The genius of some people is simply impossible to deny. What is only Jobs, who set a new standard for the whole world in terms of mobile devices. For a whole decade, no manufacturer has been able to deviate from the established canons. But all reflections on greatness and genius disappear when the iPhone 5s does not turn on, what to do in such a situation is unclear and commercial geniuses are in no hurry to explain.
No device can work without failures. More precisely, not a single high-tech device can never fail over the entire period of operation:
In such conditions, sooner or later the phone will stop giving "signs of life", there will be problems with the sensor or some services. This is inevitable, you should prepare yourself for such a turn in advance. To understand and look for the culprits in this case is not the most reasonable decision, it is better to try to fix the situation yourself.
Next, we advise you to watch a video in which Roman Lobanov will tell you how to repair an iPhone 5s that does not turn on by yourself:
All these methods of checking the health of the phone will not take more than a minute. And what is even more interesting, they will not harm the device itself in any way. Just think, no one opens the case, the “inside” of the iPhone does not climb.If you cannot start the phone on your own, you can safely contact the service center.
Sometimes this is already enough for the phone to work again. If you don’t understand anything about electronics, have never seen microcircuits and don’t know which side to hold on to the soldering iron, it’s better to take the iPhone to a branded service center right after the fall.
Should the specialists be told about the cause of the malfunction? If the iPhone is under warranty, you can keep silent about this or confidently prove that the phone has never fallen anywhere. Warranty cases for mechanical damage do not apply , and so - maybe lucky. Conscience issues are a separate topic. Is the warranty expired? Then feel free to say, this will simplify the diagnosis of the device.
Every year the number of users with "apple" products is increasing, but many newbies do not know at all, if the iPhone 5s does not turn on, what to do and where to run.
In this video, phone repairman Oleg Romanov will tell you in what ways you can revive the iPhone 5s that does not turn on:
VIDEO
Iphone , today it is considered the most demanded and popular mobile gadget from the American trade brand "Apple", which also has impeccable quality.
Manufacturing defects and defects in such phones are practically absent and all breakdowns are formed only through the fault of the users.
Manufacturers are very responsible for the manufacture of this device, however, not every owner is anxious and careful about the operation of this complex device. Often, carelessness leads to damage and you have to fix these defects.
But these actions can be carried out independently by reading our recommendations.
In this article, we will try to explain how it is possible to repair this device with our own hands using one example. You can also independently disassemble the gadget, replace components (covers, screens, batteries, etc.), replace vibration components.
The company produces several modifications of the iPhone (iphone 2g, 3g, 3gs, 4, 4s, 5, 5C, 5S, 6, 6+, 6S, 6S +, SE, 7, 7+), which are of very high quality, but breakdowns still happen and it is possible to do them yourself.
Using our instructions, you will have an excellent opportunity to fix the problem.
Before disassembling your device, decide why you need it at all, because it belongs to a very complex technological device and during disassembly it is easy to harm important components if you do not have enough experience. If you nevertheless decided to carry out repair and restoration work, perform these actions only if you are absolutely confident in your abilities.
You should be aware that all activities you perform at risk of your iPhone, which may lead to further malfunctions.
So, let's look at step by step how you can replace the microphone in the "iphone 4". To do this, you will need the following parts and tools (synchronization cable, special screwdrivers, a spatula for disassembly).
That's all the step-by-step instructions that we would like to offer you. We hope that with the patience, the courage and the allocation of time for this, you will succeed perfectly. We are not telling you how to put your phone back together, just follow the instructions in reverse order.
If you could not carry out a replacement, you always have the opportunity to call a professional service department, for example, a service center for the repair of mobile devices "MakeApple" , which specializes specifically in the repair and restoration work and maintenance of iPhones.
The most common problem of breakage of iPhones, as well as other mobile phones, is gadgets flooded with various liquids when moisture gets inside. In such a situation, it is generally not worthwhile to carry out repairs on your own, or expect a miracle that everything will dry up on its own and the iphone will work on its own.
The easiest breakdown is from flooding with any liquid, this will close the controller (after drying, the device can work, but the battery is quickly discharged). You cannot do anything on your own, here you need to carry out diagnostics and professional complex work on cleaning and repair.
In a situation, if you are faced with a problem, when you doubt that you will fix the problem, it is best to contact the knowledgeable specialists of the service center. "MakeApple" (link above), where you can always turn for professional support and free advice.
If your iPhone 5 won't turn on, there are several reasons why this might be happening. We will look at the most common "symptoms" and the treatment process for iPhone.
Interestingly, the fifth model is not very different from all the others in terms of malfunctions, but some differences are still present, so the repair will also be different.
It is very easy to recognize this symptom - absolutely nothing happens when you press any buttons. The screen is still black. In this case, you can do the following:
If the device worked in low temperatures (for example, you used it in winter at -50 ° C), it just needs to be thoroughly warmed up. To do this, well, you need to use any heating devices, just put it on a table in a warm room, for example, in an apartment. You can also, if you wish, hold it for a long time in your palms, again, warm.
Put your smartphone on charge. If it won't charge, then the problem is with the battery, charger, or connector. The only thing that you can check for yourself is the battery - if it is not swollen and looks normal, everything is fine with it. If possible, use a different battery in your phone. And if, after replacing the battery, the iPhone refuses to charge, the problem is in the connector or charger. Try using a different charger as well. If all else fails, take your iPhone to a service center.
Rice. # 1. iPhone 5 and charging it
In some cases, pressing the Home and Power buttons at the same time helps. They need to be kept for about 20 seconds. The Apple logo will then appear on the screen. Then you can release the buttons and wait for the operating system to start.
If a black screen appeared after the iPhone was dropped, it is likely that the display will need to be replaced.But it makes no sense to do such a procedure on your own and it is better to contact the service center.
Advice: Refer to Apple Authorized Service Providers for repairs only! Of course, repairs from “street” craftsmen can be cheaper, but the manufacturer's warranty in case of contacting them disappears, and in the event of an even greater breakdown, no one will return the money. Therefore, it is better not to try to save money, after all, the iPhone is quite an expensive thing.
As for moisture and cold, if you dropped your iPhone into water, even for a short period of time, it is better to completely disassemble it and let it dry. Better to leave it disassembled overnight. Then he will most likely come back to life faster.
This symptom is also quite common. It happens that the Apple logo does not just burn, but the apple blinks. It looks like it is shown in the picture # 2.
Rice. # 2. Burning apple on the iPhone screen
In this case, you should do the following:
Download and install iTunes on your computer (here is the link to the official website). Take a USB cable and run this program.
On the smartphone, hold down the "Home" and "Power" buttons. Thus, it will shut down.
Connect the phone with a cable to the computer and hold down the "Home" button on the device. Keep holding it until the picture shown in picture # 3 appears on the screen.
Rice. No. 3. ITunes logo on iPhone screen
A new window will appear on the computer screen, in which it will be written that there is a problem with the iPhone and it can be restored. To do this, simply click on the "Restore" button.
Rice. No. 4. Recovery window on the computer screen
Then just wait while iTunes does its job - download the necessary software, use it and return the device to a working state. This process usually takes no more than 20 minutes.
This method also helps in cases where the iPhone is constantly rebooting or some other malfunction occurs in it.
It also happens that even after fully discharging and charging, it does not want to work normally. So then it would also be useful to use iTunes for recovery.
It also happens that the iPhone's screen works quite well, but when the user tries to press any buttons - "Home", "Power", volume buttons, and so on, nothing happens. One gets the feeling that the device is turning into a brick.
In this case, the following can help:
Press the "Home" and "Power" buttons simultaneously. Thus, you initiate a hard reset of the smartphone. It may well help bring him back to life.
Disassemble the phone, remove the battery from it. Then it will shut down forcibly.
A forced restart also helps in cases where an application freezes.
If all this does not help, you will have to, again, take the iPhone to a service center. There is no other way out of the situation.
In this case, nothing is on, nothing blinks, nothing appears, but the smartphone simply does not turn on. That is, now it really is a real useless brick.
Here's what the user can do in this case:
Perform a forced reboot. As a reminder, this is done by pressing "Home" and "Power".
Try using the iTunes repair tool mentioned in issue # 2.
Put the device on charge and wait at least a couple of hours. It happens that after a complete discharge, the device will flatly refuse to turn on. And then you need to give it a charge. But, again, inspect the battery yourself - if something is wrong with it, charging will not make sense. The battery or charger needs to be replaced.
Press the volume up button several times in a row, and then the volume down button. No matter how strange this method may seem, in practice it often helps to bring the phone back to life.Although it is not really clear how this happens in general.
Usually all this helps to solve the problem. If this is not the case, do not try to fix the iPhone 5 yourself. Most likely, you will simply harm it even more.
It is also worth considering that if the iPhone turns on, but all sorts of errors appear on it, they need to be solved. You should not immediately restore or reboot the device, it is better to try to solve the problem pointwise.
If you do not understand any methods for solving problems, write about it in the comments.
The video below shows how specialists can solve the problem with an iPhone that refuses to turn on.
VIDEO
What to do for users who are faced with a serious problem - iPhone 5S won't turn on? Why suddenly went out and stopped turning on the iPhone 5S? DIY instruction and repair In this case, will the support of the professional masters of the Telemama service center help or is it still necessary?
Instructions: In this complex problem, there are several different options for hidden breakdowns at once and, accordingly, we also suggest eliminating them in different ways:
If the communicator does not turn on, try to reboot it yourself first. To do this, press the power button at the same time as the home button, hold them for a few seconds, and then release them abruptly. If it does not work, then the problem lies in something else;
The battery of the device is out of order. In such a situation, it is necessary to replace the battery with a new original one;
If the iPhone 5S is dead and won't charge anymore, then the connector is supposedly faulty. Examine it carefully for any faults;
The power controller has broken down after a sudden voltage drop or mechanical damage, such as shock;
If the connector is in good condition, but the device does not react to charging at all, then, presumably, the board or harness is damaged, a short circuit occurred after the penetration of liquid, the gadget fell, etc. Computer diagnostics will help to detect all defects and malfunctions.
Outcome:
From the 2 options that we offered you, choose the one that suits you best.
IPhone 5S Battery Replacement
warranty + installation from 20 min.
Replacement Charging Connector for iPhone 5S with Mic and Headphone Jack Original
warranty + installation from 20 min.
IPhone 5S Power Controller Replacement Original
Taking into account the Russian mentality, I am sure that there will be a huge number of "amateurs" and "home professionals", or just self-taught techies who will definitely take up the iphone5 repair on their own. But such self-confidence does not always end with success. Moreover, with such clever devices as Apple products. But my friend took his device in St. Petersburg to a specialized iPhone 5c repair service, and of course I started repairing myself).
The first step is to find out if the phone is subject to warranty service. And in this case, it is better to use the services of a service center, in order to avoid serious damage from unprofessional actions that no longer fall under the factory warranty.If the iphone 5 is no longer covered by the warranty, as in my case, you need to determine what kind of breakdown - a software failure or hardware damage. Some faults can be fixed with the new firmware. If you have experience with flashing, in principle, you can do it yourself, but you need to check the serviceability of all cables, since interrupting the software update process can lead to irreversible damage, which has been shown more than once. But, nevertheless, it is better to entrust a professional than to sit and experiment if there is no solid knowledge in software.
Considering the high-quality assembly of the iphone 5, the most frequent are mechanical damages, resulting in breakage of the screen and case. The front glass is the most vulnerable point of the device, due to its fragility. It is quite difficult to change the glass in the iphone 5 on your own, since you need to change the sensor and display together with the glass. All three parts represent a single module that cannot be broken down into component parts.
Check out the glass replacement video:
VIDEO
The buttonless smartphone has one important Home button, which can irritate the iPhone 5 owner with a bad reaction or lack thereof when pressed. In this case, it is necessary to replace the button cable. If the on / off buttons, volume controls and other switches do not respond, the entire top loop must be replaced. Depending on your skill level, you can repair the iphone 5 yourself or take it to a service center.
The incorrect operation of the smartphone is considered to be poor audibility at both ends, extraneous noise, rattling, poor sound reproduction. Here you will need to replace the speaker, microphone or polyphonic ringer. This is done quickly enough, without risking the operation of the smartphone as a whole.
Replacing accessories is easy. The main thing is to buy original chargers or headphones, since unlicensed items quickly fail and can harm your smartphone.
Thus, something can be repaired at home, but with certain knowledge and skills. In addition, you need to have special tools that allow you to do the work accurately and efficiently:
A set of small screwdrivers of different calibers and cross sections
Vacuum suction cup
Spatula
But first of all, you need to disassemble the iphone 5, in accordance with the sequence, since there is a very specific algorithm for disassembling a smartphone. You need to be patient and do all the steps carefully so as not to damage your expensive phone.
Even despite the perfection of this device, it is still created by man and still remains vulnerable to damage of all kinds. Therefore, it is possible that one day you will have to repair the iphone 5. But in order to carry out a high-quality repair, you need to have serious technical knowledge and skills, be careful and careful with regard to fragile and sensitive things. We must not forget that unskilled intervention can cause irreparable harm to an expensive device and it is better not to risk it, but to entrust the repair to professionals in order to avoid large financial costs.
As soon as it appeared, any generation of iPhone immediately became quite popular. Ease of use, wide enough functionality, as well as excellent design favorably distinguished the model line of phones ...
Recently, a large American company Gazelle, which specializes in the sale of used tablets and mobile phones, conducted a poll among resource users how much they value their own ...
As you know, Apple is very strict about the fact of not disclosing its future products, until they appear at the Conference of Apple itself. But how not ...
The genius of some people is simply impossible to deny. What is only Jobs, who set a new standard for the whole world in terms of mobile devices. For a whole decade, no manufacturer has been able to deviate from the established canons.But all reflections on greatness and genius disappear when the iPhone 5s does not turn on, what to do in such a situation is unclear and commercial geniuses are in no hurry to explain.
No device can work without failures. More precisely, not a single high-tech device can never fail over the entire period of operation:
iPhone is smartphone assembled from dozens of different components.
Each part of the iPhone is, in itself, a small miracle and the result of scientific and technological progress.
All these components are interconnected thanks to rather fragile loops, which have the ability to fail at the most inopportune moment.
It is impossible to exclude the "human factor", not every user can boast of careful handling of fashionable gadgets.
In such conditions, sooner or later the phone will stop giving "signs of life", there will be problems with the sensor or some services. This is inevitable, you should prepare yourself for such a turn in advance. To understand and look for the culprits in this case is not the most reasonable decision, it is better to try to fix the situation yourself.
Official dealers always advise to carry products to service centers and do not try to fix the breakdown yourself :
This is beneficial for the manufacturer from a commercial point of view. For fixing any, even the most insignificant malfunction, you can issue a good bill.
It is convenient for diagnostics. It is much easier to try to restore a device when you know for sure that no one has delved into it or performed any manipulations before you.
This is sometimes simply unacceptable to the user. The device is necessary for the user in a couple of hours in working form, and the service center is advised to come in 3-4 days.
This can hit a decent budget. Even small, but regular breakdowns outside the warranty period will cost a pretty penny.
Next, we advise you to watch a video in which Roman Lobanov will tell you how to repair an iPhone 5s that does not turn on by yourself:
VIDEO If iPhone refuses to turn on:
Simultaneously hold down two buttons - "Home" and "Power". Sometimes this action already helps to achieve the desired effect.
Press the buttons and hold them in this state a little longer. Even after half a minute you shouldn't despair, the phone may still start showing signs of life.
Put the device on a charger, you may not have noticed how the battery fully sat down.
Leave it to charge for 15 minutes, even if the battery was almost full recently. If you only knew how lithium batteries suffer in the cold.
"Click" the sound switch a couple of times. From the point of view of theory, this should not affect the performance of the smartphone in any way. But in practice, such manipulation sometimes really helps to launch an already hopelessly "extinct" device.
Launch iTunes on your PC and connect the cable from your iPhone. On the phone, while connecting, hold down "Home". This is an option to quickly restore your smartphone, just click the "Restore" button on the screen.
All these methods of checking the health of the phone will not take more than a minute. And what is even more interesting, they will not harm the device itself in any way. Just think, no one opens the case, the “inside” of the iPhone does not climb. If you cannot start the phone on your own, you can safely contact the service center.
Mechanical damage is a separate topic:
Malfunctions resulting from a fall or other physical impact are always more difficult to fix.
Any problem is related to the destruction or serious damage to part of the iPhone.
Most likely, you will not be able to do without seeking help from specialists.
The problem may not be due to damage to the part itself, but to the loop that connects it to all other components.
If you have already "opened" your iPhone, this experience can be repeated again:
Examine the contents carefully.
Look for cracks, impact marks, or crushing marks.
Inspect all loops, correct them if necessary.
Check if moisture has got inside.
Sometimes this is already enough for the phone to work again. If you don’t understand anything about electronics, have never seen microcircuits and don’t know which side to hold on to the soldering iron, it’s better to take the iPhone to a branded service center right after the fall.
Should the specialists be told about the cause of the malfunction? If the iPhone is under warranty, you can keep silent about this or confidently prove that the phone has never fallen anywhere. Warranty cases for mechanical damage do not apply , and so - maybe lucky. Conscience issues are a separate topic. Is the warranty expired? Then feel free to say, this will simplify the diagnosis of the device.
If your favorite phone suddenly stops turning on, you must:
Do not panic, pull yourself together as quickly as possible.
Check the charging port is working, it could be deformed or clogged with dirt.
Make sure the phone charges normally when turned off. The reason may lie in a malfunctioning iPhone battery or problems with the charger itself.
Press two buttons - "Home" and "Power", hold them in this position for up to a minute.
Play with the sound switch, then hold down the two cherished buttons again.
Connect your phone to your computer, after launching iTunes on your stationary device. An automatic repair might start.
Put the iPhone on charge overnight and check its performance in the morning using all the methods described above.
Every year the number of users with "apple" products is increasing, but many newbies do not know at all, if the iPhone 5s does not turn on, what to do and where to run.
In this video, phone repairman Oleg Romanov will tell you in what ways you can revive the iPhone 5s that does not turn on:
VIDEO
Group: Honorary members of the forum Apple iPhone 7
Reputation:
589 Post has been edited KUKUndrik – 10.05.15, 17:46
Group: Honorary members of the forum Apple iPhone 7
Reputation:
589 If we talk about the reasons why the Home button does not work in iOS devices or works with some lag (sticking), there are 2 reasons:
Software crashes; Mechanical damage (contamination of the mechanism and the contact pad).
The first category of reasons is “treated” quite simply, in the overwhelming majority of cases the calibration of the Home button on the iPhone and iPad of the entire model range, be it iPhone 5, 5c, 5s or any other, helps.
Deal with mechanical problems much more difficult , but you can still reanimate the Home button with your own hands.
Post has been edited KUKUndrik – 10.05.15, 17:45
Group: Honorary members of the forum Apple iPhone 7
Reputation:
589 Suppose that the Home button on your iPhone is stuck, sometimes it is stuck, sometimes you need to press this control several times for the device to react. What methods can be used to restore the working state of the Home button?
Home button calibration; Correction of the position of the connector;
Cleaning the contact pad and lubricating the mechanism;
Substitution of a button at the program level.
Let's consider each of these methods in more detail.
Post has been edited KUKUndrik – 10.05.15, 17:45
Group: Honorary members of the forum Apple iPhone 7
Reputation:
589 In order for the main mechanical control in an iOS device to obediently respond to each press, follow these steps:
Run any native (stock) iOS application on the iPhone. It can be weather, calendar, promotions, or any other; Press and hold the Power button until the shutdown slider appears on the screen. Release Power;
Press and hold Home until the shutdown slider disappears.
Post has been edited KUKUndrik – 10.05.15, 17:46
Group: Honorary members of the forum Apple iPhone 7
Reputation:
589 IPhone 4 and 4S owners may experience an issue where the Home button becomes completely unresponsive to pressing. Don't rush to change the button. A non-standard trick with a 30-pin standard connector will help to fix the situation:
Connect a standard USB cable to the iPhone; Place your finger under the plug inserted into the connector;
Gently push the plug in the Bottom-Up direction and press the Home button. If the button starts to work, in no case press harder, this will not help, but it may lead to mechanical damage to the connector. The effort should be small and this is enough.
Post has been edited KUKUndrik – 10.05.15, 17:46
Group: Honorary members of the forum Apple iPhone 7
Reputation:
589 On the Internet, you can find a method of dealing with a broken Home button using lubricants and cleaning agents such as alcohol and WD-40 (it is also “vedashka”) In everyday life, “vedashka” grease doors, vehicle mechanisms, locks and much more. Oddly enough, but the tool can help in repairing the Home button, for this:
Apply some product to the Home button; Press the button several times in succession (it may take up to 15 clicks) until the agent penetrates into the gap between the button and the protective glass of the iPhone.
For
Apply a little rubbing alcohol to the surface of the button in the area of the gap around the entire perimeter; Press Home several times (up to 10 times);
Wait until the alcohol has evaporated, it usually takes no more than 2 minutes, and you can check.
In the vast majority of cases, the steps described above will help bring the faulty Home button back to life. but if your device or its separate button is mechanically damaged (traces of damage are visible, there is no button movement), it will not be possible to solve the problem by lubricating, cleaning and calibrating the button. But even in this case, there is a way out, there are 2 of them:
Repair or complete replacement of the button in the service center; Assign Home button functions to gestures.
Video (click to play).
Post has been edited KUKUndrik – 10.05.15, 17:46
