber;
spacious;
easy to operate - no complicated electronics.

Compared to the pluses, this device has practically no minuses. In order to find them, you should be too picky - this opinion was formed after analyzing many reviews. So, we can single out two not only negative moments, but just not entirely convenient for some poultry farmers. This:

inconvenience to pour water into a very small hole in the ventilation compartment;
inconvenience to load eggs into trays already installed inside. It can be loaded from the outside, but then it is inconvenient to replace the trays.

You will be able to get acquainted with the device in more detail in the video, which provides a detailed overview of the device and describes its characteristics.

Cinderella for chickens - a universal incubator of Russian productionThe principle of operation of the Kvochka incubator and its featuresAutomatic incubator - a reliable and loyal assistant in poultry farmingShare information on social networks:Do you need a consultation?I bought such an incubator, laid 48 eggs, 33 hatched, 15 were unfertilized, I had Orpingtons. The entire hatching took a day, but the eggs were of different breeds of hens. I thought that the first time at least 10 things would come out and did not expect such a result, like this Blitz! By the way, I set the temperature to 37.8 degrees.I have the entire incubation process at 38 degrees, as stated in the instructions. I did not check the inside with a thermometer, but the output of 100% of fertilized eggs.It is very inconvenient to place quail eggs.Well, experience is needed. As in everything ...

Costs and incomes for laying hens

Diet of meat chickens

Diet of productive geese

Diet of breeding turkeys

Guinea fowl diet

Quail diet

Pheasant diet for meat

Income from the sale of eggs

Okrola rabbit

Farrowing sows

Sheep lamb

Calving a cow

Mare's foal

Goat lamb

The Blitz 48 incubator is an automatic household device with a built-in thermometer and humidity regulator. In addition, it is suitable for incubating not only chicken eggs, but also quail, duck and goose eggs. In this review, the device will be discussed in sufficient detail.The automatic fixture is highly accurate. It has all the necessary functions to ensure that the incubation of eggs is not a problem for poultry farmers.The Blitz 48 incubator has a temperature controller. This device is highly accurate. There is also a digital thermometer and a fan to help control air exchange. The developers have provided for the ability to operate the device in the event that the voltage is automatically turned off.An automatic incubator includes trays in which you need to pour water to maintain the required humidity level. The supply of water does not imply opening the chamber of the device. Due to this, it will be possible to prevent temperature jumps. Mechanical dampers can be used to control humidity in the range of 40% to 85%.The body of the device is made of plywood. However, it should be noted that the walls were insulated.For this, foam was used. The automatic incubator is equipped with a transparent top, through which it is possible to observe the hatching. The inner compartment is covered with galvanized sheet. Due to this, it was possible to achieve that the microflora was at the required level.Eggs are laid in a tray. By means of the program, it turns in different directions every few hours. A thermometer is required to keep track of temperature. Its accuracy is high enough. Even if the voltage is cut off, the Blitz 48 will continue to run through the battery. Additional adjustments are not required for this. The operating time of the incubator through the battery is up to 22 hours.Incubator "Blitz 48" has the following technical parameters:

device power reaches 50 W;

the device operates from a network (220 V.) and from a battery (12 V);

the incubator accommodates 48 chicken eggs, 38 duck eggs, 20 goose eggs, 34 turkey eggs, 130 quail eggs;

the temperature is kept in optimal condition;

eggs turn automatically;

incubator weight reaches 9 kg.

Blitz-48 is able to provide an opportunity for incubating a wide variety of eggs. But the features of the device do not end there. The device has a rectangular shape, so it can be placed almost anywhere. The external control unit is located on the side wall.The device is made of moisture-resistant and heat-insulating material. Heating elements with a fan are located on the inside of the device.Egg trays in the Blitz-48 incubator are located almost in the center of the chamber. At the same time, the designers took into account the distance for turns in different directions. The installation of the trays takes place depending on which eggs you want to incubate. Two containers will need to be installed if the eggs are from a waterfowl. One bath is enough for incubating chicken and turkey.The heating elements are allowed to be switched off, leaving only the fan running. Due to this, the chamber can be cooled.As the reviews show, the Blitz-48 is an excellent household device with excellent parameters, functionality and quality. At the present stage, this incubator is in a leading position in sales, as it meets all the requirements.The advantages of the device include:

Versatility. The device can be used to incubate different eggs.

The device is reliable and convenient.

There is an automatic mode that provides smooth turns of the trays. This function controls the temperature.

You can adjust the humidity level without opening the camera.

Blitz 48 is a capacious device.

The device is easy to operate, as there is no complex electronics.

There are not so many negative features compared to advantages. However, there are always picky buyers who will find flaws in the 48 model.At the present stage, there are several negative aspects that are inconvenient for some bird owners:

It is inconvenient to fill with water, since the opening of the ventilation compartment is small enough.

It is inconvenient to load eggs into trays that are already installed inside the device. You can carry out this operation from the outside, but in such a situation it will be inconvenient to install the trays themselves in the required place.

Your impressions of working with the Blitz 48 incubator will be described in the video. Be sure to watch it to understand what this equipment is.This is where the negative aspects of the Blitz 48 device end. We can safely say that the incubator is ideal for home use. The warranty period is two years. But, as the reviews show, after this period, the device continues to work properly.The developers included in the package of the Blitz 48 device not only a detailed manual for use. There is also a calendar for the incubation of different types of eggs. This will benefit those poultry owners who have just started breeding. This is what most reviews indicate.All documentation indicates the required temperature indicators, humidity parameters, cooling conditions and incubation time, taking into account the type of eggs.Preparatory work, according to numerous reviews, will not take too long. In addition, they can be easily dealt with using the detailed instructions. The main thing is to check for performance. Please note that the temperature sensors must function correctly, as well as the automatic tray rotation mechanism. It is also recommended to carry out a health check and the level at which the battery is charged.When checking for faults, it is recommended to fill the containers with the required amount of water. Keep in mind that it should be warm, not cold or too hot. After the above manipulations, it is necessary to adjust the temperature sensors by setting certain indicators. When all the simple manipulations are completed, you can start working with the device.A rather important step is the choice of eggs that you plan to incubate using the Blitz 48 device. They will need to be cleaned of dirt and feathers. It is not recommended to wash the eggs so as not to spoil them. The maximum number of eggs must not be exceeded. This parameter is specified in the manual in sufficient detail for each species of bird.If you exceed the number of eggs, this will negatively affect not only the rotary mechanisms, but also the safety of the product. They will not be able to roll over. This will negatively affect the survival rate, reducing it to almost the minimum level.In many cases, poultry farmers who have tried the Blitz 48 device and the like talk about their indispensability. They are completely autonomous, which saves time. In addition, the incubation process can become quite productive. The result will be a high hatchability process and a healthy generation.Novice farmers will find it difficult to do without automatic equipment. With it, you can achieve low costs and high productivity. More details about preparing the incubator and setting it up will be discussed in the video.Posted by admin in Manor 10.01.2018 Comments on the record Review of the Blitz 48 incubator, its features and photos are disabled 55 ViewsThe Blitz 48 incubator is an automatic household appliance with a built-in thermometer and humidity regulator. It is also designed for incubation of both chicken and duck, goose and quail eggs.Automatic incubator "Blitz 48" is a high-precision modern device that has everything you need for a successful carefree incubation of eggs. Firstly, it is equipped with an ultra-precise electronic temperature controller, secondly, a digital thermometer, and thirdly, a fan for air exchange. The battery is also provided in case of emergency power off.The set for the device includes two trays for pouring water and maintaining the desired humidity level. In this case, water is supplied to containers without the need to open the device chamber itself. This prevents unwanted temperature spikes. Mechanical dampers allow you to control the humidity in the chamber from 40% to 85%.The body of the Blitz-48 incubator itself is made of plywood, the walls are additionally insulated with 40 mm foam, the top is transparent for observation. The inside of the chamber itself is covered with a galvanized sheet, which helps maintain a good microflora inside, and prevents temperature drops. The eggs are placed in one tray, which, using the program, is rotated to the sides every two hours.An internal digital thermometer monitors the temperature to the nearest 0.1 degree. Even when the voltage is turned off, the incubator automatically continues to work without interruption, connecting to the battery. At the same time, the program does not require any additional settings, it remembers and maintains all the latest indicators. The battery is designed for 22 hours of continuous use.

maximum power - 50 W;

mains supply - 220 V, battery - 12 V;

capacity of chicken eggs - 48 pieces, duck - 38, goose - 20, turkey - 34 and quail - 130 pieces;

maintaining the temperature with an error of 0.1 degrees;

automatic, smooth egg turning;

built-in fan, thermometer with memory;

weight - 9 kilograms;

dimensions - 523x350x308 mm.

The main feature of the Blitz-48 incubator is the ability to incubate both chicken and other eggs (quail, turkey, waterfowl). However, this is not all. It is made of rectangular shape, convenient for placement, with an external control unit on the side wall. Externally, the material is moisture resistant and heat insulating. The heating element and fan are built in at the bottom of the device.Egg trays are located approximately in the middle of the chamber, taking into account the distance of their rotation in both directions by 45 degrees. Water trays are set depending on the type of eggs. If there are two waterfowl, one is used for incubating hens and turkeys. If necessary, the heating element can be turned off, leaving only the fan itself. For example, this mode is used to cool the chamber.Incubator Blitz-48 is an excellent modern household device with good characteristics and quality indicators. Today it is he who is the sales leader in the domestic market. It is the choice of most poultry owners for incubating small numbers of eggs. The incubator meets all the requirements of hobby farmers. So, the main advantages and benefits:

versatility - the ability to use for different types of eggs;

convenience and reliability;

automatic mode for smooth flipping of trays and temperature control;

possible humidity control without opening the chamber;

spacious;

easy to operate - no complicated electronics.

inconvenience to pour water into a very small hole in the ventilation compartment;

inconvenience to load eggs into trays already installed inside. It can be loaded from the outside, but then it is inconvenient to replace the trays.

These are, perhaps, all the shortcomings. Otherwise, we can safely say - ideal for home use. By the way, the warranty is two years, but even after this period has expired, many owners write that the incubator is working properly and shows a very high incubation result.You will be able to get acquainted with the device in more detail in the video, which provides a detailed overview of the device and describes its characteristics.

A fully equipped Blitz Norma incubator weighs 4 kilograms.

regulator temperature (digital)
12 volt source of power in case of power outages
fan (air exchange inside the incubator)
baths for humidifying the air in the chamber (2 pcs, topping up is done without opening the incubator lid)

The surface on which the incubator is supposed to be installed must be firm and level. The kit includes baths, they must be filled with water (recommended temperature is 42-45 degrees) and placed at the bottom near the wall.The humidity for each type of eggs is different, set the required level:The tray must be lowered to the end on the square shaft of the gear motor, the other side of the grill is in contact with the supporting round pin.Next, the lid of the incubator must be closed and the necessary humidity parameters must be set, the apparatus must be connected to an energy source. Activate automatic rotation and start heating the box with the ldquo; Heatingrdquo; function.The device will warm up to the required temperature for about two hours. It will not be superfluous to check all the data. Temperature # 8212; 37.8 (the numbers will flash as you turn the knob).The swivel mechanism should tilt approximately 45 degrees, a deviation of 5 degrees up or down is allowed.Checking the thermometer and fan should not be neglected.Without disconnecting from the battery, connect the incubator to the 220V network and check the operability of the automatic switch to another power source, if everything is in order, you can start working with the incubator.