DIY incubator repair cinderella

In detail: do-it-yourself Cinderella incubator repair from a real master for the site my.housecope.com.

In the same way, like many other types of technology, incubators, over time, under the influence of various factors, lose their original properties and fail. In order for this device, indispensable in the poultry industry, to be able to reliably serve for a long period, it is necessary to inspect it from time to time and carry out correct repairs.

People who are seriously involved in poultry are well aware of the tremendous help that modern incubators bring them. Depending on the goals and needs, three main categories of these egg devices are produced:

Household incubators are characterized by small dimensions. The total number of chicken eggs that they can hold does not exceed three hundred. Farm-type devices are designed for up to five thousand eggs. And large industrial incubators are designed to "incubate" five thousand eggs or more.

Small-sized household incubators are currently the most popular among those who try their hand at poultry farming. Domestic models such as Cinderella, Nestka, Kvochka, Laying and TGB, as well as R-com devices from South Korean manufacturers are in great demand. Competent maintenance and timely repair are important factors that will ensure a long service life of these devices.

Incubators are quite complex technological devices, which include a large number of different parts and components. Unfortunately, sooner or later they cease to effectively cope with their functions and fail. Most often, the following components of an egg incubator are exposed to all kinds of breakdowns:

Video (click to play).

thermal regulator;
relay;
mechanism for turning eggs;
a heater block equipped with fans.

It is important to always keep in mind that the breakdown of even one single part can lead to incorrect operation of the device. And under such conditions, the death of embryos, alas, is inevitable. To prevent this, timely competent repair is necessary.

In the event that a breakdown occurs during the warranty period, the best and most effective solution is to take the household incubator to a professional service center. Alternatively, replace the faulty device model with a new one.

At the end of the warranty period, you can carry out repairs yourself, but this method is applicable only to those who have the appropriate skills. Since in their design the models of incubators Laying, TGB, Cinderella, Kvochka and Nasedka are in many respects similar to each other, the process of carrying out repair work is identical. The main thing in this case is to correctly determine the breakdown. To do this, you can see a preliminary photo and video that will help you complete the repair efficiently and efficiently. In addition, it is important to read the instructions first.

It should also be borne in mind that some types of work, in particular, high-precision adjustment of the incubator's thermal regulator, cannot be done by hand. This requires the help of professionals.

One of the most important components of a household incubator is a thermostat, which ensures the correct temperature level in this device. The most common problems associated with this component include:

breakdown of a special temperature sensor;
breakage of electrical wires;
violations of the regulatory function.

If the incubator is equipped with only one thermometer, any of these malfunctions can lead to the death of avian embryos.Repairing and restoring wires, as well as replacing the temperature sensor are tasks that you can handle with your own hands. But only professionals are able to correctly correct problems with regulation.

If the mechanism responsible for the timely turning of the eggs in the incubator is damaged, a special sensor must be replaced. In this case, the most important thing is a timely and prompt response.

Another important component of the incubator is a relay that maintains the required temperature level by turning off the heater when the desired temperature is reached and re-enabling it when it drops. There are two types of relays - electromechanical and solid state. The main problem of the first is the strong wear of the contacts, and the second is the overheating of the triac key. Therefore, in the first case, it is necessary to timely clean and replace the contacts, and in the second, to cool the key.

High-quality and reliable operation of the incubator is the key to successful poultry farming. Therefore, it is necessary to provide it with careful and accurate operation, with constant thorough cleaning and timely repair.

Call within Russia is free

Has your incubator Cinderella failed the mechanism for maintaining temperature conditions? - no problem! Find out how to change the thermostat on the Cinderella incubator in 5 steps!

A distinctive feature of the Cinderella incubator is the heating system of the incubation chamber due to water cavities with installed heating elements. Temperature control and maintenance in the incubator is carried out by a thermostat equipped with a temperature sensor. It is his replacement that we will consider further.

To replace the thermostat in the Cinderella incubator, you do not need special tools - an ordinary screwdriver will be enough!

Using a screwdriver, unscrew the 2 self-tapping screws (self-tapping screws) that are located on the body of the heating device.

Carefully slide the plastic casing of the heater along the wires and remove the heat-insulating material.

Open the cover of the thermostat: use a Phillips screwdriver to unscrew the 2 self-tapping screws.

Carefully remove the sealing corners and thermocouples from the plastic housing of the heater.

The assembly of the heating device and the installation of the thermostat must be carried out in reverse order, ensuring good thermal contact between the thermoelements and the heater.

To raise healthy chicks, it is necessary to constantly maintain incubation conditions, therefore it is recommended to always have spare parts for the incubator on the farm.

Please note that this website is for informational purposes only and under no circumstances is a public offer determined by the provisions of Article 437 (2) of the Civil Code of the Russian Federation.

LLC "Novobyt-R", Legal address: 660064, Krasnoyarsk, st. Semaphore, 261D. Actual address: Krasnoyarsk, st. Semaphore, 261D. PSRN: 1112468012986. INN / KPP: 2463226961 / 246401001. Settlement account: 40702810931000095417, in KRASNOYARSKY DEPARTMENT N 8646 PJSC SBERBANK, Cor. account: 30101810800000000627, BIK: 040407627

Hello! Please tell me why the temperature sensor on the Cinderella incubator sometimes shows readings or not ?! Is this how it should be, or is it not normal? We just bought it, but the passport does not say about it! Could it be a marriage? (Elena)

Elena, hello. Answering your question, I will say right away that such a problem is far from being an isolated one. The fact is that almost every second user is faced with poor performance of the Cinderella incubator's thermostats. This can be said to be the weakest point of this device. For some, after several times of work, they fail completely, for others, they begin to junk.

Having analyzed the experience of many users of this incubator, I can say for sure that even with a working thermostat, you need to be on the alert. His indicators are too unstable. Judging by your question, you just stumbled upon this problem as well. Don't think this is normal. This is a clear defect in the operation of the device, which is very common.

Despite the fact that the technique is new, it is better to replace the thermostat at the "Cinderella" right away. I advise you to do this too to avoid further problems with the eggs. Temperature and its accurate reading is one of the most important aspects of incubation. If you do not get warm enough, the eggs will cool down and the embryo will die, and you will overheat as well. In any case, this is a defect, so replace the faulty part.

I also advise you not to forget that the body of this device is made of foam, and this material does not quite meet hygiene standards. It must be regularly treated with disinfectants. For more information on the operation and structure of this incubator, I suggest you find out on our website - https://my.housecope.com/wp-content/uploads/ext/3693/kyri/zolushka-inkubator-1972/.

Incubator problems or incorrect chick hatching?

Indo-ducks lay unfertilized eggs - why?

What to do if quails have twisted legs and they sit on a twine?

You can ask questions only after registration. Login or register, please.

Master class from Valentine (Bear)
We make wonderful ventilation in a household incubator such as Cinderella, Ideal brooding, kvochka, etc. incubator.
All you need: a burner, an assembly gun, silicone sealant, a plastic bottle (1.5 l.), The actual incubator, or rather its lid.
Here is a detailed video.

Using a burner, cut off the neck of the pet bottle

Using the same burner, we make a hole in the incubator lid, under our workpiece

We apply sealant inside the hole and on the workpiece itself, as well as inside the lid

That's all. let the sealant dry, clean the sealant residues and get opening / closing ventilation.

I still recommend watching the video

In the next episode, Valentine will show you how to prepare this incubator for laying and, again, a little trick on how to fix the grate.

Preparing the incubator for laying the eggs. Incubator setup. Posted by Valentine, aka Bear.

We lay the plastic floor

We fix the mechanism for shifting the lattice so that it does not fly off with a plastic harness

We close the incubator. We fill the coolers with water. And we are waiting for the result

It's great that there are such craftsmen who are ready to share their improvements. Thank you for the video. I look forward to continuing. By the way, I noticed in one photo, if I'm not mistaken, honey is mounted. electronic thermometer, in the same way (i.e. using a soldering iron)?

honey. electronic thermometer, in the same way (i.e. using a soldering iron)?

The second video shows this in detail.

I already understood, while I was writing, the second video appeared.
Thanks again.

Super Duper! Definitely a bookmarked topic!
Thank you Valentine!

I have a problem, the video is not loading. Can you tell me how many ventilation holes you need to make and the principle of operation, the plugs are not constantly unscrewed?
Please tell me.

Can you tell me how many ventilation holes you need to make and the principle of operation, the plugs are not constantly unscrewed?

Sorry for the long silence, For a long time I did not have the opportunity to go on the air. So:
There are two such holes for such an incubator. At the beginning of incubation, when the egg is intensively gaining the desired temperature, and there is no need for excess cooling, I keep the stoppers closed. Starting from the "middle day" I change the usual plugs to plugs with a small hole (about half the diameter of the neck). And, towards the end of incubation, three days before hatching, when the egg begins to consume more oxygen, I completely remove the plugs. Until the next bookmark, they will no longer be useful.

Whoever does not count chickens in the spring will have nothing to count in the fall.

By the way, in one photo I noticed, if I'm not mistaken, honey is mounted. electronic thermometer

As I understood that honey. an electronic thermometer is needed to measure the temperature, but what about the fact that different thermometers show different temperatures, they even showed a transmission about this. Water was poured in glasses, it was at room temperature, and 10 different thermometers were checked, including mercury and everyone showed different temperatures and the run was great

As I understood that honey. an electronic thermometer is needed to measure temperature, but what about the fact that different thermometers show different temperatures

Well, here you really have to trust some one thermometer. Or choose the one that is closer to mercury according to the indications. It seems that mercury is considered to be the most accurate.
On the other hand, the value 37.8 is not a tablet. Think about how stable, and close to the accepted as a basis, body temperature in a hen can be.

Whoever does not count chickens in the spring will have nothing to count in the fall.

WRITE TO US
Question:
Hello Valentin Nikolaevich!
I have a question for you as an experienced person (in the field of incubation), I just didn’t know who else to ask, please tell me how to properly drain the water from the incubator heaters Cinderella, Thank you very much in advance!
Sincerely, Alexander.
Answer
Hello, Alexander! Cinderella belongs to low-budget incubators. In it, they saved on everything, including the ability to competently and accurately carry out preventive work. Therefore, do not worry: Unplug the incubator from the mains, wait until the heating elements cool, carry the lid to the bathroom, or where you can drain the water, take out the plastic plugs that covered the water inlet openings, turn the incubator lid upside down, and stupidly shake out the water from there. Then leave to dry. For greater confidence, you can stuff gauze, bandages, etc. into the filler holes to thoroughly wet the containers from the inside. As you can see, everything is trite 🙂
Koment
Thank you so much for your answer! It turns out that everything is really that simple! clap

Whoever does not count chickens in the spring will have nothing to count in the fall.

Why is it so barbaric (turn the lid of the incubator upside down, and stupidly shake out the water from there.)
The incubator, although low-budget, is equipped with a pipe for draining water.

And you can also save on burner, sealant and bottle.
Just open the window.

Why is it so barbaric (turn the lid of the incubator upside down, and stupidly shake out the water from there.)

Then, that “Cinderella” (and similar models) is not an incubator, but an obscene curse. It would be barbaric to throw it in the trash immediately after purchase. I, as a civilized person, spent two seasons trying to make a Bird's Milk cake out of this shit.

Read also: DIY kia sportage 1 repair

In general, the reviews about Cinderella incubators are quite positive. There are some technical inconveniences, but, as a rule, hatchability of birds is high. Anton

We bought an incubator Cinderella with an automatic egg turning, and found out that if you remove this mechanism, then almost 100 eggs will fit there. I would like to note that the eggs are heated evenly, the heating element is of high quality, there are no failures, so if you lay high-quality eggs, then the bird is hatched without problems. We have been using it for 2 years now, and no breakdowns have been observed.

Cinderella suits me completely. I bought the device on the advice of my friends, I was delighted with the low price. During operation, it turned out in order to add water you need to remove the eggs... But then I got my bearings and began to use the douching bag, which is very convenient. No more complaints. Everything is working, the temperature is normal, the hatching of the chickens is 95%.

By following all the instructions and rules for hatching birds in an incubator, you are sure to get good results, even if you are a beginner. We wish you every success.

Watch a video review of this incubator.

Having searched for incubator schemes, I never found that the scheme would meet the following requirements:

the presence of a power reserve in case of power failure.

available element base;

low-voltage power supply to the load;

simplicity;

reliability.

The incubator circuit is assembled on two elements of the common K561LA7 microcircuit, at the output there is a powerful composite transistor K827 (A, B) installed on the radiator. Powerful KD2997 diodes are also installed on radiators.The incubator is powered by a transformer from an old black and white or better tube color TV (TC-180, TC-270). During a power outage, the circuit is automatically powered from the battery. When electricity appears, power will be supplied from TP1, and the battery will also be charged through L9, which is both a charge indicator and a charge current limiter. The battery may not always be kept connected to the circuit, but connected to the connector only during a power outage.The power supply of the microcircuit is stabilized by a D814B Zener diode or similar at 9V. The voltage drop is carried out across a 47o Ohm resistor (1-2W).The establishment of the circuit is reduced only to the selection of a thermistor (about 10 kOhm) and a variable resistor, in series with which a variable with a lower resistance can be installed for finer adjustment (not shown in the diagram).I chose car lamps as heating elements. I have two-contact (turn-stop 21/5 W), I soldered the contacts together to increase the power.You can use other lamps or heaters (powerful resistances, nichrome, etc.) depending on the type of incubator itself. I selected the power of the heaters in such a way that, without turning off the heaters, the temperature did not rise above 45g.Excessive power of the heaters will lead to heating of the output transistor, powerful diodes and the transformer, and insufficient power will take a long time to gain the desired temperature after scheduled cooling or overturning of eggs.I used the incubator body from an old refrigerator, pulling out everything I didn't need from it. I cut out a small window in the door and closed it with glass. The incubator itself is placed horizontally, the door opens downward. There is one large metal mesh shelf inside. The shelf is equipped with a side about 8 cm high and stands on legs about 15 cm high. Under the shelf there is a bath with water about 1/3 of the shelf area. Image - DIY cinderella incubator repair

The photo shows a variant of an incubator from an old refrigerator with 220V lamps.

The lamps at the top are arranged in two rows for even heating of the eggs. Distance from lamps to eggs 20 - 25cm. Lamps should be placed closer to the walls of the incubator, so the source of cold comes from there. It is necessary to check the uniformity of heating the eggs with several thermometers (along the edges and in the center), the temperature difference should not exceed 1 g.

I did not supply the incubator with a rotary device for two reasons:

To complicate the design and layout of the incubator;
When manually turning the eggs, we ventilate them in one, which is what the aunt chicken herself does

Turning eggs is enough 4 times a day.

To increase the humidity at the end of the incubation, you can put a dangling cloth halfway down the bath of water or put another bath of water. And just before the brood, I recommend even sprinkling the eggs with water.

You can read more about incubation modes here.

If you have any questions, write in the comments below.

Breeding chicks in a natural way in agriculture is gradually fading into the background. Incubators do an excellent job of laying hens, increasing productivity and reducing your labor costs several times. One of these helpers for farmers is the Cinderella incubator.

Content of step-by-step instructions:

"Cinderella" is a small incubator (up to 0.15 square meters in area), presented in the form of a square or rectangular box made of expanded polystyrene. This material undergoes certain processing during the production process, due to which it acquires a characteristic yellowish color and retains heat better.

The peculiarity lies in the heating mechanism - a liquid reservoir is built into the upper part of the unit. When switched on, the water heats up, distributing heat evenly over the inner metal plate of the appliance. Thus, all eggs receive a sufficient amount of heat for a long time.

The apparatus produced by the Novosibirsk company "OLSA-Service" is presented in 12 different modifications. They all share common characteristics:

the ability to work from different power sources - electricity with a capacity of 220 volts or from a battery with a capacity of 12 volts;

autonomous operation in the absence of electricity - in the lid of the device there are special containers made of polyethylene for hot water, which must be changed as it cools once every 3-4 hours. Alternatively, some also place bottles of heated liquid around the body to reduce heat loss in an emergency;

the "Cinderella" has an electronic thermometer that can constantly display the temperature inside, and an automatic heat regulator that corrects the temperature and maintains it in a constant state.

There are both positive and negative aspects in using the device, which can be found in more detail from the table.

Table. Advantages and disadvantages of an incubator.

Pokaż elementy sterujące odtwarzacza

Opublikowany 8 kwi 2017

Thermostat from China - repair of the Cinderella incubator.
You can order a thermostat here: ali.onl/sLz
Our second Cooking & Crafts Channel: plclip.com/channel/UCgYJ8cwCnW1T6S4lc5eXyNA
Service for purchases on AliExpress with a discount of 7 to 18%: epngo.bz/cashback_index/ga19bk
*******

incubatorthermoregulatorincubator

Read also: DIY water collector repair
and this regulator can be made to work from 12v

YouTube to help. These thermostats are popular with moonshiners.

+ To the village! I want to replace the factory one with an electronic one, but so that it functions like a native and from 220 and from 12

I won't tell you, but I think you can.

Why does the temperature drop by 0.5 degrees from the set

Heat loss. Add by 0.5.

Sdrasdvuyte. u menya est takoyje termorequlyator. koqda nastraival lampichki ne tak sdelalal i2 raza otklucilos. seycas etot termorequlyator ne otklucaet koqda naqrevatsa vi mojete ce nebud podskazat?

Hey! I don't remember now, but I watched a YouTube video about this thermostat. See if it can help you: plclip.com/user/results?search_query= thermostat mh1210w instruction

Who will tell you? Will it work on an incubator with 12V in case of a power outage if it is at 220V?

Maybe so - you know better there on the spot. Anyway, you can think of something - incubators usually draw a little electricity, if we are not talking about large, professional ones.

To the village! I have two! But in our country house they turn off now from 10:00 to 15-18: 00
Expensive skips will come out on the generator. Alternatively, a 12 volt thermostat can be connected from a battery. Maybe by spring they will not turn off

Most likely it won't. But it's easier for me - I have a gas generator in the yard.

Dim, it seems to me that the group of contacts that opens the circuit should open the phase (at 220v), because usually neutral sticks (“zero” in colloquial). What is the power supply voltage of the incubator, 12 or 220? In any case, it is better to connect “zero” permanently, and the phase to a breaker.

Dima, I'm more about the failed thermostat. Why the relay failed, I was puzzled by the question. Although the current is constant, it seems to me that it makes sense, after all, the breaker is the phase. And so, if everything works, so that a hundred years without breakdowns!)

The circuit was taken from the manual for this thermostat, and this circuit works - three outputs without any problems.

will have to buy for the spring season. I used other cheaper ones, they are not of high quality (W1209 DC 12V)

well, that means great, you have to take it)

I took him to the attic in August and he was a worker. Now I will tell you only in the spring. 🙂

and now in working order?)

This one withstood 3 outputs normally.

As far as I understand, such a regulator can even be put in a chicken coop on an outlet that will power the heater, convector or oil.

need to try. And then we still do not have winter and 7 kilowatts per night burns up. (The temporary chicken coop is half-insulated). From the side of the street, a slab, and from the inside, we sew horizontally with a non-edged board. We clog the walls with sawdust with a cement mixture.

Yes. Even in a refrigerator or freezer - it works even in subzero temperatures.

Hello. yes, I need to order the same for my Cinderella

Hello! Of course, our incubation went well, without interruptions.

good thermostat! I tried the first one I bought it CHEAP broke down I bought the second one I worked for 3 months and broke down, and I have been using this for a year!

it is sad that lately you have been doing a lot of advertising (

I have been watching your channel from the beginning. and you, as well as everything, start with good to convey good information to people, but when the YouTube channel starts to pay you, then the money takes over. sorry if you are not offended the first and not the last just life. thank you anyway

What should I do? You can always find other interesting channels on YouTube that do not advertise. You see, if I plow in the field, then I do not shoot a video for YouTube and for you as well - I will have no time to do this, I need to feed myself and my family. And if I shoot a video, then I don’t plow in the field, I don’t pick mushrooms, I don’t build sheds. What do you think: there are many people willing to pay monthly for my work on YouTube? And this is real work, believe me.

Christ is risen! Something for a long time no video, how are you?

Truly Risen! Deeds - thank God! 🙂 The video will be released today.

Patience and calmness - today they will appear! 🙂

something new videos for a long time!)

Patience and calmness - today they will appear! 🙂

I congratulate you on Easter. Christ is Risen.

Dmitry, it might be interesting. You just have an adult target audience, write to the academician by mail.
plclip.com/video/Dw_fgn6p1JA/wideo.html?t=11m10s (11min 10sec).

thanks for the interesting video, I wish you good luck! :)

WHY BUKHAROVSKY CLOSED HIS CHANNEL?

So, better call Alexey Anatolyevich and ask him about it. TELEPHONE: 8- (343) 200-61-41, email address:

Greetings, a stabilizer is required for it, it is afraid of voltage drops.

there on the relay contacts burned. If you remove the cover from the relay and clean it with sandpaper, it will work. Everything is like a car.

leave the solid-state relays alone (unless the money has nowhere to go). a conventional magnetic starter is connected. cheap and cheerful plus maintainable.

Tell me please, does he come with a thermal sensor?

Yes. It remains only to connect it.

it seems to have hurt the electricians))

But cheaper without housing: ru.aliexpress.com/item/1pcs-50-100-digital-temperature-controllear-switch-thermostat-temperature-control-switch-plate-W1209/1925573768.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_10151_10068_10150_10136_10137_10138_10060_10062_10141_10056_10055_10054_10059_10099_10103_10102_10096_10148_120_10147_10052_10053_10050_10107_10142_10051_10143_10084_10117_10083_10119_10080_10082_10081_10110_10111_10112_10113_10114_10037_10032_10078_10079_10077_10073_10070_10123_10120_10127_10124_10125 -10102_10120, searchweb201603_6, afswitch_1_afChannel, ppcSwitch_4 & btsid = 51cb287c-b1dc-479e-a73f-2fca787e4b04 & algo_expid = e05c718c-f0254f-4ca5-9pid

I also recommend buying such a pyrometer at the farm: ru.aliexpress.com/item/Non-contact-Digital-Laser-infrared-thermometer-GS320-50-360C-58-680F-Themperature-Pyrometer-IR-Laser-Point/32768818831. html? ws_ab_test = searchweb0_0, searchweb201602_3_10152_10065_10151_10068_10150_10136_10137_10138_10060_10062_10141_10056_10055_10054_10059_10099_10103_10102_10096_10148_120_10147_10052_10053_10050_10107_10142_10051_10143_10084_10117_10083_10119_10080_10082_10081_10110_10111_10112_10113_10114_10037_10032_10078_10079_10077_10073_10070_10123_10120_10127_10124_10125-10102_10120, searchweb201603_6, afswitch_1_afChannel, ppcSwitch_4 & btsid = 51cb287c-b1dc-479e-a73f-2fca787e4b04 & algo_expid = e05c718c-f02f-4ca5-9254-a835182fb19f-2 & algo_pvid = e05c718c-f02f-4ca5-9254-a835182fb19f

the swastika was corrupted by Hitler. just as now the rainbow and the blue color will be robbed. For example.
I was in a Buddhist monastery in China, where a swastika was painted around the entire fence, around the entire perimeter.

There are photographs where, before the First World War, this swastika was on the sleeves of officers, and in everyday life, and children drew it in the same way.
So the signs only change the labels.

Hi Dmitry,
according to a Chinese passport, it can and does 10 a
there is also a regular relay with contacts
what ten on thin contacts
Solid State Relays Help
a lot of information on YouTube
try this request - w1209
why the incubator is Cinderella. this is 100 rubles of polystyrene for 200 dollars

Hi Dmitry,
there 3 sput here 3 sput and one hole in the wallet
This thermostat is of course beautiful in the case
but he is not in your pocket and not in a conspicuous place. Why is he handsome?
what functions does it perform - only turns on the heater and does not bring humidity
the task that he performs can be achieved by buying
w1209 which you can buy 3-4 pieces with this money
Even if you don’t care money, you will get a supply of thermostats and you can quickly replace the dead one
what happens to them often
but with Cinderella what's the difference well, $ 50, the scheme does not change

Read also: How much does it cost to repair an apartment with your own hands?
Good morning! What $ 200, what are you talking about? We bought these incubators in the region of 3 tyr, and they paid for themselves long ago. I will not hang a 10 A regulator on this regulator. Most likely, it will live in an incubator, perhaps, then it will move to a smokehouse.

Thank you for your review. I ordered the same for the quails.

Better to connect through the starter. The relay in the controller will run almost forever. The main problem burns out the contacts in the relay at the controller, hence the malfunction: they do not heat, or when the contacts are stuck, it heats up constantly. The price is very interesting.

And which starter is suitable?

Eduard Pavlov yes the past, but reliable and maintainable.

For me it is a dark and dense forest. :))

Dmitry, hysteresis is the value upon reaching which the relay will turn on again, if you set the threshold to 38 and the hysteresis is 0.2, the activation should be at 37.8, if in cooling mode, on the contrary, at 37.8 the relay will be turned off, and at 38 it will turn on, hysteresis is needed so that the relay bounces did not fall, at the expense of shifting the LS limits, there really are no thermoresistance settings, point 3. 4. Apparently they are all the same in Chinese and are embedded in the firmware, which means this is not an alarm and it will not affect the measurement in any way. I worked with Russian devices, the setting is,
1. thresholds for alarm or relay activation
2.hysteresis (pause between on and off)
3.sensor limits, bottom top
4.reference resistance of the sensor at 0 ° C (for example, the TSM-50-M sensor where 50 ohm is the resistance at 0 ° C
the essence of this sensor, it changes the resistance in OMAX from temperature, and the controller tests this resistance and converts it into numbers
maybe it will be useful to someone)

thermostat norms. the one that died can be restored. the executive relay sticks there

Maybe. He will have to be amputated on long winter evenings.

No Murzon, this subject is of little interest.

I would sort it out a little and replace the relay with a solid-state one, once and for all forget about the relation / sticking of contacts.

I took such a weak relay stuck at a load of 100 W. I had to change it to an external relay

Let's see. I ordered another, for another incubator.

To the village! first pulled and on the 14th day the relay was stuck.

Let's take into account. Thank you. 55W pulls normally. 🙂

Great thing! We must also buy it, thanks for the review.

Remove your own thermostat from the incubator! and plug in a new regulator! This is necessary in order that: the native will completely glitch and stop switching on in the relay, the contact will burn out over time! and so everything is correct!

On Ali there are cheaper and smaller ones! They are better suited for such an incubator. Of course, you could have made the connection easier! these regulators have a primitive circuitry. Dry contact is a conventional relay.

Hi, oh Dmitry, you haven't watched my videos with the rework. It cost me about 120r. Is the cost of a regulator from China.
And so what you have is prettier and competently told. Like always from me.

Thanks! Recently, I have not seen much - the time is less and less.

I have one in my brooder, two ceramic lamps are connected in parallel. Quails don't complain. took on Ali something around 800re

oops, sorry, a little different

Heaters in inca for 220. How do I know? I have the same one to one. The regular regulator pulled out almost immediately. I put the Chinese one. I go to the Inca once a week. There is an auto-coup.

What is the swastika on the incubator?)

2 bolts twisted-vapens came out.

Once it was very interesting to read Khinevich and Levashov, but as a fantasy. With the Jews, this is the God of Yahweh (Jehovah). Jesus is God, the son and everything else in one person for Christians. But these are all religions. And religions were created to control the consciousness of people. Much more interesting is an independent analysis of events, opposition to the influence of any ideology and independent resolution of one's own psychological problems. Acquiring one's own experience of “living a full life”, refusing to live “according to books”, searching for “the causes of suffering, joy, dissatisfaction.” and destructive psyche "hidden desires" in the process of self-realization. Enjoy simple things ... - a cup of tea, silence, conversation with each other, the beauty of the starry sky.

at 39 g there was nothing to do with the Aryans, the schizophrenic simply imagined. And the Slavic-Aryan race, do you understand such a term? I'm just talking about something else in general, imagine the situation of V.V. Putin announces tomorrow that from today we will celebrate the New Year in June (for example) the year is today in the courtyard 3025 (.) Our God is now * different * So it was in the summer (as the year was called) 7208 from the creation of the world in 1700 (the war with the people ended Dragon) and for 1.5 billion years of residence) on the planet Earth (formerly called Midgard) Aryans did not fight with the Slavs, different peoples fought, the concept of RASA was initially different, not the same as now
P.S I don't impose anything on anyone, I'm just talking about something else
P.S 2 We say that the new year is January 1 from the birth of Christ, but nothing that he was born on December 25 and on the 8th day he was circumcised and we celebrate the new year * circumcision of the Jewish god

That's all right. I just do not understand people who use the illogical term “Aryan-Slavic race”.

Video (click to play).

From A.D. 1939 while they snatched nge for the cabbage soup. World War II heard ?.

Rate the article:

Grade 3.2 who voted: 85