DIY isothermal van repair In detail: do-it-yourself repair of an isothermal van from a real master for the site my.housecope.com. Like I do not like Kaverz 12 Aug 2013 Hello, there is a Gazelle, 2007 onwards, 330202 (extended, like 4.25). The task: how to assemble the thermobox yourself (for transporting alcohol, water, etc. in winter) or purchase for a price up to 50,000 of the following dimensions - length and width for 330202, but height 220 is the minimum. can anyone sell? Like I do not like ooh 12 Aug 2013 Put the stove in the booth and make the thermo booth like I'm telling you)) Buy a thick polycarbonate (I think 20 will do) and over an awning to hide this miracle from the eyes of bastards Polycarbonate material is convenient for smooth or non-smooth bending, by cutting, if necessary, the places of the corresponding .. There is also a social variant, namely thin plywood and polystyrene between two layers of plywood, on top again with an awning. And a stove or just a copper tube, long along the edges of the body, at your discretion, for the diameter of the hose for the stove, plus a plumbing tap and you will be lucky I have a factory thermal box, it weighs all 800 kg, probably five polystyrene in a circle. In frosts I drove roses, 1000 km, not one died. For control, the water bottle was not frozen in more than 15 hour hike. On the floor, a felt mat spread, there are boards covered with one and a half millimeter tin. Of course, polystyrene is preferable and not dense, but grainy, for which is softer, there is more air and in any frosts, sit down with a booty, you will feel the warmth Like I do not like RUSlan174 12 Aug 2013 length and width for 330202, but height 220 is the minimum. can anyone sell? and how much weight are you going to load there? water in PET bottles in 3 rows in 3 meters and already 1.5 tons! Video (click to play). Like I do not like gavriloff 12 Aug 2013 Of course, polystyrene is preferable and not dense, but grainy, which is softer, there is more air and in any frosts Even a schoolboy knows. The denser the better. Sandwich panels are probably pressed from neuy. here is the height of 220 minimum. can anyone sell? for alcohol why so much? you need to heat a lot Like I do not like Dima734 12 Aug 2013 for alcohol why so much? you need to heat a lot most likely a person is looking at the future. now alcohol, then refrigerators I ran into this myself, went to the tent, they said let's have a booth, and even a thermo, and a load. plastic parts (bumpers, fenders, hoods). I bought a second car, half a year has passed, they say, let's say 4 meters long. Like I do not like Kaverz 12 Aug 2013 Dima734 noticed exactly - today alcohol and water, tomorrow IKEA furniture, and the day after tomorrow refrigerators. So just to do something almost from scratch for all occasions. there are no specific drawings or numbers for panels, materials - quantity and volume? although the topic with a stove proposed by OOH is very interesting and it is interesting to learn more about it (tube materials, how to bring, etc.) Kaverz read the adjacent topics - "Stretcher platform painting" and "Making a stretcher" forma-pokraska / nie-podramnika / there I and many others described the construction of a platform and a frame Post has been editedLehan: 12 August 2013 - 23:33 Like I do not like Dima734 13 Aug 2013 Dima734 noticed exactly - today alcohol and water, tomorrow IKEA furniture, and the day after tomorrow refrigerators. So just to do something almost from scratch for all occasions. there are no specific drawings or numbers for panels, materials - quantity and volume? although the topic with a stove proposed by OOH is very interesting and it is interesting to learn more about it (tube materials, how to bring, etc.) there are no drawings, I already bought it with the booth. Right now I am developing drawings for the awning, I want to lengthen and expand so that 6 Euros stand up Dima734 noticed exactly - today alcohol and water, tomorrow IKEA furniture, and the day after tomorrow refrigerators. So just to do something almost from scratch for all occasions.there are no specific drawings or numbers for panels, materials - quantity and volume? although the topic with a stove proposed by OOH is very interesting and it is interesting to learn more about it (tube materials, how to bring, etc.) frankly speaking, with such a question it is cheaper to buy a ready-made one. everything is standard, but if the question has already arisen how, and there is nothing to extricate from the standard, accordingly you will not do it yourself, but for the assembly somewhere it will take you more than buying a ready-made one, then why? and if you just have an awning platform, and you yourself will redo it, then it will also not be a budget option, the documents are not cheap. at the company buy and deliver, it will be cheaper, faster, and more reliable. count up one welding by yourself, there without interruption in two, so that it does not fall apart and according to technology, work for a week Like I do not like Kaverz 13 Aug 2013 Clearly, please advise where is the best place to see the booths? Of course, as close as possible to Krasnodar or with delivery Today, refrigeration equipment on the Gazelle is installed by many owners of these wonderful commercial vehicles. Often, this is due to the desire not only to improve the functionality of the body, but also to significantly increase your income from cargo transportation. If you have a flatbed car, then, first of all, you should attend to the thermal booth. You can buy ready-made (including used ones), or you can weld the frame yourself. You will need a profile pipe 50x50x2 mm (12 meters) and 50x25x2 mm (24 meters). Optimal dimensions for installation on board: 3.2 x 2.0 x 2.0 meters. The money for the material is about 4,000 rubles. Here's what we end up with: Read also: DIY bone repairNext, we collect the insulating "sandwich": sheathed outside with suitable sheet material (for example, polymer coated metal) inside we lay 5 cm of insulation (foam is suitable, since it is inexpensive, and is sold in the required thickness) the surface inside the booth is also sheathed with something that is not subject to corrosion (galvanized or sheet plastic is suitable) Galvanizing will cost you about 200-250 rubles per square meter, plastic - 300 rubles. per square meter, foam - 180 rubles per square meter Corrugated aluminum can be used on the floor, although this is not the most budget option (about 1800 rubles per square meter of sheet 2 mm thick). You will have to tinker with the gate in order to weld them smoothly and efficiently (without distortion of the hinges). Operation of a refrigerated Gazelle with "curved" body doors is one torment. Since the dimensions of the structure are quite impressive, it is not easy to bring them to zero in garage conditions. Pay special attention to this, sometimes it takes a whole day to weld and fit the gate. If you decide to install refrigeration equipment in a Gazelle van, then as thermal insulation, you can consider spraying polyurethane foam directly on the inner surface of the van: A 3 cm thick layer will completely replace 5 cm of polystyrene, PPU is the highest quality insulation. In the future, cover it with sheets according to the scheme suggested above. In conclusion of the first point, take a look at a ready-made thermal box for a gazelle, which you can make yourself: What you will have to deal with: compressor electronic control unit (refrigeration automation) condenser unit (outdoors) evaporator unit (in a thermal box) pipes and hoses with refrigerant (freon) wiring The compressor ensures the pumping of freon throughout the entire refrigeration circuit. It is installed in the engine compartment and is driven by a belt of ancillary units. Brackets and a new (longer) strap may be included with the refrigeration kit you purchased. If not, you will have to make metal staples with your own hands and pick up a longer drive belt in an auto parts store. It is worth noting that the refrigerator compressor can also operate on a voltage of 220 V. For this, a special cord is usually provided.The mode of operation "from the socket" is used in those moments when the car is at loading / unloading, the Gazelle engine at these moments can be turned off. The electronic control unit is installed in the driver's cab. It serves for setting and displaying the temperature in the refrigerator box, and also monitors the state of the entire system. When necessary, it turns on the fans on the evaporation and condensation units, controls the operation of the compressor, reports errors. Wired to compressor, evaporator and condenser. The condenser is an outdoor unit located on the street, designed to remove heat from the thermal box. Equipped with a fan to increase the amount of outside air passing through it (to remove more heat per unit of time). Usually installed on the front of the cargo area or on the roof. This improves airflow when the vehicle is in motion. The evaporator is a heat exchanger block, which is located in the cooled volume (in the body of the Gazelle). The air in the thermobox circulates through the evaporator (using the built-in fan) and is cooled. The evaporator unit is also located on the front interior of the body or on the roof. This allows for more convenient loading of the product. Please note that there are two pipes (or hoses) leaving the refrigerator compressor, one for "discharge", the other for "suction". The units are connected according to the following scheme: from the discharge port of the compressor, the tube goes into the inlet of the condenser from the outlet of the condenser, the tube goes to the inlet of the evaporator from the outlet of the evaporator, the tube goes to the suction of the compressor, thereby closing the system The sequence should be described in the installation manual for the refrigeration system you purchased. It should be said that monoblocks are often found (combined unit of condenser and evaporator). Such a block is simply inserted into a slot in the truck bed. In this case, only the compressor discharge port with the condenser intake pipe and the evaporator outlet pipe with the compressor suction port need to be connected, thereby greatly simplifying the installation of refrigeration equipment. If you managed to assemble the equipment with your own hands, you have a direct road to where the car air conditioners are refueled. Filling of freon into the refrigeration circuit should be carried out only by an experienced mechanic; without special tools and knowledge, you will not be able to bring the refrigerator into operation. You can also go to a company that installs refrigerators professionally, but usually their services are more expensive than those who fill air conditioners. Filling a refrigerator with freon costs from 2000 rubles. If you are not ready for self-assembly of the refrigerator unit with your own hands, then it is better to entrust it to professionals. For example, consider the two most popular sets of refrigeration equipment. (price with assembly 3300 Euro) The delivery set includes units for evaporation, condensation, compressor and electronic unit. Also included is a compressor for operation from a 220V network. The hydraulic circuit units are connected with flexible hoses. The units are designed for cooling volumes from 13 to 24 cubic meters. depending on the temperature (from 0 to -20 degrees). All units are made of high-quality steel with a powder coating, the condenser body is made of ABS plastic. The equipment of the Italian company Zanotti is widespread and enjoys well-deserved respect. The only thing that confuses today is the Euro rate. On a well-known classifieds website, we managed to find used kits at prices starting at 60,000 rubles. Read also: Small apartment DIY repair(Price with assembly 2400 Euro) Russian manufacturer of refrigerated trucks. The principle of operation is the same as that of Zanotti. A significant difference is that it does not work from a 220V network with a standard delivery set. The cooled volume is from 11 to 16 cubic meters.(a lower value is at minus 20 degrees, a larger value is at 0 degrees). All units are imported, in fact, only Russian housings and assembly. Quite a decent option on a limited budget. We found a used ear kit from 30,000 rubles. If you decide to order a turnkey installation of refrigeration equipment on a Gazelle, the most correct solution would be to contact an official dealer of the brand of refrigerators you have chosen. This will save you from problems with spare parts and warranty service of equipment, and also implies professional installation of all units. If you like the installation of equipment with your own hands, approach the issue with all seriousness, try to get the advice of an experienced specialist, or at least study the basic principles of refrigeration technology. The main purpose of insulated vans is to transport goods that require compliance with a certain temperature regime necessary to ensure the safety of the original quality and presentation of the transported cargo. No matter how reliable the vans are, without timely and high-quality repairs, they serve much less than their owners want. Repairing the van will help prevent problems and unnecessary material costs associated with poor-quality transportation of goods. Research and Production Enterprise "MODUL" has all the necessary equipment for the modernization and repair of vans of any brands. All work is carried out by highly qualified professionals using modern materials and quality fittings. Specialists of SPE "MODUL" have extensive experience in carrying out restoration work and repair of vans and semi-trailers of famous world brands. Restoration of panels is carried out using European technologies and materials similar to the original, which allows us to guarantee high quality repairs. We offer our clients the following repair services: Repair and replacement of composite sandwich panels; Steel frame repair; Portal repair; Replacement of fittings; Sealing of seams; Repair of floors; Replacement of sealing profiles. General characteristics of composite panels of the "SPE" MODUL "company: We make analogues of panels Schmitz, Lamberet, Chereau, KOGEL, KRONE, etc. Strength... The panel has equidirectional strength and surpasses other panels in strength characteristics due to the use of fiberglass ; Durability... The panel is composite, no molding technology or plywood is used, the panel does not dry out, does not crumble, does not accumulate moisture, the service life is over 10 years; Ease... One square meter of our 50 mm thick composite panel weighs about 7 kg, panels from other manufacturers weigh from 10 kg .; Isothermal... There is a layer in the panel that reduces the influence of the infrared component (sun) on isothermality, therefore, with equal panel thicknesses, the thermal conductivity of the panel is lower. The heat transfer coefficient of an isothermal van from our panels is 0.40 W / m²K with an average value in the industry of 0.5 W / m²K; Price... In a combination of price / quality, the NPP MODUL panel is one of the most efficient panels on the market, our panel on 30-35% cheaper. We offer our customers the following services: Repair of insulated vans, installation of options Repair of insulated vans, installation of options Replacing rubber seals 8 640 rub. (Sealant 55 mm. At the rate of 9.6 lm) RUB 10 350 (Sealant 55 mm. At the rate of 11.5 lm) RUB 14,760 (Sealant 100 mm. At the rate of 12.3 lm) RUB 1,500 / piece (galvanized loop, medium size with replacement) RUB 1,500 / piece (galvanized loop, medium size with replacement) RUB 1,700 / piece (galvanized loop, medium size with replacement) from RUB 3,500 / set (rod locks, handles) from 4 800 rub. / set (rod locks, handles) from 5 600 rub. / set (rod locks, handles) Replacing rubber bumpers from 700 rubles/ piece (quantity on demand) from 700 rubles / piece (quantity on demand) from 700 rubles / piece (quantity on demand) Making a door leaf without fittings 8,000 rubles / ed. (new door leaf 50 mm with rubber seals) from 14,000 rubles / ed. (new door leaf 50 mm with rubber seals) from 25,000 rubles / ed. (new door leaf 100 mm with rubber seals) Replacing the door leaf with fittings from 16,000 rubles / ed. (new door leaf 50 mm. with rubber seals, rod lock, handles, latches) from 20,000 rubles / ed. (new door leaf 50 mm. with rubber seals, rod lock, handles, latches) from 36,000 rubles / ed. (new door leaf 100 mm with rubber seals, rod lock, handles, latches) Replacing two leaves without fittings from 24,000 rubles / ed. (old hinges and fittings remain) from 30,000 rubles / ed. (old hinges and fittings remain) from 48,000 rubles / ed. (old hinges and fittings remain) Replacing two sashes with fittings from 32,000 rubles / ed. (new canvases, hinges and accessories) from 42,000 rubles / ed. (new canvases, hinges and accessories) from 72,000 rubles / ed. (new canvases, hinges and accessories) Replacing the portal (rear gate frame) from 18,000 rubles / ed. (removal of the portal, production and installation of a new one) from 26,000 rubles / ed. (removal of the portal, production and installation of a new one) from 36,000 rubles / ed. (removal of the portal, production and installation of a new one) from 18,000 rubles. (removal of the old, production and installation of a new floor) from 27,000 rubles (removal of the old, production and installation of a new floor) from 42,000 rubles (removal of the old, production and installation of a new floor) from 22,000 rubles. (removal of the old, production and installation of a new floor) from 38,000 rubles (removal of the old, production and installation of a new floor) Read also: Abac compressor DIY repairfrom 56,000 rubles (removal of the old, production and installation of a new floor) from 52,000 rubles. (furniture, manufactured goods, all-metal, etc. negotiable (with the installation of a new insulation) negotiable (with the installation of a new insulation) negotiable (with the installation of a new insulation) Redecorating vans negotiable (removal of dents, cuts, tears) negotiable (removal of dents, cuts, tears) negotiable (removal of dents, cuts, tears) Restoration of van geometry Manufacturing and repair of stretchers Folding the van from the inside from 1500 rubles / r.m. (around the perimeter) from 1,500 rubles / r.m. (around the perimeter) from 1,500 rubles / r.m. (around the perimeter) Increasing the wall thickness of the van from 27,000 rubles. / for installing a refrigerator and reducing heat loss Making a pocket for HOU Production of a stationary isothermal partition Manufacturing of a movable isothermal partition Stationary partition door Door to a movable partition Baffle installation fan + temperature controller Side door using cut-out door leaf An insulated van is essentially a thermos on wheels. The equipment of the van also depends on what we want to get in the end. Installation of refrigerated refrigerators We need a refrigerated truck - we are installing a refrigeration unit. In our company, you can install a refrigerated truck from trusted manufacturers Zanotti (Italy) and TerraFrigo (Russia) with a guarantee. Manufacturing and installation of isothermal partitions It is necessary to carry out separately different-temperature cargo, - we manufacture and install an isothermal partition, and if we also change the proportion of the volumes of the internal compartments, we make it mobile. The logistics are such that there are short gaps between the unloading points - we install flexible vinyl curtains. We want to extend the life of the refrigerator and, accordingly, reduce the consumption of fuels and lubricants - we make vinyl curtains mobile. And with consistent unloading, we move the curtains in the direction of decreasing the working volume of the van. Due to this, the refrigeration unit, receiving a reduced working volume, reaches the set temperature faster. Consequently, the compressor is switched off more frequently and the load on the engine and generator is reduced. Side door insert Side unloading required - install a side door. The configuration, size and material are determined by the customer's choice. The specialists of Thermo Trans Service company will calculate and implement any project of separate transportation and maintenance of temperature conditions. You buy or already have a working car, and the customer demanded a change in the temperature regime of transportation and there was a need for separate transportation, - there is a solution. We will manufacture and install an isothermal partition for you. Execution options are different both in configuration and in cost. Refrigerated truck manufacturers have refrigeration units with the function of maintaining different temperature conditions in divided volumes. This type of HOU maintains a set temperature value in separate compartments. For example, the Zanotti Uno100 MultiTemp. You can also use a conventional refrigeration unit. In this case, cooled air can be supplied to the remote compartment using a temperature-controlled fan. It is the same to carry out heating with the help of an additionally installed air heater, both dependent and there is no heater. All-metal vans based on light duty trucks are also used as refrigerated trucks. Here are examples of work performed by our specialists: Over time, any thing falls into disrepair and wears out. This also happens with isothermal vans. Traffic accidents are no exception. Repair, restoration of vans All this leads to the impossibility of operation and safety of transportation. Thermo Trans Service company provides repair of insulated vans of any complexity. The side was broken, the subframe was shattered, the rear gate was torn off or rotted, all these issues can be resolved. The nature of the damage, the amount of work to be done and the cost are calculated upon the delivery of the repair object to the service station or a detailed photo report to the email address: More examples of the work done. Before work / After completion of work Manufacturing and installation of a portal and gates. This is not all of our work on repairs and installation of additional options on vans. You can also carry out with us: Replacing hinges Replacement of rubber door seals Door leaf repair Roof sealing Repair, replacement of locking fittings Repair, resurfacing of floors Repair of the metal structure of the van Electric welding, gas welding, brazing, ARGON welding Manufacturing and replacement of isothermal panels. While the construction equipment market was sagging with the onset of the crisis, the LCV segment more or less remained afloat. Largely thanks to delivery vehicles, because food and medicine always remain the subject of inexhaustible demand. And in order to deliver them suitable for consumption, certain temperature regimes must be maintained during transportation to the place of sale. Sergey Proskurin, General Director of TPK RusAvtoGid LLC Manufacturers of isothermal vans offer their products in large quantities for almost any chassis. Though foreign, even domestic. In the old fashioned way, the rigid frame subframe is sheathed with aluminum, laminated plywood, galvanized, clad and stainless steel, reinforced with plastic. In general, what the customer has enough money for. Naturally, insulation is also needed. The cheapest option is polystyrene. True, bodybuilders have recently been abandoning it. “One of the most common should be called polystyrene foam or extruded polystyrene foam. It is a tough and durable material with a low coefficient of thermal conductivity. In addition, it is resistant to water and other liquids. Polyurethane foam is also often used, which is rightfully recognized as one of the best heat insulators in the industry. Among its main advantages are an impressive service life, frost resistance, and, of course, the most important thing is a very low heat conductivity.At the same time, regardless of the specific choice, it is worth noting that all of the listed materials have proved to be excellent in van building and can withstand operational loads perfectly, ”says Sergey Proskurin, General Director of TPK RusAvtoGid LLC. Read also: Do-it-yourself grinder repair gear replacementWith the development of technology, some bodybuilders offer frameless options at all. The van is assembled from monolithic sandwich panels with a thickness of 30 to 150 mm using aluminum profiles, which reduces the weight of the car and eliminates thermal bridges between the panel skins. To save money on the purchase of cars with thermal boxes, you can put a new van on an existing chassis. A small survey of companies involved in the manufacture of isothermal vans (they also call them "thermos") showed that the cost varies from 53,000 to 600,000 rubles, depending on the size and materials used. You can install it for a fee from the same contractors or on your own. In the latter case, experts advise to be careful when attaching the van subframe to the vehicle chassis frame. The most inexpensive option would be to use stepladders, however, due to poorly attached anti-shear plates in the rear of the frame and a damping wooden block between the truck frame and the subframe of the van body, an unpleasant embarrassment can occur during operation. It is more reliable to mount the van with brackets. True, you should not skimp on high-quality bolts and damping elements. It is also highly desirable that the rear overhang does not exceed 500 mm. Otherwise, on uneven terrain, the car will cling to the road surface with the body. Insulated vans with high to mid-range heat transfer coefficients tend to do an excellent job of transporting food around town. Even taking into account traffic jams. But if you need to transport food between settlements or over long distances? Here you need a thermovan with an installed refrigerator. In fact, it is a refrigeration unit that maintains a predetermined temperature inside the body. There are many varieties of these. Starting from division by power and the possibility of freezing or simply cooling, and ending with multi-temperature for different compartments and defrosting. By the way, you don't have to buy an entire refrigerated van, but equip an existing isothermal refrigeration unit. “From the point of view of the regulatory framework, this operation is carried out by registering a vehicle through re-equipment. If we talk about the consequences, then initially in the isothermal van there are no elements for the installation of a refrigeration unit. And when deciding on such an improvement, one must be extremely careful about the choice of the refrigeration unit itself. Its weight and the technical characteristics of the van. Moreover, when installing the refrigerator inside and outside the superstructure, reinforcing plates are used. And their disadvantage is that the formation of a thermal bridge is possible, with all that it implies, as they say, ”warns Sergei Proskurin. Sergey Proskurin, General Director of TPK RusAvtoGid LLC: “To extend the life of insulated vans, overloading should be avoided. You also need to pay special attention to the places where the van is attached to the frame. At the joints of the sheets, it is worth paying attention to the condition of the sealant, and the subframe with longitudinal crossbars made of rectangular profiles deserves good protection against corrosion. " If you find an error, please select a piece of text and press Ctrl + Enter. Useful DIY Tips Do-it-yourself gazelle booth How to make a frame for a gazelle video - Center for Journalism Technologies Do-it-yourself gazelle booth Do-it-yourself gazelle booth Do-it-yourself booth for a gazelle Do-it-yourself booth for a gazelle Do-it-yourself gazelle booth photo Do-it-yourself gazelle booth Do-it-yourself gazelle booth Insulated frame-booth for Gazelle How to make a thermobox for a gazelle with your own hands How to make a thermobox for a gazelle with your own hands Van on a gazelle with your own hands From the tent to the thermobox - Body - Gazelist Club Do-it-yourself gazelle booth Sale of the GAZ 3302 Elongated Van at low prices from the Factory of special vehicles Favorit service Do-it-yourself thermo box for a gazelle Repair of a van, a Gazelle car booth. Repair of metal doors of a van, Gazelle booth Repair of insulated vans, installation of options Repair of insulated vans, installation of options Replacing rubber seals 8 640 rub. (Sealant 55 mm. At the rate of 9.6 lm) RUB 10 350 (Sealant 55 mm. At the rate of 11.5 lm) RUB 14,760 (Sealant 100 mm. At the rate of 12.3 lm) RUB 1,500 / piece (galvanized loop, medium size with replacement) RUB 1,500 / piece (galvanized loop, medium size with replacement) RUB 1,700 / piece (galvanized loop, medium size with replacement) from RUB 3,500 / set (rod locks, handles) from 4 800 rub. / set (rod locks, handles) from 5 600 rub. / set (rod locks, handles) Replacing rubber bumpers from 700 rubles / piece (quantity on demand) from 700 rubles / piece (quantity on demand) from 700 rubles / piece (quantity on demand) Making a door leaf without fittings 8,000 rubles / ed. (new door leaf 50 mm with rubber seals) from 14,000 rubles / ed. (new door leaf 50 mm with rubber seals) from 25,000 rubles / ed. (new door leaf 100 mm with rubber seals) Replacing the door leaf with fittings from 16,000 rubles / ed. (new door leaf 50 mm. with rubber seals, rod lock, handles, latches) from 20,000 rubles / ed. (new door leaf 50 mm. with rubber seals, rod lock, handles, latches) from 36,000 rubles / ed. (new door leaf 100 mm with rubber seals, rod lock, handles, latches) Replacing two leaves without fittings from 24,000 rubles / ed. (old hinges and fittings remain) from 30,000 rubles / ed. (old hinges and fittings remain) from 48,000 rubles / ed. (old hinges and fittings remain) Replacing two sashes with fittings from 32,000 rubles / ed. (new canvases, hinges and accessories) Read also: Water pump kid DIY repairfrom 42,000 rubles / ed. (new canvases, hinges and accessories) from 72,000 rubles / ed. (new canvases, hinges and accessories) Replacing the portal (rear gate frame) from 18,000 rubles / ed. (removal of the portal, production and installation of a new one) from 26,000 rubles / ed. (removal of the portal, production and installation of a new one) from 36,000 rubles / ed. (removal of the portal, production and installation of a new one) from 18,000 rubles. (removal of the old, production and installation of a new floor) from 27,000 rubles (removal of the old, production and installation of a new floor) from 42,000 rubles (removal of the old, production and installation of a new floor) from 22,000 rubles. (removal of the old, production and installation of a new floor) from 38,000 rubles (removal of the old, production and installation of a new floor) from 56,000 rubles (removal of the old, production and installation of a new floor) from 52,000 rubles. (furniture, manufactured goods, all-metal, etc. negotiable (with the installation of a new insulation) negotiable (with the installation of a new insulation) negotiable (with the installation of a new insulation) Redecorating vans negotiable (removal of dents, cuts, tears) negotiable (removal of dents, cuts, tears) negotiable (removal of dents, cuts, tears) Restoration of van geometry Manufacturing and repair of stretchers Folding the van from the inside from 1500 rubles / r.m. (around the perimeter) from 1,500 rubles / r.m. (around the perimeter) from 1,500 rubles / r.m. (around the perimeter) Increasing the wall thickness of the van from 27,000 rubles. / for installing a refrigerator and reducing heat loss Making a pocket for HOU Production of a stationary isothermal partition Manufacturing of a movable isothermal partition Stationary partition door Door to a movable partition Baffle installation fan + temperature controller Side door using cut-out door leaf An insulated van is essentially a thermos on wheels. The equipment of the van also depends on what we want to get in the end. Installation of refrigerated refrigerators We need a refrigerated truck - we are installing a refrigeration unit.In our company, you can install a refrigerated truck from trusted manufacturers Zanotti (Italy) and TerraFrigo (Russia) with a guarantee. Manufacturing and installation of isothermal partitions It is necessary to carry out separately different-temperature cargo, - we manufacture and install an isothermal partition, and if we also change the proportion of the volumes of the internal compartments, we make it mobile. The logistics are such that there are short gaps between the unloading points - we install flexible vinyl curtains. We want to extend the life of the refrigerator and, accordingly, reduce the consumption of fuels and lubricants - we make vinyl curtains mobile. And with consistent unloading, we move the curtains in the direction of decreasing the working volume of the van. Due to this, the refrigeration unit, receiving a reduced working volume, reaches the set temperature faster. Consequently, the compressor is switched off more frequently and the load on the engine and generator is reduced. Side door insert Side unloading required - install a side door. The configuration, size and material are determined by the customer's choice. The specialists of Thermo Trans Service company will calculate and implement any project of separate transportation and maintenance of temperature conditions. You buy or already have a working car, and the customer demanded a change in the temperature regime of transportation and there was a need for separate transportation, - there is a solution. We will manufacture and install an isothermal partition for you. Execution options are different both in configuration and in cost. Refrigerated truck manufacturers have refrigeration units with the function of maintaining different temperature conditions in divided volumes. This type of HOU maintains a set temperature value in separate compartments. For example, the Zanotti Uno100 MultiTemp. You can also use a conventional refrigeration unit. In this case, cooled air can be supplied to the remote compartment using a temperature-controlled fan. It is the same to carry out heating with the help of an additionally installed air heater, both dependent and there is no heater. All-metal vans based on light duty trucks are also used as refrigerated trucks. Here are examples of work performed by our specialists: Over time, any thing falls into disrepair and wears out. This also happens with isothermal vans. Traffic accidents are no exception. Repair, restoration of vans All this leads to the impossibility of operation and safety of transportation. Thermo Trans Service company provides repair of insulated vans of any complexity. The side was broken, the subframe was shattered, the rear gate was torn off or rotted, all these issues can be resolved. The nature of the damage, the amount of work to be done and the cost are calculated upon the delivery of the repair object to the service station or a detailed photo report to the email address: More examples of the work done. Before work / After completion of work Manufacturing and installation of a portal and gates. This is not all of our work on repairs and installation of additional options on vans. Video (click to play). You can also carry out with us: Replacing hinges Replacement of rubber door seals Door leaf repair Roof sealing Repair, replacement of locking fittings Repair, resurfacing of floors Repair of the metal structure of the van Electric welding, gas welding, brazing, ARGON welding Manufacturing and replacement of isothermal panels. Rate the article: Grade 3.2 who voted: 85
