Do-it-yourself iphone 5 repair does not charge and does not turn on

In detail: do-it-yourself iphone 5 repair does not charge and does not turn on from a real wizard for the site my.housecope.com.

In the modern world, it is necessary to keep in touch all the time, keep it in touch with people, exchange messages and photos. To do this, each of us chooses a smartphone for quality and functionality. When we want to have both that and another perfectly, we turn for a smartphone to a company that has become the unsurpassed flagship of our time and buy an iPhone from it. How much joy such a purchase brings us. But what if after a while the iPhone stops responding to charging and does not turn on?

If your phone has stopped giving any signs of life and it does not have a response to the charger, then this problem could be caused either by a battery failure or a broken charger. Let's look at the "What to do if the iphone 5 won't turn on or charge?" Problem.

1 Hypothermia. This could happen if you were outside for a long time, especially in winter when the temperature drops far below zero degrees Celsius. It is worth remembering that the normal operating temperature for a smartphone is 5 to 10 degrees Celsius. Especially often, the iPhone 5 does not turn on and does not charge for this very reason.

2 Instability of electricity supply in the network. If a light bulb often flashes at home or the light turns off abruptly, then unfortunately this problem could be caused precisely by a power outage.

3 The phone has been dropped. It often happened that when the phone was dropped, the battery came off. It is worth remembering that in all iPhone models the battery is non-removable, so we will not be able to charge it using various "frog" devices. Therefore, most likely you will not notice any visible defects, at first the phone will even work. The only thing that can be a sign of a torn battery is a characteristic sound if you shake the phone. Also, if dropped, any other board or microcircuit that is responsible for supplying current, as well as charging in the iphone 4s, could be damaged.

Video (click to play).

4 Firmware error. It often happens that the iphone 4 won't turn on or charge for this reason.

Try charging your phone with a different charger. In the case of hypothermia, you just need to warm up the phone for a while with warm palms without special heating means, and after 15 minutes your phone will be ready for use again. Unfortunately, in all other cases, you will need to contact the service center for help.

If your phone charges but does not turn on, then most likely everything is in order with your charger and the problem lies in the smartphone itself. The answer to the question "Why does the iphone 5s not turn on or why the iphone 6 does not turn on?" we will try to uncover below and find solutions.

1 Try turning on your smartphone using iTunes. To do this, you will need to connect your iPhone to your computer and open the program. Then hold down the "Power on" and "Home" buttons on the smartphone. When the program finds a phone ready for recovery, try launching it.

2 Instability of power supply in the network. If a light bulb often flashes at home or the light turns off abruptly, then unfortunately this problem could be caused precisely by a power outage. Such failures can lead to burnout of contacts and some microcircuits.

3 Deep discharge of the battery. Your phone is completely discharged and turned off for a long time, then most likely the battery is in a state of sleep or deep discharge. To fix this problem, you need to put the phone on charge overnight and try to turn on the phone in the morning, most likely it will already be fully charged.

4 Failure of the charge microcircuit. This reason could be due to the fall of the phone. In this case, you need to contact the service center or store where you purchased your gadget.

5 Software failure. The software failure could be caused by a lack of RAM in the device or mechanical damage, in order to solve this problem you will need to contact the service center to determine the exact cause. This is why the iPhone 4s won't turn on.

6 Poor quality chargers. Of course, non-original chargers are much cheaper in price, and they are sold on every corner, but unfortunately, the use of such a device can break down and completely ruin your phone. Only branded devices can guarantee you high quality and stability. Try charging with a branded charger.

If the phone turns on but does not charge

The reason that the phone turns on but does not detect the charger could be due to many factors. Most likely your charger is out of order. Let's take a step-by-step look at how to spot the problem and try to fix it.

1 Broken charger wire. Examine the charger wire carefully, you may notice some unnatural bends or defects. In this case, you just need to replace the wire by purchasing the original one from the company store.

2 Damage to the power supply of the charger. If, after examining the wire, you did not notice any defects, then the problem may lie in the power supply, if there is no visible damage on it, then it could break if dropped, since it contains a board that is responsible for charging your phone.

3 Failure of the charging input. Often we do not immediately pay attention to a breakdown of this nature. It happens that charging does not work right away and we try to twist or "push in" the wire, thereby breaking the charging connector. Thus, it could come off or burn out.

4 Lack of current to charge the battery. Using low-quality chargers, we forget that they can only be partially calculated for our phone model. If you are using an original charger, then try to charge your phone in another place, for example, in a cafe or use a friend's charger.

We hope that with the help of this article you managed to fix your breakdown, or at least find the cause of the breakdown. If none of the methods suits you, we recommend that you contact the service center to establish a more accurate "diagnosis" of your phone.

Today the iPhone is super popular and in demand. Its excellent screen, which gives an incredibly high quality picture, has won over millions of users. Practical design, popular interface, convenient applications will not leave you indifferent to this crown of Apple's creation. But what to do if even such a perfect device has problems. For example, it just doesn't turn on. In this case, it is very important to correctly diagnose the cause. Only after that, act.

First of all, you need to diagnose problems

We will describe the most common causes of problems and tell you what to do.

When the iPhone looks at you with a blank, black screen - do not rush to panic. This does not mean that it is finished. Most likely, the reason is that the battery is completely discharged. The second reason may be a frozen iOS. It is easy to rehabilitate the device. The main thing is to do exactly what we tell you.

If the reason that the battery is discharged is the long stay of the iPhone in the cold, then first you should warm your device in your palms. Then connect the device to the charger for fifteen minutes. If the reason for the non-working iPhone is in a discharged battery, it will soon turn on. If this did not happen, it is possible that the frozen iOS is to blame. Then you need to press the HOME and POVER buttons simultaneously and hold them for ten to twenty seconds. You will soon see an apple on the screen.Release the buttons and iOS will launch after about a minute. Image - Do-it-yourself iphone 5 repair does not charge and does not turn on

If in this case the long-awaited apple does not burn, we will show you what to do. You need to turn silent mode on / off on iPhone two to three times in a row. Then plug in the charger for fifteen minutes. This operation, as a rule, always gives a positive result.

If these steps are unsuccessful, try changing the charger and cable. Perhaps they are the culprit behind the iPhone not turning on. If, moreover, you are using not the original, but a cheap Chinese counterfeit, this may be the reason.

There is also the following option: The iPhone does not respond to button presses, and the screen of the last application is frozen on the screen. The first thing to do in this situation is to force restart the device. To do this, simultaneously hold down the "Sleep" / "Wake up" and "Home" buttons, and after ten to fifteen seconds you will see that the apple is on the screen again.

It happens that the device still does not turn on. Then you should connect to the charger and leave the iPhone charging for fifty to sixty minutes. You will soon see that the charging screen is on. If this does not happen, check carefully the connector socket, charger and cable. Perhaps the reason is in them. Try the same procedure with a different source of battery charge.

Another unpleasant situation that is often encountered among users of iPhone 4S, iPhone 5S - an apple is on and off on the screen. In this case, do not test the strength of your nervous system. Most likely, there was a failure restoring iPhone from backup. What should be done in this situation? The recovery mode and the computer on which you first need to run iTunes will help you. Then connect the USB cable, but for now only to the computer. Your next action is to turn off the iPhone completely, getting rid of the apple, which is still on and off. To do this, you must hold down the "HOME" and "POVER" buttons. Next, hold down "HOME" and connect USB. This should be done until the iTunes logo appears on the screen and next to it - the image of the plug. You will see an inscription on the screen that the recovery mode is working. All that will need to be done in the future is to click the "Restore" button.

What if you tried everything, but the apple never appeared on the screen of your iPhone? There is a special recovery mode - DFU. It is designed to restore iOS firmware in the event that all your other attempts have failed. We must say right away that this mode should be used only as a last resort, because when it is activated, all data from the iPhone will be lost.

So, first you need to connect to the charge for five to ten minutes. Once connected to your computer, check if the device is found in iTunes. If this does not happen, switch to DFU mode: simultaneously hold down the HOME and POVER buttons for ten seconds, then release the POVER. Then, for fifteen to thirty seconds, hold the "HOME" button until iTunes writes "Recovery Mode". Do not expect further that the screen will thank you and show, as usual, an apple. The evidence of a successful entry into DFU is the absence of any image on the screen. If you want to restore the firmware to your iPhone, find the "Restore iPhone" button in iTunes. To exit this mode, simply disconnect the cable from the device and press “HOME” and “POVER” for ten seconds. After these manipulations, the iPhone should reboot.

If, despite all the efforts, the iPhone could not be reanimated on its own, you will have to seek help from specialists. But remember that only with the right handling, your favorite gadget will serve you faithfully for many years.

The genius of some people is simply impossible to deny. What is only Jobs, who set a new standard for the whole world in terms of mobile devices. For a whole decade, no manufacturer has been able to deviate from the established canons.But all reflections on greatness and genius disappear when the iPhone 5s does not turn on, what to do in such a situation is unclear and commercial geniuses are in no hurry to explain.

No device can work without failures. More precisely, not a single high-tech device can never fail over the entire period of operation:

iPhone is smartphoneassembled from dozens of different components.
Each part of the iPhone is, in itself, a small miracle and the result of scientific and technological progress.
All these components are interconnected thanks to rather fragile loops, which have the ability to fail at the most inopportune moment.
It is impossible to exclude the "human factor", not every user can boast of careful handling of fashionable gadgets.

In such conditions, sooner or later the phone will stop giving "signs of life", there will be problems with the sensor or some services. This is inevitable, you should prepare yourself for such a turn in advance. To understand and look for the culprits in this case is not the most reasonable decision, it is better to try to fix the situation yourself.

Official dealers always advise to carry products to service centers and do not try to fix the breakdown yourself:

This is beneficial for the manufacturer from a commercial point of view. For fixing any, even the most insignificant malfunction, you can issue a good bill.
It is convenient for diagnostics. It is much easier to try to restore a device when you know for sure that no one has delved into it or performed any manipulations before you.
This is sometimes simply unacceptable to the user. The device is necessary for the user in a couple of hours in working form, and the service center is advised to come in 3-4 days.
This can hit a decent budget. Even small, but regular breakdowns outside the warranty period will cost a pretty penny.

Next, we advise you to watch a video in which Roman Lobanov will tell you how to repair an iPhone 5s that does not turn on by yourself:

If iPhone refuses to turn on:

Simultaneously hold down two buttons - "Home" and "Power". Sometimes this action already helps to achieve the desired effect.

Press the buttons and hold them in this state a little longer. Even after half a minute you shouldn't despair, the phone may still start showing signs of life.

Put the device on a charger, you may not have noticed how the battery fully sat down.

Leave it to charge for 15 minutes, even if the battery was almost full recently. If you only knew how lithium batteries suffer in the cold.

"Click" the sound switch a couple of times. From the point of view of theory, this should not affect the performance of the smartphone in any way. But in practice, such manipulation sometimes really helps to launch an already hopelessly "extinct" device.

Launch iTunes on your PC and connect the cable from your iPhone. On the phone, while connecting, hold down "Home". This is an option to quickly restore your smartphone, just click the "Restore" button on the screen.

All these methods of checking the health of the phone will not take more than a minute. And what is even more interesting, they will not harm the device itself in any way. Just think, no one opens the case, the “inside” of the iPhone does not climb. If you cannot start the phone on your own, you can safely contact the service center. Image - Do-it-yourself iphone 5 repair does not charge and does not turn on

Mechanical damage is a separate topic:

Malfunctions resulting from a fall or other physical impact are always more difficult to fix.
Any problem is related to the destruction or serious damage to part of the iPhone.
Most likely, you will not be able to do without seeking help from specialists.
The problem may be related to damage not to the part itself, but to the loop that connects it to all other components.

If you have already "opened" your iPhone, this experience can be repeated again:

Examine the contents carefully.
Look for cracks, impact marks, or crushing marks.
Inspect all loops, correct them if necessary.
Check if moisture has got inside.

Sometimes this is already enough for the phone to work again. If you don’t understand anything about electronics, have never seen microcircuits and don’t know which side to hold on to the soldering iron, it’s better to take the iPhone to a branded service center right after the fall.

Should the specialists be told about the cause of the malfunction? If the iPhone is under warranty, you can keep silent about this or confidently prove that the phone has never fallen anywhere. Warranty cases for mechanical damage do not apply, and so - maybe lucky. Conscience issues are a separate topic. Is the warranty expired? Then feel free to say, this will simplify the diagnosis of the device.

If your favorite phone suddenly stops turning on, you must:

Do not panic, pull yourself together as quickly as possible.
Check the charging port is working, it could be deformed or clogged with dirt.
Make sure the phone charges normally when turned off. The reason may lie in a malfunctioning iPhone battery or problems with the charger itself.
Press two buttons - "Home" and "Power", hold them in this position for up to a minute.
Play with the sound switch, then hold down the two cherished buttons again.
Connect your phone to your computer, after launching iTunes on your stationary device. An automatic repair might start.
Put the iPhone on charge overnight and check its performance in the morning using all the methods described above.

Every year the number of users with "apple" products is increasing, but many newbies do not know at all, if the iPhone 5s does not turn on, what to do and where to run.

In this video, Oleg Romanov, a phone repairman, will tell you in what ways you can revive the iPhone 5s that does not turn on:

If your iPhone 5 won't turn on, there are several reasons why this might be happening. We will look at the most common "symptoms" and the treatment process for iPhone.It is interesting that the fifth model is not very different from all the others in terms of malfunctions, but some differences are still present, so the repair will also be different.It is very easy to recognize this symptom - absolutely nothing happens when you press any buttons. The screen is still black. In this case, you can do the following:

If the device worked in low temperatures (for example, you used it in winter at -50 ° C), it just needs to be thoroughly warmed up. To do this, well, you need to use any heating devices, just put it on a table in a warm room, for example, in an apartment. You can also, if you wish, hold it for a long time in your palms, again, warm.

Put your smartphone on charge. If it won't charge, then the problem is with the battery, charger, or connector. The only thing that you can check for yourself is the battery - if it is not swollen and looks normal, everything is fine with it. If possible, use a different battery in your phone. And if, after replacing the battery, the iPhone refuses to charge, the problem is in the connector or charger. Try using a different charger as well. If all else fails, take your iPhone to a service center.

Rice. # 1. iPhone 5 and charging it

In some cases, pressing the Home and Power buttons at the same time helps. They need to be kept for about 20 seconds. The Apple logo will then appear on the screen. Then you can release the buttons and wait for the operating system to start.

If a black screen appeared after the iPhone was dropped, it is likely that the display will need to be replaced. But it makes no sense to do such a procedure on your own and it is better to contact the service center.Advice: Refer to Apple Authorized Service Providers for repairs only! Of course, repairs from “street” craftsmen can be cheaper, but the manufacturer's warranty in case of contacting them disappears, and in the event of an even greater breakdown, no one will return the money. Therefore, it is better not to try to save money, after all, the iPhone is quite an expensive thing.As for moisture and cold, if you dropped your iPhone into water, even for a short period of time, then it is better to completely disassemble it and let it dry. Better to leave it disassembled overnight. Then he will most likely come back to life faster.This symptom is also quite common. It happens that the Apple logo does not just burn, but the apple blinks. It looks like it is shown in the picture # 2.Rice. # 2. Burning apple on the iPhone screenIn this case, you should do the following:

Download and install iTunes on your computer (here is the link to the official website). Take a USB cable and run this program.

On the smartphone, hold down the "Home" and "Power" buttons. Thus, it will shut down.

Connect the phone with a cable to the computer and hold down the "Home" button on the device. Keep holding it until the picture shown in picture # 3 appears on the screen.

Rice. No. 3. ITunes logo on iPhone screen

A new window will appear on the computer screen, in which it will be written that there is a problem with the iPhone and it can be restored. To do this, simply click on the "Restore" button.

Rice. No. 4. Recovery window on the computer screenThen just wait while iTunes does its job - download the necessary software, use it and return the device to a working state. This process usually takes no more than 20 minutes.This method also helps in cases where the iPhone is constantly rebooting or some other malfunction occurs in it.It also happens that even after fully discharging and charging, it does not want to work normally. So then it would also be useful to use iTunes for recovery.It also happens that the iPhone's screen works quite well, but when the user tries to press any buttons - "Home", "Power", volume buttons, and so on, nothing happens. One gets the feeling that the device is turning into a brick.In this case, the following can help:

Press the "Home" and "Power" buttons simultaneously. Thus, you initiate a hard reset of the smartphone. It may well help bring him back to life.

Disassemble the phone, remove the battery from it. Then it will shut down forcibly.

A forced restart also helps in cases where an application freezes.If all this does not help, you will have to, again, take the iPhone to a service center. There is no other way out of the situation.In this case, nothing is on, nothing blinks, nothing appears, but the smartphone simply does not turn on. That is, now it really is a real useless brick. Here's what the user can do in this case:

Perform a forced reboot. As a reminder, this is done by pressing "Home" and "Power".

Try using the iTunes repair tool mentioned in issue # 2.

Put the device on charge and wait at least a couple of hours. It happens that after a complete discharge, the device will flatly refuse to turn on. And then you need to give it a charge. But, again, inspect the battery yourself - if something is wrong with it, charging will not make sense. The battery or charger needs to be replaced.

Press the volume up button several times in a row, and then the volume down button. No matter how strange this method may seem, in practice it often helps to bring the phone back to life. Although it is not really clear how this happens in general.

Usually all this helps to solve the problem. If this is not the case, do not try to fix the iPhone 5 yourself. Most likely, you will simply cause even more harm to it.It is also worth considering that if the iPhone turns on, but all sorts of errors appear on it, you need to solve them. You should not immediately restore or reboot the device, it is better to try to solve the problem pointwise.If you do not understand any methods for solving problems, write about it in the comments.The video below shows how specialists can solve the problem with an iPhone that refuses to turn on.

STEP 3 This step is slightly different for different iPhone models. More precisely, the way of its implementation differs ... To make it clearer for you, below I have given short instructions for different models:

iPhone 4S / 6S: hold down the HOME and POWER buttons for 15 seconds
iPhone 7: hold down the POWER and - volume buttons for 15 seconds
iPhone 8 / X: quickly press and release the volume button +, then the same with -, then hold down the Side button (previously it was called POWER) for 15 seconds

If the combination above is successful, the iPhone screen should first go out and then display the glowing apple logo. Release the buttons and wait about one minute for iOS to fully launch.

STEP 4 Sometimes it is necessary to turn the mute switch on / off a couple of times before performing STEP 2. Nobody knows why, but it REALLY helps if holding down the HOME and POWER buttons does nothing.

If these actions are unsuccessful, it could mean one of the following:

Internal components of the iPhone are faulty
Charging cable defective
The power adapter is out of order

Find a 100% working charger and use it.

Do not be skeptical about the charging module and cable. Recently I have replaced my own "lace", tk.when using it, the iPhone was charged only up to 60%. With intensive (and not careful) use, the conductive cores of the cable can fray / break off, which will lead to the impossibility of passing the required current. About power adapters (in common people - charger) I can say one thing - USE ORIGINAL POWER SUPPLY ADAPTERS. Fakes bought in China heat up and melt right in the process. This applies to both home 220V and 12V car chargers.

Now, regarding Lightning cables - the original wire is initially flimsy, and it costs an expensive $ 19. I advise everyone to purchase a lightning cable from Ugreen (link to AliExpress), which is marked MFI (Made For iPhone) and accordingly uses the original lightning chip. For little money, you get a permanent cable!

How do I get up to 90% cashback for purchases on AliExpress - Instructions

Well, if you charged your iPhone with anything (for example, cheap Chinese car adapters), it is possible the case failure of the power controller or iPhone charging controller... If this is your case, then the battery will simply not be physically able to receive a charge. the microcontroller controlling the charging does not give the necessary commands for this. I wrote about this in an accessible language in a separate article - read it here. It is difficult for yourself to do something here and it is best to contact a normal service center.

It also happens that an application on the iPhone may freeze or stop working normally. In this case, it is necessary to forcibly close it and thus unload it from the phone's memory.

In order to forcibly close the application, we do this:

iPhone 4S - 8:

iPhone X: Swipe from the very bottom of the screen and hold your finger on the screen after the application tiles appear, touch and hold your finger on one of the tiles until red circles appear. Unload a frozen application from memory.

On a couple of occasions, my iPhone would completely stop responding to physical button presses. At the same time, the screen of the last application usually remained on the screen, and I could not exit it. If you find yourself in a similar situation, simply “hard” restart your iPhone. To do this, hold down the HOME and POWER buttons for 10 seconds (for iPhone 7, 8 and X see button combinations above).

It happens that the iPhone does not turn on, but at the same time Apple lights up and disappears on the screen ... and so on ad infinitum. This is usually the result of an unsuccessful iOS update, a clumsy jailbreak, or a crash when restoring an iPhone from a backup. In such a situation, it may seem that the phone has come to an end. But do not rush to conclusions, but rather try to do the following with the device.

In most cases, this problem can be solved by restore iPhone to factory settings... There are several ways to do this, depending on your situation. I have provided both iPhone recovery modes below.

STEP 1 Launch iTunes on your computer and connect the USB cable (you don't need to connect the USB cable to the phone yet)

STEP 2 Turn off the iPhone while holding the HOME + POWER buttons (for iPhone 7, 8 and X combinations are listed above)

STEP 3 Press and hold the HOME button and connect the USB cable to the device

STEP 4 Hold the button HOME until the iTunes logo and a picture of a plug are displayed on the screen of the device

STEP 5 A notification will appear on the computer screen that the device is in recovery mode

STEP 6 Now just click the Restore button ... Before restoring your iPhone to factory settings, your computer will need to download the latest version of iOS from Apple's servers. Wherein the phone will lie with the screen off and show no signs of life... Even with a good fast internet connection, the download process can take 40 minutes or more. If your internet connection is unstable or slow, the process may never complete. Connect to a faster Wi-Fi connection.

If your iPhone won't turn on, even after the one tried above, there is still another way to restore your iPhone in DFU (Device Firmware Update) mode.To start the iPhone in DFU mode, you must strictly follow the instructions provided in the link above.

If you need to put iPhone X or 8 into DFU mode - read this article

What? Still struggling with your iPhone or iPad and can't get it to work? My advice to you is to save your nerves and go to a normal service center. No money is charged for a preliminary examination.

Video (click to play).

Well, if today I helped bring your iPhone back to normal, it’s your turn to help - you don’t mind giving away just $ 1 for the development of this site, right? How to do this is written at the link below. You tell me - I tell you ... Well, or vice versa.

Rate the article:

Grade 3.2 who voted: 84