In detail: do-it-yourself geyser filter tap repair from a real master for the site my.housecope.com.
The problem is that it drips constantly and in the closed position. With a simple tap, everything is clear!
What do they do with the filter tap? Is it being repaired or replaced? And most importantly, how is it understood at all?
Inspect the valve carefully for connections. If the crane is of high quality, they are hardly noticeable. And if they are, you are in luck - the crane is collapsible. First, remove the handle, there is a small plug (1), under it is a screw. Then the decorative strip (2) must be removed by hand. Then the crane-axle box. In principle, it is also being repaired, but it is better, taking it with you, to choose for replacement from a reliable seller. If there are no connections (sometimes pressed-in) - the entire valve is for replacement.
And then put it back together?
The tap leaks in the open and closed state, how to fix it with your own hands, without the help of a master?
How a girl herself to fix a tap from the Aquaphor filter?
Step-by-step photo with description, video master class
Yes, this is really a pure water tap, not a mixer.
The tap means that there is only one eyeliner, cold filtered water.
Of course, you need to know why we are taking it apart and where the breakdown is.
But if in general, as in the mixers there is a crane-axle box, there may be a problem in it.
We remove the top cover, in some models it can be unscrewed, in others it is enough to pry it off with a screwdriver.
In the photo, the same cover is a black arrow.
The lid is removed, we remove the valve ("lamb"), just pull it towards ourselves, swaying slightly to the sides.
Next, the nut, see the photo above, green arrow, without unscrewing the nut, we will not remove the crane-axle box.
The nut (decorative) was unscrewed, then we unscrew the crane-axle box, inspect it, in principle, if you wish, you can also repair the crane-axle box, but it is best to take the old one with you, visit the store and buy exactly the same one.
Video (click to play).
Everything, then the assembly of the valve in the reverse order, the problem part is replaced, we open the water, check the assembly for leaks.
But in general, you can remove the gander and the entire tap from the sink, a complete disassembly for repair is simply not needed.
How to repair a tap for a drinking water filter is one of those problems that absolutely everyone faced. Small leaks do not seem to do much harm, but they can be pretty annoying. And if you do not pay due attention to the mixer on time, then you can provoke an emergency situation. Despite the fact that there are more than enough types, types of mixers in the modern plumbing market, it is quite simple to make repairs, especially if you know how. In order not to make mistakes during the repair, pay attention to the information that we have collected for you in this article.
Before repairing a tap for a drinking water filter, you need to disassemble it in order to identify the cause:
At the initial stage of work, remove the small decorative cover. Typically, there are two colored dots on this plate, which indicate that the tap is turned to add cold or hot water. If the direction of fluid flow does not match, turn the cover over to the opposite side.
Once you have removed the decorative cover, inside the hole you will see a screw that is there to hold the lever in position. You can unscrew this retainer using an ordinary or Phillips screwdriver. There are times when in order to remove the tap, you need a hexagon.
Important! If you cannot loosen the screw with a screwdriver, the lock is rusted or the thread is broken, then pull the lever with force. The screw head should come off the plastic cap.
After you have removed the lever, remove the decorative cup.It so happens that this part also cannot be removed in the usual way. You can loosen the insert with your hands. In order to improve the effect in the place where you apply force, put a soft dry cloth.
Important! If you were unable to remove the cap by hand, you can use:
Before proceeding directly with the repair of the mixer, you must definitely shut off the water supply. Once the water is shut off, turn on the tap and wait until all residues have drained off.
Important! Considering that all work will take place extremely close to the surface of the sink, you can even cover it with a cloth. You can easily place an unnecessary rag in the place where the mixer is located.
The following procedure may differ slightly, given that there are different models and types of mixer used. But here is the general picture of crane repair looks like this:
First, you must get rid of the special decorative plug that is located on the front of any faucet. It is a measure of hot and cold water. There is a fixing screw under the plug, which you must unscrew.
Remove the lever itself. Do not use too much force, because faucets are often made from cheap alloys, and you can easily damage the structure.
Important! If the lever does not give in, you can sprinkle it with hot water for several minutes.
A decorative dome is located under the lever itself, which must be carefully removed.
Next, you must unscrew the clamping nut, which is designed to keep the structure in place.
It all depends on the type of mixer, inside the distributor ball and other elements of the articulated mixer can be located, as well as a plastic cartridge with ceramic discs inside.
Important! If we talk about distributor balls, you must make sure that the balls themselves are intact, then check the condition of the gaskets, springs and seals. If necessary, replace the damaged elements. If you have a cartridge installed, then carefully remove it and head to the nearest store in order to find a replacement.
There are usually rubber seats under the cartridge which deteriorate over time. Wash off the remaining dirt and other debris that got in during the operation.
If you are replacing a cartridge, carefully clean the seat itself from corrosion. During the installation process, make sure that the clips fit exactly into the grooves, otherwise the mixer will not work properly.
In the event that the repairs made could not bring a visible effect or only partially eliminated the problem, then find other possible causes of the malfunctions.
A clogged aerator can cause the water pressure to be very different from what it would be in the bathroom. In order to correct this problem, remove this element and clean it thoroughly.
Important! If rust is the cause of its malfunction, then you will have to completely replace it in order to repair the tap for the drinking water filter qualitatively.
A loud noise from the tap during water supply may indicate that the gaskets are not suitable for size. This is especially evident in those cases when the gaskets that stand there, you cut out yourself. In this case, disassemble the mixer and cut the gaskets.
The water supply at the tap can also be significantly reduced due to clogging of the connecting flexible water pipes or hoses. After cleaning the mixer, replace the old hoses with new ones, as various deposits can form on the old ones. As a result, they will lead to repeated failure of the hinge or the cartridge.
If the mixer is located in the bathroom and when bathing, the lever, which is responsible for switching the direction of the water, lowers on its own, then simply replace the gasket.It is hidden under the spool itself.
Important! To perform this procedure, it is not necessary to dismantle the mixer, you can simply unscrew the nut, remove the hose itself, then change the gasket and return everything to its place.
It is much more difficult to change the lower gasket, because it is necessary not only to disconnect the hose, but also to dismantle the adapter along with the spout itself. Next, completely remove the switch, spool and eccentric, then change the gasket and assemble everything in the reverse order.
Important! Hand-made repair of a single-lever mixer, in fact, is quite simple and does not require special skills and knowledge in the field of plumbing. The only thing that you must always remember is that these devices do not tolerate abuse.
Of course you can. For this:
Examine the faucet carefully for joints. If the faucet is made conscientiously, then they should be invisible. If they do exist, consider yourself lucky, because the crane is collapsible.
First remove the handle - there you will see a small plug with a screw underneath.
Then remove the decorative strip, which should be removed by hand.
After - the crane-axle box. In principle, it is also being repaired, but it is better to take it with you, choose a replacement from a reliable seller.
Important! If there are no connections, that is, the valve is pressed-in, change the entire valve.
