DIY nespresso capsule coffee maker repair

In detail: do-it-yourself nespresso capsule coffee maker repair from a real master for the site my.housecope.com.

How can you save on capsules for your Nespresso machine and drink your favorite coffee inexpensively?
Solution Yes:
Buy reusable capsules!
You can buy with a discount here:
You can buy for the promotion here:

How do refillable capsules for a Nespresso coffee machine work?

You can buy with a discount here:
You can buy for the promotion here:

The original Nespresso capsules consist of a foil-sealed aluminum container. It's really just a container of ground coffee, hermetically sealed.
Nespresso system capsules work as follows: water is fed through the bottom of the container and exits through the lid.
One part of the coffee machine mechanism, for example a Delongi Nespresso with a capsule recess, is located in the piston, with which the user clamps the capsule using an external lever. In this case, the pointed petals pierce the bottom of the container, forming holes through which hot water is supplied under pressure. And the capsule lid is pressed against the supporting element shown on the right with a complex surface relief. At some point, the pressure reaches a level at which the protrusions on the support element pierce the foil of the capsule lid, after which the coffee begins to flow further into the cup.

Now let's look at how the mechanism of the same Delongy coffee machine works in the case of a reusable capsule for the Nespresso system using the example of a plastic capsule.

You can buy with a discount here:
You can buy for the promotion here:

Video (click to play).

When the capsule is clamped using an external lever, the pointed petals enter a special recess of the reusable capsule and do not touch the capsule itself. Pressurized water holes are already made in the reusable capsule body, both on the side of the pointed petals and on the side of the capsule lid.
Please note that the holes on the lid of our reusable capsules are made in a special way in the form of a special stainless steel mesh, which ensures a natural flow of the finished drink and at the same time there is a high-quality filtration from the swollen particles of ground coffee.

You can buy with a discount here:
You can buy for the promotion here:

It must be emphasized that the form factor of the refillable capsules is exactly the same as the original Nespresso capsules. The use of reusable capsules of our online store completely eliminates any malfunctions of the coffee machine.
Buy our refillable capsules and enjoy delicious and cheap coffee from your Nespresso coffee machines!

You can buy with a discount here:
You can buy for the promotion here:

Video repair of capsule coffee machines nespresso channel egorkin dima

Any electrical device can fail over time. Repairing coffee makers from Delonghi, Saeco or Krups is quite easy to do with your own hands. These kitchen appliances are considered one of the easiest to repair and operate.

Before you start repairing the device, you need to determine what exactly broke in it. This will greatly speed up and simplify the repair process. There are two types of coffee machines:

Their main difference is the working pressure. In drip coffee makers (Bosch - Bosch, Zelmer - Zelmer, Vitek - Vitek) hot water drips through the coffee filter, through which it passes into the cup, already being a fragrant drink. In an espresso, a stream of boiling water is poured into the cup, passing through a coffee tablet (compressed ground natural coffee).The advantage of using espresso machines - Electrolux, Binatone, Braun, Philips (Philips) and many others - is that they can work without a filter.

Photo - espresso

Capsule coffee machines for brewing coffee have a special container into which ground natural powder is poured. This allows brewing a drink with or without pressure. The key difference between these functions is that with professional espresso machines, you can make a frothy coffee.

Photo - kapelnaya

Main problems coffee machines and coffee makers of domestic and professional type:

The water stopped flowing. Most likely, one of the pipes supplying water was simply clogged;
The coffee began to give off a strange smell or taste. In this case, it is not always necessary to repair the coffee makers yourself, perhaps you just changed the coffee tablets (they are Dolce Gusto - Dolce Gusto, Nestlé, Jacobs, etc.). Another reason can be a clogged filter or cheap material for the device. If the optimum water temperature for brewing coffee is 95 degrees, then the internal parts are heated to 125 and above. As a result, the cheap plastic can start to melt, imparting its taste to the drink;
Cold coffee. The heating element stopped working;
Incorrect dosage of water (found in capsule coffee makers). A breakdown can occur both in the engine and in the timer circuit;
The espresso machine does not turn on. There may be several reasons: breakdown of the engine, pump, problems with the power cord;
You cannot set the brewing or filling time of the cup. Depending on the type of coffee maker, this may be a breakdown of the time relay, control circuit, engine (or one of its compartments).

It is worth noting that after the intervention, warranty repairs will no longer be provided, so if you are not confident in your abilities, it is better to contact the branded service center.

Photo - schematic diagram

In order to repair any coffee makers (Nespresso - Nespresso, Delongy), you will need to disassemble them first. Step-by-step instructions on how to do this:

There are set screws on the back of the coffee machine. They need to be untwisted and put aside. They can be of several types: hidden, cruciform and cone-shaped (often found in Indesite). They are removed with a screwdriver, pliers or other suitable tools;
If, after removing the screws, the case is not retracted, then it is secured with hidden locks. The latches are located at the bottom of the rear panel. They cannot be opened from the outside, so you have to pry them with a knife or screwdriver;
After removing the case, you can start repair work.

Read also: DIY Volkswagen Polo repair

If the pipe is clogged at Delongey, Bork - Bork, Ariete - Ariete or other coffee makers, then you need to use a long thin rubber hose for repairs. It starts up along the duct and breaks through the blockage. Sometimes for such purposes, special brushes with a flexible leg are used, they allow you to clean the pipe and remove not only coffee, but also mineral deposits.

Photo - construction

Cleaning the filter is a little more difficult. With frequent use, various debris accumulates on it: salt plugs, coffee dust, scale. It should be cleaned only according to the instructions, since otherwise, the integrity of the spare part may be damaged. In most cases, it is allowed to wipe it with a swab dipped in alcohol or other degreaser. Rinse the part thoroughly after rinsing.

Photo - filter

Also, problems can be associated with the filter if water leaks from the coffee maker. This is often found in machines manufactured by Moulinex, Krups, Rowenta, Saego. A special valve is installed near the filter, which, after turning off the timer, turns off the water supply. If after a certain time the drink has not stopped flowing, then the cause is a malfunction of this element. The valve may wear out after frequent use, or it may simply not be able to handle the accumulated amount of coffee.To check and fix the breakdown, you need to disassemble the coffee machine, pour the coffee out of it and inspect the valve. Please note that it cannot be repaired, so the part changes immediately.

Photo - disassembly

If the coffee maker Redmond, Spidem, Tefal, Siemens and others does not turn on, then urgent repair is required:

The first step is to check the power wire. It needs to be examined for an open circuit, and also to additionally check the grounding. It connects to the terminal block, so be careful when diagnosing;
Sometimes, household coffee machines made in China simply lose contacts. It also occurs in professional models (zauber, melitta, trevi). In this case, you need to check all the places where the wires are connected to the control circuit;
Many modern cars (Senseo¸Siemens, Ufesa) sin with a low-quality thermostat. To diagnose it, you need to remove one wire from its end and check the contacts with a tester. With a serviceable element, the circuit must be closed;
Also, the coffee maker may not turn on if the heating element needs repair. It is called in the same way as a thermostat. For many models (Jura Impressa, Miele, Gaggia, Butler) it is made in the form of a disk, so it will be rather difficult to change it, it is easier to try to repair a part or buy a new car;
There are also certain secrets to cleaning the engine. In the care products departments, special brushes are sold that will help clean different parts of the motor without damaging the fragile material. It should be noted that in AEG, Solis or Unit coffee makers, the motor has several compartments, each of which is cleaned separately.

Video: Delonghi Coffee Maker Repair

Very interesting to read:

What is a good and high-quality coffee machine for? Of course, for aromatic hot coffee in the morning. The brewing process of this wonderful drink is almost completely automated and requires minimal human intervention. The filling of the device implies the presence of many mechanical parts, electronic circuits, as well as a miniature hydraulic system. However, everything soon fails and these necessary devices are no exception. In the event of a breakdown of coffee machines, there are only two options: take it to the service or repair the coffee machine yourself.

Water supply interrupted. There is a blockage in the pipeline of the mechanism;
The coffee has acquired an unusual smell or taste. In this case, it is not always necessary to fix something with your own hands. Perhaps you just need to change the coffee tablets, and there is a very wide selection of them: Dolce Gusto - Dolce Gusto, Nestlé, Jacobs, etc. Alternatively, the filter of the coffee machine may be clogged. Cheap plastic can be another factor affecting the taste and smell of coffee. During operation, some parts of the machine heat up to 130 degrees, which can cause the plastic to melt;
Cold coffee. Most likely, your heating element has stopped working;
The espresso machine is not working. Many factors can affect this: the motor is broken, the pump does not work, the power cable is broken;
Water dosage exceeded (most often found in capsule coffee machines). Most likely, the breakdown lies in the engine or in the timer circuit.
The brewing time setting circuit does not work or the dosage into the cup is incorrectly adjusted. Of course, you need to focus on the model of the device and its brand, but a common reason is the improper operation of the engine control circuit, or one of its compartments.

If you are not sure that the repair of the coffee machine is within your power, then it is better to refer it to specialists. If the device is under warranty, then it is not worth disassembling it at all, it will instantly lose the warranty.

To repair the coffee machine, first you need to disassemble it. And how to do it correctly, step by step is described below.

It is necessary to find the back wall of the device, or rather the set screws. Unscrew with a screwdriver, pliers or whatever is at hand and is ideal for such work, set aside. It is worth noting that there may be several options for screws.They can be hidden, cruciform, or with a convex head;
The screws are removed, it is logical that the cover should be easily removed. However, if it cannot be removed, then there are hidden locks in the case. Most often these are ordinary plastic latches and they are located at the bottom of the back cover. From the outside, such a lock can be easily opened with a knife or a small screwdriver;
Finally, access to the "insides" of the machine has been obtained, it's time to start repairing it.

And so let's go in order. There is a blockage in the water supply pipe. In such coffee machines as: Delongee, Bork - Bork, Ariete - Ariete and others, cleaning is done using a long and thin rubber hose. It must be run along the duct and thereby break through the blockage. However, it will be much more effective to use special brushes on a flexible leg.

It is a little more difficult to clean the filter with your own hands. With frequent use of the coffee machine, the filter accumulates: scale, coffee residues, salt plugs, etc. Cleaning must be approached carefully, but the most important thing is to do it according to the instructions, otherwise you can violate the integrity of the part. In the process, it is allowed to use a soft swab sprinkled with alcohol. Rinse the filter thoroughly after cleaning.

If you are unable to solve the problem yourself, contact a Saeco espresso machine repair center.The coffee machines of the firms Mulinex, Krups, Roventa, Saeko have another problem - water leaks. In them, the valve regulating the water supply is located practically in the filter. If the coffee does not stop pouring, most likely a worn valve is to blame, which leads to this phenomenon.The valve cannot be repaired; in this case, only replacement with another new part is available. To understand whether the valve has broken, it is enough to pour coffee out of the machine, disassemble, rinse and inspect well for possible breakdown.

Initially, it is worth checking if everything is in order with the power supply. See if the cable is broken, check the grounding.

It also happens that household coffee machines produced in China simply lose contacts (they go away). Such cases were encountered with more famous brands: zauber, melitta, trevi. It is enough to check all the wire connections with the control circuit.

A common case for Senseo¸Siemens, Ufesa machines, they have low-quality thermostats built into them. To diagnose it, you need to remove one wire from its end and "ring" the contacts with a tester. If all is well, then the chain will be closed.

The heating element may also fail. Diagnostics is carried out in the same way as a thermostat. Replacing it with a new one is difficult, it will be easier to try to repair or buy a new coffee machine.

Very often, on the shelves next to the coffee machine, all the necessary accessories are sold that you will certainly need for the correct operation of the device. And for cleaning technical parts, it is definitely advised to buy special flexible brushes.

The principle of operation and repair of capsule coffee machines is slightly different from drip coffee machines. A small container of coffee powder is attached to the inside of the machine, the piercing mechanism is manually clamped. After use, the capsule is disposed of. Inside such devices, most often there are no temperature sensors, but there is an ordinary pump that runs on a timer. The water flow rate has been calculated in advance. If the water supply is carried out with the wrong dosage, then the time supply circuit may have broken. Image - DIY nespresso capsule coffee maker repair

Repair of coffee makers often does not depend on the brand or model; in general, they differ only in nuances. This can be the shape, as well as the location of parts, size, different types of sensors. The very principle of operation of the coffee machine does not change.

Any professional inspection for breakage always starts with the cord. It makes no difference whether it is a capsule or drip coffee machine repair. Then the power board is checked (if any), it is worth noting that the coffee machine has a lot of filters, diode bridges, and also transistors.All this must be inspected for burnout. This is the only way to recognize the true cause of the equipment malfunctioning.

I will not argue that capsule coffee machines are quite common and have already managed to squeeze their older brethren. This technique allows you to get several of the most popular coffee flavors, is unpretentious, but like everything else, it is prone to breakdown.

The design of the capsule machine is generally identical to large automatic espresso combines... There is a boiler that brings water to the required temperature, a pump that sets the pressure. In more advanced models, there is a control unit where mechanical and electronic components are cleverly combined.

The absence of coffee grinders, coffee powder dispensers and systems for its removal greatly simplifies the design. Plus, in fact, there is no brewing unit. It is replaced by the capsule itself, which requires only a simple holding, piercing and retrieval mechanism. Actually, all of the listed nodes are susceptible to breakdown to one degree or another.

First, the power cord may be defective in the device.... Sometimes it is noticeable visually - there are scratches, sagging and other damage. You should check this moment, as well as the serviceability of the outlet, the correctness of the cord connection to the device itself, whether the machine is turned off.

Another reason for failure is the failure of the electronic unit.... This is a direct way to contact the service. Diagnostics is possible only on special equipment, and only the master can figure out the control microcircuit.

The third point - the short circuit protection has triggered... The machine is de-energized. See if the lid of the infuser is closed. In some models, thermal protection is triggered - here you should wait until the device cools down. Please note that overheating causes blockages in the system with coffee fats and limescale, so I will give you some cleaning recommendations.

Very often the breakdown is affected by lack of regular care. Then the whole filling will literally become overgrown with scale.... The contacts will go away and the circuit will open, as a result - you will not brew coffee. If the instrument does not work, a manual flush can be attempted. In fact, this activity should be carried out on a regular basis, at least 1-2 times a week and without waiting for problems.

Subject to cleaning:

bunker for the installation of capsules;
in machines with auto-removal of capsules - a container for capsules;
in machines with a cappuccinatore - the cappuccinatore tube;
boiler.

During operation, automatic descaling can be started in coffee machines, for which manufacturers have invented special capsules... The operation is recommended to be carried out after every 30 cups of coffee. This is done as follows: the capsule is placed in the compartment, the coffee brewing process starts. A kind of foam forms inside, which removes scale and other contaminants.

In addition to capsules, manufacturers also produce powdered cleaning products..

They work with them like this:

the device turns on;
the spent capsule is discarded, if any;
the drip tray is emptied;
a capacious container is placed under the spout - at least 1 liter;
500 ml of liquid is poured into the water tank, the descaler is poured, following the instructions of the instructions;
to activate the mode, wait until the buttons stop blinking;
the cleaning cycle starts;
when the liquid stops testing, the used solution is poured into the water tank and the system is restarted.

If the pod coffee maker does not brew beverages at the correct temperature, it may be due to the use of poor quality tap water.

A few more reasons:

low mains voltage - with all the desire, the device will not be able to heat the water if the voltage has dropped below 210 V. There is only one output - connection through a stabilizer;
you poured ice water into the machine - a liquid temperature below +10 degrees will provoke a too cold drink. The water should be at room temperature. Plus, one should not forget about its quality (purity, mineralization);
the device is operated in a cold room - the liquid cools down quickly, it is better to rearrange the unit in a warm place;
you use cold dishes - it is better to warm the cup at least under running hot water;
settings failure - you should check this moment too.

In the coffee machine, the capsule is pierced in two places - for the outlet of the finished drink and for the supply of water. The cause of the problem may be a poor fit, which requires replacing the seals to fix it. The breakdown can be more serious, for which the entire press mechanism or a separate piercer is replaced.

If the disk is stuck, there is only one way out - the machine is disconnected from the network and called for service... For long-term maintenance-free operation of the device, the spent capsule should be removed from the compartment in time. This will save you a lot of problems. Remember to clean the capsule receptacle and drip tray so that no water can accumulate there.

Most often, damaged seals are to blame for water leakage. This item is changed to an identical one at the service center. If you put a non-native part, it may not be elastic enough and unstable to high temperatures.

The lack of water flow is most often caused by a breakdown of the piston pump... Do not exclude the clogging of the system with scale. In the first case, contacting the service department will help, in the second - the launch of decalcification.

In some capsule coffee machines, a lack of delivery means that the high pressure pump is not activated.... The water tank must be full to activate. Raise the lever and the liquid will enter the system in a few minutes. The lever should be lowered so that it passes through the dispensing spout. So spill one cup of water. Its absence may indicate the formation of an airlock.

If the drink does not come out of the spout, the first step is to check the filling of the water container - it may be empty. The most common source of malfunction is the ubiquitous scale. Cleaning should be done. After each use, it is worth pouring a cup of water through the system, without using a disc. This will prevent the build-up of coffee grounds in the dispensing system.

The third point - you need to check the container for capsules:

the disc could be stuck - in this case, the water that was used to brew the coffee could have entered the container. It should be removed;
the disc may not be inserted correctly.

This indicates improper use of the device. Typically, users lift the capsule compartment lid handle too early to cause this defect. It should only be raised after the complete brewing cycle, after a few seconds.

Blinking indicators can indicate that the device has overheated. You just need to leave it alone until it cools down or enters standby mode. More serious problems may relate to the electrical filling of the machine. To check this, you should disconnect the device from the network, turn it on. If the indication continues, it remains to take the device to an authorized service.

Capsule machines are not less likely than others to breakdown, but 90% of problems can be avoided with proper maintenance of equipment and start up in accordance with the manufacturer's instructions. I advise you to refuse to repair serious faults yourself - this will cause even more problems, although it is quite permissible to eliminate minor flaws on your own.

To enjoy hot and aromatic coffee every morning, you will definitely need a good quality coffee machine. The process of brewing coffee using capsule coffee machines is practically fully automated and does not require a lot of steps from you. As with any technology, a capsule coffee machine may require replacement or repair of mechanical parts or electronic circuits. The best option to restore the working capacity of such coffee machines as Nespresso, Delongi, Krups is to do it yourself.

Despite the fact that capsule coffee machines Nespresso, Delongy, Krups, Dolce have a high degree of wear, nevertheless, they may also need to be repaired. The main causes of malfunctions are:

Poor water quality.
Voltage drops.
Scale appearing.

Nespresso Essenza coffee machine

Malfunctions that occur when using capsule coffee machines Nespresso, Delongi, Krups can be roughly divided into two main types:

Malfunctions that can be repaired by hand without the use of special tools and devices.
Malfunctions that need to be repaired with the assistance of a specialist.

Important: do not try to carry out repairs yourself related to the replacement of wires, supply systems or water heating. This can harm your health and increase the cost of restoring your coffee machine.

If, during the preparation of coffee, the pressure of the jet drops out or there is a hissing sound from the horn, this may be due to the formation of limescale. This problem is not critical and can be fixed by yourself. To eliminate, you need a thin wire or needle. Clean the diffuser opening (the part from which water enters the capsule). To prevent this problem from recurring, use distilled water.

This flow is possible in the place where the connecting seal is located. The most common reason for clogging the seal in capsule coffee machines Nespresso, Delongy, Krups, Dolce is densely

Pieces of coffee.
Body fat.
Foreign objects.

Remove the seal to correct the problem. It can be removed easily, without any pressure, it is enough to gently push the seal back with a screwdriver or not a sharp knife. Depending on the brand of capsule coffee machine (Nespresso, Delongy, Krups, Dolce thickly), the seal can be protected by a mesh, it must also be unscrewed. Use special detergents to remove various particles and foreign deposits. If the mesh or the seal itself is damaged, then they cannot be repaired and must be replaced with new ones.

Nespresso Inissia coffee machine

This problem can occur if the mesh or filter of the coffee machine is clogged with large pieces of coffee beans, limescale or fat deposits. To eliminate all blockages, it is necessary to thoroughly rinse all parts using a hard sponge.

Important: when clearing blockages and various deposits, do not scratch metal parts, this may further lead to more frequent blockages or malfunction of the device.

The coffee machine does not brew coffee, there is an abnormal noise

First, check the presence of water in the tank and the fact of its heating. If the water is heated and supplied without problems, then use the cappuccino maker and run the water through it. If the problem was the formation of an air lock, then this will help you fix it.

Another reason for a thin and weak jet of water can be a blockage in the tubing system. Depending on the model and manufacturer of the coffee machine (Nespresso, Delongi, Krups), the rinsing sequence may differ. You must carefully read the sequence of actions in the instructions.

Not all models of capsule coffee machines have the function of reminding you to clean the machine. However, remember that any technique requires maintenance and do not forget to take preventive measures to avoid further repairs.

Most of the breakdowns in the operation of capsule coffee machines Nespresso, Delongy, Krups, Dolce can be easily eliminated by yourself. To do this, you need to clearly define the problem that has arisen, and all actions must be rational and careful.

Looking for a great cup of flavorful full-bodied espresso or lungo? Nespresso capsules couldn't be easier. Put a capsule in the machine, press the button - minute - and great coffee is ready.But ... If you want your coffee to be really tasty, and the blend you have chosen reveals all its flavor characteristics, you should follow a few recommendations.

Tip 1. Clean your Nespresso coffee machine regularly and thoroughly.

This is one of the simplest and most important rules for getting good coffee from a capsule.

After some time of use, the coffee machine fills up with old coffee vapors, which can affect the taste of the drink. The coffee will be bitter and tasteless. After each use of the capsule, a layer of coffee oil remains in the coffee machine, which accumulates and subsequently it will be difficult to get rid of the oil layer.

Accumulated plaque can also cause the water to not pass through the capsule properly. Under pressure, water flows along the walls and partially flows out of the capsule puncture zone. This significantly degrades the quality of the coffee and can also cause mold, yeast and harmful bacteria to appear inside the nozzle, on the washer plate or in the brewing boiler.

Therefore, cleaning your coffee machine is one of the best ways to improve the taste of your coffee. If you have a Nespresso coffee machine (Essenza, Inissia, Pixie, etc.) that does not have an automatic emptying of the used capsule, remove the capsule immediately after use.

You can also advise the regular use of cleaning capsules in order to properly and properly clean the internal components of the Nespresso from the accumulated residues of the coffee preparation process.

However, regular cleaning is not the only thing that helps to ensure that your coffee tastes great and keeps your Nespresso machine up and running.

Tip 2. Warm up the coffee machine before use.

This is a simple yet effective way to improve the taste of your coffee. Before inserting a new capsule into the coffee machine, we advise you to pass a little water through it. (make sure the old capsule is removed from the machine). This simple procedure helps to rinse out old coffee residues and warm up the machine.

Warming up the components of the coffee machine allows the contact elements to better pierce the capsule and regulate the portion of your coffee, and this, in turn, affects the balance of the taste of the drink.

Tip 3. Descale the coffee machine regularly.

Descaling is an important part of taking care of your espresso machine.

Any water contains some amount of calcium and magnesium, which is an indicator of water hardness.

Water with a high content of these elements is hard and leads to a rapid build-up of limescale inside the coffee machine.

Water low in calcium and magnesium is softer, but also more susceptible to oxygen and temperature, which leads to oxidation and corrosion.

All of this can spoil the taste of your coffee, so we recommend that you take at least 20 minutes a month to descale the coffee machine. This will increase the life and performance of your coffee machine and ensure you have a consistently balanced Nespresso taste.

Most Nespresso coffee machine models (from the main brands Krups and DeLonghi) have a built-in descaling mode, so we advise you to contact technical support to find out how it is activated on your coffee machine model.

As a guide, we advise you to take the following actions:

Purchase a certified descaling liquid Nespresso Descaling, turn on the coffee machine

- Remove water from the machine and the pallet

- Mix water and descaling liquid and pour the mixture into the coffee machine

- Switch on the descaling mode on your coffee machine (use the instruction manual for your particular coffee machine model or contact technical support)

- Empty the water tank

- Run fresh water through the coffee machine

- Empty drip tray

Tip 4. Use filtered water.

After purchasing coffee capsules of your favorite blend, it is worth providing yourself with bottled water so that all the ingredients of the future coffee are of the highest quality.

If you do not want to constantly purchase water bottles, then we advise you to filter the water before pouring it into the tank of your coffee machine.

This will help you prevent limescale build-up and enjoy great taste for longer.

Tip 5. Calibrate the machine for a specific amount of Espresso.

All Nespresso machines are pre-programmed to dispense a certain amount of water, depending on your preferred volume of choice: ristretto (25 ml), espresso (40 ml) or lungo (110 ml).

If you want to re-calibrate your coffee machine to your liking, then you should follow these steps:

- Place your favorite mug or glass under the spout of the coffee machine

- Load the capsule of the selected coffee into the coffee machine

- Press and hold the brew button (ristretto, espresso, or lungo)

- Release the brew button

Now, when you press the brewing button, the coffee machine will pour out the amount of coffee you have selected.

You may have to experiment with the volume of coffee until you find the optimal combination. During the brewing process, you can judge the strength and saturation stages of the drink by the color of the coffee stream.

Espresso goes through 3 different shades while pouring into a cup:

Red brown Is the Ristretto that gives the coffee sweetness

Caramel Is the balanced taste that is the secret of Espresso

Light - bitter water, washing away coffee residues from the capsule

Watch the color change and you will know when to release the brew button. At the end of this procedure, your coffee machine will remember the settings and will always pour out as much coffee as you like.

We sincerely hope that these tips and tricks will help you enjoy your truly delicious Nespresso coffee.

The GsmMoscow service center has a huge warehouse of original components and thanks to this, the average repair of delonghi Nespresso capsule coffee machines takes only 50 minutes. The main reasons for breakdowns are the cleaning was not done on time or not very high-quality water was used. It is these reasons that lead to the failure of their equipment. Before eliminating any breakdown, diagnostics are done first, which will be free for you and take about 20 minutes, it is necessary to determine the exact breakdown.

All current prices for the elimination of breakdowns can be found in this table:

When a breakdown is detected, most customers want to know what is defective and what part needs to be changed, it is precisely on all these questions that our manager will answer you, and you can also write to us.

The device has broken down and there is no time for a call, then this section will help you, which describes all the breakdowns and how to fix them, you just need to click on the one you need. We also constantly release more and more new video instructions so that you can repair your delonghi Nespresso capsule coffee machine yourself.

admin 03/06/2016 For home, for family Comments Off on DIY DeLonghi Coffee Machine Repair Disabled 3,423 Views

Almost everyone who drinks coffee made in a coffee machine in his home in the morning is inevitably faced with the fact that after a while, the trickle of coffee begins to degrade, the coffee machine begins to rumble, and by the end of the day it stops working altogether - i.e. the pump pumps water, the lights are on as needed, the boiling water drips a little, but not foam, not a full cup ... ..
If you have a DeLonghi espresso machine with a carob coffee machine, do not rush to take it in for repair, because modern service is built on the principle of doing as little as possible and getting as much as possible. If you have simple tools in your house and a minimum skill of working with your hands, then, following the instructions below, 90% will do without the help of a “master”.

For the largest repairs, you will need tools (see Fig. 1.):

Fig 1.
• Screwdriver (1) with a counterpart for installing a curly nozzle (5);
• A set of shaped nozzles (5) - (for example, "A set of bits of type CR-V bits set Model 1041-01-SS4");
• Screwdriver (2) of the "cross" type;
• Traditional medium-sized screwdriver with a flat blade (3);
• Traditional small screwdriver with a flat blade (4) and a handle no more than 5 cm.

Next, we will follow the increasing rate of failures:

g) Using the Screwdriver (4) from the threaded hole of the dispenser, carefully remove and clean the spring valve;

h) Turn the coffee machine over and use two table knives (1) and (2) to remove the plastic handle (3), which regulates the flow of steam when preparing cappuccino coffee (see Fig. 4).
ATTENTION: To avoid damage to the machine parts, lift the plastic handle with gentle movements without skewing, moving it up along the slots on the steam regulator shaft.

Fig 4.
i) Using a screwdriver (1) with a shaped nozzle (5), unscrew the two screws and remove the upper cover (2) of the coffee machine. (see Fig. 5);

Fig. 5
As a result, we will gain access to the internal elements of the coffee machine (see Fig. 5).

Video (click to play).

ADDITIONAL MATERIALS
Video about the device of the coffee machine