In detail: do-it-yourself compressor nebulizer repair from a real master for the site my.housecope.com.
This copy is practically from the first release of these products. Were on free sale, despite the general deficit. For some time people simply did not understand what it was and why. Cosmetic device "Romashka" - that is how it was positioned at that time, moreover, to a greater extent it is still a medical device, but it was impossible to sell such devices at that time - there was a hospital for treatment. The product was new in every way. It cost 27 rubles. In general, not cheap. However, then everyone had a lot of money, they were kept in savings banks until better times, because there were no goods in the current stores. And the fact that the devices disappeared from the shelves as suddenly as they appeared was, in general, expected. It was 1987.
An elegant, compact piece with a nice design. However, the device has not lost its visual appeal to this day. The supply voltage is 220 volts, the declared power is 120 watts. Light weight, quickly put into position and easy to maintain. The base body is made of impact-resistant dark gray plastic, the lower part of which smoothly goes into the integrated legs, framed by soft rubber at the bottom, which allows using the device on any, even the most delicate surface - there will be no scratches. On the front of the case there is an elegant red insert with the name and image of the all-Union quality mark. Below it is a noticeable and convenient switch key, which houses an indication lamp for displaying the switched on state of the device.
On the opposite side of the case, a 1.5-meter power cord with a flat plastic plug comes out through the existing hole.
 |
Video (click to play). |
Inside the body, in a fairly large recess, there is, perhaps, the main working part of the device hermetically mounted - a bath made of stainless half-millimeter steel with side dimensions of 75x75 mm and a depth of 25 mm. A transparent "mask" made of organic glass is installed in the recess of the upper part of the body to produce the required thermal effect both on the face of the person using the device and on his respiratory organs.
Due to the well-thought-out design of the device, in the assembled, so to speak "transport" position, its external dimensions are halved, so that it can easily fit into any compartment of the furniture wall.
The bottom is made of 2 mm PCB, behind it is a compartment with electrical filling.
The bottom is fastened with such original clamps.
Inside the compartment, on a special frame attached to the working bath, an electric heater, a thermal switch and an electric wire attachment block are mounted. A neon indication lamp with a limiting resistor is clearly visible. The wires leading directly to the heating element are covered with ceramic rings.
The heating element is type-setting, consists of a nichrome spiral lined with mica plates, the outer plates are steel. In the event of a coil burnout, the heating element is repairable. One has only to unscrew the two screws. To put it simply - its service life is "eternal".
The scheme of operation of the device is as follows: the electric current passes through the switched on switch, through the contacting contacts of the thermal switch and at the same time “lights up” a neon lamp, signaling this, and activates the heating element.In the case of complete boiling off of the liquid in the working bath and the resulting overheating, the contacts of the thermal switch open and overheating, and, accordingly, the burnout of the spiral is not allowed.
The use of inhalers is currently one of the main methods of therapy for many respiratory diseases. That is why these devices, due to long-term operation, often fail. This requires the replacement of certain parts of such devices. Inhaler repair should be carried out using quality spare parts and an understanding of the entire internal structure. This is due to the fact that only in this case it is possible to achieve that the nebulizer functions correctly, providing the proper therapeutic effect during treatment.
Repair of inhalers is required in certain cases, among which the most common are:
- The proper amount of the drug does not enter the human body.
- Failure of the toggle switch or some buttons. This applies to both their sinking and lack of response to manipulation with them.
- The switched on device refuses to supply a finely dispersed drug substance to the human body.
- The device does not turn on and does not function in any way. This problem is the most serious, as it indicates a significant and serious breakdown.
Repair of the inhaler is also required in cases where certain parts and elements of it fail. Among them, first of all, it is worth highlighting filters, compressors, cameras, masks, bumpers, etc. If you correctly identify the cause of the breakdown, as well as select the appropriate components, you can resume the functionality of the nebulizer without any problems.
If there is a guarantee, as well as the possibility of contacting a specialized service center, it is not recommended to carry out repairs with an inhaler with your own hands. Self-repair can lead to:
- to the complete loss of the guarantee, which was given by the manufacturer for a certain period of correct operation of the device.
- serious damage to the device, which will require serious financial resources in the future.
- complete loss of device functionality and the possibility of its renewal in one way or another.
Among the main problems that arise with nebulizers, masters first of all distinguish the following:
- interrupting the cord through which the device is connected to the network;
- clogging of filters with particles of the drugs used;
- contamination of certain elements due to the use of insufficiently dissolved drugs;
- short circuit in the power supply circuit of the device;
- compressor wear due to excessive use of the device;
- malfunction of the processor or other electronics.
The list of the above problems is not definitive.
The advantages of self-repairing an inhalation apparatus with your own hands are the cheapness of this process. This can be justified only in cases where the device needs to replace certain component parts. Moreover, the less a person disassembles the device, the safer such manipulation will be for the device.
You can replace with your own hands such elements as a spray bottle, mask, air tube, nasal and mouthpiece, filters for cleaning the solution, a bump stop, a camera and some others. All this does not require significant intervention in the design of the apparatus.
If professional cleaning or analysis of the processor's electrical circuit is required, it is best to entrust this work to professionals. It is impossible to independently solve such problems without appropriate knowledge.
Thus, we can conclude that self-repair is possible only when the problem of breakdown is obvious and there is no need to carry out significant manipulations with the device.
Repair of inhalers under the warranty period can be made within 1 year after purchasing these devices. This period directly depends on the manufacturer - some companies for certain models may provide a shorter or longer warranty for their operation.
Warranty repair of the nebulizer can be obtained only at a specialized service center recommended by the manufacturer of the device. All conditions concerning this must be indicated in the instructions for use of the device. First of all, you should pay attention to cases that cannot be guaranteed. For example, deliberate or unintentional damage to the device, which was not the fault of the manufacturer, cannot be paid for by him.
Repair of inhalers under warranty can only be performed if the corresponding warranty card is filled in correctly. That is why, when buying, it is worth paying attention to, as well as the presence of instructions, the complete completeness and operability of the device.
Is there such? Who had their inhalers broken, and then they were subject to repair?
I took it from a colleague to use it, breathed twice, on the 3rd it began to buzz strongly and the steam stopped coming ... Moreover, I didn’t drop it, didn’t knock it, it lay quietly in the same place. It's a shame (((4 pieces are a pity.
Mobile app"Happy Mama" 
4,7 It is much more convenient to communicate in the application!
contact the service center. I would also ask a friend if there is a guarantee for it and it will be repaired under the guarantee.
8 years ago I bought it never broke. And you turned it on correctly. I didn't have steam when I got a pimp inside (I don’t know what it’s called) I forgot to insert it, and it was buzzing
An inhaler is a device that is very effective for treating colds, especially for young children. Making an inhaler with your own hands at home is not difficult. The easiest option is to use a thermos or jar. But if necessary, not everyone can assemble a compressor or ultrasonic inhaler on their own, since such designs require skills in working with electronics.
An inhaler is a device that is used to inject drugs into the body in an aerosol manner. It is used to treat diseases of the respiratory tract.
A nebulizer and an inhaler are similar. But the first device splits liquid into small particles, unlike a steam inhaler.
The purpose of the inhaler differs in depending on its properties.
Some devices affect only certain types of diseases, while others have restrictions on the use of certain drugs:
Inhaler type
Principle of operation
The principle of operation is to heat the drug to 45 degrees, after which the liquid turns into steam
Treatment and prevention of upper respiratory tract diseases: influenza, rhinitis
The device is based on a compressor that drives air through a small hole, thus increasing the pressure and the substance is split into an aerosol
Treatment of diseases of the upper, middle, and lower respiratory tract: ARVI, bronchitis, pneumonia, tuberculosis, asthma
The medicine breaks down into tiny particles using ultrasonic emitters. In terms of efficiency, this device is several times higher than steam and compression inhalers.
It is used to treat colds and infectious diseases. Has a restriction on the use of drugs that decompose under the influence of ultrasound
The medicine is broken down into tiny particles using a vibrating membrane
High-tech devices that are in no way inferior to compressor ones and are used to treat the same diseases. Main disadvantage: high price
The first involves making a homemade device from a plastic bottle. It will require: a bottle, a thermos with hot water, scissors, 2 lids.
First, you need to cut the bottle by 1/3, then make a markup and remove excess, forming a mask for inhalation, it should completely cover the nose and throat (for the manufacture of a children's inhaler, the mask needs to be cut out less). 2 valves are required. One will be responsible for exhaling, the other for inhaling. The first is done first:
- It is necessary to get the gasket that is inside the cover.
- It is cut along the inner ring and a small tail is left (approx. 3 mm).
- A small hole is made in the lid itself, with a diameter of 3 mm, and in the other - with a diameter of 5 mm.
- The cut-out gasket must be carefully placed on the bottom of the cover and tightened with a threaded joint.
- This valve allows you to inhale the contents of the inhaler.
For the second valve, you need to make a small hole in the neck. A piece of electrical tape is cut off and folded in half, so that a small piece of the sticky part is freely accessible. Next, tape is glued in such a way that the sticky part covers the hole in the neck.
The solution is poured into the thermos and the previously made mask is inserted. One valve is attached to the thermos, and through the second it is necessary to exhale.
Service centers and workshops for the repair of inhalers
Moscow, st. Vilisa Latsisa, 5, building 1 view on the map
Official service center. ...
Moscow, Vorotnikovsky per. d. 7, building 3 look on the map
Warranty and post-warranty service of OMRON and CS Medica medical equipment ...
Optional: replacing consumables
Microlife, B. Well, Bionime, Philips Respironics warranty repairs
Moscow, Shosse Entuziastov, house 31, building 38, Trade Center "31", pavilion A-11 view on the map
Round the clock: 8 (499) 341-45-00
Our workshop is open every day from 11:00 to 14:00 and produces non-warranty, i.e. paid repair of household appliances, phones, tablets, laptops, cameras, power tools and other equipment. ...
Moscow, st. Raduzhnaya, 15, building 1 look on the map
Moscow, st. 5 Sokolinaya Gora, 22 look on the map
Hartmann warranty repair
Moscow, st. Novocheremushkinskaya, 34, bldg. 1 view on the map
Warranty Repair NISSEI, Little Doctor
Repair of medical equipment. ...
- - delivery of the inhaler for repair by the service center
- - on-site repair of the inhaler at home or in the office
- - service of replacement of consumables
- - services for the installation and configuration of equipment
- - sale of spare parts for the repair of the inhaler.
- delivery of the inhaler for repair by the service center
- on-site repair of the inhaler at home or in the office
- service of replacement of consumables
- services for the installation and configuration of equipment
- sale of spare parts for the repair of the inhaler.To install or configure the purchased equipment, you can use the services of specialists from authorized organizations (authorized service center), who will carry out all the necessary work for the further operation of the inhaler. The addresses of all service centers on the map of Moscow are given at the top of the page. If there is no service center at the indicated address or is located at a different address, please let us know.
A nebulizer is a special medical device that converts medicinal solutions into steam. With the help of it, inhalation is carried out, since it is easier for the steam to enter the respiratory tract and lungs. Nebulizers are usually recommended for young children, people with asthma, or people with respiratory damage. The nebulizer must always be kept clean. This is very important, because if it is dirty, then all the germs on it can get into your lungs and cause infection. Order our general hypoallergenic cleaning of your apartment.
Follow these steps after each use of the inhaler.
- The first step is to thoroughly wash your hands with soap or an alcohol-based solution. Since the quick cleaning method does not involve soaping, we need to kill all bacteria on our hands so as not to transfer them to the inhaler.
- Disassemble the nebulizer kit if possible.Most models are divided into 3 parts - a mask or mouthpiece, a tube connecting the mask and the main unit, and a pressurized air supply unit. Detach all parts from each other. You do not need to clean the main unit, you only need to clean the mask and tube. Although the mask will be enough.
- In general, nebulizers are divided into 2 types - these are inhalers that supply steam under pressure and with the help of ultrasound. They are very different. The first type supplies air under pressure and thereby converts the medicine into steam, while the second type uses sound waves to convert the medicine into steam. But both the first and the second species have the same design of the mask and tube.
- There are also portable nebulizers. They have fewer parts to remove. The most important thing is to remove the mask or mouthpiece - this is quite enough.
- Wash your mask or mouthpiece under warm water. Be sure to flush all T-joints. Run the part under water and hold it under it from half a minute to a minute. Make sure all parts are washed.
- Never wash the blower itself in this way. It can be wiped on the outside, but never wet.
- After you've washed the mouthpiece (or mask), shake off any excess moisture from it and place it on a clean towel. Let the water dry naturally. This can take about 20 minutes to an hour.
- The best place to store clean masks and mouthpieces is in ziplock bags.
- After all the parts are dry, reassemble the nebulizer in its original state.
- For some models of nebulizers, the mouthpiece must be disinfected with soap every day. To find out for sure, you need to consult a seller before buying. Disinfection should be done with soap.
The following steps must be performed every 3-7 days.
- In order for the nebulazier to serve you for a long time, it is periodically necessary to deep clean it. This is necessary in order to kill all harmful bacteria and microorganisms.
- Most manufacturers recommend deep cleaning once or twice a week. If you are not sure how often you need to carry it out, then read the instructions. There such information is available.
- Different manufacturers recommend different products for deep cleaning of the device. Some inhalers already come with a special cleaning solution, other manufacturers advise buying such solutions in pharmacies. But you can also make a disinfectant solution at home.
- To make your own solution, you must mix one part white vinegar and three parts water. For example, you can mix 0.5 cups of white vinegar with 1.5 cups of water.
- Remove all parts of the nebulizer. Disconnect all T-pieces and place these pieces in a bowl or bowl. Cover them with the solution and let sit in it for 20 minutes.
- Again, do not soak the main unit.
- After soaking is finished, be sure to rinse all parts and finish the process in the same way as in the quick method.
For high-quality disinfection of premises, order cleaning services from our cleaning company.
Before you start cleaning, be sure to read the instructions for your inhaler.
The air filter in the main unit must be replaced periodically. Find out how long it will take to do this.
If the parts of the inhaler cannot be disassembled, do not use force. You will only break your nebulizer.
Do not use too hot water. In addition to causing burns, hot water can deform parts of your inhaler.
In practice, the most common reason for a compressor unit to malfunction is the loss of a diffuser (the small blue cap inside the chamber). This is an important detail due to which fine aerosol particles are formed.Look into the distribution chamber, if there is no diffuser, contact the service center for help, since it is not always possible to find a part in ordinary medical equipment stores.
The next reason why the Omron inhaler does not spray medicine is damage to the air outlet tube. To check if the hose is damaged, connect it to the compressor with one end, and hold the other in your hands and turn on the device. If the compressor is running and there is no air pressure, then there is a puncture in the air outlet tube. You can buy an air vent tube in specialized medical equipment stores, or order it at the Omron service center.
Minor malfunctions and their elimination
Numerous users on the forums mainly note the stable operation of Japanese inhalers. But sometimes on the Internet you can come across a question - why does not steam come from the Ompron nebulizer.
The table below summarizes the most likely causes of no or insufficient aerosol spraying:
Girls, mothers! Tell me what to do! It's very bad without an inhaler.
I put everything together correctly. The inhaler is 1 year old, compressor. We use it very often. Once the steam did not come out - a small hole in the glass got clogged - they boiled it and everything became fine, but now it doesn’t help ?! Thanks a lot for the answers.Save with LetyShops cashback!
Register now and get Premium account.
GIRLS FOR EVERYONE WHO HAS THE SAME PROBLEM.
My husband went to the server center. I bought a new cup with a splitter. Paid 120 UAH (the inhaler was bought 1 year ago for 640 UAH AND 3 YEAR WARRANTY). They said it was impossible to clean it with a hollow. We poked the hole a little and that was enough for the pressure to drop. If there is a guarantee for the inhaler and the steam has stopped going better, do not boil, do not clean, but immediately go to the server center. And save money and nerves.
Compressor inhaler Omron NE-C20 we bought 7 months ago. Then our child had a terrible cough, and our doctor advised us to buy this contraption. According to her, the inhaler will allow us to solve the problem with our tracheitis much faster and more reliably. No sooner said than done. I went to the nearest pharmacy and for three thousand rubles with a penny bought this wonderful nebulizer - this is also the name of these devices. I didn’t even know a word like that before. Unfortunately, the first experience of using the inhaler in our case can be considered unsuccessful. Our three-year-old flatly refused to wear a mask. Neither persuasion nor promises of gifts helped, the device was removed “until better times”. Now autumn has come - the time for colds. Now the baby has become older and we managed to convince him to sit in a mask “like a baby elephant”. So now I am ready to share my observations and conclusions with those who are looking for a way to quickly defeat a cold.
In general, I heard about inhalers as a child. I remember that our teacher of the Russian language and literature, who periodically lost her voice, trying to make us "at least some kind of people", went to the local clinic, where her strained throat was restored with inhalations. By the way, I have a very curious episode connected with this teacher, which I described in an article about “living sand”. If interested, read at your leisure.
Today you can do without the services of a polyclinic. Inhalers are available at any major pharmacy.
Steam appliances, which are practically not on sale anymore, stand a little apart. There is a lot of trouble with them, although in some cases they also have a right to exist. By the way, as a child, did you breathe over potatoes? If so, you have used the simplest steam inhaler 🙂
Basically, there are two types of devices on sale now: compression and ultrasonic. Each type has its advantages and minutes.
Ultrasonic inhalers work almost silently. This is important enough when using them to treat children, or if you need to carry out the procedure in a room where other children are sleeping.Ultrasound inhalers are more compact, so you can take them with you on trips. The disadvantage of such devices is the constant purchase of consumables, such as cups for medicines and gel, if required for the procedure. Consumables are inexpensive, but you need to constantly bribe them, otherwise they will run out at the most inopportune moment.
Another important point: unfortunately, not all drugs that can be sprayed with a compressor nebulizer are suitable for ultrasound. For example, you cannot use an ultrasonic machine to spray antibiotics and dioxins.
By the way, the principle of splitting liquid water into microdroplets using ultrasound is used in another device. Have you seen decorative fountains with a large bowl filled with mist? This is roughly from the same opera:
Compressor inhalers more versatile. They can be used to spray almost all liquid medicines except those containing oils or suspended particles. However, these liquids cannot be sprayed with an ultrasonic device.
Compressor nebulizers are generally less portable, heavier and more noisy. But they do not need to buy any consumables except for the drugs themselves and they have a longer service life.
Nebulizers are also subdivided into portable, which can be carried with you and which can be powered by a battery, and stationary, which are used in clinics, but you can buy such a device for home.
There are special children's compressor inhalers in the form of little trains, ladybugs or penguins.
In a word, devices are different, but they have the same task - to turn a liquid medicine into a light mist with a certain drop size and deliver it to the patient's nose or mouth. The therapeutic effect is achieved when microdroplets of the drug settle on the surfaces of the nasopharynx and trachea.
Special attention should be paid to the size of a microdroplet of liquid medicine that a particular model can provide. The optimal droplet size is considered to be 2-5 microns. Smaller particles "fly" directly into the alveoli of the lungs, where they are quickly absorbed or exhaled back. Larger droplets do not reach their destination due to their gravity.
In order not to guess on the coffee grounds and choose the inhaler correctly it is worth consulting with your doctor.
In our case, an apparatus with a droplet size of exactly 2 to 5 microns was recommended. As a result of a trip to the nearest pharmacy, a compressor inhaler Ormon NE-C20 was purchased. Further, a review will be presented specifically about this device.
In principle, there is nothing unusual there. The box itself is pleasant in appearance, it has many different designations, pictures and words of praise for the device. I especially like the bright red badge, which can be confusing for non-English speakers. The badge reads: Technology And Quality JAPAN. Moreover, the last word is written especially in large size. Gullible buyers are glad that they have “grabbed” a real Japanese device. In fact, this badge says: Japanese technology and quality. That is, the device was developed in Japan (maybe), but where do you think it was made? That's right - in China 🙂
Inside the box is the device itself with an AC adapter, two masks - for children and adults, a reservoir for medicines, which is assembled from several separate parts, a flexible tube connecting the device to the reservoir, a mouthpiece, a nosepiece, a set of spare air filters.
Importantly, the set includes a cloth bag that will allow you to store nebulizer parts not just in bulk in the bottom drawer of a bookcase or chest of drawers, but in perfect order, when all the parts are collected together and nothing is lying around, and, therefore, will not be lost.
Let's take a look at all the details of the nebulizer:
The rules for assembling, operating and caring for the device are indicated in the instructions, reprinting which here is a thankless task 🙂
To be very brief and highlight the most important thing, then:
Of particular note is the fact that the nebulizer kit must be replaced once a year. True, the instructions do not say what intensity of use of the device leads to such a need. After all, it's one thing to use an inhaler almost every day, and another - just a couple of weeks a year. Alas, the instruction is silent about this, so you will have to be guided by a purely intuitive method of determining the moment when you need to buy a new camera.
In addition, the air filter should be changed from time to time, which is inserted into the body of the device itself and prevents dust and other small particles from entering the nebulizer chamber.
It is very easy to get and check the filter. It is necessary to pull the blue plug on the case. It is not attached to the thread, but simply inserted:
The instructions say that you need to change the filter after 60 days of operation. Probably, this is precisely the active operation, so most likely it is worth pulling out the filter from time to time and just inspecting it. If it has changed color or if there are clear signs of contamination, replace it. Fortunately, there are five spare filters in the kit, and I think you can buy additional filters at pharmacies.
Before answering this question, I would like to say that our family members do not get sick so often. Colds or viruses visit us once or twice a year. In principle, even in the absence of a nebulizer, we coped well with them and this could have continued if our attending pediatrician had not recommended us buy inhaler... According to the doctor, with its help, you can quickly deliver the medicine exactly where you need it, and not swallow antibiotics, spoiling the microflora of the stomach and causing other harm to the body.
In addition, certain types of medicines can soothe coughs, affect the nasal mucosa, etc.
All these arguments seemed convincing to us, and now I am stomping into the nearest pharmacy, clutching my hard earned ones in my fist :). I don’t know about you, but for some families, unforeseen expenses of 3,000 rubles (and sometimes more) can be very burdensome. Indeed, in every family there are situations when money seems to be there, but there are times when they are running out of money. Therefore, if you want to buy a nebulizer, it is better to do so in advance, finding a place where it is sold at the most pleasant price, and at the moment when there is some free money. It's great to have an emergency reserve of them, but that's a topic for a separate article.
Keep in mind that according to the law of dirty tricks, the device will have to be bought exactly at a “disastrous” moment from a financial point of view, and urgently - in the nearest pharmacy at the most unfavorable price. In this case, the proverb “Prepare your sleigh in the summer, and the inhaler is healthy and wealthy” is very appropriate.
It is very important that the purchased device can really be used, and not have to be put on the shelf, as happened in our family. The kid, after much persuasion, agreed to put on a mask on his face, but when the inhaler hummed and drove the air with vapors of drugs, the child was frightened and raised a terrible cry. Neither persuasion nor promises of gifts helped. Therefore, with great regret, we had to abandon the use of the inhaler for the treatment of the then tracheitis.
However, now that the baby has grown up, and only seven months have passed, he takes inhalation procedures quite normally. It almost became a game for him. It is especially good that at this time you can watch cartoons or your own shooting with him in the lead role.
In response to the question whether inhalation has a positive effect, I can answer from my own experience, since right now we are sick with the whole family and I also use the device.
The doctor prescribed us 8 procedures a day with the alternation of the following fluids: saline, borjomi without gas (do not drink, namely breathe :), aminocaproic acid and miramistin. Naturally, the doses of each medicine are indicated for our particular case, so I do not indicate them here. If you want to buy and use your own compression inhaler, you should consult your doctor for maximum effect.
It has been two days since the start of the application. The term is short, but it seems to me that there is definitely a positive effect. Of course, it is difficult to write about him unambiguously. After all, it is not known what would have happened if I had been treated with the usual means under the same conditions.
But the fact that I do not have nasal congestion and not such a dry barking cough as usual can be said for sure. The child also tolerates the disease more easily, does not scandal, does not be capricious, more or less sleep at night more or less tolerably. I am afraid to make an unambiguous statement, but earlier, before using the inhaler, he was ill much more severely - with fever, hoarseness, loss of voice and a constant flow from the nose.
Now everything is going much easier. Perhaps this is really the merit of the device.
On my own I can say one thing. This time I decided to take advantage of my illness, no matter how paradoxical it sounds. No other medicine, only inhalation. The doctor, in principle, did not object to such an experiment, only ordered to monitor the state of health and if anything.
For the purity of the experiment, one should not yet go outside, but this does not work. We all "fell ill" at the same time, and someone has to go to the store for "goodies".
Now comes the third day. I think that in a couple of days I will be able to continue this article and draw more global conclusions about the role of a compression inhaler in the treatment of colds.
So today I carried out the first test tests. The compair ne-c28-e nebulizer is connected to it through an internal silicone hose (diameter 3.5 mm) the jas professional 1124 airbrush is connected. The paint container is filled with water. I have no idea how to do it. I don’t know the pressure gauge. I didn’t connect the pressure gauge.
Result: when everything is sealed, then everything is fine and the airbrush blows very vigorously but just blows with air without spraying water. Then I unscrewed the air control adjusting screw and everything fell into place, the water is sprayed, but the first 4 seconds then, as I understood, the pressure and flow rate drops, respectively just does not blow out water from the container. It blows out exactly without pulsation.
Suggested solution:
1.scheme: compressor (nebulizer) -long rubber hose1.5m. - 2 car fire extinguishers, 2 or 3 liters each - long rubber hose
1.2m.-pressure gauge-moisture-oil separator-silicone hose-airbrush + I want to cram a camera from a motorcycle or a car into this circuit, which will serve as a battery
air will accumulate in the receiver and rubber hoses, which will be good for reducing pulsation and forcing (maintaining) the necessary pressure for optimal operation of the airbrush, but the following questions arise:
1.excessive pressure relief is it necessary to make a relay regulator or tinker with a mechanical circuit? -Who will advise what
2. Will the compressor (nebulizer) itself die from long operation and high (for it) pressure in the system and being under this pressure?
3.How to adjust the airbrush which screws do what function?
thanks to all)))Zgіdno zі st. 8 According to the Law, in the development of the extension of the established guarantor, a line of shortcomings is in order, in the order of the line established by the legislation, I have the right to vimagati:
proportional change in price;
free usunennya of incomplete goods in reasonable lines;
vіdshkoduvannya vitrat on usunennya shortage of goods.
In the case of the development of the established guarantor, a line of absolute shortcomings, as a result of the provision of a product (seller, visitor) the rules of the agreement, I have the right for my choice of vimagati from the seller or virobnik:rozirvati contracts and turn rallies for goods pennies;
vimagati replace the goods with such a samy, or with an analogue, which is obvious from the seller (virobnik).
The price of vimogi will be displayed on the vibyr of the seller for the moment of buying the goods, or for the enterprise, if you are happy with the price of the trip.Video (click to play). Within 14 days, you can return the product that has NOT been USED and the presentation is preserved.
- Again, do not soak the main unit.
- To make your own solution, you must mix one part white vinegar and three parts water. For example, you can mix 0.5 cups of white vinegar with 1.5 cups of water.
- Most manufacturers recommend deep cleaning once or twice a week. If you are not sure how often you need to carry it out, then read the instructions. There such information is available.
- The best place to store clean masks and mouthpieces is in ziplock bags.
- Never wash the blower itself in this way. It can be wiped on the outside, but never wet.
