DIY swing repair graco

Swing GRACO repair scheme

After plugging in, the swing started working

worked for a while then there was a smell

Attempts to remove the plug did not lead to anything, and even an urgent need

there is no self-tapping screw located under the hub wheel easily unscrews

Phillips screwdriver plastic is pretty soft

It is necessary to unscrew it with the last screwdriver, do not pull it out, but hold it

self-tapping screw and open the halves of the case then with the reverse

sides on a self-cutter we sculpt plasticine or wind something

a piece of rubber for example a self-tapping screw should not fall out of the socket

if it falls out, it will fall into the hub-wheel then it is difficult to catch

If the gearbox makes noise, it must be lubricated with lithol

My 1.5 ohm resistor burned out, the zener diode Z1 burned out which was unknown

I think 5.6 volts is not a parametric stabilizer as you might think

it is a simple overvoltage protection

The adapter gives out 5 volts, but apparently its stabilization system

it does not work very well, it gave out a voltage above 5 volts

Zener diode broke through the resistor burned out but the microcontroller still

Soldered the resistor turned on; the motor started immediately

but not one button did not work and the backlight too

fuse B1 was intact

The motor was running at medium speed and swinging the swing

however, with a small load, the small child was quite rocked

bliiin !! just now I was just discussing with my family whether to buy a beu from a girl from the Bolsheviks for 2500 or buy new ones with a card.
((((((((I thought hard about buying second-hand.
and in the internet did not try to find repairs by search engines.

well, you are in no hurry to judge. on one such unfortunate occasion. we bought a used one. my girlfriend. her friend. and many more of my friends. and everyone is here at DO. and NOBODY complains. : 080. everything works fine. you need to check well on the spot. and there will be no complaints.

Noooo. I have no complaints. I ask, what would you do in my place? It’s just a shame that you could buy a working swing for the same money. It wasn’t lucky. I couldn’t sell a broken thing (she saw that they didn’t swing, and began to swing them with her hand).

well, if you like. I would bring them back: 015:. and returned. it is not decent on the part of the seller. if an ALREADY not working swing was actually sold. : wife:

... and during transportation they could not accidentally break. 005:

Maybe call the service center. Can undertake to fix it. And it is better to take them back so that it would not be common to sell broken pieces. And that that 2 weeks have passed?

I wouldn’t mind, but I didn’t save her phone, but now it’s impossible to find. All the hope is that the girl will read and contact me. And it’s somehow not solid to take her home. 001:

I wouldn’t mind, but I didn’t save her phone, but now it’s impossible to find. All the hope is that the girl will read and contact me. And it’s somehow not solid to take her home. 001:

... which means not solid. You have purchased an item. paid the honest amount requested by the seller. the product was found to be unusable. Your right to get your money back is absolutely normal. ... well, of course, if there are still five thousand to purchase a new swing .. for solidity then. please.

... and in a personal did not try to write to HER.

well, if you like. I would bring them back: 015:. and returned. it is not decent on the part of the seller. if an ALREADY not working swing was actually sold. : wife:

... and during transportation they could not accidentally break. 005:

No, she just put in new batteries, they didn't start swinging the swing right away. the girl began to insert and remove the batteries again. Then she said: “do you hear that the motor has started working?” and pumped up the swing with her hand. And that's all. They brought home with her batteries, it does not work. ran away bought new ones.replaced, the swing began to swing at the highest speed (6) and if you swing your hand strongly at first, if you switch to a different speed, then they stupidly stop.

... and in a personal did not try to write to HER.

I don’t know anything about her except the address. I wrote that I wanted to buy a swing, and she wrote my phone directly to the topic and immediately deleted it later.

I don’t know anything about her except the address. I wrote that I wanted to buy a swing, and she wrote my phone directly to the topic and immediately deleted it later.

some strange situation. I do not understand .. for what and why, and in general, the already NOT WORKING swing was purchased. since you claim that you saw how the swing did not work in the right way even then. why hurry. from milen are sold to DO.

... then write to the moderators. ask for advice and help from them. but this is only if you are ABSOLUTELY sure of the seller's dishonesty!: ded:

well then, do not hesitate and do not be discouraged. take the swing back to the seller. in this case, you still have nothing to lose.

... after you get your money back, use the search and select the swing you like the most on DO. now there is a huge number of proposals.

organize tremendous pleasure for your baby. ))) .. my son loves to swing very much: love. especially with music, without music he is bored.

SORRY THAT IS A LITTLE NOT ON THE TOPIC, BUT IT'S INCREASED. : flower :: flower :: flower:

We bought a swing here at BEFORE it worked great. The only thing is while the child is small and light, they swing well, but when the child grew older it became difficult for them to swing, but they are supposed to be up to 11 kg.
I packed the swing in a box and sent it to my friend to Yekaterinburg by the transport company. A month later, a friend writes to me that they use the swing, but they swing the child by hand, because “if the swing is turned on, it cannot creak”. A month later, her husband got around, he disassembled the mechanism and lubricated everything, put it back together and now they use the swing with pleasure, everything works, nothing creaks.
Try to disassemble and see what's what, maybe something jumped off somewhere, maybe you need to lubricate.
By the way, did you assemble the swing correctly? It is not so easy to collect them.

PS: Yes, we also have Durasel batteries, but they were enough for us for half a year.

They put in new batteries right away, and during the examination, the girl put new ones (she bought them on purpose), but she didn’t pump there herself, but we didn’t know then how they should work.

I have them and new stuff, sometimes they do not turn on, so what can be so.

Mobile app"Happy Mama"

4,7 It is much more convenient to communicate in the application!

maybe the motor does not work but just hums

may not snap into place, or something else

Call and ask why they did not warn about the marriage.

you will talk to the seller.

you couldn't break them in one day

It's better not to take such things, to be honest, I am generally against boo things, I would sell them to people. Of course, if you take them from acquaintances or from friends, then of course it depends on what. Well, don't worry too much.

maybe it didn’t fully snap into place? ... I don’t even know ... when we took it, we didn’t even change the batteries (we only worked on batteries) ... although we didn’t swing much - we just loved to lie in them))) try to call the owner of the swing , if they do not take them back, they can at least prompt what could be the cause of the breakdown.

there they work both from the mains and from the batteries everything checked the husband climbed climbed in the end they saw where the motor is there inside the glue ... he could not open them he took off everything ... in the end he realized that they were taken apart and could not make out to the end

Yesterday I almost quarreled on psychos, in the end, I threw it out and threw it out onto the balcony ... I say let her choke on this money, we will definitely not swear ... I call all day humanly just to talk, he can tell you where they did it or something like that ... fig ... you don't answer either from 1 number

there was a children's swing with speed buttons and music, on 3 batteries, I plugged in an adjustable domestic converter and it worked from it, apparently at some point the converter said hello and something in the swing burned out, now it just threshes at maximum speed regardless from the power source and controls do not work.

visual inspection of the board revealed nothing:

the controller is flooded and it seems that there are no signs of combustion, but it does not heat up, etc. I think I'm dead.

the child does not like swinging at maximum speed 🙁

the electro-mechanical device is as follows - a motor through a reducer turns a block with a spring through a pedal.

the controller, most likely, considered the angle of inclination of the block with a spring and stopped it at the right moment.

the search for spare parts for this swing is unsuccessful, neither ebey nor others do this.

I have a primitive arduinka, at 328 mega, from the lessons for beginners I made a sketch that, depending on the position of the potentiometer, adjusts the duration of the "flashing diode"

I just thought that I could do the same through this potentiometer by the duration of the current supply to the motor and by maintaining a pause, but a relyukha is needed, because A 40 mA motor will not start instead of an LED)) but something is all about 12 volts in the store, and in general, the coil works from 100mA, I could not find a suitable relay at once. if only five for aliexpress to wait a month?

in principle, he himself asked and answered himself (about the solution), but maybe the collective mind will tell you better?

Reason suggests reading here and using a transistor switch.

BWN: link won't open 🙁 but I'll google about TC, thanks!

BWN: link won't open 🙁 but I'll google about TC, thanks!

Strange, I'm fine. Look for Arduino Basic Connections.

The controller is most likely alive - find 5 volts on the board.

The "bunch" of transistors near the connector are the motor keys. One of them is broken. And instead of PWM, it is “on” all the time.
Replace everything without thinking about analogues. Judging by their size, they are field workers. for a couple of amperes.

propose to change those that are below 3 pieces? ok, I'll try, if it doesn't work out, I will, on the recommendation of arduino connections, do just such a scheme

Look at the shutter there is a deogatnya? Rather, at the output of the processor. (You can sketch on Arduin if you don't have an oscilloscope).
It is advisable to remove the transistor. It is the one that goes to the motor.
By the way, with a short circuit (and sometimes just by themselves), small resistors can go into an open circuit. Or solder.

U2 is the 78L05 gimbal. Check if it gives 5 volts.

By the way, the transistor of the motor can most likely control Q4. Why else is he there?
Look where the motor wire comes out.
There should be a high plus on the motor, and the transistor gives it ground.

I have a multimeter at home, I will stick in the batteries and I will need to measure on the extreme legs where there are 5 volts, i.e. Breakout, right?

No. According to the scheme above: what is on the legs of the transistor in relation to the ground, Volts should be measured.
(it is easy to find on large capacitors - marked with a stripe).
At the same time, look at the pluses of the conduits - one should have 5 volts, on the other - the motor power (input from the adapter)

I tested both, checked the circuit against the datasheet for each, one turned out to be npn the other pnp, on both everything according to the circuit, the loop has 5v and the second 3v.

Along the way, I found out that the manufacturer, all the same, does not just control the position of the gearbox rotor .. just turn it so slowly - it still shakes the swing to the fullest ..) 5v - the motor threshes, 1.5v - it seems to turn sluggishly - but still if you get into the rhythm - then the swing reaches its full amplitude.

1. Find the transyuk that controls the motor.
Hint: you have to go from the motor. Trace down to the processor. Is there a signal there?

2. About your "position control". This is a general word, and we are repairing a specific piece of iron.
Are these the contacts of the limit switches? Is it a potentiometer? (I do not believe in the encoder, it is expensive for such a drive)

You have a simple pulse counter. The diode is on - the one that shines? (measure voltage) 2-3 Volts
Are there impulses when turning? On a photodiode-transistor. Where are they going? Trace down to the processor.

Often contact is lost in vias (inside them)

Hello, basically the same problem with the board. The swing runs on batteries, I wanted to do it from the mains, I connected everything but mixed up the polarity and now the board does not respond in any way. Who can help with advice?

Hello, basically the same problem with the board. The swing runs on batteries, I wanted to do it from the mains, I connected everything but mixed up the polarity and now pay no way does not respond... Who can help with advice?

not the same, as an option, to show her to the guys that they are repairing cell phones - if it's quite simple. If it is more difficult, we look for “+” and draw a diagram of at least a few elements from the “+” power connector, if there is a direct connection with the process, your chances are sharply rushed to the scrap metal.

In drawing a circuit, I'm not a boom-boom, but I will say that the board is one-to-one as in the author's photo above. I think to solder the contacts, I read on one of the forums that it might be cured

90% that the board is not repairable

Is it possible to get a new and used board somewhere?

unlikely. it's probably easier to make your own than to find where

sadness, trouble, we will try different options. If possible, unsubscribe

sadness, trouble, we will try different options. If possible, unsubscribe

carry in cell repair, the most reliable option in your particular case

He who seeks will find. I gave it to the masters, as advised. They raved with their hands, they say, we don't know (I just didn't want to take it). He took it, sat down calmly and began to ring up. Found. When the contacts are closed, everything works. I think so, the fusible fuse just burned out, I highlighted it in the photo.

lucky if so) just no longer looks like a fuse

At first I thought it was a resistor, underneath it on the board it says F1. Having rummaged a little on the internet, I found an F-fusible fuse for information) Now it works for me both from batteries and from the network, the small one is happy)

He who seeks will find. I gave it to the masters, as advised. They raved with their hands, they say, we don't know (I just didn't want to take it). He took it, sat down calmly and began to ring up. Found. When the contacts are closed, everything works. I think so, the fusible fuse just burned out, I highlighted it in the photo.

means such masters :). is it like F1 written there? fuses come in different cases, you're in luck - in the sense of not entirely bad China, find a thin wire (a hair is very thin) and carefully solder it, it may come in handy again ..

Believe it or not, I did it, only on the other side) yes F1 is there.

Hello, did your motor spin after a short circuit or was it silent? It's just that my trouble is that the swing stopped swinging by inserting the adapter plug and the motor immediately starts to turn on the speed buttons, it doesn't respond.

there was a children's swing with speed buttons and music, on 3 batteries, I plugged in an adjustable domestic converter and it worked from it, apparently at some point the converter said hello and something in the swing burned out, now it just threshes at maximum speed regardless from the power source and controls do not work.

visual inspection of the board revealed nothing:

the controller is flooded and it seems that there are no signs of combustion, but it does not heat up, etc. I think I'm dead.

the child does not like swinging at maximum speed 🙁

the electro-mechanical device is as follows - a motor through a reducer turns a block with a spring through a pedal.

the controller, most likely, considered the angle of inclination of the block with a spring and stopped it at the right moment.

the search for spare parts for this swing is unsuccessful, neither ebey nor others do this.

I have a primitive arduinka, at 328 mega, from the lessons for beginners I made a sketch that, depending on the position of the potentiometer, adjusts the duration of the "flashing diode"

I just thought that I could do the same through this potentiometer by the duration of the current supply to the motor and by maintaining a pause, but a relyukha is needed, because A 40 mA motor will not start instead of an LED)) but something is all about 12 volts in the store, and in general, the coil works from 100mA, I could not find a suitable relay at once. if only five for aliexpress to wait a month?

in principle, he himself asked and answered himself (about the solution), but maybe the collective mind will tell you better?

The address: Maryinsky Park street, Moscow

The offers are visible only to the customer.

It is necessary to assemble and install a new kitchen from Leroy merlin. Size 2.10 m If, I will help myself. Work on Saturday, October 20. We will agree on the time with the contractor. The kitchen is already in stock.

Edward H.Mytischi Novomytishchinsky prospect 43, building 1

One interior room and one toilet. Install platbands and kind on the door in the room. All materials purchased

Elena Moscow, Southern Administrative District, Tsaritsyno District

Galina Moscow, Moskovsky, 3rd microdistrict, 5

Due to the change in the location of the fixtures, the ceiling needs to be replaced, 17m2

Oksana R. Moscow, Berezovaya alley, 17k2

Installation and repair of doors, locks 🏯

Nasir D. Moscow region, Balashikha, Yantarny microdistrict, Ring street, 20

Yul @
A thousand passed

Is registered: 17.03.2009
Posts: 1334
Location: Tamboff

marviha1
Oriental smoothie

Is registered: 28.02.
Posts: 2157
Location: TMB

Yul @
A thousand passed

Is registered: 17.03.2009
Posts: 1334
Location: Tamboff

marviha1
Oriental smoothie

Is registered: 28.02.
Posts: 2157
Location: TMB

Is registered: 05.05.
Posts: 15862

ALEXX777
Dza expert

Is registered: 12.08.
Posts: 1998

Is registered: 22.02.
Posts: 30173

Yul @
A thousand passed

Is registered: 17.03.2009
Posts: 1334
Location: Tamboff

Is registered: 22.02.
Posts: 30173

Yul @
A thousand passed

Is registered: 17.03.2009
Posts: 1334
Location: Tamboff

ALEXX777
Dza expert

Is registered: 12.08.
Posts: 1998

Yul @
A thousand passed

Is registered: 17.03.2009
Posts: 1334
Location: Tamboff

marviha1
Oriental smoothie

Is registered: 28.02.
Posts: 2157
Location: TMB

Agreed, agreed just there is no time this week.
_________________
I make books, any printing!
Digitization of video cassettes!
Electronics repair

Last edited by marviha1 (Sep 02, Wednesday 7:26 pm, 2015); edited 1 time in total

Why can't a person find the videos they want on Youtube? The thing is that a person cannot come up with something new and look for it. He was out of fantasy. He has already watched a lot of various channels, and he no longer wants to watch anything (from what he watched earlier), but what to do in this situation?
In order to find a Youtube video that suits your needs, it is imperative to keep searching. The harder your search is, the better your search result will be.
Remember that you only need to find a few channels (interesting), and you can watch them for a whole week or even a month. Therefore, in the absence of imagination and unwillingness to search, you can ask your friends and acquaintances what they are looking at on Youtube. Perhaps they will suggest original vloggers that they like. You, too, may like them, and you will become their subscriber!

Online mp3 cutting is convenient
and a simple service to help you
create a musical ringtone yourself.

YouTube video converter Our online video
the converter allows you to download videos from
YouTube website in webm, mp4, 3gpp, flv, mp3 formats.

These are radio stations to choose from by country, style
and quality. Radio stations all over the world
over 1000 popular radio stations.

Live broadcast from webcams is made
absolutely free in real
time - broadcast online.

Our Online Television is more than 300 popular
TV channels to choose from, by country
and genres. Broadcasting of TV channels is free.

A great opportunity to start a new relationship
with a continuation in real life. Random video
chat (chat roulette), the audience is people from all over the world.

Girls, the other day I bought a boo rocker grako. Average price on the site. I went and looked at it, everything is ok. The seller showed everything, everything works. I asked if everything was ok with the rocking mechanism, did they change it? To which they replied - no, they did not change it. Well, I bought it. Here we use it for 2 days and I noticed that at all speeds it shakes at the same speed. Who has such a swing - is the speed in 1st gear very different from 6th? And what should I do - ask for a refund or am I myself to blame and should have looked at the purchase? It was rasterized shorter ((((

Save with LetyShops cashback!

Register now and get Premium account.

The Graco brand is one of the most popular labels for the production and sale of baby products.They make not only electronic swings, but also beds, playpens, walkers, highchairs, strollers, car seats and many other goods necessary for small children.

This company was founded more than seventy years ago - in 1942. Initially, the direction in which the Graco brand was engaged was metallurgy, namely the creation of metal goods, and there was no talk of setting up the production of children's products. Everything changed when the chief engineer of the company, and also the father of nine children, George Sant came up with the idea of ​​creating an electronic children's swing.

This device was supposed to help parents in rocking the child before bedtime, and Saint, like no one else, was well aware of the problems that families with babies face. For about a year and a half, an engineer from the Graco company was developing a special mechanism that was supposed to form the basis of an electronic swing.

After this time, Sent managed to achieve what he wanted and create the first baby swing for newborns. This device was an incredible success among parents, who were helped by the swing to a great extent. The next step in the creation of products for a children's niche for the Graco brand was a car seat for babies. And then the company began to expand and completely switched to the production of children's products, which are getting better and better every year.

Swing Grako is an indispensable assistant for all mothers, which will rock the baby while parents are busy with household chores. All swings are made of high quality materials, have many additional functions and are quite convenient to assemble. What is remarkable, the baby can be in this device from birth, so that even the smallest and most capricious kids can calm down while rocking.

The Graco swing has a very comfortable and simple design, the frame is very strong, and the seat with an adjustable backrest will allow the child to be in several positions, depending on the desire. There are swings with an adapter or battery operated. Models with an adapter are very convenient for home use, so as not to constantly change the batteries. The second option is perfect for camping trips or just for a trip to visit relatives and friends. None of the electronic swing models have sharp corners or other dangerous devices that can harm your baby. This device has several different models with a very beautiful and modern design that will fit into any room and will not stand out from the general color scheme.

One of the main advantages of the Graco swing is its versatility. They have several swing modes, as well as additional devices that entertain the child. So, all models of the swing are arranged with musical accompaniment with several melodies, as well as a set of toys developing for fine motor skills, which are hung at the level of the baby's eyes.

Also, you can connect a player to some models in order to independently decide what kind of music the child will listen to. Plus, you can set a timer that automatically stops the swing after the child falls asleep.

All Graco electronic swings are made of environmentally friendly and pleasant materials that do not cause allergies or irritations. This is a very important point for many parents who prefer to buy only high quality products for their children.

The Graco company produces several models of electronic children's swing, which differ not only in appearance, but also in functionality. Each line is worth considering separately.

This innovative model has unique characteristics that differ from the rest of the swing, both externally and in terms of the structure of the mechanism. The Graco Sweetpeace, unlike other models, has only one anchor point on which the seat is held and it does not move along the usual trajectory of a swinging swing, having three different directions and imitating the movements of the mother's hands while lulling the baby.This electronic swing has six swing speeds, vibration, musical accompaniment and the ability to play music from an MP3 player. The set also includes toys that develop children's motor skills, a teether and a small mirror.

For cases when the child sleeps on the balcony or faces the sun, this model is specially equipped with a hood that can be lowered during sleep so that the sun does not interfere with the baby. One of the advantages of the model is its color scheme, which is made in calm, classic colors that do not irritate the eyes of the newborn with its brightness.

The Graco silhouette line is composed of several models with different designs and colors. These models of electronic swings can be designed for both newborns and slightly older children. They have a backrest that can be adjusted in several positions, as well as a double headrest for a more comfortable fit of the baby. Six swing speeds and light vibration will quickly calm the child and set him up for a restful sleep, and the music block will replace mom's singing. The presence of a timer provides the ability to automatically turn off the swing, and a small table will serve as a good stand for children's toys.

Graco Lovin'hug is a model with fifteen different melodies that reproduce sounds of nature in a music unit with volume control. This is a transforming swing that is suitable for both newborns and slightly older children, thanks to a comfortable seat with a removable pad and headrest.

The five-point belt ensures complete safety of the child in the swing, and the ability to change the position of the backrest, additional convenience and comfort, as well as the ability to use this device for feeding. Additionally, the swing is equipped with a removable table, which can be designed for a child's toys. An additional advantage of this model of electronic swing is a rotating mobile with toys, which is installed at the top of the swing.

Graco's sun loungers are very convenient devices like electronic swings, but more easy to carry. They can swing both from the parental hand and thanks to the child himself. The chaise longue has a metal support and a soft seat with a removable pad and a five-point seat belt.

The Swing N'Bounce series is very comfortable and does not take up much space due to its compact dimensions. They fold easily and quickly and weigh significantly less than other models, have six swing speeds and two vibration options. The music block and toys are a nice addition to the swing. Also, they have a removable table and a special lining for newborns.

It is quite simple to assemble children's electronic swing of the Graco brand. They have very detailed and easy-to-understand assembly and disassembly instructions.

The Sweetpeace model is different from others, so it is also assembled in a special way. First of all, you should take two metal arcs and connect them until they click, and then install the footrest with the mechanism and also wait for the click. Next, the chair holder must be connected to the footboard, assemble the seat itself, putting on a fabric cover and a hood, and then install it on the swing. Last but not least, the game block is fixed.

The rest of the models are slightly identical in appearance and have the same assembly instructions. Initially, metal racks are revealed, on which the swinging mechanism must be fixed. Then a seat is attached to the structure, on which a cover is previously put on, with holders for a swing. Without fail, all actions must be performed until a control click, which proves that the device is firmly fixed.After the swing is assembled, a table and a toy block are installed on them. The music panel is attached to one of the racks.

Dismantling the Graco swing occurs in the same way as the assembly, only in the reverse order: at the beginning, the chair is removed, then the metal holders are removed, and then the racks are folded. If you have difficulties with assembly, you can always watch a video tip.

To all the other pluses of the children's electronic swing by the Graco company, one more is added, namely, the rather democratic price of these units. The simplest and smallest swing will cost parents three thousand five hundred rubles, models with large dimensions will cost about nine thousand. Well, the most expensive model is a swing with an electronic mechanism Sweetpeace, for which you have to pay about seventeen thousand rubles.

There are a lot of reviews about the Graco electronic swing on the Internet. Mostly they are positive, because the swing has become a real lifesaver for many parents, which enables the mother to go about her business and rock the baby before going to bed, lito will simply take him for the time of mother's absence. Many parents note the ease of assembling and disassembling models, some mothers boast that they could easily assemble the swing on their own without the help of dads.

The beautiful appearance and pleasant color scheme also pleases many parents, and the toys included in the kit are good both for the child's stay in the swing and for playing outside the device.

Unfortunately, not all parents are happy with the swing. There are reviews where parents complain about the too heavy weight of some models. Also, not all children feel comfortable in a swing, this is especially reflected in very young children up to three months old. And this is not surprising, because newborns need motherly warmth, but upon reaching the age of three months, you can safely put the child on the swing.

Yul @
A thousand passed

Is registered: 17.03.2009
Posts: 1334
Location: Tamboff

marviha1
Oriental smoothie

Is registered: 28.02.
Posts: 2157
Location: TMB

Yul @
A thousand passed

Is registered: 17.03.2009
Posts: 1334
Location: Tamboff

marviha1
Oriental smoothie

Is registered: 28.02.
Posts: 2157
Location: TMB

Is registered: 05.05.
Posts: 15862

ALEXX777
Dza expert

Is registered: 12.08.
Posts: 1998

Is registered: 22.02.
Posts: 30173

Yul @
A thousand passed

Is registered: 17.03.2009
Posts: 1334
Location: Tamboff

Is registered: 22.02.
Posts: 30173

Yul @
A thousand passed

Is registered: 17.03.2009
Posts: 1334
Location: Tamboff

ALEXX777
Dza expert

Is registered: 12.08.
Posts: 1998

Yul @
A thousand passed

Is registered: 17.03.2009
Posts: 1334
Location: Tamboff

marviha1
Oriental smoothie

Is registered: 28.02.
Posts: 2157
Location: TMB

Agreed, agreed just there is no time this week.
_________________
I make books, any printing!
Digitization of video cassettes!
Electronics repair

Last edited by marviha1 (Sep 02, Wednesday 7:26 pm, 2015); edited 1 time in total

Please tell me where the Graco service centers are located? We have ... our fault. The microcircuit of the Graco Swing n 'Bounce chair has burned out

Published on April 23, 2010 4:16 pm

The service center of the company Paritet Trade, which imports Graco, is located at ul. Martirosyan, 20 (tel. (044) 242-49-81, 242-55-44)

Thank you for your answer. The point is that we called here. They don't have what we want.
Is this the only Graco Service Center? No others? ((((

Hello, I am interested in purchasing a new or used motor for a graco sweetpeace swing. Thank you.

Victoria, if you are on the motion sicker, then it is still relevant. I am also repairing. My number is 067-76-73-615, 050-99-24-804., Viber: +380677673615.

Yes, and they told me that. It's a pity. Perhaps someone can tell you how you can fix this block.

I will repair the rocker block for you, we will agree on the repair price. My e-mail address:

we opened it (there are such hooks on both sides) - it turned out that we had to solder one wire, and we didn’t have a soldering iron, but there was a ring at the place of soldering (this is how it is arranged there), and we just screwed on this very wire. We were secretly told that this is the main problem of this center.
In general, now we are all right.
The rocking center helps sooo much!
We fall asleep there every time, and then I carry the baby to the crib 🙂

And you are from Dnepropetrovsk.

Good afternoon Tatiana! I help the people of Kiev, but let's communicate through the mailbox

If you decide to use Nova Poshta, then indicate the warehouse No. 14

Surname and other necessary data for the specified options.

The Kiev service center sells blocks as a whole, they do not bother with repairs.

And we broke it, it's still a shame
I could have taken it from the supplier, at a wholesale price, but the beige ones were discontinued, they did not want a different color
I took the boo from the girl. she said that they did not use it, well, yes, the condition is excellent. but. two weeks later he broke down with us.
HERE YOU AND BU.
There is no guarantee, if the store is at least subject to repair, and so they threw out 1900 UAH.

You do not need to throw it away, I will try to solve your problem. 0677673615

girls service center moved here is the new phone number 044-453-13-04

Who knows how much it costs to replace a wheel on Graco's wheelchair?

girls, tell me, and the wheels from the strollers are replaced?

Yes, the wheels change, but the wheels are really better to order in the Kiev service center. Too much circle will pass the wheel if through me. Kiev-Dnepropetrovsk-Kiev.

Girls! Can you please tell me where in Ternopil you can find the Graco service center? Our swing broke .. 🙁

Send by New mail to Dnepropetrovsk. I will repair and also send back to you.

maybe someone needs a block of wheels Graco city sport, new ,. was not useful, I bought 125, I will give it for 100

Hello, who repaired the Graco sweetpeace - how does it open? We also need to solder the wiring there, but we cannot open it, we are afraid to damage it, it just does not open.

The block opens in an elementary way, the service center cannot open it, but I can.

The mechanism is hiding there, of course, and then how to open it. Unscrew the screws and how to open the latches of the internal locks? Only break, the appearance deteriorates.

The service center does not take repairs. and I take it.

Opening the rocker is not so easy and cannot be explained on the fingers. Actually, the block is made for one-time use. Latches-latches inside the case, it's not for nothing that the service center does not take it for repair. This is a marine business, parts and spare parts purchased by the service center for repair were thrown away due to the complexity of disassembly. After attempting to open it on its own, deep scratches, cracks and crevices remain.

tell me and really buy a power cord (which is in the outlet) to Graco sweetpeace lost through inattention (((

It is easy to buy a power supply, + must be inside, outside minutes. Power supply unit 5 volts, 1000mA. (500mA will work too, only it will be slightly warm)

Our Graco Swing n 'Bounce chair also broke. Please tell me and sk. said it is worth replacing the block.

The new block costs UAH 850. The Kiev service center does not repair rocker cranes, they can only sell them (they do not know how to open it)

Good afternoon. I was very interested in this service center, but I'm from Zaporozhye, maybe someone knows their mobile phone number)

go to the store "Barbie" or "bebyzone" these two of our stores are located in the building of the chambers of commerce, you can transfer for me to repair.

Good afternoon dear semshell. on Sunday 1 April, I will be in Zaporozhye. In the Barbie store I will prepare computers for stocktaking. If possible, come with a motion sicker. I will repair it in Dnepropetrovsk and give it to you by New mail.

The stores "Barbie" and "bebyzone" are located in the former building of the Chambers of Commerce

My phone number is 0677673615 Slava. We will agree on the cost of repairs.

Good day! We have a broken Graco sweetpeace rocking center - stopped rocking. Maybe someone had such a problem, what to do, where to go?

Good day. The girls need help, I bought a rocker through the flowerbed, but it turned out to be broken. Scrapped, and there is a lack of some spare part between the axle and the gear. Tell me what should be there, please!

Good time of the day Olga. I don’t want to be pushy. but if you haven't thrown away the rocker and needs to be repaired, I will.

You can agree and send it by Nova Poshta.

my phone number is 0677673615 Slava.

Girls, good afternoon, I need help. I bought a grako nozzle pump through the flower bed, the seller said that everything was in order, but it turned out that he did not have a gasket between the nozzle pump and the container where snot was collected, and without it, the nozzle suction pump pumps out very weakly, I could not find it anywhere on the Internet.

Hello. We also have a broken Graco Silhouette. The control panel does not work, there is no music and does not pull the child, swinging without the child. Tell me what's what. Thank you.

Good afternoon Galina! The breakdown of your rocker as described is probably serious. I'm ready to watch. I live in Dnepropetrovsk. Kievans apply, the service center does not take blocks for repair, they can sell you a new one. If you dare, let's use New mail, warehouse number 14

You will need to indicate the phone numbers of people with whom I worked, raise my base and write to you.

All I need from you is a rocker unit without all kinds of attachments and its power supply.

Hope for a successful renovation.

Galina, what did you decide to do with the block. Let's try to run it?